DIY organizer: stylish and practical models for needlework, writing and work. Do-it-yourself office organizer from boxes and cans: master classes Organizer for cardboard notebooks

Organizer- an irreplaceable thing in the house for storing not only every little thing, but also some valuable things. Such a convenient and necessary little thing can be purchased at any supermarket.

Or you can turn on your imagination and do it yourself. And we will help you create an organizer for any occasion.

How to make an organizer with your own hands?

Making a box for storing all sorts of things is not difficult even for a beginner. You will need material, stationery and a little time.
Materials for organizers of things are usually created from improvised things, of things that go to waste or in rare cases necessary components are bought.

A small organizer for hairpins and elastic bands with your own hands for beginners

Surely, more than one girl has experienced the mess in her hair accessories. There are a lot of them, but they are not always in place. So, in order to put the elastic bands with hairpins in a decent order, you need to put them in one place. The place should be beautiful and comfortable.

You will need:

Frame;
ribbons;
hooks;
glue;
scissors;
ruler;
cardboard.

Progress:

Measure your photo frame and cut the ribbons to size. Stick with reverse side with a gap of 3 cm.
Then measure a sheet of cardboard and cut it to fit the photo frame, glue it over the ribbons on the back of the frame.
Glue the hooks on outside frames, placing as you wish.
Now you can hang the photo frame on the wall or put it on the table.

DIY office organizer

To find a pen, some need to search the whole house and turn everything upside down. But if you have a stationery organizer, you won't have to go far looking for pencils and pens.

You will need:

cardboard;
pencil;
tourniquet;
6 cans;
paper;
scissors;
glue;
paint in a can;
ruler.

Progress:

Glue the jars with glue and cover with paper.
Make a handle as in the photo and wrap it with a tourniquet.
Then paint the jars and leave to dry.
Make the jars in pairs, inserting the handle in the middle, wrap everything with a tourniquet.

DIY underwear organizer: step by step instructions with photo examples

The creators of furniture for things did not think about how they would be stored there. And in most cases underwear suffers. Few people fold their laundry neatly at all times. Therefore, you can use a little trick and add a linen divider to the closet.

You need:

shoe box;
glue;
scissors;
ruler;
stationery knife;
pencil;
paper for decoration.

Progress:

Measure the height of the cabinet where you want to place the organizer. Cut according to size.

Determine how many cells you need and measure them to fit the box. Cut out the partitions.

Checkout inner surface storage box.

Checkout appearance organizer.

You should end up with a beautifully decorated box on all sides.

Determine the size of the cells and make cutouts on the partitions on one side. The number of cuts affects the size of the cell, the more of them there are less space for storage.

Decorate the partitions by pasting them with paper on all sides.

This is how easy it is to make a box for storing clothes.

DIY cosmetics organizer

Don't have time to buy a decent cosmetic bag for your beauty arsenal? Or do you have so much of it that the toilet bag is breaking? Then a magnetic board for cosmetics will help you.

You need:

large photo frame;
magnetic sheet according to the size of the photo frame;
small magnets for each beauty item;
paper for registration;
glue;
scissors;
ruler.

Progress:

Measure the inner perimeter of the frame and cut the magnetic sheet along it.
Do the same with the design sheet.
Put a decor sheet in the frame, then a magnet and close everything with a frame lid.
Glue magnets to all makeup items.
hang on comfortable spot.
The organizer is ready, now you won't lose anything and everything will always be in one place.

How to make a handy jewelry organizer?

There are never too many decorations, you just need to find a capacious storage for them. A variety of boxes take up a lot of space, and besides, decorations are sometimes confused in them. Therefore, we offer you Alternative option to store jewelry.

You will need:

frame;
metal grid;
pliers;
paint in a can;
furniture stapler and staples for it;
hooks.

Master Class:

Place the mesh on the back of the frame and secure with a stapler. Trim off excess tails with pliers.
Turn the frame over and paint with paint, wait until it dries.
Hang hooks, and you can hang decorations on them. By the way, for some jewelry, hooks may not be needed.

