Self-assembly of the shower cabin. Shower cabin assembly instructions. What to do after assembly

For those who are interested in how to assemble a shower cabin with their own hands and are going to do it, nothing is impossible, because in such matters the main desire is. Each shower cubicle comes with detailed instructions on the assembly, following which you can successfully assemble it yourself. There are some secrets and subtleties that are not included in the instructions, but still they need to be known to those who are going to do this slightly troublesome business.

How to assemble a shower cabin: basic parts and tools

How to assemble a shower cabin - tools

To understand how to assemble a shower cabin, you should first understand what it consists of. So, the shower includes:

• bottoms;
• side transparent parts;
• top roof;
• doors that move apart;
• door guides;
• racks;
• apron.

For those owners who are thinking about how to assemble a shower cabin themselves, it is advisable to have the following set of tools and fixtures on hand:

• a set of various screwdrivers;
• electric drill;
• level used in construction;
• gloves;
• spanners;
• sealant, preferably silicone;
• mounting tool in the form of a miniature jackhammer;
• fluoroplastic sealing material;
• self-tapping screws;
• flexible hoses;
• sharp knife;
• siphon.

Shower tray assembly

Any instruction on how to assemble a shower cabin in all company passports begins with detailed description correct bottom settings.

Before assembling the pallet, it is advisable to cover the place future assembly so as not to damage the surface. It is advisable to wear gloves so as not to damage your hands and call an assistant, as it is more convenient to assemble the shower together.

How to assemble a shower cabin? Screw down the drain system and start collecting the pallet. Next, take care of the legs, which are usually 4 pieces in a set. In two places, screw multi-faceted metal dies with washers onto the studs.

Attach the studs to the special holes in the bottom. You need to screw in the leg only with the side to the end of which there is a multi-faceted metal die. Attach the center leg to the frame support. Tighten the nuts of all the legs so that they are on the same straight line.

Next, use cantilever supports, spacers, and fasteners to connect the splashback to the pallet to give it an aesthetic look. This is done using three legs, which are then adjustable.

Assembly of panels and glass barriers

As soon as you decide to assemble a shower cabin, namely to attach panels and a glass barrier, the main thing is not to confuse the top and bottom. After all, the guides from below are thinner and have different cutouts.

From below and from above, connect the rails to the rack. Put the material on the glass for a closer connection along the contour, but so far apply the sealant only to the bottom of the pan. Install glass panels, fixing them with screws and washers. To prevent moisture from seeping in, do not forget to treat them with a sealant.

Attention! Just do not try to seal the hole for water drainage with sealant, and tighten the screws too tight.

Assembling the side and center panels of the shower enclosure

It doesn't matter what you are looking for - how to assemble a 90 by 90 square shower enclosure or its rounded corner prototype. Remember that now comes the most difficult stage of installation - glass work.

Unpack the glasses, and mark for yourself where the top and bottom parts are. There should be many holes on the bottom of the glass. Do the same with guides. Remember that the bottom one should be much thinner and have cutouts.

Apply sealant to the places where the glass will connect to the posts, tighten the screws and put on the seal.

Side and central panels are mounted in the same way absolutely for all manufacturers of shower cabins. Therefore, for those who are interested in how to assemble a Serena shower cabin, we can confidently assure you that it is exactly the same as shower cabins from other manufacturers.

Place the panels on the pallet. Attach the sidewalls to the central part in turn. Using screws, also attach the door frame. Put the roof on top of the cab and twist its back wall with screws.

How to assemble a shower room: hang the doors

In total, the door frame of any shower cabin has four profiles. Silicone stops must be installed on top and bottom of the frame. Then they attach the rollers, with the help of which the doors will easily ride along the grooves. Lastly, tighten the rollers on the upper grooves to level the doors.

Be sure to use plugs when screwing in the roller screws.

How to avoid mistakes when assembling a shower enclosure

To learn how to assemble a shower cabin with your own hands, watch the instructional video, where they will prompt you and show you how the installation takes place.

But the following tips will tell you how to assemble a serena shower cabin and avoid mistakes:

1. It is advisable to buy a shower cabin with the maximum configuration.
2. Cast iron pallets are considered the most reliable and inexpensive.
3. Before installing a shower cabin, take care of the plumbing of the water and sewer pipes.
4. Take care of the correct tilt of the pan, otherwise the water will stagnate - which is highly undesirable.
5. If the cabin is with lighting or an audio player, then make sure that there is a socket not far from it, into which moisture should in no way get into.
6. Use silicone sealant as it is more durable.
7. If you are going to mount a shower for the first time, then first practice on free space in the living room. The second time it will be much easier and faster to assemble, and during the first assembly you will make sure that all the necessary parts are available.

