How to remove water stain. How to clean limescale: an overview of the best products. Prevention of limescale formation on the sink

The water used modern man in everyday life, differs from the spring. It contains a large number of various harmful substances one of which is lime.

Constantly in contact with such water, spirals and heating elements of washing machines, electric kettles, as well as the surface tiles, taps, bathtubs, toilet bowls are covered with a lime layer. Except that it spoils appearance plumbing, deteriorating quality of household appliances.

Are there effective ways cleaning the lime layer? Of course, there are such ways, and you can wash off the yellow plaque by using household chemicals, which can be purchased at many hardware stores, as well as using home remedies.

How to delete limescale? Handy ways to clean limescale

Industrial cleaning methods are among the fastest, but in addition to the visible effect, they can also cause harm, for example, damage the bathtub enamel. That is why many housewives prefer cleaning contaminated surfaces with less aggressive means. This is especially true for cleaning household appliances.

Any acid will help remove limescale. the main role in this case, it is assigned to "food" acids, which are usually always available in the kitchen of any housewife. The most effective are acetic, oxalic and citric acids.

To clean limescale, you need to use a 5-9% concentration of acids. To do this, a tablespoon of acid is dissolved in 200 ml of warm water. When working with acids, be sure to use rubber gloves.

As additional helpers for removing limescale, hostesses use potato starch and ordinary soda - with their help, you can easily clean the yellow plaque.

You can get rid of the lime layer in a coffee maker or kettle with a small amount of citric acid: the contents of one sachet should be poured into a bowl of water and boiled. It will not be difficult to wait for the water to cool, and it will not be difficult to remove pieces of the lime layer that have lagged behind the walls. The plaque remaining on the surface of the heating element can be easily washed off with a regular sponge.

How to wash plaque if citric acid has run out at home? Lemon can be an excellent substitute, you just need to pre-cut it into circles. Usually, dishes in which plaque has boiled due to hard water are rubbed with lemon and left for several minutes for greater effectiveness. After cleaning, the dishes must be thoroughly washed and rinsed.

Cleaning tiles from yellow plaque

To wash the limescale from the surface of the tile, you must first moisten the sponge with a prepared table acid solution, and then wipe the tile several times.

Plain soda is very effective remedy to remove limescale. This is done very simply: you need to mix soda with water, and a slurry (not a solution) should form, which is applied to the surface of the tile, cleansing is done with a sponge. Wash the cleaned surface preferably with warm water.

Cleaning faucets, sinks, pipes

The most effective way to combat yellow plaque on faucets is table vinegar. With it, you can easily remove both the lime layer and rust. To start cleaning dirty places from limescale, you need to apply a cleaning solution to the sponge, and then wipe the faucets, sink or pipes. If such actions are not enough, you can use a brush for cleaning, then rinse the surface and wipe it with a dry cloth. Joints and hard-to-reach places are easily cleaned with an old toothbrush.

How to get rid of an impressive lime layer? To do this, they make a mixture of acetic solution with baking soda, as a result, cleaning the yellow plaque becomes very effective.

To clean the shower head, you need to remove it and “soak” it for a couple of hours in a preheated table acid solution, then rinse well and wipe it with a dry cloth. If a thick layer of lime needs to be removed from the surface of a non-removable element, it is enough to apply an acetic “compress” on it for 1 hour - a cloth soaked in an acetic solution.

How to get rid of the toilet bowl

How to remove plaque in the toilet? To do this, you should use folk and industrial ways. In order not to spend a lot of time in the future, it is recommended to clean the toilet bowl at least once every two weeks. With a small layer of lime, you can try remedies such as a glass of warm vinegar: pour it into the toilet, after a couple of minutes pour 3 tablespoons of baking soda, close the toilet lid and leave it overnight without flushing. By morning, the layer of lime should be completely dissolved.

How to clear a more impressive layer lime stone in the toilet? In this case, it is better to use special cleaning products, which can always be purchased in the economic departments. How to use them is usually indicated on the label.

