DIY crafts from old things - great decor, photos and ideas. Bright planters from old T-shirts How to make a planter out of a T-shirt

Today you will find tons of information about what crafts you can do with your own hands from old things. It would seem that objects that can be easily and quickly given a second life have long been known to everyone. And all the ways to update and remake them too. However, this list is constantly expanding. Still don't know what to do with old things? Check out the ideas in this article. In this collection you will also find quite unusual things that can be used for crafts.

Wine cork design and decor ideas

The first thing we'll start with is wine corks. They are associated with the holiday good mood, a pleasant company, create a feeling of comfort and warmth. That is why their use in the interior is so common. In general, we have an excellent article entirely devoted to crafts from wine corks:.

To make the ecological coasters shown in the photo, you will need about 25 wine corks, a glue gun, sharp knife and thin cork sheets. First, cut each cork in half lengthwise. Then, stick the resulting bars on blanks cut from cork sheets. The edge of the product can be masked with linen thread. Attach it with glue too. Apply glue in small amounts to avoid unsightly drops.

The second option for crafts with wine corks is even simpler. In this case, they can be used as card holders, which may come in handy during the holidays. In this case, wine corks should also be cut in half, vertically. Take the resulting halves and make a horizontal notch across, which will perfectly fit the size of your cards.

You can also make an incision from above using a knife. Mark it in the center so that the card does not fall out. Make the groove not too deep.

Crafts from old things for a summer residence or at home

Do you buy food in plastic containers that you can only throw in the trash? It is not always so. plastic containers can be used for storage various items. In this case, for storing pasta.

Rinse and dry container thoroughly. If it has any stickers on it, try removing them. Then choose any spray paint in a spray can, turn the container upside down and paint it on all sides. After the paint has dried, stick a sticker with the name of what will be stored in this jar.

New life for old things: unusual crafts for the home

Many do not know what to do with their old T-shirts, so they are often just thrown away. We offer Alternative option. Try to make a beautiful hanging pot for flowerpots out of an unnecessary T-shirt.

Crafts from old things: a beautiful planter from an old T-shirt

To get started, choose a T-shirt that does not have any decorations on it. The planter will look beautiful if you use a fabric of one or more colors. Instead of a T-shirt, you can also use a kitchen towel.

Lay the T-shirt on a flat surface and cut it into 8 strips 3 cm wide. Twist the strips so that they form bundles. Gather them together and tie in a knot, leaving a small bun. Then, on every two strips, you need to make a common knot. Then tie adjacent ropes at the same distance. Get a grid with large cells. Make so many rows that the pots come up in height to the pot. At the end, tie all the bundles into a common knot again and secure the hook so that it can be hung. Ready!

Photo: crafts of old things

For a homemade gift, bottle clothes can be a great idea. The good thing is that you can use an old thing, in this case a sweater, and any bottle in such clothes will look original.

Crafts from old things with your own hands: clothes for a bottle

The easiest way to wear a bottle is made from a sleeve from an unnecessary sweater. To do this, simply cut off the sleeve from the old sweater. Then puff around the neck of the bottle with a regular thread. At the end, sew the bottom to the sleeve or glue it with glue.

Do not forget to decorate the resulting clothes beautifully. If the bottle is for a specific person, you can decorate it with the appropriate initials.

Do you have old jeans at home that you don't want to throw away? Make them into useful things for your home. Bags, rugs, pillows, shorts, skirts are just a small part of the options. It will be very easy and simple to make a bag with your own hands. To do this, look for old jeans. Cut off exactly one leg with scissors and simply stitch the bottom of the future bag.

DIY crafts from old jeans

You can also do unusual crafts from old things for giving and at home. You will need all the same jeans, a triangle pattern and a long rope. It is not necessary for the triangles to be the same color. Such decoration will look appropriate in any case.

