Intercom factorial open. How to open an intercom without a key: non-standard methods and secret codes

You can use the secret combination that is in every intercom Quite often there is a problem when the keys to the intercom are lost or forgotten, however, there is a way out, this is the input of a special code that was set by the manufacturer of this intercom device. All details below.

Understanding how to open an intercom

An intercom kit is necessary in order to ensure security in the entrance of an apartment building, since criminals usually wait for the victim in open, unprotected entrances to get into the apartment. Also, the intercom ensures order and cleanliness in the entrance, as it scares away lumpen and outcasts.

Each company producing this product, competing with other companies, strives to secure its device and develops management software that is different from others, naturally, by entering its own combinations of numbers

You need to know that entering a special pin code with mercenary intentions is punishable by law.

Modern intercoms have not only the ability to communicate, record a conversation, but also video surveillance, which gives 100% security. Many intercoms are equipped with a special code so that you can open (if you forgot or lost the key) in emergency situations (unlock), as well as a loud emergency notification system when people are evacuated from the building in case of fire, earthquake and other situations.

When using the intercom, the following instructions should be followed:

1. When leaving the entrance, you must press the button under the screen and wait for the sound signal, only then exit.
2. When entering the entrance, it is necessary to lean the key-chip against the reader panel of the intercom device when the sound signal(impulse), you can unlock the front door.
3. After leaving or entering the entrance, you can not help the door close, it will close itself with the help of a hydraulic closer.
4. If you push and help the door close, this can lead to damage to the door closer.

The main components of the intercom are: company name plate, call block, primary power supply, independent unit switching, an independent electromagnetic lock that magnetizes the magnet to the door plate, door closer, call button, apartment blocks, keyboard.

Intercoms are divided into multi-subscriber and low-subscriber, according to technical device, multi-wire and two-wire. In the age of new technologies, there are intercoms that receive and send a signal using Wi-Fi, based on optical fiber.

Do not panic if you do not have the keys to the intercom with you, or it has become demagnetized, the encoding has flown off (recoding and programming is required). You can deceive any intercom using a universal key-chip, which is available to ambulance doctors, police, workers post offices(postmen), employees of house management, Internet communications (Rostelecom). These keys are made in the form of a special tablet, radio key fobs, two-pin key and are legally issued to employees of special services.

Method description: how to open a Metakom intercom

Intercom Metacom domestic production is used for apartment buildings for protection from unwanted guests. What to do to open the intercom, is it possible at all?

Intercoms produces a lot various firms both in Russia and around the world. Therefore, they do not have a single (universal) set of necessary numbers

The main thing is not to break the screen, but to make (restore) the lock by entering a combination.

To open a Metacom intercom without a screen, you need to dial a special combination consisting of several numbers and letters. Firstly, press the button responsible for the apartment number - B. Secondly, dial the code 5702.

If the intercom does not open, then you can try to enter the codes:

• 64434;
• 1256;
• 1256;
• 4978.

If the intercom Metacon of the MK-20M / T series, forward or Pro, then you must enter similar combinations or a pin code (B + 27, B + 5702). It takes a very long time to go through all the codes and you can either wait for someone to enter or leave the entrance, or call the neighboring apartment and say that you are a neighbor and forgot the keys. And remember that the use of all fraud with mercenary or robbery intentions is punishable by law.

Example: how to open an intercom Visit

Intercom Visit is one of the most reliable devices and is adapted to such harsh conditions as low and high temperatures, wind, rain. The body of the intercom has anti-corrosion coating which ensures reliability.

"VIZIT" is factory set to 12#345 or *#4230. But recently released models can be opened by entering 67#890 or *#423

The intercom of this model works in a humid climate. Average term operation - about 10 years.

Intercom Visit in case of emergency can be opened with a special code, you should log in to its menu and dial #999. After 2 beeps, enter 1234. You need to wait a bit and after a short beep, dial 2#3535.

If, after entering the combination 1234, there was no short signal, but a signal similar to a two-tone or others was heard, then other combinations can be entered:

• 6767;
• 3535;
• 12345;
• 11639.

After the dialed combination, you must enter 2#3535. Actual for the following models: Vizit N-100, Vizit SM-100, Vizit BVD-341, Vizit BVD -313 and others.

How to open a Cyfral intercom

Digital has many models: Digital INTEL, Digital CCD-20.40, Digital CCD-40TC, Digital CCD-2087.2TV, Digital CCD-2087.2T, Digital CCD-2087.2T R, Digital M-10MR, Digital M-10MT, Digital M-20MTV, Digital M-20MZV.

To open intercom Cyfral, you need to have a special master key or know the password

For a Cyfral intercom of a regular model, for opening without a key, you must enter the following numbering:

• Call + 100 + 2323;
• Call + 200 + 2323;
• Call + 300 + 2323;
• Call + 400 + 2323;
• Call + 500 + 2323;
• Call + 600 + 2323;
• Call + 700 + 2323;
• Call + 800 + 2323;
• Call + 900 + 2323;
• Or choose the following combination Call + number + 2323 or 7272, 7273.

To pick up the code, it takes time, it is better to call a neighbor in the apartment. For the Cyfral M intercom, it is easy to open using the combination Call + 37 or Call + 3792. The Cyfral intercom of the CCD-2094.1M series is opened by the code Call + 0000, after which ON will appear on the display, you must enter 2.

If these operations do not work, then the factory access code was changed by the housing and communal services employees.

