Covers for garden furniture with their own hands. Sofa cover universal and elastic. How to sew a cover for a sofa and armchairs with your own hands. Universal sofa cover

Removable type covers to protect the upholstery of the sofa, armchairs in last years gained great popularity. They perform a number of important functions: they protect the fabric of the upholstery of upholstered furniture from pollution, damage, they are an interior decoration, a stylistic accent, and so on. Let's take a closer look at how to do-it-yourself sewing covers for upholstered furniture, tips from experienced designers.

Furniture covers allow a person to change the appearance of upholstered furniture beyond recognition. These are practical and attractive products that protect the upholstery of upholstered furniture from wear and tear. Do not think that the product is not wearable. If low-quality material was used for sewing covers for upholstered furniture, then the product will not last long time. Very quickly, it will become unusable, thereby endangering the sofa or chair itself. Because why it is necessary to start the process with the choice of high-quality material.

It is not necessary to select expensive material for work if we are sewing a cover for the first time in our lives. It is better to prefer practical, affordable textiles that will be easy to work with.

Choosing fabrics with high strength, elasticity.

The amount of material that will be required is calculated as follows: two lengths + two widths of a sofa or chair.

microfiber

Required Tools

If you try hard, you can sew such a cover yourself. And experienced designers will tell you how to do it without any problems. Read this article. Sew a cover the right way the first time it may not work, as the technology is quite complicated. But if everything works out, you can even transform attractive design the best way.

Making furniture covers with your own hands should be done using the following tools:

  • scissors - the main thing is that they are well sharpened, then there will be no problems when cutting the material;
  • a set of needles with a bead at one end. They will be required to fix the details of the paper pattern on the fabric. The more needles you have, the more convenient it will be for you to cut out the details of the future cover;
  • sewing machine;
  • measuring tape - with its help it will be necessary to measure upholstered furniture;
  • a simple pencil for marking on paper;
  • chalk for marking on fabric.

In other words, with the exception of the sewing machine, all the tools described are present in every home. But there will be no problems with the machine either: you can ask your friends for it.

Taking measurements

It should be understood that each specific piece of furniture is individual, has certain characteristics: width, length, depth, height. To perform accurate tailoring of furniture covers, you will need to measure the object correctly. This will allow you to understand how many details you need to cut out, as well as what form for the cover will be most acceptable, convenient, beautiful.

Use a measuring tape to carefully measure each piece of the sofa. Next, you will need to write down all the numbers, but it is better to draw a diagram with the marks of all the parameters of each part and their numbering. Remember that you will need to add 2 cm to the measurements taken - allowances for the seams necessary for the evenness of the seams.

And the amount of fabric that will be required to sew the product can be calculated according to the following scheme: we take two lengths and add two widths of the sofa to it. So you get the amount of material that you need to have available.

To sew your own covers for upholstered furniture, you will need to make patterns. If a piece of upholstered furniture has a standard rectangular shape, or is it corner models, which has walls and backs of the usual straight shape, it will not be difficult to make a pattern for it. After taking accurate measurements of each part, place them on graph paper, taking into account the direction of the equity line. Further, the calculations performed will need to be transferred to textiles using chalk.

The marking is applied to the wrong side, taking into account allowances for the seams. Experienced Designers it is advised to make large allowances that are easy to adjust after fitting. This will avoid mistakes.

To make a pattern, you need to get ordinary newspapers. Copy paper will do. Parts of the details of the sofa are “glued over” with it, you will need to outline their shape and cut out the details with scissors. All of them are assembled with adhesive tape and the pattern is adjusted directly "in place". The cuts are connected with adhesive tape, and the missing gaps are built up with new pieces of paper.

Cover tailoring

Many housewives are interested in numerous forums of needlewomen on the Internet, how to sew covers for upholstered furniture with their own hands. Tailoring will not take you much time if you read this article to the end.

You need to sew the details of the future product cut out of fabric using a sewing machine. Since the cover will subsequently experience high loads in the area of ​​\u200b\u200bthe seams, especially when the pattern turned out to be tight, some seams should be stitched twice. Designers do not recommend sewing too small stitches on a sewing machine. This will not add strength to the seams, but will destroy the fibers of the fabric.

