How to glue vinyl wallpaper on a paper basis. How to choose and glue vinyl wallpaper on a paper or non-woven basis. How to glue paper-based vinyl wallpaper: work steps and expert advice

Vinyl wallpaper on paper basis are currently very popular among a wide consumer circle, since they are inexpensive, represented by a variety of collections and manufacturers, allow you to embody almost any design idea and are sold in almost every hardware store. Not surprisingly, the question of how to glue them correctly is gaining more and more relevance. Let's consider it in detail in this article.

Vinyl wallpaper is a type of coating made from polyvinyl chloride (a type of plastic) applied to a natural base.

Most often, paper is used for this purpose, as it provides better breathability of the lining and more simple technology styling. You can also often find disputes between experts,. But this question can only be answered by practical application. Issued vinyl wallpapers in different colors and textures, among them there is an imitation natural stone, wood, brick, tiles, samples with a relief pattern. Their use will allow you to embody exactly any design, including loft, modern, classic and much more.

About Features this material it is worth talking in more detail in order to accurately determine all the pros and cons of such a choice.

Flaws

Many coating manufacturers position themselves as universal coating. However, this is not really the case. The use of paper-based vinyl wallpaper has, unfortunately, a number of disadvantages that consumers must reckon with. Among them:

Low strength- in the course of work, paper-based vinyl wallpapers are very easy to tear, especially if you use non-sharp tools or pull the material too hard.

Non-compliance with environmental regulations- not all paper-based vinyl wallpapers have pores, therefore for some rooms, including which they are not suitable for sanitary and hygienic standards.
Possibility of fungus on the wall due to the low moisture permeability of the samples(the problem is leveled by the correct primer of the walls).

Most of the shortcomings of vinyl wallpaper are easily leveled. proper preparation surfaces for installation, as well as following the recommendations for their installation, with the exception of low air permeability. If this indicator bothers you, choose samples with perforations - they do not have such disadvantages.

Advantages

Vinyl wallpapers have a lot of advantages over similar types of coatings, thanks to which consumers love them so much. The main advantages of acquiring this particular type of wallpaper include:

low cost;
versatility of application- wallpaper can be glued in working rooms, kitchens, as well as corridors and living rooms;
a wide range of models;
resistance to external influences;

greater plasticity: in comparison with the samples - such obi stretch much better, with their help you can block minor wall imperfections and better stretch the material on a relief surface;
coating durability- over time, vinyl wallpaper samples do not fade and retain a clear pattern.

Generally this species wallpaper has much more pluses than minuses, so installing them is always justified.

About how to properly conduct it, you need to talk in more detail.

Sticking technique

The process of sticking vinyl wallpaper as a whole differs little from standard procedure for all types of similar products. It is necessary in advance, and then proceed directly to the work itself. However, he has his own nuances. There are several secrets to successful gluing vinyl wallpaper that you should take into account when getting started:

It is not necessary with great zeal to achieve a perfectly even joint between the wallpaper. In such places there is high pressure sheets, which may cause the material to bulge. It's better to leave a small gap here.
It is worth gluing wallpaper on a window or door, but not on a plumb line. This helps to level the curvature of the walls, which is observed to one degree or another in every home.
To work with paper-based vinyl wallpaper, you need to select only the sharpest tools. The use of a dull knife can cause tissue rupture.
When gluing such wallpaper, drafts should not be allowed in the room. Airing, air conditioning - all this should be postponed until the canvases are completely dry. Otherwise, you risk ruining everything.

Given these nuances, you can proceed directly to the preparation of the process.

