How to make a children's swing from a balloon. Tire swings are fun and easy. We make a swing from old tires with our own hands. Making a simple tire swing

An inexpensive structure that is attractive to children of all ages is a do-it-yourself tire swing. They will not leave indifferent the adult youth, and the children will definitely be delighted. For children, it is no longer important appearance, and the ability to take off, swing.

In addition to pleasure, swings bring considerable benefits - they develop and strengthen the vestibular apparatus. If a child gets sick while riding in a vehicle, a rocking chair from a tire will serve as a simulator for him. Swinging on it only once a day, the child will overcome the fear of movement and heights, as the vestibular apparatus strengthens, weakness, nausea, and dizziness will go away.

Usually they are installed on the playground in the courtyard of a residential building, in the country, in the garden, on the shore of a reservoir. They won't take up much space. Hanging swings are designed so that they can be removed and removed or moved to another appropriate place. Rocking chairs and balancers are also in most cases mobile.

In addition, this building is quite budgetary, every dad can make a swing out of a tire - there would be a desire. Sounds convincing? In that case, get to work! First of all, you need to determine what kind of swing you need.

A little imagination, favorite colors and colors - and old tire no longer garbage, but an important part of the decor or an artistic image ....

Types of tire swings

- ground in the form of a rocking chair-balancer;

Ground, in the form of a rocking-balancer

- suspended with tires located vertically or horizontally;

Suspended swing with tires

- rocking cradles with seats made of tires (they are made in the form of figures of animals, birds, or simply arranged in the form of a cradle, chair).

Rocking chairs with seats made of tires

Rocking-balancers

The balancer is a “classic of the genre”, it is on every playground. Two people sit at opposite ends of the board, alternately rising and falling. To raise his side of the swing, the person sitting on it pushes off the ground with his feet, and the second one lands.

To make such a swing from tires with your own hands, you will need:

durable wooden smoothly planed boards;
strong stable support;
metal crossbar;
handles-holders;
nails or screws;
bolts;
tools as needed;
old tires.

As a basis, you can use two wheels from a car with tires, connected along the axis by an iron crossbar. A board is attached to the center of the crossbar. Both children and adults will love to swing on such a swing. Its undoubted advantage is mobility. It will not be difficult to roll it to the right place in the yard or garden plot.

Another option: take a large tire from a tractor or a large car. It is sawn across and the semicircle is used as a support. Two boards are attached to it: one, equal in length to the diameter of the tire, should fit snugly into it upper part. It is inserted into place and attached to the tire with nails or screws. The second, longer and wider, is placed on top and fastened to the first. For the safety of children and convenience, handles are attached to the board. You can use door metal handles - staples. Holes are drilled at the bottom of the tire to drain water.

The swing of the two halves of the tire is more stable and safer. They fasten the semicircles together with bolts, fit the seat - a long board. External design- coloring, drawings - a matter of imagination and creativity of parents.

A small balancer according to the same scheme can be made as room option. This swing will be obtained from a tire from passenger car. The upper board is made no longer than the diameter of the tire and swing on it to the left - to the right, sideways. Armrests or handles are attached from the edges of the board so that the baby has something to hold on to.

You can sit on the balancer astride and swing back and forth. If dad's creative imagination spreads a little further, instead of handles, you can attach the head and tail of a horse or other animal carved from wood. In children younger age such rocking chairs cause delight.

Hanging swing

The main difficulty in their construction is finding or installing a suitable crossbar for hanging them. A horizontally growing thick tree branch, a horizontal bar not used for its intended purpose, or a specially built structure will do. As a seat - a tire. For this purpose you will need:

tire without damage;
chain or strong rope;
fastenings (cargo bolts, hooks);
tools as needed.

construction

To make a simple tire swing, a minimum of time and effort is required. The tire is tied with a rope or chain and suspended vertically. It is good to drill a few holes in a circle so that it flows out rainwater. They swing on such a swing, passing their legs through the wheel or sitting on top and holding on to the chain with their hands. Often they hang such a structure near a reservoir, and the children, swinging while standing on it or holding their hands on the lower edge, jump into the water. Although such a "bungee" is not very convenient, the boys are delighted with it, because each of them can be a real Tarzan for a minute.