If you are with a tenant of this house, then you can get the access code from them if the key has been lost. The intercom of the Cyfral CCD-2094M model can be opened by dialing the combination 0000 + call, after the entered cod will appear on the display. 123456 + call, if it does not work, enter 456999 + call, or 123400 + call, after that f0 appears on the intercom display, then enter 601.

Hacking the intercom model Rainmann (Rainmann) 2000 is possible by entering the combination - key + 987654, after a double intercom signal, enter 123456, after which P appears on the display. The letter P on the display monitor indicates that you have entered the service menu, in which you can carry out control with numbers and program the code with your own hands.

Enter a single number:

• 4 - block and disable the Rainmann intercom;
• 6 - turn off Rainmann;
• 8 - open (the door is demagnetized).

Rainmann CD-2000 and AO-3000. In order to open the 2000th model, you must click on the "key", then enter the code "987654". After that, the intercom will beep and you must enter the numbers "123456". If the engineering menu is available, the “P” icon will appear on the screen. Now, to unlock and open the door - you need to press the number 8

The intercom of any DomoGuard model can be opened by entering the combination C + 669900 + call + enter a number 1 more than the number of the last apartment in the entrance. After typing combinations, F will appear on the intercom display, which will mean access to the service menu. After that, dial the code 080 to enter into the intercom memory new key 2, 2, 2. To disable the door lock - 071.

Instructions: how to open the Eltis intercom

All Eltis intercom models open after entering a special combination, however, if the entered combination does not open the door, then the factory settings have been changed. Intercom Eltis (Eltis) can be opened by entering universal code with which the protective device can be deceived.

You need to press and hold the call key for 20 seconds. For a while, a five-digit code will appear on the display of the equipment. Then this combination will disappear, so you need to remember it. This password will allow you to enter the settings menu

• Call + 973;
• Call + 7456;
• Call + 2323.

With the same combinations, in which the call button is pressed at the beginning, you can open the following types (access intercoms) - Tekhkom, Stroymaster, Marshal, Belsplat (Belsplat), Kamsan, Condor, Lock, Poly, Filman, Polylock, Smartel, Laskomex, Modus, Polis and others.

Intercom code

Intercom brand Factorial different models can be opened without a key by entering a special access code to software– 000000 + 123456, 5 + 3453475 + call + 7 + call.

Houses equipped with intercoms are found everywhere, but not many people know how to open them without a key.

The Keyman intercom can be opened by entering - K + 100 + 789, after the signal has sounded, enter 123456. After displaying the Keyman R on the display, which allows you to enter the menu, enter 8. If the intercom has a touch screen, then in winter it can be opened by application of a snowball to the screen, hypothermia can ruin the intercom.

It is also possible to open the device using the piezoelectric element of the lighter, which is applied to the place for the key, but this does not always work and is weak.

Intercom Barrier II, 2M and 4 can be opened by pressing 2 + 4 or 2 + 7. You can also magnetize the place where the key is applied and magnetized with a magnet. In the same way, you can open the Arkades intercom with an empty plastic key.

The intercom Raikmann and Rainmann and Smartel can be opened like this:

• Key + 321654;
• After the beep, enter the numbers 123456;
• When P appears on the display, enter 8 or recode with a shocker or stun gun, which, with its impulse, can turn off the intercom device.

The Blink intercom is the only audio intercom installed in Belarus, Ukraine, Kazakhstan and you can open it with a D9-0.1, 6F22 battery, which we put in a turnkey place. And the intercom Cron, Pirrs and Safe can be opened using the factory combination 951. The intercom pier 1000 Micro can be opened using the factory access code - 12345678 + K + 1234 or 8310649 + entrance number.

You should know: how to find out the code from the intercom

Intercom is the most reliable device for guard multi-storey buildings, garages and private houses. The occupants of the building or the owner of the garage must know the password and secret codes for emergency opening of the intercom. This password is used if the intercom key has been lost or forgotten.

If at the entrance you find that there is no key to the intercom, first of all it is better to contact the neighbors

If the key to the intercom is lost and the password has been forgotten, it is not possible to open the door, then you need to call the housing and communal services, service or company, a single service center who installed this intercom device so that the master could unlock combination locks. Remember that unauthorized entry and hacking of the intercom at the entrance of the house in foreign territory is responsible for their actions.

Why is it not worth entering codes and physically trying to open the intercom without a key? There is an instruction where it is written that it is strictly forbidden during the operation of the intercom to cause any mechanical damage to the call unit, handset, electronics unit, electromagnetic lock, opening button and intercom housing various items, which can lead to damage to the device or its individual elements.

Mechanical damage also includes wiping with snow, dousing with water, heating with fire, dousing with paint and other solutions, using a magnetic key with an electromagnet, tearing out buttons, repairing the device yourself or coding it.

It is forbidden to independently perform recoding, unlocking or other actions by a person who is not an employee after-sales service intercom device. Do not pull the door behind you, which can lead to breakage of the hydraulic closer. The closing speed of the entrance door is set by the master, depending on design features doors and adjusting screws.

How to open an intercom without a key (video)

In conclusion, it is worth noting that it is forbidden to put under the door from the inside and outside foreign objects, which prevent the self-closing of the door and lead to unauthorized entry of strangers into the territory.

