How to make a bedside table with your own hands. How to make a narrow bedside coffee table with your own hands. Video - Bedside table

Bedside table - unpretentious, but so required item furniture in every bedroom. Otherwise, you will have to get out of bed before going to bed to put away a book, glasses or TV remote. And this is usually not what you want to do, sitting comfortably sweat warm blanket. In addition, lamps are usually placed on the bedside table.

Meanwhile, making such a table with your own hands is surprisingly simple.

What you need

Pine bars square section(7:7 cm), plywood 10-15 mm, pine slats 7-10 cm wide, self-tapping screws, electric jigsaw, screwdriver, PVA glue, stain and wood varnish.

Progress

It is necessary to cut 8 legs of the same height from a pine block of square section (based on 2 bedside tables). On top of the bars, we attach plywood pads to the PVA glue and self-tapping screws, which are smaller in width than the bars by the thickness of the planks (battens).

We connect the bars in pairs from above with pine slats using PVA glue and self-tapping screws.

We tie the pairs together with the same slats.

From above, on the frame of the table, we fasten the countertop-composite board made of boards, prepared earlier. In principle, everything, the table is ready.

It remains to cover it with wood stain and several layers of varnish.

Please rate this post:

Without a bedside table near the bed, you can’t imagine a bedroom, and you can do it yourself.

However, if we talk about factory products, then here you can often notice typical forms, of course, they differ significantly from each other, but only in the quality of the material and assembly.

But what if you still had the idea to make an original bedside table yourself? In this case, it is important to immediately verify the correctness of the decision. In the end, “it’s not the gods who burn the pots,” just a few professional advice and your idea will be realized, because the scale of production of the cabinet is small and it will be easy for even a beginner to handle it.

As a basis, you can take any example you like from the Internet, or completely reproduce all the assembly steps according to existing schemes, and not experience problems with creative imagination.

Master's advice: as a source material it is better to choose furniture pine shield, as more suitable for convenient sawing at home. This is the most environmentally friendly material. Natural beauty The texture of such a tree will organically fit into any bedroom. If you have the possibility of sawing in the workshop, then it is practical to choose chipboard, that is, laminated chipboard. In this case, you will have access to almost the entire palette of colors and shades of the most valuable types of wood.

In contact with

Classmates

Design is the basis of style

To begin with, it would be good to get acquainted with popular trends in the furniture industry. Still in fashion are styles such as:

  • retro;
  • rustic;
  • Asiatic.

All this variety can confuse you, but do not worry: you will initially be given a model from a classic style tree as an example.

So, what is a classic cabinet? It is reasonable to note that it will always have right angles and fixed support. Its main functionality is one or more drawers, or one section with hinged door on gas lift.

Alternatively, in addition to the countertop itself, there may be a through open additional shelf, for example, as in the photo.

Minimalism style implies the absence of anything complicated, as a rule, such a cabinet has several shelves and legs.


Rustic differs from all others in its rough surface, which has colors different kind natural objects. To achieve the goal, you can use the same wooden base and suitable paint mixed with stone chips.

Asian style carries elements of national culture different peoples and, of course, includes carving or curved forms of the main elements of the cabinet (doors and legs).

Adherents of the traditions of different eras will like a homemade retro cabinet. The style itself is very conditional, since it can be understood as many directions of times in a historical context. However, the first thing that comes to mind is the popular forms of furniture elements of the 20s, and the other decades of the past following it, mainly the 20th century.


Alternatively, it is possible to complete it on the basis of an old cabinet by inhaling an element of a new one into it. decoration- or shabby chic.

Wooden tube making guide

All you need to have for the production of work is:

  • clearly verified drawings of the details of the bedside table, from which furniture will subsequently be assembled;
  • a set of self-tapping screws and tools (electric jigsaw, hammer, screwdriver and measuring instruments);
  • necessary fittings (two hanging hinges, magnets, gas lift and decorative door handle).

Take note: in pursuit of exquisite beauty, do not use too bulky canopies, as well as hinges made of nickel-plated plastic. They have a very short lifespan. It is better to use ordinary metal canopies covered with gold patina, bronze or silver.