Wall preparation

Paper backed vinyl wallpaper can only be hung dry flat surface. Often the walls in our houses are not well suited to these characteristics, so builders or apartment owners (depending on who in your case deals with this issue) have to carry out complex preparatory work so that everything goes as it should. It is also worth considering that in most apartments there is already a layer of wallpaper that must first be removed. To do this, you need to know. Conventionally, they can be divided into several stages:

We remove the old coating. If the walls were previously painted, you need to remove a layer of plaster, as it will not work under the wallpaper.
Putty for leveling walls can be used only if there are large irregularities. After such treatment, the surface becomes spotty, it can either be pre-painted completely in White color(if you plan to install light wallpaper), or choose darker ones, under which spots will not be visible.
Primer is the next stage of wall preparation. In no case should the primer be skipped - otherwise mold may appear on the walls during further operation. To carry it out, you can use a special mixture or diluted glue - both of these approaches do not have significant differences.
If at the end of the work you find slight irregularities in the walls, do not be discouraged - the wallpaper will completely hide them, there is no need to adjust them to the ideal.

At the end of this stage of work, do not forget to take care of sockets and switches. It is worth removing the lining from them, and then sealing the holes with tape. This will provide protection from moisture and glue on the contacts. Before starting work, it is desirable to de-energize the system.

step by step process

When everything necessary to start work has been done, the wallpaper has been cut and fitted according to the pattern, and the walls have been processed, you can proceed directly to gluing. This process is carried out in several stages:

Preparing to start work. At this stage, you should collect the main equipment that will be needed at various further stages: pressure rollers, a basin of water, a tape measure, a ruler and a pencil, rags to remove excess glue, scissors and stationery knives, a brush for applying glue. At the same stage, it is worth preparing the room for work - closing the windows, doors and pores with cellophane film or newspapers - whichever is more convenient for you consumable you need to take it with a margin so as not to be distracted by its squeaks during the installation of wallpaper.
We apply glue to the wallpaper. The coating should be well saturated with it, therefore it must be left for 5-10 minutes before gluing, but not longer - the glue may dry out and the wallpaper will have to be processed again.
Installing wallpaper. We press the upper edge of the canvas against the wall, and then level it to the bottom, trying to avoid bumps and bubbles. We glue the next strip end-to-end, following the pattern.
We remove excess air. This should be done with a special roller, pressing the canvas against the wall with it. If you got samples with a delicate pattern, it is better to cut large bubbles on them with a knife, otherwise you risk ruining the coating. Traces of the cut on the dried wallpaper will not be visible.
Cut out sockets and switches around the room. Before work, it is advisable to de-energize them so as not to get into contact.

All wallpapering procedures are faster and easier to carry out together, when one person fixes the canvas on top, and the second level it along the entire length. This avoids the vast majority of coverage problems.

After the coating has completely dried, you need to make sure that the glue is taken well, the wallpaper does not give bubbles and does not swell at the joints. If no visible flaws in the cladding are found, we can assume that the work was completed successfully.

Full vinyl wallpaper gluing course: video

conclusions

As you can see, sticking vinyl wallpaper is extremely simple. In order to cope with it, you only need to pick up quality material and adhere strictly. Then everything will work out for sure.

The choice of vinyl wallpaper is huge. They can be chosen for the interior of any room or the room as a whole. In the article we will look at how to glue paper-based vinyl wallpaper and more! They come with small and large drawings, bright and rigorous. Their diversity allows you to realize any of your ideas.

The service life of vinyl wallpaper is more than ten years, therefore, having repaired it once, you can long years admire the beauty of the wallpaper.

They do not darken and do not turn yellow over time, they are cleaned by special means. So if you have little tomboys (children) in your family who love to dirty everything around, including wallpaper, do not worry that in a year you will have to re-paste the wallpaper. Just clean them and they will be like new again.

How to glue paper based vinyl wallpaper

Those who independently make repairs indoors often ask themselves the question: “How to glue vinyl wallpaper on a paper basis?”. This is what we will talk about today. So, let's begin.

Wall surface preparation

Before gluing any wallpaper, you must first prepare the surface of the walls. They should be clean, dry and preferably perfectly even. To do this, the old coating is removed from the surface, the walls are leveled with building plaster or putty. If the flaws are strong, then the surface can be leveled with drywall. The surface is then treated liquid primer(needed for better adhesion of the adhesive to the wall) and dries.

A bit of theory

It is worth noting that vinyl wallpaper with a non-woven base is not glued when gluing, only on the wall. The paper base, in turn, requires the application of glue to the wallpaper, while the edges of the canvas should be very well coated so that they are not dry. See the instructions that came with the wallpaper.

