How to connect a watering hose. How to change a hose on a faucet. Irrigation equipment

Needless to say, solid welded or detachable connection polymer or iron pipes are reliable and durable, but often there are situations at a time when connection can only be made with flexible hoses. We will talk later about how to connect the hose to the faucet with our own hands, and about the varieties of the hoses themselves and related fittings to them.

Varieties of hoses and valves

It's no secret that both the hoses themselves and the faucets vary quite a lot depending on the application. It is conditionally possible to distinguish 3 main directions. First of all, this equipment is designed for irrigation in the country or in a private house.

The second number is high-pressure plumbing equipment, for example, a hose for a faucet to the kitchen. And last but not least, and important direction experts highlight gas hoses, gas taps, watering cans and other gas connecting equipment.

Irrigation equipment

This type of equipment differs in two parameters, this is the section and the material used to make the hose. If we talk about the cross section, then the most popular here is a diameter of 13 mm, most of the watering taps are produced for it.

Despite the fact that for watering huge areas, the owners prefer a faucet for a 3 4 inch hose, this is about 20 mm.

Accordingly, the hoses are taken with a larger diameter.

Plumbing equipment

Everything is quite simple here, the connection of the hose to the faucet in the kitchen or in the bathroom is carried out by flexible polymer, in some cases, rubber hoses in an iron braid. The docking itself is carried out using a sealed threaded pipe connection. Hoses are available for warm and cold water, respectively, they are marked with a red or blue stripe.

Tip: when purchasing both plumbing and gas connecting hose, its duty, should be greater than the distance between connection points. Under no circumstances should the hose be mounted tight, the instructions require that the hose sag easily.

Gas equipment

Any gas equipment was constantly treated with particular seriousness, because a breakdown in the water supply or irrigation system threatens to flood the neighbors or get wet at most. An accident on a gas pipeline can lead to much more important consequences, up to a real explosion.

The material for gas connections also comes in 2 types. The rubber sleeve, of course, has low price, but he will help in the kitchen for no more than 5 years. The steel-braided gas hose is made of special heat-resistant polymers, plus it is reinforced on top with a reinforcing jacket made of of stainless steel. Any gas equipment, whether it is a hose nozzle for a faucet, the faucet itself or a connecting sleeve, is marked yellow.

Tip: before purchasing a connecting sleeve, it would not be superfluous to check in gas work what specific types of equipment are allowed in the area. The fact is that the installation of a rubber connection is far from being allowed everywhere. And in order not to run into a fine later, it is better to raise local regulations.

Non-specialized installation rules

We have already learned that the connections differ significantly depending on the purpose of the reinforcement, respectively, and the methods of installation of this reinforcement will be different.

If we talk about watering fixtures, then before connecting the hose to the tap, it is necessary to fix the connecting fitting on this hose with connectors. The faucet connection unit can be connected with a thread or a fitting.

Tip: if you plan to use other types of interchangeable tips in addition to a faucet with a sprinkler, then it is better to immediately buy connectors with hitchhiking.

To fix the connector at the end of the watering hose, it is necessary to cut off the edge of the hose as evenly as possible and put a clamping nut on it. Then go well, until it stops, put a soft hose on the connector pipe and tighten the nut put on earlier.

This method is now the most practical, because, unlike crimping, this fastening unit can, if necessary, be easily disassembled and rearranged to a new location.

To power a pair of watering sleeves from one node, there is an adapter or a hose splitter with a tap. The supply line, in most cases, is joined to such an adapter through a reliable threaded connection. All other sleeves that go away from the adapter are much more ergonomically docked simple method, putting the hose on the pipe and securing it with a simple iron clamp.

Concerning plumbing system with high blood pressure, then the installation instructions are also quite simple. Initially, it goes without saying to go to dismantle the dilapidated mixer and clean up the installation site. In this case, we will proceed from the fact that everything is installed new and connected using flexible hoses.

