Glossy or matte screen finish. Matte or glossy kitchen: which is better. Pros of matte monitors

Here comes the long-awaited day of buying a new monitor. And the first question in the store puzzles us: “What kind of monitor do you want? Matte or glossy? They begin to list all the advantages and disadvantages of both. As a result, we get lost and go home with nothing. To prevent this from happening, let's first figure out which monitor is better: matte or glossy?

What is their difference?
Both monitors have liquid crystal panels. Glossy and matte monitors differ only in the coating that is applied to the screen. But if both displays use the same LCD panels, where does the contrast between matte and glossy come from?

Features of glossy monitor screens

The features of glossy screens are brighter, saturated colors, high color rendering, black color is much more pronounced. However, when using glossy monitor reflections and glare become more noticeable. The downside is that when the computer is turned off, all fingerprints are visible. When sunlight hits the screen, the image becomes worse. As a result, it becomes impossible to work on it on a sunny day or on the street. Another disadvantage of such a monitor is that they put a lot of strain on the eyes.

Matte screens differ from glossy screens with a special anti-reflective coating that prevents reflections. With a matte monitor, you can work in any conditions and reduce eye strain. The disadvantage of such a monitor is poor color reproduction, the colors are faded, dull.

Operating conditions for glossy and matte monitors

If you need a monitor for your home computer, then you should think about the lighting in the room. If not too bright, then a glossy monitor with rich colors will do. But if you plan to work on the street or in a room (office) where there is bright lighting, then it is preferable to choose a matte screen. Although it is worth remembering that a matte screen does not protect 100 percent from glare.

In any case, light sources that are in direct line of sight should be hidden. However, in most workplaces, the so-called open light sources are used to illuminate the workplace, which include all kinds of chandeliers, office wall or floor lamps. In this case, the use of gadgets with matte screens gives a significant advantage over glossy ones: they make glare less sharp, as if blurring them.

It is impossible to foresee all the conditions in which you will work. Everything can change the very next day after the purchase. For example, you bought a glossy monitor, and tomorrow you have to work outside or in a place where there is a lot of light. The purchase of anti-reflective film will help solve this problem. However, it is no longer possible to make a glossy monitor out of a matte monitor.

When working with graphic objects, image processing, glossy screens artificially increase contrast. The picture is bright and saturated. However, excessive contrast only visually creates a false sense of beauty. For these purposes, it is better to use a matte monitor.

If you use a computer for watching movies, surfing the Internet, playing games, for video and graphic editors, then a glossy monitor will do. Reflections are not so noticeable. Indeed, in games and films there are bright pictures, here you need color saturation, entertainment. Another advantage of a glossy monitor, for example, in laptops is less battery consumption, since the picture looks more colorful when using a lower backlight.

However, since modern gadgets, in our case a laptop, are mobile and easily transportable, it is easier to deal with excessive solar and household glare - the display screen can be easily moved to a convenient non-solar place and rotated / tilted as you like. For this reason glossy finish screen has been widely used and has become especially popular on mobile devices.

Which monitor to choose for working with text, numbers?

At the same time, if you acquire equipment mainly for working with texts and numbers, then the most important criteria Choosing a monitor should be comfortable for the eyes and the ability to use in any environment. In this case, it is recommended to buy a matte monitor. Unlike glossy screen, on a matte monitor, images will not be as bright and saturated, but bright sunlight when hit on the monitor will not cause glare and the image will remain well readable.

If, however, when choosing a monitor model, the highest need for transmission is in the first place colors images in a room with secondary lighting, using a laptop / monitor at one workplace without moving it, adjusting the environment to it (lighting, location of the workplace to a light source, etc.), an additional reflective device, then glossy models can be considered. It should also be said that if you have worked with matte screen and switched to glossy, then for some time there will be discomfort in the work.