As a rule, the manufacturer describes whether wallpapering requires applying glue to the wall and canvas, or just to the surface. As well as methods for cleaning wallpaper. Vinyl wallpapers can be cleaned with special cleaners.

Wallpaper is glued using the "butt-to-butt" method. And since the paper from which the base of the wallpaper is made tends to “shrink” when dried, a special roller with short bristles is used to press the canvases against the wall, and not spatulas. And so that later gaps do not form between the seams, the wallpaper should not be strongly smoothed and stretched when gluing.

Glue and wallpaper pattern

In the room where the wallpaper will be pasted, there should be no drafts, because they do not tolerate changes in temperature and humidity. And the air conditioning system is off. Otherwise, all the canvases will simply peel off, and all your work will be in vain.

So, we dilute the glue strictly according to the attached instructions. Glue must be specifically for vinyl wallpaper. While the glue swells (as a rule, it takes from 10 to 15 minutes), we prepare the canvases. The canvases are cut to the desired length, leaving an allowance of about ten centimeters, and stacked on top of each other (stack) with a pattern down.

Follow the drawing! The picture must match exactly. Therefore, before cutting off the next canvas, measure the pattern on it with the already cut canvas.

Wallpapering process

After all the canvases are cut, we begin wallpapering. Due to the density of vinyl, the adhesive is applied to the wallpaper in a thick layer. It is not worth gluing wallpaper on the wall immediately after applying glue to the canvas. They simply won't stick.

They need to be rolled base to base and left to swell. The swelling time of paper-based vinyl wallpaper can be found on the manufacturer's packaging.

The denser the canvas, the more time it will take. When swelling, the fibrous fibers of the wallpaper swell, and the canvases themselves stretch slightly. Therefore, in order to avoid "surprises" during wallpapering, the swelling time of each canvas should be the same.

Wallpaper canvases must necessarily go a little on the ceiling and baseboard. If possible, remove the plinth before work.

First sticks upper part canvases from above, using a stepladder, the second aligns the wallpaper from below as much as possible. The bottom edge of the canvas should be bent onto the plinth.

In order for the canvases to lie flat, lines can be drawn on the walls before wallpapering. Then, using a roller with small bristles, all the air formed between the wall and the canvas is expelled, making smooth movements, starting from the center and approaching the edges, as well as from top to bottom so that the wallpaper does not move away when it dries.

As a rule, wallpapering starts from any corner of the room. Cloths, overlapping this area, should overlap each other by at least three, or even four centimeters. Another canvas is glued on another wall from the very corner.

If glue sticks out at the edges when sticking the canvases, be sure to remove it with a dry roller or rag so as not to stain front side vinyl wallpaper. Press the joints carefully. If suddenly they start to move away, take a small brush and gently coat these areas with glue, then press it against the wall again.

Trimming the Remaining Material

After the wallpaper has dried, using a sharp special construction knife, the remaining material is cut off under the ceiling and on the plinth strictly along the line. Make sure that the tool is sharp, otherwise you run the risk of making an uneven line of wallpaper (which will not look very nice) or even tearing the wallpaper. Then you have to do all the work again.

Treatment of the area where sockets and switches are located

If there are sockets and switches in the room, turn off the electricity and unscrew them. Holes for them are not cut out until the wallpaper is completely dry. After the panels have completely dried, holes are carefully cut out with a construction knife and the plastic components of sockets and switches are screwed back.

Useful advice

If you do not have experience in wallpapering, then it is best to use the services of craftsmen who will make your room look “candy”. True, you have to pay for such services, but what can you do for the sake of the beauty of your home. You can also consult with them about how it is produced. They will tell you all the nuances, and you can create unique design premises!

Among the huge variety of types of wallpaper produced by the industry, all of them, regardless of the complexity of the production technology or the number of layers, have either a paper or non-woven base. Depending on this, an adhesive is selected that corresponds to one or another basis. The selection of glue for vinyl wallpaper on paper bases requires special attention. Why you should pay special attention to the selection of glue, specifically for this type of wallpaper, we will answer in this article.

