Set up pandora alarm. How to enable and configure autostart on pandora alarms. New Pandora alarm models with auto start

The Pandora alarm appeared for the first time in 2004. Since then, according to users, it has been one of the best security systems in the domestic car market. The article discusses the main points regarding this device: peculiarities, the lineup, advantages and disadvantages. An instruction manual is provided.

[ Hide ]

Peculiarities

The main feature of the Pandora anti-theft system is the ability to auto start engine and programming the autorun function with the given parameters. In armed mode, certain zones are controlled. If there is any violation in one of the zones or a motion sensor is triggered, the system automatically goes into alarm mode. A message is sent to the key fob about all detected malfunctions.

Types and models

Pandora car alarms are produced in a wide range to cover both budget cars and premium vehicles. However, all models have necessary set functions.

deluxe

The model is one of the best due to its advantages:

the strong body of the key fob protects against mechanical damage and accidental drops;
multiple channels are used to control from the key fob, which reduces the risk of reading the code;
everywhere there is an autorun function;
key fobs are equipped with an information screen.

Model DXL

car alarm Pandora DXL has its own characteristics. Communication between the control panel and the system unit is carried out through several channels. As in all configurations, in the DXL 3000 model, the instruction contains all necessary information by use. If the driver installs this system, then he has the opportunity to receive all data on the state of the car in real time on mobile phone(the author of the video is DVR-Group.ru).

LX

The popularity of the LX model is due to its features. Thanks to the key fob, you can send and receive signals from the head unit. The modules are missing detachable connections which improves the reliability of the device.

The choice of the best signaling is up to the buyer and depends on his financial capabilities and preferences.

Instructions for use

The Pandora car alarm comes with an instruction that describes the model, the connection diagram and tips on setting up its functions.

How to connect?

You should start installing and connecting the signaling after studying the manuals that come with all devices.

Pandora goes through in stages:

First of all, the front panel of the passenger compartment is removed and the control unit is installed under it.
The antenna should be installed near the windshield.
The LED indicator is installed in a visible place.
Limit switches are installed on the body.
For a system with GSM function, the microphone is placed in a non-dampened place.
Everyone sets the service button where it is more convenient for him, but in a secret place.
The siren is installed under the hood, the horn should be directed downwards so that moisture does not collect.

After installing all the components, they must be connected to the wiring control unit in a single circuit to get a complete anti-theft system.

How to setup?

The car alarm is configured with a key fob by pressing a key combination. Setting up an anti-theft system with satellite tracking is best done through a laptop with Internet access. Thus, the updated software will be installed. Some functions work by pressing buttons from the key fob. Some features need to be programmed.

It is important to correctly adjust the sensitivity of the shock sensor so that it does not work for no reason at the slightest movement.

Possible malfunctions

Like any device, Pandora car alarms can fail.

Its main faults are:

there is no voltage from the battery;
the batteries are dead, the remote control does not work;
launch problems;
the signal is triggered for no apparent reason;
the impossibility of shutting down in case of false operation.

Pros and cons of the anti-theft system

In high demand GSM function. It allows you to use a satellite that will track the location of the machine and its condition. This increases safety and makes it possible to quickly find a car. This feature is available on DXL modifications.

Most Models burglar alarm use two-way communication technology. In case of unauthorized start, the owner has the ability to block the engine to prevent the car from being stolen. Additional sensors mounted on the car, increase the degree of protection vehicle. Car alarm Pandora can be installed on any brand of car.

Car alarm Pandora DXL 3000 - new model security complex DXL series, brought by the company's engineers to a high level of quality and reliability. Intuitive controls provide ease of use. The Pandora DXL 3000 alarm system is installed by specialists of service centers involved in the sale and installation of car security systems. Pandora is different high level reliability and resistance to hacking using code grabbers, scanners and similar devices.

Keychain Pandora DXl 3000

An advanced keychain with a liquid crystal screen attracts attention. The system embodied in the Pandora DXL 3000 is considered one of the most advanced to date. The developers brought some innovations to the structure of the key fob, returning the end position of the buttons, which improved the ergonomics of pressing and ensured the tightness of the case. The function of sound confirmation of pressing notifies the user of each key press of the Pandora DXL 3000 key fob.

The LCD screen of the key fob, being its most fragile part, is protected by a silicone damper. This protection technology was first used by developers when creating a radio transmitter. car alarm.

