Cement sand tile braas average density. Natural roofing made of sand and cement. Benefits of "Braas" tiles
Braas natural tiles are produced at the Moscow plant of the Lafarge construction concern. Products meet world quality standards, and automated precise control in production and high tech guarantee maximum service life.
Natural tile style
Cement sand tiles- an excellent choice if the client prefers natural roofing materials. The high demand for natural roofing materials from this manufacturer is due to their technical properties. Despite the fact that the cost of Braas products cannot be called low, its quality and indicators of strength and durability contribute to an annual increase in sales.
Braas tiles are environmentally friendly pure material, made from high quality clay. This roofing material is durable and will serve you for more than 100 years without requiring additional care. The lineup has a rich color palette. This type very durable and will withstand any load, whether it be wind, snow or temperature effects.
For the manufacture of natural Braas, the cost of which is offset by the magnificent view, using environmentally friendly quartz sand and cement. To prevent the roof from fading, dyes, including iron oxide, are added to cement mortar. Staining "in bulk" allows you to achieve a uniform shade throughout the thickness of the tile and endow it with resistance to fading.
Characteristics:
- production from high-quality natural raw materials;
- immunity to ultraviolet radiation and other atmospheric factors;
- ability to withstand significant low and high temperatures, as well as a sharp drop temperature regime;
- wear resistance;
- resistance to mechanical and chemical stress;
- high soundproofing performance of cement-sand tiles;
- natural ventilation of the roof space, due to the free position of the tiles;
- preservation performance characteristics throughout the entire service life, lasting more than a hundred years.
Models of cement-sand tiles Braas
Braas is represented in the consumer market with a wide range of colors that can meet the needs. However, differing from each other in the type of profile or color, its models are in perfect harmony with the building of any architecture.
Frankfurt, Coppo di Greece, Amber, Taunas, Adria - these models are characterized not only by differences in profile design, but also by their unique color scheme. Here you can find both monophonic and colorful proposals, reminiscent of the sleeping areas of tropical cities. The price of Braas depends on the chosen model, color and amount of material.
Time only decorates the cement-sand tile, it acquires a characteristic touch of time, which does not destroy it, but makes it even stronger and more resilient.
Our company offers to buy Braas tiles in a wide network of our sales offices in Moscow and Moscow Region. Our managers will be happy to help you choose best option colors of this roofing material. natural roof Braas is absolutely reliable, which is confirmed by a written manufacturer's warranty and product quality certificates.
The lineup
 |
Profile Braas Coppo di Grezia The Coppo di Grezia profile during restoration work allows architects to accurately select a color that does not violate the harmony of the monument, and during the construction of new objects - to create picturesque roofs in accordance with the architectural design. |
|||||||||
 |
Combines classic and modern. The Frankfurt profile Braas is a classic of European roofing architecture. Unaffected by fashion, the "Frankfurt" tile embodies the true meaning of such concepts as reliability, quality and beauty. The range of colors and the most complete range of Braas additional elements (from passage and ventilation to antenna nozzles and snow retention of any colors) contribute to the versatility of using this model in individual and industrial construction. |
|||||||||
 |
The light, smooth wave of the profile of the Braas "Yantar" tile lies on the roofs of houses, creating true harmony with nature. A small cottage for one family or a luxurious mansion for several generations, a city building or a house in the forest - under the roof of "Yantar" you will feel the true comfort and coziness of a real House. |
|||||||||
 |
ProfileAdria
|
|
||||||||
 |
ProfileTaunus |
|
Installation instructions and certificates
Other manufacturers:
- Natural is made on German equipment and meets all European standards quality.
- from natural cement and quartz sand has a high degree of frost resistance and wind resistance. Raw materials from Sweden and Germany are used in production.
Shingles have been popular with private developers for many decades. Among private developers, roofing materials from Braas are in demand. The company retains its classic form roof panels. Brand products are of high quality and durability. Often the phrase "brass sand tiles" is used as a proper name, as the name of a roofing material.
general characteristics
The tile of "Braas" of any kind has high indicators of quality of production. Thanks to this, the popular brand was able to cope with serious competition from German and Finnish manufacturers of modern roofing. In addition to the right advertising course, Braas was able to stay afloat due to the unique features of the product:
- Ceramic tiles have a design life of at least 30 years. In fact, at good care its service life increases to 100 years.
