Cleaning the dishwasher with citric acid. Cleaning the dishwasher from scale

At first it may seem that dishwashers do not need special care because they look clean for a long time. But in fact, with each washing cycle, working parts are inevitably contaminated with hard water deposits, food and detergent residues. Lime scale and grease deposits gradually lead to breakdowns or inefficient operation. Therefore, cleaning the dishwasher (hereinafter referred to as PMM) is the main condition for its long-term operation.

Let's find out how to clean dishwasher in just 7 easy steps at home. But keep in mind that this is an example full complex procedures, which, of course, do not always need to be performed in in full. In addition, some procedures should be performed regularly, and some only as a problem occurs.

Step 1. Washing the strainer

Let's start with cleaning mesh filter which must be cleaned once a week. After all, a coating of fat quickly forms on it, which clogs small cells, which causes bad smell and most importantly, flow.

To remove the filter, the lower basket is carefully removed and disassembled, as shown in the photo above. It is enough to wash the removed filter under running water with ordinary dishwashing liquid and reinstall it.

Step 2. Cleaning the blades

Now we clean the blades (impeller or rocker arms), which are also cleaned as they get dirty. They can become clogged with food debris or scale. If this happens, then all the blades must be removed and washed one by one, and the holes should be cleaned with a toothpick as shown in the following photo.

After assembly, they should rotate well, if this does not happen, then the axis should also be descaled.

Step 3. We clean the seals

The door seal should be cleaned every 6 months. For this purpose, purchased specialized tool recommended by the dishwasher manufacturer.

  • The space between the pads is easy to clean with a toothbrush.
  • Better not to use folk remedies like citric acid, because because of it, the rubber gasket loses its elasticity, which means that the PMM may begin to leak.

Step 4. We wash the "dead zone" and baskets

At the bottom of the car door is a "dead zone" - water does not enter here, and debris accumulates. This part must be thoroughly cleaned.

The plastic parts of the basket can be easily and quickly cleaned with a brush and dishwashing detergent.

Step 5. Get rid of grease, mold and rust

Now you need to remove all visible dirt, mold, grease and rust:

  • To remove mold, you will need to use bleach. However, this process will be dangerous for stainless steel parts, so it is better not to allow reproduction. mold fungi by drying the machine regularly. To do this, simply leave the door open so that the internal compartment is ventilated;

  • Rust removal. Should be used special remedy to remove rust, but it is also important to understand why corrosion occurs. So, over time, the paint on the baskets may begin to peel off, then you can renew the coating with a special sealant. And so that water with a significant iron content does not enter the device (from rusty pipes, for example), a filter should be installed at the inlet;
  • Ideally, the chamber, door, seals and PMM coarse filter should be wiped every day.

Step 6. Clean the car from scale

To remove scale, it is best to purchase a special tool and run one short washing cycle with it, or, conversely, the most powerful and long mode when maximum temperature- it depends on the chosen cleaner. Of course, the car must be empty.

  • Which dishwasher cleaner should you choose? The most common product is Finish's cleaner. But there are other effective liquids, such as HG, Soda sun, Somat, Topper and Amway remedy.
  • It is not recommended to use citric acid as it can ruin the gaskets. In extreme cases, you can clean the dishwasher with soda and vinegar: pour 5% table vinegar into a regular mug (if you dilute from a 70% essence, you need to add 13 tablespoons of water to 1 tablespoon of the essence), then add there ¼ cup baking soda and put the glass on top shelf(for mugs). And then start the machine in the usual program without dishes.

  • It is enough to carry out such cleaning once every 3 months.
  • The most important advice - to prevent scale, do not neglect the regular use of salt, as it changes the composition of the water and does not allow deposits to accumulate.

Step 7: Wipe the car clean

After the end of the cycle, simply wipe the dishwasher chamber - if any dirt remains, then they should easily move away.

Well, that's it, your assistant is ready for full-fledged work again!