Homemade manufacturing includes the following workflow:

  1. You will need to cut out five elements for the walls, shelves and the countertop itself. Using patterns from fiberboard or thick cardboard, you need to cut out the elements of the cabinet with a jigsaw furniture board thickness 16-22 mm. Usually, standard width fluctuates between 30-40 cm.
  2. We cut out or use ready-made bars for the legs of the cabinet with a section of 35 x 50 mm and trim them along the length according to the drawing.
  3. We make the facade of the door (you can also buy it in the store and adjust the entire project to its dimensions).
  4. Using self-tapping screws, we assemble the elements of the cube and the countertop using the legs (to hide the heads of the screws, use the plugs for the color of wood you need).
  5. It is better to have the back side of the cabinet closed tightly, so use the trimmed fiberboard.
  6. According to the pre-planned grooves in the door and the cube of the cabinet, hang the hinges.
  7. Sand the corners, legs and faces of the cabinet and countertop.
  8. Coat the outside of the cabinet with varnish.

That's all, the work is done - you can place the finished furniture in the bedroom.

Suggest for viewing video instruction for the manufacture of bedside tables in the bedroom:

In contact with

See inaccuracies, incomplete or incorrect information? Do you know how to make an article better?

Would you like to suggest photos for publication on a topic?

Please help us make the site better! Leave a message and your contacts in the comments - we will contact you and together we will make the publication better!

You will need

  • - wooden plank
  • - construction cardboard pipe with a diameter of approximately 20 cm
  • - hacksaw (jigsaw)
  • - self-tapping screws with a round head
  • - vinyl tapes(you can replace them with textile ribbons) 5 cm wide and 90 cm long - 24 pieces
  • - furniture nails(for more simple option- push pins) - 48 pcs
  • - building tape
  • - paper clip

Instruction

Using a hacksaw, cut off the size we need cardboard tube. Considering that it should be slightly higher than the bed, we need a piece about 60 cm long. To cut it evenly, mark it first, otherwise the tabletop will stand crooked.

We cut a tabletop with a diameter of 60 cm from a tree.
To draw even circle, use a bar with nails driven in at the edges, the distance between which is 30 cm; place one nail in the center of the future circle and, scrolling the bar with the second nail, scratch the circle on the board.
Then we cut out the countertop, carefully grind the edges.
We draw another small circle in the center with a pencil on the table top, equal to the inner diameter of our cardboard tube and nail 4 small wooden dies.
We cut out the lower base of the table from plywood with a radius of 45 cm. We also attach 4 wooden dies to it.

We fasten the pipe with the tabletop and the lower base using self-tapping screws in the places where the dies are located.
We cover the design with paint.

Gather all the ribbons together at approximately the middle of the table, wrap the ribbon around them like a belt, and secure temporarily with a paper clip.

Bedroom- a specific place in the house where the atmosphere of peace is important. Everyone equips their personal space to their liking, but it is important to focus on the design style and functionality of the furniture. Bedside table for bedrooms refers to small forms, but interior design depends on its appearance. Near the bed there must be a place where they put a vase, a table lamp, a laptop, a mobile phone.

The bedside table for bedrooms belongs to small forms, but interior design depends on its appearance.

Getting into bed, many are forced to look for a place next to them where they can attach a tablet with charger, glasses, book. It is difficult to do without a small free plane at hand. In addition to the purpose justifying its name, coffee table or bedside table are used for different purposes. Put here:

  • fresh bouquet of flowers;

table in the lounge for various things

  • morning cosmetics (to put yourself in order after washing);
  • a cup of aromatic coffee brought by the "soulmate";
  • nice gift or souvenir, etc.

bedside table in light room

If nothing is placed on the bedside table, but used as needed, it will great decoration bedrooms. For the same purpose, several varieties of small forms of furniture are used. They will harmoniously complement the interior of the living space:

  • nightstand;
  • bench;

bedroom table wall mounted

  • pouffe-type table-turner;
  • stool of an unusual shape;
  • a shelf attached to the bed;
  • stand for a laptop;
  • food shelf;
  • coffee table;
  • statuette pedestal;
  • console on low legs;

table next to the bed with original furniture

  • floor lamp with shelf;
  • shelf for fixed and mobile phones;
  • folding shelf near the closet, bed or sofa;
  • a small "transformer" or block of modular furniture;
  • a wooden cube or other homemade product;
  • any other item adapted for a bedside table.

