Do-it-yourself pillow-roller: interesting ideas for making a convenient accessory. Do-it-yourself pillow-roller - schemes to help How to sew a pillow-roller with a zipper

The art of real relaxation, comparable to immersion in blissful nirvana, came to us, overcoming time and space, changing and transforming, from the countries of the East. It was on this mysterious and blessed land that the first fluffy carpets, sofa cushions and soft poufs were created.

Over time, in the art of creating these products, oriental masters have reached real perfection. Why not borrow their experience and create a product for comfort and coziness, using the advice of experienced artisans. One of the most simple and useful products for interior and leisure - original pillow in the form of a roll. Do-it-yourself pillow cushion is a completely feasible project, the implementation of which even the most inexperienced needleworker will need no more than a couple of hours.

Yes, a do-it-yourself pillow cushion is created in a matter of hours. This is not much, even for our busy rhythm of life. All work is carried out in full compliance with technological rules characteristic of this oriental product.

Why do you need a cushion?

Do-it-yourself pillow roller is great opportunity quickly and cheaply become the owner of a stylish accessory and just a useful thing.

Previously, rollers - before the appearance upholstered furniture, were used as armrests attached to hard wooden couches and sofas. These elongated pillows were stuffed with the usual stuffing for those times:
. horsehair;
. dry fern;
. straw.

But feather and down were not at all suitable for stuffing such pillows, since soft stuffing did not allow comfortable, and at the same time elegant, leaning on the roller during small talk. Of course, tailcoats and bustles are a thing of the past, but this does not mean at all that a do-it-yourself pillow cushion is not worthwhile and irrelevant. On the contrary, these original products from the "sofa team" are still in demand, relevant and fit perfectly into most modern interiors.

Do-it-yourself pillow roller, made in the form of a cylinder, is made from a single piece of fabric or from several strips that are in harmony with each other. For stuffing, you can use any suitable filler. They show special imagination when decorating the ends - do-it-yourself pillow cushion, this is a great opportunity to show your creative abilities. So, for example, for the design of the ends are often used:
. folds;
. edging;
. assemblies;
. decorative buttons;
. bows;
. pleating.

What tools and materials will be needed?

Do-it-yourself cushion cushion will require the following materials and tools:
. high-density fabric - it can be tapestry, boston, calico or microvelveteen;
. pillow in the form of a roller, stuffed with down, feathers or synthetic stuffing;
. decorative cord - for edging;
. large buttons trimmed with fabric, as well as tassels and rosettes - for decoration;
. buttons and zipper;
. chalk and ruler;
. centimeter and scissors;
. sewing machine;
. needles, threads and pins with an eyelet.

First of all, the future location of the pillow is measured - this will avoid unforeseen inconsistencies in the size of the product and the bed. Finished pillow cylindrical shape- sewn or purchased - must exceed the volume of the roller by approximately 10%. The manufacture of the cover, on the contrary, is carried out according to precisely calculated dimensions - then the cushion cushion with your own hands will acquire a clear outline and the required elasticity.

Tailoring options

1. Transferring the dimensions to the wrong side, we add two centimeters on all sides - for an allowance. We cut out the necessary fragment. We make sure that the lower and upper sides of the cut are equal to the circumference of the end, and the side edges are equal to the length of the roller.

Chip the fabric on the sides with the face inward, retreat 2 cm from the raw edges, from the ends - 15 cm each. We sew along the long side. We sew in a zipper, sew on buttons or buttons - to fasten the cover.

On the remaining fabric, draw two circles - the ends. We add to the circles for the seams - 2 cm each. Cut out and cut the allowances - so that the circles do not wrinkle. We sew an edging cord around the perimeter. Next, we make an incision of the end edges of the cover. The step and depth of the cuts are 1.5 cm each. Chips the front sides of the ends and the edging, we sew.

After turning the pillowcase, check the quality of the seams. If there are flaws, we fix them. The ends should look perfect. Everything, the cover can be put on - the cushion cushion with your own hands is ready!