The damper protects the screen of the Pandora DXL 3000 alarm key fob from impacts and extreme loads, while providing more accurate indicator positioning. The sealed case does not allow moisture, dust and dirt to penetrate inside, damaging the built-in chip. The Pandora DXL 3000 alarm comes with a small Leather Case for a key fob, which for many car owners will be a pleasant surprise.

Key fob functions

Developers in new version car alarms saved LED indicators, displaying the state of protection, which is not bad and smart decision. The user can evaluate the performance of a two-way communication channel: a green indicator indicates the activation of the armed mode, a red indicator informs about the occurrence of an emergency situation or the need to transfer the car to the armed mode.

Basic car alarm functions

Interception of a radio signal, dialog code, electronic burglary protection.
Signal reception over long distances.
Automatic control of the communication channel.
Additional immobilizer that enhances protective functions Pandora car alarms DXL 3000.
11 protected zones.
Double pin.
Tilt and movement sensors.

Equipment

The Pandora DXL 3000 alarm is supplied with the following configuration:

Central signaling unit.
Two key fobs - main and additional. The main key fob is equipped with a liquid crystal display.
Shock, acceleration, tilt sensors.
Protective cover for key fob.
Receive/transmit module.
Valet button.
Light indicators.
Limit switches.
Wiring harnesses.
Instructions for operation Pandora DXL 3000.

Car alarm features

The Pandora DXL 3000 security complex is equipped with an improved version of a multi-channel high-speed radio path. The changes affected the transition during signal reception and transmission to free channels, service and working channels were optimized, adjustments were made to the circuitry of the cabin RF module. Such measures made it possible to increase the operating range of the warning channel and the command channel, and increased the stability of the system in the presence of interference.

The developers have optimized the LCD key fob, lowering the level of energy consumption and increasing the life of the batteries. The only drawback of the changes made was the incompatibility of key fobs and RF modules different models alarms.

Encoding algorithms

The Pandora DXl 3000 alarm system is distinguished by the cryptographic strength of the dialog authorization algorithms. Electronic hacking of car alarms is impossible due to the use of complex algorithm coding and unique keys encryption. To date, Pandora car alarms are the only security systems that use dialog coding and two-way communication not only in the main, but also in additional key fobs.

base unit

In the Pandora DXL 3000 car alarm, the base unit has been redesigned, which is now equipped with wide opportunities for programming timer channels. The main innovation is the entry of a PIN code to access certain functions and system options.

According to the instructions, Pandora DXL 3000 uses two instead of one PIN: Service-code and Master-code. Using the service code, you can transfer the system to the maintenance mode or enter the programming and settings mode of the security complex. Given code factory, so if desired, the user can change it. The Master-code system allows you to emergency disarm the car. The meaning of this code is indicated on plastic card supplied with the car alarm.

System Setup

The car alarm comes with a table of commands and statuses that allow you to configure the security system. This table lists the vehicle code supported on the CAN bus and information that includes all the features of the integrated interface.

Programming a car alarm begins with the selection of the make and model of the vehicle and the specific settings of the digital CAN bus. In the "Settings" table, the necessary parameters are selected, after which they are saved and recorded for further operation.

If the required code cannot be found in the table, it is entered manually. After the vehicle code is selected, the system parameters are configured.

The maximum functionality of the car alarm is realized when the following items are resolved:

arming mode.
Disarming mode.
System management.
Re-staging.

The car owner can additionally configure other system settings. All settings are saved in a separate file, which is located in the root folder of the security complex and is available for moving or copying.

Car alarm installation

Installation of the security complex can be carried out as in service centers, and independently by the car owner. There are several ways to install a Pandora car alarm - under the dashboard, in the engine compartment, or in the passenger compartment or body of the car.

When installing an alarm in the engine compartment, the blocking relay is located near the ignition switch, and a shock sensor is attached to the steering column. For this, they can be used plastic clamps with which the main parts are attached.

The system control unit when installing a car alarm under dashboard mounted in the engine compartment. A blocking relay is attached between the branches of the duct.

The third option for mounting a car alarm involves installing it anywhere in the cabin or car body with the optimal location of all components. base unit is placed either in the passenger compartment or in the back of the car, but the siren is installed under the battery pad. The hood trailer is attached next to the hood indicator with right side, and the trunk limit switch is installed next to the lock. The system is wired after the alarm is installed.

