We set up our own alarm system. We set the alarm on our own Car alarm pandora 3000 instruction manual

car alarm Pandora DXL 3000 - new model security complex of the DXL series, brought by the company's engineers to a high level of quality and reliability. Intuitive controls provide ease of use. The Pandora DXL 3000 alarm system is installed by specialists of service centers involved in the sale and installation of car security systems. Pandora is characterized by a high level of reliability and resistance to hacking using code grabbers, scanners and similar devices.

Keychain Pandora DXl 3000

An advanced keychain with a liquid crystal screen attracts attention. The system embodied in the Pandora DXL 3000 is considered one of the most advanced to date. The developers brought some innovations to the structure of the key fob, returning the end position of the buttons, which improved the ergonomics of pressing and ensured the tightness of the case. The function of sound confirmation of pressing notifies the user of each key press of the Pandora DXL 3000 key fob.

The LCD screen of the key fob, being its most fragile part, is protected by a silicone damper. This protection technology was first used by developers when creating a car alarm radio transmitter.

The damper protects the key fob screen Pandora alarms DXL 3000 from shock and extreme loads, while providing more accurate positioning of the indicator. The sealed case does not allow moisture, dust and dirt to penetrate inside, damaging the built-in chip. The Pandora DXL 3000 alarm comes with a small leather case for the key fob, which will be a pleasant surprise for many car owners.

Key fob functions

Developers in new version car alarms have retained LED indicators that display the state of protection, which is not bad and smart decision. The user can evaluate the performance of a two-way communication channel: a green indicator indicates the activation of the armed mode, a red indicator informs about the occurrence of an emergency situation or the need to transfer the car to the armed mode.

Basic car alarm functions

1. Interception of a radio signal, dialog code, electronic burglary protection.
2. Signal reception over long distances.
3. Automatic control of the communication channel.
4. Additional immobilizer that enhances protective functions Pandora car alarms DXL 3000.
5. 11 protected zones.
6. Double pin.
7. Tilt and movement sensors.

Equipment

The Pandora DXL 3000 alarm is supplied with the following configuration:

1. Central signaling unit.
2. Two key fobs - main and additional. The main key fob is equipped with a liquid crystal display.
3. Shock, acceleration, tilt sensors.
4. Protective cover for key fob.
5. Receive/transmit module.
6. Valet button.
7. Light indicators.
8. Limit switches.
9. Wiring harnesses.
10. Instructions for operation Pandora DXL 3000.

Car alarm features

The Pandora DXL 3000 security complex is equipped with an improved version of a multi-channel high-speed radio path. The changes affected the transition during signal reception and transmission to free channels, service and working channels were optimized, adjustments were made to the circuitry of the cabin RF module. Such measures made it possible to increase the operating range of the warning channel and the command channel, and increased the stability of the system in the presence of interference.

The developers have optimized the LCD key fob, lowering the level of energy consumption and increasing the life of the batteries. The only drawback of the changes made was the incompatibility of key fobs and RF modules of different alarm models.

Encoding algorithms

The Pandora DXl 3000 alarm system is distinguished by the cryptographic strength of the dialog authorization algorithms. Electronic hacking of car alarms is impossible due to the use of a complex coding algorithm and unique keys encryption. To date, Pandora car alarms are the only security systems that use dialog coding and two-way communication not only in the main, but also in additional key fobs.

base unit

In the Pandora DXL 3000 car alarm, the base unit has been redesigned, which is now equipped with ample opportunities for programming timer channels. The main innovation is the entry of a PIN code to access certain functions and system options.

According to the instructions, Pandora DXL 3000 uses two instead of one PIN: Service-code and Master-code. Using the service code, you can transfer the system to the maintenance mode or enter the programming and settings mode of the security complex. Given code factory, so if desired, the user can change it. The Master-code system allows you to emergency disarm the car. The meaning of this code is indicated on the plastic card supplied with the car alarm.

System Setup

The car alarm comes with a table of commands and statuses that allow you to configure the security system. This table lists the vehicle code supported on the CAN bus and information that includes all the features of the integrated interface.

Car alarm programming begins with the choice of brand and model vehicle and specific settings of the digital CAN bus. In the "Settings" table, the necessary parameters are selected, after which they are saved and recorded for further operation.

If the required code cannot be found in the table, it is entered manually. After the vehicle code is selected, the system parameters are configured.

The maximum functionality of the car alarm is realized when the following items are resolved:

• arming mode.
• Disarming mode.
• System management.
• Re-staging.

The car owner can additionally configure other system parameters. All settings are saved in a separate file, which is located in the root folder of the security complex and is available for moving or copying.

Car alarm installation

Installation of the security complex can be carried out as in service centers, and independently by the car owner. There are several ways to install a Pandora car alarm - under the dashboard, in the engine compartment, or in the passenger compartment or body of the car.

When installing an alarm in the engine compartment, the blocking relay is located near the ignition switch, and a shock sensor is attached to the steering column. For this, plastic clamps can be used to secure the main parts.

When installing a car alarm under the dashboard, the system control unit is mounted in the engine compartment. A blocking relay is attached between the branches of the duct.

The third option for mounting a car alarm involves installing it anywhere in the cabin or car body with the optimal location of all components. The base unit is located either in the cabin or in the back of the car, but the siren is installed under the battery pad. The hood end switch is attached next to the hood indicator on the right side, and the trunk end switch is installed next to the lock. The system is wired after the alarm is installed.

Installing the shock sensor

Shock sensors are installed last. The switch of the security complex - the Valet button - is located in such a way that it is not visible, but at the same time access to it is free. At the same time, there should not have been any electronics near her that could drown out the signal reception.

Connecting a car alarm to a personal computer

The security complex is connected to a personal computer via mini-USB. The base unit of the system is connected to the PC using the Valet button, while successful synchronization is confirmed by a light indicator.

After connecting the alarm to the computer, the LED starts to glow red-green color. For normal synchronization of the complex with a PC, a launch is required. software— Pandora DXL Loader. After starting the program, you need to enter the service pin code indicated on the card that comes with the alarm.

The code is entered by pressing the Valet key the required number of times corresponding to each digit of the pin code. The pause between button presses should not exceed one second. If this time is exceeded, such a pause is regarded as a transition to the next digit.

The indicator of the system block notifies the end of the input of each digit and its reception with a red flash. The programming of the Pandora complex begins after all the code has been entered, which is accompanied by a red and green flash of the indicator.