Entrances are trying to protect from outside penetration. This was done not only for the purpose of preserving the finish. staircases, but also that there was no free access to the apartments. Sometimes residents of the entrance cannot find their magnetic key, and familiar neighbors are not at home to contact them. In such situations, a certain set of buttons will come in handy as a “master key”.

Protecting the modern home

Firms producing intercoms provided in their creations the possibility of using a digital code that plays the role of a “magic key”.

Note! Use a "digital master key" if necessary, since the introduction of an electronic key for other purposes is punishable by law.

Different equipment has combinations, there is no common code. Let's analyze popular brands security public access lock:

• Vizit (Visit);
• Metacom (Metakom);
• Cyfral (Digital);
• Forward (Forward);
• Eltis (Eltis);
• Factorial (Factorial);
• Marshal (Marshal);
• Lascomex (Lascomex).

And do not forget that there is always the opportunity to call neighbors who know you, asking them to help in this situation, so as not to remember or write down the code. You can not use master keys, as they will disable the entire mechanism.

Important! After entering the "universal master key", for some time the electronic entrance lock will no longer function correctly.

How to open a Vizit intercom (Visit) without a key

Vizit (Visit) produces a variety of modifications of equipment designed for many and few apartments. The former are used for 200 apartments, the latter for private ownership, for example, mansions or summer cottages.

All models come with regular firmware, so before changing the code, it opens with a common set of numbers. There are several opening methods:

• *#423;
• 12#345;
• 67#890;
• *#4230.

If there are no “*” and “#” buttons on the equipment, dial “C” and “K”.

In addition to dialing numbers, it makes sense to use the features of the equipment menu by dialing #999. When you hear two intermittent signals, enter 1234, if it does not pass, then try to dial: 0000, 9999, 3535, 12345 or 6767. The correct entry will confirm the opening of the "high-rise building".

And the last way:

• Cash in on "2" and expect a little.
• Then, on "#" and also wait a bit.
• Enter "3535" and the entrance will open.

To exit the equipment menu, press "*".

Please note that models where there is no screen or LEDs are more difficult to open. Required special key. Or hold down "1", then try the code. Such a "miracle of getting" into the entrance does not always happen.

How to open a Vizit intercom (video)

How to open a Metacom intercom (Metakom) without a key

Metacom (Metakom) produces digital modifications, where there is a panel and a processor, with a built-in power supply. One device can store up to 508 IDs. In addition to opening with an individual key, there are also "universal digital master keys".

First opening option:

• press "B";
• enter the number of the first square. at the entrance (usually the numbering is above the door leaf);
• again "B", "code" will appear;
• dial the digital key 5702.

If these actions did not give the desired result, here are a few more options:

• 65535V 1234V 8.
• 1234V 6V 4568.
• V 27 V 5702 (for model MK-20 M/T).
• В 1 В 4526 enter an empty identifier for the reader into the equipment memory.

The video below shows the options on how to get to the entrance.

How to open the intercom Cyfral (Cifral) without a key

For Cyfral devices (Digital) no unified system keyless opening.

There are not so many ways:

• Where there are apartments with a number of 100 (200, 300, and so on), the code is applicable: B - square number ending in 00 - B - 2323, 7272 or 7273.
• If there is an “M” marking, then dial the following: B - 41 - B - 1410. There are models where it is enough to enter 07054.
• With the designation "CCD" - 2094.1M, try B - 0000. If after the combination the door did not open, but the inscription "ON" appeared, press "2". When the inscription “OFF” appears, it makes no sense to enter standard codes, since they were replaced by installers.
• With the designation CCD - 2094M, you need to dial 0000 - B. Then, the inscription "cod" will appear, where you need to click on the numbers 123456 - B or 456999 - B. You can apply another option: 123400 - B, after the appearance of "F0" add 601.

Here is a video of the opening of the 2094.

How to open the intercom Forward (Forward) without a key

Electronic locks from Forward (Forward) can often be found in our homes, so common codes can come in handy. Here are some sequences:

• K - 557798 - K (K is the key, it can be in the form of an image);
• 2427101;
• 123*2427101;
• K - 1234.

Use the menu and add a key. Press sequentially on 77395201 * 0 *, apply the key that is, and twice on "#".

Here is a video on the topic:

How to open the intercom Eltis (Eltis) without a key

For Eltis devices (Eltis) there are simple combinations of numbers and buttons:

• B - 100 - B - 7273;
• B - 100 - B - 2323.

For some modifications, the Cyfral intercom codes (Cifral) given above are applicable.

Here is a list of opening options in the video:

How to open the intercom Factorial (Factorial) without a key: codes for opening

There are few digit sequence options for Factorial equipment. Try typing 000000 or in ascending order from one to six. There are situations that the opening is not feasible, since it is required to change the cipher.

You can dial 5, you will see “180180” on the screen, click on the call - 4 - call.

Below is a video tutorial:

How to open the intercom Marshal (Marshal) without a key

Quite popular in Russia is the Marshal brand (Marshal), designed for a large number of premises.

There are simple combinations, but the "wonderful" penetration into the entrance does not happen every time. First enter the number of the last square. at the entrance + 1. For example, the last 60, then dial 61. Then two options: K - 5555 or K - 1958.

How to open the intercom Lascomex (Lascomex) without a key

The last company on the list is Lascomex (Lascomex). These devices are not uncommon in door leafs high-rise buildings in Russia. The equipment has a unique feature - a four-digit code is set during installation. Write it down and enter: B - No. kV. - figures for the entrance.