We also invite you to watch the following video about the care and prevention of mineral deposits with salt:

Many of us do not often think about the need to clean the dishwasher. After all, if the dishes get clean, does the dishwasher get clean too? Unfortunately, small debris and leftovers that accumulate over time degrade its performance. If your dishwasher is about to be cleaned, start with Step 1 below.

Steps

Part 1

Deep cleaning

    Fill a sink halfway with water and add 2 cups of vinegar. This is where the dishwasher parts will rot while you clean the bottom and walls. If you do not have vinegar, then take:

    • Lemonade drink. (Do not take those with saturated color as they may leave colored spots. No need to add sugar.)
    • Lemon juice
    • Means for washing dishwashers.

  1. Remove shelves and holders. Two shelves must be removed from the dishwasher, along with dish holders and other parts that are not part of the shelves. If they small size, put them in a sink filled with a mixture of water and vinegar to clean. If they don't fit, rub them with a cloth soaked in the same vinegar solution.

    • Look for pieces of food! If you find stuck pieces of food, pull them out with a toothpick or similar small sharp tool.

  2. Remove any small debris from the openings in the wash carousels. Check that all holes are free and that water flows freely through them. If this is not the case, the holes must be cleaned in order for your dishwasher to work more efficiently. Use round or thin-nosed pliers if you have them, otherwise use a toothpick or similar. Try not to scratch anything if you are using metal tool. Take your time and be careful.

    • If the holes are very small take thin wire and bend it into a hook on one side. Pull through the hole farthest from the middle. Each time you do this, you will extract a small piece of garbage.
    • Alternatively, you can drill a larger hole in the end of the carousel. Clean the blockage with a brush, and then screw a screw from of stainless steel.

  3. Wipe the edges of the door and around the baskets. These places are not washed during the dishwasher cycle. Take a dry rag and a solution of vinegar (or a mild detergent if you prefer). old Toothbrush or another soft brush will help you get into corners as well as under baskets.

    • Don't forget the bottom of the door and underneath! In some dishwashers, this is a blind zone where water does not enter and debris can accumulate there. Wipe this area with a cloth soaked in vinegar. If something sticks, use a brush.

  4. Use bleach to remove grease and mold. Run a wash cycle without the acid cleaners you have used and never mix bleach with other cleaners or dishwasher detergent. Bleach is very hard on both you and your dishwasher, so use it sparingly and only when needed.

    • If the dishwasher has had grease and mold, then leave it fully open for a while so that it dries completely after each cycle.
    • Do not use bleach or bleach-based products if your dishwasher has a stainless steel door and interior walls.

  5. Deal with rust spots. If the water contains a lot of iron or is rusty, you will not be able to control rusty spots. If possible, get to the root of the problem. If the problem is not rusty pipes, the water softener may not remove a large number of iron from water, but its principle of operation is based on the replacement of minerals that are difficult to remove with salts that are easily washed off. There are filters that remove iron from water and if your water great amount iron is worth thinking about installing such a filter.

    Place all parts back in the dishwasher. Immediately after the grate, filter, carousels and all internal parts have been cleaned and small parts wet, put them back where they should be. Or skip to the next part - if your dishwasher is in a sorry state, you can remove its bottom and get down to business.

    Part 2

    Removing the bottom of the dishwasher

    Look around the bottom of the dishwasher drain hole. There should be a grid or lattice around it, under the carousel. Goes there dirty water. Look at the garbage clogging this place. Remove accumulated hard pieces, especially pieces of paper, splinters broken plates, small pebbles, etc. If you think that something has fallen inside, you will have to disassemble the parts a bit to remove all the debris.

    1. To remove accumulated debris, unplug the dishwasher from the mains. Look for an outlet under the sink. Make sure you turn off the dishwasher and not the garbage disposal! To be sure, walk along the cord to the dishwasher.