If you want to add some nostalgia to your home, check out this one. original idea. You will need two old handsets, a strip of metal for the base of the stand, drill bits, screws, and felt to keep the stand from scratching furniture.

The second life of old things: an original do-it-yourself craft

Make such a stand in vintage style not hard at all, but it will look very unusual.

DIY jewelry organizer

You can always buy a jewelry box or stand for your jewelry, but you can also make your own jewelry organizer. So, any mesh material is suitable for storing earrings. It's pretty convenient way store your jewelry - all earrings hang in pairs, and you will quickly find the ones you need.

In addition, such an organizer can be used as an independent wall decor. You can use as base material wire mesh, canvas for embroidery and the like. Place the net in any frame and hang it on the wall.

Do-it-yourself key holder from Lego parts

For such wall key holder you will need some Lego pieces. Choose the base based on how many keys you will hang on it. Then choose the right Lego parts and put them on your key ring. Really great idea, is not it?

The main task that is set before the planter for the garden with your own hands is to create a beautiful, unusual and functional decor for a pot that will emphasize the beauty of a flower and decorate any interior. Often people confuse a pot with a planter, but if the main task of the pot is plant growth, which is impossible without drainage, correct composition soil and volume, then the planter is created in order to make it look a simple pot unbanal.

Choosing a material

Depending on the budget and needs, planters can be bought in the store, but it is always more interesting to make it yourself. Before buying items for product decoration, you need to consider some details:

What should the product be?

1. durable;
2. fit into the interior;
3. comfortable and productive for the plant.

Base pot

• The plastic version is universal. Available in various sizes and configurations plastic pots. The main advantage is that any material is quickly and reliably glued to plastic. Choose plastic light shades, since such a pot will heat up less in the sun. Moreover, in such a planter, the plant is less susceptible to the development of harmful microorganisms.

Plastic is good because, if necessary, additional decorative or drainage holes can be easily made in it. minus y plastic planters one is short-lived. When used at home, nothing threatens him, but if the container is in the garden, Sun rays over time, they will do their job and, under the influence of ultraviolet radiation, the product will become thinner and begin to crumble.

Everyone can make a hanging planter with their own hands, because there is nothing complicated about it. It is important to choose a suitable basis, materials, and decide on the technique of execution.

From what you can make a flower pot for an apartment:

This is only a small fraction of the materials with which you can ennoble ordinary flower pots.

Cache-pot from skewers

The first and simplest version of a homemade planter is made on the basis of the most common, preferably plastic, pot. To outside containers for glue, elements of the same size are densely attached, suitable for a pot in height. To do this, you can take wooden or plastic skewers, ice cream sticks, even willow twigs. Most original version- take sharpened colored pencils of the same length as decorative elements.

Such a planter can be made both by yourself and together with a child who will be interested in sorting out and gluing the selected elements. Pencils or sticks are laid out in one row on the table so that they form a straight line along the bottom border. After making sure that all the sticks are the same length, you can simply glue them to the pot one at a time, or you can glue a piece of string or fabric tape and glue it on a row of sticks or pencils.

After one rope is glued, the next is glued with an indent of a few centimeters from the first. When the glue dries, you need to make sure that all the sticks are firmly glued and can curl around the pot. The whole design should resemble the well-known bamboo rug, which is used for making sushi or for table setting. The product can be added satin ribbon any color by wrapping it around the bottom of the planter.

Cache-pot from old books

For succulents and other varieties undemanding plants , designers often create very creative models. Some types of plants can survive in almost any environment, such as vertical gardening, semi-enclosed space or in tiered planters like a green waterfall. Phytodesigners embody the most bold ideas in the apartment interior and in the garden. If for an azalea or begonia, first of all, you need to pick up correct soil, pot, drainage and lighting, then almost any land and container is suitable for cacti.

