How to make a flying kite at home. Types of kites. How to make a kite with your own hands: a simple flat model from the package

Many children's hobbies are interesting for adults as well. For example, launch boats or a kite. There are ready-made models for sale for every taste. But it is much more interesting to make a kite with your own hands at home. In addition, you can attract creative process children. Detailed master class will help to understand the intricacies of needlework even for beginners.

The first colorful kites appeared in China in the 6th century BC. e. They were used to solve various practical problems. For example, they threw the end of the rope across a wide pond or ravine, where they then installed bridges. Some Chinese commanders managed to use kites in a military environment.

One upgraded aircraft and launched it at night into the sky over the camp of his enemy. The snake made various sounds, frightening the enemy soldiers. So he managed to cope with the whole army - people counted the snake evil spirit and scattered in the morning.

Another commander, on the contrary, launched kites before dark, during the day, into the sky above the palace of one evil ruler. Moreover, the warrior used the length of the rope to calculate the exact distance to the palace itself. Having received the data, he ordered to immediately dig a tunnel of the required length.

Later in China, kites began to be used as attributes on holidays. They were made in the form of huge ribbon dragons and other mythical animals. It took great skill to make such a structure fly.

Now kites are used for various purposes. In Europe they are called "kite", there is a separate sport - kiting, where they fly on kites.

For ordinary people flying a kite with your own hands is a great pastime. You get special pleasure when finished model it's time to launch.

Types of kites

According to the design features, there are 3 types of kites:

A simple kite is triangular, diamond-shaped and other shapes. It's the easiest to make. This is flat design, equipped with a rope to adjust the flight. For beginners, it is better to start with making simple models.
The box also has a simple design. Its only difference from a simple kite is its three-dimensional shape. Most of the time it's a box. The wind enters through the holes inside the structure, which allows the kite to fly.
A serpentine train is several kites flexibly connected to each other. Such a design is able to fly, even losing a couple of links. Make it harder. You need to think over the frame, choose materials so that the finished kite takes off, carried away by gusts of wind.

What materials will be required

To make a kite with your own hands, you will need the following materials:

rails or special tubes (on the frame);
reel / winch (another similar thing on which it is convenient to wind the fishing line);
sheets of paper / cuts of fabric (torso of a snake);
strong thread / twine / fishing line / cord;
bridle (where the fishing line is attached);
materials and sketches for creating ballast - the “tail” of a kite that maintains balance (sometimes not required);
ready templates.

Difficulty depends on the type of kite chosen. Most of them you can do yourself, the main thing is to follow the instructions.

All materials are light, the design itself also turns out to be almost airy, and the shape helps to tack better in the wind.

Diamond Kite - product drawings

Simple, accessible to beginners. Make a snake will help object lesson and the following materials:

2 slats (one - 60 cm, the second - 30 cm);
plastic bag;
glue (or thread for stitching);
fishing line;
scotch.

Operating procedure:

Fold the slats in a cross. Secure them by tying with a piece of string or tape.
Cut the package and lay it flat on a flat surface. On top, lay the cross obtained from the rails. See that the package completely covers all sides. Measure out required amount canvases and carefully cut off the excess, leaving a little in reserve.
It turned out to be a rhombus. Pull the bag tighter over the rack base. Tuck the edges (stock), glue them or hem them carefully.
Tie a fishing line - one outside to the intersection of two rails, the second from below, to the corner of the diamond-shaped "body" of the snake. Tie tighter by making 2-3 turns.
Connect the ends of the tied fishing line with a knot, to which attach a long fishing line with a small coil. The bridle is ready.
From below, where the fishing line was previously tied, attach a colored plastic bag - the snake's tail. Remember, for the item to float, the tail must be 10 times as long as the actual base of the diamond.

bird snake

You can create a beautiful flying kite-bird and fly it in clear windy weather. Let it soar, cutting through the air currents with its wings!

