We make a choice: which stretch ceiling is better matte or glossy. Is a glossy or matte surface better? Tips for Choosing a Monitor Glossy or Matte Whichever

The mirror gloss of the facades attracts the eye with its chic look, and causes concern for every practical housewife: how often will it be necessary to clean the kitchen and polish the furniture. This is where the natural question arises, which kitchen is better glossy or matte.

In this article we will tell you: what is the difference between a glossy and matte finish, what does the color and the sun have to do with it, and, of course, we will give seven good advice to help you make the best choice.

Key Difference: Coating Composition

For every surface, be it plastic, wood or film, you should use the right cleaning products and follow certain rules.

Various cleaning methods

• For lacquered or high gloss films, soft microfiber cloths and glass sprays are suitable. Great for car pollution wet wipes for polishing. Do not use hard towels or brushes, as scratches may remain. You can read more in our article:.
• And in order to pick up what to wash frosted kitchen you need to know what it's made of upper layer. If it is a PVC film, then no special funds it is not required - stains are rubbed off with ordinary soapy water. FROM wooden surfaces a little more complicated, there are already needed special means for care, which, in principle, are easy to find in the free market.

Two important points

The internet is full of conflicting opinions. Each hostess shares her experience: someone claims that it is easier to care for matte, and someone says that it is glossy. But if you carefully read these reviews, you will understand what's going on. Complain, mainly, the owners of dark shades of headsets. And here the coverage does not play a special role.

Spots are not visible on light headsets)

Light furniture, not that it gets dirty less, it's just not very noticeable on it. For example, white furniture, by default, is already clean). And on the dark, just the same, divorces are very clearly visible.

Every speck of dust is visible in sunlight

In the sun, not only dust is visible, but also fingerprints and smudges on furniture. They are especially evident on dark facades.

• If your kitchen is located sunny side, and there is little time for tidying - choose a light matte headset.
• If you really like the dark gloss, be prepared to scrub the facades daily.
• Although, if you arm yourself with microfiber rags and shine products, you can easily cope with any dirt in 10-15 minutes.
• Keep the white glossy kitchen much lighter than dark matte.
• How lighter shade furniture, the less often you have to do general cleaning.
• It is also necessary to wash a matte kitchen, but not as often as a glossy one.
• To avoid leaving ugly stains, wipe dry.

When you buy a laptop or monitor, you are faced with a choice: matte or glossy? Which screen cover is best? What turns into a “mirror” in the light of the Sun, or one on which the colors seem faded?

We hope this article will help you decide.

Glossy vs matte

Where did this opposition come from? After all, both glossy and matte monitors use the same LCD panels.

Nevertheless, manufacturers are releasing glossy and matte monitors, and buyers are in the throes of choice.

Consider the advantages and disadvantages of each of the coatings.

Glossy displays are more "bright". They have more saturated, intense and contrasting color reproduction; especially deep black. This is a plus.

However, they shine in the sun. This is a minus. If you often work for fresh air or your workplace located by a window, glare may interfere with you.

Matte displays have an anti-reflective coating that dampens glare. Therefore, in rooms with bright artificial or natural light, for such monitors it is more comfortable to work.

The disadvantage of matte displays is fading. Colors look a little duller on them.

The pros and cons of glossy and matte monitors are clearly demonstrated by the cover photo. Matte Dell on the left and glossy Apple on the right.

What to choose?

It all depends on your goals.

If you're looking for a desktop monitor and the room isn't overly lit, then you might be fine with glossy finish with brighter colors.

If you are buying a laptop and plan to work outdoors often (on the terrace on a sunny fine day), then look for matte display. Similarly, when buying a monitor for a desktop computer in very good lighting conditions (a table by the window, powerful lamps). But remember: the AR coating on a matte display will not protect you 100% from glare, but it will be slightly less noticeable than on a glossy screen.

Of course, you cannot create ideal conditions for the entire life of the screen (especially when it comes to a laptop). Today your desk is far from the window, and tomorrow you have been transferred to an office bathed in sunlight. Therefore, choosing a glossy or matte display, in any case, you make a compromise.

(The photo shows not only laptops with a matte (left) and glossy (right) finish, but also different models different generations. Please do not make direct comparisons.)

