How to unscrew the interior door handle. How to remove and disassemble the door handle of various types - procedure

To do this, you first need to determine what type of door handles yours belongs to. By type of device are distinguished:

• push - those that you need to press to open the door;
• rotary - which, accordingly, need to be rotated. They are also round or knob-knobs;
• stationary - handles mounted on the door leaf.

Lever handles are suitable for installation on metal or interior door. They can be equipped with an integrated locking mechanism or be part of a lock.

Swivel handles have a locking secret on one side and a latch on the other. Most often placed on the door of the bathroom or toilet.

Stationary - mounted directly on the door, instead of a lock, they are equipped with a roller mechanism to securely fix the door in the closed position.

How to remove the push handle

The push handle complete with the lock is most often installed on the entrance metal door. The reason for its replacement may be a broken rod inside the handle. Although all door hardware is installed by the door manufacturer or retailer, removing and replacing such a handle is not particularly difficult, using a minimal set of tools.

If the handle is broken, then first use a screwdriver to unscrew the screws that hold the decorative or protective strip. An unsecured handle can be easily removed from the rod. Then, using pliers, grab the protruding edge of the rod and pull it out.

If the handle is not removable, you need to find the locking element on it. This can be a small screw that needs to be unscrewed, or a pin that, when pressed at the same time, removes the handle.

The new handle is installed in the reverse order to which the dismantling was carried out: the oiled rod is inserted into one part of the handle and the door, then the handle is installed on the back of the door and fixed. Do not forget about fixing and protective gaskets. Attach the padlock to the door.

How to remove the handle on a plastic door

The handle on a plastic entrance or balcony door can be easily removed without resorting to the services of specialists, if there is no damage to the locking and regulating mechanisms.

To do this, you need to pull the protective bar under the handle, turn it 90º. Under it you will find screws, unscrewing which the handle can be easily removed. New fittings must be used from the same manufacturer so that the fasteners and holes on the front door and the operation of the mechanisms that regulate the various positions of the web has not been disturbed, if we are talking about balcony door.

After inserting the rod and fixing the handle, the protective bar must be installed in place.

How to remove the push handle on an interior door

The interior door lock is most often inexpensive, since it does not have such requirements for reliability as for the operation of the lock on the front door. Therefore, their operating period is short.

Interior door handles often have a built-in lock. If you did not notice any violations in the operation of the latch, you should not completely change the lock, you can try to get by with replacing the handle.

The principle and sequence of replacing the lever handle on interior doors is similar to the steps for dismantling the front door handle. For free access to the internal mechanism, it is necessary to remove the handle, initially unscrewing the fixing screw or rod with a small screwdriver.

Next, find a small hole in the trim strip and pry it gently with simple knife. This must be done carefully, as the bar is made of thin metal and can be easily deformed. If the bar is held on by screws, they should be unscrewed accordingly. By removing the bar, you will have access to the four screws that connect the two parts of the lock handle. Unscrew the screws and remove the mechanism from the door leaf.

To insert a new handle, reverse the steps for the new mechanism.

How to remove a round knob

Removing a knob or round handle on an interior door is as simple as removing a push handle. The difference lies in the differences in the elements fixing the handle. In lever handles, the pin must be unscrewed. And the round handle can be removed by finding a technical hole on it, in which there is a spring-loaded latch. To handles knobs in the kit should go special key, inserting which into the technical hole you can press the spring latch. If the key is not found, use a small nail.

Often, due to incorrect assembly, it is not possible to find the spring element in the hole. If this happens, then the decorative flange is not installed correctly and you need to do the following:

• remove the decorative flange by prying it with a knife;
• turn 180º so that the spring clip is in the service hole on the flange, you will hear a click.

Now, while pressing the locking element, pull the handle - it can be easily removed. After removing the decorative panel (flange), you will have access to the fixing screws.

