How to easily make a slime at home. Making a slime with very simple ingredients. Easy way to make flour slime

Caring mothers are often concerned about the question of how to make a Lizun toy, which would contain only useful components, and not sodium tetraborate or glue, as in store version. Fortunately, there are many recipes for creating fun at home with yourself. different ingredients. Made with love, by performance characteristics a homemade toy is by no means worse than a purchased one, and the mother can be sure that Lizun will not harm the baby.

Kids just love to play Slime - this toy, useful for fine motor skills, is easy to make at home.

What is "Lizun"?

The original name of Slime is Slime. The toy was created by Mattel in 1976. Modern name fun acquired in the 90s. last century after the appearance of the cartoon "Ghostbusters". One of his characters, the Ghost Slimer, was very reminiscent of Slime: he was green and easily penetrated walls, leaving a greenish sticky slime on the surface.

Just like slime - a soft jelly-like substance that easily changes shape, but does not melt in the hands. It can become hard and elastic with a sharp or strong impact, stick to the ceiling or run down the wall, leaving an unsightly mark. If desired, the toy can be given any shape, and at the end of the fun it can be easily placed in a jar and proper storage does not lose its properties for a long time.

Psychologists consider the Lizun toy to be a wonderful anti-stress. It helps to relax the baby, occupy his imagination, grow up with a good developed fantasy. Moreover, Slime develops motor skills and motor activity well, strengthening nervous system, attention, vision, memory.

How to cook "Lizuna" at home?

There are quite a few easy recipes that describe how to make Slime. When choosing a method, first of all, you need to pay attention to whether the product will be safe for the baby if he decides to taste the toy.

It often happens that a toy at home does not turn out the way it was intended, even with the exact observance of the proportions and execution technique. The reason for this is the quality of the products that were used to make the homemade Slime. In this case, you need to gradually select the correct proportions.

After manufacturing, the toy is removed from the dishes in one mass. If it is heterogeneous, Lizun needs to be kneaded with his hands for several minutes. If the slime is too sticky, it needs to be thinned by increasing the water content. If the mass does not stick to the hands at all and slips off, it should be slightly dehydrated by pouring flour, borax or glue into the mass and mixing well again.

From shampoo, shower gel or liquid soap

You can quickly create Lizun yourself by combining shower gel (can be replaced with liquid soap) with shampoo in equal amounts. Then place in the refrigerator for a while (optimally - overnight), after which it remains just to wait until the mass thickens. To make the toy transparent, preference should be given to chemistry without granules! Slime made from shower gel is stored in the refrigerator in a closed jar. Such a toy "lives" for about a month.

From shampoo, starch and water

Without applying special efforts, you can create Slime from starch (200 g), shampoo and water (100 ml each). Combine the ingredients, mix thoroughly and leave in the refrigerator for twelve hours, after which the toy is ready. When the game is over, slime must be placed in closed jar and place it back in the refrigerator. Expiration date - a month.

From baking soda

You can simply prepare Lizun for a child from baking soda and detergent for dishes. There are no exact proportions, because for drugs different brands characteristic consistency. To create a toy, you need to pour a little water into the detergent to dilute it. Then put a little soda and knead, as shown in the photo. If the consistency is too thick, dilute with water.

There is another way to make a soda slime, which involves the use of stationery PVA. For this purpose, you need to mix warm water with glue (50 ml each) to a homogeneous composition. Then pour in the paint and mix well again. After that, dissolve 50 g of soda in 1 tbsp. l. water and begin to slowly pour into the mass. Let it freeze. The product will last about 3-4 days.

From flour

Absolutely safe fun for children is made from flour. To this end, 2 Art. flour must be sifted through a sieve, pour first cold water and then hot, but not boiling water (50 ml each).

Thoroughly mix all the ingredients until a homogeneous consistency. Finish off with a few drops of food coloring, optionally for taste - sugar or salt.

You need to stir until the dough becomes a uniform color. Leave in the refrigerator for three hours, take out, knead with your hands.

From PVA glue and sodium tetraborate

If you want to create a toy at home that is as close as possible to the store, you need to take:

• Paint (any food coloring).
• PVA - 60 g.
• Borax or sodium tetraborate (Bura) - sold in a pharmacy. If a solution is taken, one jar is enough. If powder, then 1 tbsp. l. must be dissolved in 0.5 tbsp. liquids.
• Water - ¼ tbsp.

