How to independently assemble the wardrobe compartment "Basya"? Easy do-it-yourself wardrobe assembly: instructions for performing Installation of the back wall

Self-assembly of furniture helps to save a lot cash. It is good if a person has simple skills in assembling objects. It will be useful for beginners to learn how to assemble a sliding wardrobe on their own. step by step installation of each element of the product will allow quick installation.

Among all types of products for storing clothes, the sliding wardrobe occupies a leading place today. It is multifunctional, roomy, available in different forms and dimensions, and also does not require additional space for opening doors. That is why most people, when choosing between a wardrobe and a wardrobe, prefer the latter option.

Assembling a sliding wardrobe with your own hands on the video presented is quite simple - for this it is enough to have in the apartment necessary tools and be familiar with the design of the product. Often, when ordering a cabinet without the services of assemblers, companies send a document containing a drawing of the product. It also lists all the component parts, which are numbered in order. Looking at the picture and comparing the elements of the cabinet, you can intuitively assemble the product.

To work according to the wardrobe assembly scheme, you will need the following tools:

  • building level– to check the evenness of the installation parallel to the floor;
  • corner;
  • rubber and regular hammer;
  • straight and Phillips screwdriver;
  • roulette;
  • pencil and ruler;
  • screwdriver;
  • wood drill - to make holes;
  • drill for metal - for installing an aluminum base.

From additional tools to assemble furniture on their own, a jigsaw, a drill and sandpaper. It is also necessary to prepare all the details of the cabinet, which means checking the diagram for the correct number of items. Pay attention to fittings and mechanisms: if there are drawers in the closet, ball guides should be included in the package.

Doors for the product are often supplied ready-made. They are pre-installed with rollers and a strip soft material. It is necessary to mount the door in the final phase.

Instruments

Assembly steps

To know how to get started, you should familiarize yourself with its stages. Most sliding wardrobes are assembled according to the following algorithm:

  • plinth;
  • frame;
  • installation of the back wall;
  • installation of shelves and guides;
  • sliding door installation.

After the completed stages, the implementation of internal additional elements. These include pull-out baskets, drawers, rods, hanging hooks and pantographs. Consider the installation of each element of the cabinet separately.

Assembly steps

plinth

The assembly of sliding wardrobes, the video of which is presented below, starts from the bottom, which accounts for the entire load during operation. We find a part that will perform this function, and put in front of you. In order for the process to go correctly, we use tools such as screwdrivers or a screwdriver, a hexagon, a pencil and a tape measure for marking. Also check the package for the presence of self-tapping screws and special camouflage plugs.

The algorithm of actions looks like this:

  • on the details for the bottom, a place is marked for installing the base;
  • sometimes instead of plinth planks adjustable legs are used, a place for which also needs to be marked;
  • drill holes for fasteners;
  • we attach the bottom to the slats with the help of confirmations (corners) - for this, self-tapping screws and a screwdriver are used;
  • we assemble the transverse supports of the base, designed for stability.

Some products, such as phoenix coupe models, require installation with adjustable feet. This is easy to do: the plastic plugs are cut off with a knife, and the legs themselves are screwed into holes prepared at the bottom with a diameter of 10 mm.

Depending on sizes assembled cabinet coupe, the number of legs will be regulated. So, for large planes, more than 6 support elements will be required.

Preliminary marking of the cabinet base

The base is easiest to assemble on furniture metal corners

Installing the legs

Finished plinth with legs

Frame

Before disassembling and assembling wardrobes from scratch, it is important to familiarize yourself with general structure existing product. Carefully study the diagram, because the assembly of the case should provide safe operation closet. From how securely it is installed, the stability of the internal elements will matter.

In order for the assembly of furniture to be accurate, you should additionally check the floor surface for evenness. Use the building level: if there are differences on the floor, tighten the adjustable legs. Only then assemble the product box.

To properly mount the case, follow these steps:

  • it is better to assemble the product while standing, because it is very difficult to mount a perfectly fitted cabinet in a lying position. But it is important to remember that for complete assembly it is necessary to leave at least 100 mm for roof mounting;
  • in the part that is responsible for the bottom, you must first drill a few holes and insert the anchor. Rack strips will be mounted on the installed fasteners;
  • installation of standing panels is carried out together: in order not to get confused, you can view the instructions for assembling the sliding wardrobe, presented in the video. First, the left sidewall is inserted, one person holds it while the second one inserts the right sidewall;
  • at the next stage, the middle stand is mounted, if it is present. After its installation, the installation of the roof takes place. If the cabinet is assembled in a standing position, then this part will be fixed correctly on the corners or confirmations.