First, flexible hoses are connected to the mixer. Before connecting a hose to a faucet, make sure that the rubber gaskets and on the open part of the thread, wind up a couple of turns of sealing fum tape. The tapes must be wound so much that the thread is twisted tightly and when fully screwed in, part of the tape is squeezed out.

When it comes to connecting a faucet in the kitchen, experts recommend installing a special hose splitter with a tap on the cold water main. It will be needed to connect water filters and a washing machine. Then the mixer is attached to the sink, the hoses are connected to the line.

Compared to watering and plumbing, gas hoses are the easiest to connect, but hobbyists should still not do this, as a mistake can be expensive. The diameter of the hose for a standard gas oven must be at least 10 mm, otherwise there will not be enough gas for all 4 burners and the oven.

Between the furnace and the sleeve, is obliged to without fail stand dielectric gasket to avoid the accumulation of stray currents. Experienced gas workers recommend, in addition to using a fum-tape, before connecting the hose to a tap or stove, lubricate the gaskets simple soap, this will significantly increase the tightness. Upon completion of installation, all connections must be smeared with liquid soapy water, in case there is a leak, soap bubbles will be demonstrated.

The video in this article demonstrates some of the necessary little things.

Conclusion

As you can see the choice and connection various kinds hoses is not as difficult as it might seem. But still, it is better to entrust the installation of gas fittings and connections to experts or, upon completion of installation, invite an expert for verification.

The need to take advantage of the flow tap water outside the sink or sink occurs frequently. The bucket or pan does not fit in the container and is difficult to handle. That's when you need an adapter for a hose to a faucet. It remains to find out which of the devices for draining water masses is right for you and how to use it correctly.

Use cases

The issue of redirecting the water flow becomes relevant if you intend to water the summer cottage, to facilitate cleaning large area, carry out repairs in the house, ventilate and drain boiling water from heating system. Adapter fittings – best option problem solving. They are simple, like nozzles for a hose on a faucet or valve, but complicated designs in this group are also not uncommon.

Accessory set for multifunctional plug-in connection with fittings and watering can

Watering accessories

The classification of hose products is based on differences in diameter and material. Gardeners consider an internal section of 13 mm to be the most convenient for connecting to a water supply system for the purpose of watering beds. Approaching him in popularity in the garden "line" diameters of 18 and 25 mm.

A simple plastic splitter for a watering hose is a democratic solution for summer residents

Material in the manufacture of a hose for a kitchen faucet country house can serve:

• technical rubber;
• plastic;
• polyvinyl chloride;
• nylon.

The owners of apartments and cottages recognized rubber as more reliable and durable than others: it calmly “tolerates” temperature fluctuations, is not afraid of kinks and is strong enough. Plastic breaks and becomes coated, nylon deforms with frequent transitions from a cold environment to a hot one. The option with a reinforced PVC watering sleeve, comfortable and wear-resistant, is very good, but expensive for many.
The list of elements of the irrigation system will necessarily include:

• fitting (threaded or without thread) with connector;
• repair coupling with one or a pair of adapters.

If there are several directions of irrigation, a combination of a hose splitter with a tap (this part diluting the flows is also called an adapter) will be useful. The adapter bar-block will allow not only to wash your hands, but also to expand the water supply circuit due to water filters. And it will also provide the ability to quickly and easily connect the washing machine to a ready-made household communications unit.

Branching block makes it possible to connect 4 hoses to the system at once

Standard adapter with 3/4 watering tap - the best articulation option

Gas and water fittings

The arrangement of the kitchen-bathroom area is rarely complete today without flexible polymer snake hoses braided with metal. Docking is carried out by means of a sealed threaded connection hose with faucet and others sanitary accessories. The marking of the hoses is different: the blue stripe is for a cold jet, the red one is for a heated one. You should buy them with a margin of length.
Purchase and installation gas equipment- a task of increased responsibility, since breakdowns and leaks in such an important communication circuit are not just unpleasant, but dangerous. Instead of a short-lived rubber sleeve, it is better to immediately purchase a heat-resistant polymer sleeve in a steel braid: it is stronger and complies with GOST. The gas-carrying set of hoses and taps with watering cans for gas are marked in yellow.