If it were possible to make a monitor, where at the click of a finger matte finish would change to glossy (and vice versa), many would be happy. After all, this would allow "tuning" the monitor to specific conditions. But this is impossible.

Therefore, it is likely that the opposition “glossy vs matte” will continue. After all, how many people, so many opinions.

Modern car tuning very often begins with pasting the "iron horse" with a film. This makes it possible not only distinguish the car from the background of other vehicles, but also to protect the body from small scratches, chips and damage.

Today there is a large number of different types automotive films, with the help of which this happens called restyling. This process quite laborious and requires certain skills. Self pasting can often lead to the fact that the material deteriorates, and the result is not achieved. Many car owners often face the question of how make your car original and give it new colors.

In general, the use of automotive film is a great opportunity give new life your car without harm to its paintwork. In this article, we will look at two types of car films and consider all their advantages and disadvantages. Thus you will be able to do right choice depending on operating conditions vehicle as well as personal needs and preferences.

Characteristics of matte and glossy film

The most popular and sought after are matte and glossy car films. Accordingly, users were divided into adherents of matte and admirers of glossy. But for a novice tuning enthusiast, the question is acute, what to choose?

Both matte and glossy films have presence different colors, structures and the possibility of combination. However, there are also characteristics that distinguish them from each other.

Matte film or, as it is also called matte vinyl, are of different types. Basically, the types differ depending on the material used. This distinguishes between velvet matt film, plastic effect, rubber effect and matt chrome. The latter type is by far the most popular. Now it is worth considering each type separately.

Velvet matte film. It looks like velvet not only visually, but also to the touch. The main producers of this film are companies and HEXIS. The film happens different color, including black, white, red, brown, purple, as well as green and orange. Main The disadvantage of this film is that it is most prone to scratches. and chips that are immediately noticeable. They can be removed with a heat gun or in direct sunlight.

Matte film with plastic effect. This type film is attractive appearance and reliability. Unlike velvet, external influences do not harm the film or almost invisible. The white film is especially relevant, the color does not fade and does not get dirty for years. The main manufacturers of plastic effect films are Mac-Tac and KPMF.

Film with rubber effect. Remotely, this type of rubber resembles crocodile skin and is popular. Just like a velvet film, rubber is sensitive to external influences, despite the fact that sun scratches can self-heal. For the most part, this film is represented by manufacturers such as Oracal and ARLON.

Matt chrome- This is the most popular type of automotive film. And this is not surprising, since matte chrome is considered wear-resistant and resistant to external influences. Moreover, most often the “matte chrome” film is 2 times thicker than any other automotive film. Manufacturers of this film are 3M, Nippon, TeckWrap and ARLON. As for glossy films, they are significantly different from matte ones, as they are more close to the factory parameters.

Using glossy film first adds shine to the car. They are much more susceptible to external influences, but also have the ability to tighten when sunshine. Glossy films are also known for having a wide range of colors, ranging from pink and pearlescent to classic black. By the way, black glossy automotive film is considered the most popular and in demand. Not only does it add depth and brilliance to the color, but it also has a different metallic grain.

What is the difference?

So, the main difference between a glossy film and a matte film is color and gloss. If matte dulls the color of the car, but at the same time updates it and makes it more attractive, matte, in turn, gives the car a shine that not every professional painter can create.

Film selection first depends on its protective properties as well as personal preference. Both matte and glossy film are characterized by the fact that they must protect the car from external influences, while giving it a new life and distinguishing it from the rest.

Advantages and disadvantages of each type

Despite the fact that car wraps are not only designed to make the car beautiful, they also have some drawbacks. Before making a choice in favor of a particular film, it is important to familiarize yourself with both the advantages and with the disadvantages of each. Advantages of glossy film are:

Her can change often, regardless of when the body was last pasted over;

Big choice of colors thanks to which even owners of cars with a rare color will be able to satisfy their needs;

Glossy film can easy to install by yourself, this does not necessarily require the help of a specialist;

They are widely available and it is easy to buy a film even in an online store.

The main disadvantages of the film are its resistance to external influences. If a minor scratch appears on the car, it will undoubtedly be visible on the glossy film. Also, fingerprints remain on the glossy film, which means that the body will have to be constantly wiped.