How to clean the washing machine from plaque

If during the operation of the washing machine you do not use special means that protect it from the formation of scale, this can lead to premature failure of the machine. But if, nevertheless, scale has formed, you can get rid of it with improvised means, since professional way will cost much more. How to remove limescale from a washing machine? For this you need citric acid Pour out of three sachets into the washing compartment or drum, close the door and set the longest time mode, and select the washing temperature from 60º to 90º.

No need to be scared if loud sounds are heard during washing - these are falling off pieces of scale that make noise when the water is drained. After the washing cycle is completed, it is imperative to carefully examine the washing machine and remove any limescale residues found from the drum, drain and rubber elements.

The condition of the toilet over time will depend on the care of its use. This plumbing fixture needs to follow the recommendations for its operation, so as not to worry later on how and with what to remove limescale in the toilet bowl. Quite often, on the inner walls of the bowl also settles urinary stone.

Causes of deposits

On the rim of the toilet bowl and in drain hole deposits may appear due to infrequent cleaning. Another reason for this is the irregular flushing that occurs in families with babies. Untimely descent of water contributes to the fact that urine on the walls of the toilet turns into a mineral plaque. Its density increases over time, resulting in the formation of a stone. It will not be possible to remove it with the help of a brush alone; household chemicals are also unlikely to help with this.

Excessively hard water with the appropriate chemical composition can lead to limescale. To prevent the formation of plaque from time to time, the toilet bowl must be cleaned with special products and care must be taken to soften the water. The cause of the growth of lime and urinary stone is damage to plumbing. These defects are due to improper operation. For example, if you pour hot liquid into the bowl of the device, then small cracks will appear on its walls, around which plaque will form.

Cleaning and type of coating

If you are faced with the question of how to remove limescale in the toilet, you should think about the type of plumbing coverage. In the production of such products, glaze with different coatings, which can be:

• water repellent;
• anti-mud;
• antibacterial.

These materials have their drawbacks. When using hot liquid, the coating cracks, which spoils the appearance of the device and becomes a source of bacteria. The material is resistant to external influences, but may suffer from acids.

When you are faced with the question of how to remove limescale in the toilet, you should not use abrasive powders and hard washcloths, because this is unlikely to help. AT advanced cases when the pollution is impressive, it is necessary to think about the use of expensive means. Rational option sometimes it becomes the purchase of new plumbing.

Use of household chemicals

If you want to clean plumbing that is overgrown with deposits, you should remove the water from the bowl. To do this, you can use a glass with a handle or a plunger. After you need to use detergents that are applied to the walls and left for about an hour. If necessary, the composition is poured again, and then removed with a brush along with the plaque. If there are old deposits on the surface, more serious compositions should be used.

Lime scale removers like Pemolux abrasive powders provide easy application. Water is scooped out of the plumbing, and the powder is distributed over the surface. It will be necessary to act mechanically on the bowl until the surface becomes perfect. The job is pretty tedious. Another disadvantage of the method is the loss of smoothness of the walls of the toilet. As a result, the coating is overgrown with microcracks, where dirt begins to accumulate.

Cleaning the toilet from a urinary stone can be done alkaline means. This should include Domestos and "Whiteness". The composition contains a solution of caustic soda, which removes the stone. It will be possible to deal with its remnants with a brush and water. The water is pre-drained, the solution is applied to the dirt, and washed off after half an hour. The procedure can be repeated twice if necessary.

Alkali effectively corrodes urinary stone and limescale. In the process of carrying out the work, the tank is blocked, which is especially true when it flows. According to the principle of alkaline compositions, acid-based products act. One of them is Silit.

The use of folk remedies

If you are thinking about how to clean the toilet from limescale, you can use folk remedies. Ordinary vinegar will help in the fight against stone. A glass of liquid should be heated to 40 ° C and add some baking soda and medical iodine to the container.

The mixture is poured into the toilet and left overnight, thanks to which the stone is completely dissolved. When housewives think about the question of how to clean the toilet from limescale, they often resort to the decision to use citric acid. With this tool, you can remove the stone and plaque. Two packs of powder will suffice. The product is poured into the bowl, and the lid is closed. After 3 hours, the stone will dissolve. You will only have to remove it, repeating the procedure if necessary.