If in some places the cover is too wide, it is worth sewing an elastic band to its edge. It is also worth using special Velcro, with the help of which the cover will acquire higher functionality. To fix the hem of the product on furniture legs you will need to use ribbons or cords.

decoration

If you have sewing skills, make your own sofa cover. To decorate it, you can use a variety of bows, ribbons, belts. Such little things not only make the product even more attractive, but also allow you to disguise some of the flaws made during work. In addition, decorative elements allow you to endow the sofa with individuality, and the master himself - to show his own sense of style, talent, and skills.

It is also worth decorating a sofa with a cover with interesting decorative pillows. They add elitism, comfort, practicality to upholstered furniture, hide from the eyes the inaccuracies of tailoring, which were made in some places. And if you sew pillowcases for them from the same material as the cover on the sofa, then the set will look very concise, harmonious, beautiful.

When purchasing new upholstered furniture, few people think that after a while it will lose its original view. The fabric will rub off, the armrests will begin to shine, and difficult-to-remove stains or holes may appear. It is easy to protect the upholstery of your favorite furniture or “give a second life” to the old one. It is enough just to sew a sofa cover with your own hands.

In the process of daily use, upholstered furniture wears out the fastest.

  1. Compared to restoration, this is a cheaper method.
  2. It is easy to use and easy to wash.
  3. Possibility to create your own unique design.
  4. The process does not require vocational training and takes several hours.
  5. You can make several models and experiment with the appearance.
  6. If next to the upholstered furniture there are chairs made of different kits, which do not harmonize at all, additionally made cases on them will solve the problem.
  7. Handmade products are highly valued.

The fabric fades, rubs off in places, stains, puffs, and others appear on it.

Since the cover will experience a lot of stress on the seams, especially if the pattern turned out to be very tight, some seams can be stitched twice.

Design and construction

Before you start sewing, you need to decide how the future product should look like. To do this, you need to analyze the type of your sofa. It can be double or triple, with soft or wooden sides or no armrests at all. The most difficult thing is to sew a cover on corner sofa with your own hands.

The fabric fades, wipes off in places, spots, puffs and other traces that are not pleasing to the eye appear on it.

It is necessary to carefully measure all sections and details, draw them in a reduced form on paper, then make a layout, taking into account the direction of the pattern or pattern of the fabric, the shared line.

At the same time, it should consist of several rectangular elements and completely cover the surface of the upholstery. You can fix it with an elastic band. Eliminate sagging cords or braid attached to the backstage, attached to the legs. Additional elements, such as frills and ribbons that pull together into bows, will add elegance.

Ordinary blankets or capes solve the problem only partially - they stray, move out, moreover, they close (protect) only the front of the sofa.

On the Internet, there are many patterns for creating models that resemble those offered in stores. So, if you decide to make covers for the sofa and chairs with your own hands, there is a diagram. For the kit, you can add a cover for a universal chair with an elastic band, sewn with your own hands.

Covers for sofas, chairs, armchairs are a proven way to update upholstered furniture with a minimum of financial costs and effort.

See how easy it is to turn any piece of furniture into a work of art using furniture covers.

Necessary materials:

  • sewing machine with the possibility of overcasting;
  • tailor's tape or tape measure;
  • ruler;
  • pins;
  • scissors;
  • a piece of chalk or soap for marking;
  • threads in tone;
  • and a little patience.

Updating furniture - even with the most careful and accurate attitude to furniture, over time it begins to shine, the fabric loses its color saturation, and is wiped.

The most important thing you need to sew sofa covers with your own hands is fabric. The material for the bedspread should be durable, wear-resistant, easy to clean. For these purposes it is recommended to use:

  • jacquard;
  • flock;
  • overcoat with a plush surface;
  • pleated;
  • microfiber;
  • leatherette;
  • eco-leather;
  • natural or artificial fur.

Fundamentally, the issue of updating and completely restoring the appearance can be solved by upholstery hauling, which is associated with certain problems and risks.

Removable covers for upholstered furniture not only keep the upholstery clean, but also have a number of other features. useful benefits.

To make a eurocover on a sofa with your own hands, you will have to purchase a more elastic fabric.

Covers allow you to update only the outer, outer surface, without interfering with the inside of the sofa, which means that the factory assembly of the sofa (armchair) is preserved, which will increase the duration of operation.

Sofa covers, chair covers or chair covers have become very fashionable these days.

The main stages of tailoring

The first step is to measure the armrests, ottomans, seats and backs. Then create a pattern and calculate the quantity required material. Each piece must have a seam allowance of at least 7 cm.