The water must be slightly warmed up and the PVA should be gradually poured in (the more glue, the more springy the Lizun will be). Mix water with glue until smooth, add food coloring. If you purchased Borax in powder, then it must be diluted with water (15 g per 30 ml) until smooth - without lumps.

Next, you need to mix all the components together. If the masses are very sticky to the hands, you need to add more Borax. Pour the resulting mass into a bag and start kneading with your hands. After some time, the toy will be ready.

From liquid starch and PVA

Borax can be replaced with liquid starch (sold in hardware stores):

• Pour 100 g of the product into a bowl, pour in 200 g of glue (the amount depends on the consistency you need to get);
• to give color, you can drop a little dye;
• stir until you get a homogeneous mass, the desired consistency;
• leave in the refrigerator for 1-2 hours.

Sparkling Slimer

To make Glitter Slime, you will need:

• glitter glue (100 ml);
• 1 glass of water;
• 1 tsp Boers;
• 1 st. l. water.

Mix borax in a glass of water. Pour a package of glitter stationery glue into another container.

Add a tablespoon of water (15 ml) to the glue, mix well - this will make the mass more flexible and pliable. Next - add Borax solution to the mixture, knead Lizun to the desired consistency.

Magnetic Slime

In order for the Slime to glow and be attracted to the magnet, you will need:

• sodium tetraborate powder (borax);
• water;
• PVA - 30 g;
• iron oxide;
• neodymium magnets;
• paint with phosphorus (optional).

The cooking process is simple:

• stir 0.5 tsp. sodium tetraborate in a glass of water;
• in another bowl, prepare a mixture of PVA and 0.5 tbsp. water, after which you can pour in paint with phosphorus;
• two mixtures very slowly and carefully combine with each other until a homogeneous mass appears.

We make a “pancake” from the finished Lizun, sprinkle iron oxide on top and knead well until a uniform color and condition.

To create a slime from Borax without glue, you need to stock up on water, paint, polyvinyl alcohol in the form of a powdered substance. Medical alcohol or vodka is not suitable here:

1. Dilute polyvinyl alcohol with water and cook over low heat for 45 minutes, stirring constantly so as not to burn. Then turn off the gas and leave to cool.
2. Dissolve 2 tbsp. l. Borax in a glass of water, then strain and carefully pour into alcohol, observing the proportions 1:3.
3. Mix and pour in the dye. The toy is ready.

From toothpaste

Often the question arises of how to make slime from toothpaste. For this purpose, it is necessary to squeeze 20 ml of toothpaste into the dishes, pour the same amount liquid soap, knock down a homogeneous mass, where gradually add 5 tsp. flour. First, knead the mass of toothpaste with a spoon, then with your fingers. At the end of the work, you should slightly wet the Slime with water and wrinkle it with your fingers.

Toothpaste slime is very affordable, because every home has an “ingredient” for a toy.

From plasticine, gelatin and water

Often the question arises of how to make Lizun from plasticine. The method involves the use of:

• gelatin - 50 g;
• plasticine - 100 g;
• water.

Pour gelatin with 200 ml of cold water, leave for an hour, then put on water bath. After boiling, immediately turn off the gas. Soften plasticine with your hands and mix with 50 ml of warm water. Pour the swollen gelatin into the plasticine substance and mix until a viscous elastic mixture. Place the mass in the refrigerator and wait until it hardens.

The color of the toy can be made absolutely any, it is important to know here color preferences baby

From shaving foam

You can make your own slime using shaving foam. In this case, the toy will be soft and airy. Shaving foam, glue, acrylic paint, boric acid, liquid soap.

To prepare the toy, you need to pour 125 mg of thick high-quality glue into the dishes, add green pigment and knead until a thick dark mass is obtained. To make it lighter, you can release shaving foam into the mass (without sparing). After mixing, the mass will acquire the consistency of a sweet cream.

The next step is the preparation of the thickener. For this purpose it is necessary to pour into separate container 15 g boric acid, a little water, a couple of drops of detergent. Stir, add to the colored mass prepared from the glue and stir.

