Using the energy of the magnetic current. Do-it-yourself free energy generator: scheme Electricity from a magnet is not scientific methods
What can you say about the idea that you can do without power plants and all kinds of power transmission lines and have electricity everywhere, in every device, whether it is an electric heater, refrigerator, lamp, car, and anything else.
We were given the most perfect miracle, but we don’t see it. We played in childhood and forgot. In schools, they hammered that this is just an unsuitable thing / toy and we believed it, including all engineers and all scientists. They work, invent all sorts of useful things, but their thoughts are distracted from the main thing, and it turns out that everything that has been done so far is deeply erroneous.
And what will happen to me if I say that it's time to cancel everything that Tesla has worked out and forget like a nightmare? Let's repeat; power plants, high-voltage and low-voltage lines, all wires from cars and houses, all sockets and equipment starters, we will exclude from our lives + more dangerous in every respect, gas lines and propane cylinders, all types of fuel and even firewood.
All this and infinitely more can be done if you learn to use the power of a permanent magnet. But it exists, it is real. These are not some fairy tales about perpetual motion machines or obscure ethereal energies. The magnet contains endless energy. It is quite strong; Try to separate two medium magnets, or tear them off the metal. Now think that the power of a small or large magnet can be made to do something - because it would be great! And after all, magnets work in all generators, although a gasoline engine turns them there, but this is old .. Under Tesla, there were no technologies that could imitate the rotation of rotors in generators, but the time has come and we can do it.
The age-old problem with magnets is that they grab hold of the poles and won't let go. To overcome this resistance, we have to use motors. Then the poles interact with the magnets and electrical impulses are produced. It is not possible to operate a magnet, to influence its constant field, it will rather demagnetize than give us a variable force. It is the same with the materials of the interacting poles. If the steel is magnetic, then it is only magnetic and will be drawn to the magnet. The way out is the easiest;
It is necessary to create a material with variable properties, magnetic and non-magnetic, but with the ability to control them. This means working with electrons and placing them in layers, as in transistors / thyristors, and releasing two conductors from the resulting plates to connect and supply pulses that form electricity.
The initial / sort of exciting / triggering pulses can be obtained from a simple two-transistor generator with a battery. The power of the generator can be controlled by operating the low-voltage part of the device, a small or larger resistor / rheostat. Thus, you can get not only electricity with a frequency of 50 Hz, but any kind, for any purpose. For lamp burning, refrigerator, heater operation, etc. it is possible to generate low-voltage voltage, besides, hide the generator inside the device.
Traction motors will have magnets on the rotor, plates of special material / semiconductor / around the stator and a system for switching them like running lights. These are several transistors with a battery and a rheostat. And no conductors or windings inside! Such an engine is also able to provide full braking and traction control when cornering. Each wheel is an engine and a brake inside and no transmissions, clutches, hydraulic cylinders with lines and cables for brakes.
Each light bulb has its own WiFi-controlled mini generator and zero wiring in the car. All this is possible and is already being done. No mechanics to repair except as body straighteners!
No electricians, power engineers, accountants and counters, no danger of electric shocks and fire.
The oil will be used to make plastics and asphalt sidewalks, because roads can be canceled, but this is when everyone has a replacement car, which will also use a magnet. Lots of small magnets..
All this is possible with the use of a special effect called "spin electron" in the corresponding material, developed in 2001. Material technology report: People did not make any secrets, they just did not find a use for their development and posted it on the net.