As alternative solution oxalic acid appears. Its technical variety is sold in powder form. Before using it, you should read the instructions in order to comply with safety measures. Rubber gloves should be used. The powder is applied to a damp cloth, which should be wiped with areas covered with plaque and urinary stone. If desired, you can dissolve the acid in the bowl of the plumbing fixture and leave it for an hour. Powder in this case will need a little more.

After the cleaning is completed, the plumbing is washed. If you are still undecided about how to remove limescale in the toilet, you can use electrolyte. This method is most effective in the case of old pollution. When performing the procedure, you must use a respirator, goggles and rubber gloves. The electrolyte is poured very carefully, it is important not to splash it. This tool will not work in the presence of plastic pipes.

Strong chemistry in the fight against deposits

Before proceeding with the procedure for cleaning the toilet with potent chemistry, you must read the instructions. There you can find out how much of the drug for a single use should be applied. It is also important to observe the time of action. A person needs to protect the respiratory and vision organs, as well as the skin of the hands from accidental contact with alkalis and acids.

Before dissolving the limescale in the toilet, you should consider whether the product is suitable for household conditions where the piping is made of plastic. Such compositions should not be used for local treatment plants like septic tanks. This applies to liquid alkalis and acids. An example is phosphoric acid in the form of a 7% solution. It can clean the toilet from the stone, as well as free the internal nodes drain tank from corrosion.

For use, pour 100 g of the solution into the tank and the toilet. After 15 minutes, the water is washed off and the surface is cleaned with a brush. Acid has an affordable cost, and does not affect plastic, rubber and enamel. Before you clean the toilet, you must choose a product. One of them is hydrochloric acid solution. This composition is very strong, so it requires some caution. It is forbidden to inhale vapors, and hands must be protected.

The walls are wiped, and then the acid in the amount of one glass is poured into the bowl. In 15 minutes you can rid the plumbing fixture of contamination. After pouring the mixture, the lid is closed. This product is not suitable for toilets connected to plastic pipes.

Use of chlorine

Chlorine is an excellent toilet cleaner. On its basis, many compositions are produced, where “Whiteness” should be attributed. Chlorine-containing drugs are detrimental to health, so their use in recent times is not recommended. But if you still decide on this, then the composition must be applied to the surface, and after an hour, clean the toilet with a brush and rinse the bowl.

tank tablet

When choosing a toilet cleaner, you should pay attention to the tablets that are placed in the tank. They act as a plaque remover and are suitable for the prevention of urinary stones. These products have pleasant smell, disinfect and disinfect the surface of sanitary ware, extending its service life.

One tablet is placed in a bottle. As soon as it begins to dissolve, the water will turn into some shade. If the coloring pigment disappears, this will indicate the need to add a new tablet to the tank.

Use of soda

If you started cleaning the toilet from a urinary stone, then you can use it completely unusual means. For example, Sprite or Coca-Cola. This folk recipe appeared quite recently. It consists in the need to pour one or two bottles of the drink into the toilet bowl. These liquids contain citric acid, which quickly corrodes deposits.

Finally

Plaque in the toilet can appear due to irregular cleaning. To reduce its likelihood or even avoid the formation of a stone, you can use simple tips and funds. It is important to eliminate the leakage of water from the drain tank. In some cases, it is enough to adjust the float.

If desired, you can use tablets, thanks to which deposits will not form, and plaque on the walls will partially dissolve. We remove limescale and rust from the toilet every week with special tools. To do this, the gel is applied to the surface, and after 30 minutes it is washed off.

Before you remove limescale in the bathroom, it is important not to make a mistake with the choice household chemicals. It should be not only effective, but also harmless, both for plumbing and for humans.

Causes and features of the formation of limescale

The culprit of lime deposits is considered to be tap water, more precisely chemical composition. The abundance of magnesium and calcium salts upon contact of water with the surface leads to the appearance of contaminants, which eventually calcine, turn into water stone. Such an education

• has an off-white tint, to which yellowness is added;
• does not dissolve in water;
• almost impossible to remove without special tools;
• can damage the coating.