Before buying, you should carefully weigh the pros and cons of these monitors. In general, it is rather difficult to argue and gossip about the fact which of the screen coverings is preferable, since each user chooses the most acceptable solution for himself. But if you sum up all of the above, then if you work in a room with dim lighting, a monitor with a glossy display will do. And in the case of using the monitor in brighter lighting, you should choose a display with a matte finish.

Let's sum up a little:

Pros of glossy monitors

  • brighter, more saturated colors and high color rendering;
  • well-defined black color;
  • the best when working with graphic objects, image processing, watching videos.

Cons of monitors with a glossy screen

  • glare when sunlight hits the screen;
  • fingerprints are visible;
  • eyes get tired faster.

Pros of matte monitors

  • special anti-reflective coating;
  • more comfortable to work with texts, numbers;
  • generally less responsive in games.

Cons of monitors with a matte finish

  • poor color rendition;
  • colors are faded, dull;
  • graininess is visible in some cheap options.

If you look closely, each type of coverage has its advantages and disadvantages, but in the end it all comes down to how the monitor will be used: whether it's games, movies, or just work.

Alexander Dragun, Ph.D., site expert

In the world over time, many things begin to be perceived in a completely different way. So, in ancient times, silk stretched under the ceiling was the privilege of very rich people. Today, the installation of a stretch ceiling in an apartment by the vast majority of the population, judging by the reviews on the forums, is identified with poverty. And it's weird. The glossy surface of the ceiling visually expands the space; stretched film or fabric, unless otherwise stated. Both types of ceilings fit perfectly into any style of decoration, from classic to high-tech. In these conditions, it is important to understand, stretch ceilings - glossy or matte - which is better?

When planning the finishing of the upper part of the apartment, it is important to determine which stretch ceiling choose - matte or glossy? Each of them has its own advantages and disadvantages. Each of them is good in a certain situation. If this were not the case, then either a glossy or matte ceiling would leave the construction market because of its lack of demand.

Glossy stretch ceilings

Tastes could not be discussed. Therefore, many apartment owners do not pay attention to the objective characteristics of each type of ceiling. I like matte - they will mount it. Glossy shines beautifully - it is in all rooms.

However, there are objective criteria that dictate a specific choice for a particular room: difficulties in operation, specifications, degree of implementation design solutions, possibility additional solutions in interior design.

Based on these requirements, consider the pros and cons of glossy ceilings. We immediately note that in a comparative analysis big role the material from which the ceiling sheet is made plays: glossy - only from PVC film, matte - polyester (synthetic fabric), as well as PVC (not very common in practice).

  • high strength - withstands 100 liters of water per 10 m 2 during a flood from above;
  • moisture resistance - can be used in rooms with high humidity;
  • long service life (more than 10 years), during which the material does not lose its technical and aesthetic characteristics;
  • a rich palette - more than 100 colors and shades, as a result of which the interior is given a stylish and very effective look;
  • the ability to visually increase the space due to the reflection of the ceiling surface of 95% of the incident light - the effect of a "mirror" or, as professionals say, "second floor";
  • easy to clean - easy to clean (it is strictly forbidden to use detergents, only a damp cloth - stains from special equipment are very difficult to remove);
  • does not require frequent cleaning- dust and soot do not stick well to a very smooth surface;
  • allows you to implement almost any idea of ​​​​designers - the options for the night sky look especially fantastic.

There is a glossy stretch ceiling and cons:

  • afraid of temperature changes - at a temperature of 0 degrees, it loses elasticity and becomes brittle;
  • has a web width of 1.2 to 5 m, and therefore it is welded with a special apparatus, and a 0.2 mm thick seam, with a close look, can always be seen, especially on light-colored ceilings (specialists have learned how to mask the seam by connecting films of different colors) ;
  • the pattern is not visible - it is blurred and glare, in connection with which only one-color coloring is used;
  • reflects at night street light, which requires tightly drawn curtains in the evening and at night - glare from lanterns and headlights of cars irritates the human psyche;
  • requires careful care - during washing it is easy to cut or pierce, it is subject to repair, but traces will remain visible, even after decorative inserts - only a replacement;
  • thin material - easily damaged - it even got to the point that, to prove the strength of their products, many manufacturers write that their ceilings cannot be pierced, for example, with a champagne cork;
  • heats up and loses its shape powerful lamps- simple light bulbs with a power of more than 60W are not recommended to be used at a distance of up to 20 cm (this statement does not apply to LED lamps).