Spinning electrons Electrons have a property called spin. This spinning creates a magnetic field with N and S poles, just as the spinning Earth has magnetic poles. Note that the N pole on an electron is really a North-seeking pole, just as in a magnet. If electrons in the shells of an atom spin in the same direction, the atom will exhibit a magnetic field and will respond to the forces of a magnet. If half of the electrons spin one way and the rest spin the other way, they will neutralize each other and the material will not be affected by a magnetic field This atom is barely magnetic because all its electrons are not aligned http://www.school-for-champions.com/science/magnetic_factors.htm Magnetic fields can change the direction of spins by inducing "precession" which is an additional rotation of the spin orientation about the magnetic field, similar to the periodic movement of the axis of a top after it is spun. While the speed of electron spin precession in a magnetic field is generally fixed by the particular materials used, the research reported in Nature has shown that both the speed and direction of precession can be continuously adjusted by applying electric fields in specially engineered quantum structures. Transl: Electrons have a property called spin. This rotation creates a magnetic field with N and S poles, just like the Earth has magnetic poles. The North Pole on the electron is looking for the North Pole in the magnet. If the electrons in an atom's shells rotate in the same direction, the atom will exhibit a magnetic field and will respond to the force of the magnet. If half of the electrons spin in one direction and the rest spin in the other direction, they will cancel each other out and the material will be non-magnetic. Spinning electrons Electrons have a property called spin. This spinning creates a magnetic field with N and S poles, just as the spinning Earth has magnetic poles. Note that the N pole on an electron is really a North-seeking pole, just as in a magnet. If electrons in the shells of an atom spin in the same direction, the atom will exhibit a magnetic field and will respond to the forces of a magnet. If half of the electrons spin one way and the rest spin the other way, they will neutralize each other and the material will not be affected by a magnetic field This atom is barely magnetic because all its electrons are not aligned http://www. school-for-champions.com/science/magnetic_factors.htm Magnetic fields can change the direction of spins by inducing "precession" which is an additional rotation of the spin orientation about the magnetic field, similar to the periodic movement of the axis of a top after it is spun. While the speed of electron spin precession in a magnetic field is generally fixed by the particular materials used, the research reported in Nature has shown that both the speed and direction of precession can be continuously adjusted by applying electric fields in specially engineered quantum structures.
Electrons have a property called spin. This rotation creates a magnetic field with N and S poles, just like the Earth has magnetic poles. The North Pole on the electron is looking for the North Pole in the magnet. If the electrons in an atom's shells rotate in the same direction, the atom will exhibit a magnetic field and will respond to the force of the magnet. If half of the electrons spin in one direction and the rest spin in the other direction, they will cancel each other out and the material will be non-magnetic.
It is up to everyone to help promote this idea locally. Offer local academies or institutes working with electrical materials or having equipment for the production of transistors, or nanotechnology. Just get an audience with the president of the academy of sciences, etc. and do not get off them until they understand the meaning and will develop a device for applying layers, making a plate, which is no more than a transistor in complexity.
We must begin by distributing this article by all means.
Then your country will be the first in the production of spin generators, and not in the export of resources. But keep in mind this information is also spreading to other countries ... This is how lucky / perceive this fantasy at first glance.
The electricity bill is an inevitable expense item for anyone modern man. Centralized power supply is constantly becoming more expensive, but electricity consumption is still growing every year. This problem is especially acute for miners, because, as you know, cryptocurrency mining consumes a significant amount of electricity, and therefore the bills for its payment may exceed the profit from. Under such conditions, it is worth paying attention to the fact that almost all Natural resources can be used to convert to electricity. Even in the air there is static electricity, it remains only to find methods to use it.
Where can I get free electricity?
You can get electricity from everything. The only condition: you need a conductor and a potential difference. Scientists and practitioners are constantly looking for new alternative sources of electricity and energy that will be free. It should be clarified that free means no payment for centralized energy supply, but the equipment itself and its installation still cost money. True, such investments are more than paid off later.
At the moment, free electricity is produced from three alternative sources:
| The method of obtaining electricity | Power generation features |
|---|---|
| solar energy |
Requires the installation of solar panels or a collector of glass tubes. In the first case, electricity will be generated due to the constant movement of electrons under the influence of sun rays inside the battery, in the second - electricity will be converted from heat from heating. |
| wind energy |
When the wind blows, the blades of the windmill will begin to actively rotate, generating electricity, which can be immediately supplied to the battery or network. |
| geothermal energy |
The method consists in obtaining heat from the depths of the soil and its subsequent processing into electricity. To do this, a well is drilled and a probe with a coolant is installed, which will take part of the constant heat that exists in the depths of the earth. |
Such methods are used both by ordinary consumers and on a large scale. For example, huge geothermal plants are installed in Iceland and generate hundreds of MW.
How to make free electricity at home?
Free electricity in the apartment must be powerful and constant, so a powerful installation will be required to fully ensure consumption. The first step is to determine the most appropriate method. So, for sunny regions, installation is recommended. If a solar energy not enough then wind or geothermal power plants should be used. The latter method is particularly suitable for regions located in relative proximity to volcanic zones.