For the yard or suburban area make a swing with a horizontal seat. A metal chain or a strong rope is fixed on the tire. To do this, you need to make from the cargo mounting bolts. Under bolts with a ring, instead of a head, 3 or 4 holes are drilled in the tire at an equal distance from each other. The bolts are fixed and inserted into their rings with S-shaped hooks, which are threaded into the lower links of the chain and tightly clamped with pliers. Two people can swing on this swing. For convenience, you can attach a board to the seat.

Another option for a tire swing is a rocking cradle. Via cutting tool(a shoe knife, for example), the tread is cut to a metal cord ring, leaving part of the rubber under the seat. A chain or rope is attached to the resulting circles from above and the cradle is hung on the crossbar. In such a rocking chair, even babies can be rocked.

If dad has time and knows how to use a grinder, you can cut out various figures from rubber. Templates and photos are easy to find on the Internet. The carved figures are bent and fastened with hairpins to obtain the desired figures of animals or birds. The imagination of parents is boundless, children - joy and benefit.

Security

At the beginning of the construction of a swing, you should think about how to make such a swing safe. Tires are thoroughly rinsed detergent. When installing, observe elementary safety rules. When attaching the swing to S-shaped hooks, they (hooks) are clamped well and monitored so that they cannot subsequently be caught by clothing.

In the "fall zone", which extends 180 cm in all directions from the hanging swing, there should be no fences, stones and other similar objects so that the child is not injured if he suddenly falls. In the manufacture of figured rocking chairs, you need to make sure that there are no holes where the child's head could get stuck (holes from 9 to 23 cm are considered such). Paints should be chosen safe for children.

In terms of safety, tire swings are more harmless than metal or even wooden ones. If dropped, the swinging part may hit the child on the head. Rubber in this case safer than a tree and metal. Children's clothing or laces will not catch on the tire. There are no sharp burrs or chips on them.

Although they still remain leaders in popularity. And if the wood is properly processed, then they are also quite safe for children.

Do not rush to throw away unnecessary tires, they will be useful for refining adjoining territory. Decorate the yard and please all its inhabitants can be the most different elements, for example a swing. Having made a swing from tires quickly and simply with your own hands, you organize entertainment not only for children, but also for adults.

Particular attention should be paid to the choice of material: winter tires from foreign cars lend themselves better to external influence- cutting and bending. Preparing the tires for use includes clearing dirt and ensuring that water is drained (several holes need to be made in the bottom of the seat). Tire size is also important: you should not take the smallest ones, but at the same time not heavy ones. Distinguish between ground and hanging swing from rubber.

We make a swing from a tire with our own hands: a balancer

Portable swings are suitable for installation both in the yard and at home. You will need the following materials: wooden plank; half tire; wide bar, paint for rubber, nails.

Paint the tire (so your product will last longer) - this will be the basis of the swing.
Sand and paint the board and block.
Dry the paint on all elements.
Cut off a part of the bar equal to the diameter of the tire.
Insert the bar into the base and secure it with nails.
Nail the board to the bar - middle to middle.

Rocking chair for two is ready. It can be supplemented with drawings and pens.

The rocking chair can also be made single. Materials: half tire; a board and a bar, the lengths of which are equal to the diameter of the tire; a bar with a diameter of 6 centimeters and a length of 35 - 50 centimeters; round bar or a pipe with a diameter of 2 centimeters and a length of 25 - 30 centimeters. Stepping back, nail a bar to it from the short edge of the board. Fasten the tire, bar and board according to the algorithm described above. Fasten the crossbar to the bar - the child will hold on to it. For convenience, wrap the handle with foam rubber (the same handles can be made for a double rocking chair). Via various materials you can designate the seat and even the pedals.

Hanging swing.

For a simple swing, we need a tire and a rope or chain with a carabiner. We pass a chain (rope) through the tire. We throw one end of the suspension over a tree branch or the crossbar of a high horizontal bar and fasten it with a carabiner (or tie a knot).

Materials: a tire, chains or a thin rope, two carabiners, a bolt with a hook or loop on the hat. A tree serves as a stand for such a swing.

We put the tire vertically. We cut several drainage holes on one side of the tire. On the opposite - screw the bolt. On the bolt, to the loop, we tie one end of the rope. The other end is fixed on a tree. To fasten the chain, we use not knots, but carabiners: we fasten the chain with a bolt hook with a carabiner; wrapping the chain around the branch, we also fasten the loop with a carabiner.