Matt stretch ceilings

When choosing matte ceilings, the landlord should know that this type of panel has:

  • long service life;
  • solid, without seams, surface - rolls of material have a width of 5 m;
  • ability to tolerate negative temperatures;
  • any kind and type of drawing looks good, from photo printing to 3D drawing - visibility in any light is excellent;
  • natural look - imitates a very expensive color;
  • high density - the risk of damage during care is much less, although here it should be washed carefully;
  • clear color reproduction - it does not glare and is not distorted under various types of lighting;
  • the ability to emphasize all the advantages of shiny furniture;
  • detergent resistance and high temperature, which allows the use of all types of lighting fixtures;
  • good compatibility with moldings of the ceiling space.

Another important dignity matte ceilings - they do not create emotional overstrain due to various glare (a working TV, headlights of passing cars, etc.).

Among the minuses it should be noted:

  • rapid pollution, which is facilitated by the porous structure of polyester;
  • the same porous structure complicates the washing process - it has to without fail use a soft brush and detergent.

Comparison

Based on the above positive and negative properties both types of stretch ceiling, it is difficult to make a choice in favor of one of them. Therefore, we will comparative analysis according to the price factor, the visibility of the seam and the complexity of care.

What is cheaper

A glossy ceiling has a significant price advantage - PVC film is 2-3 times cheaper than fabric, and for some of its types - 7-10 times cheaper, but these are branded materials. The difference will have a significant effect on family budget(2,000 - 3,000 rubles per room). Conclusion: price factor plays a significant role for the population with average incomes.

Where the seams are more noticeable

In practice, this indicator greatly affects the choice of the type of ceiling. Matte ceilings do not have a seam at all - the material does not stick together (therefore, it is produced in a width of 5-6.1 m), for a film it is only 0.2 mm thick. Becomes noticeable in certain lighting and only with light colors of the ceiling. The material is leather, velvet, etc. the seam is almost invisible. For those who want to eliminate the risk of a visible seam, there are two options:

  • make the ceiling multi-level or combined, for example, with drywall;
  • mask the seam with adhesive film of different colors.

Conclusion: it is possible to avoid a visible seam, so neither gloss nor matte canvas has an advantage.

What is easier to wash

A shiny ceiling is less likely to collect dirt, but it is better visible on the gloss and it is more difficult to wash it off - only with a damp cloth without the use of detergents. At a polyester stretch ceiling, dust and soot accumulate faster, but they are practically invisible. At the same time, you can wash the ceiling with the help of "chemistry". It is difficult to give an advantage in this situation to any type of canvas.

What to choose and why

Choose from the above analysis a specific type of stretch ceiling for an apartment - difficult task. It is greatly simplified if you select a ceiling covering for a particular room - minor details begin to come to the fore here.

To the kitchen

Glossy or matte stretch ceiling in the kitchen? Here the issue is solved simply because of an insignificant, at first glance, trifle - PVC film resists water and its vapors well. Therefore, in the kitchen, with its high humidity, there is only a glossy ceiling. Choice of colors, types of lighting, etc. - the task of the designer or the taste of the owners of the apartment. There is one more nuance here - such a ceiling is easier to clean.

To the bedroom

For the bedroom, polyester ceilings are needed, that is, matte. The reason is that the gloss reflects light from the street onto the bed and, consequently, onto the face, which makes it difficult to sleep. The use of heavy curtains partially solves the problem - it removes the light reflected from the street, but blinds the eyes with light from a sconce, chandelier, or other lamp.

