The strongest remedy for sewer blockages. What is the best tool for cleaning sewer pipes: the look of a plumber. Removing clogs with chemicals

Cleaner sewer pipes picking is not easy. To date, there are hundreds of manufacturers who want to enrich themselves at the expense of gullible buyers and produce a lot of all kinds of chemicals. But, unfortunately, even half of them are completely useless.

The result also depends on right way using a pipe cleaner. The instructions on the packaging are not written at all for beauty, and if you do not read it carefully, then you can do something wrong, and there will be no sense from your actions. Always read the instructions for use, even if you think that you know everything and will not read anything new there. Even if you are using this product for the tenth time . Spend an extra five minutes, and in case of failure, you will definitely be sure that the reason is not in you.

In our article we will consider the most popular and effective means for cleaning sewer pipes, and also give a couple of tips for their use.

Folk remedies for cleaning sewer pipes

Folk remedies for cleaning sewer pipes at home are popular to this day. Not everyone wants to spend money on expensive chemicals, but some folk ways are very effective and can give odds to hyped household chemicals. Let's take a closer look at each of them.

Boiling water. This method of cleaning the sewer was used by our grandmothers. Its essence is as follows: draw water into a bucket and put it to boil. After that, pour water into the drain hole at a right angle. This should help keep the pipes clear of clogs and allow water to flow through them better. You can repeat this procedure 2-3 times to be sure.

Soda. Here you will need a pack of ordinary soda. To use it to clean the sewer pipe - pour soda into it and after about five minutes gradually pour vinegar into it. This method is the most effective, as it allows you to get rid of fat growths inside the pipe.

The drain hole should be closed for a while so that the resulting foam does not come out. After a while, pour water into the pipe to flush it out. This solution is the best folk remedy for cleaning sewer pipes at home.

Household chemicals

Household chemicals sometimes help fix even the most hopeless problems with cleaning sewer pipes. Of course, it is quite expensive, but effective.

There are two types of household chemicals: loose and liquid. Bulk products are sold in special bags, the composition of which is designed for single use. Such products are very often toxic, and when using them, there is a risk of damaging the pipe. Liquid products are much safer in this case. They are not as toxic and are easier to wash off after use. Which of these types of pipe cleaners is the most effective is up to you, since it all depends on the degree of contamination of the pipes, their composition and how the product is used.

And now let's get acquainted with the most popular means for cleaning sewers in our time, find out their composition and method of application, and also choose the best.

As you can see, the choice is quite large. The means given in the table are far from full list household chemicals intended for cleaning sewer pipes. You can call a plumber if you have any serious problems with pipes, it will help you save great amount time and nerve cells. But if you " toughie”, We recommend trying to get rid of the problem by cleaning the pipes with your own hands using improvised or professional tools.

It is recommended to carry out such cleanings at least once a month to prevent sewer blockages. It is also necessary to observe the elementary rules for the operation of sewer pipes, to prevent the ingress of foreign objects not intended to be disposed of in this way.

We hope our article helped you decide on the choice of sewer pipe cleaner.

From time to time, all property owners are faced with the problem of poor patency of drains in sewer pipelines. In order not to have to often call a plumber, it is necessary to periodically use special means for cleaning pipes from blockages for the purpose of prevention. They will not only clean the sewage disposal system, but also disinfect it.

Release form

On sale you can find such types modern means to help deal with blockages:

• liquid formulations;
• thick gels;
• granulated preparations;
• powders.

The properties possessed by this or that means for cleaning pipes and sewers do not depend on the form of release. It affects the usability of the product.

In the event that the drain is filled with water, it is better to give preference to the gel. They are specially made in a thick consistency. They are poorly soluble in water. The gel should be squeezed out into a drain filled with water, then it will slowly settle down and fall into the area where its action is required.

As for liquid means for eliminating blockages in the sewer system, it is most convenient to pour such compounds into the drain - this is done carefully, avoiding splashing. True, you need to remember: they may contain caustic components that can harm the condition of ceramics, enamel and even stainless steel.

Granular preparations are also convenient to use, since they are free-flowing and evenly distributed over the surface to be cleaned.

