How to wrap old furniture with foil. Not sure how to update an old closet? Budget ways

Do you want to update old wardrobe, furniture or interior in the apartment? It is self-adhesive film that will make your goal a reality! Undoubtedly this a budget option you will like it. Doors, a chair can easily be given a woody effect, and a wardrobe can be decorated with trendy patterns. With the help of a self-adhesive film, glass products can also be improved. Read on and you will know all the secrets about it. wonderful material, how to decorate your favorite interior items with it, how to properly glue a self-adhesive film on furniture so that there are no swellings and bumps.

What is a self-adhesive?

Self-adhesive film is a vinyl or plastic film with decorative design(color, pattern, texture) on one side and an adhesive layer on the other. Glossy paper base protects the adhesive layer from dust and damage until it is used. After cutting, the paper surface is removed and the film is transferred to the desired surface.

Self-adhesive film, able to realize any design solutions and create good protection for any interior items. It is versatile, and also has several other advantages:

Good response to environmental influences.
Long service life.
Large range of expensive rendering effects.
Excellent contact with any type of substrate.
Good moisture resistance.
Simplicity and ease of care.

Below we will take a closer look at the types of such material, how to properly stick a self-adhesive film on furniture.

Film types according to underlying material

Polyvinyl chloride.
Polyester .
Propylene.

These materials are quite affordable, reliable and safe. Paper, natural and synthetic fabrics are also used for film production.

Types of film by structure

According to the structure of the canvas, the following types of film are distinguished:

Single layer. The composition of this material includes multicomponent mixtures, which include polyvinyl chloride resin and various plasticizers. Stabilizers and pigments are also used as auxiliary substances. Further, all substances are mixed into a homogeneous mass, which, in turn, is formed into a film.

Important! The physicochemical properties and stiffness of the film are directly dependent on the type of plasticizers added.

Double layer. Two separate webs, the backing and the cover, are made for the production of two-layer coatings. For the base, fabric or paper is most often used, and for the coating - polyvinyl chloride resin. Used for manufacturing various methods molding. As a result, more plastic webs are obtained, which facilitates the convenience in their application.

Important! Specifications of such materials is somewhat lower than that of a single-layer film.

By type of canvas surface

The attractiveness of the decorated surface and its combination with other interior items directly depends on the quality and type of surface of the self-adhesive film. There are the following types:

Glossy - appropriate for darkened rooms.
Matte - in perfect harmony with a room where there is a lot of light.
Mirror - suitable for any room, including the bathroom.
Transparent - used for decoration glass surfaces.
Holographic - for any surface to create an original effect.

Decorative possibilities of the film

In the current market provided wide selection self-adhesive films for decoration different surfaces. The range allows you to accurately select the right coating for solving the problem. So, all self-adhesive films are divided into two versions.

Standard

The standard version is available in a single color version in various color palette and includes the following types of imitation:

Imitation of precious wood species.
Imitation stone.
Ceramic tile.
Textile.
Canvas.
Tapestry.
Children's stories.

special purpose

Under velour.
Gold, metallic, silver.
Imitation cork cloth.
Thick films for furniture, countertops, window sills.

Ways to use self-adhesive film

Such material is often used in design, construction, as well as for outdoor and indoor advertising. We can say that absolutely any objects can be decorated with self-adhesive film.

Film for work surfaces

Under constant load and frequent use main work surfaces may fail. It concerns kitchen tables, countertops, as well as furniture in the office.

Important! Tightening with a film will avoid rapid damage, which is the advantage of the material.

Self-adhesive film for furniture

Pasting furniture with a film with your own hands is a rather interesting process:

Using film coating, you can give solidity to the room using texture natural wood or stone.
Film with imitation fabric fit for a more modern target direction.
You can safely use a velor film, which will add some charm and comfort to the room.

Film for children's room

For creating decorative coating walls with children's drawings, such material is perfect. At the same time, at the request of the child, you can easily change it to any drawing you like.

Important! We would like to note that the film coated for drawing will help the child in development without compromising the interior. You can draw on it by erasing previous drawings. Good idea, is not it?

Bath film

Self-adhesive film is perfect for wall decoration, as the material is moisture resistant and prevents the formation of mold.

Important! If you use a mirrored canvas, you can visually expand the space of the bathroom.

Film for doors

Application in this spectrum is widely used to give an expensive effect, as well as for the purpose of benefit:

Such a coating is able to protect the surface from moisture, which is extremely important for wooden doors.
Also, such a canvas is protected from scratches and cracks.
The shades of such coatings are diverse, which will perfectly harmonize with the rest of the range of rooms.

Important! Samo door leaf you can close up with a film imitating wood, and glass - transparent, with the effect of broken glass.

