Ennobling the area surrounding Vacation home, many owners provide in the project landscape design the presence of a reservoir. The place and size of the future decoration of the site are selected based on the capabilities of the owner and the area of ​​land ownership. The future pond may look like a small pond surrounded by ornamental plantings, near which it is pleasant to sit in hot weather. A large plot can serve as a place for a larger pond that can become a favorite place for swimming not only for kids, but also for adult family members.

Pond waterproofing scheme open field: 1 - Base, 2 - Subbase, 3 - Mechanical fastening, 4 - Weighting agent, 5 - Primer, 6 - Reinforcing layer, 7 - Rubber coating.

In order for the device of the reservoir not to become the reason for the transformation of the site into a swampy area, in without fail pond waterproofing is necessary, regardless of its size.

Plastic container - the easiest way to waterproof

The only option when there is no particular need for a waterproofing device is the installation of a plastic container. The material from which the container is made is itself a reliable waterproofing. However, in this case, another problem arises - after severe frosts, the material may become cracked.

Although there is a sale a large assortment plastic containers for creating reservoirs, it can be difficult to choose a design that is suitable in shape and depth. Change design finished pond plastic is no longer possible. But when using plastic mold It doesn't take long to create a reservoir. It is only necessary to dig a pit of the appropriate shape and depth and install a water tank in it.

The bed for installing the container should be 20 cm larger along the contour of the form, and 5 cm will need to be added to the required depth to fill the sand on the ground. Before backfilling with sand, the soil must be cleaned of roots and stone, and then carefully compacted. To improve waterproofing, in case of damage to the plastic mold, you can cover the soil with a layer of geotextile.

The main advantage of using a plastic container is the speed of its installation, a variety of shapes and various possibilities for its use. The disadvantages can be attributed not too long term services and the impossibility of changing the shape of the purchased product.

Back to index

concrete waterproofing

The use of concrete for waterproofing water bodies is traditional way when creating on suburban area ponds for various purposes. The service life of a well-made reservoir, the waterproofing of which is made of concrete, is estimated for decades. It is especially convenient to use concrete when creating large reservoirs, which the owners of the site often use not only as a pool, but also breed fish in it.

Of course, so large-scale work it is better to entrust professionals, however, it is quite possible to perform the concreting of the reservoir yourself. In order for the waterproofing to be performed qualitatively, a certain work procedure must be followed. Violation of technology can lead to the fact that instead of a wonderful place to relax, a wetland area of ​​\u200b\u200bthe adjacent area will be obtained.

Scheme of the pond pit: 1 - Pit; 2 - Waterproofing; 3 - First concreting; 4 - Fittings; 5 - repeated concreting.

It is desirable that all work on concreting the walls and bottom of the future reservoir be completed during the day. If the pond is made for breeding fish, then its surface, after readiness concrete pavement, it is better to cover liquid glass, since the presence of concrete chips in the reservoir is dangerous.

Consider the technology of creating a reservoir with concrete waterproofing in the order of the stages of work.

The creation of reservoirs, where the waterproofing is made of concrete, begins with earthworks. the walls of the pit are given a slope of about 45 °, then the soil, cleared of stones, is carefully compacted on the walls and bottom.

The next step will be laying a thick polyethylene film over the entire inner surface of the pit. Then the surface of the polyethylene film is covered with a layer of concrete at least 10 cm thick. concrete mortar not hardened, reinforcement is laid. As reinforcement, a metal mesh is perfect, which is pressed into the base of the concrete wall.

The reinforcement is closed with the next layer of concrete. The thickness of the finishing layer is at least 5 cm. The coating should be carefully compacted and leveled, and after it has acquired hardness, cover it with liquid glass. Now there are more modern facilities finishes - a variety of coatings made of polymeric materials. The pond, trimmed with their help, acquires an original appearance.

To create a reservoir with your own hands by concreting, you will need to take care of such materials and tools as:

• the main material selected for the waterproofing device;
• polyethylene film;
• geotextile;
• shovel and construction scrap;
• scissors for cutting film and geotextiles.

The reservoir on the site has long been a popular and common element of the decor of the territory. Many people like lakes and ponds, having a high decorative effect and pleasant aesthetic qualities. In addition to decorative functions, the pond also provides a favorable climate on the site.

To ensure the long functionality of your reservoir, during its construction it is necessary to pay increased attention to waterproofing. Good waterproofing will hold water in the pond, which will provide long years services. Excellent insulation is essential if you have sandy soil or high level groundwater deposits. There are several ways of arranging the waterproofing of a reservoir. If you make the wrong choice or make a mistake when conducting waterproofing works, the reservoir may dry up or silt up. Which method is right for a particular reservoir depends on several factors: on the size of the pond, on its shape, on the purpose of use, on operating conditions, and others. So let's figure it out - what methods of waterproofing a pond exist and how to do it correctly.