Purpose of sewer cleaning products

Manufacturers produce three main groups of these products:

1. To eliminate fatty plugs. This tool should be used when the drain in the kitchen sink is clogged.
2. To dissolve hair. In the event that the drain in the bathroom is clogged, this will be the best choice.
3. Universal application. This tool is recommended to be used when it is difficult to determine what the blockage consists of, since it was formed in a common sewer pipe. Most likely, it contains both hair and fat deposits.

It is necessary to familiarize yourself with the purpose of this or that remedy, since the correct choice depends on how quickly the problem will be fixed.

Variety of constipation remedies

Going to the store to search good remedy from blockages in pipes, you can see a large assortment this product. Some of them are more expensive, others are quite cheap. But in this case, expensive products may not be the best. Among the funds offered to consumers are found budget options, capable of excellently coping with the elimination of blockage formed in the sewer pipeline.

The main purpose of all chemical compositions for sewer cleaning - prevention. Plumbers recommend that within a month, at least once, treat the drain points with the product you like. As a result sewer system will function without problems.

Also, treatment with drugs should be performed when a deterioration in the flow of waste water is detected. If she began to leave slowly, you need to fall asleep or pour the remedy. The problem will disappear and then there will be no need to contact a specialist.

Quite often, compounds from blockages in pipes help to eliminate severe pollution, but not in all cases. The reason for such a poor effect from the use of the product is not always its poor quality, but the fact that it is not able to dissolve the cork.

For example, during repairs, rags, small pieces of construction waste, etc. fell into the sewer. All this can be removed from the pipeline, but only mechanically and even in this way it will be difficult to do so. Eliminate these contaminants with special devices, for example, a plumbing cable.

Before contacting a plumber for help, you should apply a blockage cleaner. The range of these products in domestic stores is huge.

Powder "Floop" for cleaning pipes

Sold packaged in bags weighing 60 grams. It is produced in two types. In the first option, the product in green packaging must be poured cold water, and in the second option (red package) - hot. The powder belongs to the universal sewer cleaners, as it dissolves fats and hair plugs, and also corrodes organic matter. "Floop" can not be used to clean the toilets.

Pour this powder only inside sewer riser so that it does not get on the bathtub, sink. The cleaner, even when dry, is extremely toxic, so gloves and protective clothing should be worn when using it.

The contents of the package are poured out, filled with water and waited for 15 minutes. During the reaction, it is necessary to ensure ventilation of the room, do not bend over the drain and inhale the fumes.

Turn on after 15 minutes cold water and wash the drain. The cork should eventually dissolve. If this does not happen, the tool can be reapplied. It is not recommended to use "Floop" for the third time in a row. Usually one sachet is enough.

Bugs "Pothan" from blockages

It is a universal granular agent that eliminates blockages in pipes. Is different active action and high concentration. To use it, water is removed from the drain so that there is about 5 centimeters of dry pipe.

The granules are carefully poured and filled with a small amount of water. At the same time, the arm is held outstretched, and the head is turned away from the drain.

Universal drug "Mole"

Products for clearing blockages under this name are sold in the form of granules, liquid, gel in plastic bottles. "Mole" fall asleep or poured directly into the drain. When working with granules, they are filled with water, their heads are turned away and air is not inhaled. Wash off after 1-2 hours.

Tiret Turbo (Tiret Turbo)

Available in the form of liquid, gel, granules. One bottle should be enough for 2-4 applications. According to the manufacturer's instructions, Tiret is poured into the drain, left for 5 minutes and then washed with a large volume of water. Consumer reviews about this tool are ambiguous, since it helps one well, while others note its low efficiency.

Everyone who used Tiret talks about the presence of an unpleasant odor that is released when cleaning the sink in the kitchen. Possible reason such a phenomenon is the dissolution of fatty deposits or organic sediments. In addition, the cleaner has a high price and a large amount of product is required to eliminate the blockage. Of the advantages, only the presence of a cover with special protection from small children.

Mister Muscle

A candidate for being called the best sewer cleaner, according to housewives, is "Mr. Muscle", produced in granules.

The cleaner is very effective and able to cope with difficult plugs, it corrodes everything except metal, but it does not damage the pipeline and siphons and does not have strong odor.

The granules are poured into the pipe and only then poured with cold water, they wait 1 - 2 hours, sometimes the time is increased, for example, leaving the product overnight.

The use of anti-clogs in pipes

When using sewer pipe cleaners, remember that they are chemically active compounds and must be handled with extreme care. Before use, carefully read the instructions on the packaging of the product.

