How to make a slime out of wallpaper glue. How to make a slime from glue and other improvised materials. Making slime with shampoo and toothpaste

Provide your child with positive emotions by giving him a slime - a toy, the prototype of which is a ghost from the popular film of the end of the last century "Ghostbusters". Like that funny ghost, slim stretches, spreads and does not have a permanent shape.

Although this toy can be bought in any children's store, it is also easy to do it yourself. You decide what density and color to make slime. There are many options, without PVA glue. Let's take a look at a few of these below.

We make slime from detergents

How to make slime from shampoo without It's actually not difficult. To make it, you will need components that can be found in every home:

shampoo;
shower gel or dishwashing liquid.

First, select a container where you mix shampoo and (dishwashing liquid) in equal proportions. It is important that the products do not contain granules, then the slime will turn out to be transparent. After mixing until you get a homogeneous mass, and then put the container with the mixture in the refrigerator.

The very next day, the toy can be handed over to the child. But it is necessary to ensure that he does not pull the slime into his mouth, and after the game he washed his hands. This slime should be stored in the refrigerator in a closed container. Also, it should be thrown away when a lot of debris sticks to it. Because he loses his properties because of him. In addition, the maximum storage period is one month.

flour slime

It's relative safe slime suitable for even small children to play with. Especially if you use natural dyes instead of food. Although in this case, the toy will not turn out so bright.

Now let's look at how to make a slime without PVA glue and tetraborate. As for the previous recipe, you will need materials that any housewife will have at hand:

flour;
hot water;
cold water;
dyes.

How to make a slime without PVA glue? First, take a bowl or any other deep container. Sift two cups of flour into it, so the mass will be homogeneous and easier to cook. Next, add cold water, and then hot, but not boiling water, about a quarter cup of each. Now you need to mix the mixture until a homogeneous consistency, it is important that there are no lumps in it.

Then you should add a few drops of dye: food or natural - it depends on your desire. Stir the sticky mixture again. Then put the container in the refrigerator for several hours. When the slime has completely cooled down, it can be handed to the child for the game.

Lizun from water

How to make a slime out of water without PVA glue? Consider another option for creating a toy. It is incredibly easy to manufacture and is considered the most environmentally friendly. For this you will need:

warm water;
starch (can be corn);
dye.

Making a toy

How to make a slime without PVA glue? In equal proportions, mix warm water and starch until a homogeneous (no lumps) mass is obtained. Add the dye and mix thoroughly again, then form balls from the resulting mass. And now - the slime is ready.

It is important to remember that the water temperature should not be room or cold - then it is more difficult to knead the slime. In addition, do not put too much starch, because of this, the slim can become hard.

plasticine slime

How to make slime without sodium and PVA glue? There are many ways. Now let's get acquainted with the next of them. The advantage of plasticine slim is that it does not blur, retaining the look that you gave it. Use the following materials to make it:

food gelatin;
plasticine.

How to make slime without PVA? First you need a metal bowl. Fill it with cold water. There, dissolve the gelatin, in the proportion that is indicated on its packaging. Then leave it to infuse for an hour. After the specified time, put the bowl on the fire - the liquid should begin to boil. As soon as this happens, it must be removed from the fire.

Next, you need to warm up the plasticine in your hands (about 100 grams). Then you need to pour into plastic container water (50 ml). Then, using a spatula, mix it with plasticine. Now pour the gelatin into the plasticine and knead until you get a homogeneous mass. And the final stage of production - put the mixture in the refrigerator until it cools completely.

We figured out how to make a slime without PVA glue and starch, but it doesn’t always work out right away as it should. Therefore, we will further consider the options and reasons for why and what to do if the slim turned out to be wrong.

Naturally, a lot depends on the quality of the materials used in the manufacture of slime, their proportions are also important. In the recipes, they are indicated with approximately no accuracy, and therefore you have room for experimenting with the consistency of the slime.

What to do if the homogeneity of the slime is broken? In this case, it is worth kneading it well for several minutes. After that, it will become viscous and homogeneous.

If it is too sticky - it stretches for a spoon with threads, and sticks to the fingers so that it simply does not lag behind - it means that the mixture needs to be thinned a little. A small amount or plain water will help you here, depending on the method of making the slime you have chosen.

It may be the other way around, the mass stretches, but it does not stick to the fingers. The reason in this case is the excess fluid in the slime. If this happens, then you should drain the excess powder solution, starch or water. Or you can add some binder, such as flour. Then again knead the resulting mass.