As you can tell, removing and replacing a knob or lever is fairly easy. You can safely perform these steps yourself. If we are talking about a violation of the operation of the entire locking mechanism, of course it is better to contact specialists who will professionally repair or replace the lock.

The main function of door handles is to open and close doors. In addition, aesthetically executed fittings become an adornment of the door leaf and part of the interior of the room. Today construction stores offer the widest range of a wide variety of models that differ in shape, design, style, quality, material, price.

To prevent doors from opening under the influence of air vibrations, door handles with a latch lock are used. There are several important requirements, the main of which are versatility, serviceability, ease of operation.

Types of door handles

By design, door handles are divided into three types:

Pressure. A feature of this variety door handle is that the latch is actuated by a certain pressure on the door handle. In this case, the lock tongue moves to its inner (hidden) part, as a result of which the door opens with ease. Fittings of this type perform a rather decorative function, since such locks open with ease. For this reason, they are used to temporarily close doors.

Stationary. Such door handles are a common fixture that is installed in door leaf, not equipped with a movable mechanism. These handles can only operate the door. The most popular type of stationary handles are staple handles. They are perfect for doors, the main purpose of which is to delimit the area (interior doors). This element makes it possible to pull the door towards you when opening or perform the opposite movement - to close the door.

The kit may also include door latches. But with the help of such a device, the door can only be opened if there is a roller latch. In this design, it is better to choose reliable and firmly installed products that can withstand power loads.

Handles-knobs. Basically, such fittings have a round shape, and inside they are equipped with a rotary type of lock. Turn the handle to open or close the door. Door products of this type are used for interior doors. Knob handles can also be installed on toilet and bathroom doors. If you need not just closing the door, but also restricting access, it is better to choose rotary handles with a latch or button located in the center, thanks to which you can lock the door from one side.

Door handle installation diagram

The main types of locking device are:

Latch with lock Latch without locking
Latch with lock and key

For ease of use, the handles on the doors should be installed at such a height that when opening the person's arm at the elbow bent at a right angle. A distance of about 70 mm must be maintained from the edge of the door to the handle. The specific value is determined depending on the locking mechanism. .

If a malfunction is found in the operation of the door handle, it is necessary to determine its cause. To do this, it must be removed. You can do the work yourself. You will need an adjustable wrench and a screwdriver.

How to disassemble a door handle

The door handle is disassembled in the following sequence:

1. Using a screwdriver, unscrew the screws holding the lever on both sides.
2. Pull the device out of the door.
3. Unscrew the lever with wrench and remove the coiled spring rotary mechanism from a pen.
4. Carefully inspect all elements to determine the cause of the breakdown and further action.

You can disassemble the round door handle using a special key with an emphasis, flat and Phillips screwdrivers. The sequence of actions is as follows:

1. From the side on which there is no key, it is necessary to pry and remove the door handle cover with a latch (work is carried out using a flat screwdriver).
2. Press the opened stopper while pulling the handle towards you - this way it can be easily removed.
3. Using a screwdriver, it is necessary to open both screws and remove the two untwisted parts of the round handle from the door.
4. The screws holding the latch are unscrewed, after which they can be pulled out of the door leaf.

How to remove the door handle

To remove the handle, you first need to find out what design it has: plain or with a latching mechanism.

How can I remove the round knob

Handle replacement

If the door handle breaks, it must be replaced with another one. First you need to inspect and determine the design, and then carefully remove it from the door leaf. Layer old paint must be removed and the surface treated with sandpaper. Then you can go to the store for the appropriate model.

When choosing a handle, it is necessary to take into account all the features of the door: whether there are putty holes on it and whether new fittings can close them. Based on the selected design, the assembly is carried out in the reverse order of the above methods for removing the handles.

It will be useful for any owner to know how to disassemble the handle on the door, especially the interior one. This fitting is subjected to a serious test by all tenants, so someday it will fail, and it will need to be replaced with another one. In this case, you do not need to call specialists, you can handle it yourself, while saving on the employee's wages. Moreover, this business does not require great skill, but only a little skill. The dismantling process may differ depending on the type of handle, but the whole process should not cause any particular difficulties.