The easiest way to get a beautiful front lawn

Of course, you have seen the perfect lawn in the movies, on the alley, and perhaps on the neighbor's lawn. Those who have ever tried to grow a green area in their area will no doubt say that this is a huge job. The lawn requires careful planting, care, fertilization, watering. However, only inexperienced gardeners think so, professionals have long known about the innovative tool - liquid turf AquaGrazz.

The most common methods of waterproofing a reservoir are:

Film waterproofing of the pond is suitable for ponds of any shape and size. For waterproofing the pond, you can use a special waterproofing film, or you can reduce the cost of the process and use polyethylene.

1. Polyethylene - cheap material, respectively, and will serve less, it is less durable, has a low percentage of elasticity and is unstable under the influence of ultraviolet radiation.
2. Geomembrane is a special waterproofing material, characterized by good strength and elasticity. There are geomembranes with low and high density.
3. PVC film is the most common and popular waterproofing material, it is stronger, more elastic, and more durable than all the previously listed materials. It is quite possible to make waterproofing with a film with your own hands. The main thing is to choose the material good quality and prepare the pit.

The finished form of plastic is another way to waterproof water bodies. Such forms are sold in many stores, and they can be made from both ordinary polyethylene and hydroplastic. The price of the form depends on the complexity of the design, size, and volume of the pond. If the size of the reservoir is not very large, it is quite simple to install the form into the pit on your own (an example of such a reservoir is in the photo).

Concrete waterproofing is a laborious and costly process, but very common. Concrete, as a material for insulation, is strong enough and has a long service life. But the disadvantages of this material in its susceptibility to temperature regime and in the possibility of subsidence of the soil. You can make waterproofing from concrete with your own hands, but this process is quite complicated and difficult, and without the necessary experience and skill, it is also long.

Clay is another material for waterproofing work. Clay is laid on the bottom and walls of the pond in several layers, each of which is 20-50 cm.

Pond waterproofing by Sepp Holzer is a method in which an excavator compacts the soil of a reservoir where there is already water. The excavator bucket sinks to the bottom and presses hard, thereby compacting it. This method is good in that it can be used for natural reservoirs, with the threat of siltation.

Waterproofing with liquid rubber is a fairly new, but very high quality, and already popular method. Such waterproofing is great for ordinary ponds, and for pools, and even for lakes in which fish will be bred.

Liquid rubber is a material for insulation, which is made on the basis of bitumen, with the addition of stabilizers and polymers.

Waterproofing with liquid rubber occurs by spraying it onto the bottom and sides of the reservoir.

The main advantage of waterproofing with liquid rubber is the frost resistance of the material. dangerous temperature for liquid rubber, the temperature is considered below 60 degrees, and the service life of liquid rubber is 20 years.

We have listed the main methods of waterproofing work, with all the advantages and disadvantages. You just have to make a choice based on the parameters of your reservoir, soil properties, temperature indicators and personal preferences.

How to make waterproofing on your own

Choosing the right and convenient method of waterproofing for you is the floor - the case, it still needs to be done correctly. There are a number of rules and recommendations that should be followed when doing such work with your own hands.

1. Any reservoir begins with the preparation of a pit of the desired shape and size. Having carefully formed the bowl of the reservoir, you need to properly level and compact the bottom and side parts with sand. Then you can start doing waterproofing work with your own hands in the way you have previously chosen.
2. If you use a material such as a film, then first of all lay geotextiles on the sand, which will protect the film from damage by stones and the root system of trees. Lay a waterproofing film on top of the geotextile film, so that the edges extend beyond the reservoir by half a meter. These edges should be well fixed with stones, soil or rubble. Then the edges of the film can be decorated accordingly.

1. If you decide to use a ready-made container for waterproofing, then work must begin by installing this container in the pit. Doing it yourself is quite simple, but make sure that the top of the mold extends a few centimeters beyond the pit. After installing the form in the pit, pour water into it and check the correctness of the installation with a level - it is better to avoid distortions, for the integrity of the structure. The space between the soil and the side walls of the container must be covered with sand and compacted.
2. It is better not to do concrete insulation with your own hands, but to invite professionals for this.
3. And when carrying out waterproofing work with clay, it is necessary to sprinkle the bottom of the pond with ash, this will protect the reservoir from insects that live in the ground. After the ash, a layer of clay of 10-15 cm is laid on the bottom. The clay layer is well compacted, and straw is laid on top of it. After the first layer of clay has dried, the second layer is placed on the straw. Then we pour large crushed stone onto the dried clay, and ram it. After we make the next layer - from gravel mixed with sand, preferably river. To carry out waterproofing with clay, it should be remembered that the banks near your reservoir should be gentle. Clay will not stick to steep slopes.
4. Waterproofing with liquid rubber begins with laying a geotextile film on the bottom of the pit. The geotextile film is fixed with staples and a layer of liquid rubber is applied to it with a spray gun. Rubber coating of the pit is best done using a special installation. After the rubber dries, and it dries pretty quickly, you can pour water into the pond.