Instructions for Pandora DXL 3000 Go to product card 8 800 775 98 98 ch t h. www.sotmarket.ru database www.sotmarket.ru for information references, bases and opinions, CONTENTS......................... ................................................. ................................................. ..one ............................................... ................................................. ....................................2 .............. ................................................. ..............................................4 ... ................................................. ...............................................6 ..... ................................................. ................................................. .6 ................................................ ................................................. ...............7 ............................... ................................................. .......................................eight .......... ................................eight ................. ......................................... ..............................nine ................... ................................................. ...............ten .................................. ................................................. ........eleven ......................................... ................12 ................................. ................................................. ....thirteen ............................................. .................................nineteen , ............... ........................................20 ......... ................................................. ...............................................21 ... ................................................. ......................................22 ........... ................................................. ....................................23 .............. ................................................. ................................................24 ......... ................................................. ............................... ...........24 ...................................... ...................25 (? ?) ................................................ .............26 / ................................... ................................................. .............26 ................................... ................................................27 ( ).......................... .........................................27 ....... ................................................. ................................................. ..........27 ? ?................................................. ................................................. ....................27 ............................... ................................................. ...............................................28 ..... ................................................. ......................................28 ...... ................................................. ...29? ?................................................. ................................thirty ................. ................................................. ....................31 .............................. ................................................. ......31 ........................................... ................................................. ...............................34 .......................... ............................34 (? Valet?) ................ .........................................35 ........ .........................................36 ?HANDSFREE?().. ................................................. ....................36 ?AntiHiJack?()........................ ................................................. .......37 .......................................... ............38 ..................................... ................................................. ...............40 ................................... ................................................. ....... ...41 ............................................... ................................................. .........42 ........................................ ................................................. ......................42 ........................... ................................................. ...............................43 1 INTRODUCTION PandoraDXL3OOO, . PandoraDXL3OOO ? ? (???). , . Pandora DXL 3OOO? , . . , : , ; ; ; , ? ?. Pandora DXL 3OOO , . ? ? . , : ? ; ? ; ? . . : ? ; ? i-Button(TM), Proximity. , . , . , . , . , . , . Pandora DXL 3OOO , . (Microchip Technology Inc., SiliconLabs Inc.,) . 2300-650 . PandoraDXL : USB . , . . . , Keyless(, 14254-96. . , ?START?). , - ? 97), 50789-95, 50607-93. . . , . , SmartEntry: www.alarmtrade.ru: [email protected] ?:8-800-700-17-18(41.97-99 (6895-89), 29157-91, IP40 , ? , -2.1 (N-2.1) 15150-69 -400 +850 . . -100 +400 . 28751-90(. . , DXL Loader, www.alarmtrade.ru. 28279-89, +12 , 1 . , - , PandoraDXL3OOO,) 3 RF- - PANDORA DXL 3OOO SYSTEM FEATURES: ? . ? 11 . ? . ?16 . ? . ? . ? . ? , . ? . ? . ? . ? . ? . ? 1800 . ? 10 ? . ? / ? ? . RF ? . . . (/ , .) ?. ? , . . , . . . BM-103(M) . . , ?TouchMemory()? ?iButton? ??(? ? . - ? ? ? ? ? ? ? ? ? ? ? ? ? . ? ? ? ? ? . . (, . . .). 471/475/477/577).... 5 SECURATED ZONES OF THE VEHICLE PandoraDXL: - - - - - - (- (- - (- (-).) . ()) . (PACKAGE CONTENTS 1. ??? ???????????????? .......1 2. RF ..?????????????........................ ...................1 3. c .......................... fourteen. ............................................... .............1 5. ()...............1 6. ???????????????. ............................... ...............1 7. ???????????..................... ......................eighteen. ?........................ .................1 9. ?........................1 10 .?VALET??????????.................................................. ..............1 11. ????????????..................... .......................2 12. ........................ ...............................1 13. ()...... .........................1 14. ????????????.......... ................................................2 15. ?????????. ......................................2 16. ?4.2 thirteen?????????????.................................... .......5 17. 120-150 ????????.................................. .................2 18. ????????????????? ...............................3 19. ????..?????........ ...............................1 20. ??????.. .?????...................................................... ..1 21. ???????????????.................................. ..............1 22. .................................. .1 23. ..................................sixteen)) . . . . . . . . . . . . . . . . . . . . . . . TECHNICAL DATA, 40 9...15 433.075 -434.79 10 70 10 ?40° +85° , - - - - - - - - - - - - - , : , 1(CH1)(NC/NO), 2(CH2)(), 3(CH3)(), 4(CH4)(), 5(CH5)(), 6(R1)(), 7(R2)(), 8(R3)(NO), 9(R4)(NO), 10(R5)(NO), (), / - - - -RF- - - 650 , / , (. : (,),) 1800 , (- , AAA,1.5 1, 35 , : ,) 120x76.5x23 71.5x37x17 47x32x10 84x43x15 275x195x70: - 3 7.5+7.5 15 15 0.5 0.3 1 0.3 150 150 9 9 9 . , 7 SIGNAL TYPES? ?, / thirty . ? ?, thirty . ? ?, ? ?, ? ? ? / ? ? ?, ? ?, ? ? ?, ? / / / / 9 0.04 ./1 . 0.4 . one . 0.04 ./1 . 0.4 . ?, one . 0.04 ./1 . 0.4 . 2 2 . . ? ? 7/2/1. / / ?, 1 ?, ?, / / ​​/ , 1 9 , ?, / ?, . 7 1 4 - /3 7 . . fourteen ? . - /? 1.7 3 1 . . ? ?0.4. 7 1 . 0.04 ./1 . 0.41. 0.04 ./5 . ? / . 1 WHAT IS THE THREE-COLOR STATUS LED? ; ? , ? ?, ? ?; ? ? , ; ? ? , (); ? ? ; ? ? ; ? ? ?VALET?; ? *? ; ? *? ; ? *? ; ? *? ; ? *? ; ? *? ; ? ? ?Anti-Hi-Jack?. ? ? * 8: ?2? ? , ?. . PURPOSE OF PICTOGRAMS ON THE DISPLAY The icons flash in armed mode: 1. When the trunk is opened 2. When the hood is opened 3. When the door is opened 4. During the light signaling 5. Preliminary level of the shock sensor 5.+6. Alarm level of the shock sensor 7. Preliminary level add. sensor 7.+8. Alarm level add. sensor 9. Brake pedal pressed 10. Vehicle movement/tilt detected 11. Critical low voltage on-board network 7. 8. 6. 1. 11. 5. 2. 4. 9. 3. 10. 9 ?? . . ? ?, sixteen . . , . . , ? . - ??????? ?3? 3 . 3 . ? !!! . . . . ?SEND? 10 ?ALARM? . . , (?. . , . . , ?MUTE?). , .). . , (, Informative pictograms - - - - - - . ? - . - - . . ; ; - , ; . , ?? - ; ? , ; . . , ; . 25% . , - ; - . , ?. , . . ); , ; - . / - , . 25-50% ? , ; . ?; ; . , RF- ; - , (, - - . 50-100% . ; ; , - - - ; ; - . . 11 - - - - - - ; - . . . ; - - - - - 12 . . . . ; 2. 3 4. , ; - - - 1). . . . ; . . . ; - Pictograms for displaying and setting the system, .?1? ?2?. ; ; - . - . ; (; ; . . ?3?, - -(.)? -()? -(- - - - ; - ; (. , . ; , :); : ; . . ; . ; - - - - - , ?START? : .; - -) ?1)? - (. , Anti-Hi-Jack. ? . Icon assignment and control, ?3?: 1. ; 2. 3. . ?3? ?1? ,a ?2? . , ?. ?3? . , . .?1? - ;?2?.13 CH1- : CH1, CH2- , CH3- : (, CH4- 14: .). : ? : CH4 , 10 .(: (, ? , ?CHECK? ,) ? 3?2, ?2?- - - - . . . ?1? , - .?3? ?1?, . . ?3? ?1? , . ?2? : 1 ?2?CH4. ?2??3??2?CH1).?3?CH3. : .CH2.CH3: :CH2: ?1?. ((10).10) , ?CHECK?, ?2?() .60 . : : 1. (?2?- ?3?. 3. . 5. 6. 7. / ?1?- /).). . , ?), ? : 1 7 (.).), (, ? .), ? .) . ?2?-?3?. -). : . . ? ?2?- . ((?3?. . ?2?- ? ?3?. ?2?- ?3?. , ?2? ?3? ?3?.) - . .(?1?(. ,), ?2 ?- ?3?. II-4.4.-4.6 ?(?2?- , ?3?, ?1?- ? , ?2?.). ?- : (). : ?2?. 10- . : (?1?- 4. , (2. / ?1? ?). (. - . . - - 15 8. , ?1?- .( - - - , 1 . ((, : ()? ()? ?2?, ? 10 . .), : ?2?-); . - - - . . ?3?. ?3? - : . .