Today, there are many ways to artificial snow at home.
1. Making snow from soap

Grate white soap (or candle white color) on a grater and mix with baby powder.

2. Making snow from Styrofoam

On a grater, you need to grate the foam and sprinkle it with branches that must first be smeared with glue. Branches for this can be taken from any tree, and if you add a little glitter to the foam, the snow on the branches will sparkle beautifully. This method can be used to decorate sprawling and large branches. Snow-covered branches can be decorated with anything, such as a garland, bows, balls, etc.
3. Snow from diapers

Having taken a sufficient number of diapers, you will have to carefully cut them with scissors and pour the contents - the same sodium polyacrylate - into a container prepared in advance. For these purposes, you can take a bucket or basin, or get by with a smaller container - everything will depend on how much snow you want to end up with. After the contents of the diapers are poured into the container, you should pour some water into it, mix it, and wait some time until the sodium polyacrylate absorbs the liquid. If the "snow" looks dry, add a little more water and mix again. And so on until the contents of the container look like real snow. To make artificial snow look like real snow, not only externally, but also to the touch, just place it in the refrigerator. If the capacity is too large - in the cold. The main thing is that the temperature should not be below zero - in this case, the water will freeze, and our artificial snow will simply turn into ice.
4. Snow from packaging bags (comparison with real snow in the photo)

You will need:
- foamed polyethylene; (material that is used as packaging material for breakable items, as well as inserted into the bow new shoes, to save the shape.)
- fine grater
- scissors.

It is advisable to work with gloves. With a little effort, we get the following result. But if this result does not suit you, you can experiment further. Take scissors and finely cut our snow flakes.
5. Hoarfrost from salt

We will imitate frost with the help of salt crystals. Get real chemical experience, and for the baby - magical transformation. Salt is better to take coarse grinding, then the crystals will be more effective. Salt crystals can be made colored by tinting the saline solution with ink, green paint, or food coloring.
So. Pour salt into boiling water, let it dissolve completely (proportion: 1 kg of salt per 1.5-2 liters of water). We lower clean and dry branches into the hot saline solution (this is important). We leave to cool. Then carefully remove the branches and let dry. Frost is ready. The method is convenient for small twigs, dried herbs, dill umbrellas, etc. You can grow salt crystals on Christmas decorations. "Frost-covered" branches look good not only solo, as an independent winter bouquet, but also in New Year's compositions from coniferous branches.

6. Snow from shaving foam

You need to mix about a pack baking soda with about a can of shaving foam. By kneading a mass of these ingredients, you will get a cool, snow-like substance, from which snowballs and snows are really molded.

7. Shiny snow

It turns out cold, fluffy and very soft.
Ingredients:
two boxes cornstarch/ corn flour
Shaving cream
Mint extract (optional)
Glitter or mica

8. Snow clay

Ingredients:
2 cups baking soda
1 cup cornstarch
1 and 1/2 cups cold water
A few drops of mint extract
sequins

9. Snow "lizun"

Ingredients:
2 cups of PVA glue
1.5 cups hot water
sequins
Optional: a few drops of mint extract to give the slime a frosty flavor
Mix in a small bowl
In a second bowl, mix
3/4 teaspoon borax
1.3 cups hot water
Combine the contents of both bowls and mix with your hands for several minutes until the mass begins to stretch.

10. Snow paint

Ingredients:
Shaving cream
PVA school glue
Peppermint extract
Glitter

11. "Silk" snow

Ingredients:
Frozen white soap bars (any brand)
cheese grater
sequins
Peppermint extract
Method of preparation - send the soap overnight in the freezer. In the morning, you can take it out one by one (Crystal used 6 bars) and grate it. Fluffy snow will be obtained, in which sparkles and mint extract can be added. It is perfectly sculpted, and you can make a snowman or any other figurine.

12. Snow dough

Ingredients:
Corn starch (freeze overnight to keep snow dough cold)
Lotion (refrigerate overnight to keep the snow dough cold)
sequins

13. "Liquid" snow.