From hand cream

You can make a plastic toy yourself from hand cream and perfume. This recipe is unusual and may not work, but if you want, you can try.

It is necessary to squeeze a thick cream into a jar, add dye and mix. Then add a couple of drops of perfume and continue to stir. When the mass thickens, knead with your hands.

Lizun has a specific consistency, so it is necessary to properly care for and store it. So that the plastic toy does not dry out, it should be stored in a jar with a well-closing lid. For the same reason, caring for jelly-like products involves hiding them from sun rays and heating appliances.

It must be borne in mind that the slime should not come into contact with the pile. If the villi stick to the Slime, it will lose structure and smoothness.

« Lizun" is a mass of viscous jelly-like material that has the properties non-newtonian fluid. She stretches well and takes various forms. This toy is also known as handgam or slime(Slime), which in English means "slime".

Which of the children, and even adults, will deny themselves a funny game with a slime? Make it with my own hands It will take a little time, and even fewer materials will be needed. Below are the most simple ways how to make a slime yourself from improvised materials. They differ mainly in the ingredients that are used in the preparation of homemade slime.

Subject to all the rules and a great desire, handgama at home can be done in 5 minutes.

An easy way to make a slime at home from boron (sodium tetraborate) and PVA glue

From sodium tetraborate, an interesting slime is obtained, which is similar in consistency to the original sold in children's goods stores.

materials

To make this slime, prepare:

• boron - 0.5 tsp;
• transparent clerical glue - 30 g;
• food coloring yellow and green;
• water.

1. Take any two containers. The slime mixture will need to be prepared in two parts. Pour a cup of warm water and half a teaspoon of boron into the first container. Stir this solution thoroughly until the powder is completely dissolved.

2. In a second container, mix half a cup of water, glue, 5 drops of yellow and 2 drops of green dye. Thoroughly mix all the ingredients to a single consistency.

3. Carefully pour the boron solution into the second container. You will see how the mixture begins to turn into a viscous mass before your eyes. She can already play. This is the slime. Make sure that the child does not take it into his mouth.

Be sure to store the slime in a closed container.

How to make slime from glue and starch

materials

To make this slime you will need:

• liquid starch;
• PVA glue;
• small tight package;
• food coloring.

The dye must be taken food. If he plays with a slime Small child, food prefer natural dyes. If you do not have dyes, you can add gouache to the mixture.

Pay attention to PVA glue, in order for the slime to turn out, you need a glue made recently. Glue must be white.

1. Pour 70 ml of liquid starch into the bag. It is different from food and is used when washing clothes. In the absence of such, you can take the usual one, but it must first be diluted with water in a ratio of 1: 2.

2. Add a few drops of dye to the bag. You don’t need to add a lot of dye, otherwise the slime will paint your hands during the game.

3. Then pour 25 ml of PVA glue into the bag, after shaking the bottle well.

4. Close the bag tightly or tie it up. Mix the contents thoroughly. This must be done until the main mass turns into a clot. In addition to it, there will be some liquid in the package.

5. The liquid must be drained. The clot itself is the slime. Blot it with a napkin, removing excess moisture from the surface. Now they can play.

If your slime sticks to your hands, remake it by adding less glue or by increasing the starch content. If the slime, on the contrary, is too hard or crumbles, then you have added more starch than necessary.

Slime prepared in this way will be suitable for games within a week. It must be stored in a sealed container or jar so that dust does not get on it.

Do not forget to wash your child's hands after playing and do not let him taste it.

Lizun from soda

Due to the content of dishwashing liquid, baking soda slime is recommended to be given to children under adult supervision. After playing with such a slime, you should definitely wash your hands.

materials

• Dishwashing liquid;
• soda;
• water;
• dyes as desired.

Step 1. Pour dishwashing liquid into the container. There is no specific dosage, gradually mixing the rest of the components, you can simply pour in dish liquid or water to thin the mucus.

Step 2 Pour soda into the container, mix everything thoroughly. Your mixture should look something like the photo. For a slime, such a mixture is thick, and therefore dilute it a little with water and mix everything thoroughly again.

The final color will be as shown in the photo. You can change it up a bit by adding a few drops of dye.

Soda slime is ready.

