Wall plug. Cork wall decoration. Step by step instructions for finishing

Wall cork coverings designed for residential and commercial premises, used for full or partial wall decoration, as well as for decorating furniture and interior elements, for example, niches or surfaces behind the TV. The cork is placed on the contact adhesive, it is necessary preliminary preparation grounds, and finishing acrylic, ceramic or water-based varnish.

In our showroom you can buy wall cork in plates from leading European manufacturers: Corkstyle, Corksribas, CorkArt, Wicanders, IberCork, Maestro. We offer cork flooring affordable prices and with an official guarantee; we deliver orders the next day after registration in all districts of Moscow and settlements Moscow region.

Benefits of cork walls

• Appearance. Cork wall coverings look natural and original, in harmony with both classic and modern interiors.
• Environmental friendliness. Cork oak bark, which serves as raw material for wall plug— renewable resource; no artificial or unhealthy components are used in the production of coatings.
• Soundproofing and keeping warm. Cork consists of air-filled pores - an ideal natural insulator that prevents the penetration of noise and retains heat in the room.
• 100% moisture resistant. After laying, the cork wall turns into a monolith that does not gain moisture and is resistant to temperature extremes.
• Wear resistance and maintainability. Mechanical damage, scratches, cuts, punctures - cork wall coverings are wear-resistant, and the resulting damage can be easily repaired by replacing the cork fragment.
• Hypoallergenic and fireproof. The wall cork is refractory, there are no substances in the composition that can cause allergic reactions; rotting or development of microbes is excluded.

In the salon "Polov" you can also order professional in Moscow and the Moscow region.

Types of cork for walls

Cork panels. Convenient format - square tiles 300x300 mm or rectangular panels 300x600 mm. Thickness, depending on the model - 3-4 mm. Single-layer coatings are produced by pressing granular cork. To obtain two-layer panels, a cork agglomerate is glued onto the pressing. Service life - 15-30 years.

Cork wallpaper. A thin layer of veneer is applied to the paper base, leaving gaps in places. The total thickness is 1-2 mm. The preparation of the base is identical to the preparation for gluing conventional heavy wallpaper. Service life - 10 years.

Cork wall coverings in the interior

Choose cork walls with natural veneer in the specialized online store Cork-24. Experts work for you to select the best option, will give all the necessary advice, arrange delivery in Moscow and the regions of Russia.

Wall decor in a room is a way to make the environment comfortable and inviting. Wall decoration can be made from any material, the idea of ​​using cork for wall decoration is one of the best that can be offered. experienced designers. Wall cork is available in the form of wallpapers, tiles and abstract forms. Finishing the walls with cork coating will provide additional heat and sound insulation. As for decor, cork helps to create perfection in the interior, besides, the material itself is distinguished by environmental properties. And if ordinary plaster or other finishing material causes an unpleasant feeling of cold in contact with the body, then cork has a warm and pleasant to the touch texture.

Mounting the wall plug

The cork is easy to lay, with the help of special glue it is applied to any surface, without proper processing. Fixation occurs instantly and reliably, so installation requires special care. The structure and texture of the cork makes it possible to hide the unevenness of the wall, as well as become an ideal base for temporarily placing some exhibition compositions or paintings on it. There are practically no traces of pins or clerical carnations on the cork surface.

The effectiveness of the wall plug in operation

Any surface accumulates layers of dust pollution, with a cork coating, such things are different. Having an antistatic effect, the cork practically does not attract dust particles; a lot of inexpensive cleaners for the care of cork products are produced to remove contaminants. cork finish does not age over time years which protects against frequent costly repairs.

In our online store you can buy cork wall coverings of various formats: cork panels, cork roll wallpaper and cork wallpaper paper basis. The cost of cork wall covering depends on the format of the covering, as well as on the top decorative layer.