Self-adhesive window film

This material is mainly used for protection against sun rays in room. canvases varying degrees tinting will perfectly cope with this problem.

To protect window sills from crumbling, a dense film with protective coating thus protecting yourself from unplanned expenses. The film is also used in the production window profiles. The most common option is imitation of natural wood. As a result, it looks expensive and is very affordable in terms of money.

Film for glass surfaces

The application of a self-adhesive film will protect fragile surfaces from chipping or complete destruction, as well as increase their resistance to impact. For door inserts and countertops, a film with a stained glass pattern is used.

Important! Such a film can be safely used both in fragments and to create unusual and attractive patterns on the surface according to an individual idea.

The technology of applying self-adhesive film on furniture

Applying such material to any surface is quite simple. You do not need specialists, so you can easily do this simple process. We will reveal all the subtleties of how to properly glue a self-adhesive film on furniture.

How to stick self-adhesive film on furniture?

So, to stick a film, do the following:

Prepare the surface by cleaning it from various pollution, if necessary - cover with a primer or varnish.
Cut the film into strips or curly elements of the desired size.

Important! If possible, it is better to take a canvas with a small margin, in order to avoid a shortage of material.

Next, you need to remove sequentially the lower protective layer, rolling the film over the surface, while slightly stretching.

Important! Irregularities in film application can be corrected immediately after application.

To obtain a quality result, we will introduce you to the main recommendations for each process:

For glass surfaces, use a combination of water and detergent for dish washing. This will remove dust and degrease the surface.
If a wooden surface without lacquering, before application, coat the base with a primer.
When gluing the film, it is necessary to smooth the surface, which will eliminate swelling under the film itself.
When decorating the walls, use wallpaper glue to permanently fix the self-adhesive film.
If it is necessary to paste over round corners, it is necessary to heat the canvas with a hairdryer before application to make it more plastic.

Now you know how to stick a self-adhesive film on furniture in a fairly short time.

How to paste over the cabinet with self-adhesive film?

Self-adhesive film will help in the restoration of your old cabinet. You could say it will give it a second life. How to glue a cabinet with a self-adhesive film quickly, efficiently and be satisfied with the end result?

Despite the simplicity, this work has a number of features. You need attention, accuracy and patience.

For work we need:

Adhesive tape.
Pen or pencil.
Scissors.
Sharp knife.
Roller or squeegee for smoothing the film.
Primer, putty, and sandpaper - for cleaning the surface.

Here are the basic tips for applying self-adhesive film to your favorite but old cabinet:

If there are oily areas of the cabinet, they need to be washed. After that, wash and dry all parts.

Important! We do not recommend scraping off the old cabinet cover with sandpaper, as air will remain in the cracks when sticking the film. If the old coating is peeling or crumbling, naturally, it will have to be removed.

When choosing a film for a cabinet, it is better to give preference to a thinner structure. This will ensure ease of application, as well as a beautiful aesthetic appearance.

Important! The choice of color is up to the owner of the room itself, because only he is the creator of his space. Lots of options: timeless classic, abstraction, positive children's drawings. We want to pay attention to the fact that the film of light tones quickly becomes dirty, and the dark one is more durable. Therefore, dark shades will be most welcome.

Before applying the film, it is advisable to disassemble the cabinet, if possible. This will cover all surfaces and joints with a film, which will hide the color of the former coating.

Important! If the design has handles, shelves, locks, then they must also be removed, and then screwed into place.

It is necessary to glue the film immediately evenly, otherwise it may be skewed, and then, pressing it against the part and rubbing it with a soft cloth to squeeze out the bubbles, it will be difficult to fix something.

Important! Pasting the cabinet, it is necessary to separate the film from the substrate gradually, two to three centimeters.

It is completely worth tightening the holes for handles, bolts, shelves with foil. It can be easily pierced or cut through after work is completed. You can install new handles and locks, thereby giving newness to your favorite cabinet.

Now you know how to glue a cabinet with self-adhesive film. It will not take much time, and the final effect will please you and your guests.

How to wallpaper a closet?

After the repair, do you have wallpaper that is a pity to throw away? We will show you how to use them in your interior. You can glue them over an old closet, thereby dramatically improving it. appearance. You will immediately kill two birds with one stone by decorating slightly worn furniture. For such a process, no special skills are needed, but we will now tell you how to do it.

You must have heard that wallpaper decorates various items interior. Products receive a second life, thereby extending their service life:

A great idea for decorating a closet is to imitate others. finishing materials, wood, brick, leather, stone. Such vinyl wallpapers often remain after various finishes rooms.

Important! We would like to note that such canvases have a significant relief and a frequent pattern, which will help hide defects on the surface of imperfect furniture.