Easy way to make shampoo slime

This is a very simple way to make a slime, it turns out to be the right consistency, but you need to store it in the refrigerator between games. This slime, like many others, should never be taken into the mouth, and hands should be thoroughly washed after playing with it.

materials

• shampoo;
• dishwashing liquid or shower gel.

Step 1. Take a container and mix shampoo and dish liquid or shower gel in it in equal proportions. Please note that the gel and liquid should not contain any granules, and if you want the slime to remain transparent, the components must be of the same quality.

Step 2 Mix the ingredients thoroughly and put them in containers in the refrigerator. The very next day you can use it for games. Later store it in the refrigerator in a closed container. When a lot of garbage sticks to the slime, you can throw it away, it will begin to lose its properties.

The maximum shelf life of such slime is 1 month.

Washing powder slime

To make such a slime, you will need not an ordinary dry washing powder, but its liquid counterpart. It is the powder that needs to be used, since liquid soap, gel, etc., have a completely different consistency and, in combination with the elements of this recipe, it will not work to make a good slime out of them.

materials

So, before starting work, prepare:

• liquid washing powder;
• PVA glue;
• food coloring;
• thin rubber gloves;
• container.

1. Pour a quarter cup of PVA glue into an empty container. You can take it more or less, it all depends on the desired size of the slime.

2. Add a few drops of food coloring to the glue, mix this solution thoroughly until a uniform shade.

3. Pour 2 tablespoons of liquid powder into the solution. Thoroughly mix the entire solution. Gradually, it will become sticky, and the consistency will resemble putty. If your solution is too thick, add liquid powder to it drop by drop, diluting the solution.

4. Put on gloves, remove the mixture from the container and carefully, like dough, begin to knead the workpiece. Extra drops of powder should come out of this solution, if any, it will begin to resemble a soft gum in consistency.

Slime must be stored in a closed container. If it starts to lose its properties, send it to the refrigerator for several hours.

Easy way to make flour slime

Relatively safe for children, slime is made from flour. Even small children can play like this, especially if natural ones are used instead of food colors. With natural dyes, the color of the slime will not be as intense.

materials

To make slime, prepare:

• flour;
• hot water;
• cold water;
• dyes;
• apron.

1. Pour two cups of flour into a container. Pass it through a sieve so that the mass is homogeneous and easier to prepare.

2. Pour a quarter cup of cold water into a bowl of flour.

3. Then pour in a quarter of a cup. hot water but not boiling water.

4. Stir the entire mixture thoroughly. Be sure to make sure that the consistency is homogeneous, without lumps. It is very important.

5. Add a few drops of food or natural coloring. If food coloring, add a couple of drops. Stir the whole mixture thoroughly again. It must be sticky.

6. Place the slime container in the refrigerator for several hours. After the mixture has cooled, it can be used for its intended purpose.

How to make a magnetic slime

The original magnetic slime that can glow in the dark can also be made at home.

materials

• Bora;
• water;
• glue;
• iron oxide;
• Neodymium magnets.

1. In a container, mix one glass of water and half a teaspoon of boron. Mix everything thoroughly so that the boron is completely dissolved in water. This mixture will be needed to activate the second half of the composition.

2. In the second container, mix half a glass of water and 30 grams of glue. Mix thoroughly and add paint. Here you can add phosphor paint if you want the slime to glow in the dark.

3. Carefully pour the boron solution into adhesive mixture. You need to add the solution gradually, constantly stirring the mixture of glue. Once the mixture begins to harden and reaches the desired consistency, stop adding the boron solution. You can pour out the rest.

4. Take the already prepared slime and flatten it on a flat surface. Sprinkle some iron oxide in the middle of the slime. Then knead the hendgam thoroughly until it acquires a uniform gray color.

The magnetic slime is ready. When interacting with a magnet, the toy will reach for it.

• You can experiment with slime colors and even make a whole family. You can also use various glitters, small stars, etc.
• Can be used essential oil to give the handgum an interesting scent.
• If you want the slime to retain its properties and last longer, it must be stored in a sealed container and in a cool place. Also, it is advisable not to put such a toy on a carpet or other surface from which small fibers can easily stick.
• If the slime starts to dry out, place it in a container of warm water.
• Such a toy is NOT toxic and NOT poisonous, although of course you should not eat it and you should wash your hands after playing.
• It is also worth noting that some try to make a slime using soda instead of borax or starch, but in this case a rather solid mass will be obtained. So don't waste your time on this.
• Remember that the life of such a toy is extremely short (about a week), so stock up on materials for making slimes at home, as this activity is contagious!