2. In accordance with the length of the cylinder and the radius of the ends, we calculate the dimensions of the "tails" that will be tied at the ends of the pillow. Similarly to the first option, we make a pattern - we need a strip of fabric equal to the length of the pillow on the side edges, and on the lower and upper sides - the end circle. On all edges we add to the seams - 3 cm each. Then we cut off and sew the workpiece from the inside - along the long side. Tucking the end sides in half, by one and a half centimeters, we sew. Then we sew the tails, put the roller into the cover, tie the ends - the cushion cushion with our own hands is ready.

3. Having marked and cut out, we sew the cover, similarly to the first option. From both ends we make a fringing, cutting the cord so that there is one joint at the ends. We cut two strips of fabric. The width of the additional blanks should be equal to the radius of the end, the length - the circumference of the end. On each side of the cut should be left at the seams - 1.5 cm.

Having chipped and stitched the short ends, we attach one long side of the workpiece along the edging to the end. Having bent and trimmed the free edge, we thread a cord or braid into the resulting drawstring. Then we repeat all the operations on the second end of the roller.

Having put the pillow in the cover, we tighten the cords, tie them, and then sew them - for extra strength. Cut off the ends of the cords. The tightened hole formed in the middle of the butt is closed with a button, brush or rosette.

Ordinary sofa cushions can be replaced with round cushions made of bright fabric and decorated with decorative braid, buttons or tassels.

Roller pillows have become very popular lately. For their manufacture, foam rubber molds of various sizes are sold in sewing accessories stores. to give extra softness, foam rubber is usually covered with polyester batting.

• In the living room, pillow-rollers in pillowcases made of silk fabric, velor and tapestry will look luxurious. for the bedroom, pillowcases are best made from cotton or satin - these fabrics are more suitable for bed linen in texture.
• Decorate the round sides of the rollers with matching or contrasting decorative details. A pillow cap should consist of three elements: the main part, which is cut out in the form of a rectangular panel sewn with a tube, and two sides with drawstrings for a lace.

Measurements and cut:

In order for the finished pillowcase to fit perfectly on the pillow, carefully take measurements from it.

• Main Detail = bolster length + 1 cm for seam allowances x bolster perimeter + 3 cm for zipper flap + 1 cm for seam allowances. One panel is cut out.
• Side = half bolster diameter + 3 cm for drawstring and seam allowances x bolster diameter + 1 cm for seam allowances. Two pieces are cut out.
• Piping = 3 cm x bead perimeter + 1 cm for seam allowances. Two strips are cut out.

You will need:

• foam roller
• batting and gauze or other fabrics of rare weaving for covering the foam form
• fabric (or several types of fabric) to make the main part of the pillowcase, its sides and piping, suitable
• threads
• 2 buttons on the leg or tassels
• sewing machine with a special foot for sewing in "zippers" "zipper" is 2.5-5 cm shorter than the foam
• cotton cord for edging with a diameter of 1 cm and nylon cord No. 5
• measuring tape and scissors, safety and sewing pins
• iron and ironing board

1. With right sides, pin one half of the zipper along one long edge of the main piece. With the help of special paws, sew half of the fastener. Close the zipper, iron the allowances on the wrong side of the part and iron.
2. Bend the opposite long edge of the main part by 3 cm and smooth it down. Place the folded edge of the panel over the closed zipper, aligning the fold with the seam so that the fastener is not visible. Baste the fabric and the mulle. Sew on the clasp with front side.

3. To make the edging, fold the strip of fabric in half lengthwise. side up. Inside the fold, place a cotton cord and with the help of special. presser foot on the machine, sew the seam as close to the cord as possible.
4. Fold the piece of the side of the pillowcase widthwise right side inward. Sew the short sides of the part to make a ring, 1 cm before the end of the stitch, leave 1 cm unsewn. Do the same with the second side.

5. To make a drawstring on the sides of the pillowcase, fold the edge of the fabric with a slot two times 1 cm to the wrong side and iron it. Sew along the hem.
6. Pin the piping to the front side of the main part of the product. On the edge, also pin the side of the product with the front side. Sew all layers together. Do the same on the other side of the pillowcase.

7 . Pierce safety pin a piece of nylon lace, close the pin and insert it into the slot of the drawstring. Pass the string through the drawstring.
8 . Pull the ends of the lace together by adding to the pillowcase on the sides. Pull the ends of the lace inside the pillowcase. Cut the string twice the length of the cushion. Put a button on it; fold the string in half.