Create comfortable conditions work in a noisy office and at the same time a stylish interior is important for any company. Visitors are attracted by a comfortable room decorated beautifully. In the office, employees work productively, protected from loud extraneous sounds. Cork for walls meets all requirements. It retains heat, absorbs noise. On the walls modern panels look great.

Wall cork retains heat, absorbs noise

The structure of natural cork

Cork oak grows in Portugal and its surrounding countries. Its bark is characterized by a cellular structure and the ability to quickly restore the trunk cover after cutting.

The specifications of the cork are unique:

1. The cork is made up of small cells filled with gas.
2. It can be squeezed like a sponge and after being released it returns to its original form.
3. The bark does not absorb water and does not burn.
4. The high content of tannins does not give insects and rodents a chance to destroy it and eat it, like other types of wood and polystyrene.
5. Cork does not absorb odors and does not emit any substances.
6. The bark has a small specific gravity, can swim indefinitely.
7. Contains natural antistatic agents, repels dust and dirt.

The unique properties of cork have been appreciated in many areas. From reliable and sustainable wine closures to modern industry. Builders use it to create sound-absorbing partitions and ceilings. Designers create stylish interiors with wall decoration with cork materials.

The unique properties of cork have been appreciated in many areas

Types of cork materials for wall decoration

Manufacturers produce finishing materials from cork oak bark for all surfaces. For this wood material cut into plates and small chips. Then they are pressed. A decorative layer is created.

Depending on the base and thickness, the cork on the walls is made in the form of:

• plates;
• plates;
• wallpaper;
• textiles.

Manufacturers produce finishing materials from cork oak bark for all surfaces

For wall decoration, cork plates are mainly used. They have dimensions of 600x300 mm and a thickness of 3 mm. There are square 250 mm. Thickness can be more, 5 and 8 mm. The base is made from pressed cork shavings. decorative surface created from treated and waxed veneer. Paint may be added to the drawing. Spots of white or green color seem to appear through the layer of cork, creating an original pattern. It looks natural on the walls.
Plates have a thickness of 18 and 20 mm. They are lightweight and durable. Thick cork is glued to the walls mainly in special rooms that require high degree soundproofing.
Wallpaper without a paper base is called a roll cork. They are made of veneer with a decorative finish.
Textile is the application of a thin layer of cork on a fabric base. The material is warm and textured. Its characteristics are close to natural leather. It is widely used by furniture makers and decorators.

Designers create stylish interiors with cork wall decoration

Wall decoration with cork plates with wax and varnish coating

The most popular material for walls are cork plates. The thickness of the pressed sawdust oak bark 3 mm provides good thermal insulation. Top veneer coated with wax or varnish. The decorative surface does not react to water and repels dust. Drawings with a felt-tip pen and pencil are easily washed off from it. Cork products do not absorb odors, including tobacco and food.
Bark natural wood does not highlight harmful substances and fragrances. This makes her ideal material for children's rooms. The walls are always warm and pleasant. Cork plates are soft, with a large selection of patterns.
Unlike others finishing materials for walls, cork plates should be glued from the middle.

Manufacturers offer various options:

• vertical arrangement of plates with observance of even lines of joints;
• horizontal arrangement with an offset of half the length of the plate.

The most popular material for walls are cork plates.

To finish the wall with your own hands, you need to find its center and draw a strictly horizontal and vertical line through it. This is done using a level and a plumb line. Then the first two plates are glued above the horizontal mark, to the right and left of the center.
The third cork plate with a horizontal arrangement is located under the first, strictly in the middle along the junction line - the axis. At vertical version to the right and left of the center line below the first two.
Glue is used specifically for cork surfaces. It is applied to the wall and the back side of the plates. It is aged for 20 minutes and then glued to the wall. It is necessary to carefully align the first sheets according to the markup. The rest of the ends fit snugly to those fixed on the plane. The work must be done quickly, because the glue sets in a few seconds.
Air is expelled from the middle to the edges as in ordinary wallpaper. Then the joints are tapped with a rubber mallet. After that, a monolithic surface is formed.