Concerning benefits matte film , These include:

Matte film wrap will be much cheaper than matte paint. So, you can choose to wrap the car 4 times or paint it once;

Matte film protects paintwork from burnout, and also when pasting a separate part, you can easily get into color;

Matte film is easy to wash in all ways, up to hand washing;

The matte film also polishes well, and scratches and small chips can be pulled out with a hot air gun.

The disadvantages of a matte film include the fact that it is enough difficult to wrap the car yourself, also during the removal of the film, the help of specialists and special devices. One way or another, when choosing a film, first of all, you should pay attention to its protective properties, and then on how the car will look. It is also worth noting that the use of automotive film is economical way hide some body flaws without resorting to painting the car or its individual parts.

The price of gluing and materials in Ukraine

The price of gluing materials in Ukraine depends on many factors. So, you can just buy a film both matte and glossy from 200 UAH per running meter. If we talk about pasting the entire car, first of all, select film type and then choose a manufacturer.

The cost will also be affected by the make, model and class of the car. On average, wrapping the entire vehicle will cost from UAH 6,000, The price for wrapping a luxury car can be UAH 20,000 or UAH 30,000 or more. Some car owners prefer to wrap only one specific part of the body. In this case, the price depends on the detail. On average, partial pasting starts from 300-350 UAH.

For those who have not yet decided on the choice of film, it is worth noting that possible combined pasting car, which includes both matte and glossy automotive films.

Wherever we are, so as not to buy / order, we always need receive a quality product or service . Remember how happy you were when you came home from the store with an excellent phone or computer, when the seller was polite to you and offered the best deal.

In order to get high-quality printed photos, it is necessary not only to pay attention to how the photos were taken (camera, tablet, phone), but also to the choice of paper. Here you need to take into account a large number of different nuances: density, type of coating, compatibility with various types ink and more.

So, what should you pay attention to when choosing photo paper?

First of all, pay attention to specific gravity of paper . Usually the weight for inkjet paper is measured in grams per square meter(g/m2). Specific gravity carrier is only part of the information needed. It is more important to know the thickness of the photo paper, which is not always related to its weight. Paper from different manufacturers with the same weight may have different thickness. That is why for printing in Nizhny Novgorod we choose the most suitable paper thickness. An equally important criterion is paper color . It is worth noting that White paper There are different shades, which when printed gives one or another shade.

In addition to the above features and properties, it is also necessary to pay attention to density parameter : it is he who determines what goals the paper meets. The higher the density, the better the print quality can be. So, for example, with a density of 150 to 300 g / m2, you can get high-resolution photos (from 5760 dpi), and with a density of 130 g / m2, the media is suitable for printing at a resolution of 2880 dpi (brochures, graphics, presentations ). For photo printing, paper with a density of 180 to 230 g / m2 is suitable, for printing products it is better to choose paper with a density of 90 - 180 g / m2.

There are two most common types of photo paper: glossy and matte.

Gloss has a high density and the presence of a special glossy layer that prevents fading and washing of ink from the surface. Through a special polymer coating Glossy paper is ideal for capturing bright colors. rich colors. This paper is best used for printing photos and images with vibrant landscapes and soft undertones.

It is known that matte paper characterized by a lack of gloss and a matte roughness, which is not difficult to determine by touch. Because matte paper has fine pores, ink absorbs more slowly during printing than glossy paper. The main advantage matte paper is its versatility, since it accepts printing with both water-soluble and pigment inks. Moreover, compared to glossy paper, it is more resistant to mechanical damage (fingerprints and scratches). At the same time, it is inferior to glossy paper in terms of its ability to convey subtle color gradations. The images look very contrasty and detailed.

Obviously, it is impossible to determine the absolute leader here. Each type of paper is designed for certain tasks print. For greater clarity, we summarize the criteria for the types of paper in a table.

In the question what paper to print in Nizhny Novgorod to choose "matte or glossy"? It is impossible to give a definite answer. Because the The choice of paper for photographs depends on what you prefer.

Here comes the long-awaited day of buying a new monitor. And the first question in the store puzzles us: “What kind of monitor do you want? Matte or glossy? They begin to list all the advantages and disadvantages of both. As a result, we get lost and go home with nothing. To prevent this from happening, let's first figure out which monitor is better: matte or glossy?

What is their difference?
Both monitors have liquid crystal panels. Glossy and matte monitors differ only in the coating that is applied to the screen. But if both displays use the same LCD panels, where does the contrast between matte and glossy come from?

