How to store wires and chargers - video tutorial. How easy is it to organize the storage of wires at home? How to store wires and chargers

Hello everyone! Often, when trying to organize our home, we forget about the details, which are very important and not conspicuous. First of all, we start thinking about storing clothes, kitchen utensils, books or cosmetics. But the wires from chargers, adapters, headphones continue to be in disarray. Therefore, the purpose of this article is to give you an idea that will help you choose the best way for you to organize your cords.

How to organize wire storage: the best ideas

It's very simple, let me tell you. You can create some of their organizers with your own hands, or you can not work, but just go to the store and purchase at very low prices. By the way, I saw a lot of similar things on Aliexpress, this is just a godsend for hostesses.

If you are constantly losing headphones from your phone, or charging from your camera, then immediately start reading the post. And then create a place that will become a permanent refuge for them.

Bushings from toilet paper. An unexpected decision, truth? A cheap and very easy way to collect wires, twist and put inside. By the way, you can store them not only in a basket, but also in a drawer, like an organizer. If you don't want to wait until you run out of toilet paper, you can buy cardboard and make your own. And to make them look decent, decorate with decorative tape or paste over with paper.

Boxes. The second and very easy way to eliminate clutter is to make boxes out of storage. The photo above shows the most best option when the inside of the box itself is divided by partitions, beautifully designed and signed each cell. Now you will never get tangled up in wires, chargers and headphones. And never throw away shoeboxes!

If your hands are not hooks, you know how to sew and have a desire to create something, then this option is for you. A simple fabric organizer for storing wires with elastic bands can not only be twisted, but also hung on a hook, for example, under a table.

Well, for those who are not familiar with sewing, a ready-made organizer bag is suitable. This is great way collect and neatly lay out chargers, cords and other accessories for equipment. In addition, it is very convenient to take it with you.

In one of the articles I wrote about how to use . So, I really liked the idea of ​​​​folding the cords there. Agree very convenient option.

There must be order both on the table and under it. It is not only beautiful, but also safe. Randomly scattered and disorganized wires create a fire hazard. Therefore, take this matter seriously.

The best, in my opinion, way to assemble the wires together is to use Velcro or stationery clips. And adapters and power supplies in special containers that can be bought or made from a shoe box.

A special solution was invented for headphones - cut a rectangle out of thick paper, make two longitudinal cuts on top, at the end of which cut out circles. Insert the speakers themselves into them, and wind the rest of the wire around the workpiece. Now you will not need to constantly unravel the knots.

Sockets on the walls, often also accumulate various kinds wires and chargers. Organizing them is easy enough. Exist special devices, which are attached together with the charger or wires next to it and are used safely without creating a feeling of clutter.

This is how I suggest you organize the storage of wires in your home. Share your ways! See you soon!

In life modern man technology began to occupy a special place of honor. In addition to keeping it in order, it is also necessary to look after all the devices that come with it. connecting cords, charging device, headphones - we need all this, but it turns out to be quite difficult to store it. The wires are constantly tangled with each other, it is difficult to get them and find the right one. To solve this problem once and for all, we suggest watching a video tutorial on how to properly store wires.

To use the life hack, we will prepare:

• shoe box;
• a sheet of cardboard;
• a few toilet paper rolls.

Cut out an insert from a sheet of cardboard required size in relation to the length and height of the shoe box. We insert it into the box so that on one side it remains more space. If desired, you can fix the insert with tape or a stapler.

The part that is larger is filled with toilet paper sleeves. You will need as many pieces as you have wires. Based on this, we choose the size of the box.

When one part of the box is filled and divided into small sections, you can fill the box with wires. As you already understood, we put thin wires in small compartments that do not take up much space. In the part of the box that we separated with cardboard, we put large wires.

Now, all cords and chargers are neatly arranged, and you no longer have to look for them all over your house or apartment.

Where do you store the charger from mobile phone? Most people have it either thrown into one of the drawers or left carelessly on the table or floor. And if there are several chargers, then this is often a black tangle of wires, bringing disharmony to any place, wherever it is.

If a designer has worked on the interior of your house, then the presence of such an “artistic” stain is simply unacceptable. In today's post, we'll share a few ideas on how to nip this problem in the bud.

The abundance of outlets with protruding cords looks sloppy. It is more practical to hide them inside a cabinet or drawer, as shown in the photo below.

Individual charging ports keep wires from getting tangled up. Place the devices in the part of the apartment where you visit most often. Sometimes, contrary to expectations, it may turn out to be a corridor or a kitchen.

Bar cells are a suitable place only if you are not very addicted to alcohol.

Another option for placing inside the furniture.

The container may look like one of many boxes, and no one will notice the connectors. For greater aesthetics, it can be decorated.

Constantly tangled headphone and charger wires sometimes cause a lot of inconvenience. And sometimes they also arise due to the fact that everything is scattered in different places: one cord is on the table, the second is in the nightstand, the third is somewhere in the bag, etc. Familiar situation? We suggest you sew an organizer for storing wires and chargers with your own hands to get rid of this problem once and for all.