It is a little more difficult to assemble a maestro model wardrobe with many functions. Its installation is carried out slowly, preferably by several people.

Fastening takes place with euro screws

Installation of the side and inner walls of the cabinet

The base is connected to the body with the help of confirmatory corners.

Back wall installation

To assemble the coupe yourself, in particular, to attach the back wall of the product, you need to correctly choose expendable materials- fasteners. Often, assemblers use incorrectly selected consumables, due to which, over time, the fiberboard panel moves away from the furniture product. AT Soviet times hardboard on the back wall was assembled with nails, which is undesirable today.

For greater reliability, attach the fiberboard wall to the cabinet using self-tapping screws. This is how the product will not be damaged during operation.

When assembling furniture for yourself, it is important to carry out quality assembly do-it-yourself sliding wardrobe: the video below clearly shows all the complex nuances. Perform the following manipulations:

  • put the hardboard panel behind the cabinet;
  • holding the sheet with your hands, use short self-tapping screws and use a screwdriver or screwdriver to screw them in at a distance of 10-20 cm.

If the cabinet has several rear walls at once, they must be fixed end-to-end. Use special tightening fasteners, then screw the screws onto the back of the middle bar.

Rear wall fixing

Installation of shelves and rails

In order not to have to disassemble the product and redo your work, check the reliability and stability of the frame, and then proceed to filling internal elements: shelves, rods, drawers and guides. Study self assembly sliding wardrobe can be on the video, which is at the bottom of the article. It visually provides information about all important points process.

You should pay attention to such nuances:

  • shelves can be fastened using corners and self-tapping screws. For this, the parts themselves already have drilled holes. We first note the distance between the shelves and fasten them to the sidewalls and the central standing bar;
  • first, the upper rails for the doors are installed, after which the lower rails are mounted. It is worth emphasizing that the installation of these elements must be carried out strictly in a straight line - the correct course of the doors will depend on this;
  • the bar is installed on special flanges that come with it in the kit. If necessary, the length of the pipe is filed with a hacksaw for metal. If a Fortune model cabinet is being assembled, you should pay attention to a large number of elements and not confuse them;
  • drawers and drawers are inserted into the product after attaching the mechanisms for their operation.

Before you mount internal filling, check the availability of all accessories and consumables.

Guide sliding system

Preparing holes on the rails

Before installing the guides, it is necessary to correctly position the stopper

Production under the order is possible;

2000*1200-4700rub

2000*1100-4600rub

2000*1000-4500rub

Delivery in St. Petersburg and Leningrad region next day after ordering. Payment upon receipt. Method of payment; Cash upon receipt, bank card at the address, bank transfer for legal entities. Delivery in St. Petersburg - 600 rubles. to the entrance Tariffs for delivery in the Leningrad region can be clarified with managers when placing an order. Self-delivery of the finished order from Bestuzhevskaya street, 2, from 11 to 21 Furniture is delivered unassembled, in its original packaging. Assembly by our specialists - 10% of the cost of furniture, but not less than 500 rubles. Climbing on foot - 80 rubles / box / floor. The number of boxes of a particular module must be specified when ordering. Elevator ride-100r box. ORDERING FURNITURE FROM 15000t.r DELIVERY IN THE CITY FREE DELIVERY Social discount 7% The discount is provided to pensioners, disabled people, labor veterans, combatants, families with more than 2 children. The discount is granted to the buyer-beneficiary PERSONALLY upon presentation of a "pension" or other appropriate document. The discount does NOT apply; for family members of the beneficiary, for goods at a discount and promotional goods.

We also take orders for the manufacture of furniture according to individual sizes, taking into account your budget.

We send furniture to other regions by transport companies.

If you by purchasing closet, decided to save money on furniture assemblers, then this article with detailed instructions and some secrets will help you assemble a closet without the mistakes that beginners usually make. We hope that this article will save you not only time for assembly and disassembly, but also your expensive nerves. Sliding wardrobes have different designs, and how to assemble them may differ slightly. We offer you the most common and common wardrobe, assembly instructions which will help during the assembly of other models.

Wardrobe assembly tool

To assemble the wardrobe, you need a screwdriver, a screwdriver, a set of hex keys, a tape measure, and a clerical knife. Sliding wardrobe with three doors sliding shelves and a hanger bar Cabinet plinth assembly There are two types of wardrobes, in some the plinth is screwed to the body separately, in others side walls are the basis of the plinth and are connected by a longitudinal planochka-plinth. This cabinet has a separate plinth, which is assembled using Minifixes(furniture corners).