What will be required:

Reiki sticks

8 short - 30.5 cm;
3 medium - 91.5 cm;
3 long - 150 cm;
nylon/film;
fishing line;
ruler;
coil.

Operating procedure:

Place two (150 cm) sticks in parallel. Across them, evenly place the third - the middle one, so that it is 59.75 cm (approximately, you can measure it with a ruler) from the edge.
Fasten the sticks with threads more tightly, leaving the required distance between two parallel (both 30.5 cm each), then between the others (2 and 3) it turned out to be the same (61 cm).
Make an indent of 30.5 cm (measure with a ruler) to the larger side, attach the second middle stick. Connect in the same way.
Attach 4 identical rails alternately ( optimal length 30.5 cm), placing them among themselves (distance 30.5 cm), at an angle. Their ends should form a triangle.
Having collected the ends of short (4 slats of 30.5 cm) even sticks, connect them with a medium stick.
Attach each stick with thread treated with glue. Before connecting, long ones must be moistened by dipping in plain water. So you protect them from breakage when bent.
Stretch the fishing line, connecting the ends of the resulting "wings".
Making a body. First, cut out a small rectangle (both sides will be 30.5 cm, height - 91.5 cm, plus 2 cm left for the collar). Then place a square in the center (30.5 cm - sides).
Now, from both lower corners of the resulting square, first measure to the left, then to the right equally at 59.75 cm. Put points.
Extend the line segments straight towards them, at both ends from the top, plus the bottom side of the pentagon itself. A complete canvas will come out with a small window.
Sheathe and carefully glue the base - the wooden frame of the craft.
Cut out 4 identical inserts - you will get squares measuring 30.5 × 30.5 cm. When finished, place them inside the “windows” and glue.
Form a ponytail using the rope and remaining fabric. Attach it on the edge.
Attach a homemade bridle, made earlier from two connected fishing lines, to the end of a long thread with a handrail (coil).

Advice! Tie the parts tighter, then the structure will retain strength and fly more smoothly.

Flat paper kite

You can make a kite out of paper yourself or with the help of assistants. Children love crafts, they are happy to collect boats and other toys.

To make a snake "Monk" you will need:

visual diagram;
sheet a4;
pencil;
scissors;
ruler;
thread;
rope;
glue;
ribbons (on the tail).

Operating procedure:

Take a sheet of plain A4 paper and fold it into a triangle, following the pattern. You will get a triangle and a separate strip. Cut it off and unfold the sheet. Instead of a rectangle, it turned out to be a square.
Draw a straight line with a pencil, connecting 2 opposite corners, select the axis.
Gently bend the sheet, trying to ensure that the sides of the square evenly “lie down” on the previously indicated axis.
Bend both corners twice.
On the sides to the central part of the accordion, glue the tip of a dense thread (30 cm). Form a "bridle". The kite is frameless, so the manufacturing technology is simple.
In the center of the resulting bridle, tie a long rope tightly.
The tail of a snake. Dial pieces of thread - 20 ordinary or 6 wool. Look, if the kite turns out to be small, then their total length will be at least 50 cm.
Connect the blanks and tie them with a brush. You can weave a long braid. Complete the tail with colorful bows or ribbons.
From the bottom in the corner of the "Monk" make a hole for which you tie the resulting tail.

Controlled kite "Monk" is ready. Instead of a coil, you can take a stick on which you will wind the extra rope.

Triangular kite made of polyethylene or bag

It is easy to make a beautiful kite from an ordinary large package, drawings the right sizes choose ready-made on the Internet.

What will be required:

a large multi-colored bag;
slats;
rope (analogue - fishing line);
glue;
scotch;
snake pattern.