A factor contributing to calcification is fatty deposits, which are washed off the skin and play the role of a binder for salt particles.

Plaque removers

In the arsenal experienced housewives There are many substances to combat lime deposits. Traditionally, they are divided into special and folk remedies.

Specialized funds

Household chemicals include great amount cleaners that allow you to clean different types of surfaces. It can be creams and gels, solutions and powder products. varying degrees efficiency.

1. Mister Muscle, an effective tool for dealing with stone and rust on various types coatings, including acrylic, cast iron, enamel and ceramics. Available as a gel or spray. The first is applied with a sponge, the second is sprayed on the affected surface. Wash off with water after a few minutes.
2. Silit, another versatile remedy with a small amount of oxalic acid. This element increases efficiency but requires caution when used on acrylic surfaces. Features of the composition allow not only to remove calcification, but also to create protective film preventing its recurrence.
3. Domestos, one of the most effective options for household chemicals, copes well with the effects of calcification and rust stains. Thanks to its thick consistency, it adheres well to vertical walls. Has antibacterial action. Not recommended for acrylic.
4. SanClean, a mild version of the cleaner, at the same time easily copes with stone, allows you to remove layers of grease, rust, and creates a protective film on the treated areas. It has two forms: gel and solution in a spray bottle. A notable advantage of this composition is pleasant aroma and noticeable refreshing effect after application.

The method of application of all options is approximately the same. The selected preparation is applied with a sponge or sprayed over the coating. After a certain time, from several minutes to several hours, it is washed off with water. More detailed instructions instructions for use are usually found on container labels.

Folk remedies

For those who prefer to save on detergent, homemade cleaners are the preferred option. They are cheaper and often just as effective as factory-made competitors.

1. Citric acid, one of the popular substances that allows you to get rid of plaque in initial stage its formation. The application procedure is simple and does not require special preparation. Alternatively, a certain amount of a crystalline substance is poured onto the sponge, the calcification areas are treated and washed with water.
2. Vinegar is another product that is often used as an effective option. Increased acidity has a destructive effect on lime, allows you to remove the stone quickly, efficiently and without negative consequences for the glossy surface. The easiest way is to pour the solution into a spray bottle, treat the dirt with it, brush, wait up to 10 minutes and thoroughly wash the surface with running water.
3. Soda remains a popular option for a cleaner from among the improvised ones. From it you can prepare a solution of a tablespoon per liter of water or apply the powder to a sponge. The rest of the procedure is the same as described above.

These substances can be used alone or combined in various options and proportions, taking into account the characteristics of the coating.

Cleaning cast iron and enameled bathtubs

When choosing a cast iron bath cleaner or equivalent with enamel coated the abrasive properties of the substance must be taken into account:

• cheap household chemicals can effectively remove lime deposits, but it usually contains a lot of abrasive substances that leave scratches that are invisible to the eye, accelerating the formation of a stone;
• the preferred option for such coatings are agents that contain inhibitors, they destroy the stone without damaging the enamel;
• not recommended for everyday use compositions with nitric or sulfuric acids, their single use against an old stone is allowed;

Surfactant-based cleaners are considered the best choice for cleaning, they are relatively easy to remove plaque without harming the base.

Acrylic Bathtub Cleaning

It is not difficult to wash an acrylic bath from limescale at an early stage of its occurrence. Coatings of this type clean well with most liquid preparations. But there are certain nuances:

• aggressive substances such as ammonia, acetone or bleach, of course, will clean the surface, but irreparable damage will be caused to the sensitive coating;
• from the entire list of cleaners, it is advisable to choose those specially designed for acrylic bathtubs, with a corresponding mark on the label;
• regular cleaning is recommended to avoid heavy deposits, once a week will be enough to keep the plumbing clean and attractive.

If for some reason special chemistry is not available, you can use a homemade recipe with a delicate effect. The bath is filled with water at a temperature of about 25 ° C, table 6% vinegar (0.5 l) or citric acid (a bag) is added and left overnight. In the morning, the solution is drained, everything is thoroughly washed and dried with a dry soft cloth.

