Annoyed by nasty crumbs under the keys that can't be pulled out with anything? Tape will help you. Fold up sticky tape sticky side out and swipe across the thin slits between the keys and the keyboard case. Debris will stick, the keyboard will become clean.

2. Clean your clothes

Sticky rollers for cleaning clothes run out at the very wrong moment. But there is a wide adhesive tape, which is no worse.

3. Collect broken glass

If you accidentally (or on purpose) break a plate or glass, small crumbs will remain on the floor or on the table. Gather them with tape, then they will not harm your heels.

4. Draw arrows

How many tricks have been invented so that, starting from the use of a spoon and ending with special stencils. Be simple. Stick the tape on the eyelid and calmly fill the space from the edge of the eyelid to the tape with eyeliner. Then remove the tape. You will get arrows with perfectly smooth edges.

5. Make a pattern on your nails

Scotch stencil can be used not only on the eyelids, but also on the nails to create patterns of varying complexity.

6. Collect mercury

When, mercury scatters across the floor with a hundred tiny droplet balls. And all of them must be carefully collected for disposal so as not to breathe toxic fumes. Scotch works well for this.

7. Wrap your laces

If your shoelaces are frayed at the ends or the laces have fallen off, wrap them with tape. This will make the laces look neater, and it will also be easier to lace them.

8. Cover up calluses

A temporary measure that will save the legs in new shoes if there is no patch at hand, but there is adhesive tape. Just protect the areas that the shoes rub with it.

9. Remove traces of glue

You removed the sticker from the item, but the glue remained. Take the adhesive tape, press it with a sticky surface to the glue and tear it off sharply. The glue will stick to the tape.

10. Protect your plastic card

If you have a card with a magnetic tape, and you use it often, then there is a risk of damaging this very tape. Seal it carefully with tape so that there are no bubbles or wrinkles. The tape will be protected, and the devices will read it.

11. Make an elf ear

Halloween isn't coming soon, but you'll just have time to train to make it real costume elf. Take thin, transparent tape, secure the end to the back of your ear, and carefully wrap the tape around to sharpen the tip of the ear. Then you can mask the adhesive tape with foundation and powder so that no one doubts who the real Galadriel is here.

12. Make a hiding place

Tape valuables to inner surface beds or tables. But in a place where it will not be noticeable and where the cache is difficult to get.

13. Use tape instead of a bandage

In case of injuries, the adhesive tape will serve as a temporary replacement for the bandage, especially if you need to put a splint and wrap your arm or leg to the stick.

14. Tidy up your wires

Fold in one bundle the wires that stretch from your table to, and wrap them with tape. Now, instead of a dozen tangled cords, you will have one.

15. Protect your bag or pocket

If you need to put something with sharp corners (for example, a screwdriver) in your bag or pocket, but there was no case or bag at hand, wrap the dangerous object loosely with tape. So the lining of the bag or jacket will not tear.

16. Remove stuck ring

When you can’t get the ring off your swollen finger, and soap doesn’t help, try scotch tape. Take a thin and long (about 30 cm) strip of tape, fold it in half lengthwise, with the sticky side inward, so that you get a long and smooth strip. Pass one end of this strip under the ring so that it protrudes 2–3 cm. Wrap the long part of the tape tightly around your finger, grabbing the joint. Then gently pull on the short end of the tape behind the ring. The ring will gradually move along the adhesive tape, and the finger will be freed from the wrapped tape. Usually, instead of scotch tape, a thread, but a smooth tape made of scotch tape is no worse.

How to stick regular tape on the display of any device with a display width of up to 50 mm

Description:

Materials:
1 Vodka 100-150 gr.