If there is a great desire to still make a gloss in the bedroom in order to see everything as in a mirror, it is better to invite yourself to visit the apartment where such a ceiling is mounted and see with your own eyes the effect created by the PVC film.

To the bathroom

Which stretch ceiling in the bathroom - matte or glossy? The answer is obvious - glossy. There are two points here:

  • The bathroom is a small room. A shiny ceiling will expand it visually.
  • High humidity is contraindicated for fabric, so only a glossy ceiling.

To the living room

You can make a ceiling in the living room from any kind of canvas. It all depends on the interior design. There are many solutions here. Where exactly to stop, the owners must decide in accordance with their tastes and preferences.

To the nursery

In the children's room, a glossy ceiling is possible only in the form of the night sky. All other types of it will interfere with sleep, and also scare. Matte ceiling, also with a pattern, - perfect option for this room.

When choosing the type of canvas for a stretch ceiling, it is advisable to follow the advice of professional craftsmen:

  • choose more dense material- the risk of damage during installation and maintenance is reduced;
  • light colors visually make any room taller and wider;
  • in the hallway, a white glossy ceiling looks good, as well as beige and bleached peach colors;
  • in the corridor, the gloss of cold tones creates a negative perception of the room;
  • when constructing a two-level structure, the gloss should be in the center, and the matte canvas should be at the edges;
  • matte ceilings are ideally perceived with spot lighting.

Conclusion

Each type of compared material can be characterized by three keywords:

  • PVC film: economical, beautiful, durable.
  • Fabric (polyester): stylish, expensive, durable.

If after reading the material it is still not clear which is better - matte or glossy ceilings, then the exit to combined combination material. The simultaneous use of glossy and matte elements is becoming a hit of the latest design ideas creating true masterpieces. Such ceilings can be made both in 2 levels, and in the form of a curved shape in one level. The use of two types of materials removes all restrictions on the use various types lamps.

The Matrix is ​​not only the name of a famous movie, but also nothing more than a liquid crystal screen, which is an integral part of any laptop. The price of a matrix, depending on its type, can vary greatly: it all depends on the properties of this matrix, its color reproduction and image quality. In general, although this part of the computer cannot be called the most expensive, the quality and speed of your work will largely depend on it, or rather, on the type that will be installed on your “machine”.

So, before you buy a computer, you must decide whether you want the screen to be matte or glossy. Physically, in essence, matte and glossy surfaces are no different from each other, since they are based on the same liquid crystal panels. It's all about the final surface treatment.

"Gloss" was the brainchild of the Japanese company Toshiba, and at that time the technology had a long and unpronounceable name CASV (Clear Advanced Super View), which can be roughly translated as "clean, improved super-look / look", which partly reflects the essence of the phenomenon. Later, the "gloss" was so named due to the fact that it has a smooth, so-called "polarizing layer". The advantage of "gloss" is that you get a higher contrast image. This is due to the fact that a special film is used, which has successfully begun to replace the glass previously used by the manufacturer. In addition, such matrices - in comparison with matte ones - are very loved due to the fact that the image is seen as more expressive, juicy and expressive. You will almost not feel the "graininess" that is more inherent in matte surfaces. Black colors are very saturated.

However, this type of coating has one very serious disadvantage that must be taken into account. The fact is that the "gloss" has the ability to reflect light, which can piss anyone off. Thus, if the room is very light, then it will be very difficult to see something on such a monitor.

In addition, one should take into account such a "trifle" as a slight contamination of the glossy surface. Even if you do not look closely, you can easily see dust, dirt and greasy traces from fingerprints on such surfaces. Therefore, if you are tired of daily cleaning and dusting, then these qualities may not be in favor of "gloss".