The universal adapter for the crane is equipped with a locking handle and a sieve divider

How to connect a hose to a faucet

Before using the design

1. Pick up a nozzle-adapter - a small multi-layered ring that is screwed onto a faucet for subsequent articulation with a narrower threaded tip of a garden hose.
2. Covering the sink hole with a towel (so as not to drop or drown small parts), unscrew the valve head and check the tightness of its joint with the rim plumbing fixture.
3. If there is no vacuum regulator valve in the system, first screw the adapter valve (they are available in stores) onto the thread of the flexible watering tube. It will become a water purifier.
4. Before connecting the hose to the faucet, make sure that the rubber/vinyl gasket for the hose end has not fallen out, that it is tight and that the connection is not in danger of leaking.
5. Screw the hose with the valve to the nozzle of the water tap, be sure to check the tightness and water tightness of the resulting contact when tightening.

After using the structure

1. Unscrew the pair of “hose-nozzle” and replace the faucet tip. If there is a leak that has not been observed before, wrap a Teflon strip around the threaded part of the spout.
2. On the gasket strip that covered the thread (extra pieces of it should not stick out in the opening), put the head back on, ensuring the lost tightness.

Significantly simplifies the processing-irrigation of farmland a set of adapters with a 3/4 tap for a hose with a nipple and a connector that cuts off the media autonomously. This is an affordable product that is relatively easy to find in our stores. As, however, and a steel drain valve with a hose nozzle for draining. Try to make your life easier with the help of such devices - they will always pay off.

ball valve often sold with a ready-made adapter

The inlet hose is the product on which your peace of mind and the safety of repairs in the apartment of the neighbors below depend. The fact is that the inlet hose sold with the washing machine does not always have the right length. It may have a poorly compressed compression sleeve, a reinforcing film of polyester threads may have breaks. The upper layers of quality PVC at any moment they can burst and provoke a spill of water. In this regard, the inlet hose for the washing machine must meet a number of stringent requirements so as not to let the consumer down.

Types of inlet hoses

The inlet hose for the washing machine is PVC tube, reinforced with a nylon braid with nuts and fittings, one side of which is connected to the water supply system of a private house or apartment, and the other to a washing machine. Nuts and fittings are made of plastic and must be tightened by hand or they may crack. At the junction of the fitting with the pipe, a high-quality inlet hose has pressed metal sleeves. Each product has a label with numbers indicating operating pressure and temperature. Standard inlet hose withstands pressure at 4 Bars. To prevent the hose from expanding under the pressure of water, its base is wrapped with several layers of reinforced threads. Inlet hoses for washing machines are:

• with a fixed length of 1−5 m;
• in the bay (length up to 10 m);
• telescopic hoses, which due to the corrugated wave, the hose increases in length;
• hoses with the Aqua-stop system that protect the washing machine from leaks;

About the system Aqua stop must be told separately. The fact is that during the supply of water to the washing machine, a lot of pressure acts on the hose, so it may not withstand and burst, flooding the neighbors and damaging the property in the apartment. Aqua system - stop will not allow it. It is a double inlet hose that can withstand pressure up to 70 bar, with a knob filled with a special powder or equipped with a solenoid valve.

If the hose suddenly bursts, water will begin to flow into the knob. The powder expands, thereby blocking the flow of water from the tap. Or the valve works and shuts off the flow of water. Valve control sensors are securely hidden under the outer sheath of the flexible hose. The sheath envelops the entire hose up to its end inside the washing machine. Even if the hose breaks at the very exit, the water will still not flow out, but will be collected in a special tray located at the bottom of the washing machine. The tray is equipped with a sensitive float that, when water appears, rises and closes the contacts of the microswitch. In addition, the valve is activated when the working tank is full, the pipeline of the machine is damaged, or due to an overdose. washing powder foam climbs outside the working tank out.