1. Open windows and doors, turn on ventilation.
2. put on rubber gloves and goggles.
3. Avoid contact with skin.
4. When pouring granules and powders, pouring gels and liquid formulations, keep your arm outstretched. Keep your head away from the drain where the cleaner is poured. In the absence of a respirator, try not to breathe. When you want to pour water, do it without breathing and with your hand outstretched.
5. After the start of the reaction, do not lean over the drain hole, and leave the room.
6. When flushing pipes, first start up the water in a thin stream so as not to splash the product.

All of the above measures must be followed. All cleansing compounds, as well as other household chemicals must be hidden in a place where children cannot reach. Even empty packaging from products emit a strong harmful odor, so they should be immediately thrown into the trash.

How to keep pipes intact?

Of the chemicals listed above in the article, only Flup can sometimes dissolve individual elements of the sewer system, such as a corrugated hose or a siphon glass. True, the destruction of plastic is possible if the time allotted for the action of the agent is exceeded.

To exclude the possibility of damage to the sewer. The product manufacturer's recommendations must be followed. If after the initial processing the plug could not be eliminated, you can try again, but if there is no manufacturer's prohibition on this. In some cases, the blockage may be far away in the pipeline and then a cable cannot be dispensed with.

Use of funds in private houses with septic tanks

In order not to affect the quality of wastewater treatment, it is necessary to add bacteria from time to time - the colonies will then begin to multiply. The recovery will take about a month or more. And if at this time the sewer is clogged, what to do?

In this case, experts suggest not using pipe blockage products, but pouring bacteria into the system for cesspools. The solution is prepared according to the instructions and then poured into the sewer, after which it is advisable not to use it for a day. During this time, deposits in the pipes will be processed by bacteria, and the pipelines themselves will not be affected.

In order to quickly solve the problem with sewer blockage, it is necessary to use an effective tool for cleaning sewer pipes. However, in order to select it, acquire it and quickly establish the normal process of functioning of life support systems modern dwelling, it is desirable to have an idea of ​​​​how the pipe cleaner works. We will talk about this in our article using the example of the most famous brands.

"Mr. Muscle" - a wonderful tool for the prevention and elimination of light blockages

This tool in the form of a gel and foam is designed to clean the walls of pipes, eliminate blockages (copes with food debris, hair). Another of his actions bad smell from the sewerage is eliminated due to the destruction of bacteria living in the pipes. According to users, foam copes with problems more effectively than gel.

When using the Mister Muscle product, there are no differences - pour the product into the drain hole, add water, wait and rinse with water. For prevention and in case of light blockages, this remedy is very effective.

If the sewer pipe is clogged, then you should always be very careful and strictly follow the instructions set out in the instructions.

Advice: It is especially important to withstand exactly the time that is recommended for the use of a particular agent, since the action of chemically active substances has a beneficial effect strictly within the specified time, and in the future it can be harmful.

"Bagi Pothan" - effective, but quite dangerous

Cleaning sewer pipes from grease can be effectively carried out with this tool. In addition, it removes hair, limescale, leftover food, paper, etc. When working with it, you must:

• use protective gloves
• make sure that the product does not get on the skin, clothes and on the surface of the sink, bathtub, walls and floor.

"Pothan" - an effective remedy in granules

When using Potkhan, the following actions are carried out:

1. Water is removed from the sink, not only from above, but also below the drain (at least 5 cm).
2. Up to 100 g of the product is poured into the hole.
3. Wait 3 min.
4. Pour a glass of hot water.
5. Hold again for 3 minutes.
6. Followed by washing running water but not cold, but warm.

This sewer pipe cleaner, according to customer reviews, has a very high efficiency, however, its disadvantage is the relatively high cost. When working with it, you need to pay attention to the following:

1. If you violate the rules for its use, you can easily get a chemical burn.
2. If, eliminating the blockage, it is decided to use this particular tool, then care must be taken to include forced ventilation or creating conditions for enhancing natural ventilation.

Is Tiret really the best remedy?

According to the instructions:

1. It is necessary to pour "Tiret" into the drain hole of the bathtub or sink.
2. Hold for 5 minutes, in case of complex blockage - up to 30 minutes.
3. Rinse thoroughly with high pressure water.