Having decided on the method of obtaining energy, you should also take care of the safety and security of electrical appliances. To do this, the home power plant must be connected to the network through an inverter and voltage regulator to ensure the supply of current without sudden surges. It should also be borne in mind that alternative sources are quite capricious to weather conditions. In the absence of relevant climatic conditions power generation will stop or be insufficient. Therefore, you should also powerful batteries for accumulation in case of lack of production.
Ready-made installations of alternative power plants are widely represented on the market. True, their cost is quite high, but on average they all pay off from 2 to 5 years. You can save money by purchasing not a ready-made installation, but its components, and then design and connect the power plant on your own.
How to get free electricity in the country?
Connecting to a centralized power supply system is a problematic process and cottages often remain without electricity. for a long time. This is where the installation of a diesel generator or alternative mining methods can come to the rescue.
In summer cottages, a huge number of electrical appliances are often not available. As a result, power consumption is much less. First you need to determine the preferred period of time that will be spent indoors. So for summer summer residents, solar collectors and batteries are suitable, for the rest, wind methods.
You can also power individual electrical appliances or illuminate a room by collecting electricity from grounding. Scheme for receiving free electricity: zero - load - earth. The voltage inside the house is supplied through the phase and neutral conductor. By including in this circuit the third load conductor to zero, it will be directed from 12W to 15W, which will not be recorded by metering devices. For such a circuit, it is imperative to take care of reliable grounding. Zero and earth do not carry the danger of electric shock.
Free electricity from the earth
Earth favorable environment to extract electricity. There are three environments in the soil:
- humidity - drops of water;
- hardness - minerals;
- gaseousness - air between minerals and water.
In addition, electrical processes are constantly taking place in the soil, since its main humus complex is a system, on the outer shell of which a negative charge is formed, and on the inner shell a positive one, which entails a constant attraction of positively charged electrons to negative ones.
The method is similar to that used in conventional batteries. To obtain electricity from the ground, two electrodes should be immersed in the ground to a depth of half a meter. One is copper, the other is galvanized iron. The distance between the electrodes should be about 25 cm. The soil between the conductors is filled with saline, and wires are connected to the conductors, one will have a positive charge, the other will have a negative charge.
AT practical conditions the output power of such an installation will be approximately 3W. The charge power also depends on the composition of the soil. Of course, this power is not enough to provide power in a private house, but the installation can be strengthened by changing the size of the electrodes or connecting the required number in series. After the first experiment, you can roughly calculate how many such installations will be needed to provide 1 kW, and then calculate the required amount based on the average consumption per day.
How to get free electricity out of thin air?
For the first time, Nikola Tesla spoke about obtaining electricity from the air. The scientist's experiments proved that there is static electricity between the base and the raised metal plate, which can be accumulated. In addition, the air in the modern world is constantly subjected to additional ionization due to the functioning of many electrical networks.
The soil can act as the basis for the mechanism for extracting electricity from the air. A metal plate is placed on the conductor. It should be placed above other nearby objects. The outputs from the conductor are connected to a battery in which static electricity will accumulate.
Free electricity from power lines
Power lines carry a huge amount of electricity through their wires. An electromagnetic field is created around the wire in which the current flows. Thus, if a cable is placed under a power transmission line, then an electric current is formed at its ends, the exact power of which can be calculated, knowing how much power the current is transmitted through the cable.
Another way is to build a transformer near power lines. A transformer can be created using copper wire and a rod using the primary and secondary winding. The output power of the current in this case depends on the volume and power of the transformer.
It is worth considering that such a system of obtaining free electricity is illegal, although there is no actual illegal connection to the network. The fact is that such wedging into the power supply system damages its power and can be punished with fines.
Free electricity from a surge protector
Many seekers of free electricity must have found versions on the Internet that an extension cord can become a source of endless energy. free energy, forming a closed circuit. To do this, take a surge protector with a wire length of at least three meters. Fold a coil from the cable, with a diameter of not more than 30 cm, connect it to the consumer's outlet, isolate all free holes, leaving only one more outlet for the plug of the extension cord itself.
