How to make a wooden stool. How to make a stool with your own hands - drawings

Therefore, it is natural to use compact, stylish stools. The fashion for bar counters has increased interest in high-legged stools.

Modern stools are made with high quality, which means they will stay with you for many years, decorating your dining area.

They are comfortable, small-sized, easy to hide under dining table, can be removed to the pantry or taken out to the loggia. Nowadays, stools can be decorative element your kitchen design. Their choice is huge. Everyone can choose stools to their liking.

Classic kitchen stool

These days there is a great demand for simple wooden stools. classical style.

Usually they are an essential attribute of country and Provence style kitchens, and recently, due to their elegance, wooden stools are used in high-tech interiors and are popular with connoisseurs of simple laconic forms.

Stylish stool - the highlight of your kitchen

Stool designers often focus on their color. Bright plastic stools will bring a festive touch to the interior of the kitchen in neutral, pastel colors.

Cheapness plastic furniture makes it possible to frequently replace it with furniture of a different color.

Thus, your interior will change without much cost. There are models of folding stools. They take up little space when stored and, if necessary, are easily laid out.

Stool as part of the dining area

your kitchen small size – perfect solution replace massive chairs with elegant stools with upholstered seats, which can be removable or sewn on.

Decor soft seat stools

A modern stool can often be decorated with a cape, pillow or cover. In accordance with your preferences for your particular interior, you can choose the texture of the material, its color scheme and the right pattern.

Kitchen rustic style stools with cushions made of printed fabric with floral patterns work well.

Also, stools covered with knitted covers of bright colors will look good here.

For a classic style kitchen, opt for satin with a rare discreet pattern that will go well with the wooden carved elements of your furniture.

The leather upholstery on the stool will make your kitchen look more luxurious. For the same purpose, a fabric made under the skin of a snake or a crocodile is suitable.

bar stool

For a long time high stools from cafes and bars stepped on home cooking. The bar counter of your kitchen cannot do without such a stool.

Currently, manufacturers offer many models of such stools. The number of legs can vary from one to four. Bar stools amaze with a variety of shapes of their seats, which can be in the form of a square, rectangle or circle.

For changing metal stools wooden kitchen bar stools have arrived, which can be made according to your custom order.

If your dining table is taller standard size, then bar stool- this is for you.

Stools of non-trivial shapes

If you're an original looking to impress your guests, there are custom designs for you, such as a cube without legs.

Comedians will be delighted with seats that follow the contours of a certain back of your body - designers have such models.

A stool with a back is well suited for a child, because this way he can sit at the dining table with you, just like an adult.

We make a stool ourselves

Do-it-yourself furniture is unique, although it may be inferior to the store in quality.

You can always find ready-made drawings for making a wooden stool on your own on the Internet or on the pages of many specialized publications.

If you do not dare to start making stools with your own hands, but passionately want to decorate your interior with something unique and inimitable, then you should try to update, redo the stools you already have.

Here you can not do without modern varnishes, paints, you will need a certain amount of thread, fabric and tools.

The easiest way would be to repaint the stools in a new one. suitable color. Originality and originality will be given to your stools by self-sewn or knitted covers. Those who wish can use the decoupage technique to create a unique pattern on the stools.

In building successful interior There are no trifles, so you should not spare your time and effort to choose the right kitchen stool for you.

Photo of stools in the interior of the kitchen

A stool is an integral element, a must-have fixture in any home. You can't call it too expensive or rare to be taken for hand-made, but a hand-made stool is sure to be more durable and elegant than a standard item from any store. This is what we will talk about today.

When purchasing furniture, you can notice a clear discrepancy between the prices of materials for their manufacture and the final price of the product. This is especially striking when buying fairly simple pieces of furniture, such as stools.

Stools are most often made from chipboard.

Stools are most often made from chipboard. It's pretty cheap material, easy to work with, durable and great for indoor use. Having looked once at a chipboard stool, it is easy to understand that it is quite easy to make it with your own hands. We invite you to familiarize yourself with detailed instructions for the manufacture of various configurations of stools at home.

Having looked once at a chipboard stool, it is easy to understand that it is quite easy to make it with your own hands.

You can make a stool with your own hands, having at hand professional and non-professional elements and devices.

Required tools include:

1. electric jigsaw, complete with a small file;
2. screwdriver

To decorate the stool seat, you can also prepare foam rubber and upholstery materials.

You may also need a drill with a drill and a stapler for construction purposes.

