Sliding table do-it-yourself drawings. Self-made dining table of different types

One of important details in the house can be considered. It is a symbol of comfort, warmth, hospitality, it organizes the space of the dining area around itself and emphasizes the chosen interior style. Suitable for material, design and finish, you can pick up in the store or order furniture company, but it is also possible to make a dining table with your own hands. Enough to have necessary materials, tools, and clearly follow the instructions.

dining table design

Not always in the assortment of furniture stores and shopping centers you can find the right one for you dining table. In addition, a hand-made object not only fits perfectly into the space, but also has a special energy and mood invested in it during the manufacturing process.

A standard dining table usually consists of:

  • countertops;
  • king belt or underframe;
  • transformation elements;
  • other parts, such as boxes.

Tables are transformable or conventional. For the manufacture of countertops is usually used natural wood or chipboard sheet. In some cases, glass and even stone are used, but it is better to entrust the manufacture of such options to a furniture company.

Countertop surfaces are sometimes veneered with plastic, veneer or decorative film simulating various textures.



Countertop options:
  • Sliding. The sliding tsargovy belt suggests the presence of a tab, when using which, the size of the table allows you to accommodate six more people. With a non-sliding underframe, there are no liners, the dimensions of the table increase by two people.
  • Retractable. Due retractable table top and a non-extensible tsargo belt, it is possible to increase the plane of the table for four people.
  • Mounted. Thanks to hinged structure, when lifting the lids, the tabletop can accommodate up to eight people.

The dining table has certain requirements that it must meet. First, the design must be strong and reliable. Secondly, from correct connection the legs of the table and the tsargo belt depends on the rigidity. Thirdly, sustainability is an important indicator of quality.

Creating a dining table, if desired, can be done with your own hands. Before you get to work, you should determine what kind of table design is needed. It can be a regular option for 4-8 people, as well as a transformer complex design. With no experience in carpentry, it is best to start with simple models using ready-made legs.


Wooden top option

Before starting work, the necessary materials and tools should be prepared: four ready-made carved supports of 730 mm each, wooden table top 1200 x 600 mm, four boards, two of which are 400 mm each, and the other two are 1000 mm, screws 30 mm each, drill, circular saw, planer, tape measure, pencil.

The first step is to carefully check the surface of the countertop and boards. which must be well ground and polished.

After that, short crossbars are attached to the legs of the table. To do this, it is necessary to drill two non-through grooves for screws, stepping back 15 mm from the edge of the leg. Then, according to the same principle, make long crossbars.

After the table frame is ready, you can proceed to connect it to the table top with screws. After that, the whole structure needs to be finished. To do this, the table is covered with stain for wooden surfaces, dried and varnished. The color is selected based on your own preferences. The most popular shades are: walnut, oak, cherry.

The legs for the dining table can be done independently. For this, it is necessary to wooden board draw the desired shape and cut it out with a jigsaw. The remaining supports are made thanks to the created template. It is superimposed on the board, outlined and cut out in the same way. Patterns on the legs are made using a milling cutter. The process of attaching the legs to the tabletop occurs by gluing.


The design of a book table usually involves the following components: a base, legs, stiffeners, a tabletop of 3 elements.

Materials you may need:

  • sheets laminated chipboard thickness 16 mm, size 3500 x 1750 mm;
  • butterfly loops in the amount of 12 pieces of 45 mm each;
  • corners for connecting the tabletop and the base, as well as corners for legs.
  • confirmations with plugs and self-tapping screws;

According to the finished drawing, a sheet of chipboard should be sawn. It is best to seek the help of a professional, since it is quite difficult to do this work on your own without damaging the surface.

The result should be: two worktops 860 x 690 mm, one worktop 860 x 320 mm, two posts equal to the height of the table and a width of 250 mm, two stiffening ribs for sliding supports approximately 480 x 180 mm, three stiffening ribs for the table base approximately 700 x 110 mm, four support inserts 700 x 60 mm, four trim strips 600 x 60 mm.


The assembly begins with the processing of the edges of the laminated chipboard with a melamine edge. You can entrust this work to a furniture company or a private master, and get already finished sheets with neat edges. On the basis, the places of fastening of the legs and loops are indicated. With the help of confirmations, the legs are assembled.