Consumers express different opinions about the effectiveness of this tool. Some people really liked his performance. Sometimes it is used, increasing the exposure time to 8-10 hours (all night), however, in this case, everyone will be forced to take on the risk of complications.

"Floop" - effective with strict safety rules

Fluop granular product can be purchased in 2 types - for use with cold and hot water filling. The reaction rate is higher in the second case. The application is carried out in accordance with the instructions in this way:

1. Pour the powder into the drain hole.
2. Pour hot or cold water - the contents in the drain begin to hiss.
3. Wait 3-15 minutes before rinsing with water.
4. Washed with water in large quantities.

Food residues, fat, collagen fibers, limescale - all this is effectively removed when using Fluop. When working with this drug, it is important to be especially careful, use rubber gloves, avoid cases of contact with skin and clothing, and carefully protect your eyes. Consumers speak well of the Fluop preparation, thanks to which flushing of sewer pipes is carried out quite easily and quickly.

"Mole" - the most popular means

Means domestic production"Mole" has long been in high demand. If the pipe is clogged, then when using the "Mole" tool, perform the following steps in sequence:

1. Pour the product (40-120 ml) into the drain hole.
2. Leave for 2-3 hours (the instructions may indicate a shorter exposure time depending on the active ingredients and their quantity).
3. Flush pipes with water.

"Mole" effectively eliminates fat and food debris, as well as collagen fibers. In addition, when using it, an unpleasant odor is eliminated. Its use as prophylactic turns out to be very useful.

It is worth noting that "Mole" is released different manufacturers. The products differ slightly in the content of active substances and, as a result, require different application times. This does not affect the quality of cleaning, but requires careful reading of the instructions.

For a long time, the Krot sewer pipe cleaner has been considered the most popular among consumers. It is especially important that it is very effective as a prophylactic.

Advice: So that blockages do not create problems, once every six months, any of the above means for cleaning sewer pipes should be used.

From time to time there are problems with the sewerage - the water passes through. You won’t call a plumber every time - you have to wait a long time for them. In this case, the way out is to periodically use a remedy for blockages in the pipes. Processing takes a little time, and in return you get a properly functioning sewer without unpleasant odors. This is like a bonus that you get when processing the “right” compounds. They also disinfect the insides of the pipes.

Forms of release and purpose

• liquid;
• thick gel;
• in powder form;
• granulated.

The release form does not affect the properties. More it affects the usability. If the drain is filled with water, it is more convenient to use gels. They are specially made dense, poorly soluble in water. If you squeeze such a gel into a drain filled with water, it will gradually settle down. And it will be just in the zone where it is necessary to act.

Which tool is more convenient

It is more convenient to pour a liquid remedy for blockages in pipes into drain holes. It can be carefully poured inside without splashing. It's just that there are very caustic compounds. They damage enamel and ceramics. They can even damage stainless steel.

It is also convenient to use granules - they are quite loose, evenly distributed over the surface. They are often more convenient to use than powder formulations. All this is true, but when choosing a sewer pipe cleaner, pay more attention to its properties. The release form is secondary.

By appointment, there are three groups of compositions:

• To dissolve fatty plugs. They should be used if the drain in the kitchen does not work.
• To dissolve hair. This perfect choice if the bath is clogged.
• Universal. Good in situations where it is not possible to identify what the blockage may consist of. It is found in a common sewer pipe and most likely contains grease and hair.

These are the properties that you should pay attention to first of all. From right choice depends on how quickly you get rid of the problem.

Most popular means

There are many on the shelves different means. One is more expensive, others are mere pennies. In this case, more expensive - not always - better. There are very budget options that do a very good job of cleaning sewer pipes.

Flup

Powder product packaged in bags of 60 grams. There are two types - filled with cold (green packaging) and hot (red bags) water. This universal cleaner for pipes, corrodes organics, fats, copes well with hair plugs. It is forbidden to use for toilet bowls.

Means for cleaning pipes "Floop" - high efficiency at a low price

Pour only into the drain, trying not to get on the sink, bathtub or sink. The powder is highly toxic even when dry. It is necessary to work with him in gloves and protective clothing. Pouring out the bag, pour water, wait 15 minutes. During the reaction, turn on ventilation, do not lean over the drain, do not inhale fumes. Rinse afterwards with cold water. The cork should dissolve. In extreme cases it is possible reuse facilities. The third time is not recommended. Reviews about Flup are positive, high efficiency, low cost, ease of dosage are noted - usually one sachet is enough. Among the shortcomings - toxic fumes, also corrodes in some cases plastic siphons(not always, apparently some kind of plastic).

