The best options for planning a corner kitchen. Narrow kitchen design: rid the room of tunnel syndrome

For correct layout keep in mind that any placement of kitchen modules should be based on the triangle rule:

• Cooking area (work table).
• Cooking zone (stove).
• Wash zone.

All three zones should be at a minimum distance from each other, but not less than 120 cm. The most common case in modern houses- direct kitchens. The triangle here is extended into a straight line and all three zones are on the same line.

This location option is suitable for both a single person and a family of several people. Thanks to the arrangement of numerous drawers for storage under and above the work surface, straight kitchens turn into comfortable and convenient workplaces for housewives who love culinary delights.

Important point: straight kitchens should not be stretched too far. Otherwise, the cooking process will turn into endless running from one working area to another. Everything should be at a short distance - sink - desktop - stove. But so that the spray from the sink does not reach the hot stove. It is desirable to place the refrigerator on the other side and also at an accessible distance.

Similar placement kitchen furniture helps to save energy when working in the kitchen and enjoy cooking your favorite dishes. As a result, both your family and guests will be satisfied. After all, food prepared with pleasure is always tasty and appetizing.

corner

For medium and small spaces, corner kitchens- most best option to create a comfortable and practical work space. Furniture modules form an L - shaped corner, which allows the best way organize a work triangle ( hob- cutting table - sink).

The presence of hanging cabinets and drawers under the work surface on the sides right angle allows the hostess to save energy and not make long transitions around the kitchen in search of the necessary utensils. Corner kitchens allow you to get by with one step or just get the right thing with your hand outstretched. Which is very convenient for the hostess, who has to spend a lot of time in the kitchen.

To date, when furniture stores offer in abundance buy custom kitchen cheap, corner ones are especially in demand. This is quite due to the compactness and ergonomics of this design. After all, the combination of a corner sink and a well-chosen headset allows you to use every centimeter of the working space with benefit.

When planning, it should be taken into account that corner kitchens connect the vertices of the working triangle as much as possible. The sink, cutting table and stove are very close. Therefore, when arranging furniture, it is necessary to observe minimum distance between them - 120 centimeters, so that splashes of water do not fall on a hot stove.

Deciding buy a custom-made corner kitchen, you should pay attention to long floor kitchen cabinets. Picking up additional modules to the headset you like, you can use them on the side - to store everything you need in the kitchen. The choice of modern furniture stores offer almost unlimited. Therefore, you can quite compose a thoughtful and stylish interior your kitchen.

double row

A two-row kitchen (parallel) is the most suitable option a kitchen set for an oblong-shaped room or a variant of a walk-through room. In this case, all furniture modules are located on two sides. As a rule, on one side there is a working triangle (cooking stove - desktop - sink), and on the other side there is a refrigerator and cabinets for storing kitchen supplies and utensils.

The triangle here extends into one line and therefore it is worth calculating the minimum (120 cm) and maximum (180 cm) distance between each zone. This will make working in a two-row kitchen comfortable and enjoyable. Besides, kitchen layout must take into account the distance between the doors of open wall cabinets on opposite sides. It must be at least 50 cm.

The layout of a kitchen of this design requires a special approach to choosing a kitchen set. The presence of two sides allows you to choose a headset with large quantity furniture modules. And also a sufficiently large working surface is formed on both sides. This allows two people to work simultaneously without interfering with each other. At the same time, there are no problems with the arrangement of household appliances - food processor, coffee maker and others useful devices you can not put them in cabinets, where they are too lazy to get them. Everything is in an accessible state.

Parallel layout is convenient - in order to get required item from the opposite wall, it is enough to turn 180 ° and take a step. This significantly reduces the number of unnecessary movements in the process of preparing dinner. The arrangement of the dining area is preferable on the sides of the kitchen unit.

Double row layout allows you to equip even such seemingly complex rooms. Thanks to thoughtful design and good selection kitchen furniture, you can quite cope with the arrangement of elongated or walk-through rooms.

Island

A kitchen with an island is a fashion trend of the last decades in the design of kitchen furniture. By constructive solution they are a combination of angular or P - figurative cuisine with a separate furniture module in the center of the room.

Such placement of a furniture set requires a lot of space, therefore island kitchens suitable only for large apartments or private houses where there are spacious rooms. In addition, a distance of at least 180 cm must remain between the island and the main set, for the free passage of two people. All this requires sufficient square meters. Therefore, a kitchen with an island is spacious and large.