Wallpaper has been and remains the most popular means of decorating walls in residential areas. This is especially true of living rooms, bedrooms, children's rooms. Wallpaper is less widely used in hallways, kitchens, and toilets. Almost never used in bathrooms.

Vinyl wallpapers

Vinyl wallpaper became widespread in the late 80s - 90s of the last century. The novelty of the product in the post-Soviet market, brightness and color fastness, attractive appearance and ... perhaps the main thing at that time for the average consumer was their phenomenal wear resistance and the ability to wash off pollution with a damp cloth.

In order to save money, vinyl wallpaper, with the prospect of their possible “renewal” by washing, began to paste over everything indiscriminately in apartments - from children's rooms and bedrooms to bathroom walls. The practice of using vinyl wallpaper very quickly showed the fallacy and inadmissibility of such a thoughtless use of "vinyl".

It became difficult to breathe in the apartments; for a long time, a specific smell from the wallpaper remained in the rooms. On some surfaces, the wallpaper began to flake off and fall off in whole strips, while on others, gaps began to appear between the joints of the wallpaper, which greatly spoiled the appearance of the room, especially if the wallpaper was of dark tones.

The reason was ignorance of the features of the use of vinyl wallpaper. There was practically no information from foreign manufacturers about the product and the composition of wallpaper adhesives that should be used for sticking this type of wallpaper.

Texture of vinyl wallpaper

Vinyl wallpaper is nothing more than a thin, mass-dyed, polyvinyl chloride film applied to a paper or non-woven base. There is a kind of vinyl wallpaper - “foamed” - this is really a foamed polyvinyl chloride mass, usually highly embossed, also having a paper or non-woven base.

Based on these features of the structure of vinyl wallpaper, one can distinguish a number of their properties:

The ability to stick depends on the properties of the substrate: paper or non-woven layer.
Vinyl wallpapers have more weight compared to other types of wallpaper due to the severity of the polymer coating.
Vinyl wallpaper absolutely does not let air and moisture through.
Requires special preparation of the surface for gluing.
Requires special wallpaper adhesives.

Surface preparation

Features of surface preparation for sticking vinyl wallpaper are due to the fact that the top - vinyl layer, absolutely does not allow air and moisture to pass through. Therefore, the drying time of the glue applied to the paper base increases several times compared to paper, non-woven or fabric wallpaper.

Painted walls are absolutely not suitable for sticking vinyl wallpaper. oil paint, which also does not allow moisture to pass through.

The wall for vinyl wallpaper must have a flat surface, be completely puttied and processed sandpaper wrapped on a sanding block to remove small sagging and bubbles on the putty. After grinding, the wall is treated with a primer to give the surface density and eliminate traces of construction dust.

Only in this case, when the wall comes into contact with paper-based vinyl wallpaper, there will be sufficient air exchange, which will allow the adhesive to dry quickly and evenly.

Glue composition

Currently in construction stores you can find a fairly rich assortment of wallpaper glue from various manufacturers and for various types wallpaper. Therefore, the question of which glue to use is not worth it.

The question is which one - should not be used!

You can try to use archaic means for sticking vinyl wallpapers - such as paste, PVA glue or Bustilat, if you are pasting over a barn or a chicken coop and do not plan to make any repairs in them in the next 25-30 years.

A paste made at home from potato starch or flour is a very unstable adhesive composition, which, moreover, is loved by various types of mold fungi and cockroaches.

PVA glue or Bustilat - this is for those who do not think about the subsequent possible repair Or change boring wallpapers. Both adhesives create a strong airtight film that is almost impossible to remove from the wall surface without completely removing upper layer plasters. Think about the time and effort it will take to remove the old wallpaper from the wall in the event of a subsequent repair before applying these "non-wallpaper" vinyl wallpaper adhesives.

The most acceptable are the compositions of world famous brands: "Cleo", "Metylan", "Quelyd", or domestic production"Moment".