9. Pass both ends of the lace through the hole on the side. Bring one end out of the hole on the opposite side of the pillowcase, pass it through the second button, slide it back inside the pillowcase and tie both ends in a knot.
10. Wrap the foam form of the batting. Reconciliation wrap the form with gauze. Insert the mold into the pillowcase and fasten with a zipper.

Needleworker's corner:
Instead of a dense foam roll, make a soft batting head roll by rolling it around until you get the desired diameter. Then wrap it tightly with gauze or other loosely woven fabric to hold its shape, baste it, and insert it into a pillowcase.
Try to do!

You can also make a pillowcase for the pillow of the roller from one large panel of fabric: just wrap the foam rubber shape around it, pull the fabric on the sides with ribbons so that the roller looks like a huge candy. Cut a length of fabric from the fabric equal to the length foam shape plus 80 cm, and a width equal to the circumference of the roller plus a seam allowance. Sew long sides between themselves with the front sides together, stepping back from the edge of 5 mm. Bend the raw edges of the resulting fabric pipe twice 1 cm, iron and decorate the border. Place the foam mold inside the fabric tube so that the overhangs along its edges are the same. Gather the overhangs of the fabric and tie them with ribbons or ties made from the same material.

Those who are uncomfortable sleeping on a regular pillow can pick up a roller for themselves, especially since they are also different and with various fillers. Many people get up after sleep with pain in their back, neck, spine, so these people just need to change their old uncomfortable pillows for orthopedic supplies.

The most useful are rollers with natural fillers. So natural material is, she has a lot useful properties that have been tested over the years.

Is it comfortable to rest on a roller?

The most important advantage in using such a sleep roller is its elasticity, due to which the spine is supported. It is especially good to sleep on a roller with buckwheat filler for people who often experience pain when they sleep on their ordinary pillows. This will be the most correct way to complete recovery and restoration of the body. Such a roller is also great for people with excessive sweating, as it has good air circulation. Buckwheat husk makes a kind of acupressure, thanks to which you can relax, and if you pick up another natural cotton pillowcase, you can feel the aroma of buckwheat. It will also help improve nervous system and physical condition of the whole body. Waking up in the morning, it's nice to feel good mood from the fact that you are completely rested and you can start the working day.

Buckwheat roller is also orthopedic roller which relaxes the neck and spine. And this has a very great importance especially for people who have a sedentary job, for office workers, and for those who work a lot at the computer or while driving a vehicle. The roller will help prevent osteochondrosis - a disease of a sedentary lifestyle. When you come home after work, you definitely need to relax all your muscles, so a pillow-roller will be a great helper. By the way, you can make it yourself, and it's not difficult at all.

How to make a roll under the neck with your own hands?

You will need:

1. old jacket or sweater
2. piece of natural fabric
3. yarn
4. needle
5. thread
6. Crochet hook

From this list it can be seen that for such a pillow you do not need anything special, everything is from improvised means. For example, for filling, you can take some old sweater, or a few unwanted t-shirts. You just need to fold the sleeves and collar well, and then roll it up in the form of a roller. It will be not only comfortable, but also warm. To prevent the sweater from unwinding, it must be wrapped in a piece of natural fabric, and folded around the edges with an envelope and sewn with a thread and a needle. This is convenient when you want to wash the pillow, you just need to rip it open and wash all the elements.

Next, you need to make a pillowcase for the roller. It should be beautiful and practical. As for the pillowcase, it can be made from anything, you can knit it, if you know how to do it, you can sew it from various pieces - as your imagination decides. There is a very good and simple option - this pillowcase is crocheted with a simple column. When it is ready, wrap it around the roller, and around the edges you can tie it with a stretched ribbon or cord, thanks to which the roller will turn into a wonderful candy.

Before you make a roller under the neck with your own hands, you should decide on the size. Twisting a sweater, try on for yourself which pillow will be more comfortable.

Such a pillow will serve perfectly while sitting on a sofa or chair, when you put it under your back. And in the case of recumbent rest, it should be put under the neck. If there are any injuries to the limbs, then the roller will also serve well in this embodiment.