Operating procedure:

The dimensions of the product must be estimated according to the actual dimensions of the package, the growth of the launching operator and the length of the rails. In the diagram, the values are shown in%. It is more convenient to independently determine which figure will be instead of 100%, then quickly calculate the remaining values \u200b\u200bwith a calculator.
According to the finished calculations, make a basic drawing and cut out the “torso” of the snake from the package.
Take 4 slats - 2 identical (they will be lateral), one longer (longitudinal), one short (transverse).
Attach the side rails to the sides of the "torso", then place the longitudinal one exactly in the center, the last - the short transverse one.
Make a keel and tape it to the center of the kite's body.
Carefully cut a small hole below the center piece. From ribbons or scraps of packages, form a long tail and thread it there.
Secure each corner of the snake with a fishing line, then connect them a little lower by tying a knot. Get a bridle. Tie the end of the fishing line with a small coil to it.

Potter's box kite

The Potter Design is original and hard to make, but it flies well and looks great.

What will be required:

wooden slats
1 meter - 7 pieces;
1.5 meters - one;
0.6 meters - 4 pieces;
plywood scarves - 16 pieces (1 mm thick);
durable fabric (analogues - package, film);
glue;
nails;
threads.

Operating procedure:

It will help to assemble the device detailed diagram. Externally, the "Potter kite" is a cubic shape of decent size.
Connect two finished frames 1 × 1 m - the base of the kite.
Glue scarves on all areas of fastening of longitudinal short rails. Also on the corners of both frames (connectors are suitable for tubes).
Important! Leave one spar (longitudinal rail) free until the frames are fastened.
Connect the frames by inserting the last of the longitudinal rails at the same time.
Now fasten the crosses - small plywood squares, they must be carefully installed in the space between the slats, nailed with small nails.
Snake cover. Cut the fabric, making two identical (32 cm) strips in width. Try the strips on the kite before cutting - just wrap them around and see that the edges come out 10-15 cm.
Fasten the fabric. The main thing is that she sat down tightly, without sagging.
Sew her wide belt.
How to tie a rope to a Potter kite. Separately cut out the postcards, then insert the cord into them (analogue is a long twine).
When finished, tie them first to the frame (long), then to the corners. Finally, sew the ends to the spar itself.

Flying a kite is one of the favorite pastimes for children. It is not only interesting, but also exciting. You always watch this picture as something special, it seems like a set of fabric, paper, planks and it soars, it flies over our heads, isn't it a miracle!? But about how to touch this miracle, how to make a flying kite with your own hands, we will tell in this article.
In total, several options for making a flying kite with your own hands will be offered, which one is right for you, you can decide for yourself.

Do-it-yourself flat Russian kite

To make such a kite, you will need wooden slats - two slats 560 mm long and one 320 mm rail, with a section of 2x8 mm - glue, strong threads, they are usually called harsh, a sheet of paper 440x300 mm in size. Lay out a piece of paper on a flat surface. Lubricate the wide side of the long rail with glue and apply it diagonally along the diagonal of the sheet. We also glue the second diagonal and a short bar.

After the glue dries, we tighten the upper bar so that a deflection of 30-40 mm is formed. Then we make a bridle. On the front side of the snake, at the crosshairs of the planks, passing the snake through the canvas, we firmly tie threads 500-600 mm long. We do the same at the crosshairs of the diagonals. But the thread here is 600-700 mm. Then we tie the threads so that the knot could lie on the top of the corner. We tie a handrail to the bridle. The tail is made of two threads 600-800 mm long and a thread 2-3 m long is tied at the place of their connection. various decorations- bows, pieces of colored paper. The snake is ready.
In addition to a simple rectangular snake, flat curly snakes can be made.

First, the base is made of slats, which is then pasted over with paper.

The second option for making a kite with your own hands

The first step is preparing materials. A sheet of thick paper, adhesive tape, nylon thread, a marker, two thin sticks.

Place a sheet of paper on a flat, stable surface.

We bend the sheet in half.

We measure the fifth part in width and draw a line. You can use a marker, or you can use a pencil to erase the line with an eraser.

We bend the parts of the sheet along the line, on both sides.