A convenient storage system will help you keep organized by collecting all the cords and adapters from your gadgets in one place. Over time, you will appreciate the comfort of this simple organizer on elastic bands, quickly learn to always return the wires to their place. This will save you time and nerves, which are invariably spent on unraveling numerous cords.

All sizes in this master class will be indicated for sewing the organizer that you see in step by step instructions on photos. Of course, you can easily replace them with your own parameters by making a cable case to your liking.

We will need:

• fabric for interior decoration(1m);
• fabric for exterior finish(1m);
• piece of felt;
• elastic band 2-2.5 cm wide;
• another elastic band 0.5-1 cm wide;
• metal clasp;
• lightning.

To sew a cover, it is best to choose soft durable cotton or coarse denim. Chintz is not worth taking - it is too thin. You can take linen, but the finished wire organizer from it does not look so beautiful.

It is worth starting work with the preparation of patterns for the internal and external parts of the organizer. To do this, cut out two pieces of fabric measuring 22 × 15. They need to be ironed, folded front side to each other and flash.

At the same time, we insert a zipper, after cutting it to fit the pocket of the future charger organizer. We will get something like a cosmetic bag or wallet. If you have chosen fabrics that are too thin, then seal the blank for the cover with felt.

At the next stage, we need to prepare the main canvas of the organizer for storing wires. To do this, you need to cut out two blanks from fabrics for interior and exterior decoration, as well as a piece of felt pad. Please note that the soft liner of the future cover should be about 0.5 cm shorter than the main parts in length and width.

We fold the fabric with the front part to each other, and put the felt on top. If you have a sewing machine, it will be easy for you to sew along the edge of the organizer body. If not, you can sew the workpiece manually. However, first you need to sew on an elastic band.

Mark its base at the top and bottom of the organizer. The loops must be formed immediately, so the length of both elastic bands should be about 4-5 cm longer than the canvas itself. Collect loops in several places on the organizer: make them as many as you plan to place the wires. Don't leave too much space between the elastic bands to keep the cords secure. But do not sew them too close, otherwise it will be inconvenient to insert the wires into the organizer.

When the elastic bands are attached, we begin to sew the body of our craft. Leave a small opening to turn the piece inside out. When finished, darn it by hand.

The part in the form of a "purse", which we sewed first, will be fastened to the organizer with buttons. Right now you need to attach them. The fastener is sewn into the central part. It is convenient to use a ring piece so that the accessory can be hung and rolled up if necessary.

Ready! As you can see, it’s not too difficult to sew an organizer for storing wires and chargers with your own hands. The zippered pocket holds adapters and large blocks, while the loops hold folded cords and headphones. This functional case will help you avoid the problem of constantly tangled chargers and make your life much easier.

To make your organizer more beautiful, choose a bright fabric. You can additionally process the edges with beautiful braid, the buttons can also be made decorative. It all depends on your imagination.

Views: 1 022

HOW TO HIDE THE WIRES

The problem of wires, cords and cables getting under your feet will probably be relevant until absolutely all devices become wireless. Then blessed times will come and all these snake balls of tightly tangled wires will be forgotten like a nightmare. I hope that it will be very soon, but in the meantime, let's try to somehow disguise these recalcitrant writhing, dust-collecting and spoiling the interior cords using a variety of methods.

The most thorough way to hide cables and wires is to hide them in the wall, under the floor or hide under false ceiling. True, this is done even before the repair stage. Also a very popular way are special skirting boards with built-in cable channels. These skirting boards are attached with clips, so in order to remove or place the wire under the skirting board, you just need to remove it and then fix it back without any tools.

Well, if the repair has already been done, then in this case only different ways disguise. You can mask the wires using commercially available plastic boxes white or woody. The body of the box is attached to the wall, wires are laid inside it and closed with a lid-plate.

However, from an aesthetic point of view, this is not the best solution. Such boxes do not look very nice and are more suitable for offices.

If you don't want to ruin your interior with plastic, try using bamboo or other hollow reeds. Cut the bamboo trunk in half, attach one half to the wall, lay a wire in it, and close the trunk with the other half, putting it on glue. The result is very decorative bamboo poles on the wall, especially suitable for Japanese-style rooms.

Here's another one original way hide the wires for those who have flat baseboards installed. With the help of such a pretty fence, you can quite successfully hide all the wires running along the wall.

If the wires go straight along the wall, then you can not hide them, but decorate them with original plastic leaves and a bird. You can make such things yourself from unnecessary plastic bottles of beautiful colors, for example, from ketchup, shampoo or detergent.

Most of the wires usually accumulate in the area computer desk. The computer itself and its peripherals create a whole jungle of wires and cables. One way to somehow organize this jungle is to put all the wires going in the same direction all together with the help of different devices.