The actual procedure:







9 Drinking leftover vodka?


Next, we act according to clause 3
Recommendations:

9 good

We protect the phone display with ordinary adhesive tape

Description:
This technology allows you to protect the display of your mobile phone from mechanical influences(scratches, scuffs)
Materials:
1 Vodka 100-150 gr.
2 Transparent household tape 50mm wide
3 Dry cloth for wiping monitors or similar
4 Stationery knife or blade (whatever you like)
5 From 5 to 30 minutes of time (this is how it goes)
6 Well lit work desk
The actual procedure:
1 We clean the screen from dirt, grease, stains with a cloth slightly moistened with vodka (you can probably use another cleaning agent, but it is POSSIBLE AND MORE THAN PROBABLY clouding of the protective glass)
2 We make a tail (ear) on a roll of adhesive tape for which we will unwind it
3 With a very damp cloth, apply to the glass of the screen thin layer vodka (no drops, and carefully)
4 We unwind tape about 20-30 cm long from the roll (it is necessary to pull the tail of the tape evenly, at the same speed, or with one jerk, because with an interrupted break from the roller, white stripes of torn glue form on the tape itself. We pull the tape constantly tangentially to roller circumference)
5 Pulling the adhesive tape between the fingers and the roller, carefully place it on the display glass, smooth out small air bubbles to the side edges
6 We glue the adhesive tape on the end surface above the display and the keyboard block below it (they should not be moistened with vodka).
7 We wait 1 hour or more until the vodka evaporates from under the adhesive tape on the glass
8 Beautifully and neatly cut the tape along the contour
9 Drinking leftover vodka?
If you already have tape on the display then:
10 Gently picking it up by the corner with the stationery. knife, remove it from the glass and discover the terrible sight of an almost opaque display smeared with poorly erasable glue.
11 We tear off a square piece from a roll of adhesive tape, stick it on the glass and tear it off; after 10-30 gluing and tearing, the glue on the glass rolls up into balls and remains on the adhesive tape. This procedure does not require any skill or care when gluing and tearing off and usually lasts no more than 2-3 minutes.
Next, we act according to clause 3
Recommendations:
Adhesive tape should be selected as transparent as possible, without adhesive irregularities and turbidity. The winding of higher quality tape is visible on the roll to a greater depth of layers.
At the end of step 6, whitish traces of unevaporated vodka form under the adhesive tape on the glass, which disappear after about 3-4 hours
If small and insignificant bubbles still remain on the glass, then there is a chance that after 6-9 hours they will disappear.
If an air bubble appears on the stele under the adhesive tape with black dot in the middle it is better to re-glue the adhesive tape.
On a clerical knife, before cutting off excess adhesive tape, it is better to change the blade.
Vodka not only cleans the surface and rewards you for your efforts and patience, but also briefly lubricates the glass surface and blocks the properties of the adhesive for a more convenient sticker and adhesive tape alignment. I have not tried using water instead of vodka.
If you have any questions, wishes and additions, I suggest you contact me in a personal.
The next time I change the tape on the display, I'll try to take photos.

Attached file #1.

Kirill Sysoev

Calloused hands do not know boredom!

Content

Adhesive tape is used in huge number spheres: construction, repair, creativity, industry, everyday life. Scotch tape with two adhesive sides is very popular. With it, you can solve a lot of important tasks with a minimum of effort. There is different types such adhesive tape, each of which has its own characteristic properties and advantages. Learn all the features of working with this material.

What is double sided tape

This is a special tape, both sides of which are sticky. Designed for secure fastening of any two items. Whatever the substrate of the adhesive tape, it always uses a rubber or acrylic-based adhesive. On one side there is protective film made of waxed paper, which is torn off with a slight movement, revealing a sticky surface. There are many areas of use for this material. It is reliable and economical.

Application

In most cases, double tape is used in repair and installation work. With it, not too heavy objects are attached to suspended ceilings, tiles, linoleum. List of applications:

• fixing linoleum to the floor;
• mounting finishing panels from lightweight materials;
• design work;
• seamless fastening of the package;
• gluing metal furniture;
• installation of road signs;
• fastening of stiffening ribs of metal doors;
• fixing handles on transparent sliding doors;
• connection of small shelves;
• gluing mortgages;
• installation of false ceilings;
• fastening holders, hooks;
• assembly of window structures;
• gluing moldings;
• clothing industry;
• installation of boxes for wiring;
• printing industry;
• manufacturing volumetric letters, advertising light structures;
• needlework;
• typographical business;
• creation;
• car body repair;
• economic work.