We get a kit for a kite.

Bend one edge and glue in the middle.

To strengthen the structure, glue the stick.

We unfold the paper (in this position, the snakes are “upside down”)

On the edge we make a hole for the handrail and strengthen it with tape.

And finishing touch- gluing a silk ribbon. She will serve as a stabilizer for the kite.

We tie the rail and go to launch the kite.

Do-it-yourself disco-plane kite by J. Bortier

The design of such a flying kite is not so complicated, it is a wing (in the form of a circle) with keels at the bottom and a system of lines.

The frame of the kite is assembled from slats with a section of 3x3 mm and a wire rim. The slats are glued crosswise and tied with threads with glue, and fixed with a wire with a diameter of 0.5 mm, which acts as a rim. The rim is fixed at the ends of the rails a) and b). The disc is retracted thin paper and glued on top of all rails and rim. Keels are installed at the bottom of the disk, giving the snake stability in flight.

Do-it-yourself two-box kite by D. Lavrishchev

The design of the kite is somewhat complex and will require a fair amount of experience and patience in the manufacture, but the result will also surpass all previous options.

To make a kite, it is necessary to prepare seven rails with a section of 10x10 mm. Four rails should be 950 mm long, two rails 1150 mm each, and one rail 1350 mm long. If there are no rails of the required length, then long rails are made of two rails connected by cuts and wrapped with thread with glue. At the prepared rails with a length of 1150 and 1350 mm, cuts are made at the ends and reinforced with wrapped threads with glue.

A strip of thick paper 1700 mm long and 330 mm wide is used as a canvas. Again, if there is no single piece, it is made by gluing several pieces together. The edges of the canvas are folded back by 10 mm, and one of the short sides is folded back by 20 mm.

Folding the strip four times, we get a box without a bottom with a side length of 420 mm. Do the same for the second box. Laths 950 mm long are inserted inside the boxes, glued and sewn to the boxes.
Then spacer rails 1150 mm long are tied to the frame rails crosswise. To the ends of the frame rails stretch marks - threads 1150 mm long. Spacer rails pull stretch marks - a1, a2, a3, a4.
Threads v1 and v2 are tied to stretch marks and to frame rails.

The wings are made, like the frame. The basis for the wings are slats 1350 mm long, and the wings themselves are made of thick paper. The edges of the wings are bent, a harsh thread is passed, and the rail pulls it. Then the bridle is made.

One end of the bridle is attached to the frame rail of the top box, and the other end is 120 mm from the bottom box. The snake is ready.

In the summer, children who are not busy with studies often begin to get bored. They need some really memorable and bright pastime! Let's fly a kite. Just don't buy it, mind you. It is quite easy to do it yourself. We offer 7 ideas of different levels of complexity.

Snake for the little ones

Everyone can do paper airplanes? So - this "snake" is just as easy to do!

You will need:

1 sheet of paper
Ruler
Pencil
Strong thread or fishing line
stapler
Hole puncher

Fold the paper in half along the short side. Along the top fold, measure two points 6.5 cm (point A) and 9 cm (point B). Take the two corners of your paper on either side of the fold and pin them together at point A. Punch a hole at point B. Take a long piece of string or string and thread it through the hole. That's all!

poly bag kite

It turns out that if you decide to make a snake while already on vacation, then everything is possible. Everything you need to make a kite is likely to be in your luggage.