Removal of old plaque and "water stone"

To remove strong, chronic pollution, sparing measures are indispensable. In this case, you have to take a chance and use potent compounds. A variant of such a cleaner can be a preparation based on whiteness:

• any cleaning powder is brought to the state of slurry with a small amount of water;
• add a tablespoon of whiteness and two of the same spoons of vinegar;
• using a spatula, carefully treat the areas affected by the stone and wait up to 20 minutes;
• with a dense sponge with a soft effect, we clean and completely wash off the remnants of the substance along with the lime;
• The last step is to dry the surface with a soft, dry cloth.

An alternative recipe with similar cleaning properties involves the use of ammonia diluted with water in equal proportions. In the resulting solution, you will need to add Art. a spoonful of citric acid.

The better not to clean

Illegibility in choosing a cleaner can result in damage to even the most durable coating. Therefore, you should always remember the list of substances that are not recommended for use:

• preparations containing aggressive acids;
• powders with pronounced abrasive properties;
• high concentration products.

The latter must first be diluted in the proportions recommended by the manufacturer. In addition to carefully choosing a cleaning agent, you need to seriously consider the search for brushes and scrapers. They should not be made of rough material, for example, you need to completely eliminate hardware. The best choice sponges, brushes, scrapers made of elastic synthetic materials.

How to take care of the bathroom and prevent the appearance of limescale

Never forget that The best way pollution control, including lime deposits, this is their prevention. There are a few simple ways prevent calcification:

• mandatory rinsing after each use;
• regular cleaning at least once a week;
• soak linen and things only in separate containers.

To this list preventive measures filters should be added. This is more expensive, but the costs will be justified by the cleanliness and safety of plumbing. In the future, you will not have to spend much money on its restoration.

We clean the bath from yellow plaque (video):

Bad water, with a lot of minerals, leads to the formation of limescale on some surfaces. Mineral salts are deposited on all surfaces in the bathroom, and they also appear in the kitchen over time.

Agree, it's nice to take a bath and cook in a clean kitchen. Every self-respecting housewife should keep several cleaning products in the house to facilitate the process of removing limescale.

Fast

To quickly get rid of deposits with different surfaces you need to know which cleaning agent to use in each case.

Not all professional chemicals can be used on fragile surfaces such as mirrors, glass or plastic.

It is important to know how to remove limescale from a certain surface so as not to damage it.

off the tiles

For fast cleansing ceramic tiles use professional tools. They are also mold.

Tiled or ceramic tiles are decalcified mainly with gels and sprays. The use of powders is not recommended because it is considered an abrasive that can leave small scratches on a surface.

How to clean mineral salts from tiles quickly?For these purposes, professional tools are used. Mister Muscle, Silit, Comet, Santik will cope well with the problem.

How to remove limescale:

1. Mister Muscle quickly and easily removes limescale. He is able to scrub even an old stone and soap deposits. How to clean: turn the nozzle of the sprayer, apply the substance evenly on the soiled tile. Wait a while, let Mister Muscle soften the calcium carbonate, then rinse everything off with water.
2. Silit not only removes all contamination from ceramic and tile, it leaves surfaces shiny and disinfects. How to wash lime: apply the product to a sponge or tile, rub it. Leave on the surface for at least 15 minutes to remove plaque, fungus and mold. Rinse off tiles with water.
3. Comet, unlike Mister Muscle and Silit, keeps tiles clean for up to seven days. Komet removes 100% of the calcareous calcium carbonate. It cannot be used on natural stones and surfaces sensitive to acids. Comet is applied to the tile with a damp sponge, then washed off immediately. If disinfection is required, leave the product on the surface for 10 minutes.

These professional products do not harm the surface of ceramic tiles. They are recommended to be used no more than 1 time per week, but more often. See how quickly limescale appears.

With mirrors and glasses

Other professional tools are used to remove limescale on glass. These coatings are very fragile and must be handled with care.

For glass surface it is better to buy less aggressive means. They should not contain grains. Buy a creamy or paste-like substance.