Main advantages

Double-sided adhesive tape has many advantages, so it is actively used in many areas. Benefits include:

• the convenience of use;
• reliability;
• strength;
• economical consumption;
• low cost;
• impact resistance ultraviolet rays, moisture, temperature, solvents;
• durability;
• tightness.

Kinds

There is different types adhesive tape. Choose the right one according to the task at hand. Types of double-sided tape on sale:

1. Foam based. It has a thickness of 0.5 mm or more. It is actively used in the field of construction and repair. Great for attaching items complex shape, not flat surfaces, products with holes. Roughness and other defects reduce the area of ​​the bonded surface. Therefore, for their fastening, a double-sided Velcro with a reliable base, for example, foam, is required.
2. Polypropylene. Film-based, resistant to moisture and mechanical damage. Transparent, thin and elastic, easy to use, high quality, provides a rigid grip on hard surfaces. Good for working with glass and polymers.
3. Paper-silk. With an easily torn base. With a weak adhesive, suitable for gluing paper, photographs.
4. Special. For complex jobs such as high temperatures. Suitable for attaching large items. This variety will be expensive.
5. Baseless. Adhesive transfer material. Completely transparent. It is transferred with sticks together surfaces under the influence of high temperature. impact resistant sun rays, solvents, chemicals. It is used for lamination, fastening of foam materials and plastic.
6. Fabric based. This double-sided adhesive tape is very strong and durable. The basis is cotton or synthetic. It is recommended to use it for work with floor materials, decoration. The material is soft and flexible. Suitable for fixing uneven rough surfaces.
7. For vertical mounting. Used for gluing mirrors, hinged moldings.
8. For horizontal mounting. It is used for laying linoleum, other floor materials.

How to apply double sided tape

First you need to select a ribbon suitable type based on what you need to fix. Features of the workflow with adhesive tape:

1. If the materials to be fastened are of different quality, then you need to carefully remove the film from one sticky surface and stick it to the object that is more porous. Then the second protective layer is removed. A second object is applied on top, which needs to be glued, pressed tightly and held for a while.
2. On the simple products tape can be attached in any order.
3. The area of ​​adhesion of materials should be maximum.
4. Cut the pieces ahead of time.
5. Before gluing the surface must be cleaned of dust, degreased.
6. Do not touch the sticky layer with your hands.
7. Press the attached surfaces to each other long and hard.
8. If items different sizes, then first the adhesive tape must be applied to the one that is larger.
9. Favorable temperature for gluing is from 20 to 40 degrees.

How to peel off double sided tape

This task is sometimes very difficult and confuses many. It is very problematic to remove the double-sided adhesive tape so that there is no trace of it left. The removal method depends on the material of the surface to be cleaned. For the procedure, the following compositions and tools can be used:

• petrol;
• rubber nozzle on the drill;
• alcohol;
• vegetable oil;
• acetone;
• kerosene;
• White Spirit;
• solvent.

First, the double-sided adhesive tape must be carefully pry off and tear off a part, and only then apply additional funds. Removal Tips:

1. To peel off tape from paper (for example, wallpaper), direct a stream of hot air at it with a hair dryer. After a few minutes, pry with something sharp and carefully remove. If necessary, you can warm up several times, removing a small piece.
2. You can try to remove the tape masking tape. You need to take a big cut. Press it firmly against the tape, leaving one edge free. Slowly pull the tape towards you. The adhesive strip will stretch after it.
3. The adhesive tape is removed from the fabric with alcohol. The remaining particles are gently erased with a sponge.
4. Use oil for plastic surfaces. Pour a little on the sticky area, wait a bit. Rub with a soft sponge.
5. Oil is not suitable for removing tape from fabric, paper and cardboard. There will be traces that cannot be removed.
6. If the surface is not painted, use acetone or nail polish remover to clean. These agents will dissolve the sticky layer and double sided tape easily removed. Acetone evaporates quickly and leaves no residue, so it is suitable even for some types of paper.
7. Painted surfaces are best cleaned rubber nozzle on the drill.
8. It is advisable to remove the sticky double-sided tape from varnished products vegetable oil. The exposure time can be up to 12 hours.
9. If the surface cannot be wetted, try removing the double-sided tape with a simple eraser.