In some models, the Aqua-stop system is equipped with emergency pump, which begins to pump out water in case of failure of the emergency valve. It is worth saying that the inlet hose with the Aqua-stop system operates only once in the event of an accident. Once the system has been triggered, the hose cannot be reused and must be disposed of. However, maybe this case will help you. avoid flood and great material damage yourself and your neighbors. The inlet hose with the Aqua-stop system is sold in the same department as Appliances. Every self-respecting brand releases to its washing machines, in addition to conventional hoses, hoses with the Aqua-stop system. With such a hose, you can not be afraid that flooding will occur in your absence.

Specifications for inlet hoses

How to connect the inlet hose to the washing machine?

With regard to the length of the inlet hose, there is only one limitation: that the total total length from the hose to the drain did not exceed 15 meters. It means that maximum length the inlet hose must not exceed 3 m. Otherwise, the load on the drain pump will be too great and it may break. The inlet hose has a standard ¾ inch thread and connects to a stopcock. An eyeliner to plastic water pipes cuts easily and simply. In new houses and during major repairs, a place for installing a faucet for a washing machine is designed in advance.

If in the house overhaul not carried out and water pipes not designed to connect a washing machine, then in this case the inlet hose is installed in front of the bath faucet or screwed onto the float valve of the drain tank. For this:

• unscrew the flexible water supply hose from the float valve;
• wind on the inlet-faucet;
• a flexible hose is attached to it.

To seal on the thread of the outlet of the float valve, wind FUM tape. If the inlet hose is attached to the mixer, then the mixer itself is removed, and on the eccentric with cold water the tap for connecting to the washing machine is screwed on, and on the eccentric with hot water- clutch. On top of this, the mixer itself is installed. Of course, this is not the most the best way, but you never know, it will also come in handy. There are even special taps for connection to float valves toilet bowls, as well as wall-mounted faucets.

The drain hose, as well as the inlet hose, are included in the kit. It serves to drain the water used during washing into sewer drain. However, the length of the hose offered for the washing machine does not always allow you to reach the drain point, so consumers demand drain hoses no less than inlet hoses. They have branch pipes at both ends, and such a hose can be stretched in length. Branch pipes provide hermetic connection at the junctions. Drain hoses do not have specifications and are designed only for the natural pressure of the drained water. The material for their manufacture is rubber, which, under the influence hot water and detergents chemicals and bleach cracks and bursts, despite the reinforcement of the wire helix.

How to connect the drain hose?

With plastic guide drain hose attaches to the edge of an acrylic bathtub or sink. You can use a siphon from the washbasin as a drain, or buy special double siphon with additional outlet for the drain hose of the washing machine. If you do not have enough hose length to drain the water, then this situation is easy to fix. It is necessary to purchase a plastic extension cord, another drain hose and two clamps. The hose coming out of the washing machine is inserted into the plastic extension and the second hose is inserted on the other side of the extension. Both hoses are secured with clamps. Everything, an elongated hose can be connected to the sewer.

Replacing the drain hose is easier than replacing the inlet hose. This is due to the fact that in order to get to the base of the drain hose, you need to disassemble the washing machine a little and climb inside it. Some brands of washing machines have a drain hose attached to the top of the cabinet, while others have a drain hose attached to the bottom. To find out what the connection is in your washing machine, you need to remove the cover of the washing machine. Although some brands, such as AEG, Siemens and Bosch, need put away front of the body .

However, let's focus on replacing the drain hose through the back of the case, as is done with the brands Indesit, Ariston, LG, Candy, Ardo, Beko, Samsung, Whirpool. For these models, the drain hose is located at the bottom of the rear case cover. After removing the panel (this is done easily):

The replacement of the drain hose is completely different in models where the hose is located along the front panel.