Excellent pots are obtained from old unwanted books or Soviet wooden boxes. A hole is cut in the cover or inside a thick book. The entire paper surface of the book, especially the edges, is heavily processed PVA glue or any silicone adhesive so that a waterproof film forms on the paper, which will protect the pots from moisture during watering. When the glue dries, you need to put a suitable pot with a plant in the hole, the edges of the pot should not protrude. From above, everything is covered with small pebbles, crumbs or gravel, completely hiding the presence of the pot.

In this way, you can decorate multi-level planters with your own hands, giving huge old dictionaries and other voluminous books a second life. At the same time, the older the book, the more beautiful the cache-pot will turn out.

Knitted sweater for indoor plants

The use of non-standard forms or unusual textures are typical for fashionable planter options. Recently gaining popularity knitted planter covers.

For knitting, you can use any thread, and as a tool - a hook or knitting needles. The appearance will also differ from the selected tool. If you use knitting needles for knitting, you can decorate the product with patterns in the form of braids and cones. So the plant will be as if dressed in a sweater. Crocheted products can be decorated with embroidery and appliqués that will look very gentle and cozy.

Knitting is done using a circular element, used for weaving napkins or socks. When the required diagonal is reached, you just need to stop adding loops, knitting only the same row sizes. At the same time, the canvas will grow in height, without increasing in diameter. At the very end there will be a slight increase in the diameter of the pot, so you will need to add a few additional loops to expand the product.

In this version of the product, it is important to take into account the further possibility of hanging the plant, or additional decoration. That is why the pots must be as durable as possible. It is very important that the product is easy to take off and put on so that you can wash the sweater for the "green pet" if necessary.

If complex needlework, which includes knitting, is still in the process of being mastered, such pot-sweaters can be made even more in a simple way. For this you need to find several knitted sweaters with a suitable ornament or pattern. We are talking about several pieces, since a single knitted planter does not look aesthetically pleasing, but a few elements of such a decor that will be in harmony with each other will greatly decorate the room. Simple knitted planters are most conveniently made from sleeves or necks. After the knitted base is finished, you can decorate it with beads, buttons or ribbons.

Hanging planter for garden flowers

In open space, knitted crafts quickly become unusable and lose their former charm in a matter of days. That is why for garden planters you need to take inexpensive, or even free materials, which can serve as long as possible, and if several months, then it will not be difficult to make a new one.

What is in every house in sufficient quantity and color scheme, and even got it for free? Of course, This plastic bottles . Nice crafts from transparent material adorn almost everyone garden plot, so why not make original hanging planters from existing bottles? A plastic bottle is the perfect source. It can be cut into 2 parts, make holes in the bottom, decorate a little, and get an almost eternal "pendant miracle" for garden flowers.

You can put in the same bottom part upper part bottles neck down, planting a flower there. After a slight decoration at your discretion, you get a wonderful double voluminous planter. The bottle in the process can change beyond recognition. For example, you can make flower pots in the nursery. To do this, cut out the muzzle of a bunny or a cat along the edge of the bottom of the bottle, paint it with paints and put a plant there. There are a lot of options, you just need to wake up your imagination.

Hanging planter from a T-shirt

You don't have to throw away your old t-shirt, because from it you can make a bright planter in the style of macrame. To do this, you need to cut the T-shirt across into equal two-centimeter strips, and then tie them into a bundle at the base. The hanging ends need to be woven together so that it looks like a basket. The other end is also tied into a knot and for it the product is hung on a wall or ceiling. A pot with a flower is placed in a wicker basket.

Planters for the garden of slippers

For all gardeners who love crafts, the following method of recycling old flip flops or ordinary home slippers gone into oblivion. In addition to the main element, you will need small containers that will fit tightly between the sole and the rubber bands on the shoes, acting as a pot. To do this, you can take old ceramic cups, plastic cups, the bottom of a plastic bottle or an ordinary small flower pot. You can play up the marine theme by gluing sand and a few shells onto the cup.