Second option:

• Alternately press the "0" and K buttons four times in a row.
• Click on 6 four times.
• "P" will appear, enter 8.
• After 60 seconds you will be able to enter.

In order not to constantly enter numbers, remember the codes, reissue the standard magnetic "opener" for the entrance door.

Finally

Intercoms are installed on almost all entrances, so everyone faced the situation of the absence of a magnetic key. Try to call familiar neighbors first so that they open the door.

If no one is at home, enter the special code corresponding to the model and manufacturer of the equipment. Sometimes it may not work, then you have to wait until someone else opens the front door.

You may also be interested in:

Video intercoms for a private house: nuances and pitfalls

Nobody wondered why we lose or forget apartment keys at home? This happens not because of forgetfulness, but "thanks" to the constantly accelerating rhythm of life. We are late for work, later for lunch, then home ... and approaching the entrance we understand that there is no key, relatives will not return soon, and this is again a waste of precious time. The old woman neighbor had a spare set, but she does not use the intercom, and, as luck would have it, no one comes into the entrance. What to do? Today we will tell you how to open an intercom without a key, depending on the model and manufacturer.

Read in the article

What is an intercom and why is it needed

An intercom is a lock on the entrance door, combined with an electronic intercom, connected to the apartments. opens electronic key or a special code that is known only to residents. An outsider dials the number of the apartment of interest, by clicking on the numbers on the panel, when he is answered, he explains the purpose of the visit. If the owner of the apartment considers it necessary, he will press the button on the home device, the entrance lock will be unlocked.

Residents of houses say that after installing the intercom, the entrance became cleaner. However, the loss of the intercom key becomes a problem. Not everyone remembers the code - why in the head extra information. But knowing some secrets, such a problem is quickly solved.

Take note:

The principle of operation and the device of the intercom

Regardless of the type of intercom connection (coordinate or digital), the principle of its operation is the ability of the visitor and the owner of the apartment to hear each other. In fact, this is a telephone through which the called subscriber can give a command to open the entrance door without leaving the apartment. Once you figure it out, the system is simple.

The device's memory contains data about apartments, codes in case of emergency opening. This is necessary for access to personnel of service companies, special services ( Ambulance or the police). The codes can be used by postmen serving the house. Each device is programmed individual code However, no one can remember everything. And that means there must be simple ways opening. We will talk about them today.

The main ways to open the intercom without a key

There are many ways to solve this issue:

• The first thing that comes to mind is a forceful solution to the question of how to open the intercom door without a key. But this can only happen if the lock is quite old (the magnet does not hold well) and you are not a fragile girl. Putting your foot on the bottom of the door (necessary to skew the magnet), we sharply pull the handle towards ourselves. It turns out rarely - the strength of the magnet reaches 400 kg, but it's worth a try.
• The second option is to wait. Neighbors will come or go sooner or later. If this is your entrance, then you will be allowed into the house.
• Third. We call any apartment, introducing ourselves as a public utility worker (electrician, plumber, but you never know who). If you get on a not too vigilant neighbor, it can work out. But these were methods with the prefix "if". The next option is more reliable.
• Applying codes. We will talk about them today. We recommend that you clarify the brand, model of your intercom, as well as remember the desired combination of numbers so as not to get into a similar situation.
• The right way is to call an employee of the service company who will open the entrance with his key. But for sure it will take time, which is often not enough in such situations.

Do-it-yourself universal key from the intercom: is it possible?

Let's start with the fact that, as such, there are no universal keys (suitable for all doors) in nature. There are keys for devices of the same brand, which you cannot make yourself if you do not own the necessary equipment. You can carry a huge bunch with you, but where is the guarantee that at least one will fit desired door? The universal intercom key is a complex electronic device that requires complex programming. Returning to the beginning of the conversation, remember that we have already lost one key, which means we can lose the second one. Why do we need him then? Better we will tell you how to open any intercom without the use of keys, programs, and other electronics.

Comment

Electrician of the 5th category LLC "Petrocom"

Ask a Question

“Don't pick codes at random. AT best case you will learn a lot about yourself from your neighbors, at worst, you will disable the intercom by erasing the programmed data.

How magnetic locks of well-known manufacturers open

There are 11 main manufacturers of such devices, it is not difficult to remember the codes of each. But this topic is for "lovers" to lose their keys. It turns out that memorization will be reduced to one. Let's list the manufacturers:

• Visit;
• Forward;
• Cyfral;
• Eltis;
• Factorial;
• keyman;
• blink;
• Domograd;
• T Guard;
• rainman;
• Metak (Metacom).

Each device has its own codes.

How to open the Vizit intercom without a key: codes and one interesting way

If you do not remember the code, consider interesting way how to open the Vizit intercom without a key. But let's be clear, it doesn't always work. You will need a piezo lighter, which is not a pity to disassemble. We take out an element from it, after which we beat with a spark into a metal plate, to which a magnetic key is applied, 5-6 times. Should help.

Now the right way how to open the “Visit” intercom without a key - codes. Devices of this brand are of two types, old or new. Let's start with the old one. We type the command on the panel: 12#345. If the command failed, then *#4230.

If the device is new, there are more options. We list:

• 67#890;
• *#4230;
• *#3423;
• 12#345;
• #196.

This is a standard set of options, but the master could change them. Then you have to enter the menu.

Important information! Entering the services menu is regarded as hacking the system. When typing an incorrect command, the data on the magnetic keys of the owners are erased.