How to remove the handle from the interior door? Before proceeding with the analysis of the mechanism, you need to find out what kind of classification it belongs to. The division is based on several criteria. The one described below is suitable specifically for parsing a pen, because it has a classification according to design features.

Varieties of handles

Press. Such a handle is attached on both sides of the door leaf and has L-shape. Opening occurs due to the load on the handle, after which the tongue is set in motion. The disadvantage of this fitting is that it is very traumatic.

Swivel. The opening method is the same as that of the push, only the tongue is set in motion not by pressing the handle, but by turning it. Such models are often not very convenient, because to scroll it, you need to have your hands dry, otherwise they will slip. When replacing them, a reasonable question arises about how to unscrew the interior door handle.

Stationary. This handle does not have a latch. It is attached with screws directly to the door leaf. It happens one- or two-sided, while it has an axial connecting element.

Reasons for parsing a pen

It is not so difficult to disassemble any of the models of door handles, because they have a similar design.

At the same time, it is extremely rare to carry out the analysis of this fitting. What reasons can lead to this? How to remove the handle from the interior door?

The first reason is breakdown. It occurs most frequently. Often, inexpensive Chinese models are prone to breakdowns, which are not designed for a constant and rough load. If the prevention of some elements is not observed, then the fittings become unusable. It should be repaired, and sometimes the entire element should be replaced.

The next reason is the need for replacement. Every year the market is replenished with new and improved models. At the same time, you can choose color scheme suitable for the interior, or put a new, more functional and reliable model.

Renovation in a room often involves a change in style. Do not ignore the door handles. Therefore, the question often arises of how to disassemble the door handle.

Another reason is spoiled appearance. If the part is made of low-quality material, then scuffs and scratches will be visible on it very soon, which negatively affects the entire interior.

Removing the push handle

How to remove the handle from an interior push-type door? This mechanism is more difficult to disassemble, because in its design there is an axis rod, due to which the handle is held. It is tightened with a tetrahedron.

The process of parsing the handle must begin with the removal of the plugs around it. They are fastened with screws or tightly pressed. They are very easy to remove with a minus screwdriver.

On one side of the door, you need to unscrew the fittings and remove. Then the second part is removed, on which the axis rod remains.

If the handle is with then it is also removed.

Following the sequence and accuracy will allow you to remove the mechanism without problems, without damaging the parts and without creating unnecessary hassle.

How to remove the handle from the interior door rotary with a rosette?

When in fittings rotary type there is no hole on the side into which you can insert a key or a screwdriver, then the elements are separated manually. Both parts of the handle should be turned in different sides and gradually remove from the thread. On one of them there will be an axial rod.

In this way, the socket is removed and the screws are unscrewed. When the axis is removed, you can do the following elements - a latch or lock, if necessary. When removing decorative parts, you need to monitor the use of your strength, because overdoing it can damage the elements.

Removing the rotary knob

The handle with a lock for interior doors of a rotary type is removed as follows.

This will require a key to clamp the spring mechanism. Often it is not included in the package with the product, but it can easily be replaced by a nail or other thin object.

The first step is to remove the decorative plates, which can simply be pry off with a sharp object.

Use a wrench or nail to move the spring-loaded pin by inserting the tool into the technological hole located on the side. At the same time, pull the handle and remove it together with the cap.

After that, you need to move the fastening screws located on the plate. Then the two parts of the handle can be removed together with the axle.

Assembling the round door handles back is not difficult, only all steps must be done in reverse order. First comes which is fixed with a plate, then an axis is inserted, fasteners are put on it. Decorative inserts are mounted last. The main thing is not to forget that the decorative flange is first threaded, and only then the main part of the handle is attached.