We get dispenser container. Then we remove the plinth panel, loosen the clamp that fixes the door cuff, and unfasten the cuff from the door wall. Then the drain pump filter is removed (you also need to prepare a rag and a bucket beforehand). After the residual water flows out, remove front end panels. For this, screws are twisted with a screwdriver. The bottom of the wall of the panel must be moved towards itself until a gap of 5 cm is formed. We put our hand in there and look for hatch blocking device. From it we detach the connector with wires. After that, pull the panel towards you and remove it.

Before us opened access to the drain hose. The fixing elements are removed from it, and the hose is disconnected from the pump. Note the location of the hose and fittings. Disconnect and remove the hose. We connect a new hose, fix it and assemble the machine, after checking the tightness of the hose connection to the pump.

Top-loading washing machines have a drain hose on the side. To replace it, you need to do all the steps that were described in previous cases, only the side panel is removed, not the back or front panel.

Drain hoses for washing machines

Video of connecting hoses to a washing machine

Before buying a washing machine, many are wondering how to properly connect it to communications. There are two options for the development of events: call professional master Or do all the work yourself. Self installation- a responsible matter, you will need to observe all the details, correctly connect the inlet hose to the water supply, and drain the drain into the sewer. It is also important to choose a place for installation and correctly conduct the power supply for the device. Instructions and useful tips will help you not to get confused in all stages of installation.

Selecting a location for installation

In a standard apartment there are several places where you can place a washing machine - a bath, a toilet or a kitchen. The toilet is usually placed narrow appliances with a horizontal load of laundry. In exceptional cases, the machine is installed in the corridor or pantry, if possible.

The washing machine must be installed strictly on the level of the floor

The main condition for choosing a place for washing machine- It's perfect Smooth surface gender.

Advice. It is best to identify the machine on a concrete floor. In this way, vibrations during operation can be reduced. Retractable legs help provide correct position device.

Unpacking the machine

Manufacturers take care of the transportation of their goods very carefully. The washing machine is carefully packed. This is done in order to avoid damage during transportation.

Attention! Before installation, read the instructions and follow all the necessary steps.

The machine must be released from the factory packaging and the transport bolts that fix the device tank must be removed. They are easily unscrewed, and plugs are attached instead.

Attention! Do not operate the washing machine with shipping bolts, otherwise damage may result. This failure is not covered by the warranty.

Required Tools

Connecting a washing machine will require you not only to study the instructions or your own knowledge, but also to have some tools. So get ready:

• adjustable and gas key;
• ball valve;
• fitting, tee or compression coupling (depending on the type of pipes);
• threaded adapter;
• withdrawal - if necessary;
• flexible hose.

Washing machine installation tools

Connecting the appliance to the plumbing system

You can connect the machine to the water supply in several ways:

1. Connection without the use of plumbing. This option is more suitable for use in the country. After all, country life should also be comfortable. And the lack of running water should not be the reason for the rejection of the benefits of civilization. So, you will need a large tank, which must be installed at a height of at least 3 m. Connect the hose from the machine to it. Thus, the necessary pressure will be created. If you do not want to carry out high-altitude work with the tank, then you can purchase pumping station, but this method will be very expensive.

   

   Connecting the washing machine through the tank

2. Connection via a tee. The easy way connections. To do this, use a flexible hose. It is connected to a water faucet or toilet tank. The hose to be connected must be of sufficient length and must be connected using a tee. Before each wash, the faucet hose will have to be unscrewed. This is not very convenient and this method can be used as a temporary option. Connecting the washing machine to the water supply of the toilet tank is a good idea, but only if they are located nearby.

   

   Tee connection

3. Connection via metal-plastic pipes through a fitting. great way for owners. AT cold pipe a part is cut out, and a fitting (connecting tee) is cut into the opening, to which the ball valve is fixed. The connecting sections must be sealed with rubber cuffs.