Dial #999. 2 signals will be heard, after which we enter the code 1234. One signal - you are in the menu, two - you should not tempt fate, it is better to wait for the neighbors. If it succeeded, one signal sounded, dial 2 - pause - # - pause - 3535. The door is open. Be careful with this team. By pressing a four instead of a two, we delete the keys from the memory, the three programs a new one.

How to open the Forward intercom without a key: it's simple

This brand has a simple secret. We find a small hole near the reader. Having inserted a paper clip or wire into it, we open the door without any problems.

Intercom "Cyfral": how to open it without a key

There are two options here, depending on the model. First, let's figure out how to open the Cyfral CCD 2094.1m intercom without a key. We dial the command B - 0000. If the door does not open, we look at the scoreboard. "ON" is highlighted - press 2, go in. If “OFF” is on, nothing will work, the codes have been flashed.

Now how to open the intercom "Cyfral" CCD 2094M. Dial sequence: 0000B, "cod" appears on the screen. Now 123456B, or 456999B. Did "f0" appear on the screen? We press 601, we go.

As you can see, the question of how to open the “Cifral” intercom without a key is not so complicated.

How to open the Eltis intercom without a key: 4 simple codes

If the question arose of how to open the Eltis intercom without a key, we proceed as follows. B - 100 - B - 7273. If it didn't work out, then change the last digits to 2323. Third code: B - 41 - B - 1410. Fourth: 07054.

We open the Factorial intercom without a key

The problem with the device of this company is the mandatory change of factory settings by installers. But it's worth trying. We dial 000000 or 123456. If this does not help, press the key 5. A service message appears on the screen - 180180. Press Call - 4 - Call.

If these actions are unsuccessful, then the codes have been changed. How to open an intercom without a key is known only to the master who installed the device or the utility workers serving this house.

"Keyman": high-tech and sophisticated devices

These devices are distinguished by the reliability of protection against outside interference. If the company that installed such equipment did not cheat, which is extremely rare, then the factory codes have been changed, it will not work to open such a lock. According to statistics, no magnetic keys opens 10%. But it's worth a try. Perhaps you will fall into this percentage.

We dial Call - 100 - 789. We wait for the sound signal, we dial 123456 - 8.

Another option. Call - 170862 - sound signal - 0. If it was not possible to open the door, then nothing can be done. There are no codes to change the firmware. It remains to call the master from the company that installed the intercom and wait.

Features of the device "Blink": an interesting system

There is no keyboard and display on devices of this brand. Use such equipment in entrances where there is a concierge. But you can open it. To do this, we need a Krona battery (9v). We find 2 false bolts at the bottom of the device, to which we apply the contacts of the battery. The passage is free, welcome! This is the simplest intercom we have listed today.

How to open the Domogard intercom without a key: another fortress has fallen

Such devices open in 99% of cases. Press the "C" key. We are waiting for the sound signal and enter the combination 669900 and the Call key. The last action before entering the menu is to dial the number of the last apartment in the entrance, adding one to the number. "F" lights up on the display. We are on the menu. Two options. If you need to add a key, dial 080, open the door - 080.

Simple steps to open "T-Guard" devices

Here you need excellent reaction and motor skills of the fingers. We do everything quickly. Pressing the Call button - immediately 00000 - immediately Call. If the actions are slow, then nothing will come of it. In this way, 100% of such devices are opened.

Opening "Rainmann": attention is required

If there is time, the touchpad can be frozen. We apply a lump of snow for 15-20 minutes. The door opens. But this is too long, which means again "favorite" codes. We press the image of the key and enter the combination 987654. A beep sounds, after which we dial 123456. The letter “P” appears on the screen. Now press 8 and the path is clear.

Important information! When you press digit 4 instead of 8, the doors will be blocked - you will have to call the wizard. If the number 6 is entered, the device is turned off. You should not experiment, you will not hear kind words from neighbors for this.

How to open the Metakom intercom without a key using codes

Everything is easy here. We dial Call - 1234567, or 65535 - Call - 7418378. Another option: Call - the number of the first apartment of the entrance - Call - 5702.

"Metacom" - only 2 options and you are at the entrance

Summing up

Not all intercoms open freely after entering a certain combination on the panel, but most of them cannot resist this. Don't break your device. This is fraught with communication with the police and a decent fine. However, the door will not open. It is worth thinking - "do you need it"? It is better to work with your head (not to be taken literally). Virtually none of these devices will stand against knowing person more than 5-7 min. But do not open the first vending door. Today's information is provided for those who have lost or forgotten their keys. Be law abiding.

We hope that the information presented today will be useful to our readers. Questions, if they arise in the process of reading, can be left in the discussions. Our team will definitely answer them. We are waiting for your posts with a description of personal experience.

By tradition, at the end of the article a short video

02/24/2016 02/11/2018 by Why

Everyone knows that utility workers open the intercoms of a huge number of houses without carrying around a huge bag with the keys to all these devices. They use the entrance to the programming mode, in which opening the door is far from the most difficult function.

Manufacturers do not pay due attention to the complexity of access to the program mode, resulting in ordinary person, who does not have special professional skills in the field of programming electronic devices, it becomes possible to carry out keyless access to the entrances of residential buildings equipped with intercoms.

This article is intended for using the information in an emergency situation, when it is impossible to open the door with the key (accident, accident, etc.).