Ingredients:
Frozen cornstarch
Ice water
Peppermint extract
sequins
In the starch that you got from the freezer, you need to add ice water until the desired consistency is obtained. It is recommended to add little by little so that the “snow” does not turn out to be too liquid.
Also, if you have never done non-newtonian fluids you might be in for a surprise. Because with active interaction, the mass becomes harder and more viscous, and at rest it spreads.

14.Snow out polymer clay
Ingredients:
remnants of dried polymer clay (plastic).
Needlewomen often keep the remains of polymer clay, which is a pity to throw away. It is very convenient to grind it with your hands, and then with a coffee grinder. It turns out a light and multi-colored (when using colored clay) snowball, which can be used to decorate postcards and other hand-made products.

15. Polyethylene foam snow
Ingredients:
foamed polyethylene (used as packaging material for technology, glass; shoe inserts) or foam;
small grater.
We work with gloves. We grind polyethylene or polystyrene on a grater and ... Voila! Fluffy flakes all over your house!!! If you add sparkles, then the snow will also sparkle. You can powder anything with this snow if you first lubricate the surface with liquid (diluted with water) PVA glue.

16. Artificial snow for the "snowball"
Ingredients:
Paraffin candle
It must be grated on a fine grater. This "snow" is great for making toys "a la snowball", when glycerin and artificial snow flakes are added to the water. The container is hermetically sealed and when shaken, the snow falls smoothly to the bottom.
You can really go the simpler way - and add ordinary sparkles to such a ball. It will turn out no less effective.

17. PVA and flock snow
Flock is a very finely chopped pile. And if you are lucky enough to find a package of white flock on sale - rejoice. After all, now you will get “snow” for any craft in a matter of minutes. It is enough to generously grease the surface with glue and sprinkle flock on top (you can use a strainer).

18. Snow from PVA and starch
Ingredients:
2 tablespoons starch
2 tablespoons PVA
2 tablespoons silver paint
Thoroughly mix (grind) the ingredients.
Such snow is suitable when it is necessary to decorate the surface of the product with a bulky white mass.

19. Mass imitating snow
Ingredients:
small quartz sand or semolina or foam chips
white acrylic
thick PVA
sequins
1. Pour a small amount of your chosen material into a bowl. Approximately 1 faceted glass.
2. In this bulk material, we begin to gradually add white acrylic paint. From experience it is better to buy it in hardware store for facade works. We add to such a state that our loose particles stick together, but do not float in the liquid.
3. Then add PVA, preferably thick. We also add quite a bit so that the mixture is elastic and viscous.
4. Well, some silver sequins. We mix everything and ... everything !!!

Recipes for edible snow.
1. Sugar snow
Ingredients:
sugar.
Dip the rim of the glass (glass) in water or syrup, and then in sugar.

2. "Snow-covered" plants
Ingredients:
gum arabic;
egg white.
With the help of these components, plants can be candied (non-poisonous and non-bitter). good taste have pear, apple, cherry, rose, violet, primrose, lemon, begonia, chrysanthemum, gladiolus flowers, pansies. Candied leaves of mint, lemon balm, geranium are obtained beautiful and very fragrant. Dissolve 12 g of gum arabic with constant stirring in ¼ cup of hot water (in a water bath). Cool the solution. cook sugar syrup: 100g sugar per ¼ cup water. Also cool. On plants, apply with a brush first a solution of gum arabic, and then sugar syrup. Sprinkle with fine granulated sugar (but not powdered). Dry on parchment paper or tracing paper. Such "snowy" beauty will not deteriorate for several months. These flowers can decorate a birthday cake or your favorite small sweet pastries.

3. "Snow-covered" plants - option 2
Ingredients:
egg white;
sugar.
Beat egg white and sugar until foamy. Apply with a brush to the petals of the plant and sprinkle with powdered sugar. Put the plants prepared in this way on parchment and put in the oven on a small fire. Two hours later you can admire the beauty!