From this article you will learn:

• How to waterproof a pond in a country house
• How to use clay for waterproofing a pond
• What is liquid waterproofing of a pond
• What is vinylite and what are its advantages

Rare owner country house refuses to have any body of water on its site. If the area allows, then decorating the landscape with a pretty pond is only a matter of financial capabilities. Anyone will be pleased to relax near the cool water on a hot day or spend the evening there with a cup of tea. And if the pond is surrounded by various ornamental plants, then it will look just fine. On a spacious plot and a pond, you can arrange a more solid one - one in which not only children, but also their mothers and fathers can swim. The main thing to remember is that no matter how big the pond is, it needs to be looked after. Today we will talk about various options pond waterproofing.

How is it possible to waterproof the pond in the country

If a body of water, even if it is not too large and deep, is left without waterproofing, you risk turning your site into a swampy area. To prevent this from happening, it is necessary to take preventive measures.

Pond waterproofing with plastic

There is an option for arranging a reservoir, in which there is no need to deal with its waterproofing. We are talking about the purchase and further installation of a plastic container. The material from which it is made has reliable waterproofing properties. It would seem that a way out of the situation has been found: to equip the pond in this way - and all problems have been solved. Unfortunately, not everything is so simple. If in your area there are very coldy, then the material of construction may simply crack.

There are a couple of other problems, although not so serious. First, despite the fact that plastic containers for the pond are sold in almost any specialized store, it is quite difficult to find the right size and depth. Secondly, having settled on a specific option, you will no longer be able to change the shape of the reservoir. Of the advantages, in addition to the absence of the need for waterproofing the pond, it should be noted that it is possible to dig a suitable pit and immerse the container in it quickly enough.

Indeed, there are some things to keep in mind important points. So, when digging a form for installing a container in the ground, do not forget to make it 20 cm wider around the entire perimeter of the reservoir. The depth of the pit should be 5 cm more - this space will be covered with sand. By the way, before filling the sand, be sure to remove all the stones from the ground and pull out the roots, then carefully tamp the ground. If you're worried that the pond's waterproofing might be compromised by damaged plastic, cover the ground with a layer of geotextile.

Among the advantages of a "plastic" pond is not only the ease of installation, but also the ability to choose a wide variety of shapes. In addition, such a reservoir can be used for various purposes. The downside is not only that it will be impossible to change the appearance of the object. Unfortunately, the service life of such a pond is not too long.

Pond waterproofing with concrete

The most commonly used material for waterproofing water bodies is concrete. If this material is used during the construction of the facility, then there will be no issues with the duration of the operation of the pond - it will be in order for many decades. Concrete is especially well suited for waterproofing large ponds, which are used not only for swimming, but also for breeding fish.

If you do not have skills in construction business, for such work it would be better to hire specialists. But if you wish, you can do the waterproofing of the pond with your own hands. In order for the result to turn out as intended, all actions must be performed in a certain sequence and according to the rules. Otherwise, instead of a colorful reservoir, you risk getting a completely wetland.

It is desirable to concrete the walls and the bottom of the pond within one day. A reservoir intended for breeding fish must not only be waterproofed with concrete, but also covered with liquid glass, which will protect the water from concrete chips entering it.

The stages of waterproofing a pond with a concrete coating will look like this.

You need to start with earthworks, the purpose of which is to give the walls of the pit a slope of about 45 °. Remove all stones and roots from the ground, then tamp it down well - both at the bottom of the future reservoir and on its walls.

Then close all inner surface thick pond plastic wrap. Place at least a 10 cm layer of concrete over the film. Until it hardens, reinforce it with reinforcement. For this you can use metal mesh pressing it into the surface of the material.

But the waterproofing of the pond is not over. Place the next layer of concrete on the reinforcement, at least 5 cm thick. Level and compact the entire coating. After the concrete hardens, cover it with liquid glass. Instead, if desired, you can use special polymer materials. These coatings are not only considered more modern, but also look quite original.

Before you start waterproofing the pond with your own hands, make sure you have:

• material with which you want to arrange waterproofing;
• polyethylene film;
• geotextile;
• construction scrap:
• shovel;
• scissors to cut geotextiles and polyethylene.

