Roof railing with snow guard. Tubular snow guards, walkways, roof ladders, roof railings metal profile Snow guards roof railings roof ladders

main purpose roofing elements security by definition is the preservation of human life. In addition, they facilitate the operation of the roof. Safety equipment includes ladders, railings, support (transitional) bridges. They prevent people from falling off rooftops during installation, repair or maintenance. The safety elements also include snow guards, a variety of devices designed to ensure the safe and quick evacuation of residents from the upper floors in case of emergency.

During the construction process, it is important to constantly remember that after the installation of the coating, there should be unhindered access to the exit, as well as the possibility of free movement on the surface for various purposes: checking and cleaning chimneys, inspecting junction areas, maintaining gutters, antennas, installing new equipment, checking exits ventilation. Without accompanying roofing elements, it is unlikely to complete this entire range of works. After all, even if the roof is flat, there is always a danger of slipping, deforming or damaging roofing. In the recent past, home-made wooden stairs or ladders, fixed, as a rule, at the top of the ridge. But they all had one big disadvantage: limited service life. Plus to it - inconvenience in using and unpresentable appearance.

In modern reality, there are other simple and effective solutions. They will not violate the concept of the project, will not spoil the design, will give the roof a finished look and will be able to save you from many problems. The most advanced technologies at the moment are used in production, powder coating lines are used. And at the implementation stage, products that have an aesthetic appearance are already being offered, and the buyer can easily choose products to match the color of his own roof. Fences, bridges, stairs are able to ensure safety and comfort when servicing roofing, and snow retainers keep snow masses and ice from snow avalanches from the roof in Russian winter conditions.

The number of all components used depends on the geometry and complexity of the roof, on the angles of inclination of the slopes and their dimensions, on climatic features region, as well as the methods of installing security elements. Professionally installed, they help to avoid a lot of trouble and relieve a lot of difficulties during the operation and maintenance of roofs. Safety elements are a very important part of the roof. It is not worth saving on this, since in the end it will be possible to lose much more. And in financially and, it is worth paying special attention to this, in terms of own health and sometimes life itself.

So, what is included in the number of security elements?

• Roof perimeter fencing.
• Transition steps and stairs.
• Wall stairs.
• Stairs on slopes.
• Snow guards.

Separately, it should be noted the measures that ensure safety during the installation of roofing elements - plumb lines, drains, protective aprons, etc. To do this, unhindered exits to the place of work are equipped, fences are installed along the perimeter of the building. Workplaces and approaches to them are equipped with personal and collective protective equipment, which must be manufactured and tested in accordance with existing regulations and prescriptions. Carrying out work on flat roofs where there is no permanent fence, a temporary fence should be installed, the height of which should be at least 120 cm.

In Europe, for several decades, there have been high standards and requirements for safety systems in the construction of roofs. No building can be put into operation without meeting accepted standards roof safety systems.

In Russia, there are no mandatory requirements for roofing safety for private houses, but everyone who builds or has already built their own housing thinks about how to protect themselves and property from snow falling off the roof, and also, over time, thinks about providing access to the roof for its maintenance or repair.

Borge's products meets the highest safety standards and allows you to create a complete roof security system.

What is a roof safety system?

• Facade stairs. For safe access to the roof, provide access to the roof for maintenance or repair.
• Roof stairs. For safe movement up/down pitched roof, provide access to roofing objects.
• Crossing bridges. For safe movement on the roof along the slope.
• Roof railings. To prevent falling from the roof during maintenance and repair.
• Snow guards and snow guards. For protection against avalanche-like descent of snow and ice from sloping blood.
• Roofing accessories. To ensure the normal functioning of the roof.

This is a very convenient and versatile design, which includes and roof fencing and . Thus, you can immediately “kill two birds with one stone” without resorting to two separate roof safety elements, which, in turn, must be mounted independently of each other, which, accordingly, is increasing the cost of installation by almost two times!!!

Fischer is unique in its kind on Russian market There are no products like this one. Our products meet all modern requirements construction, as well as GOST. The design is very versatile, the fence can be mounted on any roof, no need to buy additional additional elements, everything is included. One of the main advantages of the fence is that it is completely collapsible, all parts are supplied separately from each other, which greatly facilitates and reduces the cost of delivery, as well as installation, which becomes a joy for the installer!