      • If you don't have a built-in dishwasher, move it aside to find the cord.

    2. Carefully unscrew the screws on the bottom. Don't drop them! The filter cover will lift up to reveal the internal parts.

      • Once you've disassembled this part, take care to remember what and where you shot. Take photos of the process and store the pieces in a safe place in the order you take them. So you will not have any questions during assembly.

    3. Seal the filter inlet with a piece of adhesive tape. This is necessary so that the garbage that you will clean does not get into it. After all, you want to remove the garbage from the dishwasher, and not clog the pipes with it even more.

      Use a rag to remove solid debris and wipe the bottom if necessary. Be careful if you get glass shards. Rubber gloves should be worn.

      • Remove dried-on pieces with a brush or rag. If your dishwasher hasn't been cleaned in a long time, you should use a strong cleaner to remove all the debris that has accumulated over the years.

    4. Insert and screw everything back. The easiest way is to follow the order, the reverse order in which you took everything apart. Do not pinch the screws, especially if they are wrapped in soft plastic parts.

      • To check that everything is working as it should, turn the machine on briefly.

    Part 3

    Daily care

    1. Use your dishwasher regularly. This will help keep scraps and other debris from accumulating inside it, allowing you to clean less often. Sometimes turn it on empty, of course on a short economical cycle!

      Turn on hot water briefly in your sink before turning on the dishwasher. The plates will be cleaner if you start washing them. hot water. You can collect that water to water houseplants. Keep the water running until the tap water is hot.

      Turn on the garbage disposal before turning on the dishwasher. The dishwasher drains water into the same pipe, so the drain must be clean. If you're having problems with your dishwasher, it could be because it's clogged with waste from a garbage disposal.

      Periodically run the dishwasher with vinegar. Pour two cups of vinegar into the bottom of the dishwasher and turn on the economy setting. Halfway through the cycle, stop the dishwasher and let the bottom soak in vinegar for 15-20 minutes.

    2. A full load will save water and electricity, but don't stack the plates too tightly. The dishwasher cleans the plates by spraying them with water, so the water must be free to fall on them.
    3. Wash small items in the basket along with forks and knives - so they do not slip to the bottom. Some models of dishwashers are equipped with special baskets for small items.
    4. Not all dishwasher detergents are the same. Try it next time you buy new variety, To obtain best result. Pay attention to ratings and reviews. Opt for powders and tablets over gels and liquids, and keep them dry so they don't absorb moisture before use.
    5. Wear gloves if you don't want to touch debris with your bare hands.
    6. Wet or spray dried debris with cleaning agent and let it dissolve for a few minutes before wiping. You save yourself the hassle of rubbing.
    7. Do not wash containers with labels that may come off. Remove large leftovers from dishes before putting them in the dishwasher.
    8. Do not get carried away with pre-rinsing. Dishwashers and dishwashers are getting better. If you've never put completely dirty dishes in the dishwasher, give it a try. You will be pleasantly surprised.

      9. Warnings

    • If you are not sure that you can disassemble and assemble the parts, do not unscrew the bottom of the dishwasher. It does not need frequent cleaning.
    • Use products specially formulated for dishwashers, not liquid soap, for example, with which you wash dishes by hand. The dishwasher is designed to spray water from all sides, not to pour it in a thick layer. Soap will just make a mess.
    • Never mix different means for cleaning, especially bleach, among themselves and with other chemicals.

With the advent of a dishwasher in the house, the life of the hostess becomes much easier. There is no need to stand at the sink for a long time, washing a mountain of plates and pans. However, do not forget that such a technique also needs regular cleaning. Proper Care behind the dishwasher will significantly extend its service life, improve performance.


Causes of pollution

main reason dishwasher clogging - leftover food. Even if you carefully remove leftovers from plates, pots, and baking sheets, over time, food particles accumulate. Fat also gradually settles on the details, and scale inevitably appears. All of these have a significant impact on the efficiency of your dishwasher.