  1. All details are transferred to paper and cut out. The fabric should be laid out on a hard surface. The schemes are superimposed on the material and circled around the edge with a piece of chalk or soap.
  2. The cut parts are ground with a line seam, after which it is better to try on the product and secure it with pins. If it is small or loose, then you need to correct the pattern or change the size of the allowances.
  3. After adjusting to the dimensions of the furniture, you need to remove the excess parts of the fabric, leaving only 3 cm for allowances. Then you should overcast and sew the edges. The resulting cover is best washed in cool water and ironed.
  4. To create covers for sofas and armchairs with an elastic band with your own hands, you will have to perform several additional operations with the bottom edge. To do this, turn it inside out and draw a straight line with a pencil along which the elastic will pass. Then, you need to fix it parallel to the edge of the markup, fixing it every 5-10 cm with pins or thread. To sew in elastic, you will need a sewing machine that allows you to create a three-stage (elastic) seam.

The cover does not require special assembly- just put it on the sofa and fasten the Velcro, buttons or zipper.

It will turn out a beautiful cape on furniture - quickly and easily.

How to tie a case with your own hands. Step-by-step instruction

To tie universal case for a sofa with your own hands, you will have to spend a lot of time and effort. The product can be several interconnected canvases, knitted or a set of crochet square motifs.

Furniture protection - covers will be a real salvation if there are small children or pets in the house.

A sofa cover is really convenient both in practical terms and in terms of changing the surroundings.

To create a knitted cover, you will need to purchase thick threads, as well as a working tool. pattern and color scheme it is better to choose according to the interior. Can be used different kinds thread. As in the previous case, you will have to measure the furniture, prepare a pattern that must be followed in the process of knitting the fabric.

They, without limiting the use of furniture by all family members, will help preserve the furniture's original appearance.

It will retain the natural color of the upholstery for a long time and will not be damaged by the claws of pets.

If “motifs” are used for manufacturing, it is recommended to measure the area of ​​​​the pattern and one square. Based on the dimensions obtained, calculate the number of required squares, skeins of thread.

They will become a kind of barrier, preventing the appearance of puffs and scratches, animal hair does not stick and does not roll in the upholstery.

Your furniture will be reliably protected from dust and salting.

If the product is created from knitted fabrics, it is better to calculate the surface area in advance. Once in a sewing store, pay attention to the thread label. As a rule, two numbers indicate the knitting density on it. Knowing them, it is not difficult to calculate (on your own or by contacting an employee) the required number of skeins.

The fabric has a pronounced stretch effect, restoring its shape after pressure.

A lot of small villi are applied to a dense fabric base with glue, from which a velvety surface is obtained.

decoration

Decorate ready product you can use bows, appliqués or stripes. A decorative rope with a diameter of 1 cm is best suited for decorating the armrests. Framing with a wide braid or ribbon will help to focus on the lower part.

Sofa covers (armchairs) can dramatically change the visual perception of furniture.

Isoprene layer plus dense pile avoids puffs.

VIDEO: how to sew a do-it-yourself sofa cover

Sofa covers, chair covers or chair covers have become very fashionable these days. Removable covers for upholstered furniture not only keep the upholstery clean, but also have a number of other useful advantages. For example, the ability to easily and inexpensively change the design, not only of furniture, but also of the room. See how easy it is to turn any piece of furniture into a work of art using furniture covers. See how well you can "fit" new covers into overall design rooms.

Sewing covers allows you to transform your old sofa into a completely different piece of furniture, covered with new fabric, besides a suitable coloring and quality.
Perhaps the most important advantage of the covers is their low cost compared to the cost of a full sofa upholstery. It is enough to buy a few meters of fabric, get a sewing machine out of the closet and choose a suitable stitch and sew a cover on the sofa with your own hands, the main thing is to make a simple pattern correctly and accurately. But more on that below, first let's figure out how much you need to buy fabric for the cover.

Fabrics, of course, for sewing covers, whether it is an ordinary one-and-a-half or a corner sofa, you need not so little. Not less than 8 meters (width 150 cm) for any sofa, so it is advisable to use very inexpensive fabrics for sewing. It is important to covers for furniture easy to wash and iron, and also to be strong enough. Therefore, covers can be sewn not only from tapestry (furniture) fabric, but also from thin, but rather dense fabric. The thick fabric will prevent snags, which is especially important if you're protecting the upholstery of your new sofa or chair from your pets' claws.