Bugs "Pothan"

Granulated universal remedy from blockages in pipes. Very active and concentrated. Water must be removed from the drain so that there is about 5 cm of dry pipe. The granules are carefully poured inside, poured with a small amount of water. Do everything with an outstretched hand, turn your head away from the drain. Wait for 3 minutes, then rinse with water.

"Bagi Pothan" - a fast-working remedy for clogged pipes

The reaction is violent with the release of foam and toxic gases. It effectively dissolves blockages located near the drain. The granules simply do not get deep. Among the shortcomings, its high price compared to other means and a very poisonous smell were noted.

Mole

Universal tool for clearing pipe blockages, granules are available in bags, liquids or gels in plastic bottle, falls asleep / is poured into the drain. The granules are filled with water (during operation, turn away and do not inhale). Leave on for 1-2 hours, then wash off.

Means for cleaning pipes "Mole" - the most popular, has many forms of release, it is produced by different companies

In many reviews, the Mole pipe cleaner is called the most effective. It will dissolve most of the blockages, and at the same time has the most low price compared to analogues. Flaw - long time impact, which is not always easy to organize. This tool is one of the leaders in its field, many of the consumers consider it the best.

Tiret Turbo (Tiret Turbo)

Liquid, gel or granules in a bottle. One bottle is enough for 2-4 times. It is poured into the drain, the manufacturer recommends leaving for 5 minutes, then rinse with plenty of water. If we talk about the reviews, they are ambiguous. One tool helps, others - categorically not. Reviews are divided roughly in half.

What everyone notes is a very unpleasant smell that stands out in the kitchen. Perhaps this is due to the dissolution of fat or organics. Another thing everyone notes - high price and high expenditure. Of the advantages - only the lid with child protection (you can open it only by pressing hard on the lid).

Candidate for the title of "best remedy for blockages in pipes" - "Mr. Muscle" in granules

According to reviews, it is very effective, it works even with very difficult traffic jams in pipes, corrodes everything except metal (fat, hair, organic residues), but it does not damage pipes and siphons. As a positive point, the absence of a strong smell is noted. It is almost imperceptible while the granules are dry, and then during the reaction it remains hardly noticeable.

According to many - Mister Muscle - the best of the tools for cleaning sewer pipes

The granules are poured into a pipe without water, filled with cold water. According to the recommendations, they must be kept for 1-2 hours, but often the period is significantly increased (left overnight, for example).

Mechanical cleaning cannot be replaced with powder

As plumbers say, all chemicals are preventive. In this they have no equal. Regularly, about once a month, clean with the composition you like, and the sewer will work without problems. From the experience of other users, it must be said that the treatment should be carried out even when the flow deteriorates. We noticed that the water leaves more slowly - fill in / fill in the product. The problem will go away and there will be no need to call a plumber.

Sometimes pipe blockage products can help with severe blockages, but not always. And this is not because the composition is bad, but because this species the blockage simply cannot be dissolved. For example, blockages after repairs, rags that got into the sewer (sometimes they can corrode, but rarely), pieces of metal (beer cans, spoons, forks, etc.). All this can only be obtained mechanically, and that will be very difficult. If, in the presence of a similar cork, one of the chemicals is poured into the pipes, it will dissolve the fat that has settled on the pipes, it will settle on the cork and turn it into a monolith. It is very difficult to remove such pollution. Only by prolonged “picking” with a plumbing cable.

Handling rules

All means for cleaning sewer pipes - active chemical substances. You have to handle them very carefully. Before use, be sure to read the instructions on the package. There are usually prescribed all the required measures to protect your health. They may differ slightly, but in general they are standard:

All of these recommendations are mandatory. Also, all these funds must be kept in a place where children cannot reach. Even containers (bags or bottles) emit a very strong chemical smell, so if possible they should be taken out immediately.