When should you wash?

Determining that it's time to wash the equipment is not at all difficult. Your dishwasher will tell you about this. We list the main "symptoms", with the appearance of which it is urgent to begin the cleaning process.

  • Bad smell. If the car emits a strong unpleasant odor that you have not noticed before, do not ignore it. This fact suggests that the structural elements are clogged with grease and debris. The formation of mold fungus on the elements of technology is not excluded.
  • characteristic noise. When the sound of the pump becomes too loud, you should check if the filter is dirty. The quality of washing dishes directly depends on this.


The degree of pollution of equipment depends on many factors. In particular from:

  • degree of water hardness;
  • intensity of use of the machine;
  • the amount of greasy dishes;
  • properties of the detergents used;
  • quality pre-cleaning utensils.


Cleaning steps

In order to wash the equipment as efficiently as possible, it is important to divide the entire process of work into several successive parts.


We do deep cleaning

For this you will need the most simple means. First of all, we take any capacious container, fill it with water up to half, add two glasses acetic acid . If there is no suitable container at hand, you can use a sink for this purpose. In the resulting solution we place the removable elements of the dishwasher. This is necessary so that the parts get wet, and it is easier to wash them from accumulated contaminants.

Instead of vinegar, you can use regular citric acid, soda and even soda(provided that the drink has not too much bright color, otherwise the parts may be stained). You can go the easy way and add a special dishwashing detergent to the water. After that, we deal with the bottom and walls of the car. You can clean them in any way convenient for you (for example, using detergent for dishwashers or stoves).


Dealing with structural elements

We remove the shelves and holders, take out their dishwashers. Further, the algorithm of actions depends entirely on the size of these parts. If the shelves and holders are large enough, you need to clean them separately. Wipe them with a sponge dipped in vinegar. In a situation where the structural elements of the machine are not too large, they can be placed in a container or sink in which other parts are soaked. Particular attention should be paid to the elimination of leftover food. Arm yourself with a toothpick or a thin sharp stick and carefully eliminate them.


Getting rid of accumulated debris

The design of the dishwasher includes washing carousels. They have special holes through which water is drained. It is important that foreign debris does not interfere with the movement of the fluid. You have to carefully check the openings of the carousels for blockages. To make the cleaning process as simple as possible, but at the same time most effective, you will need a wire or a thin skewer, as well as pliers.


You can clean the holes with wire by pulling it through the far hole. It is important to bend the wire thread from one end into a kind of hook. So you can easily remove stuck debris. The other way is more complicated. It involves creating a small hole with outside details. In this case, the carousel can be easily cleaned from the inside with a brush. Most importantly, then you need to without fail close drilled hole stainless steel screw of suitable diameter.


We wipe the rest of the elements

The doors are not washed while the dishwasher is running. The same applies to the space around the baskets. It is necessary to carefully process such places manually. To do this, you will need a brush with soft bristles (a toothbrush will do), a cloth or a sponge. Great option the following cleaning method will be used: wipe the main surface with a cloth dampened with a solution of vinegar or a non-aggressive detergent. And those places that are hard to reach for a rag, clean with a small brush. So you are guaranteed to achieve perfect cleanliness.



Eliminate grease and mold

To do this, you need ordinary bleach. Use it very carefully, do not add too much, do not mix with other detergents. Do not use bleach if the walls and doors of the equipment are made of stainless steel. Run the dishwasher in normal mode, do a few cycles. Upon completion of this procedure, open the doors of the machine and thoroughly dry the equipment inside.


We eliminate corrosion

In most cases, the appearance of traces of corrosion is due to the fact that too hard water with great content gland. Or the pipes are old and rusty. You can soften the water with special solutions However, this method does not always bring the desired effect. There is a more effective method - installing filters that remove iron from the water. This procedure will minimize the appearance of rust and limescale. If spots appear, the first step is to identify the cause of their appearance. Depending on this, it is worth choosing a cleaning method.