- Cement-sand products retain their attractiveness even after 20 years of service. Thanks to unique technology the surface of the material is practically non-porous. At the same time, the tile has low level water absorption and high resistance to frost.
- The multi-layer Braas models are lighter than previous products. Since the products have a textured surface, bright colors, which do not fade even after several decades of operation of the material.
Important! Roofing material is laid on slopes having a slope angle of 18-55 degrees. The panels are fixed according to a simplified scheme - rows of ridge and cornices are installed on special cleats.
Benefits of "Braas" tiles
The main reason for the excellent quality of tiles of a popular company is the careful selection of raw materials. For ceramic products more often plastic clays are used, which contain a lot of silicates. At the same time, most of the products are made from clay, which is mined in two quarries of the company. After firing, the material becomes light durable. Some products are treated with vitreous glaze.
In fact, cement-sand tiles "Braas" require less cost for production than ceramic. Such products are made from certain types of cement. Granulated clay chips and a certain amount of limestone are added to the composition.
According to the passport, the Braas CPC is capable of handling a vertical load of up to 250 kg. This indicator is optimal. With a small angle of inclination of the roof, waterproofing should be further strengthened. If the slopes are steep, the tiles are fixed to regular corner elements.
Among the main disadvantages of the material, a large mass of the resulting roof is distinguished. For laying products on a gable structure, you will need to install twice as many load-bearing elements of the truss frame.
The practice of using "Braas" tiles
In addition to attractive appearance and resistance to various weather phenomena, Braas products have one interesting property. When mounting each element, it securely engages with the top and bottom panel. The connection also occurs with the tiles located on the sides. Thanks to this, the coating becomes durable and flexible, not subject to deformations of the crate and truss system.
According to the employees of the Braas company, the pressure of the tiles on the ground of the structure is minimal. You can calculate this indicator, knowing the mass of one element of the roofing material. To create the roof of a 6x6 m house, you will need at least 700 tiles. If one piece weighs 4 kg, the total load will be 2.5 tons. Therefore, the foundation and frame should be strengthened.
The design of fasteners for tile tiles allows you to quickly and conveniently replace several elements of one row. If there is a repair margin, the coating can be repaired many times. At regular care roofing material serves for quite a long time - until the destruction of the truss frame.
The design of the tiles does not allow the roof to be airtight. It is well ventilated. The roof is well protected from rain. If the slope angle is chosen correctly, the material is not afraid of frost, hail and large snow cover. You can walk on it without fear of deformation of the roof. If a ordinary tiles drops in gusty winds, Braas products have a shape and design that make them insensitive to sudden changes in weather.
Weight and dimensions
When choosing a material for a roof, you should find out what mass it has. The tiles are quite heavy. It weighs more than many roofing materials. The mass of ceramic tiles depends on the dimensions of the tiles.
A standard element of such material usually weighs 4.5 kg. For such a tile, a solid type crate should be made. The rafters are additionally reinforced before laying the roofing.
Important! Common options for tile sizes are 24x38 and 33x42 cm. Most manufacturers produce this material in just such dimensions.
Production technology
Tiles "Braas" are made in a certain sequence:
- First, the clay, which is extracted from the quarry, is delivered to the storage room.
- Then she lays down. The material is crushed, making the clay easier to mix with water.
- In the next stage, clay, plasticizers and water are mixed. The process is carried out by a special device.
- Then the resulting mass is pressed. The dimensions of all products are electronically controlled.
- At the next stage, the tiles are dried and fired.
Finished products can be left in their natural form. However, most types of tiles are coated with dye certain color. The material looks great on the roof of houses different design.
Preparing for laying tiles
Before work, you should check whether the frame elements are correctly positioned. They check the length of each roof slope, determine their diagonal dimensions and the lengths of the ridge runs. Then they check how even the plane of the crate is. It is important that the deviations are no more than 5 mm for every 2 m. 
Further installation is carried out in the following order:
- Pre-lay out the material in stacks of 5 pieces on opposite slopes. This ensures uniform pressure on the rafters.
- Then lay out the top and bottom row. When the tiles located on the edge of the roof at the gable are not fixed flush with the front board, half elements must be used.