For the first time such a Slime toy appeared in 1976, and was made by Mattel.

• The movie Ghostbusters (1984) brought huge popularity to the toy, namely one of its main characters is a ghost named Slimer.
• Handgum can play the role of a hand massage tool, as well as for the development of fine motor skills.
• The slime that is sold in the store (aka "Smart Clay") is the result of a mixture: 65% dimethylsiloxane, 17% silica, 9% Thixatrol ST (derivatives castor oil), 4% polydimethylsiloxane, 1% decamethylcyclopentasiloxane, 1% glycerol and 1% titanium dioxide.

Don't miss interesting news in photos:

Lizun is a children's toy in the form of a bright jellyfish that looks like chewing gum with a jelly-like structure. AT English language this toy is called "Slime". Below we will look at how to make slime at home.

Lizun can take any shape, stretch, take the form of a container in which it will be placed. Despite the fact that the slime has been on sale for a very long time, it is still popular and in demand among children both in our country and abroad.

However, making a slime with your own hands is much more interesting than buying it in a store, because in this case you can do exactly what you want, with individual features, texture, color, smell and properties.

For a children's toy, of course, we will choose the most natural materials, you can also make the slime colorless in case of an allergy in a child. In our article we will tell you how to make a slime. To do this, you will need to stock up on all the necessary components so as not to be distracted during the process and fully surrender to creative work.

This toy can be made using many variety of materials from glue to shampoo.

How best to create and store slime

Some tips to help you make your creation better and more interesting, as well as extend its life.

Tips for making at home:

1. Add gouache to the solution, you need colors so that your slime is bright
2. For more beauty and originality, you can add cosmetic sparkles
3. For pleasant smell toys can be dropped into the essential oil mixture
4. In order for the slime not to spoil clothes, leaving marks, and also to be more viscous, you can add 2-3 drops of vinegar.

Storage Tips:

1. Keep the slime in a closed container, otherwise it will dry out.
2. Do not put the toy near sources of high temperature - near a fireplace or radiator, as well as in the sun
3. Do not place the slime on fluffy surfaces such as woolen and other clothes or carpets, otherwise it will quickly become clogged.

Now let's look at how to make slime. Read all and choose the most suitable for you.

Method number 1

Lizun from silicate glue and liquid detergent

Probably the fastest, easiest and reliable way making such a toy.

We will need:

1. Silicate glue (1 bot.)
2. Liquid Concentrated Gel Laundry Detergent
3. Dye
4. Container and spatula

We take a container, pour about 1 tablespoon of glue there, add dye, mix well, then take the washing gel and pour a teaspoon into our container. All this must be mixed well again. It turned out a viscous substance, we take it in our hands and knead it well until a homogeneous state. Our slime is ready.

Video of quick slime making from silicate glue and liquid laundry detergent

Method number 2

From PVA glue and sodium tetraborate

In order to make such a toy, we need:

1. PVA glue (preferably with a fresh date of manufacture)
2. Sodium tetraborate (available at chemical supply stores or any pharmacy)
3. Gouache or food coloring for color
4. Plastic container 2 pcs and a spatula for mixing
5. Rubber gloves (can be medical, so as not to get your hands dirty)
6. Paper towel or napkin
7. Measuring cup or spoon

We put on gloves, otherwise, as you like, take PVA glue and pour it into plastic container 100-200 ml glue, depending on right size. Add gouache, and mix thoroughly until a homogeneous mass is formed. After we take a solution of 1-2 bottles of borax, depending on how much glue you have chosen (100ml - 1 bottle, etc.), if the borax is in the form of a powder, then dilute it in water (1 tablespoon per 1 cup of warm water ), mix well. The resulting mass is put on paper towel so that all excess moisture left, then return the slime for 5 minutes to the bag and knead it well, take out the finished toy from the bag.

The method does not work with PVA glue from all manufacturers. Which glue is better to choose, you will see below in the video. In any case, this method is not the best.