Next, you need to make a base. Horizontal stiffeners are fastened with an indent from the floor of 100 mm and from the bottom of the side walls - 70 mm. The upper rib is attached to the gap between the table top. After the small tabletop is ready, it should be attached large countertops with butterfly loops. Then the table is put on legs.

Kitchen extension table

The most common forms of countertops sliding tables are: round, oval, rectangular, rectangular with rounded corners. If a tree is chosen for the manufacture of the countertop, then first of all it should be prepared, that is, how the surface should be sanded and polished. Then you need to cut out the desired shape. Next, the tabletop is divided into three parts by sawing.

For the manufacture of supports, four bars 75 x 75 mm thick and 770 mm high will be required. They are machined to perfection. After that, you can proceed to the manufacture of crossbars for the tsar's belt. Having fixed the legs of the table on the underframe, you should install the guides on the long sides.


Sliders are attached to the countertop from the wrong side with the help of self-tapping screws. So, it will be possible to easily move and push apart parts of the tabletop, and for their tight fixation, dowels are installed at the joints and fixed with glue.

Dining table-transformer

If the creation skill simple table do-it-yourself already exists, you can try own forces in a more complex structure. The advantage of the transforming table is its compact size in assembled, and due to the complex transformation mechanism, it can be decomposed into a full-fledged dining area and accommodate up to eight people.

The first step is to determine the mechanism for the expansion of such a table. Gas lifts or springs are suitable for this role. It is recommended to use the spring mechanism, as it is easier to install and operate. In addition, this option looks more aesthetic, since the spring is inside the structure and is not visible from the outside. To make such a table yourself, it is best to prepare drawings in advance, as well as study the mechanism using the instructions that come with it.

Of the materials for creating a transforming table, you will need: sheets of chipboard, pipes with a diameter of 20 mm, a transformation mechanism, bolts, metal corners, nuts, hinges, self-tapping screws, washers.


Before starting work, you should prepare sheets of chipboard. For the tabletop, you can choose a thickness of 22 mm, and for the body - 16 mm. Edges are processed PVC edge under the color of the sheets.

First of all, the table frame is assembled for confirmations. Then a transformation mechanism is attached to it through the through method. To prevent the fasteners from being visible, false legs should be installed.

The tabletop must be fastened neatly and firmly so that the structure is reliable and can withstand heavy loads. The small countertop is installed first, then the large one. After the work done, it is necessary to check the mechanism in action.

To make a dining table with your own hands, you may need some experience and skills in working with materials. But you can be sure of the quality of such a product and be sure that the table will last for quite a long time.

We make a dining table that can be used in the kitchen with our own hands from solid wood. Having a small set of the most common tools and the right amount of parts, it is possible to assemble the table at home. Although of course it is better to do this in some kind of separate room.

The design of the table is the most common, only turned legs and curly drawers are made. For the design, it does not matter, the legs and sides can be rectangular.
Tabletop from joiner's shield, although it is possible to use ready-made sheet material, such as MDF, or chipboard glued with plastic.

Table height 760 mm. , two-piece worktop, 620/800 mm in size. each. Medium insert size 380/800 mm. .
The size of a table-top in the put state is 1240/800 mm. , unfolded 1620/800 mm. , thickness of details of a table-top is 30 mm. .


Bars for legs with a section of 80/80 mm. , height 730 mm. , four pieces.
Drawers: Length 920 mm. , plus two spikes 45/80/10 mm. , two pieces.
480 mm long. , plus two spikes 45/80/10 mm. , two pieces.
The width of all drawers is 100 mm. , lower edge curly. you can draw a template by hand, you just need to ensure that they are paired, mirrored and the pattern is symmetrical from the center.

For the tabletop, joinery boards 800 mm wide were glued together. and 620 mm long. clean. Here the thickness of the parts is 30 mm. , but a thickness of 35-40 mm is also suitable. .
After measurement sliding mechanism, it turned out that it expands by 400-410 mm. . Taking into account the gaps, the central insert should be no more than 380 mm wide. .
The total expansion of the sliding mechanism in the extreme positions is 900 mm. . It is with this in mind that the side drawers are made 920 mm long. .