Provided that the pot with the soil and the plant will not weigh too much, the design of the flip flops will securely fix them. Flip flops are attached to the wall with nails or self-tapping screws for the sole, after which a fragile part with the plant itself is installed. Flip flops look best in a pair.

Cache-pot for a garden from boxes

A design trend in a summer cottage or garden plot? Why not! An ordinary seedling box is knocked down from boards, and a fashionable designer pot consists of boards knocked down into the shape of a box. There is no difference, so every gardener can decorate his site ordinary wooden box from under the fruit to be varnished or artificially aged with sandpaper. After the work done, the box is covered with a protective glaze so that the product lives longer under any weather conditions.

Wicker basket planter

In the garden or in the country, you can often see a lot of ownerless baskets, which can also be used for multi-level planters. If such wicker coasters are placed alone, they will most likely look a little lost, but if you do vertical gardening fence with the help of several baskets, all the neighbors will envy this decor. The ensemble will look more interesting if milky enamel is applied to the weaving.

The same principle can be used with several ceramic teapots as a basis, which can also be coated with colored enamel or painted in any color you like. You can find several old teapots at home, and ask your neighbors for some, or buy more at the "flea market". Teapots of different configurations look perfect, but in the same color and with the same decor. Such an element of the exterior, of course, will be appreciated by all passers-by.

Hanging planter for trees

Since most of the garden is occupied by trees, it would be foolish not to decorate them with hanging flower pots. garden plants. It can be woven using improvised materials, using the macrame technique. The main task of such a product is to create a reliable mount that will withstand the weight of the pot, earth, flower, rainfall and wind. At the same time, the plant should feel comfortable and not break off flowers and leaves on the thread. The ideal number of cords is 3-5 pieces. In this case, it is necessary to calculate that all fasteners are made to the nearest millimeter, otherwise the flower will hang asymmetrically.

In a wicker hanging planter, you can add an internal detail that can be made from almost anything, for example, from a soccer or basketball ball, floral linen, halves of plastic bottles fastened together in which you can plant different flowers.

Macrame-style pots for houseplants

Hanging planters or ordinary tabletops are often made in the macrame style, which simply cannot be limited by anything. For weaving, you will need dense threads, ropes or fabric strips. If you master this technique, you can create simply unthinkable products, weaving twigs, pebbles, flowers and beads into the product. At the same time, each time a completely original product is obtained.

All materials and schemes can be found in specialized stores for handmade or on the Internet. Mastering the macrame technique, of course, you will have to spend a little money on materials, but in the end you will be able to create fashionable designer planters for yourself, for sale or as a gift.

Cache-pot from an old chest of drawers

In autumn and spring, all gardeners put things in order in houses, gardens and just on window sills with flowers. After such cleaning, as a rule, a lot of seemingly unnecessary things go to the landfill, and possibly furniture, from which you can also make garden decor. Great products are made from old rough shoes, chests of drawers, laundry baskets.

chest of drawers with drawers can be placed in the garden by pulling out the drawers in different ways. It is not necessary to fill the ground inside, as this will significantly shorten the life of PVC furniture. Smaller flower pots are placed in the boxes and covered with floral linen, moss or pine needles. To water the flowers, it is better to remove the pots from the box in order to prolong its life.

Burlap as a cache-pot

This, at first glance, rough material can become excellent design tool skillful hands . The fabric can be left a la naturel or dyed in any color, and then wrap the pot with it. Thus, pots different in design, shape and material can become one ensemble. You can also sew the edges of the fabric like a bag, decorate it with coffee beans and twine. If you need to securely fix the pots on the pot, you can use glue gun, but washing such a product, if necessary, will not work.

Under the planter, you can organize any material and any product, you just need to show a little imagination. Any skillful hands old thing can turn into a designer dilapidated planter that will perfectly fit into the interior and exterior.