1. Calculation of fabric for sewing a sofa cover


For sewing a sofa cover, you will need about 8 meters of fabric. But, in order to more accurately calculate the consumption, you need to measure the length of the sofa and its width. A rough calculation looks like this: two sofa lengths + two sofa widths. As a result, if the sofa is 160 cm wide and 200 cm long, then 7.2 meters of fabric will be required (width 150 cm). But, this is just a guideline, so that you can calculate in advance how much the fabric will cost approximately, and what kind of fabric you need to buy, for 2000 rubles per meter or still for 200 rubles.


An accurate calculation of fabric consumption without experience is quite difficult to do. It is necessary to carefully measure all sections and details, draw them in a reduced form on paper, then make a layout, taking into account the direction of the pattern or pattern of the fabric, the shared line.

Fabrics with geometric pattern, especially in stripes, will significantly increase consumption, since they can only be cut in a certain direction. It is best to use plain furniture fabrics, or, in extreme cases, with a small pattern. In any case, add at least another 0.5 - 1 meter to any of your calculation of fabric consumption for a sofa. This increase will not be superfluous, and if a piece remains, then it will be useful in the future to replace worn areas. From such a remnant of fabric, you can sew a cover for a stool or a small decorative pillow and much more. It is much more difficult when there is not enough fabric, but even in this case there is no need to be upset, since any other fabric, such as coarse calico, can be used for the back of the back of the sofa.

2. Pattern of covers for furniture


If the sofa is of a standard rectangular shape or even angular, but with walls and backs of the usual straight shape, then the pattern is easier to make. Having accurately measured each of the details of the sofa, you need to place them on millimetric paper (on a scale), taking into account the direction of the cut (share line). In the future, all these calculations must be transferred to the fabric, making markings with chalk, on the wrong side. When cutting, be sure to take into account allowances for seams, hem, etc.

It is impossible to give exact recommendations on how to make a pattern of sofa covers. Each sofa is a special case and the option of sewing a cover for him will be his own, unique. We can only give a few tips to avoid simple mistakes. Well, for example, it is better to make a pattern with large allowances, and after trying on, adjust these allowances by cutting them with scissors.

For a pattern, you can use ordinary newspapers or carbon paper, if you “paste over” parts of the sofa details with them, outlining their shape with a pencil and cutting them out with scissors. Then collect all these details with adhesive tape, and "boldly" adjust the pattern with scissors right "in place". You can connect the cuts with adhesive tape, the missing sections can be increased by gluing pieces of paper with adhesive tape.
The more precisely (densely) you will build a pattern, the more likely it is to make mistakes when sewing a furniture cover. The sofa only looks like rectangular shapes. In fact, its forms are very complex, guess their configuration exact calculation impossible. Even at the factory, furniture upholstery is not sewn according to a pre-made pattern, but is fitted, as if pasting a sofa with a film, fixing the stretched edges with clips (stapler clips). Therefore, do not try to exactly repeat the shapes of your sofa with the help of the "most accurate" pattern. It is better to make a more free-form sofa cover, as in top photo, whose main purpose would be to change it appearance, and not "drag" him a fabric upholstery.


Use all sorts of decorative bows, ribbons and belts. They are good at diverting attention from failed places and perfectly refresh the overall design of the room, and in addition, they will additionally decorate the furniture cover you have sewn.
Numerous decorative pillows are also able to hide many inaccuracies of a sewn cover, and besides, they can be used for their intended purpose. Sewing them is quite simple, approximately the same as sewing a pillowcase, and you can “fill” with anything, up to the scraps of fabric left over from cutting the sofa covers.

So that your beloved cats do not stick into the leather upholstery of the sofa even through the covers, it is advisable to put thin foam rubber (1-1.5 cm) inside the covers, which you can buy at any decent household goods store.

When sewing, use strong and reinforced threads, but not too thick, otherwise the sewing machine will be "naughty".

Since the cover will experience a lot of stress on the seams, especially if the pattern turned out to be very tight, some seams can be stitched twice. Just do not make too small a stitch on the sewing machine, stronger seams from this they will not, but it is possible to destroy the fibers of the tapestry fabric.