After all the details of the underframe have been prepared, we make markings and hammer the nests in the upper part of the legs. The spikes are made 40-45 mm long. , 80 mm wide. and 10 mm thick. . Nests on legs meet each other when chiseled.

On the tsargs, we cut down the spikes, mark and file the curly edge.
After sawing the edges, we align and pass the profile manual router. Profiles are for beauty, you can do without them, but it’s necessary to sand all the details well. A product of a different design in the article.

We adjust the details of the underframe and then glue it, squeezing it with clamps or stationary clamps.
The finished underframe is 730 mm high. , 640 mm wide. , 1080 mm long. , according to the dimensions of the legs.


We precisely adjust the details of the tabletop in size, at the joints we put three dowels, wooden or metal. So that when connected, the fragments get up exactly in their place. That is, it turns out on one edge of the dowel, on the other, respectively, nests.
After fitting the parts along the edges, we pass the profile, “moulding” with a manual milling cutter. Close to topic.

To mount the sliding mechanism, lay the tabletop upside down on flat surface. Then we put an inverted underframe on top and align the overhangs with the legs. Here, the overhangs of the tabletop are obtained by 80 mm. from all sides when folded. When unfolding the table, overhangs from the ends are obtained by 270 mm. .



Then it remains to remove the mechanisms, disassemble the countertop, sand everything well and paint it. Acrylic or polyurethane varnishes are suitable for a solid wood table.
Shades and tonings of your choice, it is better to use SUVs in terms of quality, they are more resistant to mechanical stress and abrasion.

A circle - perfect figure. It is no coincidence that it is he who has the most analogues in nature: solar circle and the disk of the moon in the sky, vegetables and fruits round in section, annual rings on the top of a tree...

It is noted that harmonious the shape of the circle also contributes to the psychological comfort person. Yes, to create laid-back informal atmosphere at business meeting use round table.

round table fine fits in in any interior, be it small kitchen or spacious living room. The lack of corners makes the table elegant, but more costly. budget decision will make him on his own. For all the seeming complexity, cutting and assembling a round table is not a problem for a home masters.

It would seem that everything is clear here - round countertop on legs. However, manufacturers offer such diversity round tables that run your eyes!

The first thing you notice is the amount supports. Options some:

  • one big central leg or cabinet;
  • 3 legs;
  • 4 legs;
  • some legs in the middle.

However, the number of legs design differences round tables are not limited. The table can have shelves, cabinet, sliding boxes and various add-ons. Like other tables, there are round folding and sliding, as well as transformers.


Barbecue table, also known as a barbecue table or a fire table.





It also takes into account such an important factor as dimensions the room for which the future table is intended.

We will manufacture little and very simple wooden table with three legs.

Materials and tools

In order to do wooden round table with your own hands, you will need the following materials:

  • beam, boards;
  • carpentry glue for wood;
  • metal corners(3 pieces for each table leg);
  • self-tapping screws;
  • waterproof impregnation for varnish.

Required instruments:

  • pencil, ruler, meter, roulette;
  • saw, jigsaw;
  • screwdriver or screwdriver;
  • drill and drills;
  • clamps;
  • brushes;
  • Sander and sandpaper;
  • building compass.

Manufacturing steps

Step 1. We coat the sidewalls with wood glue boards and put them together. We fasten the structure clamps. For additional strength of the table, you can fasten the boards slats from the wrong side.



Step 2 We draw a circle countertops. To do this, we use the construction compass. If it is not there, it is enough to fasten two bars with a self-tapping screw at the angle we need. Glue an awl to one bar with tape, to the other - pencil. Draw a line. After measuring with a ruler or meter, the resulting circle. If required, repeat the procedure or draw irregularities by hand.

Step 3 Electric jigsaw neatly we cut out the resulting circle. If the countertop is additionally reinforced with slats, then this procedure will take a little longer.



Step 4 grinder we process everything surfaces countertops. Grinding is very thoroughly, you can't skip anything. The edges of the table are rubbed with emery medium grain paper. on the table and ends there should not be a single chip.



Step 5 Table top edges round off up and down.

Step 6 The legs will be made of timber 40 x 40 mm. Cut to desired length - 70 cm sanding with machine and sandpaper. rounding all corners.