If not nearby suitable trees, then the rack can be made of pipes or logs (with a diameter of at least 10 centimeters). We will need 4 pipes of 3 meters and one pipe 2 meters long. We make rack supports: we fasten two pipes at an acute angle using welding (we fasten the logs with large nails, driving them in not completely to bend them). We attach the remaining workpiece to the corners of the supports: weld or nail. We dig the lower ends of the support into the ground, for reliability they can be cemented. The rack can be reinforced with additional slats, as shown in the photo.

Seat types.

Lay the tire horizontally. We make several holes for draining water. Flip the seat over. At the same distance from each other, we screw in four bolts with loops. We fasten chains or ropes to the loops.

For a seat with a back, the tire will have to be cut. Cut off one side of the tire. Cut off the second side surface to the middle. Turn the uncut part inside out. We attach bolts to the sides of the bend.

For a more comfortable seat, you need two tires. Cut off the sides of both tires. We will use two wide rings. We insert one ring into another, crosswise. We bend the vertical ring, forming a seat with a back. We fasten the joints with bolts. We make fasteners for the chain, as described above.

If you have a wide tire, for example, from a tractor, you can make a seat - a hammock. Here are a few options.

Cut the tire in half; clean and paint it; on the sides we attach bolts with loops; hang the swing on a rope.

cut off side surfaces. We cut an opening in the large ring, so that a bed remains on two thin rings. We tie ropes on the rings and hang them.

We put the tire vertically and cut off half of the upper part. Cut out the pattern on the free parts of the sides. We hang a rubber hammock, as described above.

Video on the topic of the article

If you still have questions about making a tire swing, then the following video tutorials will be useful to you.

Almost any garage has old used tires. It’s a pity to throw them away, and the environment suffers from the decomposition of this type of garbage, and hands can’t reach recycling. So the tires are gathering dust in the corner of the garage, taking up space. Meanwhile, they can find very useful application. For example, make a swing and please the children in the yard.

Advantages

Compared to wood and plastic competitors tire swings have a lot of advantages.

This is a strong and stable attraction that is harder to break.
They are spacious enough for two adults or three children.
From tires, you can make several options for the shape of the seat. A creative person with an original imagination can bring the most extraordinary ideas to life.
The rubber material easily tolerates precipitation, ultraviolet radiation and sudden changes in temperature, so these are more durable designs.
An important advantage is the cost-effectiveness of the product. If there are unnecessary tires, the creator will only have to spend money on the frame and mounts.
This is the least traumatic version of the swing. Rubber will soften the blow in case of a fall of a vacationer.
Even a person who is not particularly famous for his “golden” hands will cope with the manufacture of a swing from tires.

disadvantages

Despite the many advantages of a tire swing compared to its counterparts from other materials, this product also has one drawback that must be taken into account when assembling the attraction. Tires have a heavy mass, and therefore, for the safety of vacationers, it is necessary to use a reinforced frame and reliable fasteners in the manufacture of the swing.

Material selection and preparation

Choosing and preparing material for the manufacture of swings, use the advice of experts.

As for tires, it is better to give preference to imported options. The fact is that domestic models are too hard, and this will create certain difficulties in the process. They are more difficult to cut and bend.
It is recommended to choose winter tires, it is more plastic than summer version, and therefore will allow you to make a swing in an unusual shape.
Suitable for swings large diameter tires, but at the same time it is better to refuse the use of wheels for heavy special equipment, otherwise the design will not withstand the weight of the tires.
When choosing tires, special attention should be paid to the strength and durability of the material, because the safety of vacationers directly depends on this. You need to make sure that the coating is not damaged.
Before making a tire, it is necessary to thoroughly rinse the outer and inside. It is better to use a special WD40 liquid for this, which removes impurities from the pores, but in general it will do. common remedy for dish washing.