If you have left paper wallpaper, then after gluing it is necessary to apply a couple of layers of varnish on them, which will give a certain gloss and protect the canvas from moisture.

We collect the necessary materials

Before starting work, it is necessary to prepare such tools and materials:

Sandpaper - to prepare the surface for pasting.
Ruler, tape measure, corner - for measuring.
Pen, pencil, marker - for marking lines and borders.
Knife, scissors - for cutting wallpaper.
Primer and putty on wood - to prepare the surface for the sticker.
Roller, brush, spatula - for applying the compositions themselves.
Cloths for smoothing and removing glue.
Wallpaper glue or PVA glue.

As you can see, the list is quite long, but the end result is worth it. Turn on your creative imagination by adding a one-of-a-kind author's contribution.

We start preparatory work

Before wallpapering a cabinet, it is necessary to make the surface suitable for such a process. Therefore, you need to do the following:

The first step is to disassemble the cabinet, remove all accessories from it.
The next step is to sand this surface, thereby removing the entire layer of varnish from it. Sandpaper will help with this, but it will take a lot of time and effort.

Important! You can put a screwdriver or a grinder on a drill with a certain nozzle and then walk along the surface. Helps remove nail polish building hair dryer. To do this, heat the surface and remove the previous protective layer with a spatula. After that, it is necessary to plaster the surface. If your furniture has not been treated with anything, then we recommend using a zero-grain sandpaper for a rough effect.

In the next step, use a damp cloth to remove all dust from sandpaper and give the furniture a little rest.

Important! It is necessary to putty the cabinet if there are irregularities and surface defects. By the way, embossed wallpaper able to hide minor imperfections. Deep defects will have to be leveled with putty using several layers.

You probably know that after the putty has dried, these places need to be leveled with the overall surface of the cabinet. Of course, sandpaper will come to the rescue.
For better adhesion with wallpaper, it remains only to prime this surface.

These preparatory work, undoubtedly, will help you to stick wallpaper on your cabinet with high quality, thereby improving the final result.

pasting

Now let's move on to painting the cabinet itself. So, it goes through several stages:

Before you start, you need to make blanks from the remnants of wallpaper. To do this, the desired surface is carefully measured, the dimensions are transferred to the wallpaper material. Next, cut out the patterns in accordance with the dimensions of the cabinet.
After - glue the prepared surface with glue. When applying glue, try to gradually level the canvas to avoid bevels and the formation of bubbles under the wallpaper itself. Agree, this is not at all difficult to do.

Important! For such work, it is better to use PVA construction glue, as it glues materials better, unlike wallpaper.

We recommend using dry rags to level the canvas and remove excess glue.

to content

Very often you need to add freshness to the interior, you need to refresh the furniture, or extend the life of the new one. But, the lack of finance sometimes becomes an obstacle to the realization of their ideas. You have a question, what to paste over old furniture?

Material advantages and a huge selection

Self-adhesive film for furniture will come to the rescue. Renovating furniture with self-adhesive film is just a great idea. It allows you to quickly, inexpensively repair things dear to your heart. And this material is simply amazing with a wide range of applications. The self-adhesive decorative film for furniture. To find out where to buy a self-adhesive film for furniture, just look at specialized sites on the net. It can be purchased in shops building materials, and you can buy a self-adhesive film in the online store. There you can also specify how to glue the self-adhesive film.

Advantages:

Not affected by high temperature;
Huge spectrum color solutions and invoices;
Various coating options and patterns;
As an addition to self-adhesive, borders and edging are created;
This material is used for functional and aesthetic purposes;
Speed of work with this material;
It does not collect dirt and dust;
The material does not need frequent maintenance;
Perfectly complements the decor;
Long service time.

About types of film

The self-adhesive reflective film for glass and printing on self-adhesive film. It is sold in rolls of different widths.

Self-adhesive film for the kitchen and other models consist of three layers:

Facial;
Adhesive for self-adhesive film;
Protective.

For the manufacture of the surface layer used:

polymer film;
metallized foil;
paper.

For the manufacture of the fixing layer is used:

Rubber;
Acrylic.

To protect the surface of the adhesive, siliconized paper is used, which is removed during operation.

Self-adhesive furniture film is produced according to different technologies. Depending on the equipment used by manufacturers, it is divided into the following types:

molding;
Calendered.

The first type is more convenient for work, it saves its original color, and gives more opportunities for application. This is a heat-resistant self-adhesive film. And you need to stick it only on a flat and smooth base. It fits perfectly on chipboard. And, the fact that the molded material stretches without heat treatments allows it to cover rough, protruding surfaces. It is convenient to repair not only furniture, but also the door. Before pasting the door with self-adhesive film, you need to familiarize yourself with the advantages: it is resistant to shrinkage, the calendered material can “shrink” over time.