When choosing among manufacturers, it is better to focus not only on the price of a package of glue, but also on the number of rolls of paper-based wallpaper that can be pasted using 1 package (indicated on the glue package), drying time and, most importantly, what types of wallpaper this glue is intended for.

All of the manufacturers listed above have a range of wallpaper adhesives for different types of wallpapers. Ideal - would be the use of glue for "vinyl wallpaper". In the absence of glue for vinyl wallpaper, it can be replaced with glue for "heavy wallpaper".

All modern wallpaper paste compositions are based on modified starch, with large quantity various additives that not only increase the adhesive properties of starch, but prevent the formation of mold, eating wallpaper by termites and other insects. The possibility of easy application to the surface with a roller, adjustment of the wallpaper on the wall due to its high sliding properties, as well as fast withdrawal wallpaper canvases during repairs without the use of steaming or spatulas.

It is for these indicators that the French wallpaper glue "Quelid" is out of competition. True, and the price category is one of the highest.

Any more "heavy" category can be successfully used as wallpaper paste or lighter types. It is better to dilute it more strongly than the standard recipes indicated on the package.

Features of applying glue to vinyl wallpaper

When sticking paper-based vinyl wallpaper, prepared in accordance with the instructions on the package, apply the adhesive both on the wall surface - first of all, and on the paper-based wallpaper. After applying the glue, the wallpaper strip must be folded in such a way that the surfaces smeared with glue come into contact with each other. Then roll up into a loose roll and leave for 15-20 minutes to evenly impregnate the paper base.

Only after such an “exposure” will the strip of wallpaper lie evenly on the wall, no air bubbles will form and a large amount of glue will not be released from under the edges of the wallpaper when smoothed with a wallpaper spatula.

Tip: Never smooth the wallpaper with a cloth or your hands. This does not guarantee complete removal of air and excess glue from under the canvas. Used when wallpapering a wide soft plastic "wallpaper" spatula.

Wallpaper sticker is perhaps one of the few construction and finishing works that every adult has not done at least once in his life.

Summing up

The right choice of wallpaper paste for paper-based vinyl wallpaper is not only choosing a manufacturer that is affordable for you, but that you take a few minutes to read the information on the adhesive package and make sure that it is intended for sticking vinyl wallpaper. And in the future - it will be better to strictly adhere to the manufacturer's recommendations for the preparation of glue, without trying to improve or speed up the dissolution process - brewing with boiling water (instead of cold water) or "increase" stickiness - diluting 2-3 times thicker than recommended by the manufacturer.

What is the easiest way to decorate a room? Modern technologies varied, have their advantages and disadvantages, but still high level popularity is characterized by a simple and affordable way for many - pasting the walls with wallpaper. Therefore, it makes sense to figure out how best to perform the procedure, in particular, paper-based vinyl wallpaper.

For clarity and clarity, we will use photos and videos. We will figure out which glue to choose, how to glue correctly.

You will learn about:

Advantages

Probably the most important plus of such wallpapers - affordable price. However, there are others important characteristics, which force many to make a choice in favor of just such an option, for example, a large assortment. There are many embossed and color designs available on the market.

In addition, such material is characterized by environmental friendliness and safety. However, at the same time, the wallpaper is treated with a special composition that does not allow mold to develop during the operation of the material.

Important factors are reliability and durability. The material perfectly resists the negative effects of temperature, moisture and sunlight. Paper-based vinyl wallpapers are perfectly washable, as they have a dense top layer.

Material calculation

An important aspect of any repair, including gluing paper-based vinyl wallpaper, is the calculation necessary materials. In our case, we are interested in two aspects:

the wallpaper itself;
adhesive composition for fixing them on the walls.

Wallpaper can be calculated quite simply and with high accuracy. You can do so. Measure ceiling height. This will be the length of one canvas. Then measure the perimeter of the room, and divide the resulting figure by the width of one roll of the selected wallpaper - this will be the number of paintings. It remains to multiply this number by the length of one canvas - we get the total length of all pieces.