How to wash limescale from glass:

1. Sif is a universal innovative substance that can remove any dirt from the surface of mirrors. Sif perfectly washes limescale. The cream returns the original cleanliness and acts quickly. Simply apply the product to the glass and wipe with a sponge. Wash it off with plenty of water. Sif leaves behind a pleasant smell. The bathroom will smell nice with lemon. They can also clean the toilet.
2. Mr. Muscle contains ammonia, so there are no streaks on the glass. It easily dissolves dirt, but if it gets into the eyes it causes severe irritation, be careful when splashing Mister Muscle on mirrors and glass. For cleaning, you just need to turn the spout to the “spray” position. After applying the product to the surface, wipe it with paper.

For do not use a fleecy fabric, otherwise you will have to redo everything.

With plastic and acrylic

For plastic and acrylic surfaces there are also special tools for removing limescale. Such coatings should be cleaned daily, this minimizes the contact of the cleaning agent with the delicate surface.

How to get rid of limescale:

1. Bass is sold in liquid form. It does not damage the surfaces of plastic and acrylic. Bass is easy to apply to the surface with a sprayer. For removing soap scum it can be used daily and washed off immediately with plenty of water. To clean acrylic and plastic from lime, leave the liquid on the surface for 10-15 minutes.
2. Acrylan is also able to clean limescale from plastic. This tool is also used to renovate shower enclosures. The cleansing agent refreshes the bath and protects against the formation of plaque. Acrylan is applied with a spray gun or with a sponge. Rinse off plastic with plenty of water. Acrylan is good and helps to quickly remove mineral stone, but it should not be used at the same time as other cleaners.

wash the lime by professional means won't be difficult. Use them according to the directions on the label and you shouldn't have any problems.

From plumbing

Removing lime deposits from plumbing is also not difficult. There are many ways to clean it at home effectively and quickly.

1. From cranes. Use a vinegar solution. It is diluted with water in a ratio of 1:1. If you removed the tap, then soak in the solution. If there is no way to remove it, soak a kitchen sponge in the product and process it. Rinse the faucet clean water, then wipe dry. To enhance the effectiveness of the solution, you can heat it up and process the plumbing hot.
2. also going to urinary stone and limescale. Easily get rid of it with the help of whiteness. Arm yourself with gloves and a rag, remove all the water from the toilet. Pour the entire bottle of whiteness down the toilet and leave overnight. Rinse off in the morning warm water. Whiteness can be reused if the plaque cannot be cleaned the first time.

If the bathroom has a curtain, the bottom of which is also covered with calcium carbonate, it must be washed.

How to wash? First, soak it in a solution of vinegar, leave it to sour for several hours. Then wash in washing machine or manually.

In the washing machine

In order for the washing machine to last longer, periodically it is needed. This procedure should be carried out every 3 months.

We do not get rid of scale often, so as not to damage the heating elements. Once a quarter is enough. We remove to heating element worked better.

Washing machine will be cleaned soda ash or chlorine, you can also use citric acid or vinegar.

When cleaning equipment, strictly observe all proportions. If you call the masters, they will remove the heating element and clean all the filters, but since it is difficult to do it yourself, especially if there is no man in the house.

It is much more pleasant to wash clothes in a cleaned washing machine.

How to clean from limescale:

1. Mix soda with water in a ratio of 1:1, and process the centrifuge well and rubber compressor. Then wash anything you don't need.
2. Pour citric acid into the compartment instead of powder. Enough 1 pack. Set the longest wash cycle. There should not be clothes in the typewriter, let him work in idle.
3. Citric acid can be combined with bleach. So it will be even more effective and all limescale will be washed off.
4. Cleaning with vinegar is no less good. In a volume of 500 ml, it is poured into the machine. On the device, turn on the longest cycle, then stop work after 6 minutes. Finish washing after 1 hour of soaking.

After treatment with these products, wipe the machine with a dry cloth. The centrifuge should be wiped dry after each wash to prevent remaining water droplets from creating lime deposits on the drum.