The upholstery can be fabric, oilcloth, leatherette.

To simplify the assembly task, you can first glue the parts, and only then fix them with self-tapping screws.

Materials for manufacturing:

1. chipboard sheets, new, substandard or remaining spare parts from old furniture;
2. self-tapping screws, no longer than the thickness of the chipboard;
3. confirmations 4 pieces. Size 6.4 mm by 50 mm;
4. metal corners 4 pieces;
5. adhesive tape for processing the edges of sheets;
6. thrust bearings of any acceptable materials;
7. sandpaper for sanding.

Creating a stool from chipboard with your own hands allows the master not to limit himself standard models.

Non-professional tools that can be found in any home:

1. pencil or marker;
2. cardboard for making templates;
3. ruler or tape measure;
4. a knife of any configuration, the main thing is sharp.

Seemingly, simple design stool has several dozen different models.

Parts of the stool are assembled using confirmations and self-tapping screws.

To decorate the stool seat, you can also prepare foam rubber and upholstery. The upholstery can be fabric, oilcloth, leatherette.

illustrative examples can be viewed in furniture stores, from neighbors or on the Internet.

Create a project

Creating a stool from chipboard with your own hands allows the master not to limit himself to standard models. It would seem that the simple design of the stool has several dozen different models. Illustrative examples can be found in furniture stores, from neighbors or on the Internet.

Usually, several pieces of stools are needed at once, so it is extremely important to choose one shape you like and make identical items according to the selected drawing.

Getting Started final assembly parts, all cut edges must be pre-treated special tape.

Usually, several pieces of stools are needed at once, so it is extremely important to choose one shape you like and make identical items according to the selected drawing. When making a drawing, it is important to remember that the design of a stool requires a clear balance between its lower and upper parts. A discrepancy between the dimensions of the seat and the width of the legs can lead to an imbalance, as a result of which the object will be very unstable, and therefore traumatic.

When making a drawing, it is important to remember that the design of a stool requires a clear balance between its lower and upper parts.

Choosing a material for manufacturing

Stools can be made from different materials. Suitable chipboard, plywood, wooden blocks and boards. The cheapest and most unpretentious material to work with is chipboard. Sheets can be purchased at the store, at furniture factories or buy trimmings from small firms that make furniture to order. Sheets of old chipboard, which were previously parts of other furniture, are also suitable.

A discrepancy between the dimensions of the seat and the width of the legs can lead to an imbalance, as a result of which the object will be very unstable, and therefore traumatic.

The final touch in preparation before assembly will be drilling required holes.

We apply graphic markup

Stools can be made from different materials.

Having decided on the model of the future stool, it is necessary to mark chipboard sheet thus preparing it for further work. If you plan to make several identical stools, then it is better to make a pattern for all parts of the furniture. The template is conveniently made of thick cardboard.

For further ease of use of the manufactured furniture, the corners of the parts should be rounded. It is better to make even roundings with a compass. The absence of this item can be compensated, for example, with a plate of a suitable diameter.

The cheapest and most unpretentious material to work with is chipboard.

High speed ensures cutting of sheets without chips and notches.
After trimming, it is necessary to clean all the edges of the stool sandpaper.

Depending on the selected shape and model, the dimensions of the elements may be as follows.

No. Stool model Seat dimensions Legs dimensions Crossbar dimensions

• 1 30x30 30x40 20x12
• 2 30x40 30x40 30x15
• (3 pieces)
• 3 40x40 20x35 (8 pieces) 30x20
• (4 pieces)

Sheets of old chipboard, which were previously parts of other furniture, are also suitable.

Cut out elements for the future stool

The main thing is to decide in advance on the number of pieces finished products, and calculate the required volumes of materials.

Cutting elements from existing pieces of chipboard is carried out using electric jigsaw.

Cutting elements from existing pieces of chipboard is done using an electric jigsaw. You can make a good cut of the edge using a small file and a high speed jigsaw. High speed will ensure cutting of sheets without chips and notches.

After trimming, it is necessary to clean all the edges of the stool with sandpaper. Such processing will ensure a good fit of one part to another and simplify assembly.

The final touch in preparation before assembly will be drilling the necessary holes. Make sure that the holes are drilled at the same level.

Having decided on the model of the future stool, it is necessary to mark out a chipboard sheet, thereby preparing it for further work.

We collect a stool

When starting the final assembly of parts, it is necessary to pre-treat all cut edges with a special tape. The tape must be chosen to match the color of the sheet or vice versa in contrasting shades.