Removing the fixed handle

How to disassemble a fixed type door handle? They are the least likely to break or deform. This is due to the lack of moving elements in it. Often, door handles of this type are not repaired after removal, but are changed entirely. The withdrawal process is as follows:

1. Self-tapping screws are unscrewed with a screwdriver.
2. One part is unscrewed from the rod, and the second is removed along with it.

This design may not have a central rod, which greatly reduces the process. You only need to choose the right screwdriver to unscrew the screws of a certain diameter.

Removing the latch handle

First of all, when dismantling the latch handle for interior doors with an automatic lock, you need to remove the screws with a screwdriver. Next, unfasten the overlays. Use to unscrew the rod.

After that, pull out the rotary mechanism wrapped in a spring.

popular way

There are several ways in which the latch handle for round-shaped interior doors with a latch is removed. Here is the most popular one.

It is necessary to remove it with a screwdriver, first from the part where the latch device is located. It is necessary to press on the opened stopper and at the same time pull the handle towards you.

Then the latch is pulled out, for which the screws are unscrewed, after which the latch is released.

Thus, disassembling any door handle with your own hands is not a big problem.

Round door handles, called knobs, have many advantages - they are easy to use, quite reliable in operation, their cost is relatively low. Finally, these handles are unified - their replacement is simple: remove the knob, insert a new one and use it to your health - landing dimensions match even if the handle is made by another manufacturer.

Without a doubt, in most cases, the actions do not look so categorical - it is not a replacement that is required, but only routine maintenance, you need to lubricate the lock or latch mechanism, or correct something. But before performing these works, the handle must be removed. There is nothing difficult in this process, you just need to know what to do - our illustrated guide will make it easier to remove the round handle without damaging the doors and, which sometimes happens, the palms.

Removing the round handle

Round knobs may have different design and they are removed different ways. One of the most simple options displayed on the image. Explanations, in fact, are not required - we unscrew the two tightening screws, after which the handles with the entire mechanism can be removed. And by unscrewing the screws from the end side of the door, it will be possible to remove the latch.

However, sometimes not everything is so obvious - there are round handles with a button and decorative elements that hide the mounting screws. To gain access to them, you need to remove the outer part of the handle, fixed with a special button, and then the decorative trim.

How to remove a round knob with a button

The buttons that fix the outer part of the handles can also be structurally different - sometimes they are clearly visible, in other cases only a hole is visible. Our task is to find the release button and press it. Go!

On the handle INTERNAL SIDE doors we find a button or a hole under which it is hidden. If the button is not visible under the hole, then you should turn the handle in different directions, achieving the alignment of the hole with the button.

Having gained access, we press the button with an improvised object - a nail, a thin screwdriver, etc. Having sunk the button, remove the outer part of the handle, scrolling it a little from side to side and moving it away from the door (pulling it towards you).

Note. Sometimes it takes a lot of force to push the button in, especially if the handle is oxidized or clogged with compressed dust. When applying pressure, be careful - the tip of the screwdriver can easily come off the button and scratch the handle. It is easy to trace the further path of the screwdriver - it will stick into the palm or finger of the other hand holding the handle.

The outer part of the handle was removed (its slight oxidation is noticeable in the photo), go to the next step.

Now I need to take it off decorative element in the form of an overlay hiding the fixing screws of the round handle. To do this, pry it with a thin metal object- a steel technical ruler, a screwdriver with a wide but thin tip or a similar object. Prying should be done very carefully, trying not to scratch or damage the coating of the door leaf. It is advisable to place a metal thin plate under the prying object - a blade, for example, and only then remove the decorative overlay. You can fix the plate on the door leaf with electrical tape or tape.

Note. Some types of pads have special places for removal in the form of recesses into which the tip of a screwdriver is inserted. If the notches are semicircular, then it is desirable to pry off the overlay with a round object - in extreme cases, with a Phillips screwdriver. Typically, removable seats are located at the bottom of the decorative trim, and not on the side.

Having removed the decorative trim, all that remains is to unscrew the screws that tighten the lock ladles. The handle has been removed.