In a situation where the integrity of structural elements has suffered due to corrosion, you need to fix this with a special sealant that is sold in any store. Or you can replace the part without waiting for it to completely fail.

We return everything to its place

Once all parts of the dishwasher have been washed and dried, it's time to put them back in their place. If the equipment was used intensively, it is also necessary to clean the bottom. To do this, it is important to disconnect the machine from the mains and remove the bottom, carefully remove all debris and wipe the surface. This completes the cleaning of the machine at home. Now the equipment will work more stable and more efficiently. Before turning on the network, make sure that all elements are dry.


To ensure that you have to carry out deep cleaning of the machine as little as possible, you need to follow simple rules regular care for her.

  • Use equipment for nothing from time to time. To do this, simply turn on the short cycle in economy mode. This will get rid of a significant amount of debris and pollution. Do not forget that it is better to use the machine constantly, avoiding long downtime (equipment breaks down faster if it is not used).
  • Sometimes add vinegar. The process begins with the start of equipment in economy mode. In this case, it is necessary to add a small amount of ordinary vinegar to the dishwasher. In the middle of the cycle, stop the machine so that the structural parts are soaked in the vinegar solution. Then start the cycle again. This method is very good at fighting pollution.


The dishwasher was released to help with the work in the kitchen. Daily cooking and eating involves the subsequent washing of dishes.

Pots, plates, cutlery - all this can be washed in this kitchen appliance. In order for the washing quality to be good and the device not to fail over time, it must be cleaned periodically.

If the dishwasher is not washing dishes very well, it needs to be cleaned. In addition to removing food residues, fat deposits, it is necessary to carry out periodic cleaning from the formation of salts on the elements of the dishwasher.

There are several methods for cleaning the dishwasher from scale:

  • use of special household chemicals for these units
  • using a mixture of soda and vinegar;
  • preparation of a composition of baking soda and hydrogen peroxide;
  • the introduction of borax to remove salt deposits.

This procedure includes the following steps:

  1. The introduction of the composition for cleaning.
  2. Turning on the dishwasher in the maximum temperature mode.
  3. Filter cleaning.
  4. After the end of the cycle, run it again without detergent and dishes for a cycle of maximum duration.

By including the dishwasher in the cleaning mode, the contaminated elements of the device body and heating elements are affected.

Grease, scale on the walls, heating elements, salt deposits in the water supply and discharge system are cleaned. The deposited salts soften under the action of household chemicals and can fall off in pieces, after which it will fall into the filter. It must be cleaned, remove sediment, rinse with running water.

Restarting the dishwasher will give a good rinse of all parts and eliminate the smell of the cleaner.

Descaling with a mixture of water and vinegar

Such a mixture can save the kitchen assistant from mineral deposits on the walls, heating elements, in the water supply and drainage system. The cleaning process with vinegar is as follows:

  1. Put vinegar and baking soda into the dishwasher.
  2. Give time to stand.
  3. Switch on in washing mode.
  4. Clean filter.
  5. Run at maximum temperature.
  6. Wipe all items.

Place a glass of vinegar in the bottom of an empty dishwasher. Sprinkle a small amount of baking soda on the bottom.

Keep the door closed for 5-6 hours, after which they turn it on, without the use of any additional detergents.

The water that is supplied to the washing compartment combines the components of soda and vinegar, forming a composition that allows you to remove scale from the elements of the dishwasher, large pieces of which are collected in the filter.

After the end of the cycle, the filter is cleaned from deposits. Turning it on again will make it possible to thoroughly rinse all the elements inside and eliminate the smell of vinegar. Finishing the walls of the unit will give a dry, clean surface.


Descaling with baking soda and hydrogen peroxide

Baking soda, combined with hydrogen peroxide, makes an excellent tool for getting rid of mineral salt deposits on the heater, water inlet and outlet system, and also on the walls of the dishwasher.