Pond waterproofing film

If you prefer the most budgetary version of waterproofing, then it can be done using ordinary film. But its thickness must be at least 500 microns, while the polyethylene must be folded in half. As you understand, the material is not one of the most reliable, and therefore the guarantee for the operation of this kind of waterproofing of the pond cannot be long. The maximum service life in this case is not more than five years.

However, if you use pvc film, then the quality of waterproofing will be much higher. Reinforced will last even longer PVC material, which differs from the usual one by the presence of a special woven mesh inside its two layers. The PVC film has good elasticity and can be repaired. However, this material has a minus: such a film is destroyed under the influence of the sun.

Instead of polyethylene or PVC film, butyl rubber sheeting can be used for pond waterproofing, which among similar materials considered the most durable. The service life of a pond with waterproofing from such a film reaches fifty years. The work itself on arranging a reservoir with the help of butyl rubber does not present any difficulties.

Pond waterproofing with liquid rubber

Liquid rubber is positioned as the most modern waterproofing material. A pond finished in this way will be distinguished by reliability and durability. Liquid rubber has two components in its composition and is made on the basis of a polymer-bitumen emulsion. It is not afraid even of sixty-degree frosts, it is quite difficult to pierce it. Guaranteed waterproofing for ponds and other bodies of water - up to 20 years.

The technique of working with this coating is not difficult. Dig a pit right size, cover it with geotextile, which should be well fixed on the "shores" of the pond. After that, cover the geotextile with waterproofing mastic. It can be applied both manually and with a special sprayer, preferably in several layers.

After the liquid rubber hardens, a strong and rather elastic film will be obtained, repeating the shape of the pit to the smallest detail. Thanks to this, the pond will look absolutely natural, especially if you decorate it with plants. This waterproofing material is ecologically absolutely harmless.

Pond waterproofing with clay

Scientific progress has touched the most different parties of our lives, construction technology has not been left aside. If the ancient Egyptians, building their pyramids, did not attach much importance to waterproofing, then the European peoples living in a fairly cold and humid area just had to think about it. For example, to protect the underground parts of structures from moisture in the same Holland is another problem!

Time has shown that clay is the best waterproofing material, at least for the medieval level of building technology.

We can say that people are lucky that it is easy to find it in low-lying areas with high humidity soil.

In such areas, until the middle of the 19th century, a simple and at the same time very reliable building practice was used. The foundations of buildings were laid out of brick or buta, fastening the material lime mortar. An 8–10 cm layer of clay was applied on top, which, in turn, was covered with natural matting. From below, drainage was made of brick rubble. If the soil was too wet, use drainage pipes. Many cities in Europe are built in this way. If we take examples from Russia, then we can recall St. Petersburg, which was built in a very swampy area. Furthermore, great amount cellars there is below the groundwater level, but do not leak to this day.

If you look into our past even further, you can remember Novgorod. Archaeologists excavating 14th-century structures have found clay waterproofing systems underground. The cellars of many ancient buildings remain dry until the waterproofing made by the ancient builders is violated during the construction of new communications. And restore it modern methods turns out bad.

For waterproofing ponds and other structures, high-quality oily clay is best suited. Take, for example, adobe floors, which are still found in village huts. If water is not spilled on such floors from above, they will be completely dry even in humid climates.

The floors in rich houses and churches were made of brick, which was covered with a 10–15 cm layer of clay on top. Moreover, the latter was first "improved", diluting it with bull's blood, threshing with chains, dousing with pitch water or even slurry. A stone was placed on top of the floor or ceramic tiles, gluing them with the help of the same clay.

In the 19th century, compounds with stronger waterproofing properties appeared - different kind bitumen and tar. But construction technologies did not stop there, and now materials based on cement, petroleum bitumen and various polymers are used for insulation. But, be that as it may, it is too early to write off the clay completely. It is still used today for waterproofing ponds and other structures. Moreover, this happens not only in distant Russian villages, but also in many European countries.

Now, in the construction of reservoirs, in addition to clay, a film is used, but this only benefits the object, preventing the erosion of the primary protective layer. By the way, many modern waterproofing materials contain elements of clay.

For example, the American company "Akzo Nobel Geosynthetics" is known for its three-layer waterproofing mats "NaBento". Their base is bentonite clay wrapped in a geotextile shell. As soon as the sinuses of the pit are filled up, these mats expand and tightly close up all possible holes. The company's products are also used in the construction of various underground structures under difficult conditions. However, Akzo Nobel Geosynthetics is far from the only company producing clay-based mats. Many enterprises in Canada, the European Union and even China have adopted this technology.

Clay is used not only for waterproofing ponds, but also for the most common wells. Moreover, its use is mandatory, otherwise dirty surface water will enter the well through the walls.