A small conclusion

Now you know how to make slime without PVA. After you have made a toy, you should make sure that your beloved child does not throw a slime at the wall, otherwise they will remain on the wallpaper greasy spots. And from playing with slim on fleecy surfaces, the hairs will stick to the toy.

It is important to know that its shelf life is on average one and a half to two weeks. And between games, the slime should be stored in the refrigerator, but not in freezer. At the same time, do not forget to place it in a container and close it with a lid or in a plastic bag. This is done so that it does not dry out due to contact with open air.

Also, to extend the life of the slim, it can be wiped with alcohol, removing adhering debris. Do not wash it in the sink - you risk washing the slime down the drain. But if he began to lose his properties, just add a little water to it.

And the main thing to remember: always after playing with a slime, it is necessary to wash your hands and those parts of the body with which it came into contact with soap and water. So that the child does not have an allergic reaction.

Method Navigator

1. Method. We make slime from plasticine

In every house in which a child grows up, as a rule, there is a piece of plasticine. We choose plasticine made from environmentally friendly clean materials. So, we will need:

- plasticine - 100 grams;

- a sachet of edible gelatin.

In an enameled bowl, soak gelatin in cold water, stirring thoroughly, for one hour. The amount of water - as indicated on the pack. After an hour, put the bowl on the stove and, stirring constantly, bring the gelatin to complete dissolution. Do not boil! We set aside.
In a plastic, glass or enamel bowl, thoroughly knead the above amount of plasticine with fifty milliliters of water with a spatula or spatula.
Add slightly cooled gelatin to the resulting mass and gently mix with the same spatula or spatula. We strive to ensure that our mass acquires a homogeneous consistency.
We put the bowl with the resulting mass in the refrigerator until it has completely cooled down. Everything, our eco-friendly slime is ready! Enjoy the game!

Interesting: 10 ways to teach your child to brush their teeth

2. Method. We make slime from ordinary flour

To do this, prepare the following components:

- sifted flour (any grade) in the amount of 2 glasses:

- safe dye of any shades - 1 pack;

So, we sift the flour into a convenient bowl in which we will mix our components. Add about a quarter cup of cool water and mix well. We add about the same amount of heated water (approximate temperature 60-70 degrees). Stir for a long time until the mass begins to thicken.
Add the prepared dye and carefully knead the mass again. We put it in the refrigerator for about two hours.
Our environmentally friendly and beautiful slime is ready! You don't have to worry about your child's health.

3. Way. Slime made from baking soda or starch

Another way to make a fairly safe toy. To do this, select the following components:

- starch or soda - approximately 130 grams;

- PVA glue - approximately 130 grams;

- water - approximately 130 grams;

- food coloring:

- hydrogen peroxide 3%.

In any unnecessary plastic, glass or enamel bowl, mix baking soda or starch (depending on what we have chosen), mix thoroughly with a spatula or spatula.
Add the food coloring of our choice, mix again. Add PVA glue and continue to knead.
To make the mass light, as if airy, add a little hydrogen peroxide.
We put the well-mixed mass in the refrigerator for some more time, take it out - and give it to our kids to play!

4. Method. Polyvinyl alcohol slime

We will need the following ingredients:

— polyvinyl alcohol in powder;

- sodium tetraborate - pharmacy;

So, we take an unnecessary container and dissolve the powder of polyvinyl alcohol (follow all the rules), cook on the stove for about forty minutes, stirring thoroughly. The mixture must not burn!
About four teaspoons of sodium tetraborate are diluted in a glass of cool water until a homogeneous consistency. We filter.
Pour the filtered sodium tetraborate solution into a container with pre-brewed polyvinyl alcohol. We mix.
Pour out the dye. We continue to stretch.
We put it in the refrigerator for an hour or two.

Our entertaining toy is ready!

Interesting: Easy way to make a snowflake

5. Method. Construction adhesive slime and shampoo

For the manufacture of children's toys, it is advisable to choose a more natural construction adhesive, for example, "Ecolux". And so, we need:

- any shampoo;

- construction adhesive, for example, "Ecolux", "Titan";

- food coloring.

Step-by-step instruction:

Pour a little shampoo into a pre-prepared dish (plastic, enameled or glass).
Add a few to the shampoo. large quantity(than shampoo) construction adhesive.
Optionally, add the amount of dye that we need to obtain the desired color.
Mix all the ingredients well with a plastic spatula or spatula.
Pour the mixture into plastic bag and carefully continue to knead the mass until even coloring and achieving the required plasticity.
We take out the slime from the package and immediately give it to the children to play with!