The arrangement of the island itself depends only on you and your capabilities. island kitchens allow you to equip the working triangle (hob - sink - desktop) different ways. But it should be noted that if you plan to make a stove or sink, refrigerator or oven on the island, then this entails additional troubles. You will need to bring communications to it:

• Plumbing system.
• Make additional electrical wiring.
• Equip an additional hood over this part of the kitchen.

In this case kitchen with island it also requires a special lighting layout - after all, the central place here is occupied by the hood.

If you decide to make a dining table on a remote furniture module, then you should consider that it will be higher than ordinary tables. Its height is the same as the working surface of the entire headset - from 70-76 cm. The problem can be solved by purchasing bar stools with high seats.

U-shaped

U-shaped kitchens one of the most popular layouts kitchen space. In this option, the placement of kitchen furniture occurs on three sides of the room. Depending on the available space, three layout options are possible.

Option large kitchen. This is the perfect case if you want to combine a kitchen with a dining or living room. U-shaped kitchens allow you to separate working area for cooking from the living area using one of the sides of the kitchen set. But there is a danger of stretching the sides of the working triangle (washing - working table-stove). Optimal distance from one vertex of the triangle to another, a distance of 1200-1800 mm is considered. If this limit is exceeded, there is a danger of quickly accumulating fatigue while preparing dinner for the whole family.

Medium room option. U-shaped kitchens, placed on medium-sized areas, allow you to arrange the optimal working triangle. At the same time, highlighting one side of the kitchen for eating.

U-shaped kitchens in "Khrushchev". With such a layout in houses built in the 1960s, only a cooking zone and a place for snacks for one, maximum two people are obtained. But, thanks to small kitchen sets with all kinds of cabinets and compartments, it turns out to be very functional. workplace. It is preferable for a family to dine in the living room, equipping a place for a dining room.

With all placement options, there is always an opportunity for the beneficial use of windows in kitchen design. As a rule, housewives prefer to equip a cooking or washing area in front of it in order to get a little distraction from routine work. In Khrushchev, you can make a good place to have a snack or relax near the window. The final version, as a rule, happens after the purchase of the headset.

peninsular

peninsular cuisine- this is a combination of any of the known layouts of kitchen sets with an additional ledge on one of the sides (the exception is parallel layout). As a rule, this space division technique is used to distinguish between the dining and working areas.

A bar counter for the kitchen, an oblong dining table or a furniture module with a working area can act as a peninsula. in the USA and European countries usually equipped here work surface along with the dining table, preferring to enjoy watching culinary manipulations. Photos of the kitchen with a bar counter help to choose a similar option. And the very process of getting dishes “straight from the heat” creates a special mood in the kitchen.

The most ergonomic dimensions of the “protrusion” are 120 × 120 cm and the height is no higher than bar counter for kitchen. Otherwise, the impression of a cluttered space is created. In addition, this layout is only suitable for rooms of medium and large volume. If you do not want to bother with additional water supply, gas and additional exhaust, then the best thing is to equip a dining table on the “ledge”. Which is very convenient for the hostess in the process of setting the table for the whole family.

Under the surface dining table usually place cabinets for storing kitchen and other utensils or equip freezer. If you chose the option " bar counter for the kitchen”, then in this case it is preferable to equip shelves under the surface of the rack for storing the kitchen service and all the utensils necessary for table setting. To select options, there are entire directories containing photo of kitchen with breakfast bar.

It should be recalled that this layout implies the presence of a room of large square and volume. With proper placement and thoughtful color solution, you will become the owner of a comfortable and beautiful kitchen.

Comfortable corner

Most kitchen furniture customers prefer corner or, in other words, L-shaped headset. For small and medium-sized spaces, this option is often the most practical, since it allows you to equip the kitchen not only with a sink and stove, but also with a comfortable work surface, as well as a sufficient amount of storage space. Two of the four walls are involved, while one of the corners remains absolutely free, which allows you to equip close to it dining area. Consider the corner kitchen in detail: let's talk about the benefits, layout options and design features.

Corner kitchen: pros and cons

Pros of a corner kitchen

1. Angle is the ideal base for creating an ergonomic work triangle.

2. One of the corners is fully included in the working area and functionally engaged, which is practical and rational decision for a small kitchen.

3. Corner modules are deep and very roomy, and additional storage space in the kitchen, as you know, is never superfluous.

Cons of a corner kitchen

1. Often there are difficulties with the design corner element, especially if there are uneven walls in the room and different kind protrusions. All this, as a rule, increases the cost of both the project and the furniture.