You will need:

3 plastic T-shirt bags (or trash bags)
2 thin lungs sticks (pine slats, straight branches or reed stalks)
fishing line
Scotch
permanent marker
Scissors
Roulette
Superglue (preferable but not required)

Find 2 sticks - a long one 60 cm and a short one - 35 cm. Fold them perpendicularly, stepping back from the top of a long stick 15 cm. Fix the cross with tape. Wrap the ends of the sticks with tape and make incisions a centimeter deep in them. Pull the fishing line through these cuts, creating the outlines of the kite. Secure with tape from above so that the fishing line does not jump out of the incision. Lay the frame of the future kite on the polyethylene and circle with a marker, adding 1.5 cm on each side to the hem. Cut along the outline. Wrap the edges of the film inward around the fishing line and secure them with tape. The "body" of the snake is ready. We pass to the bridle. Tie two pieces of fishing line, 25 cm long, to the edges of a short stick. Do not forget to add an allowance for tying. For reliability, coat all knots with superglue, since it is difficult to make a strong knot on the fishing line. Tie the long side of the bridle to the upper end B (see drawing). After that, tie all three ends of the bridle together at one point and tie the handrail there. Additionally, secure this place with tape. Now make a tail. It is not made for beauty: by changing the number of bows, you can improve the flying qualities of a kite. Cut the bags into pieces 10 cm wide and tie them together to make a rope about 3 meters long. Attach the tail to the lower end of the kite with tape. Now decorate however you like! The kite is ready to fly!

pyramid serpent

Agree, it looks unusual, you will definitely want to make such a snake at least once in order to catch admiring glances on the beach.

You will need:

24 unfolded straws
Fishing line / rope
Ribbon
Fabric or wrapping paper
Scissors
Heavy paper for template
permanent marker

Since the manufacturing process is quite complicated, it is better to use our photo illustrations. But, just in case, add a description. Take 3 straws and thread them through the line. Tie the ends to form a triangle. Leave a small tip. Add two more straws and tie them to the opposite side of the base. Also leave a tip. You should get a rhombus with a crossbar. Now take another straw and use it to tie the opposite corners of the rhombus. It turned out to be a pyramid. Make 3 more such pyramids. Using a sturdy piece of cardboard, cut out a diamond shape to use as a template for wrapping paper. Cut 4 of these rhombuses from wrapping paper and glue so that the rhombus covers 2 sides of the pyramid. Focus on the drawing. Tie all protruding ends together.

Serpent - box

Although this form of kite is now quite rare, this design flies very well, and making it is easier than it seems.

You will need:

4 long (60 cm) and 8 short (30 cm) wooden cylindrical slats (bamboo sticks)
Dental floss
Hot glue gun and glue sticks
Lightweight windproof fabric or plastic tablecloth
Folded plastic straws
Scissors
Pencil
Ribbons
Roulette
Protractor

If you initially have one long rail, then cut it into 12 parts. From 4 long and 4 short sticks make 2 frames. Use the cut straws to make corner connections. If the straws are too wide, secure them with glue. Cross two rectangles, creating right angles. Use dental floss to tie up the intersections. On all short sticks, find the middle and mark it with a pencil. Put a drop of hot glue in this place, which will make the structure more rigid. From the remaining 8 short sticks, make 2 cruciform designs with clear right angles. Attach with hot glue. Put corner straws on the ends of the crosses. Insert both crosses into the frame, and tie the free end of the straw to the frame. Using scissors, cut the fabric into strips of 20x130 cm. Glue the material to the frame. The middle third of the frame will remain uncovered. Attach the tails to 2 opposite corners of one side. Make them 2 meters or more.

paper bag kite

Such a kite is ideal for kids - 2 and 3 years old. And best of all, almost nothing is needed to make it!

You will need:

Brown paper bag (these are in Auchan at the checkout)
Marker / stickers for decoration
Rope
ice cream stick
Ribbons (optional)

Start with decorating! Decorate both sides of the package. The easiest way is to use markers and stickers. Attach the ribbons to the top of the bag. Cut a small hole in the bottom. Attach/glue the string to the popsicle stick. Pass the end of the rope through the hole in the bottom of the bag, with inside. The popsicle stick should remain inside, and the rope should come out. Wind the end of the rope on a spool and give it to the children in their hands.
Source

mini kite

These kites are made simply and quickly. They are exact copy classical kites, only small ones.