Varieties of flowers

Self-adhesive film for children's furniture is very convenient. Due to the fact that it is very popular, manufacturers produce it in many color options. Only one option "under the tree" there are more than seventy different drawings. This ranges from the most standard, classic patterns (for example, "alcantara"), and including the most unusual ones (for example, "Chinese bamboo").

Look very interesting unusual drawings. These are a variety of embossed patterns, marbled, brick-like, leather-like patterns, self-adhesive velvet film, and various motifs on a children's theme. With this material, you can imitate wood, plastic, fabric, foil. A special effect is achieved when a black self-adhesive film is used. Dubninskaya self-adhesive film is also popular.

What materials are used

Use:

for the bathroom;
for finishing furniture;
for finishing working surface in the kitchen or office.
Children's rooms;
when finishing doors;
when finishing windows;
for glass surfaces.

What kind of furniture can this material be used on?

This is a very popular way to decorate and beautify furniture, old doors, freshen up the look of glass, and boring walls. The main advantage is that it is a moisture-resistant self-adhesive film that is perfectly washable.

Before sticking a self-adhesive film on furniture, carefully prepare the base for work. And before updating the kitchen with self-adhesive film, choose one that is not afraid of moisture.

Only in order for all the work to go smoothly, you must know some tricks and secrets of this work. Then you won't make mistakes. And you can paste over the cabinet with a self-adhesive film, a self-adhesive film for a kitchen set, and for other furniture is suitable.

If you take a film for finishing the kitchen or bathroom, then give preference to models that are resistant to moisture.

Criterias of choice

It should immediately be noted high quality, which has oracal self-adhesive film, and German self-adhesive film. When choosing, it is necessary to take into account the criteria for choosing this material:

Quality. This is worth paying attention to in the first place. On the market, self-adhesive for furniture as provided from polyethylene. Its service life is not very long, so opt for a PVC product.
What is the condition of the surface you plan to paste over. If you didn’t ask yourself in advance: “Is it possible to glue on old film? and pasted over old and unstable furniture, various tears and peeling may appear. For such purposes, you should take the material that is produced by the injection method.
Possible damage. On areas that do not have roughness and protrusions, you can use metallized foil. Metallized foil for children's furniture is not suitable. Otherwise, expect scratches and damage.
Consider the future aesthetic appearance. Color, shades, design - this is an individual decision for everyone. But, there are rules that cannot be ignored.

For pasting furniture with a dark color, take a film with a pattern. If gaps appear over time, they will not be so noticeable.

Film application steps

The gluing process itself is not special difficulties. Carefully read the instructions on the protective layer and learn how to apply self-adhesive film.

The work consists of the following stages:

Foundation preparation;
Material fixation.

How to stick self-adhesive film on furniture? Training. Tighten the fasteners that connect the pieces of furniture. Make sure there are no cracks or delaminations. We close all defects with putty, and after drying, grind with sandpaper. After that, you need to degrease.

Furniture covered with self-adhesive film looks very good.

When you paste decorative material, and made some mistake, then until the canvas seized, you can fix everything. If a few hours pass, and everything is attached, then nothing will change.

Dry pasting

How to glue furniture with self-adhesive film correctly? Gluing on the prepared base is carried out in several steps:

Carrying out the necessary measurements;
Cutting pieces of film the right sizes(in this case, plotter cutting of a self-adhesive film is often used).

In the same way, pasting the doors with self-adhesive is also performed.

If you do not know how to stick a self-adhesive film without bubbles, then in the course of work, make sure that there are no creases and air bubbles. Air must be removed with a thin needle.

Wet pasting

At the same time, the film on the chipboard can move, and this is very convenient when you need to correct it so that there are no irregularities. It takes twelve hours to set. Then the furniture pasted over with a self-adhesive film can be operated.

Some tips for working with film:

If it sticks to the base too quickly, then sprinkle it with a little powder. You will have more time to qualitatively connect the picture;
In order for the sheets to adhere well to glass and metal, the base must be slightly wetted. To do this, add a little detergent to the water. Then remove the protective layer, and put the sheet on wet base.

For washing, do not use products that can leave scratches. Do not use them with aggressive substances.

It is cleaned very simply, and it does not matter where it is located: on the door, on the wall, on glass, or on furniture. To care for it, rinse it with water. If the dirt does not come off, then try to remove it with an alcohol solution.

If something went wrong (how to unstick correctly)

If you are bored with the film, then it is not recommended to paint it. Gluing a new layer on the old one is also not the best convenient way. It will have to be removed. How to remove self-adhesive film from furniture:

Before peeling off the self-adhesive film from the furniture, wet the surface hot water, and use a flat and sharp object.
You can try working with a hair dryer. Better fit industrial dryer, or fan heater.
Residues of glue are removed with a solvent, alcohol, or gasoline.