Patterned cork and laminate

Cork slabs are different big thick and basis on back side. They stick like tiles. It is difficult to make wall decoration on your own, you need work skills, special glue and cutting equipment. The decorative layer has a pattern. On the expensive models applied 3D drawing.
Craftsmen who want to make their apartment original have adapted to decorate the walls with floor cork laminate. The boards are interconnected with locks and glued to the wall.
It is more difficult to fix the floorboard firmly on a vertical surface. Cork material is designed for decoration and looks great on the walls. It's hard to attach it. It is important to choose the right glue and prepare the wall. These are done by professional teams.

Cork slabs are very thick and have a base on the back side.

Wallpaper from cork chips and veneer

Thin veneer up to a millimeter thick is applied to the paper base. This finish does not retain the basic properties of cork due to the small size of the layer. Positive moments in the beautiful texture of the bark and the warm surface of the walls, pleasant to the touch. The width of the strips is mainly 760 mm, the length is within 5500 mm.
Roll cork is made of pressed chips and covered with decorative veneer. It has a thickness of 2 and 3 mm with a width of 500 mm and a standard length of 8 meters. Butt glued using heavy technology vinyl wallpaper. The surface of the wall and cork cloth is smeared. Great importance has a properly selected adhesive and compliance with the exposure time before fixing the strip on the wall.

Wallpaper from cork chips and veneer

Cork cloth and its application

Fabric with printed on it thin layer corks are called cork textiles. The warm, rough surface resembles leather and has similar characteristics to it. Furniture manufacturers were the first to use canvas as upholstery material.
Designers use beautiful fabric for wall decoration and interior decoration. The pleasant color and gentle warmth radiated by the cork turned out to be in demand in many modern styles, especially safari and colonial. From curtains with drapery in large waves, decor elements gradually switched to wall decoration around the entire perimeter of the room.
Wall decoration with cork textiles is performed similarly to covering with heavy fabric. The decorative veneer layer has various patterns and creates an original surface. It is used extremely rarely by lovers of expensive extraordinary solutions in the interior design of offices and living rooms.

A fabric with a thin layer of cork applied to it is called cork textile.

Features of gluing cork materials on the wall

When preparing the walls for gluing cork plates and wallpaper, the walls are leveled with putty. The skin is not rubbed. The textured surface of the cork veneer hides small roughness.
To improve adhesion, be sure to cover the wall with a primer. Possibly two layers. Don't skimp on glue. You need to buy a special one, for cork surfaces. The cellular structure of the material is demanding for adhesive compositions. Improper fixing of strips and tiles will lead to rapid peeling.

1. Bark cork tree- a material with unique performance characteristics. These include low thermal conductivity, high elasticity and strength of the material. It is an excellent material for floor, ceiling, wall covering. Cork wall decoration has a number of features. In our article, we will talk about them in detail.

2. There are several types cork material for walls. In the following, we will take a closer look at each of them.

— Cork wallpaper. They are a cut of cork tree bark glued to a paper or vinyl base. Such wallpaper is quite elastic material, it is easy to work with it.

Cork wallpaper

- Cork lining. This is a compressed cork crumb on a fabric basis. This material is usually not used in decorative purposes. But it is an excellent sound and thermal insulator, so it is used as technical coverage under wallpaper, cladding, etc.

Cork backing

- Cork tiles. It is produced in the form of a 30x30 cm or 60x60 cm tile. The tile is a cork crumb pressed and impregnated with glue. To improve performance, the tiles are treated with varnish or natural wax.

cork tiles

- cork panels. The most popular and demanded material. The panels are made up of two layers. The first is compressed cork chips. On top of the first layer is pasted the second - decorative. It is made of cork veneer (a thin layer of cork tree bark).

Cork panels.

Such material has not only wonderful performance characteristics but also of high aesthetic value. The cork wood veneer looks very nice. Often, panels are produced with a spike-groove locking system, which facilitates their installation.