Often, various objects are glued with adhesive tape to walls and doors. From such surfaces, double-sided adhesive tape is easiest to remove in this way:

1. Turn on the hair dryer near the object to be removed.
2. Holding it at a distance of a few centimeters, direct a stream of hot air onto the double-sided tape. Pay particular attention to the edges and corners.
3. Warm up the tape for several minutes in a row.
4. Turn off the hair dryer.
5. Pry the edge of the self-adhesive with a fingernail or knife and remove it by gently pulling it towards you.
6. Wipe off the remaining sticky material with a damp sponge dipped in soapy water.

Remember a few more useful tips regarding tape removal. These recommendations will help you understand how to act in unusual situations:

1. 90% alcohol is very effective, but 70% is better for painted surfaces.
2. Do not rub tinted glass with acetone or nail polish remover.
3. Clean smooth surfaces with cotton pads soaked in alcohol, and uneven and rough surfaces with a cloth or towel.
4. To remove the sticky layer from household appliances, ceramics, glass and tiles use acetone, window cleaner or vinegar. Alcohol will also work.

From plastic

Surfaces of such material are best removed with medical alcohol. It does not act as aggressively as acetone or caustic solvents, so it will not damage either the plastic itself or the paint. Pour a little alcohol on the double-sided adhesive tape and leave for a while to absorb. Gently tear off the material. If excess adhesive remains on the surface, wipe it off with a soft cloth liberally dampened with rubbing alcohol. With caution, you can use gasoline and white spirit.

From glass

In this situation, methods with exposure to hot air cannot be used. This may cause the glass to crack. It is also forbidden to use abrasive materials that are guaranteed to leave scratches. To remove the double-sided adhesive tape glass or mirror, you will need the following accessories:

• medical alcohol;
• window cleaner (you can make your own by mixing 275 ml of water, 60 ml of vinegar and a little liquid soap);
• edible or mineral oil;
• glass polish;
• butter knife or wooden spatula;
• sponge.

It is important to proceed carefully and slowly so as not to damage the surface. Step-by-step instruction:

1. Pry off the corner of the tape with a butter knife or wooden spatula. Try to tear off the largest possible piece.
2. Spray the surface to be treated with a window cleaner.
3. With a sponge, wipe the area in a circular motion.
4. Soak the remaining double-sided tape with oil. Scrub with a sponge until everything is removed.
5. Moisten a piece with alcohol soft tissue. Wipe the surface.
6. Polish clean glass.

From furniture

Many items are secured with double-sided tape during shipping. Doors, drawers and other elements of cabinet furniture are especially often glued. Scotch can get on soft part. In such a situation, use the removal methods used for the fabric. Recommendations for cleaning other furniture surfaces:

1. Clean painted and polished elements with oil.
2. Clean untreated wood without varnish and paint is best cleaned with gasoline or white spirit. Oil will not work, because it will saturate the material and leave greasy marks.
3. If you do not know exactly what the surface is made of, it is better to use medical alcohol. It is the safest and suitable for almost everything.

Choice

Of the many types, it is important to choose the adhesive tape that will best meet your requirements. Then the work performed with its use will be durable and reliable. To decide on the choice of adhesive tape for purchase, use the following recommendations:

1. Double-sided tape with acrylic adhesive gives excellent adhesion immediately. It is recommended to use it for fixing mirrors, hooks, hangers, information plates in public places.
2. For smooth flat surfaces suitable double-sided tape with a film base.
3. When choosing adhesive tape, specify which Weight Limit And he can handle the load.
4. For angular, rough, uneven surfaces more suitable tape on a rubber base.