If you keep these pretty simple rules, then you will have a great chance to install a shower cabin yourself and save on the services of installers, which in this case are quite expensive.

Shower cabins have long ceased to be a luxury. For today it best alternative standard pallet in apartments with small bathrooms, studios and small families. A variety of hydroboxes in plumbing stores allows everyone to choose a model that is suitable for cost and functionality.

But many owners, having learned how much it costs to assemble a shower cabin, prefer to do the assembly work with their own hands. If you are one of them, study our instructions, photos and videos in the article. With their help, you will be able to better understand the installation technology and correctly assemble a shower cabin of any design.

Types of shower cabins

There are two principles for classifying shower enclosures - by manufacturer and by type of construction (assembly method). With the first parameter, everything is simple. Chinese showers are cheaper European models, but inferior to them in quality. It is not easy to assemble a Chinese shower cabin, and not because of the complexity of the design, but because of a lack of parts or lack of available instruction. European shower enclosures are better suited for do-it-yourself assembly.

According to the type of construction, all models of shower cabins can be divided into two categories. For their comparison, look at the photo. The first are designed for installation close to two walls and consist of a triangular pallet and doors. They are called corner cabins or simply a shower corner. You can see an example of this design in the photo. The installation of such models requires preliminary work on leveling and waterproofing the walls and removing angles of 90⁰. Otherwise, the operation of the corner shower cabin may cause inconvenience.

Hydroboxes of the second type are easier to assemble - they do not require any planes for installation, except for the floor. These are rectangular shower enclosures, which can be assembled anywhere in the bathroom. Look at the photo - even a Chinese shower of this type makes the interior of the bathroom much better.

Before installing it, you will only need to level the floor plane. These models are undemanding to walls and corners. The only condition is that for ease of installation and subsequent operation of such a shower cabin, try to leave a distance of about half a meter between the pallet and other objects in the bathroom before assembly.

Required Tools

To assemble a shower cabin with your own hands, you will need not only the cabin itself, a pallet and installation instructions, but also a set of some tools.

• Building level - for leveling the pallet.
• Sharp stationery or construction knife.
• Crosshead screwdriver.
• Wrench.

Of the additional materials for the installation of a shower cabin with your own hands, you will need to purchase, collect in one place:

• good quality siphon;
• washers M16;
• sealant (preferably silicone);
• cotton and latex gloves (the latter are useful for assembling glass shower doors).

Components

Most simple models shower cabins consist of a tray, glass or plastic doors with a frame of guides and a faucet with a shower head. The roof and wall panels are not always included in the assembly kit (this applies to both Chinese shower enclosures and European models). The reason is that the walls of the bathroom can be used as a frame to install a corner shower enclosure. You can assemble the hydrobox without a pallet, as in the photo below.

Before assembling the shower cabin with your own hands, make sure that the assembly kit contains all necessary details frame and additional devices. Their list, as a rule, is given in the instructions in the format of a list or a set of photos. It is advisable to do this in the store or when delivering a shower cabin. In case of a shortage, the assembly and installation work will take you a lot of time and effort, so it’s better to play it safe in advance.

Step by step assembly instructions

To understand how to properly assemble a shower cabin, the photo instructions attached to it are not always enough. For information on some of the nuances of work, it is better to study several videos and photo guides for assembling your particular model. We will tell you how the shower cabin with a tray is installed in the general case.

Even before buying, it is advisable to correlate the dimensions of the frame of the selected model of the shower cabin and its tray with the dimensions of the bathroom. The height of the structure, including the podium for the pallet, should be 25-30 cm less than the height of the room. Do not be guided by the photos in the catalogs and video advertising! The dimensions of the shower cabin are best evaluated live in the store.

If the model you have chosen requires an electrical connection, check that there is a waterproof outlet near the installation site. It is best to draw before installation detailed plan assembly work, having calculated the dimensions of the bathroom, podium, tray and frame of the shower cabin in it.

Before carrying out installation on site, assemble the shower enclosure in free space - in a room or hall. This will help you understand the assembly instructions and make final installation easier. In the course of work on pre-assembly do not use sealant for the pallet and doors, do not fully tighten the bolts that hold the frame together. Pre-installation It will also allow you to assess the need to assemble some structural elements in advance, before you finally assemble the shower cabin at the installation site.