- Then, with the help of a dyeing twine on the boards, the battens beat off the extreme columns of the gables. It is also necessary to mark every 5 vertical supports.
- Laying is done from right to left from bottom to top. To do the job as accurately as possible, you must constantly check with the vertical marking lines.
- First row roofing elements should be fastened with clamps. It is possible to use screws 4.5x50 mm.
- To move on a tiled roof, it is enough to have a safety harness.
If the tiles are laid on triangular slopes, mark the roof from their middle. First, find the height of all triangles. After laying out the vertical and bottom row. Then mark the vertical lines and mount the tiles from the bottom up from the height of each triangle towards the ridges.
Before laying the panels, you should correctly calculate the amount of material for the frame of the rafters. This will help make the roof stronger and more durable. To move around the roof without violating the integrity diffusion membrane, boards should be stuffed onto the counter-lattice, which will then be removed. On the cornice, the pitch of the crate is 32-39 cm.
findings
Braas tiles are great for newly built roofs and buildings that have been refurbished. It should be borne in mind that even with external simplicity, the installation of Braas tiles requires a certain professionalism.
In order to properly lay the roofing material, it is necessary to fill a layer of waterproofing, construct a counter-lattice, a 5x5 cm beam crate, and then begin the formation of the roof. When choosing tiles from two types - ceramic and cement-sand, it is worth knowing their features. For example, cement-sand products are subject to development on the surface a large number moss.
Features of natural tiles BRAAS
Manufactured on BRAAS DSK-1 in accordance with TU 5756-001-4154053-98, registered by GOSSTANDARD of Russia, BRAAS natural tiles have a Certificate of Conformity of the Gosstroy of Russia and a Hygienic Conclusion of the Center for State sanitary and epidemiological supervision, corresponds to the European level of quality.
A high level of quality tiles provide modern facilities control on the conveyor and strict laboratory control of both raw materials and finished products.
In the factory laboratory, Braas DSK-1 is regularly monitored: the geometry, strength, water resistance, color of the tile; in the German laboratory, its frost resistance is checked.
Each consumer of Braas DSK-1 tiles receives a written 30-year guarantee that within the specified period of time all tiles that have become unusable will be replaced free of charge, and the cost of replacing them will be reimbursed, subject to the installation instructions.
Cement-sand tiles BRAAS
Cement-sand tiles BRAAS are made from cement, natural quartz sand and pigments based on iron oxide. Such cement-sand tiles are not fired, but gain strength as a result of cement hardening. The quality of BRAAS cement-sand tiles to a large extent depends on the quality of the raw materials used and compliance with the production technology.
Unlike ceramic tiles, the color of cement-sand BRAAS is determined by special dyes that are added to concrete mass before shaping. These dyes do not affect the strength of the tiles and are resistant to solar radiation. After molding, the surface of cement-sand tiles is usually applied special composition, which seals the concrete surface and improves the appearance of the tiles. Unpainted natural tiles of gray (concrete) color are also produced, which are used mainly for the reconstruction of historical buildings.
Cement-sand tile BRAAS is somewhat cheaper than ceramic, although it has almost the same technical specifications: tensile and bending strength, very high heat and frost resistance, water resistance, good dimensional stability. In addition, cement-sand tiles also dampen noise well during rain or wind. Projected durability - more than 100 years. The roof of cement-sand tiles BRAAS serves as a decoration for any building.
Ceramic tile BRAAS
Ceramic tile BRAAS is an elite, prestigious material that requires almost no maintenance. For the manufacture of BRAAS ceramic tiles, fusible clays are used, which, unlike the clays used for making bricks, are fatter and more plastic.
The natural brick-red color of the material is given by iron oxides contained in clay, no special dyes are added. In the same time ceramic tiles BRAAS, produced by different factories, differs in shades, which is associated with the characteristics of the clay used.
You can distinguish natural BRAAS ceramic tiles by tapping on them. The sound should be loud and clear, not rattling. And outwardly, it differs from cement-sand tiles in the thickness of the tiles, the shape of the edge, and the natural brick color.