1. Ammonia is mixed with soda. Having received a gruel from these ingredients, treat the taps with it. Leave the product on for 30 minutes, then rinse with cold water.
2. Borax is an excellent cleaning agent. It should not be used to remove limescale in the washing machine, but it can be used to process tiles and taps. Also, the drill will remove it from the floor. Mix it with lemon juice to make a slurry and apply to surfaces. Let dry and then rinse with water.
3. Oxalic acid is also great for cleaning plaque. It is used for toilet bowls. Pour acid on dirty places, rub a little with a brush, and leave for a while. The agent should corrode the pollution, one hour is enough. It remains to wash off the acid with water.

Orthophosphoric and hydrochloric acid act similarly to oxalic acid. They are used in the same way.

Thanks to whitewash, the walls become cleaner and whiter, it disinfects and. During processing, it can get on the floor, and you can remove it using the same ammonia or storms.

How to prevent?

Preventing calcium carbonate formation is easier than looking for ways to get rid of it.

Simple steps can help you keep your plumbing, kitchen, and bathroom clean.

Preventive measures:

• clean faucets and plumbing once a week;
• use a brush;
• do not allow leakage of the drain tank;
• use special tablets.

Thanks to the adoption of preventive measures, you do not have to think about the question of how to get rid of it.

As you can see, there are many ways to remove it. Decide for yourself which remedy to choose folk or professional, but know that the first is safer (especially if there are children in the house), and the second removes plaque faster.

Before resorting to the removal of limescale in the bathroom and other places, you should definitely understand the features of this event. It's no secret that in Soviet times special choice did not have. Citizens were offered classic cast iron bathtubs, metal and faience plumbing. However, things are different now. In the profile market, you can look at products made of steel, porcelain, acrylic and even plastic. Each of them requires special care.

For different types coatings - different cleaning methods

Therefore, it is imperative to know that the elimination of plaque can be achieved different ways. Each type of plumbing and other equipment subject to the formation of lime deposits should undergo its own cleaning method, which will be as safe as possible.

You also need to understand that you can not use some tools, tools and methods for cleaning limestone.

Enamelled cast iron

Initially, we will consider methods for cleaning such products, which, despite the significantly expanded range, are still in special demand. They are reliable, durable, in addition, they have a relatively low cost, especially compared to acrylic bathtubs.

In this case, everything is very simple - the strength of cast iron allows the use of a wide range of drugs. If the bath is not too dirty with lime, you can try to wash it conventional means for dish washing. It can be liquid or gel. Apply it to lime deposits, then carefully wipe with a sponge and rinse. You should get a satisfying result.

If the pollution has already managed to eat deeply, you will have to look for another solution to the problem. This will only help special remedy from limescale, which is sold in the departments of household chemicals.

Enamel bath is easy to clean with liquid or gel

Before buying it, be sure to study the composition. Inexpensive products do not contain so-called anti-corrosion inhibitors - substances aimed at protecting enamelled surface baths from the occurrence of corrosion processes. It is strongly not recommended to buy them, because together with lime you simply remove and protective covering. Negative consequences from this will be noticeable after a short period of time.

Cleaners with inhibitors remove only the deposits themselves, without damaging the enamel. They are more expensive, but the result is much better.

If you plan to clean your tub once a week, then powerful means for high-quality removal of limescale, it is better not to use. For this there is special products containing surfactants. In addition, preventive cleaning can be performed using the same dishwashing detergents.

Acrylic

Bathtubs made of acrylic have appeared on the domestic market relatively recently. However, their popularity is already on enough high level. The main advantage of such products is high decorative properties. They are much more beautiful than heavy cast iron models. The acrylic surface is distinguished by its smoothness, which makes it relatively easy to clean.

But when working with this material, care must be taken. Firstly, it does not tolerate the effects of powders and other products that have an abrasive structure. They can damage the surface of such bathtubs, due to which characteristic scratches will appear on it. It is also strictly forbidden to use drugs based on aggressive chemical substances– chlorine, acetone, ammonia, etc. They are capable of corroding acrylic.

If cleanliness is maintained acrylic bath, regularly wiping it with any kitchen detergent and a soft microfiber cloth, then no deposits will even appear here. But how to remove limescale in the bathroom from this material, if it has already formed, and in large quantities? Here, first of all, you need to choose special store funds. To pick them up today, focusing mainly on the possibilities of your own budget, is not difficult at all. Please note - the package should say so: for acrylic surfaces. All other drugs should be ignored, even if someone advised them to you.