Step 7 On three sides, we fasten on each leg metal corner. It is important to fix all the corners in the same plane. To do this, put a leg on any even surface for attachment to the tabletop. We attach the corners and mark their location with a pencil. Then, in a position convenient for us, fasten corners to the leg with self-tapping screws. This should be done with each leg. This will make the mount more durable because all the corners will have the same position.



Step 8 We mark the location of all legs on the tabletop. For complete compliance, you can turn the table top and put it on the legs. Fasten the legs with screws countertop.



Step 9 From bars of the same or smaller size, as the legs, we make jumpers. We fasten them to the legs with self-tapping screws.



Step 10 We process all parts of the table water repellent by impregnation at least 2 times. Drying of each impregnation layer should be complete (8-10 hours). After that we cover the table varnish. It is enough to apply two layers of transparent varnish, 3-4 layers of colored varnish to get more rich shade.

Note: the surface of the table can be left natural, only emphasizing the natural beauty of wood, or decorate different ways.

Round glass table

Excellent option for manufacturing - hardened shockproof glass with a thickness of at least 5 mm. This glass is used to make many things, including - showers cabins.

This glass will withstand colossal load and will not break. It can only break pinpoint hard hit in the rib.

At the same time, tempered glass will not fly apart into pieces and fall many rectangular pieces that not dangerous for a person.

However, for cutting and processing hardened glass need special equipment.
At home, you can use to make a table triplex, matte or toned, as well as ordinary glass. If a cutting glass is not your strong point, it would be better to entrust this work specialist. He is professional cut out countertop of the required diameter.

Attention: self cutting tempered glass may damage the material.

Manufacturing steps

Step 1. Draw on a sheet of glass a circle. This can be done using compass, stuck in the middle sucker and sticking the needle into its center. Another option could be sample, cut from a sheet of whatman paper or other material. Apply it to glass circle marker.

Step 2 Flip the glass over facial side and clean it from dirt. We wipe soft cotton or microfiber cloth. The glass surface must be clean and dry.

Step 3 Lay a sheet of glass on a flat surface hard surface. In this case, we move the edge close to the edge of the surface. Begin cut from the farthest point of the marked circle. Cutting is done by one continuous movement. If used roller glass cutter, then first you need to dip it in butter(for example, machine). Then around the perimeter we carry out lines from the edge of the circle to the ends of the sheet. Should work sun.

Step 4 Under the circle of stele soft tissue or a towel and gradually break off all "beams".

Step 5 Clean under running water edge the resulting circle. Water will soften machining glass. Large burrs are removed with file, the rest is polished sandpaper coarse, medium and fine grit. The file can be wetted with kerosene(turpentine).

Step 6 Required for grinding drill or grinder with a special nozzle. On the nozzle is glued first sandpaper with coarse grain. Then you need to go around in a circle with medium-grit sandpaper and finish with fine-grit sandpaper. Necessarily round off edge edges (top and bottom).

Note: edge is processed low revs to prevent the glass from overheating.

Step 7 We polish the countertop with a circle of felt and polishing paste. If the glass is frosted, then polishing is carried out without paste.

Step 8 As supports for our table we take chromed legs with nickels, which are glued to the tabletop with a special glue, fixed with a UV lamp. In this way, you can fix the legs from any material.



Another way fastening the tabletop to the legs: drill holes in the countertop for nickels using a special drilling crowns with abrasive coating (sold in any hardware store). In this case, it is necessary to mark the location of the legs. In order to drill did not move from the intended place, you need to stick around the glass with plasticine and pour water there or cut a bar slightly smaller than the crown and put it inside. When drilling constantly add on a glass of water or wet the crown.

Another option - make from chipboard a circle the same diameter as the countertop, and insert screws into it around the entire perimeter with suckers. Such a connection holds much better if it is not glued simple glue for glass, and glue for UV lamps.

Attention: wear protective gloves or mittens when cleaning and processing glass.

Product finishing

Decorate ready product possible in various ways. Each of them will make the most ordinary table unique,

  • craquelure(artificial aging of the surface).

Design techniques glass table:

  • photo printing;
  • stained glass painting;
  • sandblasting treatment;
  • fusing;
  • decoration with various fillers.


How to make a wooden round table with your own hands, see video:

Fitting © 2022 Design and interior of apartments