Cots for babies: options, components, equipment and materials, manufacturing technology. Budget crib for a newborn Drawings of cribs for newborns

Always is DIY crib the production of which we will consider today. This is an important part of not only saving on materials, but also showing your parental concern for the welfare of the child. Choosing interesting project and by customizing it to the parameters of both your child and the room in which such furniture will stand, you will be completely confident in its reliability and safety for children's health. In addition, it will also be necessary to focus on at least important aspects comfortable and safe sleep for your baby - a weightless canopy and comfortable soft sides that can be mounted under any bed model.

DIY crib: photo

Thanks to its compact dimensions, DIY crib, photo which you will see in most cases in this article, is a product of low complexity. And relatively few materials will be needed for it, and assembly will take a minimum of time, especially if you have the skill to use tools. The motives that motivate you to make can be different, for example, it may be the desire to combine both the desired material and the required shape in one model.


A lot of parents face this problem, because now on the market there are mainly models using MDF and chipboard, which can only conditionally be classified as suitable for children's furniture. But models that use solid wood often cost exorbitant amounts of money, and they are designed as if for palaces, they are so huge and non-functional. Therefore for dads perfect solution- study the manufacturing instructions DIY baby crib step by step, photo which are available on the Internet, and begin self-assembly.


Another category of parents who fully develop and want to see inside, of course, exclusive furniture, ideally matching the style of the bedroom design. The fantasy shapes that you can see in the photo above should not confuse you, because in this case you have everything you need for sleep, first of all, a correct and comfortable mattress. And kids who love fairy tales and everything unusual will certainly like this solution in their room. Therefore, to individually develop the design of the frame (in the form of a car, carriage, boat, elephant) and ensure that sew a canopy for a baby crib with your own hands, and then decorate it with appliqués and patterns, they will be completely delighted.

DIY crib - drawing

The beginning of all beginnings for the formation of the project DIY crib - drawing. You can find a few examples in the photo below, or you can come up with them and use your imagination. It would be useful to use special online programs, which are intended for furniture design, there you can find standard models and understand how parts are cut and assembled.


Any model, from the simplest to the most, must meet several criteria. This is safety, which includes a wide range of criteria, from environmentally pure materials, until the legs are resistant to swaying. This is also a criterion for ease of use, that is, not only should it be comfortable for the child to sleep inside, but it should also be convenient for you to put him in and take him out. The structure must provide a bracket or other fasteners for the future canopy, toys and mobiles that develop and entertain babies.


For both babies and older children, the issue of storage always remains relevant. large quantity things, therefore ideal solution becomes . Independently, using accessories that are available in construction stores, you can do everything a professional furniture maker can do. That is, form drawers, screw guides onto the bed bases and special rollers onto the bottoms of the drawers themselves. You should immediately make the bottom of the box reinforced so that it can withstand a fairly large weight of things; in any case, there will be quite a lot of them.


In addition to the classic model, which is a bed rectangular shape with sides, you can make other varieties that also have a special functional purpose. For example, make not a bed, but a cradle that stands on round legs and can rock, rocking the baby. This option can be called traditional and even folk, but today it is used only as an aid for rocking babies, and not for their proper sleep. And a ready-made cradle costs so much money that parents often refuse such an extra expense. That's why self-production will be 100% justified from an economic point of view. Another useful model is an attached module, which allows you to go through an intermediate stage in weaning your baby from the parent’s bed. He seems to sleep with his parents, but on his own territory. You don’t need deep drawers for this one, because you won’t be using it for a very long time. All the more reasonable it would be to make such a furniture element yourself.

DIY baby canopy crib


But even if manufacturing seems to you an impossible task, complicated and too responsible, then there is still an opportunity to make your baby’s sleep more comfortable and create this comfort with your own hands. It's about sewing children's canopy on the crib with your own hands. This useful device helps protect the child from flying dust, annoying insects in the summer, and simply give him a greater sense of privacy, shade, and therefore a more restful sleep.


There are several types of canopies, at least the main ones, and you can see these types in the photo above. Mainly for do-it-yourself canopy for a crib, photo This is shown by using light, lightweight fabrics that will fit perfectly into the nursery’s decor and will perfectly cope with their main responsibilities - not letting in dust, but letting in a sufficient amount of air and light. The choice of fabric generally depends on your personal preferences in terms of color, but from a functionality point of view, it is better to choose natural fabrics that do not cause allergies and are easy to wash (and you will need to wash this children's household item quite often).