Assembling vertical shower cabins on a monolithic frame takes a minimum of time, even if you have never tried to assemble them yourself before. From the photo below it is clear that the entire installation consists in installing the tray and shower cabin in the right place, assembling the siphon and connecting it to the sewer.

But before assembling a Chinese shower cabin, it is necessary to make a rough installation of the frame. Most of the Chinese models sin with incompleteness, inconsistency of the instructions and mismatch of the communication holes with the attached photo assembly diagram. Pre-installation will help identify possible flaws in the assembly of the Chinese design and make new holes in the right places with a screwdriver or drill.

Work on the installation of a shower cabin begins with the installation of a pallet. Remove the apron from the pallet and screw the legs, leveling them. Next screw to drain hole pallet hose, the other end of which lead into the sewer. At the final installation of the pallet, use good quality gaskets to seal the drain. Additionally, it is better to treat all joints with sealant, as shown in the photo. The reliability of the design can be checked with your own hands by pouring several buckets of water into the drain. If no leaks are found, you can proceed to further work by assembly.

Tip: You can refuse to use a pallet, this will reduce the cost of the structure. If your bathroom has a floor slope towards the drain, you can assemble a shower cabin without a tray, right on the floor. With this method of installation, do not forget to seal the junction of the shower cabin frame and the floor. See how it looks in the photo.

If you have already tried to assemble a shower cabin with your own hands in an open space, there should be no problems with the final installation. Carry out the assembly work in the same way - assemble the frame of the roller mechanism, put the shutters on it and attach the resulting structure to the shower panel. If the model suggests the presence of electricians, it is worth assembling it separately and checking its operation before final installation, especially if it is a Chinese shower cabin.

Carefully place the finished frame on the pallet. This work is best done with an assistant, so as not to damage the tray and shower. Seal the joints between the frame and the door leaf guides with sealant, and only after that begin the installation of the roof. When assembling it, also do not forget about the sealant, especially if the design involves the presence of a backlight, a fan or other electrical appliances. The installation is completed by the installation of rubber seals on the doors of the shower cabin and the canopy of these doors on the frame.

The next stage of work is the assembly and connection of the drainage system for the pallet. Here it is important to keep in mind that even bundled with models with high price there are unreliable Chinese clamps, which should not be used during installation. And if you want to properly assemble Chinese cabin These parts definitely need to be replaced. Clamps are not that expensive, so it's better not to risk the result of the assembly and buy quality models. Anyway, by deciding to assemble the shower cabin with your own hands, you have already saved a lot.

To make sure that the installation is carried out correctly, after assembly, check the shower enclosure. Right and straight installed pallet should not creak and wiggle when you stand in it. If squeaks are observed, adjust the height of the legs of the structure again. Turn on the water, check that the shower tray drain is not leaking. If no complaints are found, the assembly work can be considered completed. It remains only to assemble the pallet, putting an apron on it, and you can use the shower cabin!

How to assemble a corner cabin: video

Corner showers, with or without a tray, are most often chosen by owners of small bathrooms. This design after assembly takes up very little space - check out the example in the photo! Attractive and the price of these structures - corner models can be called budget option. However, for the correct installation of such a shower cabin, it is necessary to clearly maintain the angular distance of the walls. Approximate scheme for assembly corner cab with a pallet is shown in the photo below.

The frame of any corner cabin, even made in China, is very rigid. If the walls are not even enough, gaps will remain around the shower stall and tray during installation. Many owners who first decide to assemble a shower cabin with their own hands decide to get around this problem by strongly attracting the frame profile to the wall.

Do not attempt to assemble the product in this way! This action will lead to deformation of the frame, and further installation of the shower cabin will become impossible. In the photo below you can see what these assembly methods lead to.

You will learn how to assemble a corner shower cabin with a tray and properly prepare the place for its installation from the video.

Rectangular cab assembly

Unlike corner cabins, the price of rectangular models and their assembly can be quite high. But they look luxurious - take a look at the photo of a rectangular shower in the interior. Do-it-yourself assembly of such structures should be approached especially carefully so as not to spoil the pallet, frame and expensive equipment. Despite the apparent simplicity of the shower cabin, it is better to carefully study the manual attached to it and see a few photos of the master classes.