It should be noted that for better preservation of the slime, it is necessary to keep it in a cold place and be sure to wash your hands with soap and water after use.

6. Method. Lizun from PVA glue and sodium tetraborate

To create a fun toy, you will need to purchase a few more components, but the result will surpass all expectations. The made slime will be almost impossible to distinguish from what is sold in the store. So, we need the following components:

- PVA glue good quality- approximately 100 grams;

- a solution of sodium tetraborate (it is worth looking for in a pharmacy or utility kiosk);

Step-by-step instruction:

In an unnecessary prepared convenient container (ceramic, plastic or glass), add about a quarter cup of tepid water.
Slowly add PVA glue, mix well with a plastic spatula or other object. Adjust the density of the future slime: if you want to get more elastic, add a large dose of glue.
Pour sodium tetraborate. In the case of using a solution, add one jar. If we have sodium tetraborate powder, we first dilute it with water (you can take one spoonful for half a glass of water). We mix.
Continuing to knead, pour out the dye.
We shift what happened into a regular bag and knead the mixture until we get the desired consistency of our slime.
The created slime cannot be distinguished from the factory one!

7. Method. Lizun from washing powder and PVA glue

You will need the following components:

- liquid detergent;

- PVA glue;

- dye.

Step-by-step instruction:

Pour a quarter cup of prepared glue into a regular semicircular container. Pour the dye, mix well with a spatula.
Add, stirring constantly, about three medium spoons of gel for delicate laundry.
After putting on gloves, we continue to knead the mixture with our hands, achieving the desired density.

Interesting: 10 ways to skip school

Our slime is ready!

Simple Tips:

- when making a slime on your own, you need to know that in order to obtain the required consistency, you can slightly change the dosage by adding a little more of one or another component;

- store slimes in the refrigerator in a bag or a closed container;

Don't forget to make sure the kids wash their hands after playing.

8. Method. Lizun is a magnet

Nothing is impossible! We make our own slime magnet. It is recommended to prepare:

- sodium tetraborate;

- a bag of dye;

— iron oxide;

- PVA glue;

- magnet.

Step-by-step instruction:

Dilute in a liquid, no more than one glass, half a teaspoon of sodium tetraborate powder.

In a pre-prepared container made of plastic or glass, we combine water (half a glass) with PVA glue (about 30 grams). We achieve the desired color with the help of dye. Here we gradually pour in a solution of sodium tetraborate.

Do not forget to constantly stir our mixture with a spatula or spatula until it reaches a homogeneous structure and the density we require. When the mass acquires the required density, stop adding sodium tetraborate solution.

To give the properties of a magnet, we roll out our slime, pour a little iron oxide into the middle. Again, carefully knead our slime, achieving a uniform distribution of the powder over its entire mass.

Lizun magnet is ready!

9. Method. Lizun from clerical glue

To create such funny toy You will need to purchase the following components:

- stationery glue - about 100 grams;

- a solution of sodium tetraborate (it is worth looking in a hardware stall or pharmacy);

- food or other reliable dye (you can use ordinary iodine, brilliant green, etc.).

Step-by-step instruction:

In an unnecessary vessel (enamelled, plastic or glass), prepared in advance, pour glue, pour out the dye and gradually, stirring with a spatula or spatula, add liquid sodium tetraborate. If we have sodium tetraborate powder, we first dilute it with water (about half a glass of water is about no more than one spoonful). We mix.

We adjust the density of the future slime: if we want to create a more elastic one, we add a little more glue.

We put it in a bag, continue to knead, bringing to the desired density.

10. Method. Lizun from the store set

On sale you can find a ready-made kit for creating toys in normal conditions. We just mix in a bowl the included special solution with dye and add the mucus activator. Stir well, let it harden and that's it, our slime is ready!

This applies to all of the above methods:

- when making a slime yourself, remember that in order to obtain the desired consistency, you can slightly change the dosage by adding a little more of one or another component;

- vary the desired colors by adding pearl dyes or sparkles;

- always use gloves;

To prevent drying out, store slimes in the refrigerator in a bag or closed container.

Don't forget to make sure that children wash their hands after playing.

Lizun is one of the favorite children's toys. It has the consistency of soft chewing gum, but does not stick to hands.

Due to the fact that the composition of such a mixture can include the most different ingredients, you will spend only a few minutes to "grow" a slime at home on your own. This is done very simply, and even the children themselves will be happy to participate in the work.

Let's find out some of the most simple ways and life hacks on how to make slime at home.