Large shoe storage organizer

Storing shoes in boxes is not always convenient, and often it takes up a lot of space. So why not make one big organizer for shoes?

You will need:

plywood;
electric jigsaw;
roulette;
pencil;
wood glue;
the bars are thin;
self-tapping screws;
sandpaper;
iron rod;
iron mechanisms for scrolling;
dye;
drill.

Progress:

Cut out circles from plywood sheets, choose the number of circles according to the number of pairs of shoes.
Finish the edges with sandpaper.
Cut out partitions from the bars for each section of the cabinet. Count that for one you need 6 pieces.
Make a hole in the center so that the cabinet turns.
Assemble the cabinet: plywood circle + crossbeams + plywood circle + iron mechanism and so on, repeating the steps.
Insert a rod through all departments.
Build a stand for the organizer and place the box on it.
Paint the organizer, wait for it to dry, and put your shoes inside.

Headphone Organizer

Often the headphones are lying around and confused. This is very unpleasant and takes a fair amount of time to unravel. Therefore, we have prepared an interesting life hack for you so that your headphones are always in order.

Prepare:

funny pictures 2 pcs;
paper;
glue;
scissors;
double sided tape.

Course of action:

Cut out the pictures.
Prepare a 5x10 piece of paper.
Fold the paper in half and glue the picture on each side.
WITH inside Secure the top with double sided tape.
Now you can wind your headphones and not worry that they will get tangled.
You can replace paper with felt, and use buttons as fasteners.

Do-it-yourself organizer for small things: ideas with photos

To organize a trifle in one place, it is enough to create interesting place for its storage. Then she will always be at hand. A creative box will fit perfectly into your interior.

DIY folder organizer for papers and documents

Papers, like other work supplies, should be visible and in order. And so that they are always at hand and look good, build a storage folder yourself.

Required tools:

colored paper;
beer cardboard 2 pcs;
glue;
scissors;
ruler;
decorative paper.

Master Class:

Cover the beer cardboard with paper for decoration.
Cut sheets of paper 1 cm smaller on each side than beer cardboard.
Using 2 long pieces of paper, make an accordion out of them. Bend 1 cm, and glue sheets through each span.
Cut the paper for the crust and connect the cardboard, as in the picture in step 4.
Glue the accordion with sheets. Your folder is ready, fold your papers.

DIY craft organizer

Craftswomen-needlewomen have a lot of gizmos that need to be stored somewhere. We suggest you make a box for small items.

You need:

thick cardboard;
glue;
scissors;
pencil.

Progress:

On a piece of paper, draw a future box in folding form. Draw a handle on top for convenience. On the second sheet, make a drawing of exactly the same box.
Cut out the drawing, fold along the fold lines and glue.
Place them back to back and glue.
Design the box as you like and use it.

Try the option for storing ribbons and ribbons, for this box you will need:

shoe box;
eyelets;
paper for registration;
scissors;
glue;
pencil;
ruler.

Progress:

Cover the lid and box with paper for decoration.
Mark points for future holes with a ruler and pencil.
Attach eyelets.
Lay the tape inside and thread through the holes.

DIY crib organizer

For young mothers we have prepared handy organizer which can be hung on the bed. You can put the most necessary things for the baby in it.

You need:

textile;
scissors;
ruler;
threads;
sewing machine;
inlay;
buttons or buttons.

Master Class:

Decide on the dimensions and cut the fabric according to them.
To seal the organizer, cut out exactly the same piece of fabric for the base, stuff your future organizer thin layer synthetic winterizer and sew.
Make pockets of different sizes.
Make handles for fastening.
Sew along the edge of the trim, attach pockets and handles.
Make fasteners from buttons or buttons.
Your organizer is ready, use it to your health.