The tape is applied to the cut of the legs and the seat and glued with a hot iron. The iron must be applied with quick and short movements. The warm tape should be pressed down with a clean cloth. The glue, which is on the back of the tape, sets very quickly and does not require long warm-up or cool-down.

Parts of the stool are assembled using confirmations and self-tapping screws. To simplify the assembly task, you can first glue the parts, and only then fix them with self-tapping screws.

The seat of the resulting chair can be made soft due to foam rubber and upholstery.

For further ease of use of the manufactured furniture, the corners of the parts should be rounded.

It is better to make even roundings with a compass.

VIDEO: Do-it-yourself stools from chipboard scraps.

50 photo ideas on how to make a stool with your own hands from chipboard

The stool has no back or armrests. Therefore, if you decide to assemble such a structure yourself, you are unlikely to encounter any special difficulties in the manufacture of such a piece of furniture. In this article we will tell you how to make a stool with your own hands.

If you have never assembled anything like this from wood, then it is unlikely that you will be able to make a high-quality and reliable product the first time.

You can use a material that does not require any special preparation for assembly. It can be chipboard or regular 20mm plywood. It must be said that chipboard- the material is quite capricious and fragile in itself. Also, a stool made from it will turn out to be quite heavy. In addition, due to its demand, it will roam from room to room, which will sooner or later affect the integrity of the entire structure. Therefore, it is better to assemble a stool from plywood. It is also worth mentioning the fact that the chipboard sheet has dimensions of 2750 × 1830 mm, while the plywood sheet is 1525 × 1525 mm.

From one sheet of plywood, you can make three stools. To perform the work, you will need the following tools and supplies:

• Electric jigsaw with a set of saw blades for wood with fine teeth.
• Screwdriver.
• Joiner's square.
• Confirmed drill 5×50 mm.
• Screwdriver bits. It is better if it is a set, where, as a rule, there is a hexagon for confirmations.
• Sander or ordinary coarse and fine-grained sandpaper.
• Confirmations: 12 pcs.
• Furniture plugs for confirmations: 12 pcs.
• Self-tapping screws 4×16: 24 pcs.
• Furniture metal (can be plastic) corners: 12 pcs.

Training

First, we mark the future details in size. We cut with a jigsaw 6 rectangular elements measuring 400 × 300 mm (legs) and 140 × 248 mm (stiffening ribs), also 3 square parts (seat) measuring 330 × 330 mm.

The height of the sidewall (legs) should in no case be less than 400 mm, otherwise it will be uncomfortable to sit on such a stool.

On one of the parts, which will be our sidewall or leg, we need to cut out the radius. How to do it? You can use a compass, or you can use a large oval plate. Attach to the sidewall and circle a semicircle with a marker or pencil. Using a jigsaw, carefully cut out a rounded depression into the details. Then we apply the cut out part to the second side of the leg and do the same procedure. For a square part, which will be our seat, you can find a smaller round plate and also mark the radii on each side, you can also round the corners at the same time. We make cutouts. After the radii are made on all the details, we outline the places where we will have fasteners.

If you decide to make the seat soft using foam rubber and upholstery fabric, then the radius cuts on it will be superfluous.

Assembly

Now we proceed directly to the assembly. On all parts (legs) we drill two vertical holes with a confirmation drill.

When drilling holes in the sidewalls, you need to attach a stiffener to the place where it will be attached so that the drill, having drilled a leg, makes a notch at the same time in this rib. Then the holes will match better, and there will be no skew when twisting the confirmation. At what height from the floor these stiffeners will be attached, everyone decides individually.

After the legs with stiffeners are assembled, it remains to attach the seat to them through the corners. Let's go through all the corners with sandpaper (first coarse-grained, and fine-grained at the finish). We put caps on the hats of confirmations and that's it - the stool is ready. Stools of this design are very well suited for the kitchen.

If you decide to make a stool out of wood, then you will need a hewn board without knots 800 × 200 mm 25 mm thick.

Instruments:

• wood screws with a sweat head - 8 pieces (6 × 60 mm);
• sandpaper holder (sanding block);
• jigsaw;
• screwdriver;
• joiner's square;
• roulette.

Via measuring tool we measure the future seat, 200 × 400 mm in size. Then we measure out two parts that will be our chair legs. If you want to get a more elegant product, then they can be made curly. To do this, you need to prepare a template in advance. The simplest thing is to cut out a pattern from thick cardboard along the lines already drawn with a marker. It remains just to attach the cardboard to the wooden part and circle it.