You should also make the choice of the model itself based on the generated design. In some places, a canopy that is mounted on a high bracket and formed on the basis of a hoop would be appropriate, and in others, a fastener that is mounted directly into the wall and from it the fabric spreads down in two panels, forming something like a tent or marquee, will look beautiful.

DIY canopy for a crib

Step-by-step execution do-it-yourself canopy for a crib You can find each of the proposed methods in the public domain; this is a simple science that anyone who has ever held a needle and thread in their hands can do. We will look at a multifunctional option, which, in addition to the head of the bed, can also decorate the summer cottage or in kindergarten.


The basis of the work will be a round hoop on which you need to collect the fabric. You can buy such a hoop ready-made at a hardware store or use unnecessary hoops that are lying around your house. Diameter in this case special significance does not have, but for beautiful drapery, the larger the hoop, the large quantity fabrics you will need to use. You can see an example of the first stages of creation do-it-yourself canopy for a crib step by step. First of all, the fabric itself is processed, the sections are hemmed and trimmed with an overlocker if they are thin and fray well. We do this so that even with active use, our canopy will last as long as possible. You need to form a pocket in the upper part of the fabric, where you will either thread the hoop wire, or which you will need to clamp between the circles of the hoop. There is also the option of fastening using metal eyelet rings, then you will have at your disposal greater mobility panels But you need to understand that the system on the eyelets will not be silent, so you need to choose either ease of use, or silence, the inviolability of sleep for the baby.


Try to decorate the canopy fabric using artificial flowers, fabric flags and other decor. In addition to the fact that such a product will give you great pleasure in an elegant room, it will also be interesting for your baby to lie down and look at the bright fragments on the fabric.

DIY bumpers for a baby crib

And the last stage of man-made creation of an ideal bed for a child - DIY crib bumpers. They have a very specific purpose - the safety of the baby, softening the hard walls, which he will certainly want to study over time. From this curiosity, another function of the sides grew, which no one thought about at the beginning - they become an excellent educational toy, with the help of which small man begins to study the world around him.


And until now, in models of homemade bumpers, two large groups can be distinguished - some are aimed at softening the walls, creating additional barriers and obstacles so that the baby does not roll down or fall out of the bed, and the second group represents a huge variety of bright, funny, soft, ringing, rustling elements that can replace a real developmental mat.


The sides, of course, are always made removable so that they can be washed and cleaned on time. But also the ability to move allows the same elements of the sides to be used on the changing table during physical education and massage, and in the crib and playpen. Staring bright pictures will help the child to be distracted and it will be much easier for the mother to cope with the tasks of baby hygiene.

How younger child, the simpler the images on the side can be, the main thing is that they are bright and contrasting, which will attract his attention. It is during this period that it is better not to be led by your ideas about beauty ( pastel colors, blurred, muted colors), and be guided by the physiological aspects of newborn vision. But later, when the baby begins to show increased interest in the world around him, it is worth sewing bumpers with built-in elements that will crunch, squeak, ring, use varying degrees filling and texture of fabrics and so on.


Buying a baby bed for a baby who is about to be born is a necessary expense item. family budget. Such designs are not cheap, so it’s worth thinking about how to make a children’s bed with your own hands. if dad or grandfather have golden hands, then it won’t be difficult for them to unite and start working.

Everything will be ready for the newborn and mother to be discharged, because it will only take 2 days for the baby.

How to make a children's bed with your own hands: what to buy?

  • The mattress is hypoallergenic,
  • grinding machine (or rent),
  • roll sandpaper, if you don’t find a sander,
  • drawing paper,
  • jigsaw,
  • roulette,
  • tailor's triangle
  • corner,
  • nails,
  • screws,
  • anchor bolts,
  • plywood,
  • timber from natural wood,
  • furniture panels and corners,
  • slats and board.

How to make a children's bed with your own hands: no toxins!

Don't even think about using it at work fiberboard sheet Sanded or laminated chipboard: they release toxins into the air that will harm the health of the newborn. Only natural materials from beech, pine, birch or oak can be used.

At the same time, everything wooden blanks carefully sand with a machine or emery to avoid getting a splinter, which will definitely hurt and fester in the baby’s body.

Before doing this, buy a mattress: without it you will not be able to perform the calculations correctly, and it is advisable to buy a mattress for your child that will ventilate the bed well, for example, a bamboo one.

Get to work

If you decide to make a crib standard size, then draw out on a sheet of paper the parts that will fit into these dimensions: 90 by 40 by 50 cm. Then cut out the parts, placing them compactly on a furniture sheet and drill holes in four blocks of natural wood at a distance of 5 cm from each other so that you can It was necessary to assemble sides from the same timber, reminiscent of a lattice.