It is interesting to note that some manufacturers (in particular, the notorious Apple company with its LED Cinema Display series) refuse to use any protective anti-reflective agents for processing such surfaces and use an almost untreated lens as the topmost layer of the matrix. This is done mainly for aesthetic purposes, since such a screen does not particularly benefit in color reproduction compared to other types of surfaces.

On the other hand, there is also a “mat”, which can act as an analogue of “gloss”. In fact, it is not particularly different from its “colleague”, however, with regard to the technology of its manufacture, everything is a little different here. The polarizing layer is deliberately “coarse”, as it were, using mechanical, and sometimes chemical, means for this. "Mat" will really be an excellent compensation if you are annoyed by light glare, as well as faces and other objects on the computer screen. It doesn't matter if your room is brightly lit: be it daylight or artificial lighting such as fluorescent lamps, you will still see the information and images on the monitor.

Indeed, matte surfaces have a certain coating to diffuse reflected light, but therein lies the catch. The light is scattered, thereby increasing the amount of blur in the image. To top it all, this is reflected in the reduction of contrast, color intensity and reduces the viewing angle. In other words, what is strong point"gloss" is a weakness for a matte finish.

If we give a more practical comparison as an example, then this is about how to look at the world from the window: everything will seem somewhat muffled, somehow wrong and a little unnatural. This is the "world" through the prism matte surface. After all, you must admit that we will never be able to see all the colors through the glass! We won't even be sure that red is red and not some other color. But if we open the window and look at the world around us without obstacles, we will see bright colors real nature, rich tones of greenery and the bright charm of the sky. And it will already be a real "gloss".

As for cleaning matte surfaces, there are also some difficulties here. Since the surface itself is rough and texturally more complex than the “gloss”, dirt and dust penetrate deeper into it, thereby making it difficult to clean. Thus, sometimes it is very difficult to appreciate the fruits of your labor. However, on rough matte surfaces, dirt, dust and grease are still less noticeable than on the “gloss”.

Of course, sometimes the type of coverage is just a matter of habit and does not carry any utilitarian character. If you just like the way the picture looks on the "mat", then buy it. After all, any advice should always be carefully considered before being applied to yourself and your situation, especially when it comes to expensive equipment that you will work with every day for a long time.

It seems that this war "mat against gloss" will never end. You can spend hours weighing the pros and cons of one or another type of coverage, and not come to a decision that suits everyone and everyone. But if you approach this problem from a utilitarian side, you must first of all answer this question to yourself: what exactly do you use your computer for? What tasks do you solve on it? Everyone will have an individual answer to these questions.

The key to a quality photo is the right paper and decent ink. Choosing the right photo paper is no easy task. Here it is necessary to take into account a large number of various nuances: density, coating type, compatibility with different types of inks and much more.

So, what should you pay attention to when choosing photo paper?

Format

The main part of grades of paper for inkjet printing It has standard size : 32.5x47.5 cm, 27.5x42.5 cm and 21.25x27.5 cm. Some of the manufacturers produce standard sheets of photographic formats: 27.5x35 cm, 20x25 cm and 10x15 cm.

It should not be forgotten that most grades of paper are produced both in sheets and in rolls. Such carriers are convenient to use in roll feed plotters and in cases where necessary custom size, for example, to print panoramic images.

Specific gravity

Usually the weight for inkjet paper is measured in grams per square meter (g/m2). The specific gravity of the carrier is only part of the information needed. It is more important to know the thickness of the photo paper, which is not always related to its weight. Paper from different manufacturers with the same weight may have different thickness.

Color

When printing on white paper, colors are less distorted. But also White color may be different. Dazzling white looks too cold, too beige - dull and dull. Of course, this is a matter of taste. Each shade of photo paper has its admirers and its characteristic color.

What does paper weight affect?

In addition to the above features and properties, it is also necessary to pay attention to density parameter: it is he who determines what goals the paper meets. The higher the density, the better the print quality can be. So, for example, with a density of 150 to 300 g / m2, you can get high-resolution photos (from 5760 dpi), and with a density of 130 g / m2, the media is suitable for printing at a resolution of 2880 dpi (brochures, graphics, presentations ).