2. In a headset for a small kitchen, they prefer to make the corner straight and very compact. By tradition, a sink is placed here. Subsequently, owners often complain about the inconvenience of using the sink, since there is very little space in front of it. This is especially noticeable if one of the owners has a large build.

About the right choice Corner kitchens are the most common, so many, without hesitation, immediately order for themselves. L-shaped headset. Often no attempts are even made to “try on” other layout options. But the corner kitchen is far from being as versatile as it is commonly believed. So, for example, in much more convenient and practical parallel layout(two-row set along opposite walls). Is it worth taking the whole corner in a situation where work wall long, and adjacent to it is short, if everything you need fits perfectly on one side ( linear layout)? Why overload already small space? There are several kitchen layout options. Before you do final choice, it is worth considering each of them. And if it turns out to be the most reasonable and ergonomic corner scheme- so be it.

Corner kitchen layout: options

1. Corner kitchen along two perpendicular walls

Kitchen set modules are installed on two sides of the corner. This is classic layout which is referred to most frequently. Suitable for both large and very compact kitchens.

Traditional corner kitchen

2. Corner kitchen with a peninsula

Here, only one of the sides of the furniture corner is located along the wall. The second is positioned perpendicular to it, that is, across the kitchen.

Peninsular corner kitchens

This layout allows you to solve several problems at once. Firstly, the owners get a corner kitchen with an ergonomic triangle and a sufficient number of work surfaces. Secondly, effective zoning of a large room is carried out. In addition, the peninsula often serves as a bar counter.

3. Corner kitchen with breakfast bar

This set usually has U-shape. However, it is possible different variants, because it can be located not only on the edge, but also in the middle (F-shaped plan).

Corner kitchens with breakfast bar

For a small kitchen, a bar should be planned only if there is no intention to equip a full-fledged dining area here. Only then the presence of this element becomes really necessary and expedient.

Corner kitchen design: ergonomics, equipment, arrangement of elements

Working triangle in the corner kitchen

The vertices of the ergonomic working triangle are refrigerator, sink and hob. If we call our triangle ABC, then there must always be a sink at point B. The location of the refrigerator and stove may vary.

Ergonomics of the corner headset

Ideally, you should strive to ensure that the triangle is approximately equilateral. Good corner layout cuisine contributes to this.

Proper layout corner kitchen in terms of ergonomics

Of course, it is not always possible to comply with the triangle rule, because you have to adapt to the initial conditions. But if the kitchen is very large, you need to try to arrange the main elements on both sides of the corner.

Kitchen corner

The inner corner of the kitchen set can be both straight and beveled. Which one to give preference?

beveled corner has a number of advantages. Firstly, this design is not complicated by anything: just open the door and get full access to inner space. There is no need to include additional "stuffing" in the form of any withdrawable and retractable elements. Secondly, beveled corner modules are very roomy. Thirdly, in front of such an angle there are many free space. Thanks to this, enjoy corner sink or a stove is much more convenient.

Sloped kitchen corner with corner sink

Corner kitchens with bevelled corners

If the beveled module turns out to be excessively deep, there are also disadvantages. So, it becomes not easy to reach the wall above the cabinet, which is why washing the apron in this area turns into not the easiest task. If you choose the beveled version, make sure that the module is not too deep.

right angles preferred for kitchens in the style of minimalism and with equipment compact spaces. The fact is that beveled modules take up more space.

Right angle L-shaped kitchen

Straight inner corner not as simple as it seems. Here there are difficulties with access to the internal content. But don't let that scare you: everything was invented a long time ago.

To expand access, the door of adjacent corner modules is often made folding - in fact, it consists of two facades connected by hinges. This greatly enhances the practicality of the headset.

Doors for corner kitchen modules

For deep corner sections with difficult access, there is a variety of roll-out and exhaust “filling”. Rotating mechanisms are popular, known in many countries under the name "Lazy Susan" (lazy susan).

Stuffing for corner modules in the kitchen

Another interesting option― traditional sliding lockers with atypical angular facades.

Equipment options for the corner section in the kitchen

The issue with the design and filling of corner modules is decided individually between the customer and the contractor. When you go to order a new corner kitchen, know that there are options. If you are not offered them - ask yourself or look for another manufacturer.

Ledge in the corner of the kitchen

In many old and new houses, the working corner of the kitchen is accompanied by a ventilation shaft. The protrusions are different: wide and narrow, deep and insignificant. What if it is in this place that it is planned to place the top of the furniture corner?

All over the world, people live in houses with various ledges, beams, boxes, crossbars. But far from everywhere it is customary to be "shy" of these design features and hide them as much as possible. See how the Europeans deal with deep kitchen ledge: they just tear kitchen set in this place, without trying by hook or by crook to connect the two sides of the corner into a single whole.