Outdoor flowerpots and hanging baskets for flowers will help diversify any interior and garden plot. They can be easily made by hand. Anything can be used as a material: concrete, leather, cords, wood. It all depends on the size of the plant, its weight along with the ground and the style of the room where the flowers will be placed. Hanging planters will fit into any style of interior, you just need to show imagination in their manufacture.

It seems that it is unrealistic to make a garden planter for indoor flowers made of concrete at home. In fact, even fragile ladies can do this work, as it does not require serious physical effort. . Concrete can be cast in packages from yogurt, cookies, milk. Any plastic or cardboard container will do.

You can buy cement hardware store, but its disadvantage is that it produces too much dust. Therefore, it is better to buy ready-made concrete mix in art stores.

To cast a pot, you need to take two forms - a large one for the outer contour and a small one for the inner one. You need to insert them one into the other and check how thick the walls of the pot are. If the result suits you, you can get to work.

In an unnecessary bucket, you need to dilute the cement with water. Usually the ratio is 1:10, the consistency of sour cream should be obtained. It's best to follow the instructions on the package.

You can start filling. Pour the mixture about 1/3 into a large mold and insert a small mold. It must be fixed in strict vertical position with tape.

After 2-3 days, the mixture will harden. When the concrete becomes hard, you need to remove the molds. They are easily removed, but if it doesn’t work out, you can cut it with a clerical knife.

The final stage in the manufacture of planters for the garden is skinning. petty sandpaper you need to remove all the bumps on the surface. After that, you can plant plants or insert pots of earth inside.

Wooden hanging pots

Outdoor pots can also be made from wood. But as a material, you need to select hardwoods that are resistant to temperature extremes and moisture.

Wooden flowerpots have a number of advantages:

• Low manufacturing cost.
• Service life up to 10 years.
• No special crafting skills required.

The simplest flowerpot that can be placed in the yard can be made from a stump. This is an excellent workpiece that practically does not need to be processed.

Stages of work:

1. 1
   1. Using a saw, you need to cut off the stump of a suitable size.
   2. 2 Drill with a long and thick drill to make several holes at the same distance from the edge of the stump. You also need to make holes in the middle to destroy the core of the tree.
   3. 3 The core is cut out with a chisel. The edges should be even and thick enough to support the ground with the plant.
   4. 4 In the middle, you can lay polyethylene, fill in the ground and plant flowers or put a pot.

For a summer residence, you can also do wooden bookcase under plants. floor structure can be placed outdoors, on the terrace or in the house.

Procedure:

1. 1 As stands, you can use ready-made furniture boards round or wooden form. They can be cut to size in the store or purchased blanks for shelves.
2. 2 Shovel handles are ideal for racks and legs. They need to be cut into equal segments.
3. 3 From blanks, you can make a design of any shape. Depending on the idea, you need to prepare holes for fastening on the shelves.
4. 4 All parts must be sanded and painted before final assembly. If the structure will stand on the street, it is better to cover it with moisture protective agents.
5. 5 The last stage is the assembly of parts.

From newspaper tubes

Hanging planters on the wall should consist of two parts - a metal holder that is attached to the wall, and a decorative part into which the pot is inserted.

Decorative flowerpot can be made from newspaper tubes. The advantages of this material are low cost and attractive appearance after painting.

Weaving from newspaper tubes is not the easiest thing to do, but it's worth it. To begin with, it is better to practice on simple weaving and small items to fill your hand. Over time, you can include interesting knots and tricky weaves for a decorative effect.

You will need:

• newspapers;
• spoke;
• glue;
• scissors;
• stain.

Stages of work:

1. 1 As a basis, you can take a pot or a jar.
2. 2 From newspapers and knitting needles, you need to twist the tubes.
3. 3 To weave the bottom, you need to take 8 tubes and arrange them so that you get a square. This central square is braided with other tubes. When the bottom reaches the size of the pot, you need to finish weaving and glue the end.
4. 4 The pot must be placed in the center and the tubes of the base should be bent around it.
5. 5 The walls of the cache-pot are made by the most simple weaving around to the top. It is important to ensure that the planter repeats the shape of the pot.
6. 6 The base tubes are tucked in through the holes in the weave and glued after work is completed.
7. 7 The final stage is the coating of the pots with paint.