Glue Slime Recipes

The most common option is the use of glue. Thanks to this component, the slime does not break and retains its shape. What kind of glue can you make a slime with?
Here are the three most popular options:

you can see how to make a slime with clear PVA glue or white glue;
in the work you can use a glue stick;
super-strong glue-moment is also suitable, but it should be handled with extreme care.

First easy way, which we will talk about - slime from sodium tetraborate, PVA glue and water.

You will need one hundred grams of fresh glue, a 4% sodium solution, and a coloring ingredient like gouache or brilliant green.

Pour ¼ cup plain water into a special cooking bowl. It is better to hold it in advance room conditions to get a warm temperature.

Next, pour in the glue until a thick consistency is formed. After the glue, tetraborate (the whole vial) and the coloring component are added. All that remains after adding the ingredients is to wrap the mixture in cellophane and mash. Slime is ready!

Now let's find out how to make Velcro from stationery and silicate glue. This method is not so popular, but it allows you to get an equally high-quality toy.

In addition to glue, use alcohol and a coloring ingredient.

Mix in equal parts alcohol and glue (you can take vodka, but then it should be one and a half times more).

Color the mixture in the desired color, stir, remove from the container - and wash under cold water. After hardening with a slime, you can play.

Do you know how to make a licker out of glue and shampoo? If you decide to use this recipe, choose Titanium glue, as it will allow the slime to retain its strength for a long time.

Add shampoo to the bag - and immediately fill it with glue (it should be one and a half times more). Tie up the bag and shake. This will give you an even mixture that will thicken in just a few minutes.

A detailed video on how to make slime from titanium glue:

Many are interested in how transparent slime without sodium tetraborate. This component at home can be replaced with soda. And if you add dyes, our slime will be colored.

What we need: half a glass of soda, one hundred ml of glue, twice less water, coloring agents, a couple of containers and a wooden stick for kneading.

Let's make it from PVA glue and soda:

make the glue more liquid with water (for example, by mixing 100 and 15 ml);
color the mixture (food coloring will not stain your hands);
stir your workpiece until the paint dissolves;
Mix water and baking soda separately. Pour the finished porridge to the rest of the ingredients;
mix the mass thoroughly, wrap in a film or cellophane - and shake;
if you want the slime to thicken more, keep shaking or stirring. You can try adding more baking soda and glue.

Remember! It is better to store such a slime in a closed container, as it has a short service life, and without proper conditions it will deteriorate even faster.

Don't have PVA glue on hand? Not scary! There is another very simple way to make a lick stick from a glue stick. Watch the video recipe - we can do without PVA glue:

Of course, glue is far from the only component that allows you to get the right consistency for a slime toy. Below you will find many more interesting ways and a video on how to make a slime without sodium tetraborate and PVA glue with your own hands.

On shampoo and gel

Let's talk about a few popular ideas on how to make a lick from shampoo at home.

The first way - the recipe consists of shampoo, water and soda. Mix the components in equal proportions, add paint or brilliant green, traditionally wrap this mixture - and knead in cellophane.

After that, it will be possible to try the slime for quality.

A similar method involves the use of not soda, but salt. Watch the video on how to make a toy from shampoo, water and salt:

As you understand, in such recipes important role plays a component that allows the shampoo to thicken a little.

What to use for such an effect depends only on your imagination. For example, it is easy to guess that you can mix shampoo with flour.

What is needed for such a toy: fifteen gr. shampoo, one hundred gr. flour of any kind, as well as one hundred gr. slightly warm water. We start by mixing the dye and shampoo in a warm liquid.

Later, add the sifted flour - and knead the doughy mass. The desired consistency will be obtained fairly quickly.

Attention! Slime made from shampoo and flour is greasy and can leave stubborn marks on light-colored materials.

Instead of flour, you can use starch. How to make slime from starch and shampoo - see the following video:

Since shampoo and others household products for personal care have a similar consistency, you can easily replace it with something else or even mix several different preparations at once.

Here is one way to make a real slime from shower gel and shampoo: these ingredients will be kneaded in equal proportions.

Advice: do not use a gel with small granular particles that has a scrub effect.

Knead the future anti-stress toy from these products and put it in the cold for about an hour. After that, you can use the mass for its intended purpose. But keep in mind that with increasing temperature, its viscosity will decrease.

After playing, the slime should be sent to the refrigerator.

How to make a slime out of washing gel? To make it last longer, use glue. Mix these ingredients, color the mass if necessary and mix thoroughly. That's all.