Try cutting a sheet of MDF at the bottom of your structure the right size, drill 10 holes for air and you can attach it to the frame with screws.

For the backrest, 90 by 30 cm plywood, which can be secured with screws, is quite suitable. If desired, you can varnish the crib, but this is not necessary.

How to decorate a bed?

A few bright ribbons or hand painted acrylic in a conspicuous place. do not use: the child should rest in the crib, and not distract himself from sleep with bright spots.

Baby crib: diagram, photo, dimensions. How to make a baby crib with your own hands.

The question of how to make a crib yourself usually arises among future parents waiting for a new addition to the family. Of course, you can buy a crib for a baby in a store, but in fact you can make it yourself from natural wood and it will be no worse purchased option. After all, for the future dad, a hand-made crib will also be a source of pride.

We drill holes in the mattress frame with a diameter slightly smaller than the diameter of the screw so that the screw is screwed tightly into the wood. We tighten the screws with a polyhedron wrench.

Then we fasten the side panels in the same way; we will need 8 screws, 4 screws per side panel.


A little effort and the crib for a newborn is ready, the crib does not need to be painted or varnished because when the child grows up a little and starts teething, he will inevitably try to gnaw the sides of the crib, so varnish and paint will not the best option for covering a baby crib.

The birth of a child is a significant and joyful event in almost every family. However, at the same time there are various hassles associated with preparing the necessary space for a newborn baby. This primarily concerns sleeping place. Few people can afford to buy a bed for newborns, given the prices today.

It must be remembered that the crib must be stable and safe for the child.

But there is Alternative option, which will allow you to save money is a do-it-yourself crib for a newborn. And if you approach this matter very responsibly and with knowledge of the process itself, you will end up with a bed no worse than one purchased in a store.

Where to start the creation process

Everyone knows that children never sit still. Therefore, the children's room should be the safest place in the house. Those. It is necessary to exclude objects that could injure the baby (for example, a nail or an ordinary screw that is not driven in completely).

Must be stable and safe for your child.

Diagram of crib sizes for a newborn.

In addition, it is advisable to equip it with a removable sidewall (the so-called decorative side). This will help the child climb into his bed on his own, without the help of adults.

What will be required when construction process? This:

  • electric drill and drills;
  • milling cutter (can be manual);
  • plane;
  • rasp;
  • roulette;
  • square;
  • hacksaw;
  • pencil or marker;
  • hammer;
  • level;
  • vayma (glue blanks);
  • brush;
  • screwdriver

From building materials:

  • nails and screws;
  • epoxy adhesive;
  • furniture plugs;
  • plywood sheets;
  • corners for connecting crib parts;
  • children's mattress;
  • stain, varnish;
  • edged board (4 cm) and bars (3x5 cm).

Return to contents

The construction process of constructing a crib for a newborn

Drawing of a crib for a newborn.

Before proceeding with installation, you need to purchase a children's mattress. After all, it will depend on him what size the bed itself will have.

  • For good rest It is advisable to build the child in dimensions of 120x60 cm (not cramped, and very comfortable). As for the height of the sides from the floor itself, it is 8-10 cm, the height of the back of the crib is 110 cm. The lower position of the berth of the crib from the base of the floor is determined taking into account safe height. Since the bed, originally intended for newborns, will be used in the future (up to about 4 years of age), the height should be about 30-35 cm;
  • the distance between the bars of a crib for a newborn should be 10-12 cm. This is necessary to prevent the child from being able to stick his head between them (no need to explain to anyone what can happen later).

Return to contents

Manufacturing of parts

The binding for the backs and transverse sides is made of coniferous boards.
The material itself must be processed with a plane or using a woodworking machine. In this case, the thickness will be 3.5 cm and the width 7 cm.

To make the frame, you need to take bars (section 3x5 cm) in the amount of 6 transverse and 2 longitudinal.

Using a tape measure, points are marked with equal intervals between them on long bars.

Then this frame is assembled, a drill is taken and through holes are made at the joints into which tenons must be inserted (you can use ordinary wooden wedges). In this case, for more reliable fastening, you can use glue that is applied to the joints. Don't forget to check the design with a square.

Baby bed headboard frames for newborns.

Here you need to take 4 long bars and 4 short ones. Moreover, each of them must be the same size (110 cm and 60 cm, respectively).

  • 2 pairs of structures are compiled. Those. 2 long by 2 short products (in the form of a “P”). In this case, all the bases of the bars must be in the same plane. The height to the bottom crossbar is 30-35 cm. Fastening occurs using nails or spikes;
  • then take 10 bars (the length from the bottom to the top crossbar). These elements will serve as a “grid”. Markings are made along the upper and lower crossbars, 5 points for each. The bars are inserted at these points (5 for each backrest).