Acrylic bathtub cannot be cleaned with abrasives - only with gentle means

Sometimes you don’t want to spend money on buying household chemicals. In such cases, you can try to solve the problem with home remedies, for example, universal. It will effectively remove plaque, and this will not require complex measures. It will be enough:

• fill the tub with lukewarm water;
• pour two or three sachets of citric acid there;
• leave everything as it is at night;
• in the morning, drain all the water, then rinse the tub and wipe it dry.

If the lime contamination is too severe, another method can be used. Take 3 sachets of citric acid, pour it into suitable capacity then add 4 tablespoons of water. Next, mix the solution thoroughly, soak a soft sponge in it and wipe the contaminated areas. It is possible that this process will need to be repeated several times. The final stage- rinsing the bath.

These can be taps, sinks, other plumbing fixtures, as well as utensils - for example, a kettle, a saucepan, etc. Here you can solve the question of how to clean the metal from limescale, using improvised means. It is absolutely not necessary to run to the nearest household chemicals store.

As we have already figured out, you can remove limescale in the bathroom with citric acid. The same applies to dishes. Dial the input into it and pour in a bag of acid. After that, put on the stove and bring to a boil. Let the water cool and you will see that the gray coating has fallen off the walls and bottom, making it easy to remove. If it is still present, rub it with a sponge.

As an alternative to citric acid, ordinary lemon has proven itself well. Cut it into several parts, then rub the contaminated dishes for 5-10 minutes (depending on the complexity of the plaque). Next, rinse the metal thoroughly and dry.

Concerning metal surfaces relating to plumbing, it is advisable to use vinegar here. With it, you can clean the sink or taps as quickly as possible, and without any damage. It's very simple - apply a little vinegar to the sponge and wipe the contaminated area. If there is too much plaque, add baking soda, which will significantly increase the efficiency of this cleaning method.

Removable parts and structures can be soaked in an acetic solution, after adding oxalic or citric acid there. Do not forget to thoroughly rinse the metal after the procedure so that not a particle of acid remains on it.

On the tile, limescale also appears quite often. Considering that the area ceramic decoration in the bathroom or in the kitchen can be very large, this causes serious inconvenience. Luckily, cleaning bathroom tiles isn't too difficult.

However, it must be remembered that there are certain limitations. For example, it is recommended to clean the tiles in the bathroom or in the kitchen with pasty or creamy products. No abrasive particles, as they are guaranteed to leave on smooth surface pottery ugly and noticeable traces. It is also necessary to take into account that mold often joins the plaque, which traditionally develops in the seams between the tiles. Therefore, it is desirable to simultaneously remove plaque, as well as fight pathogenic microorganisms.

Most the best solution to clean the tiles in the bathroom - these are chlorine-based products. Such cleaning preparations not only effectively remove lime deposits, but also contribute to the removal of pathogenic bacteria. If it is not possible to purchase such a tool, replace it with ordinary table vinegar.

Tiles are best cleaned with creamy and pasty products.

To make it easier to work, pour the vinegar into a container with a spray bottle. Treat the entire area of ​​ceramics, then brush it with a brush. Then wait about half an hour, and rinse everything thoroughly with water. The final step is wiping dry. To do this, you can use a regular cloth or, much better, a microfiber cloth.

Glass and plastic

Bathroom tiles are easy to clean. And what about glass and especially plastic surfaces? As a rule, in most cases the standard soap solution, for example, based on . But this is if the pollution is not too serious. If the situation is not happy, try to solve the problem with the same vinegar or citric acid.

It is easiest to remove limescale from plastic and glass. These materials have a dense structure, and there is simply nowhere for lime to be absorbed. If you choose store-bought products, give preference to creamy and gel-like preparations, but in no case abrasive, as they can damage the surface.

Now you know how to effectively and quickly clean limescale. There are actually a lot of methods. Choose carefully suitable way, focusing on the type of surface that needs to be cleaned.