The design feature of a rectangular shower cabin is that each of its walls is responsible for a specific function. First of all, it is necessary to install a panel with plumbing fixtures on the pallet. Install the remaining parts of the frame only after assembling and checking all communications. As for the installation technology of the pallet itself, it is standard and does not differ in any way from the installation of this part in a corner cabin.

During the assembly process, do not forget to seal all possible joints. If your shower cabin model has a radio, its speaker should also be put on sealant to avoid unnecessary vibrations. At the end of the installation, do not forget to test the shower cabin, check the evenness of the installation of the tray and the reliability of the drain.

Installing a shower cabin: video

Despite the fact that each shower cabin is accompanied by instructions from the manufacturer, it is quite difficult to figure out all the intricacies of installation with your own hands the first time on how to assemble it. And if you need to assemble a Chinese cabin, the complexity only increases - these models rarely boast detailed manuals with photos or drawings. To understand how to properly assemble and install this unit, watch our video review on this topic.

Job prices

Do-it-yourself installation of a shower cabin is a certain risk. If you have not tried to assemble any plumbing before and are afraid of damaging the equipment during assembly, the average price of which is about $ 1000, it is wiser to use the services of specialists. Assembling a hydrobox at home is usually offered when buying a shower cabin, but you can find a third-party master for assembly for installation.

The price for the installation of shower cabins depends on two points:

• the complexity of the design - in order to assemble a shower cabin open type the master will request a smaller fee than for the installation of closed models;
• the need for additional equipment - for the installation of water filters, meters and other devices that are not included in the shower cabin, the assembly master will ask for an additional fee.

The average prices for the assembly and installation of a shower cabin are shown in the table below.

As for the prices for additional components and their installation, they can be as follows.

Of course, it is more profitable to assemble a cheap shower cabin with your own hands. But if you have bought high-quality and expensive equipment, and do not have the skills to work with it, it is better not to be afraid of prices and ask professionals to assemble the hydrobox.

Manufacturers of shower cabins strive to assemble their products unlike their counterparts. This applies both to the design features of the cab and pallet, and to the nuances of installation. Let's look at examples of the most popular models of shower cabins and the subtleties of their installation.

Cabin Serena

When assembling the Serena shower cabin shown in the photo, a poorly written manual from the manufacturer delivers a lot of trouble. If you decide to do the installation yourself, be guided by the assembly diagram closed cabins, but with some amendments. So, you need to assemble the rear walls of this model using brackets attached to bearing wall. It is not recommended to use self-tapping screws that come with the cabin, it is better to replace them with better fasteners.

Cabin Niagara

It is easy to assemble the Niagara shower cabin shown in the photo standard scheme. For the reliability of this design, reinforced sealing of the joints is required. Rubber seals supplied may not provide sufficient fit. Cabins of this model can only work correctly if there is sufficient pressure in the system. Therefore, it is not enough to assemble them with high quality, you still need to provide good pressure.

The model shown in the photo, like all cabins of this line, is very sensitive to the mounting surface. The slightest unevenness or distortion of the frame will lead to the fact that it will not be possible to assemble the cabin doors evenly.

Cabin Luxus 530

When assembling the hydromassage cabin Luxus 530, pay attention to the system for connecting fittings. Since the design includes many different modes work, it is very important to properly organize the water supply and install the connecting pipes exactly according to the technology.

Nowadays, a shower cabin is not only an element of the bathroom, but also a functional and necessary thing. Assembling it with your own hands is not so difficult and will take only a few hours.

In contact with

Classmates

Basic equipment of a hydrobox (shower cabin)

Note that a variety of structural elements are offered for different shower cabins. Below is a complete set of a shower of an average price category. That is, in cheaper cabins some elements will be missing, in expensive cabins, respectively, there will be large quantity parts and functions. But in principle, the assembly scheme of all models is relatively similar. Therefore, we proceed to familiarize ourselves with the basic parts of the corner hydrobox:
- Shower tray

- Top panel (ceiling)

— Sliding doors(or one door)

- L-shaped rear panel (in cheap models, this role is played by the walls of the room)

- Guides for doors

- vertical racks

- Apron or pallet skirt.

What is needed for installation?

From the tools, stock up on a level (at least 50 cm), adjustable and wrenches, drill and drills of small diameters, screwdrivers.

The kit includes the necessary fasteners and accessories.

List of materials to be purchased:
Antibacterial silicone along with gun (buy clear base).
Tow or fumka (materials for plumbing units)
Adapter for sewer pipe(preferably from flexible material).
You may need several.