Using a drill, through holes are made into which the spikes are driven. The backs are ready.

Manufacturing of rods

For these purposes, slats with a cross section of 2x2 cm (oak or beech) are used. Number of products - 22 pieces (11 for each side panel).

  • Using the same drill, holes are made at each of the ends of all slats. Using a tape measure, identical sections are measured on the prepared frame and also drilled;
  • then 2 more beams are taken (along the length of the crib for a newborn) and holes identical to the previous ones are made in them in the same way. The ends also require notches for tenons.

The modern market offers a sufficient selection of children's furniture, including cribs.

A child will be able to sleep in his crib for a maximum of four years, then he will have to change it to a more adult-sized version. And the price of furniture is not cheap at all, so there is an option to make a comfortable crib with your own hands. It's not as difficult as it seems at first glance!

It is not at all necessary to be a professional in this field and spend a lot of time on assembly.

The first thing you need to do is purchase exclusively high-quality environmentally friendly materials and take this issue seriously, considering the entire upcoming process.

The photo of a do-it-yourself crib shows how to make one for a five-year-old child, but all of the specified parameters can be increased to a larger size.

The benefits of a self-made bed

When you go to a furniture store, you can find a lot of options for children's beds from various materials(plastic, fiberboard, chipboard, wood). The best material, of course, wood, which provides safety, durability and is the most durable option.

A finished wooden crib is quite expensive. Not every family can afford such costs, especially since it will only last a few years.

The cost of a hand-made design will be several times less and has the following positive aspects:

  • reliability in use of the design. Children often love to play and jump on the bed, and you won’t have to worry that it will break under the load;
  • You can make a strictly individual bed. Which will suit the style and interior of the children's room and has individual sizes;
  • The creation process will help you spend time with interest with your child, who will probably not refuse to help his parents.

Purchasing the necessary material and preparing tools

To begin with, you should carefully prepare the room in which the planned process will take place. If it will take place directly in the room, it is wise to cover the floor and furniture with film, since a lot of dust and sawdust will appear during the work.

Then you need to properly prepare exact drawing DIY cribs for a newborn, or find a suitable sketch on the Internet.

You will need a number of materials:

  • self-tapping screws of different diameters;
  • wooden panels for furniture;
  • special wheels with which the drawers will be pulled out;
  • sheet of plywood or metal grill for the base of the bed;
  • sandpaper for processing cuts.

The set of tools is absolutely minimal: electric jigsaw, grinder and regular drill.

It is important to first, before drawing up the drawing, measure the mattress that will be placed in the crib, since later it will be more difficult to choose the right size!

Step-by-step making of a baby crib with your own hands

Having decided on the size and design of the children's bed, you can begin the actual work:

  • All necessary markings are carefully applied with a pencil, not forgetting about the edges.
  • Then, using a jigsaw, you need to carefully cut out all the parts.
  • It is necessary to cut the metal corners of the required size, immediately drilling holes in them (maximum five), into which self-tapping screws will be mounted in the future.
  • To make the base of the mattress, you need to screw the corners to the bottom of the sides.
  • Having conveniently placed the crib on its side, you need to assemble all the necessary parts.
  • Use sandpaper to smooth out possible irregularities and sharp corners.
  • There are spacious drawers at the bottom of the furniture.
  • It is wise to coat the crib with varnish or a similar coating, which will give it an aesthetic appearance.
  • The final stage: place the mattress on the bottom of the bed and spread the bed linen.

Accessories for baby's bed

Crib for small penis families must be equipped with sides that will serve as protection for the baby. It’s very easy and fun to sew the sides of a crib with your own hands.

Their most popular type is the option that protects all four sides and is secured with regular ties.

Note!

When choosing fabric for children's bumpers, you should opt for lightweight materials with not too “pretentious” patterns, since the baby will have to study the patterns around him for quite a long time.

A cape over the crib protects the child from insects and possible drafts. It is also possible to make an original canopy for the crib with your own hands by choosing the right fabric.

It is better to buy two different cuts (quite wide for the allowance) natural material: weightless, light, summer fabric and denser fabric for winter. First, you need to purchase a frame that attaches to the bed. Then draw a pattern according to size, cut out the parts and sew them in the right places.

With imagination and minimal skills, you can make an original, unique crib that will serve and delight both you and your baby for several years!

DIY crib photo

Note!

Note!



Fitting © 2023 Design and interior of apartments