4. salty "snow" for meat
Ingredients:
a pinch of salt;
egg white.
Beat the egg white and a pinch of salt in a steep foam with a mixer. Lay this impromptu snow on the meat and send it to the oven! Miracles: a chicken in a snowdrift!
Taken from open internet sources. All rights belong to the authors.

Children love snow. From it you can sculpt snowballs, make snowmen and build fortresses. Snow is an invariable attribute of the Christmas tree and the New Year. Unfortunately, the magic of snow does not last long, and at home, in warmth, it quickly melts. Artificial snow comes to the rescue, made with my own hands from those materials that can be found in every home. He is not afraid of heat, and with this material you can decorate a Christmas tree, complete crafts, or even make a snowman right in the room.

Styrofoam

Most easy way(and one of the most common) - making snow from foam. Even a child can handle it! A piece of styrofoam (you can find it in the box from household appliances) just breaks into small grains.

Polyethylene

Foam analogue - polyethylene film, which is also used in product packaging. Making snow from it is simple: you need to roll the film into a tight tube, and then grate it on a fine grater.

Received air mass mixed with glitter and potato starch (3-5 sachets) and water. When the composition becomes homogeneous, it must be dried on a battery.

Soap

White soap is used to make artificial snow. It is necessary to grate it on a fine or medium grater, then mix with baby powder. Snow is ready! It looks just like the real thing and smells good too.

Advice

Instead of a bar of soap, you can use a white candle.

Shaving foam and soda

A great homemade snow obtained from shaving foam and soda. They need to be mixed in a ratio of 1.5: 1 (one and a half packs of soda per foam can). The ingredients are gradually and simultaneously poured into a deep container, thoroughly mixed. You can add glitter. The mixture should cool in the refrigerator for 5-7 minutes, after which it is ready for use. You can make real snowballs out of foam and soda snow.

Eggshell

Do not rush to throw away the white egg shell after cooking. After removing the films, you need to place the shells in a tight bag, put on a hard surface and grind with a rolling pin. The resulting powder can be mixed with glitter for beauty.

Diapers

Unbelievable but true: snow can be made from baby diapers. Each contains a unique material inside: sodium polyacrylate, the main property of which is to absorb liquid 200 and even 300 times more own weight. It is from sodium polyacrylate that artificial snow is produced, which can be bought at the store.

To create snow, you need to cut the diapers with scissors, remove the contents, pour into a container and slowly pour water into it, stirring the contents. The sodium polyacrylate should absorb the liquid.

Ready artificial snow should be similar to the real one both externally and to the touch. After mixing, the mass will be placed in the refrigerator for a while, and then create and enjoy the process.

Toilet paper

Toilet paper, paper towels or tissues (all must be white) are torn into small pieces. The grated soap is placed in a glass or ceramic container, followed by a layer of paper.

The bowl is placed in the microwave for 30-40 seconds. paper fibers after heat treatment become fluffy, rise, and the soap softens.

A little water is added to the mass, everything is thoroughly mixed and left in the refrigerator for 3 minutes. After that, the snow needs to be crushed again. From the resulting snow, you can sculpt whatever your heart desires.

Conclusion:

Make artificial snow available materials everyone can. He will become great decoration, craft material and a fun toy for a child.

Of course, you can bring real snow into the house, but there is one significant problem, it will quickly melt, here factory production came to the rescue, which gave the world dry artificial snow. It is customary to decorate spruce branches, window sills, shelves and other objects in the house with such snow, it’s a pity that snowballs cannot be sculpted from it. But this problem is easily solved, below we will talk about several ways to make snow on our own, and we will tell not only about creating snow that can be sculpted, but also about methods for obtaining dry snow.

How to make artificial snow with your own hands - the best examples

1. From starch and shaving foam

Pour corn starch into a deep bowl (you can also use potato starch), squeeze shaving foam from the bottle here, mix the mass thoroughly with your hands. The snow is ready, you can sculpt snowmen or snowballs.