Step 1. Checking the model for integrity

Before the main stages of cabin assembly, be sure to lay out all the elements of the shower and check for quantitative matches in the instructions (should always be!). Carefully inspect all panels, doors for scratches or cracks. If you find any defects, shortcomings - return the goods to the store. You are entitled to it.
There are many examples of such a procedure. For example, one man bought a toilet, installed it according to the instructions, and only after a few days of use did a leak appear in the ceramic itself. Turned out to be a factory defect. Plumbing was changed in a construction hypermarket immediately to a similar one, and they checked it there. Therefore, do not be afraid to return to the store if there is a good reason for this.

Pallet assembly

Step 2. Assembling the pallet

Take out the pallet, frame, apron and other small components. Remove the film and place the pallet on a cardboard sheet to avoid damage to the product. Now you need to assemble the frame according to the principle of the designer. If the frame is assembled, we attach it to the base of the booth.
Take the legs (10 - 12 mm) and screw the nuts with washers onto them. Next, we string the frame onto the pallet, securely tighten the nuts on top. The quality of the work done is checked by the absence of a gap between the frame and the cabin base.
Tighten the nuts with a wrench or adjustable wrench. Start with the top nuts, pressing the structure against the pallet, and then the bottom ones. Be careful when tightening the nuts, as the frame is not thick and can flex, causing the cab to become unstable.
Next, from all the fragments, select the hardware (), which are suitable for the final fixation of the frame to the pallet. They are determined by the number of holes and length. (Length = frame profile height + 5 mm). With these screws we fix the frame on the mounting points.
Take out the cabin apron and brackets for fastening to the top of the cabin base, remove the film. The necessary brackets (they are similar in shape to a question mark) are screwed onto the mortgages with 2 screws.
Next, we screw the nuts and put the washers on the legs, which are installed on the front of the pallet. From above we pass the black holders in the form of “G”, again we fix it with washers and nuts. Now adjust the fit of the apron to the holders. Mount the siphon to the base of the shower cabin.

Frame assembly process

Step 3. Assembly of the top panel (ceiling)

At this stage, difficulties should not arise. Print the top panel, then remove protective film. We install the necessary parts on the "roof": lamp, speaker, radio, rain shower, cooler and decorative covers (sets of these elements may be different, or not at all).

Step 4. Assembly of the frame and panels

To assemble the frame of the shower cabin, we need 2 semicircular profiles and 2 vertical, 8 screws. Having found all the details, we assemble the door frame.
Be careful! To correctly assemble the door frame, it is necessary to determine the top and bottom on the profiles. On semicircular structures there should be inscriptions "UP" - top, "Down" - bottom. On straight profiles, there is a rectangular cutout at the bottom.
Also, don't forget to insert rubber stops on the semi-circular panels where the door wheels drive.

Step 5. Installing all panels on the pallet

Assemble and install the disassembled shower back panels necessary elements.
Now we move on to installing all the panels on the pallet. Install all panels one by one (there can be from 2 to 5 depending on the booth model) on the pallet without screwing. Inspect the borders and horizontal joints for cracks and irregularities.
All elements must clearly and tightly fit one to one, otherwise the shower will be leaky and lose its attractiveness. After connecting all the panels and fixing them confidently, screw them to the profile frame of the shower.
After installing the walls of the shower, carefully place the "roof" up. Screw the ceiling with 4 screws. The procedure for assembling the shower cabin does not provide for additional fastening of the ceiling on a semicircular profile. Often this is necessary, as the roof will hang out. If the cabin frame is tight enough, make a couple of small holes and screw the ceiling with self-tapping screws.
We're heading to the finish line. We place the upper structure of the hydrobox on the pallet, carefully moving it over the surface. Fix the cabin in the desired position with self-tapping screws.
Now take a walk silicone adhesive at seams and gaps that can serve as a way for water to flow.

Installed shower cabin

Step 6. Mounting the doors

First, install the front glass panels (if any) with cilia. Put the seals on the glass in advance and move the glass to the pass on the shower frame.
Before installing the doors, screw the roller mechanism to them. Insert the doors into the cabin frame and adjust them by performing various manipulations (close and open). Having defined correct position doors in space, tighten the screws on the rollers with inside cabins at closed doors.