What can be done with double sided tape

Creative people can use the tape as a handy tool for their crafts, toys. From adhesive tape it will be possible to make:

• picture;
• sculpture;
• interior decorations;
• artificial flowers;
• desktop organizer;
• gift wrapping;
• candlestick;
• covers for notebooks or textbooks;
• envelopes;
• note board;
• bookmarks;
• small boxes for storage.

Hide things, show trick, get a splinter, protect bank card and 16 more ways to make life easier with a simple sticky tape.

Yaroslav Sviridov

01

Protect plastic card

If you carry a bank card in the same pocket as a file, you can damage the magnetic strip, after which you can only withdraw money from an ATM with a file. Seal the magnetic strip with tape. The card will still be read: the adhesive tape will not affect the signal transmission.

02

hide things

For home caches, this method will also work, but it works best in hotels. Unlike burglars, hotel thieves don't think that you can have a secluded spot in your room. Therefore, calmly stick your wallet and other valuables with duct tape under the bed, table or chair.

03

Save yourself from the frost

In an emergency (you're in a sweater in the winter forest, and in your pocket there is only a roll of tape), wrap your light clothing on top with duct tape, and you will become much warmer. Scotch tape is an excellent insulator of heat and moisture, and besides, it will not blow you through. And open areas skin (face) can be covered with tape to protect against frostbite.

04

Show focus

The trick with the balloon that does not burst after being pierced with a needle is invariably a delight to anyone who performs this trick.

Turn the balloon inside out (this is easier to do until it is inflated) and stick two pieces of tape opposite each other. Inflate the balloon and make holes with a thin knitting needle in the places where the adhesive tape is pasted. Watch the result. Try to repeat the same with the wheels of the car.

05

Get a splinter

After playing on wooden spoons splinters often remain in the palm. If the tip of the splinter is peeking out, try applying duct tape. Apply adhesive tape to the affected area of ​​the skin. Pull it up in the same direction that the splinter entered.

06

mend lace

You were finally released from your cell and your belt and laces returned. You were about to go home, but you can not put the fluffy ends of the laces into the small holes, it would seem, intended for them. Ask the investigator for some sticky tape and wrap the frayed ends with it. Well, now the laces will still serve you until the next drive to the police.

07

Don't worry about the child

Is your child constantly sticking his fingers into sockets because he still doesn’t understand that they won’t get through anyway? If you are tired of explaining this to him, seal the holes of all easily accessible outlets with tape.

08

Remove price tag

While the best minds in the world are busy solving the problem of how to quickly remove the plastic packaging from the CD, it seems that no one cares about another, no less important problem: how to peel off the price tag so that there are no traces of glue left? Fortunately, this is easy to do. First, tear off a piece of paper with a price with your nails. And to remove its remnants, use the sticky side of the adhesive tape, making blotting movements over the particles of glue and paper.

09

Make a sculpture

To replenish a museum of modern art with a concept piece, you don't have to stick nails to a dog in an aquarium. Make a Scotch Sculpture! Choose an object (a doll or a plush centaur) to serve as a model. Wrap the figure tightly first cling film. Wrap the tape on top just as carefully. Now, with the help of a clerical knife, cut the film and let the doll out. Stuff the resulting frame with cellophane, paper or dried mushrooms. Seal the seams with the same adhesive tape and name the sculpture something more original (for example, "Constancy Opposition-8") and immediately start making the next soft figurine for your first solo exhibition.

10

Save someone's life

Fencing with skewers at a picnic can result in a penetrating wound in the chest cavity. So that the victim does not die from asphyxia due to the alignment of external (atmospheric) and intra-abdominal pressure (if air enters the chest cavity, the lungs will not be able to straighten out), immediately force the wounded comrade to exhale, then quickly clamp the wound with your hand and seal it with tape. If your friend passed out in surprise, before closing the wound, sharply press on the chest, helping to exhale.

And now run for the doctor! If you don't hurry, the kebabs will be cold by the time you get back.