The procedure is as follows:

  • prepare the composition;
  • turn on the car for washing without dishes;
  • rinse the filter;
  • repeat the cycle without dishes.

To prepare the composition, take baking soda - 400 gr., Hydrogen peroxide - 3 tbsp. spoons, 20 drops essential oil. Mix the ingredients and form a ball out of it, which will soon harden. Put it on the bottom of the appliance and turn it on for the longest time without dishes.

The elements will be descaled with a prepared composition with water, the remains of which will be collected in the filter. It needs to be taken out, washed and put back in place.


Brown scale cleaning

This method is mainly used to remove salt deposits from the walls of the washing compartment, the door and the container for appliances, and also become covered with a layer of salt deposits over time. Moisten all processing elements. Apply a large amount of product to the door with a soft sponge, but do not clean, but simply apply.

Treat the walls and containers for dishes in the same way. Leave for 20 minutes, then run the wash cycle at maximum temperature. After finishing, check and rinse the filter, check if the agent remains on the walls and the door. If left, remove excess with a sponge and repeat the process from the beginning again.

After any type of descaling of the dishwasher, the following additional steps must be performed:

  • clean the filter, freeing it from mechanical particles of scale and food debris;
  • wipe the door seal to close. It should not have deposits of mineral salts, otherwise the tightness will be broken. If a mineral deposits present, they must be removed;
  • check for the presence of salts on the surface of the walls of the device, the ceiling part and the bottom. In the presence of deposits - remove;
  • When the dishwasher is running, pay attention to the direction of the water jets in the spray arm. If they go vertically and evenly, then everything is in order. In the event that streams of water go into different sides and have different thickness, the spray arm is clogged with mineral salts. It is required to treat the sprinkler with one of the solutions, and then clean the holes from deposits with a toothpick. Never use a metal needle.


To exclude the appearance of scale on the body, containers for loading, heating elements, specially designed for this purpose are used. chemical substances, softening water and not allowing scale to form.

These substances may be sold separately or may be included in dishwasher detergent. They undergo a special quality test and are completely harmless to humans.

To use them or use folk remedies for cleaning - the consumer decides.

For supporting household appliances for a kitchen in working order, you need to know how to clean the dishwasher at home. The answer to the question must be sought in the instruction manual for the device. The manufacturer lists the detergents and cleaners that are allowed. Budget models, unlike automatic ones, are subject exclusively to manual cleaning. At the same time, you need to remember that you should not rely entirely on automation.

During the first month of operation, the inner surface of the device is covered with a layer of fat. If it is not promptly cleaned, then in a few weeks you will need to contact service center. In most cases, maintenance is carried out using a limited list of substances, the use of which inside the unit will not harm it. Unfortunately, not everyone is in a hurry to get acquainted with it. As a result, the number of equipment failures increases.

The first thing the hostess should remember is that you should not take aggressive chemicals and acids. Even if marked "delicate", the reagent can still damage inner surface. The second rule concerns the amount of substance used. Jewelry precision is the key to long-term health of the dishwasher.

The following tips will help you avoid many problems during the practical operation phase:

  • It is recommended to ventilate the unit after each use - this reduces the rate of formation of body fat;
  • The thicker the layer of fat inside, the less you can dry the dishes;
  • After the end of sanitary measures, the “insides” of the machine must be dried for at least 40 minutes, otherwise mold will form.

Regularity and consistency is the key to the health of the dishwasher. You can get rid of fat with the help of the recommended list of substances. They are poured into a tank specially designated for this, after which the “cleaning” mode is turned on. The main thing is to quickly remove fat deposits that can harm the mechanical elements of the device.

We remove scale: how to clean the dishwasher with citric acid

In countries with hard water, it is impossible to avoid the accumulation of scale, which provokes unplanned expenses. The more of it on the surface heating element the harder it is to heat the water. Automatically, this increases the operating time of the device, causing an increase in electrical energy consumption.