(: , ?1? .?2 ?1? ?)? .?3?. ?1? ?2? . ,)? 3 . .(- ?2?-)? - ; ; - . .; . 16 ?2?. : ?one?. (one: ?). : - - - . . , . . ?2? ?one? ; ; . . (?one? . : - - - :). , ?12? . 3 . : . one .), . ?3? - . one . - -fifty. ?2? , -fifty. , - (. . ?2? . ?1? . . - , 3 ?2? ?2? , . . , (. . . ; ; , . , ?1? ?1? 17: 3- 1. 2. 3. ?3?, : - - , : : : 10 ; ?10 ?1?. ?2? - ; . , . , (?1? ?2? . . ?1? 3 . 3- - ?; ?3?, - ;? - ??. : ??. . ; - , : . :) ?2? ?Anti Hi Jack? : ?AntiHiJack?, : 18 - ? , : ; 1. 2. 3. , - ; : . ?, ?2? . ?; , ?2? . ?1? ?AntiHiJack?. ?AntiHiJack?, ?1? . . - , : ?. . ?HANDS FREE? - ?HANDSFREE? - - , ?2? 10 ? ?1? 3 .3- - ;) , ; . . ?HANDSFREE? /477/577.10 10? . . . : : : ?? ? ?3? ?1? ?2?. : ?? ?..???3?,?3?1.,??.?(.),) 1.(,??..?3?,.,(?2.?1??2? -.?1? ?2?) ?3?, - 19 LIST OF OPERATIONAL FUNCTIONS CAUSED BY BUTTONS System disarmed Ignition on Close door locks without arming (short) (1 sec.) (2 sec.) Mode on?Ignition support? ( more than 3 sec.) Activation of the procedure? Software neutral? (short) Open door locks (1 sec.) Arming with sound confirmation Watch Mode?Search? - flashing direction indicators and beeps for 5 sec. Arming without sound confirmation Mode?Search? - blinking direction indicators without sound signals 5 sec. Remote engine start Open door locks, disable immobilizer Disarm with sound confirmation Open door locks, disable immobilizer Disarm without sound confirmation Off mode? Ignition support? (more than 2 sec.) Off ignition in remote and automatic mode. start the engine, turbo timer (short) Turn on the backlight of the key fob LCD display * (1 sec.) Turn on/off the timer channel (CH1) Open the trunk lock (CH1) (more than 2 sec.) Turn on/off the timer channel (CH2) (more than 3 sec.) Switch on/off the key fob* + +(short) Mode? Panic? + + (1 sec.) Enable active mode?Anti-Hi-Jack? + +(short) Arming with engine running with audible confirmation Arming after 30 sec. ?Hands busy? with sound + + (1 sec.) Arming with engine running without sound confirmation Arming after 30 sec. ?Hands busy? mute + + (1 sec.) Enable passive mode?Anti-Hi-Jack? : 20 System armed (no alarm messages) Ignition off, ?*?, - . . REPLACING THE BATTERY IN THE KEY FOB, . , . - : ? ? ? (. 1000 / . : : 6?9 . . . . , ?3? . . . , ; ? . , ;). . AAA DURA ELL, ENERGIZER. , (,) AAA Pandora DXL . 21 WORKING IN ARMED MODE, . Pandora DXL: - - - - - - () - () - - () - () - (() . . , . , ? ? , . . ? ? (), ?ALARM?. ?SEND?. () , . ? ? , . . () , . , . , . , . , ?SEND?(22). - . , - 15 9 , ? . , .), . :? ,).). . ? . ?; ARMING THE SYSTEM?1? . one .,- ? ?, . , ? ? , - . . fifteen . . . (, ? , : - ?(. .36). - , - ?, - , ? , ? ().) , - ? . (, (, 30 . . . (), (). ?, . , . . 2 . (,). . , . . , ; 23 (0-2 , . .). . (). , . , (, 15 .(, . , . 0-2 .) . .)________________________________ Press button (short) Close doors before arming Press button (1 sec) 1x 1 flash ~~ Doors close System arm Display 1 flash DISARM SYSTEM GUARDS ()____________________________________ ?2? , ()________________________________ , (?2?, 1 .,). ? ?, () , . , ? ?, ? ? ?CHECK? (. .33).30 . , _____________________________________________ ( ()____________________________________) Press button (shortly) Display 2 flashes 2x ~~ Press button (1 sec) 2 flashes Opening doors and disarming Display (? disarmed, system?) ___________________________ If you have not opened the door within 30 sec. after removal, it will automatically arm again and OPENING THE LOCK OF THE TRUNK, ?3? Press the button (1 sec) , . ___________________________________________ Trunk open, Display Display Shock sensor disabled If you open the trunk while armed, the trunk protection zone and the shock sensor will temporarily turn off. After closing the trunk or if the trunk is not opened within 15 seconds, then the system EMERGENCY CONTROL OF THE SYSTEM BY SECRET CODE (? ?) _____________________________ - - , (Master-Code) - : , ?VALET?. , ? ? ? _________________ . . . thirty , . PandoraDXL. "VALET" ;____ ?VALET?. ; "VALET" ; ? ______________________________________________________ ? "VALET" ? , . 3 ., : , - ?VALET? . PandoraDXL). . , . - 5 , . , . (. (Master-Code) 1-1-1-1, . - - (Service-Code) 25 DELAYED ARMING (?Hands busy?) , (,). ?1? ?3? , _________________________________________ , . ( 1 .) .?AUTOARM?, .30 , .() , . , ?2? ?1? ?3?. (?Press buttons (short) 1x 1 flash?) ___________________________ 30 sec ~~ + Press buttons (1 sec ) 1 flash 1 flash Doors close 1x system armed To cancel this function, press Display + or _________________ __ LOCK/UNLOCK DOORS, . /(). ?2? , . ? ____________________________________________________ ? , . . 5 , (). , ? . . ?12? _________________ . ACC Door closed ON Press button (short) OFF Display Door open _______________ 26 + Short 1x 1 flash ~~ ()_________________________________ AUTO ARMING, 30 . , . ______________________________________ ?AUTOARM?, . REARMING (ANTI-SCATTERING) , 30 . , . ______________________________________ , . . ?) ________________________ . (? (? ?.) VEHICLE SEARCH, . ?1? (? , . ?) ____________________________ ?1? , . _________________ Press button (short) Press button (1 sec) Display 1x 5 flashes _________________ Display 5 flashes? ? _________________________________________________ MODE ?PANIC??1??2?.?,?1??2?.?.Display?.??????? ().iButton, .iButton, ?2? .?0 .?. , ?2?, (iButton).?25.?(), /.25.., ().:??..?2?( iButton), . , . IGNITION SUPPORT MODE Pandora DXL , (), . . , 28 . : , . . , . . , ? ?. ? , ? ?. , (, (1 sec) Shock sensor is disabled in this function _______________________________ ~~ ACC ON OFF Press the button (2 sec) Display Doors open max. 2 hours (20 min) ~~ Leave the car, close the door Press the button (short) ~ ~ Doors closed Armed system Engine Display stopped Ignition boost time programmable Shock sensor off with this function ______________________________________ max 1 min ACC ON OFF Display Press the button (shortly) Display Open the door and get in the car You can start driving / _______________________________ REMOTE AND AUTOMATIC STARTING THE ENGINE PANDORA DXL 3OOO key fob sounds off?~~~~ Sound signals?. key fob on, buttons Display Press the button. flashing Press the button Icon Press to select the icon All key fob sounds are turned off, except for alarms and alarms. .Light?, and vibration signals.(), ??, .() , ?P? . . , . , . , . , (,) , . . 29 , ? . ? : ; (1 5 . ?. (ACC Securely lock the car with handbrake Press the button (3 sec) Get out of the car, close the door ~~ After 3 sec. the engine will stop, the system is ready for remote start Press the button 30 Doors closed the system is armed Display A melody sounds engine stop Display, OFF Without turning off the engine,) . OFF (.), ? : ON 1x .? ?. Procedure? Software neutral? ? : one. , . , . , . 2. .?1? 3(), . 3.). 4. , 5. 1 . ?one? (1 .() 6. 3 . , . , ; ? . 1 10 . ; - .) . - ? ? II-3.8? ? ? . ?, Remote engine start, ?1? (, ? . , (.? ?, .5 .7). 30?60 .(II-6.1-6.4). .). . ? _______________________________________ ~~ The system is armed, . The engine start melody sounds Press the button (3 sec) System The engine is armed to start the engine Automatic start modes are selected sequentially in the menu by pressing the button. The menu has 8 sublevels. Engine 1 running Display On Automatic start Display of the engine by a starter Duration of work of the engine is limited to 30?60 min. _______________________________________ p. II? 10.4 or the condition of warming up to t 0 of the engine ________________________________________ Automatic start modes are selected sequentially Off. in the menu by pressing the button. one .?. The menu has 8 sublevels. 3? On 1 On . Off Press the button to select the icon Press the button (2 sec) 2 engine start PANDORA DXL 3OOO On. Zoom Decrease Off 7 5 , On 8 6 ? : Enter the setting programming mode. . - Enlarge. Decrease Hours Minutes On Off , Reduce Zoom . On . Zoom Decrease Off Off Zoom Decrease Setting the selected modes Hours Minutes 1 .? 5 . 6 4 Engine stopped ____________________________________ 1 10 . Press the button to select the icon 4 2 Cancel Selected Modes On. ~~ Entering the settings programming mode The engine stop melody sounds (Hold the button, 2 beeps of the keyfob) Off. 7 Sounds The melody sounds the melody for starting the engine shutdown The engine engine is stopped by the starter The duration of the engine operation is limited to 30?60 min. ____________________________________ item II?10.4 or the condition of warming up to t 0 of the engine ________________________________________ 5 Automatic 3 ~~ ~~ (Hold, button, 2 beeps of the keyfob) . Press the button Press the button? ? (3 sec) Preparation indication Automatic start Display (2 sec) Display?2? , Indication of preparing to start the engine! If this procedure is not followed, 8 settings will remain the same. . Icon flashes when activated 31 Keyfob alarm sounds) melody Engine stop melody sounds Press engine start button (2 sec) Engine running Press Display Engine button (3 sec) Preparation indication Automatic start - System. The display is stopped to start the engine by the starter in armed mode ___________________________________ ? 3? ?START?, Duration?2? engine operation is limited to 30–60 min. 0 Automatic start modes p. II?10.4 or warm-up condition Input to engine t _______________________________________ mode. sequentially, programming is selected (Keep pressing the button. in the menu? 3?. ?1? settings? 