As additional information note that the above method removes the vast majority of knobsets both with round shape handles, and with bracket-shaped. The button shapes in the images are the most common, but they can look different.

Another option for a button.

And this form is...

And this one too - in the form of a bracket ...

Do-it-yourself installation of a lock with a latch on the door is within the power of almost every man who knows how to use a tool. In this article, we will tell you how to mount and disassemble a door handle with an integrated latch yourself. In addition to textual information, the material is provided with a video that will help you better understand the work process.

How to disassemble the latch handle and dismantle the lock

Door handles with latches are convenient in everyday life, are installed on the entrance and interior canvases. The mechanism can be push (classic L-shaped version) or rotary (in the form of a ball or socket).

To disassemble the push-type locking mechanism, you must first remove the handle. On the side or bottom on it, you need to find a recessed screw and unscrew it with a screwdriver (in some cases, you will need a hex key). Then the decorative overlay is removed. Most often it has a thread, and this is easy to do. Having removed the panel that hides the fasteners, you can unscrew the main bolts holding the mechanism. Next, the lock plate is unscrewed from the end side of the canvas. The lock can be easily removed by pulling it towards you.

The process of disassembling the device with a rotary round pen differs little from actions with a push mechanism. In some models, the ball is threaded, you only need to hold the second handle motionless by turning the part to be removed in reverse side. Sometimes manufacturers supply mechanisms with screws hidden in small recesses, as in pressure devices.

In some models, you need to find a small hole on the handle. Having found it, we turn the ball so that in this recess we see a button (stupor). By pressing on it with something thin, we pull the handle towards ourselves. Often the kit comes with a special key for this. Decorative protection in such models it is usually removed if you simply pry it off with a knife or screwdriver.

Installing a Latched Door Handle

Installation is divided into several mandatory steps:

1. Determining the installation location and marking.
2. Drilling holes.
3. Mechanism fastening.
4. Box preparation.

Having determined the height of the location, mark the center of the handle. Next, the place for the latch is marked. To do this, determine the middle of the end of the door, apply the lock as it will be mounted, outline the tongue. To work, you need to prepare the following tools:

• Drill;
• Screwdriver;
• Chisel;
• A hammer;
• crown on wood;
• Feather drill;
• Spiral guide drill for wood;
• Square;
• Line, roulette.

To drill a hole for the mechanism, a wood crown is used. First, one side of the canvas is drilled, then the other. If you immediately make a through hole, then decorative coating on the opposite side may peel off. The drill must be held at an angle of 90° during operation.

Important! For most standard models locks with latches, a feather drill with a diameter of 22-23 mm and a 50 mm wood crown will do.

The hole for the tongue is most conveniently drilled with a pen drill with a guide. The speed of the drill should be minimal, you need to work carefully. A mechanism is inserted into the resulting hole and the location of the plate is marked. In order for the lock to be located on the same plane as the end of the door, excess wood is chosen with a chisel.

The mechanism is installed in place, the plate is screwed under the latch. A square is inserted, the design of the handles is assembled, everything is tightened with screws. The last step is screwing decorative panel that hides the fasteners and firmly tightens the locking screw.

Advice. In order to screw parts of the lock with a latch without distortions, the screwing points are first marked with an awl, then drilled with a thin drill. In this case, the screws go into place easily and correctly.

To mount the reciprocal hole in the box, you need to close the door, leave a small mark from the latch on the jamb. You can smear the tongue with oil for this. Having outlined the place, we apply the overlay that comes with the lock, circle it along the contour. We drill a hole for the tongue, deepen the bar, then fasten it.

Installing a door handle with a latch with your own hands is not difficult, if you take your time and do everything carefully. Almost every model has an instruction, it will not be superfluous to familiarize yourself with it first. By following our advice and manufacturers' recommendations, any House master will do a great job.

How to disassemble the door handle knob: video

Door handle with built-in latch: photo