Intercom Opening Visit

Intercom systems trademark Vizit are installed most often at the entrances of apartment buildings. The question of how to open an intercom without a key is relevant for people who cannot get into their own home. For keyless access to the entrance, you must enter a special code on the call panel that will allow you to gain access. When entering the code, you should take into account the version of the installed model.

Provided that the installers did not make any changes to the initial settings, we sort through the following codes:

*#3423;
12#345;
67#890;
*#4230.
If the intercom does not respond to these codes, you need to go to the service menu. To do this, the combination # 999 is dialed on the call panel and after 2 short beeps- the code. Again, there are many variants of this code: 1234 (standard), 0000, 9999, 3535, 12345, 6767. If the code is entered correctly, the device will respond to it with 1 beep, and in case of an error, it will give 2 beeps.

Once in the service menu, you can perform the following operations:

Open the door. To do this, enter: 2 - (pause) - # - (pause) - 3535.
Add your own key: enter 3 - attach the key to the place of reading - # - wait for the beep.
Completely delete all keys from the internal memory: press 4.
To confirm the changes, you need to press #, and to exit service menu – *.

Opening of the intercom METAKOM

Three ways to open METAKOM intercoms:

1. Press the call button - enter the number of the initial (first) apartment in the entrance - press the call button again - the word COD will appear on the display - enter 5702.
2. Enter 65535 - press the call button - enter 1234 - press the call button again - enter 8.
3. Lead 1234 - press the call button - enter 6 - press the call button again - enter 4568.

Opening of the intercom METAKOM MK - 20 M / T

The intercom of the same company opens somewhat differently - METAKOM MK - 20 M / T

You can disable it in 2 ways:

1. Press the call button - enter 27 - press the call button again - enter 5702.
2. Press the call button - enter 1 - press the call button - enter 4526.

Opening the intercom Cyfral

Two opening options:

1) If there is a mark "M" on the intercom.
Press: 07054, or - call - 41, or - call - 1410.

2) If there are three-digit apartment numbers.
Call - apartment number (100, 200) - call - 2323; 7272; 7273 (one of 3 numbers).

Opening of intercom Eltis (ELTIS)

There are only 2 similar ways to open intercoms of this company:

Press the call button - enter 2323.

Press the call button - enter 7273.

There are no other ways, if you didn’t succeed, then either you are doing something wrong, or Eltis has modified its devices and protection schemes.

Opening the intercom Keyman

The most problematic in access.
1) K - 100 - 789 - short sound - 123456 - 8;
2) K - 170862 - short sound - 0.

Opening Barrier II, 2M and 4

These are very old models of intercoms. And that is why they are often still found in the old nine-story buildings and five-story "Stalinka". In new buildings you will not find such a 100%.

In the models "Barrier 2" and "Barrier 2M" to enter the entrance, you must press the buttons "1" and "3" or "1" and "0". Sometimes you can open the door simply by moving the magnet around the place where the keys are applied. For the model "Barrier 4" universal keys Or no codes at all.

Rainmann and Raikmann intercom codes

Despite some similarity in names, Rainmann and Raikmann intercoms are completely different devices. Raikmann devices are resistant to burglary and opening without a key using the code on them is impossible. But the Rainmann CD-2000 and AO-3000 models are found.

In order to open the 2000th model, you must click on the "key", then enter the code "987654". After that, the intercom will beep and you must enter the numbers "123456". If the engineering menu is available, the “P” icon will appear on the screen. Now, to unlock and open the door, you must press the number 8.
It’s better not to reap anything else - you can cut down everything and rake “by the hat” from the residents.

Another life hack that users have noticed is the reaction of the touch keyboard to hypothermia. If you roll a snowball, attach and hold for 15-20 minutes, then there is a chance to open the door.

Opening intercom Factorial

The setup of intercoms of this brand is very, very similar to the already familiar Tsifral, with the only exception that when installing the device, it necessarily requires changing the master password and therefore it is considered that it will not be possible to open it. Although it may turn out to be a hacking option through the engineering menu. To do this, you need to dial the intercom code Factorial. In most cases, these are used:

000000
123456

Another option is to press the "5" button and hold it for 5-6 seconds, then type this:

180180 + "Call" + 4 + "Call" key.

Opening of intercom Laskomex (Laskomex)

To open the door on Laskomex AO-3000 VTM, try entering the keys:

1 + "Key" + 8976
66 + "Key" + 1989

Didn't fit? it means the code was changed during installation.

To enter the service menu, press the key 5 times, after which a password entry field will appear. By default, this is used: 1234. Most often, it is changed during installation, but there is still a chance. The code P8 is responsible for opening the Laskomex AO-3000VTM door.

Opening the DomoGuard intercom

A rare guest in our high-rise buildings. It is extremely rare.

To open the door of the Domogard intercom, make one long press on "C". After it makes a sound, quickly enter the code:

669900 + "Call" + number of the last apartment in the entrance plus 1

After that, the screen will display the inscription: "F-". We are inside the service menu! You can then use one of the following options:

080 - Open the door
333 - Remember new key
071 - Disable door lock

Opening the intercom Blink

This is not access intercoms, but individual, used most often in private homes or where there is a concierge. There are no universal codes for it.

Opening the intercom T-Guard

Another rare model. There is only one single hack option:

"Call" + 00000 + "Call"+"Call"

The last two calls must be pressed quickly and the access intercom will open.