Installing the shock sensor

Shock sensors are installed last. The switch of the security complex - the Valet button - is located in such a way that it is not visible, but at the same time access to it is free. At the same time, there should not have been any electronics near her that could drown out the signal reception.

Connecting a car alarm to a personal computer

The security complex is connected to a personal computer via mini-USB. The base unit of the system is connected to the PC using the Valet button, while successful synchronization is confirmed by a light indicator.

After connecting the alarm to the computer, the LED starts to glow red-green color. For normal synchronization of the complex with a PC, a launch is required. software— Pandora DXL Loader. After starting the program, you need to enter the service pin code indicated on the card that comes with the alarm.

The code is entered by pressing the Valet key required amount times corresponding to each digit of the pin code. The pause between button presses should not exceed one second. If this time is exceeded, such a pause is regarded as a transition to the next digit.

The indicator of the system block notifies the end of the input of each digit and its reception with a red flash. The programming of the Pandora complex begins after all the code has been entered, which is accompanied by a red and green flash of the indicator.

The Pandora alarm system is a system of ultra-sensitive sensors capable of recognizing the most minimal impact on the car. These can be bumps, moving, scratches, tilts, etc. The company offers its customers a device with the "Pandora autostart" function with ignition support for little money.

This device domestic production. The first models were produced by the Kaluga Experimental Instrumentation Plant in 2004, and today the car alarm has managed to establish itself on the good side:

Large variety of assortment.
Simple installation and easy setup.
The presence of a protective function to intercept and scan the signal.
Long distance communication support.
Ability to block the engine and check the condition of the battery.
Monitoring the operation of the alarm using mobile application.
Control over the exact location of the car.
Features such as two-way Feedback, automatic start, etc.

ATTENTION! Found a completely simple way to reduce fuel consumption! Don't believe? An auto mechanic with 15 years of experience also did not believe until he tried it. And now he saves 35,000 rubles a year on gasoline!

An analogue of such products can be the Tomahawk system, which is perfect for all VAZ models. Car alarms, sometimes, are very necessary when you need to insure a car. If it's very expensive car, then no insurance company will take on such obligations without installing an alarm.

Before proceeding to the issue of using alarms from Pandora, you need to consider the range, which includes both budget and premium devices.

Pandora Deluxe (1870i, 1800, 1870, 2000, 2100) is considered best model this class. It has a durable case, several communication channels, an autorun function and an information display on the key fob.
Pandora OXL (3000, 3950, 4300, 3210, 3500, 3910, 4040), and in particular 5000 New, which also has the function of intercepting and encoding the signal from the key fob, remote control, automotive application. The alarm is connected with digital bus CAN.
Pandora LX (3055, 3297, 3290, 3257, 3030) has such features as the ability to control from the remote control, and the modules come without detachable connections.

Some devices are equipped GSM system, which allows you to track the car by satellite channel connections. This technology guarantees safety and the ability to quickly search for a car in unforeseen situations.

Autorun settings

With every technical device there is an instruction for its use, but not always a dry technical language allows you to figure out which buttons to press. This is a rather complicated device for a simple layman. Some commands are quite accessible by simply pressing the key fob button, but there are a number of nuances that you need to know, for example: holding the button or several commands with one click.

remote start engine can be controlled from a key fob, telephone and timer, both in winter, with heating turned on, and in summer period, with air conditioning. The principle and control options of this function are as follows:

The timer sets the time during which the engine must be warmed up (this is a simplified use of the function, suitable for everyone).
The key fob turns on the heating by pressing a button without leaving home (the remote control is always at hand, which is very convenient).
SMS from the phone sends a command to warm up (good to use for residents of big cities when the car is at a great distance).
Internet - the application allows using the application to activate the autorun system (for advanced users).

In order to start and stop the car from the key fob, you must do the following:

Shut off the car.
Put the car on guard.
Press the arming button and hold it for 5 seconds 3 times, after which the engine will start.
To stop the motor, do the same operation.