These can be ordinary flexible wires that are used to twist new cords and wires when packing. new technology, disposable ties or special strips Velcro, like mine.

These Velcro tapes are very easy to make yourself, because Velcro is sold in any needlework or sewing department. There are also special corrugated or spiral cable organizers. All cables going in one direction are put into this tube and the result is one thick pipe.

Folk budget way combine all the wires - put on them a golf jacket or a stocking from pantyhose.

But what if all the wires go to different sides? Then they can be put on the back edges and legs of the table, secured with special eyelets or with tape (if you don't want the tape to leave marks, use masking tape).

Or you can use special gutters that are hung from the countertop, and wires and extension cords are placed in it.

You can hide all the wires, small devices and extension pilots under the top of the computer table. True, for this you will have to drill holes in it. In stores like Ikea, a special wire organizer basket is sold, which is attached under the countertop.

And in order to know which wire belongs to which device, labels with device names should be attached to them.

And here is a way to hide the wires behind the table, requiring almost no effort. You only need one foam tiles for the ceiling, with which you can simply close out of sight all the mess of wires!

Behind the TV there are also a lot of wires. For them, you can adapt a plastic or cardboard box with holes.

For computer wires, you can arrange a box in the form of a large button from the keyboard.

Today, let's take a look at and put in order the numerous coils of cords, wires and cables that appear in the house literally from nowhere and begin to gradually accumulate, entangling our house with their "tentacles". Taking advantage of the fact that we cannot just take them and throw them away, since nevertheless they sometimes come in handy and are useful in some situations, these obnoxious balls, skeins and bundles accumulate in boxes, drawers tables, on the balcony, on the mezzanines and in the pantries. Let's finally try to sort out all these intricacies, put them in order and organize them so that later, at the right time, you can easily find them.

What is usually the habitat of extra cords and wires? As a rule, they are lying around the house, and when the need arises for them, you won’t find them with fire during the day! But, let's say we decided to put all these cords together - then what will we get? In this case, it will be some kind of cardboard box, box or old bag, where all the wires are collected indiscriminately, lying there at random, in best case coiled into a ball, at worst - tangled with each other in one heap. How to order and organize them in such a way that, firstly, you know which wire is from what and, secondly, you know where to find it at the right time?

carton box(and maybe more than one) as a way to store wires in order, we will not brush aside. In the end, this is the most accessible and common container for storing anything. But, if you want aesthetics and beauty, then of course, you can pick up some pretty basket (wicker or plastic), fabric box or transparent Plastic container and put all the wires into it. The most important thing is how to put them there!

Here is what the box with wires looks like before and after putting things in order:

To begin with, put all the wires in the house into several piles (especially if you have quite a lot of them) according to their purpose. For example, wires for a computer - in one pile, audio / video cables - in another, extra cords and chargers from mobile devices- in the third, etc. The main thing is that they do not lie around your apartment. Note that now we are talking only about extra wires and cords, which we will keep just in case. I already wrote about the masking of existing wires in the article, and I will write about the storage of chargers, headsets and headphones of those mobile devices that you use right now in the next article.

So, we put all the wires in piles, and now they should be untangled, disconnected and signed. And most the best way this is considered to be the use of such simple items as cardboard rollers (rollers) from toilet paper or paper towels, empty clean juice boxes and transparent bags with slider closures. So, as I warned in the article “Not everything that seems unnecessary is garbage”, from now on, do not rush to throw away the things listed above, but try to save them and use them to store wires.

Again, for lovers of prettiness, I can advise you to decorate toilet paper rolls with a beautiful wrapping film or self-adhesive film using this instruction:

Step 1. We will need a cardboard roller, a rectangle of wrapping paper, the width of which should be 2-3 cm longer than the length of the roller, and the length should be such that the roller can be wrapped, tape and scissors.

Step 2 We turn the tube out of paper, connecting the edges with tape.

Step 3 We insert the roller into the tube, and cut the excess ends and wrap it inside the roller and fix it with adhesive tape (or, if it is self-adhesive, it sticks inside itself).

Result: it turned out a beautiful tube for storing a coil of wire. If you want, you can make an inscription on the tube about what kind of wire it is and what device it is from.

But not every wire can fit into such tubes. For example, chargers with large adapters will not fit into them. This is where boxes of juices, milk or breakfast cereals come in handy. Of course, they will need to be prepared first: cut off the tops, beautifully process the edges (with the same self-adhesive), wash and dry (if they had a liquid product). Also good idea- fold each cable bundle into a separate transparent bag with a lock - then everything will be visible, clearly and at the same time neatly.

Another good idea is to use foam insulation instead of cardboard rollers, which are usually sold in repair or housekeeping departments. The wires tied into a coil are perfectly placed in them and are also stored separately and do not tangle with each other.

As a result, after applying all these methods, you will get one or more boxes or baskets with ordered and neatly laid wires. It remains only to find for them appropriate place and from now on you will not need to run around the house looking for the right cord or cable!