From an old t-shirt

Hanging high planters are conveniently fixed on the ceiling. The material used for them is fabric, old T-shirts, leather, twine, yarn, nylon ropes. Macramé planters are good idea for recycling old t-shirts or scraps of fabric.

How to do:

1. 1 The T-shirt must be cut into 8 strips 3 cm wide. Each is pulled into a tourniquet.
2. 2 All strips must be taken together and tied into one knot.
3. 3 At the same distance from the beginning, the strips must be tied in pairs.
4. 4 At the same distance, you need to make knots from adjacent strips. You should get cells.
5. 5 Make one more knot on adjacent strips.
6. 6 Insert a pot with a house plant in the center and tie the strips from above into one knot. Hang on mount.

Other materials

The macrame technique used to be popular in the USSR for making hanging planters for flowers. Today, the art of knitting knots is once again gaining popularity among lovers of home comfort.

There are many types of knots - simple and complex. Studying them all is not an easy task. To make a suspension for a pot, there are enough household knots that are familiar to everyone. If you want to turn a planter into a work of art, you can learn the technique of tying knots from videos and photographs.

Knitting lovers can make beautiful pendants from yarn for flower pots. They can be crocheted or knitted. But it is worth considering the properties of the yarn - it should not stretch much, otherwise the planter will fall to the floor. Also, the yarn must be strong enough to support the weight of the plant.

The most difficult to make at home are pots made of ceramics. To do this, you need a potter's wheel, clay, a kiln for firing. If desired, you can do interesting pot and without a circle, just blind it with your own hands. But it will take much longer.

For the manufacture of planters, any materials that are found at home are suitable: plastic bottles, metal, pebbles, copper and plastic tubes. It all depends on the imagination of the author.

Decorate the house cute flower pot, woven using the macrame technique is possible, even if you just saw this word for the first time.

The technique of nodular weaving "macrame", and planters woven in this technique, have always been a popular solution for the interior. Only the details have changed. Once upon a time, thick cotton thread and intricate patterns were in favor, now simple weaving techniques and bright materials for flowerpots in macrame technique.

Weave flower pots from old children's t-shirts using macrame. It will turn out beautiful and unusual. Plus, it's a great idea for a .

If the idea is to give old things new life you liked, articles and will also be useful to you,

And a couple more ideas for using t-shirts: and

Photos of the master class and detailed explanations will make macrame understandable for beginners, and the planter will turn out to be cute and homely.

How to make a flower pot with your own hands using macrame technique

You will need:

• Knitted fabric
• Ceramic flowerpot
• Measuring tape
• screw hook
• Scissors

How to make a flower pot for flowers with your own hands using the macrame technique - image number 1 "\u003e

1. Cut their fabric into 8 strips of 4 cm each. Stretch them so that they curl into ropes.

The strips do not have to be perfectly even, as the edges will still be bent inward.

2. Gather all the strips together and tie into one large knot. The knot should be located 10 cm from the ends. Tighten as hard as you can, as this knot will hold the weight of the flowerpot.

3. Divide the bunch of knitted stripes into four pairs, and tie each pair into a knot at a distance of about 5 cm from the previous knot.

4. Regroup the strips by gathering 2 again and tying a new knot, again at a distance of 5 cm from the previous one.

5. Regroup the strips again, and tie another knot.

6. Insert a ceramic flowerpot into the resulting “basket” of interlaced strips, and tighten the knots so that the macrame planter tightly fits the flowerpot.

7. When the dimensions of the pots are adjusted with your own hands, tie the free ends of the knitted strips into a common knot at the very end.

8. In a flowerpot, you can hang a planter on a screw hook.