It remains only to hold it in the refrigerator for a while.

By the way, it’s easy to make a slime from foam or shaving gel with your own hands. Here is one of those ways:

How to make toothpaste

One of the easiest ways involves using toothpaste.

Take a not very liquid paste (white is better not to take) and pour into a container. Add glue in the same amount there. Knead this mass, adding glue if necessary.

Stir as long as possible: this will affect the density and viscosity. After kneading, the slime will be ready.

Below you can watch a video recipe on how to make a slime from toothpaste with your own hands:

Soap and detergent recipes

Let's start with a description of an anti-stress toy made from detergent and soda. Most often, soda is taken for him, as well as water and Fairy. To receive desired color use gouache.

In a pre-prepared container, add dishwashing detergent - and begin to thicken it, gradually adding soda.

If you find that the slime is too thick, add water to get the opposite effect. When adding ingredients, do not stop stirring the mass.

The licker will be ready even at room temperature, you do not need to send it to the cold.

And here's how to make it from liquid soap and salt:

For an even thicker consistency, you can also use as the main ingredient toothpaste. See for yourself how you can make a cool licker out of soap, paste and water:

On washing powder

Powder is an ingredient that can be found in every apartment. The peculiarity of this recipe is that not any kind of powder is suitable for us.

It is better to use liquid products: dry powder will have to be pre-kneaded with water until the desired consistency is obtained.

It’s easy to figure out how to make a lick yourself out of Persil, Tide and any other washing powder: in addition, we will use glue and dye.

Remember! This procedure must be carried out with gloves so that the powder does not damage the delicate skin of the hands.

Where to begin? Choose a mixing bowl and add a quarter cup of glue to it. Immediately drop a little coloring ingredient and mix it with PVA.

After that, add two large spoons of liquid powder and begin to knead the product until it is sticky and thick. To slightly reduce the density, add more powder.

Now, with gloves, start kneading the finished mass like dough. Remove the formed liquid. You will get a slime that looks like rubber. It must be stored in a closed container in the cold.

Flour method

When we make a toy at home, together with children, it is very important to think about safety. uncomplicated and safe option- recipe with flour.

Attention! To color such a slime, you should choose only high-quality natural ingredients.

Before you make a craft from flour and water, prepare everything you need: about 0.4 kg of flour, as well as separately cold and warm water. Pour the flour into a container, after sifting. Add to it 0.25 cups of low temperature water.

Immediately add the same amount of warm liquid. Let's start mixing.

We add a little dye: a couple of droplets is enough.

Our slime will become sticky, so put it in the cold for four hours before playing. After that, the mass will be viscous, dense enough and pleasant to the touch.

plasticine slime

A fairly simple instruction on how to make a slime yourself from plasticine, gelatin and water will help you quickly prepare a new interesting toy for your child.

Take about one hundred and twenty grams of plasticine, one small package of gelatin and half a glass of water. First, make the gelatine into jelly according to package directions. When the jelly is still warm, pour the hot liquid into another container.

At the same time, boil water, reduce the gas - and start dipping crushed plasticine there. Stir the water during the process.

After the plasticine fragments have melted, add gelatin. Stir the prepared anti-stress mass again. After a couple of days, you can play with it.

Attention! Plasticine slime paints hands, so be careful.

If desired, a fluorescent-type paint can be added to the mixture at the mixing stage. Then the slime will be bright in the dark.

Another way is on the video: from it you will learn how to make a slime from plasticine:

Other recipes

There are many more ways to create such colorful toys: you can learn how to make liquid slime from water and paint, hand cream, eye drops, glycerin, dough, lipstick.

From some ingredients, you can get edible slimes: for example, from watermelons, nutella, mashmellow, chewing gum. And here are some more ideas on how to make slimes at home.

Video on how to make edible slime at home:

How to make a nail polish slime: Mix fresh glue with a few drops of nail polish. After mixing, add a few drops of tetraborate from a pipette.

Stir again. After the mixture begins to acquire a thick consistency, put it out of the container on the polyethylene. Roll up and start kneading from side to side by hand.

In the future, if you lose shape, you can leave the slime in the refrigerator.

And here's how easy it is to make slime from boric acid:

There is a way in which you can easily and simply make your own glass slime without color. It will be obtained from one hundred grams of polyvinyl alcohol and twenty-five grams of 4% tetraborate.

Add borax to the alcohol and start stirring quickly until the mass thickens completely. You don’t have to add additional ingredients: the transparent toy will be ready.