To prevent rainwater from accumulating inside future swings, drainage holes should be made in the bottom of the tire.
When choosing a place for a swing, it is recommended to give preference to adults, but not old ones. tall trees, on the trunk of which there is no damage. It is better that the branch that will be used as a base is at a level of 2.5-3 meters above the ground, below this branch on the trunk there should be no other branches and other elements that can interfere with swinging.
The minimum thickness of the base is 25 cm. It is better to find a branch, at the end of which, a meter from the tree, there is a horizontal section, bounded on opposite sides by other branches - if you hook the rope in this zone, it will not slip to the sides.
If it is planned to install a hanging swing on a rope, then it is better to choose special climbing varieties. And swings on chains are also popular. The chain increases the durability of the structure, but can damage the tree.

Manufacturing

Making a children's swing from tires with your own hands is a simple process that will require quality materials and perseverance. To help the novice master, the work process is described step by step depending on the design.

vertical

Swing designs can be both vertical and horizontal. Let's start with the first option.

Screw eyebolts on one side of the selected tire.
Tie a rope or chain to the desired branch.
Connect the ends of the rope with screwed screws. If a chain is used, the ends are fastened with carabiners.
Fix the tire at the desired level, which is determined by the growth of the child. Usually, approximately 40 cm is left between the tire and the ground surface - this will allow little child independently settle on a swing and jump off easily.
Drainage holes must be drilled at the bottom of the tire. Thus, rainwater will not be trapped inside the device.
When the swing is ready, it is recommended to test it for strength on your own, and only after making sure that the structure is safe, offer children to swing.
If necessary, then you need to level the ground under the swing, remove stones and other objects that may interfere with the operation of the swing and the safety of vacationers.

Horizontal

This design is also not very complicated.

Install the tie-down fasteners on the flat side of the tire using the eyebolts. If you plan to mount four supports, then screw in two bolts on both sides evenly. If there is a desire to make three supports, then it is necessary to arrange the fasteners along a conditional equilateral triangle with angles of 120 degrees. The distance must be calculated very carefully to avoid skewing future swings.
Attach a rope or chain to a branch.
Fasten the ends with bolts, hanging the seat parallel to the ground.

Cradle

This model is suitable for younger children. For its manufacture it is necessary:

cut off the top edge of the tire with a knife without touching the rim;
by means of bolts, attach the brackets for installing a rope or chain;
tie the ends of the rope maritime knots on staples, remove useless ends.

Armchair

The swing can take various forms such as armchairs. This model will appeal to both children and adults.

Cut off one rim from the tire. Do not throw away.
According to the diameter of the other rim, make a cut on half the circle and turn the product to the inside.
Close the cut part behind the rim, which should be the back.
Secure the kink section with bolts.
Insert the eyebolts into the “armrests”, to which the ends of the rope are attached.
Hang the device on a branch.

rocking chair

Such a rocking chair made of tires will make your children happy.

Cut the tire into two halves.
By means of screws, install a plank to the cut point, which is slightly wider and longer than the edges of the rubber product.
For safety, you need to attach a handle to the board. One of the options for the handle: make two holes on each side and thread a tight rope. Creative masters can install as a handle steering wheel from the car - so the children will be even more interesting.

Skate for kids

And for the little ones you can make such a swing:

cut the tire into two halves;
between the two ends of one of the parts, strengthen the plank;
attach a handle to the plank on the principle of a bicycle steering wheel.

It is quite easy to make a children's hanging swing from tires and tires. There are many various options implementation of this idea in the country. Today we will consider the most durable version of a hanging swing for children - on chains.

Children's swing for giving

Mention should also be made of the simplest version of a tire swing - on a rope. They are done in minutes. A rope thrown over a crossbar or a tree branch is attached to a well-washed tire.

In the lower side part, we make several holes with a drill to drain rainwater and ventilate to avoid mold.

However, this option is not entirely acceptable, because sitting inside a vertically hanging tire long time not convenient, unlike hanging ones. Yes, and such swings themselves often produce rotational movements around their axis when swinging, from which the child may feel dizzy. In addition, the rope rope is subject to chafing over time and such a swing can be traumatic.

However, if you want your children to spend as much time as possible outdoors, then you can consider this option, taking precautions and troubleshooting in a timely manner. After all, it is the simplest, unlike stationary ones.

Suspended swing from tires on chains

This version of the swing is more durable and safer. The tire is located horizontally to the ground and, due to the rigidity of the chain, does not twist so much around the axis. Yes, and sit on it more convenient and comfortable. So:

We take our spent car tire and carefully wash it so that the child’s clothes do not get dirty when riding. With a drill we make holes on the side (lower) side of the tire. These holes will provide both ventilation inner space, and a drain for rainwater. We prepare 3 U-bolts, preferably 100 mm, 3 washers and 3 nuts of appropriate sizes.