Step 7. Connecting the hydrobox

The final stage of our work will be the connection of the shower cabin to communications. Connect the hot and cold water to the booth, connect the siphon to the sewer. Carry out several tests by pouring several buckets of water. If there is no leak anywhere, the shower is ready for use. Here, screw the apron of the pallet and move the hydrobox into place.

Assembling a shower cabin with your own hands - the pros and cons

Without using the services of plumbing installation specialists, you save a significant amount in your budget on shower installation. Self-installation and the instructions below guarantee that work with the shower will be done efficiently and reliably. Another plus will be the acquired knowledge and skills that will be 100% useful in the future.
The obvious disadvantage for some will be the time spent. Assembling a shower stall for the first time takes about 1 day. You will also need a certain number of tools, and in their absence, the installation process is difficult.

Video instruction:

In contact with

See inaccuracies, incomplete or incorrect information? Do you know how to make an article better?

Would you like to suggest photos for publication on a topic?

Please help us make the site better! Leave a message and your contacts in the comments - we will contact you and together we will make the publication better!

A modern person is used to rationalizing everything around him: he saves time, saves space, and reduces resource consumption. Therefore, the usual bathrooms are being replaced by functional and pragmatic shower cabins, which allow to reduce water consumption, and also take up a lot of space. less space in the bathroom.

This plumbing novelty has already firmly entered our lives, but it has not yet become commonplace, so many homeowners are afraid to install it on their own. Already unsure of their abilities, they often succumb to the persuasion of the seller and order an expensive installation.

However, in fact, the manufacturers made sure that even an amateur could cope with this task, provided that the right tool and materials. In this article we will tell you how to assemble a shower cabin with your own hands without the help of a master.

What is a shower cabin?

Shower cabin - this modern plumbing device, which is a pallet, closed on three sides with walls and a door, equipped with a mixer and a shower . This device, unlike a bath, allows you to wash only while standing, in extreme cases, sitting, if the pan is deep enough.

Recently, showers have been increasing the number of their users, catching up with traditional baths in this indicator. The reason for this are the following advantages of the cabins:

Please note! A shower cabin, in addition to the main function, often has additional functions: hydromassage, built-in audio system, lighting. All this adds to the complexity of the installation. plumbing equipment several times. Often self assembly a shower cabin can only be performed if the selected model has a minimum of "bells and whistles".

Types of showers

Modern range plumbing fixtures large enough, so you can choose a model for every taste and budget. However, when buying, it is important to consider not only the aesthetic qualities and variety of functions, but also how the shower enclosure is assembled. Conventionally, booth models are divided into the following types:

Important! Typically, the size of the shower tray is 100 cm by 100 cm. If the model is sold assembled, then it will not fit into the doorway of the bathroom, which is usually only 60 cm wide. Not to break the wall and door frame, do-it-yourself installation of a shower cabin right on the spot.

Major installation difficulties

Included with each model of sanitary equipment is an instruction for assembling a shower cabin. The instruction describes in detail, step by step, the process of assembling the device, but often is silent about the difficulties that an inexperienced master may encounter.

Taking on the installation of the booth, you need to be prepared for the following nuances:

Remember that to connect shower enclosure models with additional features(lighting, hydromassage, audio system) you will need the skills of not only plumbing, but also an electrician. Experts say that if plumbing work you can save money, then it is better to entrust the electrical part of the installation to a professional, because electricity, and even in a humid room, is very dangerous.

What is required for self-assembly?

Before assembling a shower enclosure, you need to make sure that you have everything you need that will come in handy during installation. It is better to prepare all materials and tools in advance so that they are at hand. So, to complete the work you will need the following materials:

• Shower cabin assembly or separate tray and shower walls.
• Compact plumbing siphon with flexible connection.
• Elbow type.
• Silicone moisture resistant sealant.
• Mild detergent.
• Clean rag.

All the tools with which the shower cabin is assembled are usually available in the householder's arsenal. To do the job you will need:

1. Spanners.
2. Phillips screwdriver.
3. Electric drill.
4. Electric jigsaw.
5. Proven building level.
6. Roulette or ruler.
7. Adjustable plumbing wrench.
8. Sharp knife.

Remember! Before starting work, the installation instructions for the device are carefully studied, everything is prepared necessary tools and materials. Also, before installation, experienced plumbers recommend checking laser level the evenness of the floor in the bathroom, as well as change the pipes to modern plastic ones.

Pallet assembly

Before installing a shower enclosure, you need to carefully check with building level flatness of the floor in the bathroom. If small deviations within 1-2 centimeters can still be compensated for by the height of the legs, then large fluctuations will cause the pallet to stand unstable.