The indent should be the same on all sides.
Make sure the corners are 90 degrees. Usually furniture makers use self-tapping screws with a size of 4 * 16. Sometimes the plinth can be screwed a little closer to the front side, if you have a room wide plinth. We nail the support legs to the base. Sometimes the manufacturer completes the cabinet with adjustable legs, with which the level of the cabinet is adjusted.
Cabinets are assembled for convenience mainly in a lying position, so it is recommended to provide enough space for mounting the cabinet in advance.

Assembling the cabinet body

Follow the enclosed instructions carefully. All parts and fasteners have their own designation. It is very important not to confuse the body parts, which at first glance are the same and may differ by only two or three holes. Otherwise, when the cabinet is almost assembled, you will have to disassemble it again and put the parts in their place. Lay the pieces of the side walls parallel. Important! Be careful not to confuse the top and bottom of the parts, as well as the front side with the back. The front side always has an edge, the back side can have a groove for the back wall made of fiberboard.


This cabinet is also assembled with furniture fasteners Rafix. A part that looks like a minifix, but has a plastic case. We screw the rods from the rafixes into the holes intended for them and tighten them with an eccentric. Be careful until the cabinet body is assembled and the back wall is installed, all fastenings can be easily break out. Do not skew cabinet parts, keep even corners. Installing the rear wall of the cabinet. After the cabinet body is assembled, the connections are tightened, it is necessary to turn the cabinet over and lay it face down. In order not to scratch the front of the cabinet, it is advisable to put cardboard or a rag under it. You can use cabinet packaging.

Cabinet Diagonal

Before fixing the wall of the cabinet, you need to set the diagonal so that all corners of the cabinet are 90 degrees. To do this, you need to measure the two diagonals of the cabinet with a tape measure. They must be equal in length (See the diagram). Some cabinets do not have a groove for the back wall and it is simply nailed to the end. It is better to use self-tapping screws or a stapler with long hardened staples. Since the wall usually consists of two or more parts, a connecting strip is provided at the junctions. If there is none, then it is better to fasten it to the internal parts with a stapler, since the thickness of the chipboard body is 16 or 18 mm, when you screw two parts of the fiberboard to it, you only have 9 mm left. stock. It is easy to miss with a self-tapping screw and go past the end of the part, where the back wall is connected and screwed.
Now the cabinet can be placed. Lifting is best done with an assistant. It's easier and safer that way. When the cabinet is installed in its place, you can mount the shelves. For this, either shelf holders, or corners, or rafiks are provided. We screw the rods of the raffixes into the sockets under them and lower the shelf on top of them. It's easier to start the installation with upper shelves.
We fasten the roller guides. Self-tapping screws should not protrude so as not to interfere with the course of the rollers.
Insert into guides assembled crates. They should slide out easily without rubbing. We fasten the flanges for the rod. Usually there is a markup for self-tapping screws. If not, then it is necessary to step back from above 7-10 cm, enough to be able to hang hangers.

Installation of wardrobe doors

Now that the cabinet is almost assembled, it remains to install the doors. It is desirable to pre-adjust the level of the cabinet. Otherwise, the doors will not close tightly.
To install the top rail, you need to drill at least 5 holes for self-tapping screws, two on each side and one in the middle. The guide should be aligned with the edge of the cabinet lid.
To install the lower guide, it is also necessary to drill three holes with a diameter of 4 mm, and chamfer with a larger diameter drill so that the head of the self-tapping screw is flush with the guide. Sliding wardrobe guides different manufacturers require a different indentation of the edge of the cabinet. To simplify the installation, you can simply put the guide on the installation site, and fix it when the doors are installed.
Installing the door in the rails. First, the upper rollers are inserted into the upper guide and raised to the stop, then the lower rollers are inserted.
First, two side doors are inserted into the second track, then the middle door into the first track.
The doors are adjusted with a hex wrench (sometimes with a “cross” screwdriver). When correctly set, the door should fit snugly against both walls of the cabinet.
Now you can glue the sealing brushes. First, the protective film is removed. Attention, after removal protective film It is not recommended to touch the place where the brush will be glued with your hands. Oily fingerprints will make the brushes stick worse.


Sliding wardrobe - one of the most convenient and compact ways of storage of things. It has small shelves for light items of clothing, and large ones for more voluminous things, there are ski storage compartments, a compartment equipped with a bar for placing outerwear etc.