This material is almost universal. With it, you can completely change the house at any time without spending a lot of money. And life will sparkle with new colors. Furniture pasted over with self-adhesive film will become beautiful in a matter of seconds.

With the help of self-adhesive film, you can update the design of any furniture. The properties of the material imply its use for restoration purposes. They can replace cracked laminate and veneer, hide partially or completely damaged facades, completely paste over an old cabinet (table) and give them a different look or enhance performance characteristics. The process of updating furniture with self-adhesive film is simple, but it requires some patience and knowledge of the sequence of how to paste over an old cabinet with self-adhesive film and what tools will be needed.

Pasting the cabinet

The process of updating furniture with a film is simple, but it requires patience and knowledge of how to glue a cabinet and what tools will be needed.

Required tools and materials

To start updating cabinets, in addition to the adhesive web, you will need a number of improvised tools:

ruler or tape measure;
pencil or marker;
scissors, clerical knife;
silicone spatula or dry rag;
a spray bottle with soapy water;

Training

Sticking a polished cabinet with a self-adhesive film begins with surface preparation. From the very beginning, remove all removable fittings. For convenience, you can remove the doors from the hinges.

All furniture should be carefully examined for protruding fasteners, chips and cracks in the coating, since in the future all these defects will appear. It is enough to simply tighten screws and bolts with a screwdriver or wrench, and it will be more difficult to deal with irregularities. You will have to level the surface with putty, and then process it with sandpaper.

After leveling, proceed to cleaning and degreasing with any detergent and ethyl alcohol.

If the cabinet is made of wood, MDF or chipboard without additional coating, you can apply thin layer furniture primer and let it dry.

Pasting the cabinet

When gluing the film, 2 methods are used - wet and dry. The positive outcome of the whole process will depend on the choice of the right one.

It is advisable to use the dry method when processing small areas, applying decorative elements, corner areas or if the surface is uneven.

When dry pasting, you must first separate a small section of the substrate, freeing adhesive base, attach the film to the place of fixing and smooth. Further, as it is glued, the substrate is pulled back, and the sheet is gradually fixed and leveled in parallel with a silicone spatula.

If the question arose of how to properly glue the old cabinet completely and at the same time eliminate the likelihood of wrinkles and other defects, it would be better to use the wet method.

The process consists in gluing the film on a wet base, which will allow you to correct errors immediately in the process.

To moisten the adhesive layer, use a spray gun in the "fog" mode. To do this, the substrate is removed completely. For wetting, a soap solution is prepared from 10 ml of detergent and 1 liter of water. The main rule for wet method- Don't over-moisturize. This greatly slows down bonding and causes the material to slip off.

The prepared canvas is placed on a cabinet and moisture is squeezed out from the center to the edges, while fastening the surfaces. The remaining solution will completely evaporate after 48 hours. A day later, you need to once again process the canvas with a roller.

In the same sequence, we glue all the walls and facades.

What do you do with old furniture?

Poll Options are limited because JavaScript is disabled in your browser.

Unfortunately, good furniture worth good money.

Not everyone has them. Order a kit designer furniture under the kitchen or bedroom, not everyone can afford.

How to make old furniture facades attractive?

How to completely change the appearance of a boring one? How to hide minor bumps and scratches? Furniture wrapping comes to the rescue. It's simple and inexpensive way finishes, with which you can update the appearance of furniture.

For pasting furniture, a self-adhesive film of various configurations is used.

Most often, a multilayer material is used.

It consists of several layers - upper layer- a plastic film with a pattern, below - paper, then - a layer of glue and a detachable base.

The second option is a single-layer film. It consists entirely of patterned plastic, followed immediately by a layer of adhesive and a peelable backing.

The substrate may be different. The most commonly used material is paper-based, sometimes with the addition of plastic fibers. Material with the addition of fibers comes off better, it is stronger and it is easier to stick the film with it.

On the substrate, usually, a metric marking scale is applied - with its help, you can pre-cut the film to the desired one without resorting to measuring with a ruler or tape measure. Finally, the film is usually cut in place with a scalpel, model knife or razor.

The adhesive composition used for gluing may vary depending on the different manufacturers. It adheres well to wood, most types of plastic or paper, has a certain thickness, which allows you to expel "bubbles" from under the film when pasting, which will be discussed later.

The composition is not waterproof - usually when water gets under the adhesive layer, it can lose its adhesive strength.

But after drying, in most cases, strength is restored, if a complete backlog has not occurred.

This property is used for wet gluing.

The material of the top layer of the film is polyester, pvc or polypropylene.

Polypropylene is easier to glue, it is slightly thicker and is able to smooth out small irregularities furniture facade, close minor chips and cracks on the veneer.