You will need:

Thick paper (A4)
Plastic straws (2 for 1 snake)
Rope or fishing line (meter or more)
Ribbons
Glue stick
Universal glue
Scissors
Pencil
Ruler

Take a sheet, draw a line across long side in the middle, divide it into 3 parts. At the intersection point of the long line and the first point from above, draw a perpendicular line. Connect 4 dots to make a diamond. Cut out another such rhombus from colored paper. Glue them. Take the rope and tie it to a straw at a distance of 2/3 from the top. Cut the second straw into 3 parts (by eye). One third is the future handle of the kite. Add a drop of glue and plant a non-handle rope. Turn the kite over with the white side up, draw a cross on it, connecting the dots from top to bottom and from left to right. Apply glue along the cross and attach the straws. Cut a ribbon of 50-60 centimeters and make a tail out of it. Insert it into the lower straw and secure with glue.

transparent serpent

We found the "recipe" for this snake as the most best kite in the world. Well, let's see if that's the case.

You will need:

1 sheet of parchment paper (36x51cm)
4 thin bamboo sticks: cross 2 x 60 cm, 1 - 48 cm and 1 - 36 cm.
Napkin (2.5 × 12.5 cm)
7 sheets of carbon paper (4x4cm)
2 sheets corrugated paper(5x250 cm)
20 m of nylon rope
Ribbon
Scissors
Centimeter
Pencil
PVA glue
Glue stick
Toothpick
keychain ring

Fold the sheet in half, and then unfold it again. On the other hand, do the same to get the intersection point in the center. Take 1 stick and, bending the paper a little, glue it to the top sheet. Glue another stick in the center vertically. Take 2 more sticks and glue them crosswise (as shown in the picture). Glue all the sticks additionally using paper squares. Cut out squares from colored fabric paper and decorate the kite. Make two holes with a toothpick in the middle, left and right of the vertical axis. Cut a piece of string and attach it to the top left corner. Pull the fishing line to the right corner, pull it like a bow. Tie 2 ropes 50 cm long to the 2 upper corners. Also tie a rope 40 cm long to the center at the puncture points of the toothpick. Tie all 3 ropes in one place with a strong knot. Place all three ropes on the key ring. Attach a reel of fishing line to the ring. Glue 2 tails to the lower left and right corner of the kite. All! Let's fly!

The first thing you will see at any kite festival is giant inflatable kites. Of course they are impressive, and not only for their size. Such snakes are made with high precision from a large number of nylon or polyester panels, most often they are sea creatures, in this image they are most spectacular.

These kites are usually inflated from the front, using air intakes. Which are carefully disguised as appearance animal.

It takes a lot of time to create such kites, and therefore it is not surprising that they can be very expensive, the prices for these creations reach up to a million rubles. Nevertheless, festival organizers are ready to present such kites at their shows, because visitors like them very much. Inflatable kites are an indispensable part of any festival, both in Europe and of course in Asia, where they are mixed with a huge number of modern and traditional kites.

Parafoils

The most common and simple of them are “wind socks”, the so-called sock developing in the wind, turbines and banners. You will be able to see these giant kites at any kite show in Russia, Europe or Asia.

The design of the classic Parafoil consists of several surfaces divided into cells by vertical ribs. The cells have holes, when air flows in, it inflates the structure by exerting pressure on the snake's cells. The largest of these kites can lift heavy objects, cameras, probes, and even people into the air.

The design of Parafoil consists of several surfaces divided into cells by vertical ribs. The cells have holes, when air flows in, it inflates the structure by exerting pressure on the snake's cells.

Sometimes it takes a lot of effort to stabilize this kite in flight. a large number of keels, partitions and other elements, by design this is one of the most complex kites. The reason for the popularity of this type of kite is that they can lift heavy objects to a height much easier than with any other kite of this size.