How safe for pipes

Recently, cast-iron sewer pipes are being installed less and less, it is widely used plastic plumbing and sewerage. Manufacturers of pipe cleaners are aware of these trends and are developing formulations so that they do not damage plastic. Of all the above compositions, only Flup in some cases dissolves plastic parts (siphon glasses or corrugated hoses), with other brands of such troubles do not happen. Although, it is possible that the destruction of plastic occurs with an increase in the recommended exposure time (for Flup it is 15 minutes).

To secure the elements of your sewer system, follow the manufacturer's recommendations. If after the first treatment the cork has not gone away, you can try to do the same a second time, and then if there is no manufacturer's ban. Sometimes the blockage in the pipe does not dissolve because it is far away in the pipe. Then you must either use a cable, or try to "push" the active substance further. To do this, after the agent has been poured into the pipes, they take a plunger and “pump” the contents several times. During the "pumping" we focus on pushing further (press the pear down sharper).

How to be the owners of private houses with septic tanks

What is the difference between the sewerage of a private house? The fact that the effluents go to or, and in them the processing takes place with the help of bacteria. After descending into the sewer a large number active chemistry microorganisms die. After that, the quality of cleaning drops significantly. You have to fill in the bacteria again and wait until the colony multiplies. This takes a month or more. What if during this time the sewer clogs again? Repeat all over again? It is unprofitable, and the smell on the site appears characteristic.

There is another solution. Do not use the traditional remedy for blockages in pipes, but pour bacteria for cesspools into the sewer. The solution is prepared according to the instructions, after which it is poured into the sewer. Do not use it for a day, if possible - more. During this time, bacteria process fats, plant residues and other deposits in pipes and wherever they (bacteria) end up. At the same time, neither plastic, nor metal, nor other materials suffer.

After such cleaning of the sewerage of a private house in a septic tank or autonomous sewerage no problem. The bacteria live there are similar, so it's a wonderful way. It may not take a major blockage, but it will cope with the deterioration of the flow for sure. One important point: bacteria work at positive temperatures - from + 5 ° С.

Sewerage in the house performs a very important function. While the system is functioning properly, few people think about its operation. But the blockage that has formed, which slows down the drainage of water or makes it impossible, makes you urgently remember about possible ways pipe cleaning. Of course, you can turn to specialists to eliminate the blockage, but many prefer to deal with the problem on their own, using chemicals for cleaning sewer pipes.

If it is better to involve professionals to clean the chimney, then you can deal with a blockage in the drainage system yourself. There are many ways to clear a clogged sewer line.

You can use a plunger or a cable, but many people prefer to use a chemical pipe cleaner. The advantage of this method is its simplicity, the owner requires a minimum of effort.

In addition, chemical drain cleaners will allow cleaning without getting your hands dirty. When using it, it is not necessary to disassemble the system and remove dirt from the pipes. Consider which tool should be chosen for cleaning and how to use it correctly.

Causes of blockages

The formation of blockages can be caused by various reasons:

• Improper use of sewerage, large debris enters the pipes - rags, plastic bags, etc.
• Accumulation of sediment on the walls of pipes. In the process of use, a deposit of fatty deposits and soap residues gradually forms on the sewer pipes. Gradually, the thickness of the sediment layer increases, and the passage of the pipe narrows, which leads to a violation of the outflow of effluents.

Advice! To avoid clogging due to sediment accumulation, it is recommended to clean the pipes regularly using preventive measures.

• Corrosion in pipes. If the house has an old sewer system assembled from cast iron pipes, the cause of frequent blockage may be corrosion of pipes. With time inner surface cast iron pipes become more and more rough, so various debris lingers on it, which leads to the formation of blockages.

Advice! If the cause of blockages is old, worn out pipes, then the best way out is to completely replace the system.

• Design and installation errors can also lead to blockages. It is possible that the pipes were laid at the wrong angle, or pipes of a smaller diameter than required by the norms were used during installation. This is the most difficult cause of blockages to eliminate. The only effective way out will be a complete rework of the installation of the sewerage system.

Thus, before choosing the best sewer cleaner, you should think about what caused the accident. For example, if the blockage was formed due to a rag that got into the pipe, then the most effective solution would be to use a plumbing cable.

If blockages are formed due to design or installation errors, or due to pipe wear, then the problem can be temporarily solved using mechanical or chemical method cleaning. However, to achieve a radical solution to the problem, pipe replacement will be required.

Most efficient use chemical cleaning agents turn out to be if the cause of the blockage is an increase in sediment on the walls of the pipes. The pipe cleaner used will help restore system operation.