Advantages of pond waterproofing with clay:

• Clay can be stored forever without losing its properties.
• A pond with clay waterproofing does not need to be repaired, as it does not “break”.
• Clay is very plastic and finely dispersed.
• Clay will not crack, and it is not able to erode groundwater.

It should be remembered: clay does not let water through, but the same cannot be said about moisture. If the foundation does not have surface insulation, then it will not get wet, but it will definitely become wet. Based on this, a clay castle is best used in conjunction with surface insulation.

One of physical properties clay - expansion when freezing. Under certain circumstances, this can work against you. Clay soil at the construction site involves the construction of a foundation with smooth surface and an outer profile that does not expand upwards, otherwise, when cold weather sets in, the base can be squeezed out. But if such a castle is made in sandy or sandy loamy soil, there is absolutely nothing to worry about.

To make a reliable clay castle, it must be compacted in layers in the formwork, and the latter does not have to be even.

Clay tips:

1. The best clay should be as oily as possible, that is, with a sand content of no more than 5-15%. The color of the clay, especially for the waterproofing of the pond, does not matter. For construction, you can take loam, but its efficiency is much worse.
2. The quality of clay can be determined literally by touch, just by crushing it in your hand.
3. To make a clay castle good, the material must be natural humidity. Clay, which is planned to be stored for some time, needs to be poured with water and covered from above. If something can be built from clay, the material does not slip between the fingers and does not crumble in the hands, then it is ready for use. Clay, about a fifth or tenth of which is diluted with lime, improves its properties - especially when it has a high sand content.
4. If the clay is carefully compacted in the formwork, the result will be excellent. Installed in a pit wooden shields can provide a 15–20 cm thick lock, which will have a good effect on the waterproofing of the pond. When the reservoir is not too large, and there is more than enough clay, then the walls of the future reservoir themselves can act as formwork.
5. Clay needs to be compacted in layers, the height of each is from 20 to 30 cm. If the castle is covered with geotextile, then the waterproofing will improve significantly, since the clay will not erode groundwater. Until the blind area is made, a strip of geotextile will also not interfere around the building. Backfill should be sloping away from the house. For the construction of the blind area, most often they take a mixture of crumpled clay with rubble, which is then paved on top. With a narrow pit, it is not necessary to expose the formwork.
6. For a well, a clay castle is built in the same way as a blind area. In width, it must be less than a meter. As for the depth, it is not necessary to make it too large, 50 cm is enough. In many houses, water pipes are laid from the well to the housing. No matter how deep they are laid, they must also be insulated with a clay castle.
7. On the clay, previously covered with geotextile, you can put a cobblestone or paving slabs. For waterproofing the pond, a three-layer clay castle 8-12 cm thick is suitable. The procedure here is as follows: the clay needs to be kneaded so that it becomes like soft dough, then apply to the surface - horizontal or inclined. After that, the material must be carefully compacted and allowed to dry. When the consistency of the dried clay is comparable to the hardness of plasticine, you need to do the next layer of the castle.
8. If the clay is allowed to dry out, it may crack. To prevent this from happening, it must be covered with a film or ordinary hay. A special pond film spread over clay will make your pond almost perfect.
9. The blind area of ​​​​clay must be paved or covered with geotextiles on top.

To date, clay remains a highly demanded material for waterproofing both ponds and buildings. Not only is it not difficult to find it, but it does not require any special qualifications to work. True, you have to work hard, but the result is worth it.

Liquid Pond Waterproofing

A pond without waterproofing can become a source of problems at any time. When equipping a reservoir, it is necessary to take into account many factors: the type and volume of the future pond, the surface topography, and the type of soil.

Waterproofing work is not always as simple as we would like, because you need to take into account the operating conditions of the pond, to know the features of a particular coating. In addition, all manipulations are carried out in the open air, which means that temperature changes affect the waterproofing. You should also keep in mind the possible swelling of the soil, a change in the physical properties of the material in contact with large quantity water, etc. It is worth the slightest crack or a very small defect in the waterproofing of the pond, as the entire coating can be irretrievably destroyed. That is why it is necessary to choose the material for equipping the pond in the most careful way. First of all, the coating must be not only durable, but also elastic - this is the only way it can withstand high loads without losing its functional qualities.

One of the best views waterproofing for an artificial pond is liquid rubber. She has a lot of advantages. It is reliable in operation, has a long service life, is not afraid of low temperatures down to -60 °C. Simple and easy to use. The actual waterproofing material for the pond is a two-component mastic, the basis of which is a water-polymer bitumen emulsion. As for the thickness of the coating, it will be different for each reservoir. Liquid rubber is more puncture resistant than film. She can serve up to 20 years.