Video of making slime from tetraborate and PVA glue

Method number 3

How to make a slime without tetraborate, from PVA glue and starch

What will we do:

1. starch in liquid form
2. PVA glue
3. Plastic bag
4. Dye

We take a bag and pour in about 100 ml. liquid starch (pre-diluted starch 1: 2), add quite a bit of natural dye, add PVA glue 30 gr. close the bag well and mix until thick. Drain the rest of the water and mash the slime in the bag for 5 minutes. Store the toy in a closed container and in a cool place (valid for about 7 days). If the slime sticks to your hands, then you need to make it again, reduce the amount of starch or put more glue.

In the first two cases, we prepared a slime from PVA glue. This toy is not expensive at all. It is very good when a child participates with you. good process development and just activities for children. Next, we will consider several more cooking methods, but without glue.

Method number 4

Lizun without PVA glue, from soda, sodium tetraborate and dish detergent

Ingredients needed to make slime:

1. Dye
2. dish detergent

Pour dishwashing liquid into the container, the amount at your discretion, it can be somewhere around 50-100 gr., Gradually pour in water to control the density. Next, add the dye, and then pour the soda. When you mix everything, it can get thick, add a little water and mix again. Your toy is ready.

This slime is not very natural, so after the child plays with it, you need to wash your hands.

Now we will consider the safest type of slime, this is a flour slime, of course, you can’t eat it either! But for kids, it is more than suitable.

Method number 5

How to make slime without PVA and sodium tetraborate, from flour and water

1. Hot water
2. Cold water
3. Dye natural, food

Pour about 100 g of cooked flour into a container, first pass it through a sieve. After pouring about 50 gr., not very hot water. Next, we mix everything until a homogeneous mass, and make sure that there are no lumps, you can do this with a mixer. After we add the dye, and mix again, a sticky mixture is obtained. If it turned out liquid, you can add flour, or, on the contrary, water if tight. In this container, put the slime in the refrigerator, where it will reach full readiness.

Method number 6

Lizun from washing powder and PVA glue

What you need to create such a toy at home:

1. Liquid laundry detergent
2. PVA glue
3. Food coloring
4. Container and spatula
5. Rubber gloves

We take PVA glue and pour it into a bowl, the amount of glue depends on the desired size of your slime. We drip a little dye, literally three drops. Then we take the powder 3-4 tbsp. spoons and put in a container. We mix everything well. We bring our slime to the desired elasticity. After we take it out and begin to stir it, like dough, until a homogeneous state. We store in a closed container, the validity period is 1 month. Refrigerate if necessary.

The next type of slime will be the longest in its preparation, but the result will please you. it will be as close as possible to the store. Do not forget to involve children in the process, it should be interesting and entertaining for them to make a toy for themselves.

Method number 7

Lizun from plasticine and gelatin

Another manufacturing method is to make it from gelatin and plasticine. Such a slime will keep its shape well and will be less amorphous than slimes made according to other recipes.

To create this type you need:

1. Children's plasticine
2. Food grade gelatin
3. Two containers (plastic and metal)
4. shoulder blade

In the first container, put 1 tablespoon of gelatin, pour one glass of warm water and leave to stand for one hour. When the specified time has passed, place the container with gelatin and water on gas, bring to a boil and remove from heat. After that, carefully knead 100 grams of plasticine in your hands. Tear the plasticine into small pieces, put in a plastic container, pour 50 grams of water and crush the plasticine in the water with a spatula.

Then thoroughly mix the contents of both containers until you get a homogeneous mass and refrigerate until the slime has cooled. Lizun from plasticine is ready!

Method number 8

Making slime from shampoo

Such a slime is quickly made at home, but is not very durable. But due to the ease of manufacture, this method is quite popular.

Ingredients that are needed:

1. Any shampoo;
2. As fresh as possible glue "Titan";
3. Gloves

Take a lasting plastic bag and pour glue with shampoo into it. The ratio is shampoo two parts, glue three. Seal the bag and mix everything thoroughly until the mass becomes thick. For better consistency, you can put the bag in the refrigerator. Slime is ready to use!