Sometimes it is available in a "foamed" version, creating a soft, pleasant film surface, unfortunately not very durable. Polyester more thin material but also more durable. Pasting them is characterized by increased durability and wear resistance.

It is suitable for professional pasting of new or almost new unfinished furniture, . Great option for those who just want to change something in new furniture, but do not want to spend big money on it.

Pasting furniture PVC film the most common. It stands approximately in the middle in terms of properties between polypropylene and polyester, is the most versatile and most often you will find it on sale.

Preparatory operations

The first thing to do when starting to paste furniture with a film with your own hands is to remove all protruding parts and small objects that are possible.

All handles must be removed. decorative elements, moldings, unscrew the metal edges, locks and latches, remove all the wires that were fixed on the surface of the furniture or door that is supposed to be pasted over.

After that, the surface must be thoroughly cleaned of contaminants. It is best to wash it with soapy water and then with water.

Windshield wipers and other alcohol-based fluids can also be used. It is highly undesirable to wash the surface with gasoline, white spirit and other synthetic solvents based on hydrocarbons with a "large" molecule.

They can leave marks on the surface that will not be noticeable, but will react with the adhesive and then the film will fall off. If you have used them, wash with soap and water.

Be careful - too a large number of water on the surface of doors or furniture can cause warping or peeling of the veneer and furniture layer.

After that, it will be necessary to putty all small irregularities and defects in the surface of the furniture. Putty with epoxy putty on wood. Sometimes on sale you can find acrylic putty on wood. It is cheaper, but much less durable.

If the repair estimate is limited, use it. After the surface is puttied, it should be sanded with fine sandpaper flush with the rest of the furniture facade and cleaned with a dry cloth to remove dust.

If you plan to use glossy and especially mirror film- you need to align the facades so that the reflection in them is correct, without distortion.

To do this, the surface of each furniture facade is carefully checked according to the ruler-rule, and the surface is puttied.

Only epoxy putty is used - acrylic, in this case, when the facade is completely leveled, it will lag behind, it is more suitable for repairing scratches and potholes.

You should also pay attention to the fact that all the doors in the common furniture facade were in one straight line and hung straight. Otherwise, it will be noticeable on a glossy film. Align the doors by adjusting the hinges.

After the preparation is completed, proceed to cutting the film. It is convenient to mark each detail on the facade with a certain number directly on. Use a graphite pencil, not too soft - the film will hide the marks with it.

But it is better not to use markers - they are able to show through the surface of the film. Also put vertical arrows, so that later you can check the direction of the glued film.

From a roll of film, the details of pasting are cut out. They should be slightly larger than the surfaces to be glued, so that you can then cut exactly to size. Pasting details are also marked with numbers with back side on the tear-off surface - they must match those placed on the facades themselves.

If there is a drawing, arrows are noted that coincide with those that were placed on the details of the furniture facade. It is undesirable to put horizontal arrows - they will be located oppositely when the film is turned over, and you can get confused. Set .

In some cases, it is required to adjust the pattern on individual parts of the facade - for example, when sticking a film with one picture on two doors. Here, the cutting of the junction is done exactly along the border, and the sticker is performed with great care.

If it is planned to make the pasting details in such a way as to cover with a film not only the plane of the facade, but also cover the ends of the doors with one piece, just cut out the pieces wider so that there is guaranteed enough for gluing the ends, and there is also a little margin left to compensate for the error.

Then make cutouts in place. After that, carefully fold all the cut out parts in the order in which you are going to glue. Left to take right tool and start the process.

Pasting furniture - two ways. Proper pasting technology

There are two ways of pasting with a self-adhesive film - dry and wet.

Both methods are correct, dry - does not forgive mistakes, and wet - may not work with the film of some manufacturers that use a specific adhesive.

If you apply wet version- first try it on a small piece of self-adhesive film.

In the dry method, a sheet of film is first applied to the surface to be glued, then fixed with adhesive tape so that it hangs freely.

They check that the drawing on the film is exactly as intended, and the lines of the drawing are joined with the sheets that you have pasted or are going to stick on. For example, so that the lines of "boards" on the film under the tree on different doors kitchen cabinets were parallel.

Gradually tear off the backing and stick the film, smoothing it with a wallpaper wing or a clean foam sponge. Do not rush - tear off the substrate small areas 10-15 cm wide, carefully smooth the film.

Thus, you will glue the entire sheet to the facade part. Check if everything is correct. If it is wrong, you will have to delete everything and cut out a new sheet, repeat the procedure.

The wet method differs from the dry method in that before gluing the film to the surface of the furniture, water is sprayed onto the furniture from a spray bottle. Add a small amount of soap to the water.