Give compactness to the cabinet sliding doors, which do not require a place for plowing, they move on special rollers located inside the structure of the door itself. Even an inexperienced person in such matters can assemble such a cabinet, since the assembly principle is quite simple and does not require the use of special tools.

We read the instructions and sort the parts

First you need to carefully read the instructions and deal with the individual details - find the lower and upper elements, side racks, internal partitions.

If you confuse at least one part, then you are guaranteed to have to disassemble just now assembled structure and reinstall everything. Therefore, it is so important at the initial stage to correctly determine the location of all parts of the cabinet.

Assembling the frame

Install the base (bottom element) first.

As a rule, this plate is attached to stands located along long side, with the help of confirmations (these are the so-called euro screws, which have a recess in the cap for a special hex key).

Installing interior partitions

At the bottom end of the partitions there are holes into which dowels must be inserted before installation.

Shkant (chopik) is a small segment of the rod round section, which serves to strengthen wooden joints.

There are non-through holes in the bottom plate, which are designed for such dowels. Aligning the dowels and holes, we install the vertical partitions in their place (here you will need an assistant).

We fix the shelves

Now, in order to prevent the structure from loosening, we mount the shelves, which in this case work as stiffeners.

We fix them with the help of confirmations.

Fasteners at this stage must be wrapped to the end, leaving no free play.

We carry out the installation of side racks and top cover

Now the final part of the frame assembly is the installation of the side racks and the top cover. All three elements must be installed at the same time.

Although this action depends on design features and the location of the attachment points on these parts. First, we install the sidewalls, fastening them at the bottom with the base with confirmations.

Then we put the lid on top, combine the holes in all the details and also wrap the fasteners. Here you need to leave a little free play, as you will need to align the entire frame.

Aligning the structure

The alignment process consists of the following steps. It is necessary to measure first one diagonal with a tape measure, then the second one and, by the difference in values, determine in which direction you need to “squeeze” (move) the top of the cabinet so that its corners are perfectly straight.

Now you can wrap the confirmations to the end with effort.

Nailing chipboard sheets

The next step in the assembly will be nailing fiberboard sheets on the back of the cabinet.

These sheets will not only serve as a back wall, but also reliably keep the structure from loosening for the entire period of operation.

As a rule, canvases are decorative processing with front side in the form of a laminated colored surface. Sheets are fastened with small nails, which must be hammered into the ends of all cabinet elements (racks, partitions, shelves).

Here it is important to guess the place of nailing, because with reverse side cabinet parts are not visible, and damage resulting from incorrect selection adversely affects appearance products.

We place the rails - guides

Now the most crucial moment is the installation of the lower and upper rails for the doors. The bottom rail has two grooves for the movement of the rollers:

And the top is divided into two sections:

In both, you must first drill holes for the screws to attach them to the base and cover.

Holes must be chamfered for screwing flush.

It is enough to make 4 holes in each bar. We fix the bottom rail first, marking the corresponding attachment points.

The distance from the edge of the base to the leading edge of the rail should be 2.5 cm.

In order for the doors not to jam and they move evenly, it is necessary to install the cabinet strictly horizontally, which can be done using the usual building level.

The longer the level, the more accurate the horizontal indicators will be.

The upper rail is attached in the same way, with the only difference being that you need to drill holes in a checkerboard pattern in both compartments.

Screws from the kit supplied with the cabinet are used as fasteners.

From the front end of the top cover to the beginning of the rail edge, the distance should be 2 mm.

Installing rods and fittings

The final construction step will be the installation of a bar to accommodate outerwear.

First you need to mark the attachment points for one holder (it is attached with 3 screws), drill holes and tighten the screws.

Then install the second holder on the rod, pressing it with a screw.

The assembled structure must first be tried on, aligning it horizontally, and then outlined and attached with the same self-tapping screws.

We hang doors

Before this stage, you need to check the gutters in the lower bar for the absence of debris that will interfere with the movement of the rollers, once again make sure that the planes are horizontal and check all connections for rigidity.

The door is first inserted into the top rail.

And then the end rollers must be placed in the groove of the lower rail.

Thus, all 4 doors are installed (the main thing is not to confuse the pattern).

In principle, there is nothing complicated in the installation of a sliding wardrobe. You just need to take a responsible attitude to all stages of its assembly, and then you will find not only advanced training as home master, but also for sure gratitude for saving the family budget.

Assembly completed - result in the photo

Fitting © 2022 Design and interior of apartments