Next, the network filter must be given an initial charge. The easiest way to do this is to connect the extension cord to a functioning network, and then close it in yourself in a split second. Free electricity from an extension cord is suitable for power supply lighting fixtures, but the power of free energy in such a network is too small for anything more. And the method itself is quite controversial.
Free electricity from magnets
A magnet emits a magnetic field and as a result, it can be used to extract free electricity. To do this, wind the magnet copper wire, forming a small transformer, placing it near the electrical magnetic field you can get free energy. The power of electricity in this case depends on the size of the magnet, the number of windings and power. electromagnetic field.
How to use free electricity?
When deciding to replace the centralized energy supply with alternative sources, all necessary security measures should be taken into account. To avoid sudden voltage drops, electric current to the devices must be supplied through voltage stabilizers. Be sure to pay attention to the dangers of each method. Thus, immersion of electrodes into the soil implies the subsequent flooding of the soil with saline, which will make it unsuitable for further plant growth, and systems for the accumulation of static electricity from the air can attract lightning.
Electricity is not only useful, but also dangerous. Incorrect phasing can lead to electric shocks, and a short circuit in the network can lead to fires. It is necessary to approach the provision of electricity at home with detailed study methods and laws of physics.
It should also be taken into account that most methods do not provide stable power and depend on many factors, including weather conditions which are impossible to predict. Therefore, it is recommended to either accumulate energy in batteries, and just in case, have a spare type of power supply.
Forecast for the future
Already, alternative energy sources are widely used. The lion's share of electricity consumption is for household electrical appliances and lighting. By replacing their power supply from centralized to alternative, you can significantly save the budget. Miners should pay special attention to alternative sources of power supply, since mining on centralized power supply can take up to 50% of profits, while mining on free power supply will bring net income.
All more houses switches to solar panels or wind farms. Such methods give much less power, but are environmentally friendly energy sources that do not harm environment. Industrial alternative power plants are also being constructed.
In the future, this area will only be supplemented by new methods and improved analogues.
Conclusion
It is possible to extract electricity even from the air, but to cover all the needs of consumption, it is necessary to design a whole system of alternative electricity generation. Can go the easy way and buy ready-made solar panels or wind farms, or you can make an effort and assemble your own power plant. Now free electricity is not a fully explored area and opens up a lot of opportunities for independent experiments.
On the Internet, I did not find experimental - theoretical evidence of the possibility of obtaining such free energy from a magnetic field. As a first step in this direction, I decided to take direct measurements of the mechanical input and output electrical capacity the first small permanent magnet generator. For this, a special test bench was made, equipped with measuring instruments and tests have been carried out. After processing the results of these tests, I wrote the first scientific article, which I bring to your attention. Then I had a question, why are mass-produced permanent magnet generators not capable of self-rotation and obtaining free energy? To solve it, I took such a standard generator and tested it on the stand - as a result, a second Research Article. Based on the results of this article, the reasons for the unsuitability became clear existing structure generators for obtaining free energy. As a result, the design of a large generator was born, specifically designed to produce free energy. Such a generator has already been manufactured, but it is too early to talk about its testing, since the magnets have not yet been installed. They are expensive, but there is no money for them yet. These devices will find wide application both in individual use and in industry, for example, it would be very nice to introduce them into our own, high-tech production of translucent structures, which is ready to solve all your problems at any stage, from design to installation.
And you can read my articles. I am attaching the first article to this letter, and I will send the second as a separate file. I would like to discuss the problem of obtaining free energy from a magnetic field. So email me [email protected], Igor Vasilievich. Read articles and think.
In the meantime, I'm waiting for your letters!
The main articles by Igor Vasilievich on this topic are presented below.
To be continued.
Content:Exists a large number of devices related to the so-called "". Among them, there are numerous designs of current generators that make it possible to obtain electricity from a magnet. These devices use the properties of permanent magnets capable of performing external useful work.
Currently, work is underway to create a device that can drive a device that generates current. Research in this area is not yet fully completed, however, based on the results obtained, one can fully imagine its structure and principle of operation.
How to get electricity from a magnet
In order to understand how such devices work, it is necessary to know exactly how they differ from conventional electric motors. All electric motors, although they use the magnetic properties of materials, carry out their movement solely under the influence of current.