The fact is that water under a layer of glue allows not only to expel “bubbles” from under the film with a winglet, but even to shift the entire film a little to the side if the sticker was applied incorrectly.

This is very convenient, but it will take a little longer and will not work with all types of film.

After 20-30 minutes, the water will be absorbed into the glue and the surface of the furniture, and the film will remain glued tightly, it will no longer be possible to move it.

Design and household tricks - the right choice of material for work

In conclusion, I would like to give a few useful tips, which will help you choose the right film and stick it with high quality, even if you do not have enough experience in painting:

Choose a film without a pattern or with no lines and direction. The most difficult thing is to stick the film, especially if you need to join several surfaces into one pattern. A little simpler - a film with a "checkered" pattern. Even easier - drawing in the form of vertical lines. And the simplest thing is to glue a film with a pattern “under granite”, “under sandstone” or another with a similar pattern.
Don't be lazy to spend time on . The more time you spend on preparation, the more carefully you cut out the blanks, more accurately mark everything and lay it out in right order- the easier it will be to work. Also, do not be lazy to spend time preparing the workplace and some money to buy a good tool.
In big narrow rooms with windows on north side buy furniture film light shades- light green, yellow, gray-white, blue color etc. In well-lit rooms - film Brown, gray, dark blue and similar shades.
If you buy a film for furniture in the kitchen - do not take white or with white areas. Take some gray, interspersed with yellow or red spots.
If you not professional painter- Do not take glossy film and especially mirror. Spend a lot of time on high-quality pasting to her, many unsuccessful attempts will be made, and it is not a fact that the result will please the eye.
Don't skimp on scraps. If you “cut” the film too tightly to the size of the furniture parts, then, in case of an error, it may not be enough to completely cover the facade and you will have to throw out and cut the entire sheet, or even two, again. In the end - none.
Before buying, roughly estimate which piece of furniture will be the largest. Buy a film wide enough to cover this largest part entirely, and you don't have to join the film from several pieces, skillfully masking the joints. For example, when pasting a door 90 cm wide, do not use a 70 cm wide film - take a meter one.
You can easily get a set of furniture for an empty kitchen in a new building by simply buying furniture that is not too old from your hands, and then paste over it with a film. Furniture is sold very inexpensively from hands - several times cheaper than in furniture store. By the way, in this way you can update not only the furniture in the kitchen, but also interior
On the surface of the tables you can stick a special protective film, which has increased strength and wear resistance.

On the video you can see the process of pasting furniture:

Self-adhesive film is versatile material which allows you to quickly and without special costs transform any furniture set. The process of gluing with such a film is quite simple, however, you need to know how to glue furniture with a self-adhesive film correctly and what material to choose for this.

This material is made on the basis of a combination of wallpaper and adhesive tape. Self-adhesive film can be pasted over not only furniture, but also the surface of walls, ceilings or some elements of the car. In this case, for each you need to use a certain type of film.

Material Features

Using self-adhesive film, you can realize the most versatile and original design ideas, which becomes possible due to the advantages of this material:

moisture resistance;
resistance to high temperatures (does not melt at temperatures up to 80 degrees);
a wide range of colors, textures and patterns;
inexpensive price;
the convenience of use;
ease of care.

In addition, the features of the film also include the possibility of gluing it to almost any surface. Therefore, you can glue not only wooden furniture, but also furniture made of plastic, plywood, glass or metal. The only difficulty that can prevent you from quickly transforming furniture may arise due to the uneven surface of the object chosen for pasting. Therefore, first you need to get rid of all the defects, especially if the furniture is old. It may have roughness or pits that can be processed grinder or fine sandpaper. If this is not done, then self-adhesive film may flake off or blister in places of irregularities.

The gluing process cannot be called complicated, it does not require skills or practice. The only thing you need is time, and if you need to paste complex surface, then the helper. You will also need the following tools:

ruler;
marker or pen;
sharp knife or scissors;
putty knife;
industrial dryer.

An industrial hair dryer is necessary in order to thoroughly dry the surface of the furniture, as well as the already pasted film, before gluing.

What kind of furniture can be glued with self-adhesive film?