Dear readers, do you have a neck cushion? How does your neck feel after resting on it? In addition, I advise you to read my articles on the “handmade” topic. For example, perhaps someone is going to decorate it beautifully.

How to sew a pillow with your own hands? Every needlewoman thought about this. A pillow is needed not only for sleeping, with it you can make the design of the apartment complete and original.

After seeing the photo homemade pillows on the Internet, you might think that tailoring requires experience and talent. But having understood the very process of creating a pillow, it turns out that it is not at all difficult.

Let's see how to make a pillow with your own hands?

The most important thing to know before you get started

Before you start sewing a decorative pillow with your own hands, you need to decide exactly how it will look. But more important than this is to choose the fabric and filler.

If you want to make a multifunctional pillow, it is important to choose a fabric that can be easily cleaned. The filler should not fall into dense lumps for as long as possible, losing its elasticity.

Materials. Textile

To make durable, practical and nice pillow you need to choose the right fabric.

Firstly, it should not be strongly electrified and attract any dust to itself, it can be easily cleaned with a vacuum cleaner.

Secondly, the material must prevent dust from entering the packing. Suitable fabrics:

• Atlas
• Crepe satin
• Furniture upholstery fabrics
• bike
• linen fabrics

You can use other fabrics, except for propylene matting. It is slippery, rough and tough, so for soft pillow won't fit.

Stuffing

The pillow can be stuffed with many materials. It can be cotton wool, bird fluff or feathers, foam rubber, synthetic winterizer, holofiber and many others.

Let's deal with each filler:

Cotton wool and synthetic winterizer fall into lumps at great speed. At the same time, it is almost impossible to evenly fill the product with cotton wool.

Feathers and down are not suitable not only because of the difficult accessibility, but also because of insufficient elasticity. No one will beat up a decorative pillow like a sleeping pillow, so as not to spoil the beautiful finish.

Hollofiber is readily available, available in two forms: sheets and fluffy granules. Sheet is more expensive, it can be replaced with cheaper foam rubber. Hollofiber is well suited for a pillow. It serves for about 10 years without rolling.

Another filler option is round silicone granules. They are best for baby pillows because they are hypoallergenic and can be easily poured out, rinsed, dried and put back in through a small hole.

Decoration. Colors

The easiest way to decorate the interior is to do it with pillows. different color. Of course, they must fit color scheme to interior items: furniture, curtains or even walls.

This is sometimes a difficult task - to achieve a combination - but very popular. From pillows different colors you can create an ensemble that will emphasize all the advantages of the interior.

The most interesting thing is that the idea with colorful pillows is not only easy to implement, but also financially affordable.

Note!

Do not stop the choice only on plain fabrics, materials with patterns and ornaments will look advantageous.

Seal

Recently, printing on fabrics has become more and more popular. Why not print on the pillow? This is affordable option decoration of your product: printing prices are not very high, the pattern is stable and clear.

With the help of numerous computer programs you can make a design in advance and even see how the ensemble will look in the interior.

Shape and Fragment

Pillows can be made in absolutely any shape. There are no restrictions in this, the main thing is to show imagination. You can use the technique of modular sewing. To do this, several simple parts are made, which are subsequently sewn in place into a complex product.

The disadvantage of this method is that it is quite difficult to clean. You must either completely disassemble the product, or use a furniture vacuum cleaner.

Note!

Patchwork or patchwork is also used. Most often, they take a key fragment and place it in the center. The fragments combined with it are located along the periphery. Simple but very effective!

key element

The compact key element adds a touch of sophistication to the throw pillow. Such an element can be a button, tassels, bows and much more. There are also no restrictions.

You can ennoble a product from a modest fabric with the help of a key element. With his help ready product will look richer and more expensive, so you can use technical or furniture upholstery fabrics that do not differ in bright colors.

Knitting, embroidery, lace

Knitted sofa cushions are more difficult to make than just sewn from fabric. You must be able to knit or crochet - this is a laborious craft that requires care.

However, so is embroidery. On the pillow, you can embroider any plot with satin stitch, cross or ribbons. Here, too, everything depends on your skill, imagination and perseverance.

You can also decorate the product with lace. Of course, it is easier to buy ready-made lace in a store, but it will be much more expressive if you make the lace yourself.

Note!

Just imagine the faces of guests who saw pillows completely made by you.