In order to set it to autostart by temperature and time from the key fob, you should know that these modes are programmed from a device with an LCD display. To set up the function, do the following:

By quickly pressing the letter F, select the "chamomile" item.
Once in the auto start menu, make settings where you can additionally set the auto start time, warm-up time and starter scroll time using the same letter F.
Customize all 8 menu items by turning on and off the lock icon, which means saving or canceling the changes made.
The result of confirming the setting will be two times sound signal on a keychain.
To exit the mode, you need to press and hold the letter F for 1 second, otherwise the exit will occur automatically without saving all the settings.

In order to disable autorun, you also need to go to the menu and press the open lock button, then the system will deactivate all installed data.

Important! Timed auto start can be programmed for 5, 7, 14 days or unlimited, after which automatic deactivation will occur. And autostart by temperature will work if temperature regime turned on and the temperature is set.

The main reasons why autorun does not work and how to fix them

As with any other technique, incidents happen in the operation of an alarm with auto start, most often due to the fault of the owner of the car, for example:

All settings are made, the engine started, warmed up in time and temperature. After stopping, autostart does not work. There may be several options for troubleshooting: for example, if the temperature is set to 19 °, then when it drops, the car will start, and if it considers that the engine is still warm, it may not start. In this case, you need to make correct settings by temperature.

You should also check if the temperature start is not prohibited.

And you can also adjust the so-called minimum time between launches.

Alternatively, the engine temperature sensor may be faulty. To do this, you need to check the data on the battery, the temperature in the cabin and the temperature of the motor. Turn off the engine, press button 3 with short presses until SNACK appears, then press button 1. If the temperature after the letter E on the screen is WARMER, then autostart will not occur.

In some models, to restore autostart by temperature, you need to update the firmware.

After disarming, a car started from auto start sometimes stalls. This feature applies to the 3500 model. If the engine running time is less than 3 minutes, then it will stall when disarmed.
Why does the car siren turn off only from the key, although the signaling is connected to the key fob. When the car is locked with the key, the regular alarm and the signaling is triggered during autorun, since the standard system is not designed to work with autorun. If only a key fob is used, then the situation can be solved by turning off the standard alarm.
If the car is not put on a car alarm at all, then it is better to turn it off and contact a specialist, since the problem may be both in the device itself and in the immobilizer crawler.

Otherwise, the Pandora autorun function does not bring any special problems to its owners, but on the contrary, it can make using the car more comfortable and safer.

If sublevel II-3.8 is allowed" Auto power on software neutral", then

the program neutral procedure will be automatically performed when the handbrake is raised.

Failure to perform the "software neutral" procedure entails the failure of the system to perform

remote and automatic engine start commands.

Remote engine start
To remotely start the engine, provided that the system is ready to start, it is necessary

press and hold button "1" for three seconds (three short beeps of the key fob).

An audible signal will confirm the receipt of the command, a crossed-out shock icon will appear on the display.

sensor and a flashing fan icon, indicating preparations for starting the engine. Che-

After a few seconds, the engine will start, which will be signaled by an audible signal "engine start"

and a rotating fan icon.

The duration of the engine operation is set either by the warm-up time or by the stop temperature.

(see "Automatic engine start", item 5 and item 7).

The maximum duration of the engine operation is limited by software 30 - 60 minutes. (sublevel

II-6.1-6.4 programming menu of the installation manual).

engine

Automatic start

engine starter

Preparation indication

to engine start

Engine

stopped

in guard mode

engine running

engine

Click the button

(Hold

button, 2 sound

key fob signal)

shutdown

engine

Trunk open

open door

Hood open

Handbrake not engaged

Remote engine start

Click the button

Movement detected/

car tilt

time setting

Hours Minutes

installation

start temperature

Zoom Decrease

time setting

warming up

Setting the selected modes

Cancel selected modes

any of the autorun modes.

Push button

select icon

Entering the mode

programming

settings

daily timer

temperature trigger

periodic heating

Zoom Decrease

setting temp.

shutdown

stop

by temperature

Zoom Decrease

are selected sequentially

in the menu by pressing the button.

The menu has 8 sublevels.