We have learned how to cook slime in different ways, of course, you will choose any of your choice. But sometimes it happens that the toy turns out to be either sticky, or liquid, or even completely falling apart and not homogeneous, do not be afraid to add the main ingredient until the desired elasticity is formed. And if at all something went wrong, take and redo the toy. Because there is no limit to perfection.

Slimes have been a fairly popular toy for a long time. It is popular both among children and adults, because few people can resist the temptation to crush this multi-colored, and sometimes even, substance, which can easily take on various forms right in the hands.

At the moment, you can find a lot on the Internet various recipes slimes, but not all of them are written correctly, so homemade slimes often do not work out. Further, only proven recipes will be written so that everyone can make this toy at home, which will be no worse than the purchased one.

without PVA glue and without sodium tetraborate

To make a slime without PVA glue and without a thickener, carefully follow the recipes. If you are making a slime for the first time, then you need to control the proportions. It is better not to experiment when you are a beginner. To make a slime without PVA glue, carefully follow the steps, ingredients and proportions.

Slime recipe without plasticine glue

Not everyone knows, but plasticine can also be involved in the creation of this hand gum. If you have all the ingredients from the list below to make a slime, then be sure to try making one at home. You must like it!

So here's what you need:

• Plasticine of any color you like (100 grams)
• A small bag of gelatin (15 grams)
• Water (250 ml)
• metal bowl
• plastic bowl
• Spatulas or sticks for stirring

Step by step slime recipe without glue:

• In a metal bowl, soak the gelatin in 200 milliliters of water. room temperature. Let this mixture sit for an hour without stirring.
• After the allotted time, when the gelatin swells, put the bowl on the stove on the slowest fire so that the heating of the mass is more even. Constantly stirring, keep an eye on when the gelatin boils and then immediately remove the bowl from the stove.
• While the gelatin is cooling, it is necessary to knead a piece of plasticine with your hands until it becomes soft and pliable.
• Mix the softened plasticine with the remaining water and mix.
• Gelatin should have cooled down by this point and now it is necessary to mix it with plasticine. Mix as thoroughly as possible!
• Leave the slime in the refrigerator for 15-20 minutes. You can leave it for a shorter time if the slime is the softness you need.

That's all! It was easy and quick to create a slime without PVA glue, which you will definitely like!

Slime recipe without cornstarch glue and shampoo

With the shampoo that everyone has, you can also make slime without glue! Of course, to create it, you also need corn starch, but it can also be at home, and if not, it is very easy to find it in any grocery store.

These ingredients are needed for cooking:

• Plastic bowl for mixing ingredients.
• Shampoo (120 ml). It is better to use thick.
• Corn starch (280 grams).
• A glass of water at room temperature.

Step by step recipe:

• Add shampoo to the bowl and add coloring or glitter if you decide to decorate the slime. Stir.
• Add cornstarch.
• If after the first two steps you are satisfied with the density of the slime, then you will not need water and then your slime is ready.
• If you want a softer slime without PVA glue, then slowly add one teaspoon of water to the mass, stirring each time with your hands to understand when there is enough water.

Slime recipe without glue from shampoo and salt

If you couldn’t find the starch for the previous recipe, then this recipe is definitely suitable, since absolutely everyone has salt!

Here's what you need to prepare:

• Thick shampoo (200 ml).
• Salt.
• Dyes and/or glitter for decoration.
• Mixing bowl.

Step by step recipe:

• Add the shampoo to the bowl and add any embellishments if you use them.
• Start mixing the shampoo and gradually add one tablespoon of salt into it. Add salt until the mixture becomes thick and lumpy.
• Remove mixture from freezer for 60-90 minutes. The time depends on how thick you want the slime to be.

This is how, with the help that every home has, you can cook a good slime without glue. But it is worth considering that such a slime will melt in your hands and become more liquid, for this, just re-freeze your slime.

Slime recipe without glue and sodium tetraborate from soap and hand cream

From any hand cream and detergent or soap, you can also make a slime without glue! Let's see what is needed for this and how to do it.

Ingredients:

• Soda (teaspoon).
• Soap or dishwashing liquid (tablespoon).
• Hand cream.
• Mixing bowl.
• Spatulas for mixing ingredients.
• Dyes and various decorations.