How to waterproof a pond with this material? First you need to dig a pit, overlay it with geotextile, securing the fabric around the edges. The turn of liquid rubber has come. By applying it to the bottom of the future pond, you will thereby create a dense film that will repeat every bend of the bottom, moreover, without joints and seams. No additional activities are required. If placed near a pond natural stones and decorate this corner of the site with pretty vegetation, then such a reservoir can be distinguished from the real one only with great difficulty.

Another advantage of this waterproofing material is that it is absolutely safe in environmental terms. Liquid rubber does not contain toxic substances. The resulting pond can be used not only for swimming, but also to breed fish in it. Rubber emulsion does not allow the formation of fractures, does not crack at low temperatures.

If you list all the advantages of waterproofing a pond with liquid rubber, you get the following list:

• it can be both sprayed and applied with a roller or brush;
• all work is done in the shortest possible time;
• liquid rubber has good elasticity even at low temperatures;
• the material is environmentally friendly;
• for the substrate, you can choose any configuration;
• easy to increase strength with a reinforcing layer;
• there are no seams and joints;
• The material is resistant to abrasion and tear.

Why waterproofing a pond with vinylite is good

Today, people are increasingly concerned about the environmental friendliness of the materials around them. That is why lately vinylite is gaining great popularity.

This geomembrane for waterproofing ponds is made on the basis of purified polyvinyl butyral (PVB) and is completely safe for human health.

The device of a pond in the country with film waterproofing with vinylite geofilm has the following advantages:

1. The guarantee for the material is 20 years, but it can serve more than 40 years. It is not afraid of ozone radiation and ultraviolet radiation.
2. Vinylite retains elasticity at temperatures up to 10 degrees Celsius. If the temperature is lower, it's okay: the material does not lose its strength, there are no stresses and shrinkages. Extremely comfortable to work with, easy to cover internal corners, various kinds of bevels and slopes. The film, even after many years of use, does not dry out, and therefore does not collapse.
3. Vinylite lends itself well to cutting into the desired pieces, which can then be glued together using any alcohol (ethyl, isopropyl, etc.). Apart from it, nothing else is needed for gluing.
4. If the temperature is positive, then the geomembrane can be stretched three times without any consequences. When waterproofing a pond, this is especially important - in the event that the foundation pit has just been dug, and the earth has not yet settled. Vinylite can be laid without much difficulty, and due to the elasticity of the material, plant roots cannot harm it.
5. The geomembrane can be easily attached to filtration systems, drainage, pond pumps.
6. The quality of vinylite does not decrease with time. In addition, if necessary old film easy to cover with patches from a new one. None additional processing this is not required.
7. This geomembrane can be used to equip a wide variety of objects, ranging from small streams to large ponds. It is suitable for waterproofing natural and ornamental ponds, communal diversion ponds and even city fountains.

With Vinyl:

• Finish the objects of storage of petroleum products - gas stations, tank farms and so on.
• They surround the storage of liquid and solid waste: landfills, manure storages, burial grounds, etc.
• Waterproof canals and ponds, dams, slopes.
• Manufacture of devices for the accumulation of liquid waste.
• Protect roads and underground structures. Waterproofing foundations, basement buildings and roofs.

In addition, vinylite is now used in the construction of port facilities, as well as to protect various kinds of tunnels, passages and escalators from moisture.

If you want to buy a similar waterproofing for a pond, then keep in mind: the price of the product will depend not only on the size of the reservoir, but also on the thickness of the film.

Owners of suburban areas can use vinylite not only for finishing ponds, but also to protect terraces, basements, and retaining walls with it. The geomembrane is very resistant to mechanical damage, and therefore is not afraid of the natural movements of the earth, it can be covered with soil both manually and using mechanical equipment. This material able to tolerate the growth of the root system of trees, groundwater currents and the appearance in the soil chemical substances. Vinyl is not afraid of the growth of mushrooms and rapid reproduction soil bacteria.

When mounting a geomembrane, you can not be afraid of accidentally puncturing it. Also, the material is resistant to abrasion and cracking.