An old grandmother's hand-operated Podolsk machine is the best sewing machine for sewing covers. If you do not have such a machine, then we do not recommend sewing furniture thick fabric on household car. In extreme cases, on such a machine you can sew furniture fabric, folded only in half, well, in three layers maximum and then at the slowest speed.
Then think about how to make connections of parts to avoid multi-layered "crossings" of the fabric. Can do some parts common cover separately, not connected to each other? Separate cover for the back, separately for the seat, armrests. By the way, in the "design" of the cover, you can use twisted long zippers to close the cover or a linen elastic band. See also How to make a pattern and sew a pillow. In this article, the master will share his experience on how to sew a pillow and how to build a pattern for any shape of a soft pillow.

Linen gum can be sewn into the seams, in those places where you need to remove the "weakness".
"Velcro" can be used to connect the parts of the cover into one.
Various types of cords and ribbons are useful for tying the legs and tightening the hem, etc.

5. Take your time to sew a cover from expensive fabric


And most importantly, do not "light up" with the idea of ​​sewing a cover with your own hands, and even more so, do not immediately buy expensive fabric. Sewing covers correctly the first time will not work for everyone. This is a very complex and skilled job. Sometimes, even for a specialist, it is much easier to sew a dress for a non-standard figure than a cover for a seemingly ordinary sofa. First, sew a cover for a sofa or chair in the country from simple fabrics, and only then take hold of covers for furniture standing in the living room of your home.


Which furniture covers are easier to sew? Sofa cover or chair cover? You probably choose a chair cover, and in vain. The chair has a rigid construction, and the slightest mistake in the pattern will result in it either not being put on or will "hang like a bag". The only advantage of chair covers over upholstered furniture covers is that it smaller size and easier to customize the pattern. In addition, visually it always seems that very little fabric is needed to sew a chair cover. At least 1.5 meters, or even two. Multiply now by the number of your chairs. This article gives some recommendations on how to sew a chair cover with your own hands.


Letter pillows with their own hands. In this article you will learn how to make a pattern volume letters and the technology of sewing such a pillow.


Many women have tried to sew curtains, at least for the country house, and they know how difficult it is to do this, unless, of course, these are simple curtains. Curtains, especially tulle, are very difficult to cut straight and for some reason it always happens that it is either slightly skewed or shorter than expected. Tailoring of curtains, tailoring of covers for furniture is difficult process, requiring the qualifications of a seamstress and sometimes special equipment. But there is always something to learn. Maybe some of these tips will help you figure out how to sew a curtain with your own hands.


Furniture covers are very refreshing to the overall design of a bedroom or living room. But a special decoration of your bedroom can be a bedspread. Sometimes, it is enough to sew a bedspread, and your bedroom is simply unrecognizable. Everything in the room changes - both the color of the walls and the color of the furniture upholstery. This happens if the bedspread fits well into the overall design of the furniture and interior.


Quite easy to sew linens with your own hands and sometimes save a decent amount on the purchase of new sets of bed linen. Most importantly, you can choose the color of the calico and the quality you need and precisely sew the bedding to the size of your mattress or pillow. Of course, sewing a pillowcase, bedding is much easier than, for example, sofa cover but still need to know a few rules too.


It is possible to fill the sofa with an ordinary sheet, but during sleep it will certainly "go astray". It is much more convenient for a sofa to use a sheet with an elastic band. About how much fabric is needed for a sheet with an elastic band and how to sew it yourself, read this article.

How to sew chair covers with your own hands.

Chair covers these days they have again become a very fashionable garment for furniture.
Chair covers, chair and chair covers not only keep the upholstery clean, but also provide a number of other useful benefits, such as the ability to remove a soiled laundry cover if necessary. And sometimes, just an opportunity to easily and inexpensively change the boring color of the upholstery of the chair and the interior of the kitchen.
But still, often chair covers are sewn because of the banal protection from the claws of our pets - beloved cats and dogs. Cats really like to sharpen their claws on the upholstery of a brand new set. kitchen chairs especially genuine leather. Of course, they are not averse to sharpening them on the sofa, but the sofa can be covered with a blanket in the form of a cape, but only covers will save the chairs.
Perhaps the most important advantage of chair covers is their low cost, compared to the cost of a full constriction. In this article we will give some tips on how to sew a chair cover with your own hands, make a cover pattern.