To stop the engine, which is in the warm-up mode remotely, you must press

and hold the button "2" of the key fob for two or more seconds. The engine will immediately

stopped, which will confirm the sound signal "engine stopped" and the extinguished icon

fan.

engine

Remote engine start

Automatic start

engine starter

Preparation indication

to engine start

Starting the engine on command from the key fob _______________________________________

Stopping the engine on command from the key fob ______________________________________________

Error indication when starting / running the engine ________________________________

Engine

stopped

in guard mode

engine running

Engine runtime is limited to 30-60 minutes.

item II-10.4 or the condition of heating up to t

engine

Click the button

(Hold

button, 2 sound

key fob signal)

shutdown

engine

Trunk open

open door

Hood open

Handbrake not engaged

Remote engine start

Click the button

Movement detected/

car tilt

Automatic engine start functions __________________________________________

time setting

Hours Minutes

installation

start temperature

Zoom Decrease

time setting

warming up

Setting the selected modes

Cancel selected modes

The icon flashes when enabled.
any of the autorun modes.

Push button

select icon

Entering the mode

programming

settings

daily timer

temperature trigger

periodic heating

Zoom Decrease

setting temp.

shutdown

stop

by temperature

Zoom Decrease

Automatic start modes

are selected sequentially

in the menu by pressing the button.

The menu has 8 sublevels.

If this procedure is not followed

settings will remain the same.

One minute before the regular engine stop, a notification about this event will be sent to the key fob.

The icon on the key fob will flash.

and 1 every 10 sec. the melody "engine stop" will sound

after 1 min." In this case, you can send a command to extend the operation of the engine:

If during the sound of the melody “engine stop after 1 min.” send run command

engine from the key fob, the engine operation time will be increased by 5 minutes. This procedure can

perform multiple times.

Automatic engine start
The PANDORA DXL 33OO system allows the owner to set the automatic

starting and stopping the engine to warm up or cool down the air conditioner. Synchronized

bathroom real-time clock key fob and base unit system, and other offline settings

systems allow you to implement a variety of conditions for starting and operating the engine, regardless of

on whether the key fob is in the command radio channel operability zone or not. Program-

automatic start modes and engine operating conditions are controlled on the key fob

Pandora alarm with auto start created Russian specialists using high-precision equipment for element installation and control. This allowed the manufacturer to obtain a quality product that effectively protects the car from hacking and theft. The Pandora 3910 user manual explains in detail how to perform self-assembly and system setup.

[ Hide ]

Description and equipment

The Pandora DXL Pro car alarm is a anti-theft system belonging to the premium category. It is designed specifically for installation on machines of class B, C, D

Complete set of "signaling" with auto start:

A set of wires that will ensure the connection of all modules and devices of the complex.
Diode indicator. It shows the status of the car alarm.
Temperature sensor. With it, you can connect and configure the option to automatically start the motor by temperature.
Service mode button Valet. After its activation, the system will work in an emergency state. This will turn off the alarm and configure the key fobs.
USB cable for connection.
Labels designed to identify the car owner.
Auxiliary controller plug with wiring.
Case for installing labels in it.
Limit switch.
A special block designed to implement the autorun option.
GSM module.
The microphone used to listen in on the cabin.
A set of ties for connecting and fixing electrical circuits.
Main and additional control.
User manual for installation and operation of the complex.

The Stal63 channel reviewed the work of the security complex on the Toyota Camry Car.

Main functions and features

The main features of the complex:

the presence of an integrated GSM interface, data transmission is carried out via a 900/1800 MHz channel;
the possibility of simultaneous operation of the complex with two digital buses;
it is allowed to connect tires K-Line, LIN, P-Plus, K-Bas, V-Bas;
a multifunctional interface is used to transmit pulses;
data transfer between the tags and the complex is carried out at a frequency of 2.4 GHz;
16 security zones operating independently of each other;
sensitivity, movement and impact controllers will allow you to record unauthorized entry into the car interior;
for data transmission, an individual dialogue encryption code is used;
for emergency arming and disarming, another individual code is used;
thanks to the USB output, the car owner can adjust the parameters installed system when connected to a port;
the package includes a five-channel autorun unit, which allows you to configure and activate the system for starting and controlling the power unit;
the presence of a digital bus allows you to customize the control of the preheating system with your own hands;
remote start of the motor can be configured by a command sent from a smartphone on which a mobile application is installed;
you can set the start of the motor by a timer, air temperature, at a set time or when the voltage in the on-board network decreases;
it is possible to control the main functions of the complex using a mobile gadget;
wiretapping of the salon, as well as the ability to listen to the events that took place by phone;
the presence of the option of remote blocking of the motor;
it is allowed to implement the function of obtaining the coordinates of the location of the car, we are talking about both the current coordinates and the data sent to the phone from the alarm memory;
another feature is the ability to notify the car owner through sound and SMS messages;
the ability to configure controllers using mobile devices;
economical power consumption will prevent the discharge of a dead battery.