To operate a real magnetic motor, only constant energy magnets, with the help of which all necessary movements are performed. The main problem with these devices is the tendency of the magnets to static equilibrium. Therefore, the creation of a variable attraction comes to the fore, using the physical properties of magnets or mechanical devices in the engine itself.
The principle of operation of a permanent magnet motor is based on the torque of repulsive forces. There is an action of the same magnetic fields of permanent magnets located in the stator and rotor. Their movement is carried out in the opposite direction with respect to each other. In order to solve the problem of attraction, a copper conductor with an electric current passed through it was used. Such a conductor begins to be attracted to the magnet, but in the absence of current, the attraction stops. As a result, cyclic attraction and repulsion of the stator and rotor parts is provided.
The main types of magnetic motors
Over the entire period of research, a large number of devices have been developed that make it possible to obtain electricity from a magnet. Each of them has its own technology, but all models are united. Among them, there are no ideal perpetual motion machines, since magnets completely lose their qualities after a certain time.
The simplest device is the Lorentz anti-gravitational magnetic engine. Its design includes two disks with opposite charges connected to the power supply. Half of these disks are placed in a hemispherical magnetic screen, after which their gradual rotation begins.
The most real functioning device is considered simplest design rotary ring Lazarev. It consists of a container, which is divided in half by a special porous partition or ceramic disc. A tube is installed inside the disk, and the container itself is filled with liquid. First, the liquid enters the bottom of the container, and then, under the influence of pressure, the perspiration of the tube begins to move upward. Here the liquid begins to drip from the bent end of the tube and again enters the lower part of the container. In order for this structure to take the form of an engine, a wheel with blades is located under the drops of liquid.
Magnets are installed directly on the blades, forming a magnetic field. The rotation of the wheel accelerates, the water is pumped faster and, in the end, a certain maximum speed of the entire device is set.
The basis of the Shkondin linear motor is the arrangement of one wheel in another wheel. The whole structure consists of a double pair of coils with opposite magnetic fields. Due to this, their movement is ensured in different directions.
Perendev's alternative motor uses only magnetic energy. The design consists of two circles - dynamic and static. Magnets are located on each of them with the same sequence and intervals. The free force of self-repulsion sets the inner circle into infinite motion.
The use of permanent magnet devices
The results of research in this area already make us think about the prospects for the use of magnetic devices.
In the future, there will be no need for all kinds of chargers. Instead, magnetic motors of the most different sizes that drive miniature current generators. Thus, many laptops, tablets, smartphones and other similar equipment will work continuously for a long time. These power supplies will be swappable from old models to new ones.
Magnetic devices with higher power will be able to rotate such generators that will replace the equipment modern power plants. They can easily work instead of internal combustion engines. An individual power supply system will be installed in each apartment or house.
Universal use of electricity in all areas human activity associated with the search for free electricity. Because of this, a new milestone in the development of electrical engineering was an attempt to create a free energy generator that would significantly reduce the cost or reduce the cost of generating electricity to zero. The most promising source for the implementation of this problem is free energy.
What is free energy?
The term free energy arose at the time of the large-scale introduction and operation of internal combustion engines, when the problem of obtaining electric current directly depended on the coal, wood or oil products spent for this. Therefore, free energy is understood as such a force, for the production of which there is no need to burn fuel and, accordingly, to spend any resources.
The first attempts to scientifically substantiate the possibility of obtaining free energy were laid by Helmholtz, Gibbs and Tesla. The first of them developed the theory of creating a system in which the generated electricity must be equal to or greater than that spent for the initial start-up, that is, obtaining a perpetual motion machine. Gibbs suggested the possibility of obtaining energy during the flow chemical reaction so long that it is enough for a full power supply. Tesla observed energy in all natural phenomena and expressed the theory of the presence of ether - a substance that permeates everything around us.
Today you can observe the implementation of these principles for obtaining free energy in. Some of them have long been at the service of mankind and help to receive alternative energy from wind, sun, rivers, tides and tides. These are the same solar panels, hydroelectric power plants that helped to curb the forces of nature, which are freely available. But along with already justified and implemented free energy generators, there are concepts of fuelless engines that try to circumvent the law of conservation of energy.