DIY kitchen organizer

The kitchen for every housewife is hers personal account a place where masterpieces are created. Therefore, in order to focus all the tools for creating unique things in one place, we have prepared two organizer options.

For the first option you need:

adhesive wallpaper in 2 colors;
cans of chips (pringles);
scissors;
tape measure.

Progress:

Measure the diameter and length of the can and transfer the data to the wallpaper.
Cut out required size and wrap the jar.
Draw on the wallpaper of a different color a sign of the utensils that will be stored in the box.
Cut out the sign and stick it on the jar.
Put the organizer in a convenient place. Such storages can be made for each group of items.

The second version of the organizer is adapted for interesting storage cups. For him you need:

small boards;
thick tourniquet;
hooks;
screws;
screwdriver;
staples;
ruler;

Master Class:

Connect all the boards with staples using a screwdriver.
On the reverse side, make a mount and tie a tourniquet.
Screw on the hooks.
And write funny inscriptions with chalk to decorate the board.
Hang the organizer on the wall and hang the cups.

Do-it-yourself car seat back organizer

Some families need car organizers, especially those with small children. Just for such families, we have prepared a master class on making a hanging box.

You will need:

textile;
scissors;
sewing machine;
threads;
Velcro;
inlay;
straps;
decor elements.

Progress:

Measure the seat of the front seat and transfer to the fabric of the inside.
Draw the pockets. Then cut out all the components.
Sew the trim along the edge of the main fabric and onto the pockets at the top.
Sew pockets and fastening straps.
Attach decorative elements.
Now your child will not be bored, and things will always be in one place.

Do-it-yourself organizer in the trunk of a car

Sometimes in the trunk everything is upside down. And it takes a lot of time to clean up. But there is an alternative - make a wardrobe for things in the trunk of your car yourself.

You will need:

soft fabric;
plywood sheets;
self-tapping screw;
screws;
screwdriver;
pencil;
roulette;
glue / sepler with staples.

Progress:

Measure the dimensions of the trunk and transfer them to a sheet of plywood to make the bottom. Then make the same cover.
Saw the partitions according to the required height.
Insert one at a time and fasten with a screwdriver.
Cover the cover with a fabric, preferably similar to the one in the car.
Fasten it with a stapler or glue.
Put an organizer in the trunk and fold things.

How to make a hanging bath organizer with your own hands?

An interesting organizer for the bathroom can be made from jars for storing cereals. To create something like this you will need:

board;
jars for storing cereals;
screws;
screwdriver;
iron fasteners of a round shape;
ruler;
pencil.

Work process:

Mark the points on the board where the jars will be attached.

Attach jar holders.

Have you already bought notebooks and pens for your little schoolboy? If not, hurry up. The first of September is just around the corner.

You need to know, and at the same time save time and money. And when everything you need is already there, you need to understand what to do so that all pencils, pens, felt-tip pens do not lie around somewhere, but lie in their place and are always at hand. The basis of order on the desktop is the organizer. But only the one that the child would like and how he would like to use.

Better to do it yourself. Why? First and most main reason- it's fun. The child will love to come up with a design and make his own organizer. Yes, and you too. The second reason is the special value. A student made with his own hands will certainly use an organizer more willingly than a purchased one. And the third, but optional reason is savings.

Here are some ideas:

From cardboard

The easiest way to make an organizer is with cardboard boxes. And the material can always be found - in any kitchen there is plenty of it. And there is little trouble - just cut the opening and glue the structure beautiful paper. At worst, you can paint with markers.

And in the bushings for toilet paper You can store pens.

If you have a little artist growing up, and there is nowhere to put a hundred of his pencils, make an organizer from a shoe box and toilet paper rolls.

You can make receptacles for small items in a table drawer out of cardboard.

You can cut the box into cardboard sheets, glue or sew them, and then cut out the boxes. And the organizer is ready!

Wall organizers also look stylish. Make triangles out of origami cardboard and hang them over the table. About that, we already wrote.