Ventilation shaft in the corner of the kitchen: how to plan cabinets?

Certainly, if the protrusion is shallow, it makes no sense to divide the kitchen into parts. The obstacle can be gracefully bypassed. However, it is better to refuse the upper cabinets in this place, leaving the area empty or decorating it with corner shelves.

Air vent in the kitchen

What to place in the corner of the kitchen?

Most often, a sink is cut into a corner - this corresponds to the principles of an ergonomic triangle. However, the installation of a sink near the window is becoming more and more popular with us. The corner in this case can be given to the oven. This scheme is suitable for a fairly large kitchen, because the oven cabinet must be beveled, which, as we have already said, eats up more space.

Corner kitchen layout

The top of the corner can be given not to a sink or oven, but to a section with a refrigerator. This design of the corner kitchen is almost never found in our country, so the solution is perceived as very original. Much more often put in a corner hob with extractor.

Corner refrigerator from the Italian brand Norcool

Each of these decisions has the right to life. Do not rush to approve the plan with a sink in the corner - perhaps a different configuration will be more successful for you. But be sure to keep in mind the rule of the ergonomic triangle: it is advisable to place the sink somewhere in the middle between the stove and the refrigerator.

Corner kitchen design: equipment

If the "shoulders" of the corner kitchen are rather short, each lower section can be accompanied top cabinet. Otherwise, there will not be enough space for storing utensils.

If the kitchen is long, the abundance of upper modules will make the work area bulky and heavy. This will deprive the room of lightness and comfort, especially if the facades are rather dark. Upper cabinets it is worth hanging only on one side of the corner, and on the other, place, for example, a hood, shelves, wall decor.

Another design option for a large kitchen: on one side of the corner there are traditional pairs of top and bottom sections, and on the other - completely closed cabinets-columns with built-in refrigerator. Tall solid cabinets look like a wall surface, which makes them easier to perceive than pedestals with wall cabinets.

Photo of medium and small corner kitchens

Small corner kitchen

Small L-shaped kitchen

Small white corner kitchen

Corner kitchen design option

Combined apron in the corner kitchen

Corner set for a small kitchen

Compact headset

Small black and white headset L-shaped

Design option for a small corner kitchen

Working triangle in a small corner kitchen with a built-in refrigerator

L-shaped set in a narrow kitchen

Compact corner kitchenThe combination of colors in kitchen furniture

7650

Corner kitchen set- This great choice for small and medium kitchen facilities: it takes up a minimum of space, but the owners have the opportunity not only to install a sink and stove, but also get a comfortable work surface and roomy storage space for utensils. The corner kitchen is stylish, comfortable and, we will talk about the advantages, disadvantages and features of such sets in our article.

Benefits of a corner kitchen

• With the help of a corner kitchen, you can create a large and ergonomic working space;
• The corner kitchen is roomy and rational: one of the corners completely becomes a working area. Often, headsets are equipped with comfortable and roomy drawers and cabinets, the so-called "carousels" (swivel elements) are very popular, they do not take up much space;
• A corner kitchen is a great way of zoning; with the help of an island or a bar counter, you can divide the room into a cooking area and a dining area;
• Corner kitchens are made in size and taking into account the characteristics of the room;
• Modern designers offer a wide range of kitchen furniture different sizes and styles, so that the buyer has the opportunity to complete the headset at his discretion.

Disadvantages of a corner kitchen

• The corner kitchen is not convenient in all kitchens, especially for rooms with uneven walls and various protrusions;
• If the kitchen is small, a sink is often placed on the corner, sometimes the owners complain that it is inconvenient to use it, since there is very little space;
• The corner set is not appropriate in all kitchens: for example, for a narrow elongated room it is easier to arrange regular headset along opposite walls or run linear layout. Overloading an already small space is not worth it.

Variations in the layout of the corner kitchen

1. Along two perpendicular walls. Kitchen modules are installed along the corner, this is a classic layout that is suitable for both large kitchens, and for rooms of modest size.

2. Kitchen with a peninsula. Myself furniture set is located along the longest wall, and the so-called "peninsula" runs across the room. It can be either a small bar counter or a roomy cabinet. Conventionally, such a kitchen divides the room into a dining and working area, this a good option for rectangular spaces.

3. U-shaped kitchen. This option is suitable for owners of kitchens large sizes, since the corner kitchen occupies two walls and a little space in the center of the room. The bar counter is appropriate only in a spacious room, in a small room it will only clutter up the space.