Green bedside table

Sometimes it is necessary to keep on hand medicines taken in bed at regular intervals in order to care for the sick. Which to choose bedside table for bedroom, largely depends on its functionality, aesthetics and interior style. Dimensions must match the dimensions of the room. AT narrow room you have to be content with one shelf under a wall sconce or window sill.

light bedside table in a room with a large window

Structurally, bedside tables and cabinets are produced mobile on wheels (mobile) and fixed (stationary). Less common are folding countertops (integrable) and transformable stands.

With good fantasy small furniture used to replace desk or dressing table. An oval mirror on the wall with an elegant console is a fashionable solution that replaced the obsolete trellis (or dressing table) and a cosmetic table. Trolleys and add-on modules for breakfast in bed are in demand.

Stylish dining room tables in black and white

This is interesting: In the early twentieth century, the British and French read fresh periodicals in the morning over a cup of tea or coffee. So the "coffee" table, which was considered chic among aristocrats long before the advent of newspapers, became a "magazine". And the newspaper used to be called “le journal” in French. Later, magazines were called multi-page periodicals, and newspapers - an edition of 2-4 pages. The fashion for coffee tables replaced bulky chests of drawers and bedside tables, they were used in hospitals and hospitals. In the second half of the 20th century, cabinets became fashionable in furniture as TV stands.

table for storing various things in the bedroom

Designers of furniture companies and interior designers periodically offer new solutions that combine "two in one". They are used in the interior as bedside tables or pedestals for bedrooms. Most popular today:

  • safe table;

antique safe in wood processing as a bedside table

  • floor lamp with shelf;
  • showcase table;
  • candlestick type table;
  • mirror table-console;
  • trolley table on wheels;

movable bedside tables

  • a tray with legs (for coffee in bed);
  • a small rack with a folding plane;
  • sculpture table with glass top.

table in the rest room in an unusual and modern style

Attention: For an exquisite women's bedroom, it is worth purchasing glass table with a sculpture that looks like a real art object in regular room. Eminent designers have offered exquisite products for a long time, but they are still at the peak of popularity among lovers of beautiful gizmos.

The choice of interior design style largely determines the appearance of furniture for bedrooms and other rooms.

one of the many options for trendy bedside tables

  1. Even those who do not understand this issue are unlikely to confuse a classic nightstand with an avant-garde coffee table made of plastic pipes for techno style.
  2. For English classics and conservatism pick up wooden bedside tables with wooden facade reminiscent of old bureaus on high carved legs.
  3. In the glamorous bedroom of a society lady, an exquisite bedside table with mirrors, rhinestones or gilded carvings is selected.
  4. Neoclassicism favors the classics in a new rethinking, for example, a console under a mirror will replace a mirrored dressing table.
  5. For bedrooms in historical style, expensive luxury imported furniture is purchased. Such models cannot be confused with anything - they are elegant and noble, they look expensive. Luxurious apartments will be complemented by a white or light bedside table (cabinet) with wood carvings in the Baroque, Rococo or Renaissance style.

Bedside table (pedestal) with carvings in baroque, rococo or renaissance style

Young people prefer styles:

  • techno;
  • high tech;
  • loft;
  • avant-garde;

light bedside table (cabinet) with two pull-out compartments for things

  • futurism;
  • urbanism.

For such interiors use plastic, chrome pipes, fabrics made of metallic threads, attributes of urbanization with unexpected constructive solution. Instead of a bedside table, there is a luminous panel hanging on chains from the wall. An unexpected decision as homemade furniture- even better.

a table with a monitor stand for your convenience in the rest room

Recycled furniture is popular - connected 2-3 "bald" tires from cars, painted spray paint. original furniture complement with a worktop made of metal, glass or laminated chipboard.

The minimalist style rejects excess furniture, using the bare necessities. Here it is enough to confine ourselves to a folding tabletop, a glass cart on wheels, which is easy to roll with breakfast from the stove and return to the kitchen.

Original furniture is complemented with a worktop made of metal, glass or laminated chipboard.

Modern style allows new materials and originality of forms. If you manage to find something very original on sale, you should make yourself such a gift. It can be a "smart" bedside table with electronics that moves on command from the remote control.

wall-mounted bedside table with shelves

There are more original solutions, such as a luminous cube - a floor lamp that changes color over time and as it heats up. It is also used as pedestals bedside for bedrooms.

