How to make colored homemade stickers. Rules for making a vinyl sticker at home Making stickers with your own hands

In a house where there are children, there is a lot of waste of money. That's what kids need new toy, then a book, then something else. In this article I would like to talk about how, at home, to at least a little, but save money and make the sticker exactly original.

Method 1

It will be easier, of course, to just buy a sticker in a store or order it from a printing house according to your own layout. However, it's not that interesting. So, how to make a sticker at home? In this case, you will need color or inkjet), as well as (it must match the printer). Now it remains to print the selected pattern, cut the film along the contour and stick it on the required surface - a car, a laptop cover, etc.

Method 2

Method 3

The next way is how to make a sticker at home. To do this, you need to select a suitable pattern, print it or cut it out, and then glue it to the desired surface (necessarily pre-degreased) using ordinary glue (PVA or silicate - depending on which surface the pattern will be glued to). The method is quite simple, but such stickers are short-lived, because they are not protected from moisture, they can quickly fade in the sun. By the same principle, you can plant drawings not on glue, but this is also a good option, but its disadvantages remain the same.

Method 4

A sticker can be prepared at home using the usual one. It is interesting that such a pattern will be glued specifically to clothes. To do this, you need to cut out the selected pattern from the bag, attach it to your pants or T-shirt, cover it with parchment paper (you can use baking paper of any color) and iron it well with a hot iron. If the pattern does not stick the first time, the operation should be repeated. It is worth noting that drawings will stick better small size, because the iron can easily walk on them at a time.

Method 5

Now I want to tell you how to do vinyl sticker, however, this will require the help of a printing house. First you need to prepare the layout. To do this, the selected drawing must be presented in vector form (this can be done independently using the Corel program). If there are no such skills, the printing house workers will gladly come to the rescue. The image is then transferred to film. This can also be done in a print shop, but you can try to do it yourself. To do this, you need to purchase a special film and apply a pattern on its surface on the reverse side. This will not be too difficult to do, because the indicated material is divided into squares. Now the sticker needs to be attached to the desired surface. This is a rather difficult and time-consuming stage. Also for this you need to stock up on mounting film. The pattern is superimposed on a dry, clean and flat surface, glued on top with a mounting film, smoothed with a squeegee. After that, the film is carefully removed. If any part has peeled off, it must be put in place and again stroked well with a squeegee. Everything, the product is ready and already in place!

Today, when there are any goods in stores, and printing houses offer the widest range of services, there is no urgent need to do something on your own. However, if you have a lot of ideas and a desire to create an interesting handmade, you can make a sticker at home. You will not need expensive materials and tools - just a little time, desire and imagination.

Why are stickers needed?

Sticker is not just a fun hobby familiar from childhood. Similar original parts can be part of the decor. This applies mainly to the children's room, which is design technique can transform in no time. Stickers will become interesting design pencil cases, jewelry boxes, toy boxes. For children it beautiful view creativity, but adults should also try their hand at it. Adhesive applications can decorate clothes, musical instruments, revive a boring lamp with a plain shade. They can be made from paper, film, fabric - the choice of options is huge. The main thing is to choose harmonious option. In a word, you are unlikely to find a more versatile decorative technique.

Where do we start?

There are several ways, let's start with the simplest. First you need to choose a picture. You can draw it yourself, by hand, or you can create in computer program. Which option to choose is up to you. Handmade always unique, but computer graphics then much easier to work with. However, both methods can be combined. To do this, you need to draw a sketch by hand, and then scan it and process it in a special program. You can print a drawing either on plain paper or on color - this is a matter of taste and depends mainly on the style of the drawing. Replicate the image - on a copier. Stickers are cut from a sheet and glued with the glue that is best suited for a particular surface - for example, PVA. Such stickers are made simply, but they cannot be called high-quality - they quickly fade in the sun, are unstable to moisture. And if the drawing was made with ink or a gel pen, its contours may blur over time.

Alternative option

If you want to make stickers in a small size, then the pattern is created in exactly the same way as in the first option. But we will glue it on with adhesive tape. Moreover, on one side it will be glued to back side images, and the second - on a wall or other suitable surface.

lamination

If you want to protect your drawing from moisture and sun rays, as well as from scratches and other mechanical damage, then the front surface must be laminated. To do this, you can take your drawing to the workshop. However, this can also be done at home. For this, transparent tape is used. The wider it is, the smoother the surface of the pattern will be. So that there are no wrinkles in the image, the adhesive tape is ironed with a ruler or a plastic card. Thermal film is also suitable for lamination at home. It is sold at any stationery store and simply ironed - it will look neater than scotch tape.

Self-adhesive paper and stencils

In stores you can find self-adhesive paper - plain or special decorating paper. The first drawing is applied with the most in the usual way- manually or using a printer. Decor paper has a smooth glossy surface, so ink and artistic paints are not suitable for this. If you want to draw on it, use special markers or gel pens. Markers are best taken for glass. In addition, Oracal decorating paper allows you to create stickers using the appliqué technique.

Can be used to create stickers stencils. Drawing on paper is stamped with a spray. This option is suitable for creating many identical stickers.