To determine required amount rolls, you need to divide the total length by the length of the web in one roll. We will get the required number of rolls. It is necessary to add a certain amount to it in order to purchase material with a margin. This is a necessary measure in case of marriage and other nuances.

We must also remember that in every normal room there is at least one door and one window, which, of course, we will not paste over with wallpaper. Therefore, these pieces can be subtracted from the total length.

As for the glue, its quantity is calculated taking into account the available area and the consumption of the composition. The last parameter is indicated on the package. It should be remembered that the manufacturer takes into account average conditions that are closer to ideal. Therefore, the data must be pessimized, that is, if it is indicated that the pack is enough for 10 squares, it is better to count on 7, or even less.

In many ways, the consumption depends on the condition of the base and the type of wallpaper used. All these nuances must be taken into account in the table indicated on the package.

Remember that we use glue for paper-based vinyl wallpaper.

Tool preparation

In order to glue paper-based vinyl wallpaper with high quality, it is worth preparing the following tools:

brush and roller for applying the adhesive composition;
roller for smoothing wallpaper;
tape measure, pencil and level;
masking tape;
sharp knife;
rags.

Wall preparation

The walls must first of all be cleaned of dirt, dust, and bumps removed. The better the preparation, the more beautiful the result will be. Also, after all the manipulations, the walls must be thoroughly dried so that this does not affect the quality. To check the dryness, you need to leave on the wall plastic bag: if condensation forms on it overnight, the wall must be dried. You can also use masking tape. If, after gluing it, plaster, paint and other contaminants remain on the adhesive side, the surface of the walls must be prepared more carefully.

Next, the coating must be primed. For this you can use either special composition, or diluted paper-based wallpaper glue. If work is carried out in wet room, treatment with an antifungal mixture is also recommended.

It is necessary to mark the beginning of work. We take a plumb or level and draw a vertical line along which we will navigate when gluing the first canvas. By the way, it is better to glue it near the window so that the joints are not so noticeable. True, this technique is effective if the gluing is overlapped.

Before sticking, do not forget to turn off the electricity and remove the sockets and switches. All windows, as well as doors, must be closed to avoid drafts - the enemies of new wallpaper.

Preparation of glue and wallpaper

The canvases need to be cut with an allowance of 5-10 cm. The extra pieces will be cut off after gluing, when the material dries. If there is a drawing that needs to be aligned, remember about it when cutting.

Glue is prepared traditionally. We collect water in a container, add powder gradually, stir constantly. Leave for a few minutes before using again stirring.

Glue wallpaper on a paper basis and paper wallpaper on a non-woven basis - these are different approaches. In our case, we are gluing paper based vinyl wallpaper on video. The work is done end to end. Glue is applied to the wall, focusing on the area of \u200b\u200bone canvas. Glue can also be applied to the wallpaper, which will contribute to better adhesion of materials.

The operation is best done together. One person applies glue to the canvas on the floor or table, while the other person applies glue to the wall. The first transfers the canvas (it is better to fold the lower part with the glued side inward), and the second glues the material. It must be ensured that air does not accumulate under the canvas.

Similarly, we perform operations for all canvases until we seal the entire room. Places with sockets are cut in a cross, do not go beyond the area of \u200b\u200bthe device, and then carefully cut off so that the socket or switch does not cover the wallpaper material.

Results

As you can see, there is nothing complicated in sticking paper-based wallpaper, if you follow the instructions given, act consistently and consciously. Then you will definitely get an attractive result.

With the development of interior design technologies, many various kinds wallpaper. Today, vinyl material, which has a paper base, has become very popular. Such canvases have high density, do not lose their attractive appearance for a long time. give the walls beautiful view you can, knowing how to properly paste them.