2. From diaper filler

Another great method for creating artificial snow, we take a baby diaper (in some pharmacies they are sold by the piece), unzip the bottom, take out soft filler put it in a deep bowl. Pour a little water into the container with the filler, wait for the mass to swell, mix it thoroughly with your hands. The result is a very realistic sleet.

3. Foam

We take the foam (look in the boxes from under the equipment), scrape it off with a fork small balls, which will move away from the foam in the process of pressing with a fork. A scattering of such balls is more like small hail, but if such balls are glued to dry twigs, then a feeling of “homemade” snow will be created.

4. Eggshell

From eggshell we separate the inner films, then put all the shells in a transparent tight bag, and grind them with a rolling pin to the desired state.

5. From soap and paper towels

We take a roll of snow-white toilet paper or paper towels. We tear the paper into small flakes, put grated soap on the bottom of the plate and pour pieces of paper. Place the plate in the microwave for one minute. Look at what is happening inside the oven, the paper should rise and fluff. The soap will become soft and pliable, take out a plate, pour a little water here, mix the composition thoroughly. From such snow you can sculpt snowmen or snowballs.

6. Polyethylene foam

An elementary way to create dry snow, we take a piece of foamed polyethylene (look in boxes with equipment) and rub it on a grater.

7. From soap and starch

We rub on a grater white soap, pour it into a deep plate, add potato starch here, and pour in hot boiled water, beat the whole mixture into foam with a mixer. Apply the mixture to the surface of the prepared foam ball. Let the product dry. This snow looks great. spruce branches.

8. Snow made from baking soda and shaving foam

elementary method creating a very spectacular snow, squeeze shaving foam into a deep bowl, pour soda here, constantly stirring. Such snow will not only smell good, but it will also be cool to the touch.

Sodium Polyacrylate Artificial Snow

5 different ways to make snow (video)

We offer another entertaining way to spend time with your child - to make artificial snow. Such snow is useful for home decoration, postcards, for winter crafts with kids. All these 7 ways are very simple and low-cost. You can find all the ingredients at home.

shining snow

It will turn out cold, soft and fluffy. Just mix two boxes of cornstarch or cornmeal, shaving cream and glitter.

"Silk" snow

Ingredients:

• frozen white soap bars;
• cheese grater;
• sequins.

Leave the soap overnight in the freezer. Take out in the morning and grate. Fluffy snow will be obtained, in which sparkles and mint extract can be added. It is perfectly sculpted, and you can make a snowman or any other figurine.

Shaving foam snow

Ingredients:

• 1 can of shaving foam;
• 1.5 packs of soda;
• glitter (optional)

Squeeze the contents of the can of foam into the container and gradually add soda. You will get a very pleasant mass of snow, from which you can sculpt figures.

Polyethylene foam snow

Ingredients:

• foamed polyethylene (used as packaging material for equipment, glass; shoe inserts) or foam;
• small grater.

We work with gloves. We grind polyethylene or polystyrene on a grater and ... voila! Fluffy flakes all over your house!!! If you add sparkles, then the snow will also sparkle. You can powder anything with this snow if you first lubricate the surface with liquid (diluted with water) PVA glue.

Snow from a baby diaper

Cut open the diaper and remove the sodium polyacrylate from it, then tear it into small pieces. Put the resulting mass in a container and fill with water. Pour in gradually, in small portions, until the pieces of polyacrylate begin to resemble snow. Just do not overdo it, otherwise it will turn out too wet. To make the snow look more realistic, put the container in the refrigerator, but not in the freezer.

Frost from salt

Ingredients:

• salt (preferably coarsely ground);
• water.

We prepare a concentrated salt solution. To do this, fill the pan with a small amount of water and put on low heat. Add salt until it no longer dissolves. We dip the branches of spruce, pine or any other plant in a hot solution and leave for a while. The process of crystal formation is much faster in warm water! We let the water drain and leave the plants to dry for 4-5 hours. Sparkling frost is guaranteed! If you add brilliant green, food coloring or ink to the salt solution, then the frost will turn out to be colored!