By the way, the slime prepared according to this recipe is non-toxic and is much more suitable for children than similar purchased toys of an incomprehensible composition.

How to care

How to care for a slime at home so that it lasts for a long time? Periodically you can wipe them with alcohol. Do not dip them in water or wash them under a tap.

To maintain the desired consistency, you can use a syringe to add alcohol, water and other components inside.

Children really like this toy, and there is nothing surprising in it: pleasant to the touch, bright slimes coolly creep along the wall, separate and gather.

Such a toy not only charges with positive, but also develops dexterity, motor skills and other skills. and even removes nervous tension so you can join the kids and play together!

Watch a video on how to make an anti-stress slime yourself - three more ways:

Lizun is a toy that came into fashion at the end of the last century. This event was preceded by the premiere of the animated film about ghost hunters. Among the main characters of the cartoon was Lizun - a spreading, stretching and shape-changing creature. In the article I will tell you how to make slime at home without sodium tetraborate and with it.

The consistency of the toy, which was given the name of handgam, resembles jelly, but does not melt in the hands. And although more than a dozen years have passed since its appearance, it is still popular among kids and teenagers.

You can buy a slime in any toy store, but the composition of the factory product includes chemical components, the contact of which with the baby's skin does not delight caring parents. Therefore, many people are interested in technology homemade, because a do-it-yourself slime is safer. This toy also relieves stress, has a positive effect on work. nervous system develops fine motor skills and creativity.

In the article, I will consider popular ways to create a slime from improvised materials. They differ in the duration of execution, composition of ingredients, consistency and quality. finished product, difficulty level.

Clear slime recipe without sodium tetraborate and PVA

Since the toy is intended for children, safety comes first. To create a slime, I advise you to use a recipe based on flour. It is simple and allows you to create handgams in minutes.

COMPONENTS:

Flour.
Hot water.
Cold water.
Food coloring set.

Cooking:

Pour two cups of sifted flour into a small container, add 0.25 cups of cool water and a little hot water but not boiling water.
The resulting mixture is thoroughly mixed until a homogeneous consistency. Make sure there are no lumps.
Add a few drops of food coloring to a homogeneous mass and mix until the composition acquires a uniform color.
Remove the sticky mixture in the refrigerator for 3 hours. Remove the cooled mixture from the refrigerator and knead well with your hands. Slime is ready.

Video recipe

Since working with flour often leads to soiling of clothes, I recommend making slime in an apron. As for me, creating a viscous toy is a great activity for those who do not know what to do when they are bored.

How to make slime with shampoo and water

In any bathroom there are several bottles of shampoo that helps people with hair care. But some craftsmen have found another use for this tool and use it to create a handgam. And indeed, a homemade slime is obtained from shampoo and water in a matter of minutes.

COMPONENTS:

Shampoo - 100 ml.
Water - 100 ml.
Starch - 200 g.

Cooking:

In a small container, combine starch, water and shampoo, mix thoroughly.
Send the resulting mixture to the refrigerator for 12 hours. After the time has elapsed, the toy is ready.

Video experience

Shelf life when stored in a closed container in the refrigerator is one month. If you want the toy to have a more viscous consistency, replace the starch with Titan glue.

The easiest way at home

There are many ways to create a slime. The simplest option is to use baking soda and dishwashing detergents. And since the composition includes household chemicals, look after the child during the game, and then wash your hands.

COMPONENTS:

Soda.
Water.
Dishwashing liquid.
Food coloring.

Cooking:

Pour some dish liquid into a small container. Since there is no specific dosage, add water or household chemicals to thin the mucus.
Add baking soda to dishwashing detergent and stir. If the composition turned out to be thick, dilute with water and mix. To give the desired color, use the appropriate food coloring.

It may not work the first time, but with practice you will learn how to create wonderful slimes from baking soda and dishwashing detergent at home. These skills will come in handy. For example, it will turn out to make a birthday present for a friend and cheer her up a little.

DIY slime made from soap and toothpaste

Do you want to become a slime owner? Make it yourself using toothpaste as the main ingredients and liquid soap. Such a toy will diversify your life and provide an opportunity for the realization of creative potential.

COMPONENTS:

Liquid soap - 20 ml.
Toothpaste - 20 ml.
Flour - 5 teaspoons.

Cooking:

Squeeze toothpaste into a small metal container, add liquid soap and mix until smooth.
Gradually introduce flour into the resulting composition. First, knead the mixture with a spoon, then complete the procedure with your hands.
At the very end, slightly moisten the slime with water and remember a little more with your hands.