From fabric

If you know the basics of sewing, you can create beautiful organizer from scraps of fabric.

If you don't know, then make it from old jeans. Cut out the pockets and sew or glue them to the fabric.

Framed fabric organizers look very nice.

From cans

A painted jar, whether glass or tin, is itself stylish decoration rooms.

from wood

To make such an organizer you will need a wooden block or blocks. Drill holes in them. Now you can put pencils and pens there.

From book

We are that old Soviet books like "The Party is calling!" Great for more than just lighting a picnic fire. They can decorate the house. You can also make a box for various paper clips, rubber bands and other small items from them. You just need to carefully cut a hole in them.

From pencils

There will certainly not be such an original organizer about anyone. And doing it is very simple. You need a set of pencils and a jar. Will fit and plastic bottle with cut neck. In general, the container must be glued with pencils.

In one of our articles, we talked about how to make a stand for storing newspapers and magazines. And if you still prefer the good old printed press to electronic publications, then this article will also interest you. Today we will show you how to make wall organizer for magazines.

Materials and tools for making an organizer:

textile
wooden pole
rope
scissors
sewing machine and thread
a hook or other decorative device on which to hang the organizer
reliable glue (optional)

How to make a DIY magazine organizer

Prepare three pieces of fabric measuring 50 × 30 cm. Fold each of the pieces along long side to make 50 x 15 cm strips. Sew long edges to make a tube case.

Turn out the resulting sleeve, smooth it with an iron. Repeat the same procedures with the other two blanks.

Fold one of the sleeves in half lengthwise.

Unfold the second sleeve flat surface. Place a double-folded workpiece on top so that the fold is located at a distance of 10 cm from the bottom edge of the first sleeve.

Secure with pins, then sew all six layers of fabric along the top edges of the double-folded sleeve.

Turn the resulting workpiece over and fold the remaining unfolded sleeve in half. No seams should be visible.

Take the last unsewn sleeve and lay it over the two sewn ones. The bottom edges of the blanks must match. Pin the top edge of the bottom layer to the top panel with pins. Sew along the edge.

This time, folding the last sleeve in half, make sure that the front edge is 5-7 cm higher than the back.

Place a wooden pole on top desired width. Wrap the resulting allowance around the pole. Fix the fabric with pins and sew, after removing the pole.

Note: the pole should be about 10 cm wider than the panels.

Insert the pole into the resulting pocket. Tie a rope to its ends.

On the wall, fix the hook on which your wall organizer will hang.

Instead of a hook, we used two clay mugs, which were previously connected with glue.

The wall organizer for magazines is ready.

Original article in English.

If you have a lot of magazines and papers in your home or office that have nowhere to store, use special organizers or trays. These organizers can be bought at a stationery store or made independently. In this article, we will show you how to make a do-it-yourself magazine storage organizer. Such organizers will turn out to be inexpensive, since 9 pieces can be made from a sheet of plywood measuring 120 × 120 cm.

Materials and tools:

sheet of 6 mm plywood 120×120 cm
board 25×100 mm, length 2.5 m
PVA glue
masking tape
putty for wood
paint or varnish

Scheme for sawing plywood

Cut the plywood sheet according to the pattern.

Gather the organizer parts together. Make the bottom from boards 25 × 100 mm. front and back wall cut from strips of plywood 100 mm wide.

Glue the parts with PVA glue, fix them masking tape and leave to dry overnight.

If there are gaps between the parts, fill them with putty. Glue buildup can be removed with sandpaper.

Cover the organizers with paint or varnish, combine the types and colors of coatings to your liking.

Note: such organizers can be decorated using many techniques, such as painting, appliqué or decoupage.

Original article in English.

The desktop of both the student and the office employee should always be kept in order. So that nothing is lost, stationery items are placed in one place. With the aim of rational use table surface you need an organizer for stationery. It is not difficult to make such a design with your own hands. You will definitely get a designer thing.