Delta kite (Delta)

The next most common is of course delta kites. The simplest design of this kite is a simple triangle

With seeming simplicity, for the manufacture of such a kite, one must have a fair amount of experience. But the launch is correct assembled structure even a child can handle it. Therefore, it would be good to buy the first kite of this particular shape. We often complete them with an additional tail, which stabilizes the flight when the wind is not equal. As your skill grows, you can detach the tail for fast and spectacular flight.

(you will find many Delta kites in it)

Rokkaku (Rokakku)

In terms of the flying properties of this kite, it will give a big head start to Delta kites when compared in the same price category, in addition, they are more stable and reliable, this becomes especially noticeable when the wind speed approaches the critical one for kites. Like any decent Delta kite, these beauties do not need tails, because having a tail makes it less maneuverable and smoother in flight.

Rokkaku originally appeared in Japan and were used not only as decoration but also as a weapon.

All types of box kites are constructed from a set of rails and fabric to create a honeycomb structure. The traditional simplest box kite is a construction of 2 closed box-cells.

Most people can imagine what it looks like, these images are presented in many books and are familiar to us. Many modern kites are based on that old design and they just look amazing. Some designers have gone to great lengths to build amazing, complex structures that use the simple box principle in flights….

rotary kite

Enough rare view kites and the only kite that rotates in flight. Therefore, its flight is not similar to the flight of conventional aerial structures.

The flight of a kite is based on the Mangus effect and even a weak and uneven wind is sufficient for the flight of such a design.

One of the most interesting views kites. However, to cope with the flight, you will have to put in some effort.

Kite has not one but usually 2 or 4 control lines. Despite the fact that they usually fly much lower than their counterparts, they are certainly very attractive due to their constant change of direction, not to mention current trend to super-bright color schemes.

Aerobatic kites are another type of stunt kites. They are named so because they were originally designed to train professional kiters and in fact they are not a big copy of them. Due to the fact that, when folded, they have a completely small weight and size, and are also not afraid of damage when falling, they are very popular

You will need drawing paper, dry wooden slats, twine, tape, PVA glue.

First option a simple serpent is the so-called serpent-monk. This is a classic paper design that is very easy and fast to make. Take a sheet of paper and fold it as shown in the attached diagram. Glue the attachment points of the twine with adhesive tape on both sides. Make holes and fasten the twine to get the model shown in the diagram. A sheet of paper can be absolutely any size, but it must be dense. It is advisable not to choose sheets larger than A3. Big sizes require more paper density, and this increases the weight of the kite. As a result, a large kite may be so heavy that it simply will not take off. At the last stage, attach the tail - balancer. The tail should have a length equal to three diagonals of the folded sheet. Making a tail is also very easy. It is necessary to make bows, which can be used as candy wrappers, rewound in the middle with twine. The tail is attached in the same way as a guide rope, i.e. through a hole sealed with tape. The finished kite can be decorated to taste. The snake-monk is ready. In spite of simple design, it flies great and kids will love it.

Second option a simple kite is a frame kite. Make a frame from dry pine slats. Reiki are selected uniform, i.e. thin regular cylinders. The frame can be made in any way shown in the picture below. Reiki are interconnected by winding with twine, which is soaked in PVA. The frame should turn out to be motionless (the movement of the rails relative to each other is unacceptable) and durable. For the wing, use paper or polyethylene film. It is attached to the frame with thread or twine. Moreover, if, due to the large length of the rail, loose sections appear, the length of which exceeds 15 cm, you need to add another attachment point. Keep in mind that the wing must be tight. The finished kite can also be decorated to taste and desire. Don't forget the balancer tail. Its length is three lengths of the longest diagonal of the kite. This design differs from the monk-serpent in that it is equipped with a frame of slats. Therefore, for the manufacture of the main material of the wing, it is better to choose a light, but dense material. Such a material could not be used for a monk, since there the folds of paper are a frame.

Kites will appeal to both children and adults. Flying a kite is a great option for relaxing with a child, which allows you to make a model and then evaluate it in action.

Categories

Popular