In this regard, regular preventive maintenance of scale formation will save the family budget.

Vinegar, citric acid and special products are used as the main way to remove all traces of deposits from the inside.

If it is not possible to purchase a reagent, then at home you can use the following recommendations:

  1. Use citric acid - you will need no more than 400 g of the product. It is poured into the inside of the machine, after which the standard “cleaning” mode is turned on.
  2. If the house is expensive Bosch model then you need to take care of it accordingly. It is recommended to abandon aggressive acids. The choice is made in favor of delicate methods that allow you to clean the "insides" of the machine. For example, the substance "Antinakipin".
  3. Table vinegar is advisable to use when it comes to budget cars. They contain few elements sensitive to caustic substances.

The use of citric acid and vinegar in any dishwasher is limited by the rules for their operation. It is recommended to carry out care with delicate substances. If cleaning is performed with citric acid, then in this case it should be taken no more than 400 g.

Prohibitions: dishwasher care

Citizens should know that not everything can be sent to the dishwasher. Even a slight deviation from this rule will lead to a breakdown of the unit. Opens the list of prohibited substances wooden cutlery.

Even with minor heat treatment, they forever lose their original appearance clogging the mechanical parts of the dishwasher.

The list continues with decorative glassware, which also does not withstand prolonged water and heat treatment. You can only get rid of fat in manual mode.

In addition, the prohibited list includes the following objects:

  • Ware, including silver or golden inserts;
  • Antiques are only cleaned by hand;
  • Products of arts and crafts;
  • Stainless steel utensils;
  • Dishes made of copper and tin can only be washed by hand;
  • Kitchen appliances incorporating synthetic materials;
  • Crystal products are best cleaned manually;
  • Porcelain in any form;
  • No need to wash plastic utensils for 1-time use.

Before turning on the dishwasher for the first time, it is necessary to carefully study the instructions for its operation. Regarding this list kitchen utensils which must not be placed in the dishwasher. Antiques, pewter, crystal and porcelain items are cleaned only by hand.

Prevention: how to wash the dishwasher

Sanitary and hygienic procedures will not take much time if you follow some rules. You need to pay attention to the hose responsible for the release of water. Every 2 months it should be cleaned with a soft brush and rinsed.

Do not lose sight of placed in the door rubber gasket. With a similar interval, it is also subject to placement under running water.

In order not to have to literally tear off all kinds of dirt at the end of the month, it should be inspected before each washing of dishes. The surface is freed from large and not very food residues, otherwise the mechanical parts of the product will quickly fail.

In addition to the above tips, there are a number of other:

  1. Each machine has a weight limit - an indicator that characterizes the ability of a dishwasher to wash a certain amount of dishes. You can not even slightly exceed it.
  2. Even the most expensive unit will not be able to wash dishes if the wrong cleaning agent is selected. This must be purchased taking into account the characteristics of the dishes themselves, the prevailing types of pollution and the manufacturer's recommendations.
  3. Before starting work, check the sections for the salt of the substance responsible for the formation of gloss. Do not turn on the dishwasher if listed items are in insufficient quantity.
  4. The dishwasher must be cleaned regularly. This can be done manually or automatically, depending on the model. For example, Bosch cars, which are in the middle price segment, can be washed by pressing a few keys. The main thing is to choose a substance recommended by the manufacturer for this procedure. It is better to refuse "folk" methods, otherwise you can lose warranty service.

Ways to clean the dishwasher at home (video)

At least 1 time every 35 days, a test washing of the machine is carried out. To do this, you must take into account all the recommendations specified in the operating instructions. Increased attention is paid to cleaning products and the condition of the dishes themselves. In the first case, the chemicals must correspond to the type of contamination, and in the second case, the dishes before starting water procedures need to be freed from existing food debris.

Fitting © 2022 Design and interior of apartments