Self-adhesive film for furniture is moisture resistant, not affected by temperature and is different simple care. Thanks to these qualities, it can be used to decorate furniture in different rooms:

for pasting a kitchen set. Refresh kitchen set quickly and without special efforts self-adhesive film for furniture will help, which you can buy at an inexpensive cost. Such a film kitchen furniture will become an avid assistant in maintaining cleanliness and order. The surface of kitchen furniture is constantly dirty, and this can be fixed with a self-adhesive film;
for pasting furniture in the toilet and bathroom. Due to the fact that this material is not afraid of water and moisture, the furniture in these rooms can last longer. And at the same time, the film will help create original design, which, if desired, can be easily changed over time;
for pasting furniture in . Children, as a rule, love to draw, and they do it wherever they can. Including the impact takes on the furniture in the nursery. However, if you glue it with a self-adhesive film, then as a result, any pattern can either be wiped off, or the film can be re-glued, or left as it is if desired. In addition, children love everything bright and interesting, and with the help of such a film, even the most ordinary children's furniture can be transformed beyond recognition;
for pasting furniture in the living room, hallway or bedroom. Decorative self-adhesive furniture film is perfect for these rooms, as you can always choose the necessary texture and color of the film so that it blends harmoniously into the general premises.

When pasting furniture items - chairs, cabinets, the surface of tables or chests of drawers, for each you can choose a film that is suitable in color and texture, which will help refresh the interior and design of any room. Below you can see how the self-adhesive film for furniture photo looks like.

An important point: when choosing a film, you need to consider what type of furniture surface it will be glued to. For example, if the furniture is antique, then a transparent film is best suited for its decoration, with which you can hide scuffs and small scratches, while not changing the color of the old tree. It will be good on glass, a film with a mosaic pattern will look good.

Self-adhesive film is easy to care for. To maintain the good appearance of the furniture, it is enough just to wipe the film with a detergent. It is better not to use powder products, as they can damage the structure. In case of severe contamination, ethyl alcohol can be used.

How to glue self-adhesive film on furniture: surface preparation

Before you start gluing furniture, you need to carefully prepare the surface so that the film sticks well and air bubbles do not form. Initial stages:

any surface, whether it be a table, a chest of drawers or a cabinet, must first be thoroughly cleaned and degreased with alcohol. The most suitable film for gluing is smooth surface on which there is a coating of varnish. In the event that the surface is rough, you must first cover it yourself furniture varnish and leave to dry for two days;
further on the surface of chipboard, plywood or wood, you need to remove dust and protruding particles of material. Using fine sandpaper, carefully rub the surface. You can even use acrylic primer, as it will contribute to the reliable adhesion of the film to the surface;
if the selected piece of furniture has metal parts, which also need to be sealed, then such parts should be pre-moistened;
after preparing the surface, cut the self-adhesive film into the necessary parts. This will help the network reverse side material, which is lined by centimeters. On the grid you need to mark up, making a small margin, and cut with sharp scissors or a knife.

Stages of gluing a self-adhesive film

When purchasing such material, an instruction is always attached to it, in which there is a description of the process of gluing to a specific material. In fact, there is nothing difficult in gluing a film and even an inexperienced person can do it. However, you need to age carefully to perform gluing so that the finish does not look awkward later. Stages of finishing furniture with self-adhesive film:

the prepared film must be separated from the paper by a few centimeters. Next, you should attach it to the surface with the sticky side so that it matches the size of the surface;
then you need to carefully separate the film from the paper part and stick it evenly over the surface. Smoothing the film should start from the center. To do this, you can use a dry sponge. It is necessary to smooth out in the same way as during, so that air blisters do not form;
in the event that a mistake was made during gluing, it must be redone immediately, because if a little time passes, then the film can no longer be removed.

It is worth paying attention if the acquired film sets to the surface instantly, because then it will be extremely inconvenient to glue it. In order to slow down gluing, you can use powder or talcum powder, lightly applying it to the surface of the furniture. If in the process it was not possible to avoid the formation of air bubbles, then you can get rid of them with a needle. Blisters need to be pierced and smoothed out.

How to remove self-adhesive film from furniture

After a while, everyone can get bored with the color or pattern of the film that is pasted on the furniture in the kitchen or living room. However, not everyone knows how to properly remove the film, so as not to spoil the surface of the furniture. Self-adhesive film is quite durable material, which is so popular because of its aesthetics and durability. Therefore, to remove the film, it is necessary to take special measures. There are several ways to remove film:

You can remove the self-adhesive film with hot water. It is necessary to wet the film well. Then, with a thin spatula, carefully remove the material so as not to spoil the surface of the furniture;
if hot water did not help and the film is still not removed, you can use a hairdryer. In order for the adhesive to lag behind the surface, it must be warmed up well. For this, both an ordinary hair dryer and an industrial one are suitable;
Another way is to use a heater. You can use a regular home heater that blows hot air. To do this, you need to set it to full power and direct it to the glued film. Thus, it will heat up, after which it can be easily removed;
if a little glue from the film remains on the surface, then this does not matter. It can be easily removed with a little solvent.

The self-adhesive film is universal view material, thanks to which you can completely change the design of any furniture, without making any special efforts and high costs. This durable material will bring new colors to the design and interior of any home.

Video how to glue kitchen furniture with self-adhesive film

Categories

Popular