   

   Connection through metal-plastic pipes

4. Connection by means of a compression sleeve. For this method, you will need a ¾ dm flexible hose. It must be connected to the machine and a special faucet that cuts into the water supply through a compression coupling. This is only done if the pipe is metal. The coupling includes several halves, which are put on the pipe and tightened with bolts. It also includes a threaded outlet, on which a crane is put on (preferably a ball valve). For water to enter the pipe, a hole is made through the coupling.

   

   Connection via compression sleeve

Features of mounting the machine to the sewerage system

When the work on connecting the washing machine to the plumbing is completed, it's time to think about where the dirty waste water will go. The device must be connected to sewer system. This can be done in several ways.

• Draining water into a bathtub or sink. A very simple option, but perhaps not the most reliable. Some manufacturers take into account in the configuration of the washing machine a “hook” hose, which is fixed on the wall of the bathtub or sink. Its advantage is that you do not need to bother installing the machine to the sewer. But there are many more disadvantages. Dirty water will stain the enamel of the bath, especially acrylic. A small blockage in the sink while draining the machine can cause flooding of the neighbors. Often, due to vibrations while draining the water, the “hook” falls to the floor, which can also cause a serious flood.

Draining water into a bathtub or sink

• Siphon connection. To make the drain from the machine stationary, you will need to purchase. It has a branch for washing machines, which should be located above the elbow of the siphon. Otherwise, suction will occur. dirty water into the washing machine. As a result, an undesirable foreign smell may appear in the device.
• Connection to the sewer pipe. This is a way to connect the washing machine directly to sewer pipe. It should have a thickness of 4 or 5 cm. For this, a sealant and an S-shaped drain hose are used. The hose is inserted into the pipe so that it does not come into contact with sewage. top the hose is placed at a height of 55 cm from the floor.

Connection to the sewer pipe

Washing machine power supply

Work on connecting the machine, it would seem, is completed, but only one remains important detail– power supply.

Advice. Operate preferably a three-wire outlet. Protect yourself and ground the switchboard.

If you need an extension cord, use only one that has a ground connection.

Washing machine connection diagram

A good option would be to connect the device with a separate wire from the electric meter. On it is installed automatic protection. If such a wire has not been run, then a portable RCD can be used.

Connecting the washing machine to communications is a simple matter, but requires attention. Of course, it is better to leave it to professionals who will take care of all the moments in order to further secure the operation of the device. Do-it-yourself installation involves many risks, but if you are ready for them, then get to work.

Installing and connecting the washing machine: video

How to connect a washing machine: photo

Garden irrigation system important element cottage improvement. By organizing good system irrigation, you can save a lot own forces and time.

In most cases, especially in old dachas, the irrigation system is organized using hoses. Those. there is a central water supply, to which hoses for irrigation are connected. The main problem in this case is connecting the hoses to the central water supply, this applies to both hoses modern type, and traditional rubber armored hoses.

The problem lies in the fact that, as a rule, country water supply is made of metal pipes. In addition, in old dachas, various homemade adapters, which do not fit in diameter, both for new hoses and for traditional rubber ones.

Fig.1.

In addition, a big problem is that it is often very difficult to unscrew these adapters. From this moment, the main work begins on connecting the hose to the country water supply.

There are several ways to expand a stuck thread.

• Hit it with a hammer different parties. This method works well for non-old threaded connections, i.e. which are only a few years old.

• You can use a gas burner and warm up the threaded connection. But there is a drawback, you must have gas burner or blowtorch.

• Also exists universal way is to cut the adapter. To do this, the grinder makes several cuts, after which the adapter is easily removed from the outlet.

Fig.2.

Here you should pay attention that first a transverse incision is made to make the adapter as short as possible, and then several longitudinal ones. When making an incision, care must be taken not to cut through it and cut the thread, thus not spoiling the elbow.

Fig.3.

After the cuts are ready with a chisel or a conventional screwdriver, the adapter is removed from the outlet.

During all these operations, it is important that water does not flow from the pipe. She can get on the grinder, which is fraught with electric shock.