2?. ~~ button, 2 beeps Sounds By pressing the button. The menu has 8 sublevels. key fob signal) melody select the engine stop icon 1 Press button 2 ( 2 sec) Engine running Display Engine on. stopped _________________________________ Off The automatic start modes are selected sequentially in the menu by pressing the button. 3 The menu has 8 sublevels. Hours Minutes Press the button to select the On icon. 1 2 Off On 5 Entering the settings programming mode 4 Increase. Decrease 6 Off Hours Minutes On 3 4 Off On Zoom Decrease 7 Off 8 5 On 6 Magnify .Reduce On Zoom Decrease Off Zoom Decrease Setting the selected modes.?1? 7! 8 Icon. Cancel selected modes flashes if activated, .?3? from autorun modes. ?Send? any / _______________________________ .?2?Incl. . , . Zoom Decrease Off ! Setting selected modes Door open Hood open Cancel selected modes Trunk open / : Off If this procedure is not followed, the settings will remain the same. Trunk open Door open?3? 1 .(. ?1? ?2?, Hood open If this procedure is not followed, the settings will remain the same. Movement detected / Handbrake not applied The icon flashes if the vehicle tilt is activated in any of the autostart modes. _______________________________ . ? movement / ?3?. Detected Handbrake is not engaged vehicle tilt 10 .), (32 (?START?) -) . , start Entering the engine mode of programming settings Automatic start Display By pressing the engine button to start the engine with a starter, select the icon. Engine operation time is limited to 30?60 min. 2p. II?10.4 or the condition of warming up to t 0 of the engine _______________________________________ are selected sequentially Press the button in the menu by pressing (3 sec) the button System The menu has 8 sublevels. in armed mode.Indication of preparation 1 Off. The engine is running. 3 The menu has 8 sublevels. Press button 5 (3 sec) System 1 in armed mode (Press the button to select the icon Indication of preparation for starting the engine. On ?START?) _____________________________________ ___________________________________ - (Enter), into the ~~ settings programming mode. Sounds Zoom. Decrease starter engine melody 8 4 Press the ~~ button (Hold Hours Minutes button, key fob beeps 2 times) The engine stop melody sounds. (2 sec) Display On On Engine Stopped _________________________________ Off Display 0 7 3 engine start 6 Auto start 2 On The duration of engine operation is limited to 30–60 min. warming up to t of the engine _____________________________________ p. II? 10.4 or the condition Off. - Enlarge. Decrease Off Engine running Engine stopped 4 Engine stop chime sounds Hours Minutes Press button (2 sec) Display On. 5,7,14 automatic - Start modes II-5.2?5.5 are selected sequentially in the menu by pressing the Off button. . , ~~ (Hold the button, 2 key fob beeps) On Zoom Enlarge Decrease Decrease Off Automatic start modes Entering the mode are selected sequentially programming 5 in the menu 6 in case of failure to perform this procedure of settings by pressing the Setup button. selected modes! The settings will remain the same. By pressing the button The menu has 8 sublevels. On 1 Select the Cancel selected modes?00? icon. . II-4.7 - ?/ 7 On 3 Movement detected/Increased. Decrease Handbrake Not Engaged Vehicle Tilt Hood Open Off Setting the selected modes 5 ! If this procedure is not carried out Decrease settings will remain the same. 6 Cancel selected modes / The icon flashes if any of the modes is activated On. autorun. _______________________________ Off Zoom Decrease 7 door, incl. Open, Off 30 0?60 . The trunk is open. . . ?START? Handbrake not applied Vehicle movement/tilt detected Increased (Decrease II-6.1 8 Hood open). Setting the selected modes! Cancel selected modes?START? The trunk is open. 4 Door openOn Off The trunk is open. Minutes Hours 8 Off . _______________________________ ?, Increased Decrease On - The icon flashes if any of the autorun modes is activated. Off 2. Door open / Hood open If this procedure is not followed, the settings will remain the same. The icon blinks if any of the autorun modes is activated. _____________________________ Movement detected/Handbrake not engaged vehicle tilt 33 Automatic start modes are selected sequentially in the menu by pressing the button. The menu has 8 sublevels. Zoom Decrease Entering the settings programming mode Press the button to select the icon 1 6 2 On. On Off Off 3 8 .II-4.3 , . Hours Minutes On) 1 7 (Off 4 ((? selected brane modes, ! 6 If this procedure is not carried out, the settings will remain the same. (?START?) 0 Icon 0?105 flashes C. if activated On ________________________________ 7 - - Off Increase from Decrease any autostart modes / Increase Decrease Increase Decrease 5 II-4.4-4.6 2).?). II-6.2.-6.4 Cancel Pictogram blinks if activated) 60.80 1050 any (from autostart modes. 1050) / ________________________________ Setting selected modes 1 Increase Decrease Off Movement detected/Handbrake not engaged Vehicle tilt Hood open Door open If this procedure is not followed 1 10 1 .? Movement detected/ Hood open Vehicle tilt 5. Pandora DXL TIMER CHANNELS (, . (CH5) . : ? ? ? ; ? ; ? ? ?; ? ; ? ; ? 34 . ?) (CH1-CH4), . ; Handbrake not engaged, . ? : ; , ~~ ~~ vibration signal vibration signal red. red ~~ ~~ vibration signal vibration signal red. red ~~ ~~ vibration signal vibration signal red. red flash flash? flash flash flash; flashes down Ignition Door open Pressed? The trunk is open The hood is open; Is the on-board mains voltage critical is the brake pedal on? / ; ? ~~~~~~. ~~ ~~ vibro vibro, vibro signal signal signal red. red red red, red flash flash flash flash flash Shock sensor, . Shock worked? Sensor, Add. sensor, aux. Sensor, Warning Level Detected Main Level Main Move/Tilt / Level Vehicle Warning Level In alarm mode, all icons?3? ?one?. alarm messages flash, the melody?Alarm? sounds, the vibrating alert works. If the owner is alerted to alarm messages, then the key fob switches to the reminder mode (single sound signal and flashes of the red indicator did not react). For - termination. alarm messages, press any button. To reset the current alarm event on the screen, short press the button. VIEWING THE EVENT HISTORY ON THE LCD KEYFOB _____________________________________ Pandora DXL , . , Temperature Temperature By pressing the button. 10 Engine display select Display Press the button. , (short) , icon During reception, the history of status information is transmitted to the key fob. events accumulated in the base unit during the period of absence of communication with the key fob. . Voltage. Battery LCD _________________________________ Event Time of event Reading events (10 events) Press the button to select the icon Press the button (short) Display Display To exit the viewing mode, you must press the button, or the exit will occur automatically after 60 seconds. 1 sec __________________ _________________ ?CHECK? ?3?. ?one? Clock, (), . Press the button. A few minutes?2? times, Display until flashing Replace the battery when you see flashing segments Alkaline cell. ?12? pictogram. AAA, 1.5V () 10- . _______ / ?3?, 60 . Enable On VEHICLE MAINTENANCE MODE (VALET MODE) Display Press the button several times until the segments flash Press the button repeatedly to select the icon Press the button repeatedly until the display flashes Turn on the maintenance segments mode Turn off Off Minutes Press the button Maintenance mode off The system is put into maintenance mode in the state? from security? with the ignition on. Display Press the Clock - 35 button. , . , . . . / ,). ?3? ?VALET? ?one? . ?2? . . iButton(). ?2? - (- CHANGING THE OUT OF AREA ALARM MODE. ?MUTE? ?3?. ?1? 3 ., . ?2? 3- : 1. ; 2. ? ?; 3. ? ?. "Loss of communication" Sequentially Press the button Press the button (3 sec) select the icon 10. Icon Press the button flashes select the icon? 471/475/477/577 ?HANDS FREE?, . . . . . 2.4 GHz , . ? HANDSFREE? 1. 2. 3. ?3?. . : ?1? ?HANDSFREE?; ?HANDSFREE? Press the button and disarm (short) to update the mode HANDS FREE ?1?, . . ?HANDSFREE?? 10 MODE?ANTI HI JACK? ?Anti Hi Jack? 3?, . . . - , - . . , . ?Anti Hi Jack? Passive mode 1(). , . ?AntiHiJack? , . , -?2?+?3? . , one . 37 2(3(4(. 5(30 ?2? 1 1 30 . . ., 30 . , ?Anti Hi Jack? , . . .). ,). ..). . . :). , . . Active mode 1(). , ?1?+?2? one . thirty ., . .). , 30 2(. . 3(). , 30 . . 4(). , . . . : . . , . , . ? . 1 way, . ? , (, . . ON n-times Display Siren. OFF n-times ACC ,? 2 way, ? , ?. 39 , 40 WARRANTY, . . , . (). ? ; ? , ? , ; ? ? ; ? ? .?3 . . . , - , - . , . ; , . - ;3.5 (. ,) , - - , - : ; (- , - , - / , - STORAGE AND TRANSPORT, 1° 40° , 80% +25° . , . 18 . . , . . . ? . , . () . . : : ?40° +85° ; : 98% +35° ; : 84 106.7 (630 800 . . .); 2: 157 / (15g) 10?15 . . , - 41 ACCEPTANCE CERTIFICATE PANDORA DXL 3OOO 4372-006-55684712-2006 . ______________________________________________ _________________________________________________ , . . (___________________________________________________) WARRANTY CARD PANDORA DXL 3OOO ______________________________________________ ?____?______________________20____ . _____________________________________________________________ () _________________________________________________ PANDORA DXL 3OOO WARRANTY CARD ______________________________________________ ?____?______________________20____ . ____________________________________________________________ 42 () _____________________________________________ INSTALLATION CERTIFICATE, ______________________________________________________________ , . . . _____________________________________________________________________________ , . . 43 44 Pandora DXL 3000 Description fml ni di nl n 2 mins Notes & Feedback