Controlled zones

When the security mode is activated, the complex will control several zones:

touch controllers;
car door locks;
the motion controller protects the interior from hacking;
limit switches will protect the hood, as well as the luggage compartment from breaking;
the system controls the voltage level in the on-board network of the car and warns the car owner about the decrease in the parameter;
the security complex controls the braking system;
car alarm monitors the operation of the ignition system.

Andrey Popov showed how the Pandora 3910 security system installed on a Hyundai Taxon car works.

Advantages and disadvantages

The list of advantages and disadvantages was created based on consumer feedback, let's start with the pros:

The presence of auto start allows the car owner to get into the already warmed up car interior, which is especially important for the winter season.
Effective machine protection. Many users scold the system only because it was created in Russia. Despite this, the security complex does an excellent job with its duties, even with critical low temperatures. The system consists of many devices and elements that provide protection at different levels.
The presence of the GSM-module will allow, if necessary, to determine the coordinates of the car, if there was a break-in and theft of the vehicle.
Using the built-in microphone, the owner of the car can at any time find out what is happening in the car.
The presence of a clear manual will allow the car owner to independently adjust the main parameters of the system.

Difficulty of installation. If you can set up the system yourself, then with the installation the situation is different. In the case when you do not have the skills and experience, it is better to entrust this task to specialists.
Reviews show that the key fob often fails in this model of the complex. If the remote control is working, then you need to change the battery. In a situation where this did not help, you will have to check and repair the remote control.
High price. Due to the use of high-tech solutions in production, the cost of the complex will not be small.

How to install?

To connect the system, a diagram is used, which is located in the Pandora 3910 instruction manual.

General scheme connection part 1 General wiring diagram part 2

The installation procedure is as follows:

Open the hood and disconnect the battery terminal. To disconnect the negative terminal, you will need wrench loosen the bolt securing the clamp. Then the terminal is removed to the side.
Remove the instrument panel. Depending on the model of car, the procedure may differ. To remove the facing elements, unscrew the bolts and dismantle the upholstery. Remove the dashboard carefully, disconnecting all connectors with wires from it. Right behind the tidy you will see a CAN bus, the security complex's electrical circuits are connected to it. The OBD diagnostic connector is connected to the bus, power wires, fuel gauge and other components.
Then the lower part of the center console is dismantled. Behind the dashboard is a leg lighting system.
When open access to the OBD connector is obtained, the digital bus must be connected.
The installation of the main module of the system is in progress. It must be installed so that, if necessary, the car owner has access to the device, but the attacker could not find it. We recommend installing the device in free space behind the dashboard. Alternatively, you can put the block behind the glove compartment, under the seat or behind the ashtray, if there is one. free place. Do not install under the dashboard near the hood release lever. Mount the device and fix it securely in place. To exclude the effect of vibrations on the module, it can be additionally wrapped in foam rubber.
The service button is recommended to be installed in a place inaccessible to criminals. In this case, the user must have access to this element from the driver's seat.
The transceiver is installed inside the car. It is better to install it as high as possible to ensure high-quality signal reception and transmission. The antenna adapter must not be near metal objects, their presence will lead to the fact that the signal quality will be weak, interference will occur.
Shock, tilt and motion sensors are mounted in the cabin. The installation location should be selected in accordance with the manufacturer's recommendations. The sensitivity controller is preferably located in the central part of the body. Often it is placed on a partition separating the engine compartment and the passenger compartment. When installing the sensor, do not place a plastic gasket under the device, as its presence will cause an alarm to go off for no reason.
Limit switches are installed on the doors, luggage compartment and hood. Connecting devices to the control module is carried out in accordance with the diagram.

The Auto Install channel showed the result of installing the 3910 security complex on a Mazda CX-5 car.

How to enter system programming mode?

Self-programming of the 3910 by car owners is not approved by the manufacturer, since this procedure is quite complicated and can make serious changes to the factory configuration.

Programming can be done in several ways:

using the service mode key Valet;
via laptop and software;
using a smartphone on which you must first install the mobile application.