Comparative characteristics ceramic and cement-sand tiles BRAAS
| Specifications | Cement-sand | ceramic | |
| All models | OPAL | Other models | |
| Surface | smooth, granular | smooth | |
| Profile height, mm | (average) 25-31 | ||
| Dimensions, mm | (average) 330x420 | 180x380 | (average) 260x440 |
| Weight of one piece, kg | (average) 4.5 | 1,8 | (average) 3.5 |
| Material consumption, pcs / m 2 | (average) 10 | 34 | (average) 12 |
For the production of cement-sand tiles BRAAS - DSK1 uses high-quality natural raw materials. The main component is high quality washed sand, cement without additives, iron oxide pigments, water and dyes.
Cement-sand tiles BRAAS (sand tiles) are produced exclusively according to strictly specified standards from constantly checked raw materials. Cement-sand tiles, like ceramic tiles, have dozens of different colors and models, which makes the roof aesthetically attractive in all plans.
frankfurt
Roof tiles cement-sand BRAAS Frankfurt Classical slot model, Europe's most popular cement-sand tile for over 40 years. With the words "natural tiles" there is always an association with the "Frankfurt" profile - the classic solution of European roof architecture. Unaffected by fashion, the "Frankfurt" tile embodies the true meaning of the concepts of "reliability", "quality" and "beauty". The use of "Frankfurt" tiles on the roof is an opportunity to create the most daring architectural forms roofs from classical to modern. The color scheme and the most complete range of additional elements (from the entrance and ventilation roof tiles to antenna nozzles and snow retention of any colors) contribute to the versatility of using this model in individual and industrial construction.
Technical characteristics: Surface: smooth Dimensions: 330 x 420 mm Support length: 399 mm Profile height: 25 mm Estimated width: 300 mm Recommended slope: from 22 degrees Overlap: 7.5 - 10.8 mm Lathing pitch 31.2 - 34 .5 cm Consumption: 10 pcs/m2 Lathing thickness from 24/48 mm Weight: 4.5 kg/piece Calculated load (including batten): 0.50 kN/m2 at 10 pcs/m2 (sheathing pitch 33.3 - 34 .5 cm) 0.55 kN/m2 over 10 pcs/m2 (sheathing pitch 31.2 - 33.2 cm)
Amber
Cement-sand tile Yantar Feature of this model - a symmetric wave of its profile and the rounded lower edge. A light, smooth wave of the Yantar tile profile lies on the roofs of houses, creating true harmony with nature. A small cottage for one family or a luxurious mansion for several generations, a city building or a house in the forest - under the roof of the Yantar tile you will feel the true comfort of a real Home. No wonder many roofing materials outwardly imitate the profile of natural tiles "Yantar" - genuine quality and beauty are worthy of imitation! Tiling "Yantar" is the most economical way to give the house of your dreams the enduring charm and comfort of a "family nest".
Technical characteristics: Surface: smooth Dimensions: 330 x 420 mm Support length: 399 mm Profile height: 31 mm Estimated width: 300 mm Recommended slope: from 22 degrees Overlap: 7.5 - 10.8 cm 34.5 cm Consumption: 10 pcs/m2 Lathing thickness: from 24/48 mm Weight: 4.3 kg/piece Calculated load, including lathing: 0.50 kN/m2 at 10 pcs/m2 (sheathing pitch 33.3 - 34.5 cm) 0.55 kN/m2 over 10 pieces/m2 (sheathing pitch 31.2 - 33.2 cm)
Coppo di Greece
Cement-sand tiles Coppo di Greece High-profile model of a cement-sand tile with a granular surface and a variegated color scheme based on terracotta, straw, red and brown. This is an exclusive Italian high-profile model, characterized by the granular surface of the steep wave and the richness of its variegated colors based on several local colors. During restoration work, it allows architects to tactfully select a color that does not violate the harmony of the monument, and during new construction - to create picturesque roofs in accordance with the architectural design.
Technical characteristics: Dimensions: 333 x 420 mm Consumption: 10 pieces/m2 Weight: 4.9 kg/piece Packing: 42 pieces in a pack. 252 pcs per pallet. Cement-sand tiles Coppo di Greece Paying attention to the appearance of the roof and its role in the overall style decision of the house, it is necessary to emphasize the amazing combination of properties of the perfect cement-sand BRAAS system.
Taunus
An analogue of the famous Frankfurt tile, but with a more perfect coating and shape: a large wave of the model creates volume and relief.
Adria
The granular surface of the steep wave and the richness of the variegated coloration based on several local colors.