We decorate clothes

If you want to make a sticker on clothes, you will need other materials. You can cut your favorite picture from plastic bag and, using parchment paper as a base, attach the pattern to the fabric and iron it with an iron. Or apply the pattern on the polyethylene yourself. Using packages different color, you can do very interesting stickers in application technique. Just try to choose small drawings - large ones will look much worse.

Stickers - unusual decoration interior. They can decorate the kitchen, children's room and even the bedroom. You can use stickers to revive a dry work interior. It is useful to use them for children's creativity. After reading this article, you will learn how to make DIY stickers.

How easy is it to make them?

Stickers for kids are very easy to make. You will not need special materials and tools, everything can be found at home. We will tell you in detail how to make a sticker at home.

First, select the tools and materials. You will need:

dense White paper large format. How more sheet, the more stickers you get. Take too thin paper not worth it, because it will quickly get wet from the glue and tear.
Rulers, pencils, felt-tip pens, markers, paints - to create a drawing.
Stencils, children's coloring books and books.
Big brush.

Ingredients for making adhesive

Gelatin (approximately 8-10 grams).
Cold water (1 tablespoon).
Sugar syrup (1/2 tsp).
Lemon extract (1/2 tsp).
Hot water (3 tablespoons).

Sticker manufacturing technology

Step 1

Determine the size of future stickers. A sheet of paper must be divided into squares with a ruler and a pencil.

Take drawings from children's coloring books or books.

You can choose the drawing you like, and then print it on a printer or redraw it directly from the screen with a bright felt-tip pen onto a thin sheet of paper.

How to make a sticker so that everyone likes it? Look for images of famous characters from cartoons and fairy tales. In addition, butterflies and flowers are always beautiful. Before new year holidays you can make stickers with Christmas trees, snowmen, a symbol of the year.

Step 2

Decorate drawings. You can use not only traditional pencils, felt-tip pens and paints, but also glitter gels. The finished base with stickers does not need to be cut yet, we will cover it with adhesive.

Step 3

We make the adhesive base of the sticker.

To make DIY stickers, you will need homemade glue.

Gelatin should be poured into cold water and wait 40-60 minutes until it swells. Then heat up a bit and add sugar syrup and citric acid. The solution must not be brought to a boil. Remove the pan from the stove and wait until the composition cools down a little.

Step 4

Take a large brush and spread the glue on reverse side sheet. The glue should dry and the paper will curl up.

Step 5

Place the sticker sheet under the straightening press. For example, you can use a heavy book.

Step 6

Cut the stickers, wet with a damp cloth and stick.

Do not throw away any leftover glue. It will gel over time. Keep it tight closed jar. The shelf life of homemade glue is several months.

If you want to use again - put the container in a saucepan with warm water. Now you know how to make a sticker at home.

wall stickers

Another interesting way production of stickers - self-adhesive vinyl film.

Step 1

Choosing a film desired color. Choose so that the color matches the interior.

Step 2

We put the pattern on the film and cut it out. If you do not know how to make a sticker at home, pick up simple drawings. When you get the first masterpiece, you can paste entire compositions.

Step 3

Carefully cut out the pattern. It is important to first attach it to the wall and make notes with a pencil where the decor element will be placed.

Step 4

Preparing the wall for gluing. The wall must be smooth, clean and dry. Rust, old paint, dirt will interfere, and the sticker will look sloppy. In addition, the wall should not be greasy. Wallpaper, if they are pasted well, will only emphasize the beauty of the picture.

Step 5

Carefully lay out the sticker on a hard surface, smooth and peel off the paper base.

Step 6

Paste on the wall. If the sticker is large, it is better to stick it with an assistant. If you work alone, you can stick in parts. Smooth the finished drawing against the wall so that there are no bubbles or wrinkles left. Now admire your work of art.

A simple sticker can change the interior for the better. You have learned simple ways on how to make a sticker at home. We hope our tips will help you enjoy your creativity.

If you decide to start creating stickers with your own hands, our tips will definitely come in handy. There are several ways good advice, with which you can easily make an accessory at home. The main thing is to remember how to act, and be careful.

We make stickers at home. Simple Ways

Now you will learn a few good methods so that you can quickly, effortlessly, make a sticker at home. The costs will be minimal, but the result will please you.

There are some more nuances. They will come in handy. Here is what the expert notes: “If you use a self-adhesive film, you need to purchase it in stores that have managed to establish themselves well in the market. Otherwise, your parts may be of poor quality due to a poor adhesive surface.

Scissors must be sharp. Sometimes it is more convenient to use large rather than small scissors, as it is easy to cut the contour with them without making unnecessary jagged cuts. It is necessary to lead the scissors continuously, without folding them.

You will need

Adhesive paper, transparent self-adhesive film or wide transparent adhesive tape, laser or inkjet color printer, any graphics editor, scissors.

Instruction

First you need to come up with a sticker design. It can be any drawing with a catchy inscription. The image should be processed in any available graphics editor, such as Photoshop, Picasa or ACDSee and applied to .

If you own a color laser printer, you can use glossy paper on the glue base- This will ideal option for a sticker. Laser printing, unlike inkjet, will not “float” when it gets wet.