As you can see, making a toy popular all over the world from hygiene products is not difficult. It will help in the development and realization of fantasy. It is also a great replacement for purchased plasticine.

Making Slime with Starch and Hydrogen Peroxide

This method is incredibly popular because it does not involve large cash outlays. The result is a solid toy that jumps beautifully. So don't be discouraged if this slime doesn't live up to expectations.

COMPONENTS:

Water - 1 glass.
Starch - 100 g.
PVA glue - 100 g.
Food coloring.
Hydrogen peroxide.

Cooking:

In a small bowl, mix water and starch. The result should be a mixture that resembles jelly in consistency. Add glue and stir.
In the resulting mixture, add a few drops of hydrogen peroxide, a little food coloring and mix. If the mass turned out to be thick, I advise you to add a little water.

Handgum made using this technology is light and airy. This is the merit of hydrogen peroxide. As for the ingredients used, they are really affordable and will help save money.

Lizun from plasticine, water and gelatin

Not every home has PVA glue, starch or sodium tetraborate (borax). But to create a slime, these components are not needed, because it can be made from ordinary plasticine. If there are schoolchildren or preschool children in the house, this viscous mass is sure to be found.

COMPONENTS:

Plasticine - 100 g.
Food gelatin - 15 g.
Water - 250 ml.
Metal container, plastic bowl, stick.

Cooking:

Soak gelatin in cool water. To do this, pour gelatin into a metal container and add 200 ml of water. When the gelatin swells, put the container on the stove and bring to a boil over low heat, then remove.
Take the plasticine in your hand and knead it until it is warm and soft. Put the softened piece of plasticine in a plastic container, add the remaining water. Mix well with a plastic spatula.
Connect the two components. Slightly cooled gelatin, add to a mixture of water and plasticine, stir. Send the resulting mass to the refrigerator for 30 minutes. After the time has elapsed, the toy is ready.

Video experience

A toy made according to this recipe is famous for its enviable durability. Just make sure that the kids do not touch the wallpaper with the slime during the game. It is extremely problematic to remove the traces left by the handgam.

How to make slime with sodium tetraborate and glue

A toy made from sodium tetraborate (Bura) is practically no different from store version, but since the composition includes chemical components, there is no question of safety. Therefore, I advise you to play with such a slime carefully.

COMPONENTS:

Borax - 0.5 teaspoon.
Stationery glue - 30 g.
Yellow and green food coloring.
Water.

Cooking:

Pour a glass into a small bowl warm water, add sodium tetraborate. Mix thoroughly until the powder is completely dissolved.
In the second container, combine half a glass of water, 5 drops of yellow and 2 drops of green dye and glue. Stir the ingredients until a homogeneous mass is obtained.
A solution of sodium tetraborate in a thin stream, stirring, enter into the adhesive mass. As a result, the resulting mass will become viscous and playable.

Keep the slime made according to this recipe in a closed container, as it is afraid fresh air. Do not allow the child to put the toy in his mouth.

Homemade slime from glue stick

Many of us are familiar with the glue stick. AT kindergarten and at school it is used to create collages and appliqués. It also found application in office work. It also makes a good slime. Read the cooking technology below.

COMPONENTS:

Glue stick - 4 pcs.
Bora (sodium tetraborate) - 1 teaspoon.
Flour.
Food coloring.

Cooking:

Take a glue stick, remove the rods and put them in a glass container. Hold them in the microwave or in the oven until a viscous mixture forms. Add a little dye to the mass and mix.
Dilute a teaspoon of boron in a small amount of water. Pour a small amount of the resulting liquid into the glue and mix. Add sodium tetraborate until you get the desired consistency.

You have learned popular ways to make slime at home. Some of them are as simple as possible, others are based on the use of purchased components. It is difficult to say which of the recipes is better, only practice will help determine this.

If your child is tired of playing with his old toys, and he asks for a new one, it is not necessary to immediately run to the store to please the baby. After all, there is great toy, which will keep him occupied and help in the development of motor skills. Slime is such a toy - it is a jelly-like substance that can entertain both you and your child, and most importantly, you can make a slime with your own hands at home from various materials. Ways to make it great amount, and in this article we will tell you 10 ideas on how you can make a slime with your own hands from improvised materials at home.

Lizun without sodium tetraborate with detergent

If you have no time to run to the pharmacy, and the slime needs to be made right now, then this manufacturing option will suit you. This version of the slime appearance and to the touch is as similar as possible to the purchase. But since such a slime contains a detergent in its composition, you need to wash your hands after use.