For photo printing suitable paper with a density of 180 to 230 g / m2, for printing products it is better to use media with a density of 90 - 180 g/m2.

The higher the density of the photo paper, the more powerful the printer's feed unit must be. This suggests that you should not buy paper from the very high density without making sure the printer can handle it.

Interaction of photo ink and paper

Surface

The surface texture can be different: smooth glossy or bumpy matte. For print on glossy paper best to use water soluble or ultrachrome ink. Pigment from a glossy surface can be easily erased even by hand. For matte paper water-based, sublimation and pigment inks are perfect.

Brightness

If brightness is indicated in the paper specifications, it is usually presented in relative units from 1 to 100. Increased brightness can be caused by the use of various optical brighteners.

It is best if the photo paper is pH neutral (such as pH 7). Acid paper is self-destructive. It is worth giving preference to the variety on which it is written " acid-free". It is desirable to know the exact value of the pH balance. If this information is reported in advertising, this is an excellent indicator of reliability.

Fortitude

Print durability is the result of the interaction between photo paper and ink. So, when printing various types Paper durability of photos can be completely different. AT equally Just like the media, ink also affects the durability of prints.

There are two most common types of photo paper: glossy and matte.

Gloss has a high density and the presence of a special glossy layer that prevents fading and washing of ink from the surface. This is the best paper to use. for photo printing and images with vibrant landscapes and soft undertones. Gloss is great for printing images that require rich colors. Most main disadvantage This type of photo paper is the immunity of pigment ink. Pictures printed on glossy materials glare in strong light.

matte photo paper, in turn, are divided into paper, which has a density of up to 120 and g / m2, and above. For photo printing, it is better to choose media with a higher density. On the matte paper look better highly detailed images With small details. Typically, this type is cheaper than gloss and has increased resistance to fingerprints and scratches.

Obviously, it is impossible to determine the absolute leader here. Each type of paper is designed for certain tasks print. For greater clarity, we summarize the criteria for the types of paper in a table.

* Genuine Epson photo paper selected for price comparison

conclusions

In the question "matte or glossy" it is impossible to give a clear answer. The choice of paper for photographs depends on what exactly are you going to print.

If you need high-quality and detailed photo printing, then it is better to stop at matte photo paper with a density of 180-230 g/m2. Do you need small printed products of a decent level? Then it's better to choose matte media with a density of 90 to 180 g/m2.

Need rich colors and accurate midtones? Then glossy paper- this is what you need. Ideal for photo printing glossy media with a density of 150 - 230 g/m2. For printing printed products, a density of 90 to 150 g/m2 will be sufficient.

We should not forget that high-quality photo printing depends not only on paper and ink, but also on color profiling. INKSYSTEM specialists will help you develop the perfect color combination, which will take into account all the details (printer characteristics, ink type and paper type). On our site you can buy individual color profile. To do this, you need to download a special target, print it and send it to us along with the completed order form.

Good quality printing!

When the repair is at the stage of choosing which stretch ceiling is better matte or glossy, both options should be considered. Be sure to have an idea about the features of a glossy and matte finish, about the care system and the principles of lighting. In addition, it is necessary to take into account the dimensions of the rooms in which stretch ceilings will be installed.

Glossy ceilings are more expensive than matte ceilings because they are more functional than matte ceilings, this is evident in the choice of color, lighting fixtures and ceiling installation. Not every room will look good with a glossy or matte ceiling finish, which is affected by the area of ​​the room, the height of the walls and ceiling, the features of the wall and ceiling coverings, the presence of natural lighting in the room, and other factors.

To do right and useful choice need to consider the options in more detail.

Ceiling Features

  • Characteristics of materials;
  • Ceiling lighting options;
  • Advantages and disadvantages of matte and glossy ceiling.