Features of glossy monitor screens

Features of glossy screens are brighter, more saturated colors, high color rendering, black color is much more pronounced. However, when using glossy monitor reflections and glare become more noticeable. The downside is that when the computer is turned off, all fingerprints are visible. When sunlight hits the screen, the image becomes worse. As a result, it becomes impossible to work on it on a sunny day or on the street. Another disadvantage of such a monitor is that they put a lot of strain on the eyes.

Matte screens differ from glossy screens with a special anti-reflective coating that prevents reflections. With a matte monitor, you can work in any conditions and reduce eye strain. The disadvantage of such a monitor is poor color reproduction, the colors are faded, dull.

Operating conditions for glossy and matte monitors

If you need a monitor for your home computer, then you should think about the lighting in the room. If not too bright, then a glossy monitor with rich colors will do. But if you plan to work on the street or in a room (office) where there is bright lighting, then it is preferable to choose a matte screen. Although it is worth remembering that a matte screen does not protect 100 percent from glare.

In any case, light sources that are in direct line of sight should be hidden. However, in most workplaces, the so-called open light sources are used to illuminate the workplace, which include all kinds of chandeliers, office wall or floor lamps. In this case, the use of gadgets with matte screens gives a significant advantage over glossy ones: they make glare less sharp, as if blurring them.

It is impossible to foresee all the conditions in which you will work. Everything can change the very next day after the purchase. For example, you bought a glossy monitor, and tomorrow you have to work outside or in a place where there is a lot of light. The purchase of anti-reflective film will help solve this problem. However, it is no longer possible to make a glossy monitor out of a matte monitor.

When working with graphic objects, image processing, glossy screens artificially increase contrast. The picture is bright and saturated. However, excessive contrast only visually creates a false sense of beauty. For these purposes, it is better to use a matte monitor.

If you use a computer for watching movies, surfing the Internet, playing games, for video and graphic editors, then a glossy monitor will do. Reflections are not so noticeable. Indeed, in games and films there are bright pictures, here you need color saturation, entertainment. Another advantage of a glossy monitor, for example, in laptops is less battery consumption, since the picture looks more colorful when using a lower backlight.

However, since modern gadgets, in our case a laptop, are mobile and easily transportable, it is easier to deal with excessive solar and household glare - the display screen can be easily moved to a convenient non-solar place and rotated / tilted as you like. For this reason, the glossy screen coating has found wide application and has become especially popular on mobile devices.

Which monitor to choose for working with text, numbers?

At the same time, if you acquire equipment mainly for working with texts and numbers, then the most important criteria Choosing a monitor should be comfortable for the eyes and the ability to use in any environment. In this case, it is recommended to buy a matte monitor. Unlike glossy screen, on the matte monitor images will not be as bright and saturated, but bright sunlight when hit on the monitor will not cause glare and the image will remain well readable.

If, however, when choosing a monitor model, the highest need for transmission is in the first place colors images in a room with secondary lighting, using a laptop / monitor at one workplace without moving it, adjusting the environment to it (lighting, location of the workplace to a light source, etc.), an additional reflective device, then glossy models can be considered. It should also be said that if you have worked with matte screen and switched to glossy, then for some time there will be discomfort in the work.

Before buying, you should carefully weigh the pros and cons of these monitors. In general, it is quite difficult to argue and gossip about the fact which of the screen coverings is preferable, since each user chooses the most acceptable solution for himself. But if you sum up all of the above, then if you work in a room with dim lighting, a monitor with a glossy display will do. And in the case of using the monitor in brighter lighting, you should choose a display with a matte finish.

Let's sum up a little:

Pros of glossy monitors

• brighter, more saturated colors and high color rendering;
• well-defined black color;
• the best when working with graphic objects, image processing, watching videos.

Cons of monitors with a glossy screen

• glare when sunlight hits the screen;
• fingerprints are visible;
• eyes get tired faster.

Pros of matte monitors

• special anti-reflective coating;
• more comfortable to work with texts, numbers;
• generally less responsive in games.

Cons of monitors with a matte finish

• poor color rendition;
• colors are faded, dull;
• graininess is visible in some cheap options.

If you look closely, each type of coverage has its advantages and disadvantages, but in the end it all comes down to how the monitor will be used: whether it's games, movies, or just work.