Spray stopper

- Spray stopper. Enough new material. It is a mixture of cork crumbs with adhesive base. Such material can be applied to any clean and dry surface. Coloring and fire retardant substances are added to the mixture. This is an excellent material that not only keeps the room from moisture, cold, noise, but also from mold, insects and even electromagnetic radiation.

Types of wall cork material

3. We have already touched on the benefits of cork coating, let's note them again:

- Cork has high aesthetic characteristics. Without a doubt, well-designed wall covering cork will be a home decoration. This applies not only to veneer - which is one of the most aesthetic materials. Properly selected and painted cork chips will also look very harmonious in your home.

- porous structure cork provides high thermal and sound insulation. Even layer decorative cork in 2-8 mm. can seriously improve the comfort of your room. But, of course, this is decorative coating. It cannot fully provide the necessary insulation. It's just an extra "bonus".

- Strength and elasticity. Cork is able to restore its original shape, even after severe mechanical stress. True, we are talking about the impact on squeezing. Cork is very sensitive to rupture.

— Environmental friendliness. Cork covers are entirely made from environmentally friendly materials. Even adhesives and pigment additives are made from harmless materials that do not emit toxic substances. Therefore, such a coating can be installed in the children's room.

- Practicality. Cork is very easy to care for. In addition, it repels dust.

Disadvantages of Cork

4. Unfortunately, such a wonderful material has its drawbacks. If you decide to finish the walls with cork, you need to know about the disadvantages:

- Cork It is made from the bark of a cork tree, which is quite rare in nature. From here high price on the cork. Moreover, as the demand for cork coatings grows, so do prices.

- Cork- porous material. Despite the fact that it has antistatic properties, dirt still accumulates in the pores over time. It's almost impossible to get it out of there.

Uncoated cork absorbs moisture and odors. Such material is not recommended for use in the bathroom or in the kitchen. Varnishing, of course, protects the cork from these influences.

Cork installation technology

5. Installation of cork flooring begins with the preparation of the base. First you need to remove the old coating. Tap the walls for loose fragments of plaster, remove these fragments. Then, sandy cement mortar potholes and cracks need to be repaired. The next step is to level the walls. Cork, of course, masks the defects of the walls, but you should not leave differences in the plane of more than 1-2 mm.

When the walls are leveled and the putty has dried, we apply an acrylic-based primer. The primer is applied in two layers. This will ensure maximum adhesion of the coating and the wall. When the primer is dry, you can stick the cork. But first, let the material “rest” in the room for at least 12 hours. Otherwise, after installation, the cork may be deformed.

In our article, we talked about how to finish the walls with cork. On the main advantages and disadvantages of cork coating.

Cork wallpaper is becoming increasingly popular in the design modern interiors. Not surprising, because they are based natural material, which allows you to achieve the effect of rapprochement with nature.

"Cork" - this is how the cork oak bark is called in everyday life, main feature and the advantage of which is a rapidly recovering bark. They get it from 15-year-old trees, extracting it from the trunk once every 10 years, which is completely safe for the tree, moreover, it retains its properties for up to 200 years. A large-scale cork manufacturer is Portugal, less often produced in France, Italy, Spain, and northern Africa.

Advantages and disadvantages of cork wallpaper

Cork wallpapers are not limited to ecological properties only. In addition to the naturalness of the material, such canvases have a number of other advantages:

• amazing aesthetics, this is a great option for lovers of eco-style interiors;
• low thermal conductivity - the cork perfectly accumulates heat, while not blocking the cold from the outside;
• good sound insulation - the porosity of the material perfectly absorbs and scatters sound waves;

• regulation of humidity level - cork naturally regulates humidity, maintaining it at an optimal level for the human body;
• antistatic - the cork is electrically neutral, therefore it does not attract dust, always remaining clean;
• fire safety - despite the “woody” origin, the cork is completely non-flammable;

• durability - due to its porous structure, cork wallpapers are resistant to mechanical impact. In addition, they do not fade, do not lose color, even under intense sunlight;
• safety for the human body - the cork has antibacterial properties, is hypoallergenic, prevents the appearance and development of mold and fungus, even in conditions of high humidity;
• ease of care - such wallpapers are easy to clean, do not deform upon contact with water and household chemicals.