Of course, buying a plastic, metal or wooden organizer is not a problem at all. But if you want to create something unique, then you need to turn on your imagination and make the organizer yourself. In addition, you can install right amount compartments and cells and arrange everything as it will be convenient for you.

Many needlewomen are interested in how to make an organizer for the office with their own hands. The only thing that can be said with certainty is that such a desktop device is easy to make. And here it all depends on the height of your imagination.

The easiest way is to make an organizer out of cardboard boxes and bushings. Any packaging is suitable, for example, from under milk, bulk products, cereals, juice, etc. For decoration, you can use gift wrapping paper or colored paper, pieces of wallpaper, fabric shreds, braid and lace, pebbles and rhinestones, pieces of leather, beads. In general, take everything that comes to your hand.

Multi-level organizer from improvised materials

Today we will make a do-it-yourself organizer for stationery from boxes. To get started, look for empty boxes, milk or juice cartons. You can use cardboard tubes of toilet paper rolls or paper towels as pencil and pen holders.

decorative paper;
cardboard folder;
double-sided adhesive tape;
glue;
scissors;
simple pencil;
ruler;
stationery knife;
empty boxes.

We will prepare all the materials and tools necessary for the work.

We take a cardboard folder. We measure from the edge 5 cm and cut off on both sides.

The folder will serve as the base of our organizer. We need to cover it with decorative paper. We will do this with double-sided adhesive tape.

Now we take the prepared boxes and cut upper part. It is best to make the back cover a little higher and the bottom lower.

By analogy, we cut a few more boxes of various sizes.
Cover the boxes with decorative paper. We also use double-sided adhesive tape.

Let's estimate approximately how many boxes we can fit on the base. Think over the layout of the organizer in advance.

Lubricate the bottom of each box with glue and glue to the base.

After the organizer dries, fill it with office supplies and put it on your desktop.

budget organizer

Have you already seen that you can special efforts and financial costs to make an organizer for the office with your own hands. You can easily find a master class on the global network. And if you can think creatively, come up with your own version. For example, you can make an original glass from tin can. Decorate it at your discretion with any accessories. And so that you are not annoyed by the sound of pencils and pens on the metal bottom, cover it with a viscose cloth.

Necessary tools and materials:

can;
glue;
decorative paper;
scissors;
viscose fabric.

Step by step description of the creative process:

To create an organizer, any tin can from canned foods, such as green peas or dessert corn, is suitable.
Rinse the jar thoroughly and dry it.
The edges of the can must be carefully bent with pliers so as not to get hurt.
Now you can start creating. Tip: Do not remove the paper sticker from the jar, this will make it easier to decorate.
We take decorative paper and measure the tape to the height of the can.

Glue it to the jar, let it dry for 10-15 seconds.
Now grease the second part with glue and glue it.
To make the decorative paper lie flat, smooth it with your fingers and press it.
We pay special attention to the joints, they must be well saturated with glue.

The sound of objects hitting the metal bottom will become annoying over time. You do not need to bring yourself up and take sedative medications, it is better to prevent it right away.
We take a viscose fabric, you can use a kitchen napkin, circle the bottom of the jar and cut it out.

Glue the viscose to the bottom.
Our organizer is ready. Simple, fast and cheap we built unusual stand for office supplies.

Organizer Decor Ideas

The material you are constructing the stationery organizer from will not be visible. But the decor is important element your creation. Pasting the base with decorative or colored paper is the easiest and most affordable way.

If you decide to turn the organizer into a real masterpiece, you can use denim for decoration. Take old jeans and wrap the base of the organizer with fabric. If desired, you can cut out the pockets. Great addition To denim becomes a lace ribbon or braid. And you can take pieces of leather or suede.

An organizer decorated with a material of various textures will look very nice. You can combine paper with fabric, and leather with satin. Rivets, buttons, bows, ribbons, beads, rhinestones - all this will come in handy. The main thing is to turn on the fantasy to the fullest.

Categories

Popular