The problem of conservation of energy
The main stumbling block in getting free electricity is the law of conservation of energy. Due to the presence of electrical resistance in the generator itself, connecting wires and other elements electrical network, according to the laws of physics, there is a loss of output power. Energy is consumed and its replenishment requires constant replenishment from the outside, or the generation system must create such an excess electrical energy enough to power the load and keep the generator running. From a mathematical point of view, a free energy generator must have an efficiency of more than 1, which does not fit into the standard physical phenomena.
Diagram and design of the Tesla generator
Nikola Tesla became the discoverer of physical phenomena and created many electrical devices based on them, for example, Tesla transformers, which are used by mankind to this day. Throughout the history of his activity, he has patented thousands of inventions, among which there is more than one free energy generator.
Rice. 1: Tesla Free Energy Generator
Look at Figure 1, here is the principle of generating electricity using a free energy generator assembled from Tesla coils. This device involves obtaining energy from the ether, for which the coils included in its composition are tuned to a resonant frequency. To obtain energy from the surrounding space in this system, the following geometric relationships must be observed:
- winding diameter;
- wire sections for each of the windings;
- distance between coils.
Known today various options the use of Tesla coils in the design of other free energy generators. However, no significant results of their application have yet been achieved. Although some inventors claim the opposite, and keep the result of their developments in the strictest confidence, demonstrating only the final effect of the generator. In addition to this model, other inventions of Nikola Tesla are known, which are generators of free energy.
Magnetic free energy generator
The effect of the interaction of a magnetic field and a coil is widely used in. And in a free energy generator, this principle is used not to rotate a magnetized shaft by supplying electrical impulses to the windings, but to supply a magnetic field to an electric coil.
The impetus for the development of this direction was the effect obtained by applying voltage to an electromagnet (a coil wound on a magnetic circuit). In this case, a nearby permanent magnet is attracted to the ends of the magnetic circuit and remains attracted even after the coil is powered off. A permanent magnet creates a constant flux of a magnetic field in the core, which will hold the structure until it is torn off by physical force. This effect was applied in the creation of a permanent magnet free energy generator circuit.
Rice. 2. The principle of operation of the generator on magnets Look at Figure 2, to create such a free energy generator and power the load from it, it is necessary to form an electromagnetic interaction system, which consists of:
- starting coil (I);
- locking coil (IV);
- supply coil (II);
- support coil (III).
The circuit also includes a control transistor VT, a capacitor C, diodes VD, a limiting resistor R and a load Z H.
This free energy generator is turned on by pressing the "Start" button, after which the control pulse is applied through VD6 and R6 to the base of the transistor VT1. When a control pulse arrives, the transistor opens and closes the current flow circuit through the starting coils I. After that, electric current flows through the coils I and excites the magnetic circuit, which will attract a permanent magnet. By closed circuit magnetic core and permanent magnet will flow magnetic field lines.
EMF is induced from the flowing magnetic flux in coils II, III, IV. The electrical potential from the IV coil is fed to the base of the transistor VT1, creating a control signal. The EMF in coil III is designed to maintain the magnetic flux in the magnetic circuits. The EMF in coil II provides power to the load.
The stumbling block in the practical implementation of such a free energy generator is the creation of a variable magnetic flux. To do this, it is recommended to install two circuits with permanent magnets in the circuit, in which the lines of force have the opposite direction.
In addition to the above free energy generator on magnets, today there are a number of similar devices designed by Searle, Adams and other developers, the generation of which is based on the use of a constant magnetic field.
Followers of Nikola Tesla and their generators
The seeds of incredible inventions sown by Tesla created in the minds of applicants an unquenchable thirst to translate into reality the fantastic ideas of creating a perpetual motion machine and send mechanical generators to the dusty shelf of history. The most famous inventors used the principles set forth by Nikola Tesla in their devices. Consider the most popular of them.
Lester Hendershot
Hendershot developed a theory about the possibility of using the Earth's magnetic field to generate electricity. Leicester presented the first models back in the 1930s, but they were never in demand by his contemporaries. Structurally, the Hendershot generator consists of two counter-wound coils, two transformers, capacitors and a movable solenoid.
Rice. 3: general form Hendershot generator The operation of such a free energy generator is possible only with its strict orientation from north to south, therefore, a compass must be used to set up the work. Coils are wound on wooden bases with multidirectional winding in order to reduce the effect of mutual induction (when inducing an EMF in them, in reverse side EMF will not be induced). In addition, the coils must be tuned by a resonant circuit.