Matte stretch ceilings: features of this type (video)

Glossy or matte ceilings: which is better to choose

Stretch ceiling has recently become the most convenient, practical and stylish way to finish ceilings in rooms. Stretch ceilings are suitable for any premises, whether it is a house, apartment, club or restaurant. Any room gets very beautiful view if it has a stretch ceiling. Both glossy and matt ceilings are very durable and have a service guarantee of more than 15 years, because the quality of stretch ceilings is very high. This allows for for a long time provide premises good view and save the cost of annual painting, gluing or whitewashing the ceiling.

Choosing a type ceiling covering for the premises, it is necessary to take into account some factors:

  • ceiling height;
  • Availability natural light in the room;
  • Room value.

The glossy ceiling looks good both in small and in large rooms. The space is visually enlarged by mirror effect gloss. White and light color ceiling increases the height of the ceilings of the room, the dark and black color of the stretch glossy ceiling, on the contrary, reduces the visual height of the ceiling.

Gloss is ideal for ceilings in small rooms, expanding its area. A glossy ceiling can only be installed in well-heated rooms, because gloss does not respond well to low temperatures. Besides, glossy canvas does not withstand heating from lamps, so it is impossible to make sufficient ceiling lighting on glossy ceilings. The lamps on the ceiling should be of low heat.

The best option for lighting on a stretch glossy ceiling is spot lighting or a starry sky. Ceiling lighting on a stretch matte ceiling can be lamp, chandelier, spot, with powerful lamps.

The matte stretch ceiling is suitable for decorating both large and small rooms. Any rooms, bedroom, hall, kitchen, bathroom, look good with a stretch matte ceiling. The strength of the matte canvas allows you to make any ceiling lighting, the surface is not afraid low temperatures and heating, so the ceiling can be installed in poorly heated rooms, and the lighting can have powerful lamps.

Glossy or matte ceilings: consumer reviews

Both glossy and matte suspended ceilings have positive reviews about the service life. If the ceiling and lighting are installed correctly, the required temperature is maintained in the room and the ceiling is proper care, guarantee period the exploitation of ceilings is increasing.

More positive feedback from customers about the care of false ceilings, have matte ceilings:

  • The matte surface of the ceiling is better than the glossy one in care and unpretentious to temperature and detergents for processing;
  • Does not require additional care, which cannot be said for glossy surfaces ceiling;
  • It is difficult to wash the gloss from stains that even drops of water leave.

On the large area the ceiling is more noticeable stains of water, traces of rags, residues of detergents. To care for glossy ceilings, it is better to involve specialists from cleaning companies, especially if the ceiling area is large.

There are more positive reviews about the price of the ceiling for matte false ceiling, it is cheaper and inferior glossy ceiling for the price but not for the quality.

Recommendations on how to choose the right color for a stretch ceiling

Stretch ceiling bright color always create contrast in the room, so choose desired color easily. This cannot be said about the shades of the stretch fabric.

It is difficult to choose the color of the stretch ceiling to match the color of the wallpaper:

  • Height makes the ceiling darker by half a tone;
  • Too much light wallpaper merge with a light ceiling or give a strong contrast in combination with a dark ceiling;
  • A stretch fabric with a pattern looks much darker on the ceiling.

So that the color of the ceiling after installation does not come out too saturated, it is necessary to choose a canvas a tone lighter than the intended color. And in order for the shades of the canvas to match the color of the wallpaper or paint on the walls, the color of the wallpaper and paint must be chosen a tone darker than intended.

It will also be useful material on how to choose harmonious combination ceiling and wall colors:

Glossy ceiling in the interior (video)

A stretch ceiling is a rather expensive type of ceiling design, when choosing the color of the paintings, you need to take into account the features of the color and shade, the room, the height of the walls and the ceiling, it is best if professionals who know what colors are revealed on the surface of the ceiling help in this matter.

Which stretch ceiling is better matte or glossy (photo)

Fitting © 2022 Design and interior of apartments