Snow from PVA and starch

Ingredients:

• 2 tablespoons of starch;
• 2 tablespoons PVA;
• 2 tablespoons silver paint

Thoroughly mix (grind) the ingredients. Such snow is suitable when it is necessary to decorate the surface of the product with a bulky white mass.

According to the site more-idey.ru

Artificial snow can help you have fun with your baby and also come in handy for winter crafts. How to make it so that it is quite budgetary and simple? We have collected 20 artificial snow recipes for you - try it and share your impressions. Not all of them will completely imitate snow - fluffy, soft, cold and smelling of freshness. There is also "snow" paint for drawing and "snow" slime, and "snow" plasticine, and other interesting substances. But all of them are directly related to the snow and will definitely appeal to children. And if you need "adult" options for use in needlework, then immediately go to.

For children, the most curious options are those proposed by Crystal Andrewood

How to make artificial snow at home

1. Shining snow

It turns out cold, fluffy and very soft.

Ingredients:

Two boxes of corn starch / corn flour

Shaving cream

Mint extract (optional)

2. Snow clay

Ingredients:

2 cups baking soda

1 cup cornstarch

1 and 1/2 cups cold water

A few drops of mint extract

3. Snow slime

Ingredients:

2 cups of PVA glue

1.5 cups hot water

Optional: a few drops of mint extract to give the slime a frosty flavor

Mix in a small bowl

In a second bowl, mix

3/4 teaspoon borax

1.3 cups hot water
Combine the contents of both bowls and mix with your hands for several minutes until the mass begins to stretch.

4. Snow paint

Ingredients:

Shaving cream

PVA school glue

Peppermint extract

5. "Silk" snow

Ingredients:

Frozen white soap bars (any brand)

cheese grater

Peppermint extract

Method of preparation - send the soap overnight in the freezer. In the morning, you can take it out one by one (Crystal used 6 bars) and grate it. Fluffy snow will be obtained, in which sparkles and mint extract can be added. It is perfectly sculpted, and you can make a snowman or any other figurine.

6. Snow dough

Ingredients:

Corn starch (freeze overnight to keep snow dough cold)

Lotion (refrigerate overnight to keep the snow dough cold)

7. "Liquid" snow.

Ingredients:

Frozen cornstarch

Ice water

Peppermint extract

In the starch that you got from the freezer, you need to add ice water until the desired consistency is obtained. It is recommended to add little by little so that the “snow” does not turn out to be too liquid.

Also, if you've never made non-Newtonian fluids before, you might be in for a surprise. Because with active interaction, the mass becomes harder and more viscous, and at rest it spreads.

8. Snow from shaving foam

Ingredients:

1 can of shaving foam

1.5 packs of soda

glitter (optional)

Squeeze the contents of the can of foam into the bowl and gradually add soda. You will get a very pleasant mass of snow, from which you can sculpt figures.

Now let's move on to the adult part.

Artificial Snow Recipes

9. Polyethylene foam snow

Ingredients:
foamed polyethylene (used as packaging material for equipment, glass; shoe inserts) or foam;
small grater.
We work with gloves. We grind polyethylene or polystyrene on a grater and ... Voila! Fluffy flakes all over your house!!! If you add sparkles, then the snow will also sparkle. You can powder anything with this snow if you first lubricate the surface with liquid (diluted with water) PVA glue.

10. Polymer clay snow

Ingredients:
remnants of dried polymer clay (plastic).
Needlewomen often keep the remains of polymer clay, which is a pity to throw away. It is very convenient to grind it with your hands, and then with a coffee grinder. It turns out a light and multi-colored (when using colored clay) snowball, which can be used to decorate postcards and other hand-made products.