The build is then done like this:

Important! After completing the work, you need to check again that the assembled shower tray is installed absolutely level. If the check showed that it was installed crookedly, then you need to adjust the height of the legs again. If everything is in order, then you need to connect a siphon to the drain hole of the pan. When assembling the siphon, it is important not to forget to use a sealant and silicone sealant to protect the joints from leakage.

Side wall assembly

The walls of the booth are usually made of glass or fiberglass, they are fragile and large enough, so it is more convenient to install them with two people. The main difficulty of this operation is that the models of showers are very different, so only the instructions will help determine the exact sequence of actions.

Wizards usually work in the following way:

Before starting the operation of a do-it-yourself shower stall, you need to check it for leaks, as well as for the correct connection of all communications. If the appliance is installed correctly, no water should leak from the drip tray or seep between the panels when the doors are tightly closed.

Video instruction

Reading time ≈ 9 minutes

From this article you will learn how to install a shower cabin with your own hands in an apartment or private house. I want to immediately draw your attention to the difference between the cabin and boxing - many ordinary people believe that this is one and the same thing, but this is not so. The cabin is attached to the wall, finished ceramic tiles and on both sides its inner part turns out to be ceramic, and the box is autonomous and does not need to be attached to the wall, except perhaps for rigidity during operation.

Advantages and disadvantages of shower cabins

Quadrangular model with a low tray

Such plumbing units are very easy to use and take up little space, but, alas, they are imperfect. However, you can compare the positive and negative qualities to make your own decision.

What's in the arsenal of positive

Of the indisputable positive aspects of such a device, the following qualities can be distinguished:

• ergonomics - most models take less square meter usable area. Thanks to this, such nodes can be mounted even in very small bathrooms;
• savings - the cost of water when washing is 3-5 times less than with a similar procedure in the bathroom;
• hygiene - running water washes away dirt and dust better than standing in one place;
• functionality - you can install a panel with hydromassage;
• placement - the small area of ​​\u200b\u200bthe device allows you to place it in any corner, if it is possible to connect to the sewer;
• availability - you can always put on a pallet plastic stool, and attach a handrail to the wall, which is very convenient for the disabled;
• security - acrylic pallets not slippery, but more modern models pallets are produced with anti-slip effect:
• cost - a shower is cheaper than a bath.

What's in the arsenal of negativity

As noted above, nothing is perfect, so you should pay attention to the cons:

• fragility - glass for bathrooms, as a rule, is made from a material with increased mechanical strength(tempered), but, nevertheless, glass remains glass;
• space - sometimes (especially for tall people) problems may arise due to lack of space, especially in small showers, for example, 80x80 cm;
• rest - lovers to soak up in hot water you will not be able to lie down, as in the bathroom, since such bathrooms are intended exclusively for washing.

What are showers

High tray model

Once again I want to remind you not to confuse a shower cabin with a shower box that can function right in the center of the room - the main thing is to bring water and sewage. The cabin, on the other hand, is dependent on the wall, since it only has movable doors and fixed curtains in front, located on profile mounts, and two back walls stationary and are tiles on the bathroom wall. Below you can watch a video clip showing both boxes and cabins (the differences are indicated in the text).

Video: Showers and boxes

Let's start from the bottom - there are models with a high and low pallet. The first option is a mini bath, which the manufacturer usually supplies with a bottom valve. This is very convenient for families with small children - the child will splash and splash, and at this time the mother will be able to watch him through the transparent door. There is a double benefit here - and the child will enjoy, and the floor will remain dry.

square pallet

Pallets vary in shape and can be rectangular and square, as well as triangular. Last option purely angular and is in the greatest demand, besides, the triangle can be either isosceles (80 × 80 cm, 100 × 100 cm) or versatile (80 × 100 cm, 90 × 120 cm), while the dimensions may be different. Pallets also differ in the material from which they are made: acrylic (the most popular), steel, cast iron, cast marble and fake diamond(the last two refer to composites).

Note. In the shower, you can also connect a wall-mounted hydromassage, but nothing more. If you hear that the kit also has flavors, a Turkish bath and the like, then this already applies to the hydrobox.

With frosted glass

At present, of course, this is a rarity, but if desired, frosted glass can still be found. Their advantage is that this is a family, not an erotic option. That is, children can freely go to the bathroom when their parents are washing there and this will not create any inconvenience. Also, young people can live with elderly parents, and then transparent doors are also useless.