Using "home" remedies

You can eliminate a small blockage of sewer pipes with your own hands using improvised means without spending money on the purchase of special preparations. How to clean the system without buying chemicals?

The use of boiling water

The easiest way to clean the sewer pipe is to flush the system with boiling water. To use it, you need to boil a bucket of water and pour boiling water into the sink. If the sediment layer on the pipes is small, then such treatment will be sufficient.

Soda cleaning

Can clean sewer pipes folk remedies. An easy way to get rid of a small layer of plaque on pipes is to use baking soda and table vinegar. These substances are in almost every home. The work is done like this:

• Half a standard pack of soda should be carefully poured into the drain of a sink or bathtub.
• Then there you need to pour a glass of ordinary table vinegar.
• The interaction of these two substances gives chemical reaction neutralization. During this reaction, most of the sediment on the walls of the pipes will be destroyed.
• After the release of foam stops, you need to rinse the pipes with water, that is, just open the water supply tap (preferably hot).

Use of special tools

Minor blockages can be dealt with at home, but if the situation is more serious, it is better to purchase special agent for cleaning pipes. Let's figure out what drugs exist and how to choose the best remedies for cleaning pipes.

Funds classification

According to the form of release, two groups of funds can be distinguished:

• Bulk - granular or powdered. These products are usually packaged in foil bags, one bag is designed for one application.
• Liquid or gel. These funds are considered safer. They are better washed out, so the risk of adverse effects on the pipe is reduced.

Depending on the main active substance, two groups of drugs can be distinguished:

• Alkaline funds. Alkalis are great at dissolving grease, so these products are well suited for use in kitchens.
• Acid agents. Acids are great for removing soap scum and dissolve hair, so such drugs are best used in bathrooms.

Overview of the most popular tools

Today, manufacturers offer a wide range of products for cleaning sewer pipes. Consider the most popular drugs:

• Mister Muscle. Under this brand, a whole line of effective pipe cleaning products is produced. This is a granular product, and gels, and foaming liquids. Among the funds you can find preparations intended for preventive cleaning, as well as more powerful remedy anti-clogging, the use of which allows you to dissolve a dense plug of sediment in the pipe.
• Tiret. This effective cleanser is widely advertised, so many have heard of the drug. The series produces drugs for the prevention, elimination of small blockages and emergency assistance in emergency situations when the water does not go down the drain at all.

• Pothan. The tool is universal, it will clean the sewer pipes from grease, lime and collagen deposits. It must be remembered that Potkhan is professional tool, it is highly concentrated, so when working with it, you need to be careful, hands should be protected with rubber gloves.
• Flup. This product is available in granules. The line contains two versions of the drug, the first is intended for pouring with hot water, when using the second, you can use cold water.
• Mole. This is the most famous sewer cleaner, it has been produced for over 50 years and has managed to gain a strong reputation among consumers. The tool is produced by several manufacturers, so it may vary slightly in composition and exposure time. Therefore, before use, you must carefully study the instructions.

Standard instructions for the use of special tools

When purchasing a special tool, you must carefully read the instructions in order to know exactly how the sewer is cleaned. You need to make sure that a preparation is selected that is suitable for use with the type of pipes that are installed in the apartment. standard instruction on the use of drugs looks like this:

• First of all, you should take care of security. It is necessary to improve ventilation (open a window or turn on an exhaust fan), put on rubber gloves on your hands, and protect your face with a medical mask.
• Now you need to decide on the dosage by measuring right amount drug.

Advice! As a rule, manufacturers produce drugs in packaging designed for one use. If the product is purchased in a large container, then you need to carefully measure the desired dose.

• If the selected drug is liquid or gel-like, then the measured dose of the drug is poured into the drain. In the event that the drug is dry, then it is carefully poured into the drain, after which 1-2 glasses of water are poured after it.
• Now you need to withstand a certain time (the exposure time is indicated on the package).

Advice! It is not recommended to increase the exposure time at your own discretion, as this may adversely affect the condition of the pipes.

• The last stage is flushing the system with water; to carry it out, you need to open the water supply tap for 10-15 minutes.

Used to clean sewers different ways. The choice of the most effective depends on what caused the blockage. Special chemicals effective in the event that the blockage is formed by accumulated sediment on the walls of the pipes.