To make a pillow, you can use, for example, an old sweater. The effect will be the same as from a self-bonded cover. If desired, it can be decorated with various beads, buttons, and so on.

Cushion embroidery

As mentioned earlier, you can decorate the pillow with any embroidered plots, but you can not do them in any technique that you own.

Therefore, do not embroider with beads on the pillow. Why? It's just unhygienic. It will be problematic to wash out all the dirt from under the beads, but what got into the beads itself will remain there forever. Yes, and think about whether it will be comfortable to lie on such a pillow?

Cross stitch is best because it is the most durable. You can wash such a product without worrying that the threads will come out. You can use the smooth surface, but when washing the threads weaken, and the pattern loses its attractiveness.

From old clothes

So, you can make a pillow out of old sweaters, but what else can I use? Yes, whatever! Old T-shirts, sweaters, T-shirts - everything that is lying around in your closet and waiting in line for a landfill.

You can even use jeans. The product will turn out not so soft, but it will look very original.

figurines

These pillows are perfect for a child's room. They can simply stand on a bed or even a shelf, pleasing to the eye and finishing the nursery design. They can serve as toys or serve their intended purpose.

The figurine pillow can be of absolutely any shape, the main thing is that you and your kids like it.

Funny letters

With the help of such pillows, the child will quickly learn the letters. Often letters or numbers are sewn for the holidays. Letters can also serve as toys too.

Sleeping on them is sometimes not very comfortable, but they look great in the interior.

For the manufacture of large letters, it is better to use foam rubber, and fill only the edges with holofiber. In this way, you can stuff any large pillows.

Borders

Every mother of a baby knows the problem: how to protect the child from bumps while sleeping in a crib? The child has already been saved from falling from the crib, but what to do with these hard sides that the child constantly hits in his sleep?

For these purposes, you can also sew a pillow! Foam rubber is best for boards. It is dense and will not allow the child to feel the fences upon impact.

Any foam rubber can be sheathed soft cloth to which the child will not be allergic. In order for the pillow to hold on, it is necessary to sew on fabric ties with which the pillow will stay in the crib.

Any pillow, regardless of its shape, size and design, will fit perfectly into any interior.

Easy to manufacture, not requiring special talent and skills, these products will turn a boring and dull apartment into an original and cozy place to relax.

DIY pillow photo

Content

The home interior consists of many details that create cozy warmth in home. One of these interior items is a decorative cushion in the form of a roller. Such pillows, along with pouffes and carpets, came to us from Eastern culture. There they played the role of armrests on couches, wooden sofas. The fillers for them were horse hair, straw or dry fern leaves.

But fluff and feathers were not used to fill such rollers, because. armrests had to be elastic enough to retain their shape and not sag sweat with the weight of the body.

In our time, sofa armrests have become a fashion accessory - a cushion cushion, which you can lie down or lean on while watching TV or reading a book.

If you like handmade, then you can easily sew such a pillow-roller with your own hands, using the remains of various scraps of dense fabric. The size of the pillow can be absolutely any, they are determined based on your preferences or the size of the sofa. The ends of the pillow can be decorated with textile flowers, decorative tassels, pleating, bows, ribbons, ruffles, appliqué or decorative embroidery.

On covers for such pillows, convenient fasteners with Velcro, buttons or zippers are often made. Then they are very convenient to remove and wash as they get dirty. As a filler, synthetic winterizer, cotton wool, holofiber, foam rubber and others are used. modern materials. You can also use pre-made pillows. They can be easily purchased at textile stores, where there are inserts. different sizes. It remains only to sew a cover right size, put the insert inside and the pillow is ready.

Even a novice needlewoman can sew such a stylish piece of furniture from any remnants of fabric. Today we will look at how to sew a pillow-roller with your own hands using a simple pattern.

Pillow with cord trim

To sew such a simple, but very comfortable cushion cushion, we need to stock up on a minimum of materials and a couple of hours of free time.

For work you will need:

1. Thick fabric (velveteen, jacquard);
2. Lightning;
3. Cord;
4. pins;
5. Threads to match the fabric;
6. Scissors;
7. Tailor's meter;
8. Ruler-gon;
9. Simple pencil;
10. Sewing machine.