John Bedini
Bedini introduced his free energy generator in 1984, a feature of the patented device was an energizer - a device with a constant torque that does not lose momentum. This effect was achieved by installing several permanent magnets on the disk, which, when interacting with the electromagnetic coil, create impulses in it and repel from the ferromagnetic base. Due to this, the free energy generator received the effect of self-feeding.
Later Bedini generators became known through a school experiment. The model turned out to be much simpler and did not represent something grandiose, but it was able to perform the functions of a generator of free electricity for about 9 days without outside help.
Rice. four: circuit diagram Bedini generator Look at Figure 4, here is a schematic diagram of a free energy generator of the same school project. It uses the following elements:
- a rotating disk with several permanent magnets (energizer);
- a coil with a ferromagnetic base and two windings;
- battery (in this example it has been replaced with a 9V battery);
- control unit of a transistor (T), resistor (R) and diode (D);
- the current collection is organized from an additional coil that feeds the LED, but it can also be powered from the battery circuit.
With the start of rotation, permanent magnets create a magnetic excitation in the core of the coil, which induces an EMF in the windings of the output coils. Due to the direction of the turns in the start winding, the current begins to flow, as shown in the figure below, through the start winding, resistor and diode.
Rice. 5: Starting the Bedini Generator When the magnet is directly above the solenoid, the core is saturated and the stored energy becomes sufficient to open the transistor T. When the transistor is opened, the current begins to flow in the working winding, which recharges the battery.
Figure 6: Starting the floating charge winding The energy at this stage becomes sufficient to magnetize the ferromagnetic core from the working winding, and it receives the pole of the same name with a magnet located above it. Thanks to the magnetic pole in the core, the magnet on the spinning wheel is repelled from this pole and accelerates the further movement of the energizer. With the acceleration of the movement, the pulses in the windings occur more and more often, and the LED switches from a flashing mode to a constant glow mode.
Alas, such a free energy generator is not perpetual motion machine, in practice, he allowed the system to work dozens of times longer than it could function on a single battery, but eventually stops anyway.
Tariel Kapanadze
Kapanadze developed a model of his free energy generator in the 80-90s of the last century. mechanical device was based on the work of an improved Tesla coil, as the author himself claimed, a compact generator could feed consumers with a power of 5 kW. In the 2000s, the Kapanadze generator industrial scale 100 kW tried to build in Turkey, according to technical specifications he needed only 2 kW to start and work.
Rice. 7: Kapanadze generator circuit diagram The figure above shows a schematic diagram of a free energy generator, but the main parameters of the circuit remain a trade secret.
Practical schemes of free energy generators
Despite the large number of existing free energy generator circuits, very few of them can boast of real results that could be tested and repeated at home.
Rice. eight: working scheme Tesla generator Figure 8 above is a free energy generator circuit that you can replicate at home. This principle was set forth by Nikola Tesla, for its operation a metal plate is used, isolated from the ground and located on some kind of hill. The plate is a receiver of electromagnetic oscillations in the atmosphere, this includes a fairly wide range of radiation (solar, radio magnetic waves, static electricity from movement air masses etc.)
The receiver is connected to one of the capacitor plates, and the second plate is grounded, which creates the required potential difference. The only stumbling block to its industrial implementation is the need to isolate the plate on a hill large area to feed at least a private house.
Modern look and new developments
Despite widespread interest in the creation of a free energy generator, to oust from the market classic way they still can't get electricity. The developers of the past, who put forward bold theories about a significant reduction in the cost of electricity, lacked the technical perfection of the equipment or the parameters of the elements could not provide the desired effect. And thanks to scientific and technological progress, humanity receives more and more new inventions that make the embodiment of a free energy generator already tangible. It should be noted that today free energy generators operating on the power of the sun and wind have already been received and actively operated.
But, at the same time, on the Internet you can find offers to purchase such devices, although for the most part these are dummies created to deceive an ignorant person. And a small percentage of really working free energy generators, whether on resonant transformers, coils or permanent magnets, can only cope with the power supply of low-power consumers, provide electricity, for example, a private house or lighting in the yard they can't. Free Energy Generators – promising direction, but their practical implementation is still not implemented.