1. Tailoring of covers is cheaper than a complete upholstery of chairs


It is enough to buy 1.5 - 2 meters of fabric, make the right pattern and sew it yourself. Fabrics for sewing chair covers can be used quite inexpensively, the main thing is that they are easy to wash and iron. At the same time, they must be sufficiently strong and dense, as the chairs are under constant stress, especially in the kitchen and dining room.

2. If there is no overlock, the edges of the parts for covers can be processed with a zigzag

Sewing is easy if you have a sewing machine at home, especially of the type Podolsk sewing machine. You can even leave the cut edges of the fabric unfinished if you don't have an overlock or the sewing machine doesn't zigzag. The main thing is to make a pattern, and precisely cut the fabric along it, taking into account allowances for the seam and hem. If you have experience, you can make a calculation on paper of the details of the backrest, seat, and then transfer the pattern to the fabric. True, it is necessary to take into account seam allowances, back bends, its thickness and many other points, including fabric shrinkage during washing.

3. How to take measurements for a chair cover


The pattern of the chair cover will be the more accurate, the more accurately you take measurements. Particular attention should be paid to the legs, as they usually have an extension to the bottom, sometimes only the rear legs and only to one side. So take as many measurements of the chair as you can and draw a diagram of your measurements before you start building the cover pattern. Determine the widest and narrowest sections and mark them on the drawing. Make a copy of the seat and back on paper by tracing the outline with a pencil, attaching the paper to these parts of the chair. Then cut with scissors and fit the pattern, applying it to check exactly on the back and seat. Make a markup on the resulting patterns and take them as the basis for building a further pattern. The rest of the details will have to be done using calculations.
All dimensions indicated on the drawing of the chair are conditional and are given only as an example, which measurements must be taken.

4. Before you buy a fabric, calculate its consumption


When the patterns of the details of the cover are ready, you need to make a layout of the fabric and calculate its consumption. When sewing chair covers, there is always a feeling that a little fabric is needed, a kind of visual deception. In fact, fabrics with a width of 150 cm, for any chair with a cover that has a skirt, 130 - 150 cm are required. Sometimes, depending on the length of the skirt and other decorative elements, for example, pleats on a skirt, you need to buy up to 2 meters of fabric for one chair.
Calculate, before you buy furniture fabric, exactly how much fabric you need. It is necessary to take into account allowances for seams, for hem hem, inaccuracy of cut. Do not forget to think about how you will take into account the width of the back and the "flare" of the legs when cutting the details. The simplest solution is to make an insert the width of the back of the chair, up to the sewing line of the skirt, and to expand the legs downwards, add a wedge along the edges of the skirt. Usually, fabric consumption for standard size the chair fits one and a half meters. AT this example we fit the front and back parts in the same width and made the height of the skirt from the remaining strip of fabric 25 cm, plus 5 cm for the hem and the seam. It is desirable to place parts along the share thread, as shown in the diagram.

5. Make Trial Cases with Inexpensive Fabric First

Very difficult to do without experience exact pattern on covers - anyway, something will be wrong. There are so many models of chairs and options for their manufacture that it is simply impossible to give a ready-made pattern for sewing chair covers. pattern on different shape and the size of the chair is made your own. One can only advise, before cutting the fabric purchased for covers, first sew "trial" covers, for example, from an old sheet or inexpensive fabric. Try on several times, and in the process of trying on, make adjustments, sometimes even opening the cover for this. And only after you achieve exact copy shape of your chair, carve out the final details of the covers on the fabric purchased for them.

6. To prevent the covers from slipping, they need to be fixed to the legs of the chair

When sewing covers, or rather, before cutting, think about how the covers will be attached to the chair. Even if the cover is worn entirely, almost to the floor, it will still "move out" while sitting and wrinkle. It is necessary to sew on the mount, in the form of ties at the corners and tie them to the legs under the cover. If the back and seat are sewn separately, then it is necessary to foresee how they will be attached to the chair. The best option- make a hem along the edges, where to insert an elastic band or a cord that can be tightened and tied (take into account the hem when cutting). This will securely fix the seat, and it will not slip and wrinkle.

7. Do not sew covers from too expensive fabrics

Some practical advice- do not sew from too expensive fabrics, otherwise you will have to sew covers on them later.
And yet, never sew covers "back to back" - chairs are not a pillow, and if the cover is at least a little narrow somewhere, it simply won't fit. The stock never hurts, and it can always be removed, besides, some fabrics may, after washing, "sa

Fitting © 2022 Design and interior of apartments