Now we need to mark one more important element construction: stiffener.

To give the product greater stability and rigidity, the jumper between the legs should have a trapezoidal shape, that is, one side may have a size different from the size of the other side, but strictly proportionally, so that 5 mm bevels fall on each side, for example, 220 mm and 230 mm. After you have drawn the entire board, you can start cutting the parts.

To ensure that all parts are cut evenly, the handle of the jigsaw must be held firmly, as it vibrates strongly when cutting. You can also cut evenly if you cut not along the line, but next to it.

After all the details are cut off, it's time to take on the sanding block. We grind the end parts and corners of the workpieces. Moreover, it is better and more convenient to perform grinding when the parts of the stool are not yet assembled into a structure.

Sandpaper 40-60K is mainly used when there are obvious bumps on the wooden part. Sandpaper 80-120K, when these irregularities are insignificant. Skin 160–320K is used for finishing. Which type of sandpaper to use depends largely on the type of wood and the results of the cut.

And then came the long-awaited moment of assembly. It is best to do this on as flat a surface as possible.

1. We connect the stiffener with the legs, screwing through one self-tapping screw on each side. The smaller side (220 mm) should be at the top.
2. We put the seat on top and fasten it through two self-tapping screws on each leg.
3. We twist below one more screw through the legs to the stiffener.

The stool is ready. To give a noble look to your product, you can cover it with a mahogany stain and then open it with a transparent varnish for wood.

Making a folding stool

But what if you had the idea to do more complex element from the detachment of stools - a folding stool. The need for such a design may arise not spontaneously, but quite even situationally. For example, it is convenient to periodically take such a stool for fishing or for nature, or maybe somewhere else. The advantages of such a folding stool, first of all, are that it is quite compact and easily fits in the trunk of a car.

Now let's move from words to deeds. To do the job, we need:

• 4 wooden blocks measuring 470 × 40 × 20 mm, where 20 mm is the thickness of the part;
• 4 small planed crossbars measuring 320 × 40 × 20;
• 4 bars for sitting, size 350 × 90 × 20 (2 pieces) and 350 × 60 × 20 (2 pieces);
• 2 overhead cross-legs, size 320 × 40 × 20;
• 6 bolts with a diameter of 6 mm (length including cap is 40 mm), 12 self-tapping screws (45 - 50 mm).

Everything before assembly wooden details stools must be perfectly sanded.

Assembly should begin with the fact that 470 mm bars are bolted together. We measure 260 mm and in this place we drill a hole of such a diameter that the bolt head and the fixing nut are recessed into the tree.

The fastening of the legs to each other should not be in the middle, otherwise the whole structure will turn out to be too high and unstable. Such a mount should be slightly off-center.

Now through bolted connection fasten the outer crossbars (320 × 40 × 20) to upper parts outer legs. We do the same with the inner crossbars, fixing them to the upper parts of the inner legs.

We got a swivel that will allow our future stool to fold. Now, to the fixed crossbars, we fasten bars for sitting on self-tapping screws: two extreme, wide, 90 mm each. It is worth considering that these outer bars are attached as follows: one to the outer crossbar, and the other to the inner one, and they should protrude 15–20 mm in relation to the crossbars.

We measure 100 mm from the bottom of the legs and fasten the legs for rigidity. Now the most important thing begins - this is the fastening of two internal narrow bars 60 mm wide. It is from them correct installation and will depend on how well the folding stool mechanism will work. Don't forget that these narrow seat bars are attached in the same way as wide ones: one to the outer bar, the other to the inner bar.

Approximately 15-20 mm should separate the narrow inner bars from the wide outer ones. In this case, the height of the entire structure of the stool can be up to 450 mm from the floor. It's normal standard height in which a person can feel comfortable. If the stool turns out to be higher, you can reduce its height by inserting an additional bar with dimensions in the section of 20 × 20 mm.

Of course, the stool itself cannot be attributed to the class of ergonomic furniture. But it is always an integral part home interior. No matter what it is, this stool - small or large, folding or not. It's important that independent production a stool, firstly, will save you money, and secondly, it will be a good evidence that you have skillful hands.

Video

See how you can make a simple stool:

This video shows how to make an oak stool:

A photo

For small kitchens stools are most suitable: they are compact, light, transportable, and now they have an elegant design.