Opening of the intercom Forward (Forward)

There is very little useful information on Forward intercoms on the network. There are only three well-known universal keys that have been unearthed:

123*2427101
K+1234
2427101

In order to program your key for the door under "Forward", you can try to enter "77395201"+"*"+0+"*". After that, we apply the key tablet and press the "#" twice. If the code "77395201" did not work, try this one: "5755660".

Opening the intercom KS-intercom

There is very little information on how to open the KS-intercom. The only code I could find:

"K" + "377" + pause + "698" + "K"

There is also information that sometimes the code works:

"K"+0000
"K"+9999

Or:

"K" + 0000 + pause + 98
"K" + 0903 + pause + 98 + pause + "K"

Unfortunately, they don't always work either.

Opening of intercom Techcom

There is information on the network that it is not so easy to open the door of Techcom. In some cases, the following may work. Be sure to need a key to such an intercom. We hold down the three buttons "1", "6" and "0". After that, we release one by one. We start with "0", then "6" and "1". A signal will sound. Here we enter the default pass - "4321". If the password is right, click on "Challenge", then on "3" and again "Challenge". We bring the key and the door will open. I myself have not tested this method, I cannot vouch for it.

Opening the intercom Impulse-DS

There is very little information on Impuls-DS intercom models. Possible options:

"1234" + "C"
"B"+"99911"+"B"

The first option almost never works, because. the code will definitely be changed when the device is installed.

Opening intercom Berkut

Access intercom Berkut LS 2001 is the only model of this manufacturer on the market so far. From itself, it is a simple device based on an oscillatory circuit, which is assembled on a resistor and a capacitor. Universal codes

"key" + 123456 + "key" + 5150C
"key" + 123456 + "key" + 206C
"key" + 123456 + "key" + 6140С
"key" + 123456 + "key" + 2589C

Also, you can try to make your own master code. To do this, we type the command: “key” + 23456 + “key” + “XXXX” the “F” icon will appear. Now click on "9" and "key". Then you can enter your 4 digits.

Opening intercom Marshal (Marshal)

To open the intercom Marshal, you need to enter a number equal to the number of the last apartment in the entrance +1, and after that - “K” + “5555”. I.e:

"Number + 1" + "K" + "5555"
Works once.

Opening of the intercom Pirrs (Piers)

In the entrances there are models "Pirrs 1000 Micro", "Modern" and "Lux". Factory master code for all three types:

"12345678"
"K"+"1234"

For the Pirs 1000 Micro model, the key may also work:

"8310649" + "entrance number"

There is evidence that these models of audio intercoms allow you to put your own code. It is done like this:

Enter the master code "12345678". If it has not been changed, an audible signal will sound. Press the door opening button, and without releasing it, press the number “5” on the keyboard. The confirmation tone for entering the settings should sound again. Release the door open button. Now you need to enter your code - 987, for example. The main thing is that there should be no more than 8 digits. Moreover, the sequence of the first two digits should not coincide with the master code or apartment number in the entrance. After finishing entering the code, first click on the "star" and twice on the "grid". After that, the intercom can be opened with the code: "987" + "*".

Attention! If you tried to apply the code indicated in the article for your intercom and it did not work, you do not need to write angry comments. I make no guarantees. What works in one entrance is not at all the fact that it will work in another. In addition, installers have become smarter lately and, having eaten enough problems from juvenile hackers, they began to change passwords and master codes.

Almost all apartment buildings equipped with an intercom system. Getting into such a house is extremely problematic if you do not have a reader key or you do not know the pin code. But what if you can't get into the house late at night? In such cases, it is possible to open any device famous brands the introduction of a certain combination.

Ways to open the intercom without a key

The lock opens with a key

There are many manufacturers of intercom systems. But almost everyone has weak spots in system. How can the following be used?

• Taser. Many people ask: is it possible to open any intercom with a stun gun? The door should open as follows. To the reader outer panel bring a stun gun and make a discharge. There is a possibility that the system will think that this is a key and open the lock, and there is also a possibility of a complete shutdown of the system, and then no one will be able to use this panel.

Non-standard way

• Another way is to influence the reader of the device. This is a piezo element from a lighter. Bring it to the reader and click. Chances are small, but still they are.
• Under there is a magnetic lock. If you hit hard in this area, then the grip of the magnet should loosen.
• How to open the intercom with the help of force? First you need to press hard on the door, and then sharply pull it towards you.
• More simple and tricky way. It works best during the daytime. Wait for someone to leave or enter.
• Dial the number of any apartment and politely ask to open. It is possible that some resident will believe that you are his neighbor, enter into your position and open the door for you.
• Enter a special combination, a kind of key to all doors.

The last of the options seems to be the most effective. It is necessary to consider in more detail the combinations for the most common intercom systems.

How to open an intercom from Metacom without using a key

Metacom system

For products from Metacom, the procedure is as follows:

• press the call key, then the apartment number, which starts the numbering of apartments;
• again the first key. “COD” will appear on the screen;
• You need to enter the numbers in sequence: 5, 7, 0, 2.

If it didn't work, then:

• 65535 and press the first button;
• Next 1234, the call key and the "8" key.

If the intercom does not open, then:

• enter 1234 and press the call button;
• 6, call button, 4568.

If you recognize the MK-20 M / T model, then you can enter one of the two following combinations:

1. Call, 27, call, 5702.
2. Call, 1, call, 4526.

With one method, you can definitely open the door.

Combination for Vizit devices

This company has many different models. For example, some have "*" instead of "C", and instead of "#" - "K". This fact must be taken into account.