You will need:

Dishwashing liquid
Mixing container
Hand cream
Dye

Working process:

First, mix dishwashing detergent and baking soda in a ratio of 1:2. Mix thoroughly.
Now add hand cream and mix. The amount of glue must be determined during the mixing process.
And add dye.
When all the ingredients are thoroughly mixed, the mass should turn out to be a little liquid consistency.
Put our not yet quite ready slime in a bag and put it in the refrigerator for 4 hours.
At the end of time, we take out the slime.

Slime from nail polish

Another version of the slime, which is made from ingredients that every housewife has. It turns out bright color and the shade practically does not change during the preparation of the slime. Let's see how to make such a bright and simple slime with your own hands.

You will need:

Colored nail polish
PVA glue
Mixing container
Sodium tetraborate

Working process:

First, we combine two components: glue and nail polish. Mix thoroughly.
Now add water room temperature in the proportion of 1 part glue and 1 part water. We mix.
Now you need to gradually add sodium tetraborate, stirring our mixture. We add not immediately in order to see what consistency we get, softer or harder.
When you mix everything thoroughly, you will see that the slime itself is formed into one mass. All slime is ready!

Lizun from titanium glue

The simplest slime in composition can be made from ordinary titanium glue and water. It turns out plastic, but it looks like a dense viscous mass. It is good to use it for very young children, as its density does not allow it to tear at the slightest load. And now let's see how to make the easiest slime.

You will need:

Glue "Titan"
Paints
Mixing container

Working process:

Pour the glue into the container and mix with the dye.
Now add water to the mass, in a ratio of approximately 1: 1.
Stir the solution until our slime stops sticking to your hands.
Slime is ready!
For good example you can watch the video instruction.

Edible Slime from Nutella

If you want to please your child is not just original toy, then you can make an edible slime. It is made from regular nutella and marshmallows. But it takes a lot of patience to make it. So, let's get started.

You will need:

Pasta Nutella
marshmallow marshmallow
Mixing container

Working process:

Calculate your portion by calculating the composition. For 1 tablespoon of nutella you need 2 marshmallows.
We need to melt marshmallows in the microwave, stirring, you will get a mass similar to shaving cream or foam.
Now mix marshmallow with nutella, mix thoroughly. It will take a long time to interfere, but the result will please you. And most importantly, that such a toy can be eaten.

How to make an edible slime

Another option for an edible slime is to make it from mamba or frutela gummies. Such a slime is not durable, as it freezes when it cools. But it can be eaten and has a pleasant aroma.

You will need:

frutela candy or mamba
Powdered sugar
Water bath

Working process:

Take all the candy out of the packages.
Put in a container and put on water bath. Melt all the sweets while stirring.
When the mixture has cooled slightly, transfer to a container in which powdered sugar was previously poured.
Roll the mass in powder until our slime stops sticking to your hands.
Now you can give your child our edible toy.

Video how to make slime from frutela

Jumping Lizun

If you want to make not just a slime, but at the same time also a jumper. It is very interesting to play with such a slime, and the ingredients that make up the composition are in almost every home. let's get a look Full description with step by step instructions.

You will need:

Silicate glue
Sodium tetraborate
Dye
sequins

Working process:

Pour glue and some dye and glitter into the container.
Next, add sodium tetraborate and mix thoroughly until our mass thickens.
Now you can try out your slime.

Transparent slime

If you didn’t have any dyes at hand, or you just want to make a transparent slime, then this recipe is for you. You can make it very simply and quickly, so let's start doing the slime with our own hands.

You will need:

Silicate glue 125 ml.
Water 250 ml.
Sodium tetraborate

Working process:

Pour glue and water into a bowl and mix thoroughly.
Dissolve sodium tetraborate in 125 ml. water and pour into the mass with glue.
Thoroughly mix the mixture until the mass curls up and forms a slime.
Now you can give the child, or play yourself with this entertaining toy.

Magnetic slime

If you need unusual slime, then you can make it magnetic. To do this, you need ordinary iron shavings and a magnet. So, let's get down to the process of making our slime.

You will need:

PVA glue
Boric acid
iron shavings
Magnet

Working process:

Mix the glue boric acid and iron shavings.
Stir for a long time until the consistency becomes like a slime.
Now you can play with such a slime with a magnet.

Lizun without sodium tetraborate

I want to offer you another option for making slime without the use of sodium tetraborate. This recipe uses only 3 ingredients, and one of them is a regular dye. Let's see how to make your own slime.

Categories

Popular