Roof railing with snow guard undergoes strict anti-corrosion treatment before painting, as this is perhaps the most important point in the aesthetics of the fence, because if the painting is bad, then the point of supplying such products simply disappears. Our company values ​​the reputation of a supplier that produces quality products and is a reliable partner, which confirms the presence of our customers abroad.

This fence can be mounted on any roof surface - metal tiles, corrugated board, soft roofing, ondulin, seam roofing. attached to the roof with a special bracket, which is specially made to be very universal tool mounts.

The angle of inclination of the fence can be adjusted to any slope of the roof. Snow retainer pipes are oval, which provides high strength these pipes, which can withstand a very large load from snow.

Make your roof safe!

Roof security system: general description

The fastening elements of all safety structures take into account the type and type of roofing (profiled sheet, smooth roof or metal tile) and allow the installation of roof fences quickly and efficiently.

You can conveniently choose products that ensure the safety of the roof. Harmoniously selected collections will make your choice easier. All products intended for roofing are made of hot-dip galvanized or painted steel, have an attractive appearance and a long service life.

Complete security systems consist of the following elements:

• stairs to walls and roof slopes,
• footbridges and service platforms on the roof,
• fencing platforms and bridges,
• snow retainers, elements, etc.

stairs

Ladders and walkways are convenient for roofing operation! You can purchase stairs to the wall and to the end, stairs to the slope, fire escapes. Composing stairs different type, you will get the combination you need. If necessary, the bases of the side and end stairs can be shortened, since the pipe has a large number of attachment points.

Models:

• VPT24 Ladder 2,4m
• VPT30 Ladder 3,0m
• VPT36 Ladder 3,6m
• VPT42 Ladder 4,2m
• Ladder fixings: PT AS1 on the wall
• Ladder fixings: PT AS2 on the wall
• Ladder fixtures: PT AS3 on the roof slope
• Ladder fixings: PT AS4 on fire wall

Snow guards on the roof

Snow guards help prevent snow falls! When the air temperature rises, the snow accumulated on the roof can collapse and scare you a lot. Oval-shaped pipes or profiles included in the snow retention kit keep snow on the roof; they are mounted with strong fasteners that ensure safety. The snow-retaining structure is delivered as a ready-made package containing elements 3 m long; The package also includes mounting accessories and installation instructions for snow guards and roof railings.

Models:

• LE Snow guard, 2000 mm PE
• VLEN Snow guard, 3000 mm
• VLEP Snow guard, 3000 mm

Roof bridges and railings

Roof bridges and railings provide the possibility of safe movement on the roof! It is attached to the roof with adjustable feet, with which you can install elements intended for passages in horizontal position with roof slopes up to 45 degrees. The bridge is delivered as a ready-made package containing elements 3 m long; The package includes everything you need, in particular mounting accessories and installation instructions.

Roof safety elements intended to preserve the life and health of people. The purpose of using the elements is to provide protection for both those working at height and those below. Also, roof safety systems make roof maintenance easier.

Roof security systems

After the installation of the roof is completed, it will periodically be necessary to go to the roof to inspect it. From time to time, pipes should be cleaned and repaired, the roof should be cleared of snow or foliage.

Roof safety systems and elements are additional devices mounted on the roof of buildings. These include: fences, snow retainers, roof ladders and transition bridges, indispensable accessories for the installation, repair and operation of the roof, and also include support (transition) bridges, snow retainers, elements that prevent various objects from falling from roofs.

After the installation of the roof is completed, it will periodically be necessary to go to the roof to inspect it. From time to time, cleaning and repair of pipes, cleaning of the roof from snow or foliage should be carried out. Properly installed roof safety elements will prevent possible difficulties that may occur during the operation of the roof.

When designing and arranging the roof, it is possible to install roof safety elements. These are components that are used to ensure that operation and maintenance are comfortable and safe. They are installed during the installation of roofing material or after the arrangement of the roof. They look more attractive than previously used wooden ladders and ladders, are more comfortable, reliable and durable.

Roof safety elements are used for:

• easy movement on the roof surface during cleaning chimney, repair of coating, inspection of junctions, cleaning of drains, etc.;
• protection of the roofing from mechanical damage that may occur when walking on the roof.

Such products are selected to match the roofing material. Due to this, they do not attract attention to themselves, they look neat and aesthetically pleasing. The Euromet company offers to buy roof safety elements at favorable prices. We supply such accessories for roofs with different coating(smooth and profiled, for metal tiles or soft roof). In the catalog - big choice designs, designs and colors.