For a fusion-style room, beds are often chosen that look more like a sofa - with eco-leather trim with a classic rhombus pick, it looks amazing.

Bedside table in 18th century style

In the interior, the sofa bed is complemented by round or square banquettes, made in the same way. Even better - genuine leather upholstery.

The Art Nouveau bedroom looks especially luxurious, and it is important to choose a table in exact accordance with the rest of the furniture. The headboard and bed frame are often made forged, with a “whip stroke” characteristic of the style, and the table should be the same in design.

The headboard and bed frame are often made of wrought iron, with a “whip stroke” characteristic of the style.

Ethnic styles welcome small-form products with hand-painted facades. Real masterpieces are sometimes exhibited in antique shops.

Even if your room for sleeping and relaxing does not have a specific stylistic solution, it is always obvious from the furniture what is preferred. The conclusion suggests itself: what kind of bed, such a table, taking into account the style and functionality.

bedside table with panoramic window and minimal furniture

Often a multifunctional product such as bedside table nowhere to put in the bedroom. If there is no space to the right and left of the bed ( folding sofa), there is always some free space. Then it does not matter where the cabinet will stand in bedside area small room.

If you have to choose between a bedside table and a floor lamp, try to find a two-in-one model.

The most common approach is mirror wall and glossy stretch ceiling They visually expand the room. It is better to use a classic coffee table on wheels, which “walks by itself” around the bedroom. If in small bedroom a sofa bed is used, then it will often have to be moved, then the wheels of any furniture are indispensable.

Tip: If there were no movable elements at the table or cabinet, the wheels (rollers) are purchased in furniture store. This will provide the mobility feature.

miniature bedroom table with drawer

Instead of a bedside table, when there is no other solution, use hanging shelves, but instead table lamp- bra. The main thing is that they be at a safe distance and made of materials that cannot harm a sleepy person getting out of bed. Children and adolescents sometimes fall out of bed in a dream, then it is better to refuse the table, and buy a sofa bed with shelves on the rails or with a side.

Attention: Safety is a mandatory requirement for all bedside items without exception!

If you have to choose between a bedside table and a floor lamp, try to find a two-in-one model. original lamps with a bookshelf appear on sale quite often.

If you approach this issue creatively, it is easy to make the bedroom original and comfortable.

An ordinary chair, where clothes are habitually hung before going to bed, can also be used as bedside furniture, especially if the chair is compact, with a small crossbar instead of a back. Very popular with young people and business people enjoy folding laptop stands. They come in a variety of styles and designs. This item is an opportunity to show talents and make a convenient and compact replacement for a traditional cabinet or a compact table for your bedroom with your own hands.

comfortable bedside table with a pull-out tray for dishes in the bedroom

Designers periodically offer extravagant solutions - instead of a table, put a grandmother's chest, a case or a suitcase, a drum or an easel. But this is a solution for the bohemian elite. If you approach this issue creatively, it is easy to make the bedroom original and comfortable.

BED TABLES, DRESSERS AND TABLE TABLES

Bedside table for the bedroom 43 photo ideas:

A bedside table is a simple yet essential piece of furniture in any bedroom. Otherwise, you will have to get out of bed before going to bed to put away a book, glasses or TV remote. And this is usually not what you want to do, cozying up with a sweat warm blanket. In addition, lamps are usually placed on the bedside table.

Meanwhile, making such a table with your own hands is surprisingly simple.

What you need

Pine bars of square section (7:7 cm), plywood 10-15 mm, pine slats 7-10 cm wide, self-tapping screws, electric jigsaw, screwdriver, PVA glue, stain and wood varnish.

Progress

It is necessary to cut 8 legs of the same height from a pine block of square section (based on 2 bedside tables). On top of the bars, we attach plywood pads to the PVA glue and self-tapping screws, which are smaller in width than the bars by the thickness of the planks (battens).

We connect the bars in pairs from above with pine slats using PVA glue and self-tapping screws.

We tie the pairs together with the same slats.

From above, on the frame of the table, we fasten the countertop-composite board made of boards, prepared earlier. In principle, everything, the table is ready.

It remains to cover it with wood stain and several layers of varnish.