Sewing instructions

Let's start by cutting out the main part of the cover. Using a ruler-triangle, mark out, cut out an even rectangle from the fabric. In which the longitudinal sides will be shorter than the sides that are sewn to the end round parts. We make the dimensions of the rectangle according to our measurements.

Now we cut the edging for the round side parts of the pillow. The width of both patterns should be 4-6 cm wider than the main fabric. The width of the facings should be 8 cm.

We mark the patterns of round ends using any round object as a stencil (plate, pot lid, ladle, etc.). Cut out two identical parts.

Now we start sewing the roller and sewing on the zipper. We turn a large pattern face inward, we cut off the side seam with pins.

We sew the side seam 1.5-2 cm from the edge.

In the “Steam” mode, smooth the resulting seam by turning the edges in different sides.

Now we apply a zipper, we outline one side with pins, as shown in the photo.

We sew the stitched seam on sewing machine. Then we pin the other side of the zipper with pins, attach the second edge of the zipper to the base. To protect the edges of the seams from fraying, we overcast them with a zigzag seam. We fix the edge of the zipper with a transverse short seam, cut off the unnecessary part of the snake.

We rip the side seam with a special tool. The result is a neatly sewn hidden zipper.

Now let's move on to the decorative trim. We iron inward the short edge of the pattern 1-1.5 cm wide. Then, folding the workpiece in half, we iron it, as shown in the photo.

We lay the cord along the ironed line, fold the part in half longitudinally. We pin it with pins so that the fabric tightly wraps around the cord.

We lay the seam along the basting, as close as possible to the cord, securely fixing it inside the edging.

Cut off the excess fabric. We make small frequent cuts along the edge of the free edge so that the part can easily accept round shape. We do two things.

Now we take one part of the round end, attach one edge of the edging to the edge of the circle. Now, with pins, we carefully tack the entire edging in a circle, cutting off the excess.

After that, according to the basting, we attach the edging with a cord to the side. We make the second part in the same way.

We turn the main workpiece inside out. We apply the end part to the base face to face, we outline the seam of the connection with pins.

We lay a machine seam along the edge at a distance of 1.5 cm.

Open the zipper and turn the pillow right side out. Here our pillow-roller is ready, it remains to put the filler and close the zipper.

Colored pillow with buttons

This pillow will add to the interior bright colors and some romance. For its tailoring, the remnants of any colored fabric are suitable. In total, you will need 4 variegated colors.

For work you will need:

1. 4 pieces of bright dense fabric;
2. Cylindrical insert (length 35 cm, diameter 15 cm);
3. 3 decorative buttons in the form of hearts;
4. sewing tools (scissors, pins, threads, needles, machine).

Sewing instructions

We choose 3 colors of fabrics that will go to the main part, and leave the fourth segment for cutting round ends. We sew together three rectangular patches along the length of the finished roller. From the fourth piece we cut out two circles with a diameter of 15 cm plus 2 cm for allowances.

We iron the seams in different directions, overcast the edges with a zigzag so that they do not fray. The workpiece should be 35 cm in length plus 3 cm for the seams and a width equal to the circumference plus 2.5 cm for the seams. We tuck both edges of the main canvas, sew to a width of 2 cm.

On one side we will make loops, on the other we will sew heart buttons.

Along one edge on the front side, we sew three buttons at the same distance from each other. For a gap, we retreat from the edge 4-5 cm.

From the opposite edge opposite each button, we sew 3 loops, make cuts inside them.

After buttoning the buttons, turn the cylindrical blank inside out, pin round details with pins end parts by placing them face down.

Now we attach the details to each other, cut off all unnecessary. All seams are carefully ironed.

We turn the product inside out, place the cylindrical insert inside, fasten the seam. So a nice cushion cushion is ready, sewn with your own hands according to a simple pattern.

A hand-sewn pillow-roller can be adapted for the decor of a bedroom, living room or country gazebo. And if you sew a cover made of waterproof fabric, then you can place it on a sun lounger near the pool or take it with you to the beach.

For tailoring, it is better to use a dense fabric that will be sufficiently resistant to abrasion, but not rough to the touch. The color scheme can match or contrast with the overall color of the textiles in the room.

Post Views: 362