11

Prevent the appearance of corns

You have to walk another ten steps to the car, and you feel that a callus will soon appear on your leg? Tape the problem area with tape and continue your hiking journey.

12

Don't itch

According to the expenditure of effort and the amount of satisfaction received, the process of scratching mosquito bite has no equal. But you can't get too carried away. You comb your leg to the bone, the nail breaks off, gets into the blood, goes through the vein to the heart and - yeah. Cover the bite with duct tape so you can't scratch it. Peel off the tape after a couple of hours. At this point, the poison will no longer work.

13

Do not spoil the wallpaper

Before piercing the wallpaper with a needle, stick a piece of adhesive tape on the place of the future puncture. This will prevent the paper from tearing, and will also allow you to hang such massive things as the MAXIM calendar on just one needle.

14

stop the blood

So that a deep cut does not prevent you from waiting for a swift ambulance rushing towards you at the speed of a doe shot by a hunter, squeeze the edges of the wound and wrap it with tape from above. Of course, the wound must be clean.

15

Do you want to prevent scratches on the surface of the Tudor-era table caused by contact with a Putin-era ashtray? Then stick a few strips of tape on its bottom. After that, you can ruin the table only if you miss the ashtray and put out cigarette butts on it.

16

Do hair removal

18

Help the postman

Address written on the parcel gel pen, can spread if water accidentally gets on it (for example, from a broken heating pad that you send). Tape the letters and numbers. Then the parcel that you sent to Montreal will not get to Mariupol.

19

Don't lose the screws

Suppose it occurred to you to disassemble your wrist watch to see if you can collect them later. Your chances will increase if, during work, you put a tape of adhesive tape next to you, on which you will put all sorts of screws and gears so that they do not roll.

20

clean clothes

You cut the red wire instead of the blue one and the vacuum cleaner exploded, covering you from head to toe with what was inside? Roll up a sticky ball of tape and go over your clothes with it. If you were wearing a sweater at the time of the explosion, then at the same time you will get rid of woolen pellets.

Once you start using things for other purposes, it's hard to stop. And this is understandable: removing stains from clothes with lemon is much more interesting than eating it. Therefore, we have prepared 11 instructions for you at once on the topic "How to use things for other purposes." Watch for their appearance on the appropriate.

Before you directly use double-sided tape, you will need to choose it correctly.

To date, there are three types of adhesive tape: foam-based, film and special tapes, which are indispensable in difficult situations.

First type double sided tape found wide application in construction business. It is great for bonding uneven surfaces, objects with complex shapes. In the presence of irregularities, roughness, the area of ​​\u200b\u200bthe bonded surface decreases and adhesion deteriorates, therefore, such adhesive tapes always have a more adhesive base, which helps them securely fasten all kinds of elements.

In the event that it is planned simple work for gluing even surfaces, double-sided tape is suitable.
Special tapes are indispensable for complex work e.g. at high temperatures. Often they are used for gluing large items that cannot be attached with simple glue.

Double sided tape technology

How to properly use double sided tape? To fasten the surfaces together, the first step is to select the desired adhesive tape. In the event that it is necessary to fasten materials of different quality, then the film is removed from the surface of the tape, and it is applied with the sticky side to the surface that is more porous. It can be wood, polystyrene. After applying the adhesive tape to the first surface, put another one on top of it, hold it for some time, pressing it.

If it is necessary to glue simple objects, for example, paper, then the adhesive tape can be applied immediately and only then remove the surface film and stick another object. It is important to remember that the area for adhesion of materials should be as large as possible.
Double sided tape can be different widths, therefore, it is necessary to choose it correctly depending on the work performed.

Very often, after applying adhesive tape and fastening objects, there are irregularities, which is why it is necessary to remove the adhesive tape and carry out the procedure again. At the same time, the adhesive tape leaves marks on the material that are difficult to use with improvised means. For these purposes, special cleaning solutions, such as Antisilicone, alcohol, are suitable.

The technology for applying double-sided tape is simple, you just need to choose the right adhesive tape.