Step by step recipe:

• In a bowl, thoroughly mix baking soda and soap.
• Add hand cream and mix thoroughly again.
• If you want to decorate the slime, then add the desired decorations to the mixture and mix until smooth.
• Transfer the mixture to a small transparent bag and refrigerate for at least 2 hours. If after the specified time you do not like the consistency of the slime, then leave it for the same amount.

If you choose a cream with your favorite scent, then the benefits of such a toy will be even greater!

Clear liquid soap and sugar slime recipe

Such a slime without glue can be decorated with any glitter and dyes, which will turn it from a boring transparent substance into a fun and colorful toy!

You need the following ingredients for cooking:

• dense transparent soap or shampoo (5 tablespoons).
• Sugar (2 tablespoons).
• Mixing bowl with lid.

Step by step recipe:

• Mix sugar and soap or shampoo, whichever you decide to use, in a bowl until smooth.
• Close the bowl tightly. Better for such purposes, a food container is suitable, which comes with lids on special clips that allow you to tightly close the container.
• If you do not have such dishes and there is nothing to close the bowl tightly with, then you can simply wrap it with a bag and secure it with a rubber band.
• Put the finished mixture in an airtight container in the refrigerator for at least a day. After a day, if the consistency of the slime did not suit you, then leave the substance for another day in the refrigerator.

Slime recipe without flour glue

Such a slime can be made for the smallest and most curious, since there is nothing harmful in the composition and nothing bad will happen if the baby tries the mixture.

To make this slime without glue you will need:

• Wheat flour of any grade (400 grams).
• Hot water (50 ml).
• Cold water (50 ml).
• Food coloring if the slime is made for a child. Adults can use any dyes and other decorations they wish.
• Mixing bowls.

Step by step recipe:

• It is better to sift the flour into a bowl so that the consistency is more uniform.
• Pour cold water into the sifted flour in a thin stream and stir at the same time so that no lumps remain.
• Now add hot water in the same way while stirring.
• Next, add decorations and mix thoroughly.
• Upon completion of the previous points, the mass should be left to cool. Time can be different for everyone, so check the slime every hour.
• If the finished slime sticks to your hands, you can lightly sprinkle the toy with flour.

In order for the slime without glue to please you as long as possible, it is better in a package. It is worth considering that since all the ingredients are natural, then the shelf life of such a slime is a maximum of 5 days!

Slime recipe without toothpaste glue

This slime without glue is also very easy to make, since toothpaste used every day, so finding it is not difficult.

For this slide you need:

• Toothpaste. A whole tube of plain white paste without dyes is better.
• Any decoration of your choice.
• Metal bowl for mixing.

Step by step recipe:

• Squeeze the entire tube of toothpaste into the bowl.
• Next, any decorations and dyes you choose are added.
• Thoroughly mix the paste with the decorations so that the mixture is uniform in color and consistency.
• The bowl is placed on low heat so that the mass heats up gradually and evenly. It is very important!
• Constantly stir the future slime for 10-15 minutes, and then immediately remove from heat and let cool for a while.
• When the mixture becomes warm, you can start kneading the slime with your hands. If the slime sticks strongly to your hands, then you can grease your hands a little with sunflower, or any other, oil and continue to knead.

The recipe is not suitable for all pastas. Some pastes do not thicken, if yours is just like this, add starch. Such a slime will not stretch, unfortunately, but it can be crushed and rolled. Photo taken from the Internet, may differ slightly from the result.

Now you know how to make slime without glue and sodium tetraborate.

• If the recipe requires heating the mixture on the stove, then this is done strictly on low heat, so that the heating occurs smoothly and nothing can spoil the future hand toy.
• When using dyes, it is best to add them starting with one drop, as if you go too far, your slime will be colored, which few people will like. The dye can always be added and re-mixed into the slime, and it will not work to remove the excess.
• It is better to store all ready-made slimes in a bag or airtight container so that it does not dry out and thus please you longer.
• Clearly observe all proportions, otherwise the slime may not work out, and you will be dissatisfied with the result.

Conclusion

As many could understand, having read these recipes, chewing gum for hands, slimes or slimes, call it what you want, can be made from almost everything, the main desire! Even if you don't have an ingredient at home, you can always find it in any grocery or hardware store, unlike sodium tetraborate, which is not always available. Try, create and you will definitely succeed!

Find more recipes