Stages of assembly and installation of a shower cabin

The installation work of bathrooms of this type consists of several stages, which are simply impossible to bypass or skip. But you should not immediately give up self installation- if you want, you can do it.

Water and sewerage

Sewerage supply

To install such a bathroom, you need good drain and for this floor the pallet is brought down by a 50 mm sewer pipe. The photo above shows that a tee with a 45⁰ outlet is embedded in this pipe - this is for the siphon of the pallet, and on the left edge a 90⁰ corner is for a sink or washing machine. Of course, it is best when the sewer is completely recessed into the floor, but this is not always possible and open areas close, which is then tiled.

After laying the tiles, there will be a mixer here

A shower cabin cannot be installed after a bathroom renovation, unless a separate place has been prepared for it. The thing is that you need to connect hot and cold water to the mixer, which simply cannot be done on top of the tile, since the glass guides and the pan are closely adjacent to the wall (tile). Therefore, when plumbing is done, the fittings for the shower faucet are brought in in advance, as shown in the photo above.

Complete with a mixer, eccentrics are sold, with which you can level the horizontal level and the distance between them by 1-3 mm. But still, it's better to endure correct distance between fittings even when hot and cold water is supplied. This is 150 mm between the centers, as on the Americans of the mixer itself. Optimal Height crane 1 m from the finished floor - from the pallet you get about 80-85 cm.

Advice. Before installing the shower stall, it is better not to install the mixer, so as not to accidentally damage it. Simply put male plugs on the fittings temporarily.

Assembly and installation

In this case, the concepts of assembly and installation are intertwined, since the assembly process occurs in parallel with the installation.

The passport often has part numbering.

As a rule, the assembly and installation of a shower enclosure begins with reading a detailed step by step instructions, which is in the passport (almost all manufacturers leave it). It should be noted that in some documents in this manual everything small parts are numbered and the same numbers are on the bags, so it is very difficult to confuse them, except with intent.

We fasten the legs

On the underside of the pallet there are special threaded grooves for assembling the legs. The legs themselves are studs, on which three lock nuts are screwed - one fixes the leg at the pallet and two clamp the cross. The number of legs, as a rule, depends on the area of ​​\u200b\u200bthe cabin to be installed - the larger it is, the more reference points are involved. Plastic support heels are screwed onto the ends of the studs, which, in addition to the supporting function, can serve as regulators for leveling horizontally by screwing in and out.

Installing the siphon pipe

Further, installing a shower cabin with your own hands involves screwing the pipe from the siphon to drain. There are gaskets on both sides, but on the underside it is best to put it on silicone (only ordinary white silicone, not sealant). The remaining parts of the siphon (water seal and corrugation) can also be installed at this stage.

Mounting the decorative cover

Attaching the decorative cover is very easy - it has special mounting holes, and on the side of the pallet there are threaded seats for fixing screws. When the assembly is ready, you can put it in a corner and see if there are any gaps. This default angle should be 90⁰, but if there are small gaps (up to 3 mm), then this is not a problem - they can be sealed with silicone. But the pallet itself, if the fitting was successful, should also be glued to the wall with a sealant so that there are no leaks when the water flows down the tile.

Important! Before gluing the pallet to the tile, do not forget to connect to the sewer!

Glass frame assembled separately

Unpack the box with profiles for the frame and guides - there are four straight profiles and two arcuate ones. Assemble the glass frame separately from the pallet, as in the photo above.

Attach the assembled frame to its future fixation place and level it. Check vertical racks pencil for guide profile guides. Then, along the control lines, press the guide against the wall, mark the places for drilling through the mounting holes, carefully drill the tile and insert the dowels.

Be sure to ask for guides

Be sure to ask to remove the guides from back side before screwing them to the wall. No matter how perfectly the tile is laid, water will still break through between it and the profile without additional insulation.

And now in different models actions may vary. That is, fixed windows are sometimes installed on assembled frame, and sometimes you have to remove the upper arcuate profile, put glass and press them. Before installing the frame on the pallet, make a silicone seal under the lower arcuate profile.

Cabin assembly

Screw the frame to the rails, hang the doors, put magnetic seals on them and attach the handles.

Video: Cabin assembly

Conclusion

Do-it-yourself installation of a shower cabin is carried out even without the help of another person, since all elements are light and easy to install. Dare, and you will succeed!