Pandora DXL 3000 is the second evolution of the DXL platform, which AT engineers have developed further, making the system even more perfect and convenient, both in operation for ordinary users and in installation for installation center specialists, while maintaining unsurpassed resistance to electronic hacking and functional opportunities.

The first thing you can pay attention to is a new double-sided keychain with an LCD indicator. Its design was developed taking into account the experience of the DeLuxe and DXL 2500 models, and today it can be considered the most advanced among two-way car alarm key fobs. One of the most important innovations is the return to the end location of the system control buttons, which received a new revolutionary suspension system that provides excellent tightness, ergonomic pressing, and, thanks to special stops, which excludes the possibility of mechanical damage. In addition, the Pandora DXL 3000 implements confirmation of pressing the key fob buttons with vibration and sound detectors.

A large part of the changes remained invisible to the eyes - the design of the case of the double-sided key fob was developed and manufactured according to state of the art technology using new casting methods that provide high mechanical strength while observing the minimum dimensions, and the most fragile element - the LCD indicator is protected by a special silicone damper, first used in the anti-theft system key fob. This damper not only protects the indicator from mechanical stress and shock, but also prevents the penetration of dust and moisture, and also contributes to a more accurate positioning of the indicator. As a result new keychain from "Pandora" in terms of ergonomics and the level of impact resistance, resistance to mechanical damage, and perhaps in this it will become a leader among such systems. By the way, a leather case has reappeared in the system kit.

At the same time, many users will find in the new model familiar details that have already become an integral part of all Pandora double-sided systems, namely LED status indicators - a solution that is convenient and simple, like everything ingenious. The user can instantly evaluate the operation of the feedback channel automatic control system: if the green LED is flashing, it means that the system is armed, the key fob is in communication with the base unit and there has been no encroachment on the car. The red indicator, on the other hand, informs the owner about an emergency situation: loss of communication with the car, skipping an alarm event during the guard period, or works as a reminder of the need to arm the car.

A lot of changes have been made to the operation of the key fob, which increase the ergonomics of its use, taking into account operating experience. Changed illogical schemes for accessing quick access functions, changed the order of calling user menu functions. Added indication of the lack of communication between the key fob and the base on the LCD indicator, i.e. now, when there is no connection, not only the red LED flashes, but also the antenna icon on the LCD starts flashing. This is done in order to understand the communication status not only in a darkened room, but also in bright sunlight, which will make it difficult to see the flashing color schemes that the status LED gives out. An important function of the upcoming event warning has been added, which will warn the owner about the expiration of the time interval for starting the engine, or about the upcoming auto-arming. Having received a notice of an imminent engine shutdown, the owner can now, if necessary, extend its operation by five minutes by pressing the first button for three seconds.

The Pandora DXL 3000 uses a new version of a high-speed multi-channel radio path, in particular, the algorithm for switching to free channels during signal reception and transmission has been changed and seriously improved, the grid of working and service channels has been optimized, and the circuitry of the cabin RF module has been changed. Thanks to these measures, the range of both the command channel and the warning channel has increased, the stability and quality of the system's operation in conditions with a high level of interference has been seriously increased. In addition, the circuitry has been optimized in the LCD key fob, in particular, power consumption has been reduced and the lifetime of the AAA battery has been increased. the only point of contention in addition to the acquired indisputable advantages over its predecessor, there was the incompatibility of key fobs and RF modules with previous models. But this is a bookmark for the future, compatibility with the protocols of the next expansion of the DXL-3300 and DXL-3700 line.

Pandora two-way alarms have always been famous for the unsurpassed cryptographic strength of the dialog authorization algorithm used when receiving and transmitting commands over the air, developed by engineers from the Experimental Instrumentation Plant and Pandora DXL 3000 is naturally no exception. A record-breakingly complex coding algorithm and the use of 80-bit encryption keys unique for each product completely exclude the possibility of electronic hacking of systems not only at present, but also in the foreseeable future. By the way, Pandora two-way car security and anti-theft systems are the only products to date that use two-way communication and dialog coding and in additional key fobs (without an LCD indicator).

Outwardly unchanged, the Pandora DXL 3000 base unit will delight users and specialists of installation centers with more opportunities when programming timer channels (the ability to work timer channels only in the "guard" mode has been added). But the main innovation is related to the procedure for entering a PIN code for emergency removal disarm the system, enter programming or maintenance mode.

In Pandora DXL 3000, one PIN code has been replaced by two: Master-code and Service-code. The service PIN code, as before, allows you to enter the system programming menu or put the system into maintenance mode, however, these operations are available only in the "disarmed" mode. This code has a factory value, which, if desired, the installation center specialist or the user can change. But the car can be disarmed in an emergency only with the help of a Master-code unique for each system, the value of which is stored on a special plastic card under a protective layer.

Thus, we have completely eliminated the possibility of a situation where the car owner operates a car with a factory, identical for all alarms, PIN code value, without bothering to change its value, nullifying the efforts of developers and engineers aimed at improving security and anti-theft capabilities.
At the same time, our novelty remains a very simple and ergonomic system in use, which has no competitors in terms of functionality. In the asset of the system 11 protection zones, the status of which is displayed on the display of a double-sided key fob, 9 independent timer channels, as well as a flexible programming system that allows you to implement the most complex security and anti-theft systems. By the way, thanks to these features, Pandora DXL 2500 has become a favorite of professionals involved in copyright protection against theft, and the capabilities of the new "three thousandth" model have become even wider.

Our engineers have also optimized the circuitry of the main unit, which uses the most modern electronic components, thanks to which it was possible to achieve a slightly lower power consumption while increasing the performance and reliability of the entire system as a whole. Even such “little things” as the design of the Valet button and the LED indicator case were not left without attention. The first received smaller dimensions and a different shape, which allows you to install a microswitch in almost any hidden place in a modern car. Well and led indicator can now be proud of a collapsible case, which involves two options for fixing on the front panel.

The business of every motorist is to install burglar alarm. This applies, at least, to those who do not want to be left without a car. And in order not to spend extra money, you can independently install any alarm, even as reliable as Pandora dxl 3000.

Alarm Pandora dxl 3000

What is Pandora

This car alarm has auto start and belongs to the premium level. This system is the newest generation of car alarms, which has a reduced main unit. It is equipped with ten independent channels with advanced programming options. The system is controlled by a new LCD key fob equipped with feedback, which uses an RF module of a modified type, due to which the communication range is significantly increased.

Also in this signaling is an improved principle that allows emergency shutdown and programming of the system. For additional security 2 pin-codes are attached, stored on a special plastic card covered with a protective film.

In addition, Pandora dxl 3000 uses a multi-stage interactive authorization, which has its own individual keys for encryption. This approach allows you to provide full protection of the system from hacking using an electronic code - a grabber.

Security alarm Pandora

Control block

1. Electronic burglary protection, dialogue code, signal interception.
2. Communication control using automation.
3. High range signal reception.
4. An additional immobilizer, the installation of which allows you to enhance the security properties.
5. 2 pin codes.
6. 11 security zones.
7. Movement and tilt sensor.

Alarm Characteristics

Alarm control unit

• Keychain with LCD display.
• 2 key fobs.
• Shock sensor with two levels.
• Bidirectional communication.
• Passive immobilizer.
• Pin - code for emergency shutdown.
• When disarmed, only the driver's door opens.
• The car is protected even when the engine is running.
• Entrance for an additional sensor.
• "Silent" security system.
• 10 additional channels.
• The distance from the car to the key fob is 1800 meters.

Functions for starting the engine

The Pandora dxl3000 alarm can be triggered remotely, automatically, depending on the time, engine temperature, on-board network voltage, time interval.