How to glue vinyl wallpaper on a paper basis

It is not recommended to glue paper-based vinyl without surface preparation and the material itself. To meter wallpaper lay down beautifully and evenly, held on for a long time, you need to take a few preparatory steps:

First, clean the walls of previous coatings: old paper and plaster.
The surface on which you want to stick the wallpaper, consisting of vinyl and paper, must be flat. Be sure to level it with special materials.
Fill cracks and patch uneven areas using putty mixture.
Eliminate the risk of mold by treating the walls with a primer against fungi.
Please note that there are no drafts in the room, there are no air conditioners turned on. Such measures are required, since paper-based wallpapering requires absolute dryness of the surfaces.
Before you start how to glue paper-based vinyl wallpaper, cut them into canvases. required size, leaving 10 cm in stock. Lay face down, start applying glue. The surface will be well saturated if you fold the cut in half for a while with the adhesive mixture inside. If the pattern on the material is repeated, number each cut so as not to spoil the pattern.

Sticking vinyl wallpaper on a paper basis

After completing the preparation of the material and leveling, priming the surfaces, proceed to gluing. To do this correctly and evenly, instructions on how to glue paper-based vinyl wallpaper will help you:

You need to start gluing from the corner of the room. It is important to draw a straight line on the wall along which the first strip should be glued. You can mark it with special tools: level and plumb.
Glue the wallpaper strip on top and start aligning down vertically. Smooth the surface of the canvas with a roller in the same direction to remove air bubbles and unnecessary glue.
Making movements with the tool from the center to the edges of the cut, secure the edges.
Wipe off excess adhesive with a clean cloth. If the border of the cloth does not stick well, brush a little with a thin brush, dipping it in glue.
Wallpaper created from vinyl, by analogy with other heavy types, must be glued end-to-end.

What glue to glue paper-based vinyl wallpaper

When sticking these canvases, it is recommended to use only a special mixture. The packaging of such a composition indicates that the product is intended for vinyl or heavy materials. It is necessary to prepare the adhesive mass, strictly following the instructions indicated on the pack. It is important to maintain the correct ratio of powder and liquid so that the adhesive does not turn out to be too thick or liquid. Mix the required amount of the contents of the package with water and let it swell a little.

A good wallpaper adhesive for vinyl can be selected according to the following criteria:

it is easy to dilute with water;
no lumps appear during cooking;
has a subtle, unsharp smell;
adhesive mass provides slip, which will make it easier to align the cuts when pasting;
the composition includes a component that prevents the appearance of fungi under the paper;
does not provoke the formation of spots;
may remain usable for up to 2 weeks.

On the modern markets glue for vinyl sheets is represented by several famous brands:

"Moment";
"Express Vinyl";
"KMC-N";
Metylan;
Kleo;
Fintex.

How to glue wallpaper in the corners

It is not very difficult to attach cuts to the protruding corners in the room. To do this, you just need to wrap the edge of the canvas over the ledge. But this technology is suitable only if the angle has smooth edges. Otherwise, you need to fix a strip of paper on one side of the wall with an allowance of 3 cm. The stock must be wrapped and attached to the opposite part of the corner. Cut the fixed allowance with a clerical knife so that a small edge remains. The next canvas is glued with an overlap, which should not be more than 5 mm.

How to stick vinyl on inner corner:

Attach the first wallpaper to the wall with an allowance of 5 cm, which should be located on the opposite surface.
Lubricate the protruding piece with PVA glue. Glue the second strip so that it does not touch the wall nearby.
Smooth out the place of gluing with a special wide plastic brush or roller. If the adhesive comes out, wipe it off with a clean cloth.
When the adhesive dries, use a paper cutter to cut through two layers of paper at once from the bottom up.

How to glue vinyl wallpaper back to back

Technology, how to glue paper-based vinyl wallpaper end-to-end:

Having well glued a piece of paper with glue, attach it strictly along the line marked with the level.
The sticker must be carried out so that there is a supply of paper of about 5 cm, located above and below.
Sticking vinyl is complicated by the fact that the material has the ability to shrink during drying and high extensibility when glued. Therefore, when you press and smooth them, avoid stretching in width so that cracks do not form during drying.
Glue the next cut exactly to the previous one so that the edges touch. Carefully roll the seams with a small roller.
If, after drying, you find small gaps, try to eliminate them by slightly bending the edge of the canvas, smearing it with glue. Pull the wet vinyl up to the seam line.

Video: paper-based vinyl wallpaper sticker

Categories

Popular