How to waterproof a pond with vinyl film

When waterproofing a pond with vinylite, proceed in the following order:

1. Doing under future pond pit, following the technical and project documentation. You can do it yourself, or you can contact a construction company.
2. Dig a trench along the perimeter of the reservoir. It will be needed to fix the film and build an earthen rampart.
3. Thoroughly clean the bottom and walls of the pit from the roots of trees, stones and other debris. There should not be any protrusions that could damage the waterproofing of the future pond.
4. If the ground on the site is soft, then the base of the pit should be well tamped.
5. Sprinkle clean sand on top. Moisturize it, but not too much.
6. Lay geotextile on the surface of the sand. This material will give the pond waterproofing additional strength, as well as protect against pests and growing roots. In order not to carry waterproofing material around the entire pit, first spread it on free space and mark the center of the canvas. Another option is to roll the film in the form of an envelope, also choose the center, and only then lower it into the pond hole.
7. If you plan to put terraces on the shore of a reservoir, then fix the film gradually, first on one tier, then on another, etc. You should not pull the waterproofing material strongly, you can even allow a slight sag.
8. Align the film over the entire surface of the pit, then fix with a material gap of no more than 50 cm.
9. The waterproofing of the pond is ready, you can fill the pit with water. The only thing is to do it gradually, controlling the tension of the film so that it does not tear.
10. Before using the reservoir for its intended purpose, let it settle for 2-3 days.
11. At the end of the work, strengthen the waterproofing using a pre-dug trench and special plastic pipes. Bars or other similar materials are also suitable for this.
12. To make the pond look spectacular, decorate it with plants, figures, and other items suitable for decoration.

Such waterproofing is suitable for a pond of any size, shape and purpose. The material is sold in rolls. different widths, therefore, it will not be difficult to choose the right one, both at the stage of designing a reservoir, and for a ready-made pit. Mounting such waterproofing, as you have seen, is also quite simple. And another advantage is that over time, the "layout" of the pond can be changed. This will not present any particular difficulty, because with the help of special glue one or more pieces of waterproofing can be added to the film.

Properly glue vinylite as follows:

1. Clean both pieces of film from dust and dirt. Treat them with a special cleaning compound, then let the material dry. If the temperature is above 5 ° C, then you can start working. Otherwise, it is advisable to lay a warm contour along the gluing seam and only then start the process.
2. Be sure to overlap the pieces of the film (from 5 to 25 cm).
3. In order for the parts of vinylite to stick together as much as possible, it is advisable to use a special glue. If you walk along the gluing contour building hair dryer, it will also improve the quality of work. The only thing is that the hair dryer cannot be held over the heated area for more than 3 seconds. As for the glue, you need to apply it to the film with a flat brush.
4. Pass along the joints with a rubberized roller.
5. Go over the contours of the seam again, this time with glue. If you want to check the joints for strength, do this after the glue has completely dried.
6. The glue will dry for a day or two, provided the temperature is more than 5 ° C.

Nobody bothers to do the waterproofing of the pond with your own hands, but keep in mind: specialists will still perform this work better. And buy everything necessary materials You can with us, in the company "Sportstyle".

"Sportstyle" started its activity in 1992 and for more than 25 years has been successfully presenting its products and services in the markets of Russia and neighboring countries. The organization is also engaged in industrial waterproofing. Under the company's brand, waterproofing is produced for walls and floors, basements, pipes and water pipes, pits and ice rinks, cesspools and foundations at the stage of concreting.

One of the main activities of the company is the production of sports equipment. Our products are very popular and in demand, among them:

• boxes, rings, bags and pears;
• wrestling mats;
• equipment for sports aerobics and much more.

The range of our company is not limited to portable equipment. We are glad to make for you tents for summer cafes and weddings, tent garages, trade tents, awnings for cars and boats, as well as bowls for pools.

You can contact us by phone 8 800 555-29-10 (calls within Russia are free), or visit our office in Novosibirsk at ul. on Frunze, 142/1 third floor, working hours: Mon-Fri from 9:00 to 17:00, Sat and Sun - days off.

In fact, the construction of an artificial reservoir consists in creating an airtight cavity filled with water on the site. The main task in the arrangement of the pond is precisely to ensure 100% tightness of the prepared excavation. To ensure tightness, a complex of waterproofing materials is used. In each artificial pond, it is necessary to create a certain sequence in waterproofing, which will prevent the absorption of moisture into the soil and allow the pond to remain operational for a long time.

Creating a waterproofing system with your own hands is a process that only seems simple and affordable from the outside. Very often, such work does not lead to the result that was expected. An unreliable, poor-quality waterproofing coating can quickly be damaged, cracked from temperature changes, not survive the winter, and then all the work on arranging the pond will be in vain. During our work, we have seen many neglected, abandoned ponds that remain on the site, reminding their owners of trying to save money and do everything on their own.

ProfPokrytiya offers professional approach to the issue of arranging waterproofing for artificial reservoirs. We have more than 20 years of experience in this field, our employees are 100% versed in the technology of creating high-quality and reliable waterproofing.

What materials do we use?

Represents a thin roll material black, which is laid on the bottom of the pond, fixed along the coastal line and then filled with water. This type of waterproofing can be attributed to budget options. It is suitable for ponds with straighter banks to avoid a lot of folds.

Advantages: quick and easy installation, affordable cost, no need to use specialized equipment, maintainability.