Pandora set

Alarm kit

This alarm is equipped with:

1. Central block.
2. 2 - key fobs, one of which has an LCD display.
3. Protective cover.
4. Impact sensor.
5. Acceleration/displacement sensor.
6. Transmit/receive module.
7. Valet button.
8. Light indicator.
9. 2 - by limit switches.
10. 10 - yu wiring harnesses.
11. Instruction.

How to install an alarm yourself

Alarm setting

In order to install the pandora dxl 3000 alarm, you will need a pair of screwdrivers, a drill, scissors, a soldering iron, wire and a knife. In the event that you do not want to remove the panel, then the alarm can be placed in the engine compartment under the noise insulation, in the area of ​​​​the pedal assembly.

Important! To do this, it is necessary to place a blocking relay near the ignition switch, while the shock sensor is attached to the steering column. This can be done with plastic clamps.

To install the alarm with the removal of the dashboard, you will have to carefully remove it and screw the unit to the walls of the engine compartment. In this case, the blocking relay sits between the air duct processes. There is another way, which involves removing the panels and optimal installation all components. In this case, the location of the Pandora dhl 3000 alarm can be anywhere in the cabin or body. As for the siren itself, it should be placed under the battery pad. To do this, the hood limit switch is placed to the right of the hood indicator, and it is advisable to install the trunk limit switch next to the lock. When these manipulations are completed, it will be necessary to separate the wiring.

Tip: in order to facilitate installation, it is recommended that the trunk and hood limit switches be moved towards each other.

Temperature sensor fixed on the air duct

Relay module installation

Installing the shock sensor

The last step in the installation of the alarm is the installation of a shock sensor. Here it is very important to hide the switch from the alarm, while it is important to make it both invisible and easily accessible, it is also recommended to give preference to a place where there will be no other electronics that muffle the signal reception. After the installation is completed, the alarm will need to be programmed.

However, as you can already see, connecting the alarm with your own hands is not such a difficult matter, the main thing is not to forget to disconnect the battery and find a really suitable place for the unit.

Tip: it is desirable that the unit is located in a hard-to-reach place and far from other electronics.

If the car will flash its headlights when the car is stolen, then you need to start with them. To do this, you need to conduct wiring to consumers. However, the polarity must first be determined. Next comes the connection of limit switches, as mentioned earlier.

How to connect an alarm to a personal computer

In order to connect the Pandora dxl 3000 to a personal computer, a mini USB cable is required. Successful connection to the base power supply is done using the Valet button and LED indicator.

Connecting to a computer

Tip: when connecting the base unit, remember that you do not need to connect external power to the system.

After the connection is made, the LED indicator will turn red - in green. Next, you need to run Pandora dxl loader. When turned on, the program will ask for a pin - a code that is a service code and is set by default.

In order to enter the first digit of the pin code, you need to press the "Valet" button as many times as the set number is. In this case, pauses when pressed should not be more than a second. If the pause exceeds 1 second, then this is regarded as the end of the input of the first digit and the transition to the next one takes place.

In order to make sure that the system has accepted the pin - code, you should pay attention to the indicator. When you finish entering a number, a red flash will appear. The rest of the numbers are entered in the same way. After entering all the numbers, a red and green flash will appear, after which the system will start programming. When the system is started and defined, the installed firmware version for the system unit will appear in the upper right corner.

How to update the firmware

The firmware version may not be the latest, so it is advisable to update it. The latest version can be found at www. alarmtrade. ru. To update the firmware, you will need to click the "Download" button and select "Download Firmware" in the window that appears. The system will download the file. pld, which will need to be selected in the Pandora dxl loader program. Next, click the "Download" button, and the program will automatically start updating.

It is important that the update process is not interrupted, so the unit must not be disconnected from the computer. When the download is complete, the information window can be closed. In this case, the main window should not be closed. To exit the software change mode, the USB cable must be disconnected for a few seconds and reconnected. If the system has latest version, then you can not update the firmware and by connecting the unit for the first time and entering the pin - code to configure the system.

How to set up the system

Before setting up the system, you should open the table of statuses and commands, which is included in the kit. It contains the code of the car, which is supported by CAN. It also contains information that includes the functionality of the integrated interface.

Program interface

Programming must begin with the choice of the make and model of the car, as well as the settings of the digital CAN systems. To do this, select the 4th table "Settings", and in the window that appears, select desired parameters. Then click "Save" to save the settings.

In the event that the required code is not in the table, then it can be entered manually.

After selecting the vehicle code, the system parameters are configured.

In order to implement the maximum functionality, you need to enable the following items:

1. Security system management.
2. arming mode.
3. Arming mode.
4. Repositioning.

You can also configure other settings if necessary. The main thing is not to forget to save everything. In order to save the settings in a file, you need to select "Save" in the window that appears.

The file is then given a name and everything is saved. The file will be located in the Pandora alarm root folder and will be available for both copying and moving.

Car alarm installation

Developed in 2010, the second generation of Pandora alarms belongs to premium class systems. Equipment received new method encoding of transmitted commands, providing high resistance to interception and decoding of the signal. The instruction manual attached to the Pandora DXL 3000 contains recommendations for setting up and using the complex on various vehicles.

[ Hide ]

Functional features of Pandora DXL 3000

Overview of the main functionality Alarms Pandora DHL 3000:

• activation and deactivation of the security mode with separate buttons on the key fobs;
• remote start of the engine by a signal from the control panel;
• automatic warm-up of the motor on command from a timer or temperature sensor;
• starting the engine at specified intervals (without the participation of the driver);
• a turbo timer that provides uniform cooling of the supercharger housing;
• built-in ignition support system without a key in the lock;
• guarding a car with a running power unit;
• 2-stage shutdown of the complex and unlocking of door locks;
• automatic disarming;
• main key fob with built-in buzzer;
• individual melodies for various events;
• the possibility of expanding the system by installing additional elements manufactured by Pandora.

The Pandora DXL 3000 alarm has a reduced-sized main unit that is easily hidden in the car structure. At the same time, it provides 10 individual channels for controlling various equipment (directly or via relay).

Equipment Pandora DXL 3000

The standard delivery of the Pandora DXL 3000 alarm system includes:

• base unit DXL3000v, equipped with a built-in accelerometer and an autorun relay module;
• main remote control DXL073 with 3 buttons and control indicators (it is possible to supply the part in the i Mod version);
• 3-button auxiliary remote control R302L without display;
• antenna unit DXL 3000 with a call button on the main key fob;
• 3-color control diode together with a cable 1500 mm long;
• service key equipped with a 1500 mm wire;
• a power harness with a fuse that allows you to connect a regular central locking control unit;
• additional wire used for switching auxiliary sensors;
• pad for keys i Button with cable;
• power cable 1000 mm long with blade-type fuse;
• harness with block for installation on the main unit;
• temperature sensor of the power unit with a cable 3000 mm long;
• temperature sensor for the cabin, which comes with a 1000 mm wire;
• set of fasteners.

The photo shows appearance Pandora DXL 3000 signaling components.

Base unit Main keychain Auxiliary control Antenna module multicolor diode Service key Central locking harness Base unit main connector wires

Specifications Pandora DXL 3000

The security complex Pandora DXL 3000 has the following parameters:

• maximum current in standby mode - up to 40 mA;
• supply voltage of the base unit - 9-15V;
• carrier frequency of the radio control system - 433.075-434.8 MHz;
• number of independent radio channels - 10;
• the width of each channel is no more than 70 kHz;
• transmitter power - 10 mW;
• allowable operating temperature range — from -40ºС to +85ºС;
• the range of the transmitter in a 2-way key fob is up to 650 m;
• transmission distance of information by car unit - up to 1800 m;
• protection of power circuits - by standard vehicle fuses;
• the design of the base unit provides for a diode protection complex against polarity reversal;
• elements are mounted to prevent the consequences of short circuits at the alarm inputs and outputs.

To encode the Pandora DXL 3000 control signal, a dialogue cipher is used that cannot be intercepted for further use in order to open the car. The return signal is protected by the original dynamic code.

Advantages and disadvantages

Based on customer reviews, the DHL 3000 complex has the following advantages:

• the ability to adjust the autostart temperature in steps of 1ºС;
• the presence of the "quiet guard" mode - the notification is sent only to the key fob;
• range of about 100-150 m (in conditions of dense building in large cities - Moscow, St. Petersburg);
• software protection against false alarms;
• a set of sensors that determine attempts to tow or evacuate a car;
• regular event log, designed for the last 10 alarms or cycles of disarming and arming;
• stable operation in a wide temperature range.