Unfading beauty will be created by soft lines of a natural tile of the Yantar and Frankfurt series. Their expressive profile, the highest quality of workmanship, together with an abundance color solutions and surface options will help to realize the most daring individual design projects.
The model "Coppo di Grecia" will undoubtedly become the favorite of many of its owners. Her design of waves with high profile, granular texture and fun game terracotta, straw, red and brown colors are the best way to designate a house in which peace and joy of life reign.
Only one material managed to survive decades and remain popular with fans of building materials made from natural and natural species raw materials - tiles. Today it is a natural tile "Braas". Among the many offerings of this kind of material, the products of the Braas-Monier Group stand out for their quality and commitment to classical forms tile coverings. In some countries, the phrase "Braas" has become a proper name, as the name of the roofing material.
What is a tile firm "Braas"
Any "Braas" tile is of the highest quality and manufacturing precision, which allows trademark Braas survive in the tough competition with the latest roofing materials from Germany and Finland. In addition to literate marketing policy, Braas stays afloat thanks to the unique properties of the tile material:
- Ceramic tile "Braas" has a guaranteed estimated service life of at least 30 years, regardless of the operating conditions and the level of maintenance of the roofing material. In fact, a Braas tiled roof can last up to a hundred years;
- Heavier and more durable cement-sand tiles of the Braas brand do not lose external data even after twenty years of operation. The manufacturing technology makes it possible to obtain a very dense, practically non-porous coating with low water absorption and high frost resistance;
- Multi-layer tiles produced by Braas are lighter than the first two, the textured surface allows you to get very bright and rich colors that do not fade even after two decades of operation.
Important! Installation of tiles is carried out on slopes with an angle of inclination from 18 to 55 degrees. In this case, the fastening of individual tiles is performed in a simplified form - with the help of special clamps, the cornice and ridge rows are fixed.
The secrets of the high quality of Braas tiles
The main secret High Quality tile material experts of the company "Braas" call a very accurate and balanced selection of raw materials in its manufacture. For the ceramic version, very plastic ones are used, with great content silicates, clays. Moreover, the vast majority of Braas ceramic tile products are made from clay mined in the company's two main quarries. In the process of production and firing, it turns out very light and durable material. For some models, the surface is covered with vitreous glaze.
In practice, cement-sand tiles "Braas" are cheaper than ceramic and easier to manufacture. Braas manages to obtain cement sand tiles with a very high performance strength through the use special varieties cement, limestone and ground granular clay chips. According to the passport, the cement-sand tile "Braas" withstands without destruction a vertical static load of 250 kg. This is more than enough to support the weight of the heaviest person.
With more low angles slope of the roof slope must be taken additional measures to enhance waterproofing. At higher angles of inclination, Braas shingles are fixed with the standard corner fixing.
The main disadvantages include the large weight of the roofing material. To lay tiles on gable roof, it will be necessary to at least double the number of struts and power elements.
The practice of using "Braas" tiles
In addition to the remarkable appearance and high resistance to rain, snow, scorching sun rays, Braas tiles have another interesting property. When laying, each element engages with the top and bottom, as well as with neighboring elements, resulting in a strong, heavy and at the same time flexible roofing, capable of adapting to the deformation of the rafters and battens.
According to the Braas specialists, the tiled roof exerts almost no pressure on the foundation of the house. But in practice, a little different information is obtained. For roofing even small house 6x6 meters will require at least 700-800 tiles. With a weight of one unit of 4 kg, the total load will be at least 2.5 tons. Therefore, the frame and foundation of the house must be made in a reinforced version.
The design of the fastening of tiles makes it quite easy to replace one or even several elements in a row. With a repair margin, such a roofing can be repaired an unlimited number of times, and in theory it will last until the roof beams and beams rot and crumble.
The design of the tile elements makes the roof not airtight, such as, for example, bituminous or roll coating but well ventilated and ventilated. At the same time, the slope of the tiled roof perfectly protects against any rain and snow. At right choice the angle of inclination of the tile is not afraid of frost, hail, a thick layer of snow, you can walk on it without the risk of splitting or damaging the coating. According to the assurances of the Braas company, the specific design and shape of the tiles make it insensitive to strong gusts of wind, while the usual ordinary tile often in such conditions it was dumped by excess pressure from the leeward side.