Snow guards

Install along the perimeter of the roof along the overhangs. Mounting locations are chosen so that they are above bearing walls. In these areas, a reinforced crate is performed or a continuous flooring is equipped. The type, size, number of tubular snow retainers is determined by the area of ​​​​the roof, the angle of inclination and the length of the slope. For the roofs of private houses, one row of snow retainers is usually enough along roof overhangs. This row is set at a distance of 35 cm from the edge of the roof. With a slope length of more than 8 m, a second row of snow retainers is additionally installed. They are also installed on skylights if they are on the roof.

Such products are used to keep snow on the roof, to prevent it from falling onto the blind area, flower beds, lawns in large volumes. Some types of snow retainers allow snow to pass down in small, safe portions, which reduces the snow load on the roof. Tubular snow retainers consist of vertical supports and horizontal tubes attached to them. Euromet specialists recommend placing supports at a distance of about 1 m from each other.

Instead of support brackets, in some cases, strips are used, which are mounted using reinforcing strips on the crate. For this, elongated ridge screws are used. In this case, standard roofing screws are used to fasten the tubular part.

Snow guards can be lattice (steel grating is installed instead of horizontal tubes) or made in the form of separate elements that are placed on the roof with a given pitch.

Roof railings

The roof railing is formed by a vertical steel grating mounted on supports. Supports are attached to solid crate ridge screws through the deflection of the metal tile wave. When fastening with self-tapping screws, EPDM gaskets are additionally used to protect the hole in the metal tile from contact with moisture.

Supports are installed along the roof overhangs in 90 cm increments. During installation, they are adjusted according to the slope of the slope to ensure vertical position. After adjusting and fixing the supports, the gratings are installed. When hanging use bolted connections. If the mounting holes on the supports are not made, they are drilled in the upper and lower parts. In the upper part, M10x35 bolts are used to fasten the grille, in the lower part - M8x55, the diameters of the mounting holes are 11 and 9 mm, respectively. The open end holes are closed with plugs (supplied in the kit), the sections connecting the sections to each other and to the supports are treated with sealant.

Properly installed increases the safety of movement on the roof, protects people and objects from falling.

transition bridges

used to move on the roof. Their design increases the safety of movement: feet do not slip on them, every step is safe. Additionally, the bridges protect the coating from mechanical damage: you do not walk on the metal tile and do not scratch it.

Crossing bridges have the following advantages:

• you can buy the required number of sections and docking elements in order to install a bridge of the desired length and configuration on the roof;
• convenient movement across the slope for maintenance of junctions, chimneys, exits, etc.;
• water and snow do not accumulate on the surface of the bridge - due to the lattice structure, the bridge remains clean and dry;
• you can adjust the angle of inclination of the structure individually, depending on the angle of inclination of the slope on a particular section of the roof.

The bridges are installed on a reinforced crate, fastened with ridge screws, bolted connections are used during assembly. According to Euromet employees, they look neat, serve for a long time and increase the safety of operation and maintenance of the roof.

Roof stairs

- a design that is used to climb the slope to the ridge, hatch, pipe. It is installed together with a wall ladder, it can have different lengths and designs.

Mounting order

When arranging the roof at the installation sites of the support brackets of the roof ladder, a reinforced or continuous crate is made. When assembling the stairs, the support brackets are connected to the sections. It is best to determine the required length of the ladder in advance and cut the last section to length, if required, before installation begins. For cutting use a hacksaw for metal.

When installing the support brackets on the roofing, use bolts-screws. The areas of joints and junctions of the brackets to the metal tile are protected with sealant. In the upper part, with the help of a pair of brackets, the ladder is fixed on a ridge beam.

The ladder on the wall is mounted together with the roof. At the first stage, the structure is assembled. The handrails are attached to the racks of the roof ladder with brackets.

Wall brackets are put on racks and fastened with clamps. Pairs of brackets are installed under the lower and upper steps of each of the sections.

If required, handrails, brackets, sections are cut with a hacksaw to the required dimensions. After assembling the structure, the brackets are fixed to the wall with anchors. At the top of the stairs, hanging brackets are used, which are attached to the rafters or hemming board. The connections are not tightened tightly before installation: all fasteners and joints are finally fixed after installing the brackets and leveling the structure.