Disadvantages of Pandora DXL 3000:

• there are defective key fobs that lose contact with the alarm;
• there are complaints about the power input, which requires relay isolation;
• high power consumption by the key fob (the life of AAA batteries does not exceed 3-4 weeks);
• overpriced (the disadvantage concerned systems supplied in 2010-11 for 20-24 thousand rubles).

Car alarm installation

To install and configure the Pandora DXL 3000 alarm, special documentation is required, which is available only from authorized centers.

When installing Pandora by unskilled specialists, interruptions in the operation of the security complex and the failure of its elements are possible.

Installation Requirements

When installing the Pandora DXL 3000 complex, a number of conditions must be observed:

1. The alarm controller and antenna unit may only be installed inside the vehicle. A similar requirement applies to sensors powered by the main module of the complex.
2. All component parts must be securely fixed, since the shaking that is inevitable when the car is moving negatively affects the accuracy of work. The main unit must have a hard connection as it is necessary for the built-in accelerometer to function correctly. It is allowed to mount the unit on thick bundles of standard wiring, while a slight decrease in the sensitivity of its sensors is possible.
3. All assembly operations are produced on a de-energized electrical network of the machine.
4. To install the siren, it is necessary to find a place isolated from water ingress and with limited access from the outside. The body of the product should not be exposed to high temperatures, as this reduces the measurement accuracy of the sensors. It is recommended to place the horn of the siren downwards, which helps to drain the condensate.
5. Connections of signaling wires are made by twisting, followed by fixation with tin-lead solders or clamps. Insulation is provided with fabric or PVC tape, heat shrink tubing is allowed.
6. When installing extended wires, pay attention to the material and cross section of the product. If you plan to use cables made of different metals, then you will need to reduce the electrochemical potential difference using a special adapter sleeve. Such joints require special careful isolation, since water vapor accelerates the process of corrosion and destruction of materials.
7. Connection points must be located in ventilated cavities, the crossing point should not be a zone of accumulation of water condensate. The laid wiring should not be pulled tight - this will ensure the safety of the joints during temperature changes or mechanical deformations of the car body.
8. Layed cables must not come into contact with movable body panels. At such points, the elements are protected by special corrugated tubes.
9. Holes made in the body must not have sharp edges that can destroy the insulation. It is recommended to install protective sleeves made of plastic or rubber.
10. Electronic control units are located at the highest possible places, isolated from the hot air supply. Device connectors are directed downwards, which reduces the concentration of condensate and corrosion.
11. Unused wiring harnesses must be carefully rolled up and insulated. Trimming is not recommended.
12. Do not connect to AC wiring. It is forbidden to use the complex on vehicles with a voltage in the on-board network of more than 12V.
13. Removing the standard fuses located in the alarm wiring harnesses and circuits of the machine is not allowed.
14. When using additional power relays, it is necessary to provide protection by installing fusible links.

The process of installing nodes and wiring

Sample installation process for Pandora DXL 3000 components:

1. Mount the main unit of the system inside the instrument panel or in the depth of the center console. This arrangement ensures the minimum length of wires; extension of the standard harness is often not required. Use screws or plastic ties from the delivery set. Mounting with 2-sided adhesive tape is allowed, but in this case there is a risk of destruction of the adhesive layer from temperature exposure. To reduce the risk of incorrect operation, it is recommended to use adhesive tape in conjunction with an additional mount.
2. Calculate installation point antenna unit on the windshield. The part is placed at least 25 mm from the edge of the roof panel. In this case, the "whiskers" of the antenna should be located at a distance of 100 mm from metal parts car body. In this case, the maximum range of the transceiver is provided. You should make sure that there are no metallized coatings on the glass and heating threads, this reduces the operating distance of the device several times.
3. Lay cable antenna module. The item should be as close as possible to metal frame body, but without sharp bends and contacts with sharp edges.
4. Decide on the installation point of the control diode, which should be read both from the driver's seat and from outside the car. The part is pre-mounted drilled hole on the instrument panel or decorative lining of the front pillar. Removal of the outer casing is allowed, which reduces the hole diameter to 5 mm. Additional fixation is carried out using rubber glue.
5. Install the Valet service button, while the driver must have easy and quick access to it. When manipulating the key, the owner needs to see the diode, this is one of the conditions for reprogramming a number of functions.
6. The cabin air temperature sensor is placed in ventilated areas away from direct sunlight or cold air flow from the air conditioner. The optimal point is the installation channel of the standard microclimate system sensor, equipped with an individual small-sized fan.
7. Mount the temperature start device on the engine block. It is allowed to place the structure on the metal elements of the cooling system. When installing the device at a distance from the motor, the accuracy of determining the temperature decreases. Since the sensor is designed for maximum heating up to +125ºС, it is not allowed to be installed on the elements of the exhaust system. It is recommended to cover the sensor mounted and fixed with a bolt or nut with a thermal insulation cover.
8. If the package contains iButton keys, then you should mount the contact pad of the reader near the driver's seat. The part is placed on steel or plastic elements car interior trim.

Engine lock

The Pandora 3000 series complex provides 3 options for blocking the engine start:

1. Built-in relay, which allows short-term current switching up to 20A. The device is controlled by a configurable channel, it can work to break the wiring of the ignition switch or to connect in parallel. In this case, it is necessary to provide blocking using other techniques.
2. External contact relays connected to additional timer channels that need to be programmed.
3. Digital relay switch type BM-102/103M, which is controlled by the dynamic code feed through a special wire. The device is connected to the same timer channels as the contact relays.

It is recommended to equip at least 2 different locks that work according to different algorithms, which provides increased security. The use of code devices further complicates the hijacking procedure, since the detection of the base unit is not a sufficient condition for deactivating the gap. The relay does not respond to the supply of additional power or short circuit to the body.

Due to its small size, the Pandora DXL 3000 engine lock can be integrated into the cable harness, making it invisible.

Algorithm for installing a coded protective device:

1. Strip the ends of the wiring from insulation.
2. Any black conductor is connected to the timer control channel.
3. Bring another wire with black insulation to the harnesses of the machine, which is energized with + 12V when the ignition is on. During installation, make sure that the potential difference in the wire is maintained under various operating modes. On the relay of the latest modifications, this cable received red insulation.
4. Cut the power supply circuit of the blocked node, insert the relay into the cut, connecting the ends to the cables with gray insulation.
5. Bring the green wire, intended for "learning" the device, to the timer channel.
6. To program the device, the ignition must be turned on twice with a pause of at least 2 seconds, the armed mode is deactivated. If the setting is successful, when the ignition is turned off for the second time, the relay will start. Otherwise, additional manipulation of the ignition switch is required.
7. After the relay has worked, turn off the ignition and separate the green wire from the timer channel. The element is taken aside and carefully isolated, it is not used during further operation.
8. Additionally, check the operation of the relay by turning on the ignition. After that, you can proceed to disguise the device, which is laid deep into the wiring harness and closed with electrical tape.

Wiring diagram

Pandora DXL 3000 Wiring Step by Step Instructions:

1. The siren signal wire is connected to plug 17 located in the main connector X8. The triggered relay sends positive momentum voltage (current does not exceed 3A). When using devices with increased power or 2 parallel sirens, an isolation relay must be installed.
2. Plugs 13 and 14 of block X8 are connected to external light signaling lamps (on board). It is allowed to supply current up to 7.5A, indicators of the direction of rotation are used for indication. When switching lamps of side lighting, outputs 13 and 14 are connected by a jumper. In both cases, power is supplied through plug 12 (in X8), the circuit is protected by a 10 A blade fuse.
3. Connect the signal wires of the limit switches to plug 11 (X8) when negative polarity and to 22 — at positive. Before installation, make sure parallel connection control elements, since on some car models the nodes have individual outputs. The alarm design allows simultaneous use of switches with different polarity.
4. Ensure the connection of the interior lighting control unit (if installed on the vehicle). The basic controller allows you to set a delay for turning off the light within 0-2 minutes in 1 second increments.
5. Connect the hood limit switch to point 9 in connector X8. To switch a similar element of the trunk lid, pin 8 is used in the same block. The type of polarity of the parts is set when programming the block. It is allowed to use standard switches or install additional ones.
6. Install the plug of the antenna module into socket X1.
7. If the owner plans to use i Button keys, then the reader is connected to the X5 connector. The operating modes of the device are programmed through the base unit.

The photo shows the wiring diagram for the Pandora DXL 3000 complex.

Location of buttons and indicators on the Pandora DXL 3000 control panel

Possible Pandora DHL keychain settings:

1. To set the buzzer, use the icon with the text "Mute". Switching off the signal is performed by button 1, connection - 2. With silent functionality, the icon switches to a flashing mode.
2. When installing an additional immobilizer type IS 471/475/477/577, it is possible to activate the " Free hands". To do this, the service icon is first “clicked”, holding down button 1 turns on the “Hands Free” mode icon. The parameter value is selected with key 2, the selection is confirmed by pressing the first one. The "Hands Free" option allows you to automatically turn on and off the guard when a special tag (from the immobilizer kit) is detected within the range.