How to enter the settings menu? For this:

1. Press #.
2. 1234, the beep will sound.
3. If a signal consisting of two tones has sounded, then one of the following combinations can be applied or alternately: "12345", "3535", "6767", "9999", "11639".
4. The operation is completed by entering "2, pause, #, pause, 3535".

Older models can be opened with short combinations: *#4230 or 12#345. Newer models require *#432 or 67#890.

Reception filmed by the guys on a phone camera:

Cyfral system

To enter using this system, you need to be patient and enter long combinations.

Cyfral

B0000. This combination is suitable for opening intercoms of the 2049.1M family. If entering such a sequence of buttons did not open the door, then ON should be displayed on the screen. Then press 2 and the door will open. If OFF is on the screen, then the program is protected from hacking.

0000CALL. This combination should open the doors of modification 2094M. COD should light up on the screen. Next, you need to enter 123456 and press the call button, or 4563 plus the call button, or 123400 and the call key. FO appears on the screen. You should press 601.

Open Eltis system without key

This system is characterized by less protection than other brands of intercoms. An emergency opening can be made by a set of the following digital combinations. One of them must log in.

• Call key - 100 - call - 7-2-7-3.
• Call key - 100 - call - 2-3-2-3.
• Call key - APARTMENT NUMBER - call - intercom code. The code is suitable for systems that serve apartments with multiples of a hundred numbers. The intercom code is either 2323 or 7272, 7273.
• call key - 4-1 - call key -1-4-1-0.

How to get into the entrance protected by the Forward intercom?

At this device there should be a special hole in the reader area. If it is not soldered and is still accessible, then you can open the lock simply by inserting it into the intercom thin wire or a paperclip. If opening with sharp objects is not available, you can, as with other models, try a number of digital combinations.

1. Call key - 5-5-7-7-9-8 - call.
2. 2-4-2-7-1-0-1.
3. 1-2-3-*-2-4-2-7-1-0-1.
4. Call button - 1-2-3-4.

If none of the combinations helped, then you can try adding your key to the microcontroller base. To do this, do the following:

• 7-7-3-9-5-2-0-1 — * — 0 — *;
• attach the key to the reader and press the # key twice.

Attention! If the code for writing the key did not fit, then you should try another one - 5755660.

Product Discovery by Marshal

Marshal

To open this device, you need to know the numbers of the last apartments in the entrance (hereinafter referred to as NPKVP) and use them in one of the combinations.

• NPKVP + 1 - call - 5-5-5-5;
• NPKVP + 1 - call - 1-9-5-8.

"NPKVP + 1" means that one must be added to the number.

Product from Stroy Master

Usually the installer forgets to change the factory codes. Therefore, you can successfully open the door by entering the following combinations in turn on the external panel.

1. 1-2-3-4, 6-7-6-7, 3-5-3-5, 9-9-9-9, 1-2-3-4-5, 0-0-0-0, 1-1-6-3-9. The action is completed by simultaneously pressing the call and cancel buttons.
2. Call button - 1234.

Door with intercom Laskomex

This manufacturer uses unique four-digit codes for each device. Therefore, if you recognize this code, you can use it in combination: call button - apartment number - a unique code from the manufacturer.

Another method does not require a unique code for your house intercom, but only the knowledge of simple combinations:

• alternately press the buttons with the image of the key and 0 four times, it looks like this: K-0-K-0-K-0-K-0 (where K is the key with the image of the key);
• then enter 6-6-6-6, wait for P to appear on the screen;
• press 8;
• The front door will open in a few seconds.

How to open an intercom without a chip from Techcom

The process of opening an intercom from Tekhkom is associated with the introduction of a common code and a part consisting of a unique code for a specific sample. If the installers did not set the code, then you can enter the following combination: 2-5-8 - 1-2-3-4 - call key - 3, "F3" will appear on the screen. This means that you have entered the add keys service. You need to enter the apartment number, attach the key to the reader. If there is already a cipher of this key in memory, then a double signal will sound, if not, then the cipher will be written, accompanied by one signal. To exit the menu, you need to press "X", if this is not done, the device will not remember the settings.

Old models of this company can be opened with the following combination:

• 1-6-0, moreover, when dialing numbers, they must be held;
• release in reverse order: 0-6-1;
• “- -“ should appear on the screen, press 4-3-2-1;
• will complete the process set B-3-B.

Opening the Factorial Device

Installers can complicate the whole process of opening this device without a key. Usually they change the factory settings. If this was not done, then it will be possible to open it with the following set of characters:

• 0-0-0-0-0-0 or 1-2-3-4-5-6;
• 5 - the screen will display the entry "180180" - call button - 4 - call button.

If the installers did not have time to change service settings, then this solution will help you get into the entrance at an emergency moment.

"Safe-Service" is opened by the following combination

As in the previous instance, you can enter combinations of six zeros or in order from one to six. If the settings have been changed, then the following steps should help you:

• press and hold button 5;
• ON will be displayed on the screen;
• enter 1-8-0-1-8-0 - B - 5;

However, this combination does not guarantee success. The same applies to all intercom systems. None of the above combinations of symbols and actions guarantees the opening of the intercom. Installers and service companies have long known a method to open a door without a key.

Installers protect apartment owners by changing settings

It is worth remembering that using these methods of entering other people's entrances is a crime. They can only be used in emergency situations to enter your entrance.