Often corner set It is formed according to the principle of an equilateral triangle: the refrigerator, sink and stove should be approximately the same distance from each other. This is due to the fact that the sequence of cooking is as follows: we take out, wash, process and cook (fry, bake, etc.). If the kitchen is large, it will be better when the stove and refrigerator are on both sides of the corner.

Internal corners of the headset

Conventionally, corner kitchens are divided into sets with a right and beveled corner. The beveled corner has its advantages: firstly, better access to all elements, no special roll-out or retractable mechanisms. Secondly, beveled modules are more spacious, and thirdly, they can be placed next to the stove or sink - then access to these furnishings will be free.

The beveled module should not be too deep, since it will not be easy to clean the wall above the cabinet, and you will have to reach for objects hanging on the wall.

Right angle suitable for spacious kitchens, however, there are some difficulties with accessing the internal content. Often, the kitchen is made of two facades, standing end-to-end, and the “stuffing” is equipped with exhaust and roll-out mechanisms. So-called "carousels" are popular, in some countries they are called "Lazy Susan".

Here are some options:

The issue with the design and filling of the module is discussed with the manufacturer, but some nuances must be taken into account. The horizontal lines of the headset can be of different levels or the same, in the first case the desktop is slightly lower than the sink. The width and length of the headset depends on the size of the room, the depth of cabinets and cabinets is mostly standard - 45 cm.

As for the materials of manufacture, the furniture frame is often made of chipboard with a laminated surface, while the facade is wood, aluminum profiles, glass and so on. Carefully approach the choice of material for the countertop: often chipboard, plastic, steel, natural or artificial stone are used for its manufacture.

Steel is stronger but shiny elements appropriate not in every interior. Also practical a natural stone, but it is not cheap, so people prefer artificial decorative counterparts. Impact-resistant glass is also an expensive material, since glass is processed according to its strength properties. special technologies. Chipboard and plastic are the cheapest option, but a fairly wide range of colors is offered.

You should not save on fittings: the functionality and service life of furniture depend on it. Steel guides must be present in the baskets and drawers. Aluminum and plastic fittings serve a maximum of 2-3 years. It is also worth taking care of buying good closers, the hinges must be steel. You can choose decorative accessories at your discretion.

How to correctly arrange the kitchen?

From an ergonomic point of view, a sink located in the corner is not the best practical option if there are cabinets above it. It is better to move a little to the side, and make a countertop in the corner. Also on sale there are cabinets with a ledge of 20-30 cm, they will be much more convenient to use. Evaluate the shape of the sink: round ones are not very practical, but they save space, rectangular ones are more convenient to use.

It is also worth considering where to place the oven. If next to a window, then keep in mind that the distance from hob to the wall must be at least 40 cm. The hood can be located at a height of 65-75 cm from the stove.

The refrigerator can be either a built-in part of the headset or act as a separate object. If it is a part, it must continue the furniture range, match in color and style. A separate refrigerator is somewhat out of the picture, however, even corner models so it won't be hard to find the right one.

The matter is somewhat complicated if your kitchen has all kinds of ledges, corners, beams and crossbars. Of course, ventilation shafts, ducts, pipes greatly complicate life: in this case, the headset is often “torn apart”, you should not try by all means to blind the two sides of the corner into one.

In kitchens with corners and ledges, there is no need to focus on the abundance of upper modules, otherwise the work area will seem heavy and cumbersome. It is better to place closed cabinets on one side of the corner, and on the other wall - open shelves, hoods, decor, and so on.

Style and design of the kitchen

Currently in stores a large assortment furniture, you can actually find an even larger selection at custom order. The corners are the most popular. Less well known are baroque styles, romanticism, empire, chalet, loft and others.

Carefully consider lighting so that the corner kitchen looks advantageous from all positions. In addition to the central lighting fixtures it would be nice to make hidden lighting under wall cabinets so that light falls on the work area. You can complement the interior with stylized floor lamps and sconces located at the top of the apron, use ceiling spotlights. Its intensity must be selected individually, depending on the tone of the headset. For light and cold shades, it is better to use lamps. daylight, and here warm light will bring a touch of comfort to dark headsets.

Think carefully about where you will stand Appliances: leaving a lot of appliances in sight is not worth it - it is better to give them a place in cabinets or on shelves. But a beautiful electric kettle or a food processor will fit perfectly into the interior and will not spoil it at all! In any case, the emphasis should be on beauty and original design furniture, and only then you can “dilute” the interior with decor elements and kitchen utensils!