Since dialog encoding is used for signal transmission, the only method of opening the complex is programming additional key fob. Such an operation is possible when transferring the car with a set of keys to a car service or to a point technical inspection. Therefore, it is not recommended to give the remote control along with the keys when trying to program additional device the main switch will stop managing the complex. After that, you will need to rewrite all regular key fobs within 1 session.

To control the number of key fobs programmed into the memory, the following method is used:

1. Disconnect and reinstall the negative battery terminal.
2. Carefully count the number of short beeps siren, which corresponds to the number of remotes in the memory.
3. Additionally, you can check their number by outbreaks orange control diode. To do this, you must turn off the security and turn the key in the ignition to the On position.

Features of maintenance and work with the Pandora switch are shown in a video shot by Sergey Maslov.

Clock setting

The algorithm for setting the clock value on the Pandora DXL 3000 key fob:

1. By quickly pressing the button 3 of the main key fob, select the shortcut responsible for programming the time. The 4-digit numeric field will then flash.
2. Use button 1 to set the number of hours, button 2 to set the minutes. Short presses are used, the values ​​​​switch only forward. If you press and hold the button, the fast scroll mode is activated.
3. You can exit the clock setting section and start setting the alarm by pressing button 3. To complete the setting, use a long press, the procedure will automatically terminate after 10 seconds. rest.

The procedure for setting the time in the Pandora DXL 3000 key fob

Alarm setting

To program the alarm clock in the Pandora DXL 3000 key fob, you must:

1. Press the button 3 to select the alarm clock icon (bell). After that, the label goes into a flashing mode, the text On or Of will be displayed on the time indication field. You can select a value using button 1 or 2, respectively.
2. Press 3 to go to programming the switch-on time. After that, the numeric field and the mode icon will start flashing. You can set the alarm value using an algorithm similar to setting the clock.
3. The setting mode is exited automatically or by long pressing the button 3. You can make sure that the device is active by the bell indicator on. When triggered, the icon flashes, interruption is carried out by pressing any key on the control panel.

The procedure for programming the alarm clock in the Pandora DXL 3000 key fob

Instructions for use

The Pandora DXL 3000 instruction manual describes:

• work of the main elements of the complex;
• key fob programming;
• features of automatic and .

Connecting a car alarm to a personal computer

"Signalka" Pandora model 3000 allows programming using a personal computer or laptop. Data transmission is carried out via a special cable or radio signal. The design of the security complex allows you to program the unit, both already installed on the car, and before installation. It is possible to read the current settings and adjust them further.

When carrying out work with the unit dismantled from the vehicle, power is supplied via the interface cable. When using a radio channel, it is required to supply voltage to the controller plug. Additionally, a Valet key and a 3-color status diode are installed. Details are required to enter the code number before programming.

The sequence of actions when setting up the block:

1. Prepare necessary equipment(cable or RF data module RMP 01/02). The DXL Loader program is installed on a personal computer, which can be purchased with the equipment or downloaded from the manufacturer's website.
2. Install the module into the USB connector and install the drivers.
3. Connect the alarm controller with a cord to the RMP 01/02.
4. Enter the setting mode by entering the code number.
5. Follow the instructions of the software, which will allow you to program the parameters.

To broadcast information over a radio channel, an additional RF module should be used. The manufacturer supplies a special RMP-RF equipment kit including such a device.

Neutral setting

The manual programming procedure in the Pandora DXL 3000 of the neutral position of the gear lever prevents the motor from starting when the transmission circuit is closed. The operation must be carried out only on vehicles with mechanical box without a lever position sensor. At the setup stage central block it is required to set the type of transmission, it is programmed in the factory delivery manual box. The available input for the position sensor is activated on the limit switch of the parking brake lever.

Detailed algorithm for manual control of the function:

1. With the power unit running, set the parking brake lever to the operating position.
2. Press and hold button 1 on the control panel for 3 seconds.
3. wait for a short sound signal siren, after which the ignition support and the standard immobilizer bypass system are automatically turned on.
4. Switch off the ignition and remove the key from the lock. After that, the 60-second delay mode starts until the guard is connected, the motor continues to work.
5. Get out of the car and close the door behind you. After arming with a key fob or a timer, the engine is turned off (after 3 seconds).

"Signalka" Pandora 3000 allows automatic switching on of program neutral when the brake lever is lifted and the engine is running.

The mode is prematurely deactivated in the following cases:

• the brake pedal is pressed;
• the handbrake limit switch has actuated;
• the ignition is switched off (when the relay is installed according to the “break” method).

Neutral setting in Pandora DXL 3000

How to remotely start a car engine from a key fob?

The sequence of steps for remote engine start with a Pandora DXL 3000 key fob:

1. Put the car on the alarm, having previously passed the procedure for confirming the neutral position of the gear lever. On a car with an automatic transmission, it is enough to rearrange the selector to the “parking” mode.
2. Press button 1 and hold it for about 3 seconds (until the key fob's standard buzzer beeps).
3. The shortcut to temporarily disable the zones of sensitivity of the shock sensor will become active on the display. In addition, the rotating fan icon will turn on, confirming that the system is ready to start the engine.
4. Will scroll crankshaft and engine start. The corresponding indicator will be displayed on the screen, the melody will be played. The unit will operate up to 1 hour (depending on the preliminary adjustment of the unit) or until the cooling system warms up to operating temperature.

The process of starting the engine using Pandora DXL 3000

If necessary, it is possible to prematurely stop the operation of the power unit in this way:

1. Press and hold button 2 for 2 seconds.
2. After giving a double jerky signal, release the key. The motor will stop, will be served Feedback in the form of a melody.

Engine stop procedure using Pandora DXL 3000

Programming of warming up or cooling down of salon

The Pandora DHL 3000 security complex allows for scheduled interior cooling or engine warm-up. To set the exact start time, automatic synchronization of data on the key fob and in the base unit of the complex is used. The presence of the control panel in the zone of reception and transmission of a signal for autorun is not necessary. It is possible to adjust the parameters only with the help of the main key fob with a screen.

Setting procedure:

1. With short quick actions on the key 3, select the Start icon.
2. Activate it with button 2 and go to the 8-position menu that allows you to customize the start functions. Movement is performed with keys 1 and 2.
3. Saving the selected parameter is carried out by pressing the button 3, and then - on 1. Pressing 2 leads to the cancellation of the set parameters.
4. The receipt of information on the base unit is confirmed by a double short buzzer on the key fob.

Description of heating modes:

• by timer, with repeats after 5, 7, 14 or an unlimited number of days;
• according to the temperature in the engine compartment (only below 0ºС), the warm-up time is in the range of 0-60 minutes;
• with periodic repetition from 1 to 7 hours;
• with a stop after reaching a certain temperature of the engine (60, 80 or 105ºС).

1 minute before the end of the warm-up, a warning signal is sent to the switch (if it is in the communication zone). The car owner can extend the operation by giving a start signal from the key fob. Each team extends the warm-up period by 5 minutes. Multiple time changes are allowed.

How to update the firmware?

The algorithm for uploading the new version of the Pandora DXL 3000 firmware:

1. Connect the base unit via a cord (the firmware cannot be changed in any other way). Insert the indicator diode and the Valet button into the sockets.
2. Launch the Pandora DXL Loader program preinstalled on your computer.
3. Enter the programming mode by entering the PIN code (default 1111). Entering is carried out by pressing the service key, a pause of more than 1 second should be given between the numbers.
4. Wait for the alarm type and software version to be determined, which will be displayed in the upper right corner of the dialog box.
5. Download the latest version of the software from the manufacturer's website.
6. Press the "Download" button, in the pop-up window select the "Download Firmware" option.
7. Select the saved distribution of the firmware, the file has the extension *. pld.
8. After that it will open additional window, which requires you to give permission to replace the software. In the process of "filling" the new software, it is strictly forbidden to turn off the unit or computer. The update takes up to 15-20 minutes.
9. After successful completion of the procedure, you need to close the information window.
10. Disconnect the cable from the base unit for a few seconds; do not close the program. Reinstall the cable and proceed to change the alarm parameters, since they are returned to the factory settings.
Completion of the procedure

Download free Pandora DXL 3000 installation and operating instructions in PDF format

Installation and configuration manuals for the Pandora 3000 alarm system can be downloaded free of charge from the links shown in the table:

What is the price

The cost of signaling is shown in the table:

Video

Video instruction for Pandora alarms from the "alarmtrade" channel.