Fig.4.

As you can see from the photo, everything turned out to be done quite neatly without damaging the outlet. Now you need to screw on the tap and connect the hose for irrigation. Why did you decide to install a new faucet? The fact is that old faucet although he holds, but he does not have a lamb and he is very tight. It is not possible to replace it with a new one, because. it is not possible to unscrew it for the reason described above, and it cannot be cut off, because pressurized plumbing system. Therefore, it was decided to simply screw on a new tap, and replace this one in the fall, when the water will be turned off.

At this stage, the following problem arises. The new tap will not screw on the old thread. The fact is that the thread is partially rotten, partially contaminated. The solution to this problem is simple, you need to "drive" the old thread. For this it is convenient to use special device for cutting pipe thread.

Fig.5.

In general, cutting pipe threads is quite problematic, especially without special tool. In this case, the device is homemade, made according to sketches from a pipe threading tool. It is desirable to have such a tool on hand for suburban area he often helps out in such situations.

If there is no special tool at hand, then cutting the thread is very problematic, but updating the old thread is not difficult. You can use a plate. You can also try to remove rust with a wire brush and WD 40. WD 40 softens rust well.

Fig.6.

In this case, I used WD 40 as a threading lubricant.

This is what a homemade pipe threading tool looks like.

Fig.7.

After the thread is cut, it is necessary to wind up and screw on the tap. Traditionally, winding is done with flax. In this case, the winding was done with a fuma tape. Firstly, flax was simply not at hand. Secondly, over time, flax absorbs rust and becomes, as it were, a single whole with a threaded connection. As a result, in the future, if necessary, it will be problematic to unscrew this valve.

Fuma tape, unlike linen, does not absorb water and rust and does not "grow" with the thread. Therefore, removing the tap if necessary will not be a problem, for example, for the winter. In addition, given the low pressure in the country water supply system, the fuma tape will perfectly cope with leaks.

Fig.8.

So, we wind the fuma tape on the thread in one layer. This is enough to create a tight connection. I start winding the fuma tape from the beginning of the thread clockwise, because. the faucet will also turn clockwise. This winding direction will not allow it to wrinkle or move, which is very important for the tightness of the threaded connection.

Fig.9.

The winding is ready and you can screw on the crane.

Fig.10.

The crane with a little effort is screwed on by hand. And put in a comfortable position. For reliability, it can be slightly tightened with a key. In general, water taps should not be tightened too much. Tightening force does not affect tightness. The tightness is affected by the density of the winding.

If a water faucet pull, then, firstly, it may burst, and secondly, it will be difficult to turn it off in the future. Therefore, if during the installation of the tap a non-tightness of the threaded connection is detected, then it is necessary to remove the tap and make a tighter winding, and not try to tighten it more.

Fig.11.

Now you can proceed to connect the hose for irrigation. I purchased a rubber armored hose for irrigation. Why my choice fell on this type of hose I will tell at the end of the article.

The main criterion for connection is simplicity, both connection and disconnection. For these purposes, a split fitting was chosen for polypropylene pipe complete with adapter for inch thread like a faucet. Branch thickness polypropylene fitting 20 mm, just equals the inner diameter of the hose. Tighten the adapter well

The convenience of using this type of fitting lies in the fact that to connect the hose to the water supply, it is enough to screw only the nut on the fitting. If you use a non-detachable fitting, then you will have to twist the entire hose when connecting, which is very inconvenient.

Fig.15.

Considering not high pressure in country water supply, the fitting nut can be tightened simply by hand without the use of a wrench. The main thing is not to forget to install the gasket.

In conclusion, as I said a few words earlier, why the usual rubber hose and not modern. The fact is that, even though the rubber hose is less convenient to use, it is heavier, it has a larger diameter compared to a modern hose of a similar cost. Accordingly, the flow of water through such a hose will be greater. This is true at low pressure in the system. As a result, using a rubber hose for watering, watering itself is carried out much faster.