Scheme of a stool made of chipboard.

If there are a lot of people in the house or relatives and friends often visit you, then with the help of stools they can easily be placed at the table. But if you buy a new one kitchen set expensive, then you should know yourself.

You can make a stool on your own without much difficulty, the main thing is that there is a desire and all essential tool and material. Despite the simplicity of the design of the stool, it is still necessary to prepare a drawing at the very beginning of work. Many neglect this stage of work, and as a result, you have to redo the furniture, because. this design unsuitable for use.

Varieties of stool

Stools in their form and design are different. The seat of the stool can be square, round, octagonal or custom in shape. The legs of the stools also have a variety of shapes, there are standard rectangular ones, there are carved, twisted, solid ones, which, when connected, form a cross. And there are solid stools that are made of logs in the form of an hourglass.

Image 1. A simple stool consists of a seat measuring 300 x 300, and legs fastened to them.

There are stools that combine boxes for storing various little things, but such stools are not very comfortable. You can also select stools with a soft comfortable seat and just a seat made of boards.

The material from which kitchen stools are constructed can be different: metal, plastic or wood. Each material has its own advantages and disadvantages. When choosing stools, first of all, the place where they will be used (whether it be a kitchen, a summer house or a gazebo), the interior already available there and financial resources, which can be spent on the purchase of a stool or on construction material to make, for example, stools for the kitchen on your own.

Back to index

Making a simple product

So, to make a simple stool, which is shown in the figure above (image 1), you need to prepare the following tool:

• Pencil
• Ruler and square
• Drill or screwdriver
• Hacksaw
• hex key
• Sandpaper
• Drills 6 mm, 5 mm and 10 mm
• Lacquer brush
• Set of furniture screws
• Electric jigsaw

Image 2. Diagram of a curly stool.

• Wooden beam for legs and crossbars with a section of at least 30 x 30 mm
• Piece of laminated chipboard 300 x 300 mm
• Varnish for wood
• Birch plywood 20 mm thick

Now you can start creating furniture for the kitchen with your own hands. The seat of the stool should be comfortable, so you need to determine its dimensions. Optimal size seats 300 x 300 mm, this size is determined by convenience and compactness. But you can choose the size according to your dimensions. For simplicity it is better to use laminated chipboard, it is easy to cut, and besides, it can be pasted over with edging tape, the shade of which can be chosen as desired.

Using a hacksaw, you need to cut a square measuring 300 x 300 mm. To give strength to the seat, it is necessary to cut off the corners, the sides of which are 30-40 mm, or use sandpaper to round off the corners, where the rounding radius will be 5 cm.

After the seat is ready, you need to ennoble it with the help of an edge tape. To do this, with sandpaper, you need to remove all the bumps and roughness, stick the tape, lay a piece of fabric on top of it and iron it with a hot iron. Any remnants of tape that remain outside the seat must be cut off with a clerical knife at an angle of 45 °.

Image 3. Scheme of the side part of the curly stool.

Now, on the underside of the seat, you need to make markings, mark the places where the legs of the stool will be attached. It is necessary to step back 30 mm from the edge of the seat and mark the attachment points with a pencil. Next, you need to prepare the legs of the stool. To do this, on a wooden beam, it is necessary to mark the length of the legs, it can be different, it all depends on your own preferences, but the standard length of the legs is 430 mm.

Once the stool legs are ready, you need to drill holes in the seat, and it is best to do this from the top side of the seat to avoid unnecessary burrs. Holes also need to be drilled on the legs, the total depth of the hole, together with the seat cover, should be 50 mm, a little more.

Next comes the assembly of the stool, for this, legs are inserted into the intended places and fastened with furniture screws. Furniture screws are screwed in very tightly, so at this stage it is necessary to control their parallelism relative to each other. You should not replace furniture screws with self-tapping screws, because. stools on self-tapping screws loosen very quickly, and they will need to be constantly tightened.

Image 4 . Detail of a stool seat.

Now, in order for the stool to become strong and reliable, you need to fix the crossbars between the legs. The crossbars are made from a wooden beam, and the first two crossbars are attached 50 mm below the seat, the next two 70 mm from the seat. This is done in order to avoid crossing the screws inside the legs.

It remains only to cover the legs of the stool with varnish, and pour a little colorless sealant into the holes, but before coating the varnish, you need to go over the surface of the legs and crossbars with sandpaper. In this way, you can design stools for the kitchen.