11. Snow from a baby diaper

Ingredients:
baby diaper.
To get snow, you need:
1. Cut open the diaper and remove the sodium polyacrylate from it, and then tear it into small pieces.
2. Put the resulting mass into a container and fill it with water. Pour in gradually, in small portions, until the pieces of polyacrylate begin to resemble snow. Just do not overdo it, otherwise it will turn out too wet;
3. To make the snow look more realistic, put the container in the refrigerator, but not in the freezer.

12. Frost from salt

Ingredients:
salt (preferably coarsely ground);
water.
We prepare a concentrated salt solution. To do this, fill the pan with a small amount of water and put on low heat. Add salt until it no longer dissolves. We dip the branches of spruce, pine or any other plant in a hot solution and leave for a while. The process of crystal formation goes much faster in warm water! We let the water drain and leave the plants to dry for 4-5 hours. Sparkling frost is guaranteed! If you add brilliant green, food coloring or ink to the salt solution, then the frost will turn out to be colored!

13. Artificial snow for the "snowball"

Ingredients:
Paraffin candle
It must be grated on a fine grater. Such "snow" is great for making toys "a la snowball" when glycerin and artificial snow flakes are added to the water. The container is hermetically sealed and when shaken, the snow falls smoothly to the bottom.

You can really go the simpler way - and add ordinary sparkles to such a ball. It will turn out no less effective.

14. PVA and flock snow

Flock is a very finely chopped pile. And if you are lucky enough to find a package of white flock on sale, rejoice. After all, now you will get “snow” for any craft in a matter of minutes. It is enough to generously grease the surface with glue and sprinkle flock on top (you can use a strainer).

15. Snow from PVA and starch

Ingredients:

2 tablespoons starch

2 tablespoons PVA

2 tablespoons silver paint

Thoroughly mix (grind) the ingredients.

Such snow is suitable when it is necessary to decorate the surface of the product with a bulky white mass.

16. Mass imitating snow

Ingredients:

fine quartz sand or semolina or foam chips

white acrylic

thick PVA

1. Pour a small amount of your chosen material into a bowl. Approximately 1 faceted glass.
2. In this bulk material, we begin to gradually add white acrylic paint. From experience, it is better to buy it in a hardware store for facade work. We add to such a state that our loose particles stick together, but do not float in the liquid.
3. Then add PVA, preferably thick. We also add quite a bit so that the mixture is elastic and viscous.
4. Well, some silver sequins. We mix everything and ... everything !!!

Edible snow recipes.

17. Sugar snow

Ingredients:
sugar.
Dip the rim of the glass (glass) in water or syrup, and then in sugar.

18. "Snow-covered" plants
Ingredients:
gum arabic;
egg white.
With the help of these components, plants can be candied (non-poisonous and non-bitter). Flowers of pear, apple, cherry, rose, violet, primrose, lemon, begonia, chrysanthemum, gladiolus, pansies have good taste. Candied leaves of mint, lemon balm, geranium are obtained beautiful and very fragrant. Dissolve 12 g of gum arabic with constant stirring in ¼ cup of hot water (in a water bath). Cool the solution. Prepare sugar syrup: 100 g of sugar in ¼ cup of water. Also cool. On plants, apply with a brush first a solution of gum arabic, and then sugar syrup. Sprinkle with fine granulated sugar (but not powdered). Dry on parchment paper or tracing paper. Such "snowy" beauty will not deteriorate for several months. These flowers can decorate a birthday cake or your favorite small sweet pastries.

19. "Snow-covered" plants - option 2

Ingredients:
egg white;
sugar.
Beat egg white and sugar until foamy. Apply with a brush to the petals of the plant and sprinkle with powdered sugar. Put the plants prepared in this way on parchment and put in the oven on a small fire. Two hours later you can admire the beauty!

20. salty "snow" for meat

Ingredients:
a pinch of salt;
egg white.
Beat the egg white and a pinch of salt in a steep foam with a mixer. Lay this impromptu snow on the meat and send it to the oven! Miracles: a chicken in a snowdrift!

I really hope that from these 20 options for artificial snow recipes, you were able to choose the right one for yourself. Good luck! We'd love to see your work!