We distribute the bolts evenly around the circumference. And drill holes for the bolts. For aesthetic purposes, you can paint the tire with spray enamel from a can, let it dry and insert the bolts into the holes.

From the inside, we put washers on the bolts and tighten the nuts. We fix all three bolts in this way. We divide the metal (steel) chain with a diameter of about 80 mm and a length of 4 meters into 3 equal parts. We insert a U - shaped bolt with a cotter pin into one end of each part. We attach the bolts of the chains to the bolts on the tire and fix the cotter pins with nuts.

We put the other ends of the chains on one U - shaped bolt and select a place for the swing. We put on the ends of the chain, previously thrown over the crossbar, on the same common bolt and also fasten it with a cotter pin. Children's hanging swing made of tires is ready for use.

Precautionary measures:

Make sure that the number of people on the tire is not large (no more than 2) in order to avoid breaking the chains or bending the bolts. If the swing is hung on a wooden beam or a tree branch, its strength should also be taken into account.
Supervise children when they are on the swing to make sure they are using it correctly.

site Ideas for giving

Do not rush to throw out unnecessary tires, they will be useful for ennobling the local area. A variety of elements can decorate the yard and please all its inhabitants, for example, a swing. Having made a swing from tires quickly and simply with your own hands, you organize entertainment not only for children, but also for adults.

Particular attention should be paid to the choice of material: winter tires from foreign cars are better suited to external influences - cutting and bending. Preparing the tires for use includes clearing dirt and ensuring that water is drained (several holes need to be made in the bottom of the seat). Tire size is also important: you should not take the smallest ones, but at the same time not heavy ones. There are ground and suspended rubber swings.

We make a swing from a tire with our own hands: a balancer

Portable swings are suitable for installation both in the yard and at home. You will need the following materials: wooden board; half tire; wide bar, paint for rubber, nails.

Paint the tire (so your product will last longer) - this will be the basis of the swing.
Sand and paint the board and block.
Dry the paint on all elements.
Cut off a part of the bar equal to the diameter of the tire.
Insert the bar into the base and secure it with nails.
Nail the board to the bar - middle to middle.

Rocking chair for two is ready. It can be supplemented with drawings and pens.

The rocking chair can also be made single. Materials: half tire; a board and a bar, the lengths of which are equal to the diameter of the tire; a bar with a diameter of 6 centimeters and a length of 35 - 50 centimeters; a round bar or pipe with a diameter of 2 centimeters and a length of 25 - 30 centimeters. Stepping back, nail a bar to it from the short edge of the board. Fasten the tire, bar and board according to the algorithm described above. Fasten the crossbar to the bar - the child will hold on to it. For convenience, wrap the handle with foam rubber (the same handles can be made for a double rocking chair). With the help of various materials, you can designate the seat and even the pedals.

Hanging swing.

Materials: a tire, chains or a thin rope, two carabiners, a bolt with a hook or loop on the hat. A tree serves as a stand for such a swing.

If there are no suitable trees nearby, then the rack can be made from pipes or logs (at least 10 centimeters in diameter). We will need 4 pipes of 3 meters and one pipe 2 meters long. We make rack supports: we fasten two pipes at an acute angle using welding (we fasten the logs with large nails, driving them in not completely to bend them). We attach the remaining workpiece to the corners of the supports: weld or nail. We dig the lower ends of the support into the ground, for reliability they can be cemented. The rack can be reinforced with additional slats, as shown in the photo.

Seat types.

If you have a wide tire, for example, from a tractor, you can make a seat - a hammock. Here are a few options.

Cut the tire in half; clean and paint it; on the sides we attach bolts with loops; hang the swing on a rope.

Cut off the sides. We cut an opening in the large ring, so that a bed remains on two thin rings. We tie ropes on the rings and hang them.

We put the tire vertically and cut off half of the upper part. Cut out the pattern on the free parts of the sides. We hang a rubber hammock, as described above.

Video on the topic of the article

If you still have questions about making a tire swing, then the following video tutorials will be useful to you.

Categories

Popular