To use the service button, the car owner must know the password. Initially, the complex is assigned code 1111. To program the system, open the doors and press the Valet key four times, between each click you must pause for one second. When the buttons are pressed quickly, the complex will perceive these actions as a double or triple click. If each digit of the password is entered correctly, the LED indicator will blink once. If the light flashes four times, it means that you have successfully entered the setup mode.

If you want to use a computer for setup, you must first download the DXL Loader application to it. The laptop is connected to the system via a mini-USB cable. After starting the software, enter the password to enter the programming mode. After programming, you just need to turn off the ignition, this will save the configuration.

The user BaronKorf spoke about the features of the mobile application, as well as the monitoring web resource from Pandora.

User manual

What you need to know about the use of "signals":

Activation and deactivation of the armed mode can be performed using the button on the remote control. To implement the function, the car owner must be within the range of the system, which is about five meters in the range of the car. Press the button on the key fob, after which the complex will start encrypted data exchange between the device and the control unit. Information will be transmitted through one of 125 channels.
To turn on security mode with activated option Free hands, it is necessary to deactivate the ignition in the car and move away with the tag remote control at a distance of about ten meters. When the complex detects the distance of the tag from the transceiver, the security mode will turn on automatically. To deactivate the protection, you just need to approach the car. The control module will detect the approach of the tag and disarm.
If the key with the label was lost, then you can disable the security mode using your smartphone. It is necessary to make a call to the number set in the GSM module. When security system answers, the car owner must enter the command "998*".

Alarm control from your phone

The complex can be controlled using a telephone, for this you need to call the GSM module number and enter one of the commands:

to return to previous state system press #;
so that the complex repeats the last spoken message, press *;
the combination "1 *" will allow the activation of the security mode;
to disable the protection mode, enter the combination "0 *";
to silently activate the armed mode, enter "10*";
to disable silent protection, enter the combination "00*";
help call - command "9 *";
to listen to the history of events that occurred during the absence of the car owner, enter the combination "09 *";
activation of the microphone for listening to the cabin is carried out by pressing the keys "007 *";
to request the balance of the SIM card installed in the GSM module, enter "100*";
to perform a remote start of the motor, as well as to extend its operation, enter "123 *";
to stop the operation of the power unit remotely, enter "321 *";
to request the current coordinates of the location of the machine, enter "500*";
activation of the pre-heating device for the power unit for diesel engines - "156 *";
to disable this function, enter the command "651 *";
command "789*" allows you to enable automatic start of the machine's motor;
"987 *" - prohibition of the possibility of remote engine start;
combination "666 *" provides blocking of the power unit;
to disable the blocking of the motor of the machine, the command "999 *" is entered;
complete information about anti-theft complex- "258*";
to activate the immobilizer, as well as the Anti-hijack function, you must enter the command "888 *";
to disable the immo and the Anti-hijack option, enter the combination "998*".

The Alarm channel spoke about the capabilities of an Android-based mobile application for managing the Pandora 3910 complex.

When activating or deactivating one or another Pandora 3910 alarm function, the system must confirm the action with a voice message.

Faults and solutions

What problems can a car owner face:

The alarm mode "signaling" works for no reason. The system indicates that the Sensitivity, Tilt, or Motion controller has been activated. Most likely, the reason is incorrect adjustment or installation of sensors. Try lowering the sensitivity of your devices.
The security complex does not send messages to the number of the car owner upon request. There may be several reasons. The message center number may not have been programmed correctly. If the installation procedure was carried out by specialists, then contact them to solve the problem. The reason may be that the mobile operator has blocked the sending of messages. Then you need to contact the representative of the company providing communication services.
It is not possible to make a call to the complex from the additional number of the car owner. If you call the system number from another phone, you must enter a guest password to identify the user. Initially, the “signaling” is assigned code 1234. If the system was installed by specialists, the password can be changed.
The security complex cannot determine the number of the car owner. Depending on the mobile operator, the company may use different prefixes at the beginning of the number. When setting up the car owner's phone, only those prefixes that are selected by the mobile provider should be used.
The alarm mode has been activated, but the system cannot reach the additional number of the car owner. The reason should be sought in the operator. The voicemail option may have been activated for this number. It must be turned off.

Categories

Popular