Disadvantages: the possibility of damage, the formation of wrinkles during installation, fragility, without proper decor looks a little presentable.

Polymeric material reinforced with a special fabric is applied to the prepared reservoir bowl with a brush or airless spray method. forms an even, monolithic seamless sealed layer.

Advantages: durability, maintainability, strength and durability, attractive appearance of the pond even without decor due to flat surface prevents plant germination. The material has three main colors: Blue, gray and black.

Disadvantages: higher cost, requires adherence to the sequence of layers of waterproofing.

In our work, we use the latest generation of Polymer Professional Coating, which provides absolute tightness, allows you not to drain the water for the winter, i.e. can winter under ice, designed to last longer than previous generation polymers. Its service life is at least 30 years.

Durability, maintainability, strength and durability, no wrinkling.

Butyl rubber film (membrane)

Ease of installation, affordable cost, no need to use specialized equipment, maintainability

Advantages of waterproofing services for artificial reservoirs from ProfPokrytie:

1. We provide high quality work, thanks to the observance of technology, the use of high-quality consumables;
2. You don't need to rent or buy liquid rubber coating equipment;
3. We are able to purchase materials favorable prices through partnerships with trusted suppliers;
4. We clearly observe the deadlines for the work, we fix them in an official contract;
5. We provide a guarantee for the work performed, the materials and equipment used;
6. We carry out full complex works on the arrangement of artificial reservoirs of any complexity on the territory of Moscow and the region.

The company "Clean Ponds" provides services for waterproofing ponds and reservoirs at summer cottages and garden plots, in parks, on the territories of recreation centers, and other spaces. We work in accordance with technological requirements We only use materials from reputable brands.
Waterproofing a reservoir is the main stage in its construction. The durability of an artificial pond depends on the technology and quality of insulating materials. By contacting us, you can be sure of high quality services provided, because we give a guarantee of up to 5 years for all types of work.

Calculation of the film area for waterproofing

Enter data to calculate film area:

How do we waterproof a pond?

The company's specialists carry out waterproofing for ponds and reservoirs in several stages. Each of them is vital and decides a specific task. The exclusion of at least one stage or its poor-quality implementation can lead to the destruction of the reservoir and the flow of water into the ground. Contact the professionals of "Clean Water Bodies" for a pond waterproofing service so that your pond will please for many years.

Our technology:

• Leveling the soil

After digging a pit for an artificial reservoir on the site, its bottom is carefully cleaned from the remains of plants and stones. Then all irregularities and unnecessary reliefs are smoothed out. This is necessary for the correct and tight fit of subsequent materials.

• Create a sand cushion

The bottom of the reservoir is compacted with sand. Created a kind sand cushion, which prevents grass from growing and protects the butyl rubber membrane from damage.

• We fix geotextiles

A special material made of polypropylene threads is fixed to the walls and bottom. It protects the membrane from damage, does not allow vegetation to break through, and protects against rodents.

• 4. Install the Firestone Butyl Rubber Membrane

Such a membrane is considered the most reliable waterproofing material for creating artificial reservoirs. It can be installed in any weather, is UV resistant and sub-zero temperatures. The service life of the membrane reaches 50 years.
After completing the last stage of waterproofing work, you can safely fill the reservoir with water. It is also necessary to arrange the coastal zone of the pond to make it aesthetically attractive.

What materials do we use

The success of the entire work largely depends on the quality of building materials. The company "Clean Waters" pays special attention to the choice of building materials. In waterproofing for ponds and reservoirs, we use Firestone EPDM products made in the USA, pumping and filtration equipment from Germany, as well as materials from reliable Russian brands.

The cost of waterproofing ponds and reservoirs

The company "Clean Waters" offers services for waterproofing artificial ponds at the best price. Behind long time works we have purchased profitable terms cooperation with suppliers building material. That is why our pond waterproofing prices are among the most affordable, and the quality of implementation is consistently high.

By ordering the waterproofing of the pond in the "Clean reservoirs", you get:

• A body of water that will delight for decades
• The work of true professionals
• Waterproofing of a reservoir in optimal terms
• High quality at an affordable price
• 3 year labor guarantee
• Consulting support of specialists
• Priority maintenance of reservoirs after the expiration of the warranty period

Start the construction of a beautiful pond by contacting the professionals of the company "Clean Ponds". After all, high-quality waterproofing is the key to a beautiful reservoir on your site. Don't take the risk and order. this species work in dubious companies or try to do it yourself. Without experience and knowledge of technology, it is almost impossible to carry out effective waterproofing of a pond.
Get free consultation specialist right now by calling: +7 495 641-85-95, +7 926 530-04-60
Or order a free call to anywhere in Russia