But besides the advantages, it is necessary to point out some disadvantages. cork wallpaper:

• price - the high cost of such canvases is perhaps their most important drawback. The highest price is for high quality Portuguese cork;
• odor absorption - the porous structure immediately absorbs and retains odor for a long time. Therefore, in rooms where persistent odors can appear, cork wallpapers should be coated with wax or varnish;

• difficulties with replacement - sticking other canvases over cork wallpaper will not work. They will have to be completely removed, which will be very difficult;
• such wallpapers cannot be repainted;
• pets - cork wallpapers and favorite pets - concepts incompatible with each other: the temptation to gnaw on cork or sharpen claws is very strong. Therefore, you will either have to abandon the cork, or place such a coating outside the animal access zone.

How to choose?

Cork wallpapers come in three types:

• paper-based - cork veneer is glued to the paper itself. The texture of such a coating is very diverse and expressive, with a wide palette - from light beige to dark ocher.

• without a base (rolled) - produced by hot pressing the crushed bark. The thickness of such a canvas is 2-2.5 mm;

• self-adhesive wallpaper - something between a rolled cork and cork wallpaper. It is enough just to remove the paper layer from the cork base, on which the adhesive composition is preliminarily applied, after which the walls can be pasted over. But keep in mind that such a finish is far from a guarantee of a durable and effective result.

Shades of sand, gold, brown and beige will add warmth to any room, making it conducive to rest and relaxation. This is what contributes to the frequent use of cork in country-style houses or ethnic design.

Dirt resistance and mechanical strength of such wallpaper causes a high demand for them for the design of commercial buildings with high traffic, halls, corridors, offices.

The use of cork wallpaper in the interior implies some restrictions in the choice of furniture. Even in combination with other coatings, cork creates a feeling of excess wood in the room. Therefore, in a room trimmed with cork linen, there should be as little as possible wooden furniture. Fine polished furniture in dark colors goes well with cork.

Tip: with synthetic things dyed cork cloths are optimally combined.

Despite the interesting texture and natural color, monotonous cork coating is quite boring. It is better to refresh it with areas tastefully decorated with other materials.

Note: when combined various kinds wallpaper, the main thing is that the difference is not noticeable. Therefore, in the case of cork cloths, it is necessary to select sufficiently thick varieties. If you can not hide the difference in thickness, you can use decorative moldings or docking materials.

Sticking

Before proceeding with gluing, the wallpaper must be unrolled and allowed to lie in the room for some time. It will be good to immediately cut them into strips and leave them under pressure for several days. Although the structure of cork sheets is quite heterogeneous, they do not hide wall defects well, so its surface must be even.

Cork wallpapers are “heavy” in their structure and density, therefore they require high-quality reliable glue, for example, acrylic.

• pasting the room is better to start from the corner. In general, processing the corner in this case is not an easy task. With a sharp or inaccurate bend of the cork cloth, it may crack;
• gluing cork wallpaper is necessary only in the joint;
• wallpapering with acrylic glue requires speed, so big chunks cork cloths are best handled together.

The process of gluing cork wallpaper involves the following steps:

1. Spread acrylic glue on a section of the wall, the same area as the glued piece of wallpaper. Spread the adhesive evenly with a comb.
2. Attach a piece of wallpaper to the surface so that there is no air inside, and press down.
3. Remove excess glue with a knife. Do not try to wash off the adhesive with water, as this will lead to the formation of white plaque. Therefore, let the excess dry, and then carefully scrape or cut it off.