Where to place the washing machine in the house, so that it is beautiful and convenient. Is it possible to install a washing machine in the hallway Washing machine built-in closet hallway

If you install a washing machine in the kitchen, the operation of a small bathroom will become more comfortable. In this article you will see different variants installation and learn the features of such a solution on specific examples.

The top-loading model can be hidden under a folding tabletop, inside a furniture module. In the closed position of the tabletop, this part of the headset replaces the bar counter and complements the work area.

Attention! Do not use the top cover as working surface for cooking.

Installation methods

It is difficult to place a washing machine in standard headsets. To solve such a problem, it is better to choose a kitchen option to order.

1. Washing machine and refrigerator for 6 square meters. m.

The washing machine occupies the space under the dining table top, and the refrigerator is built into the headset case. Thus, for 6 square meters. m. managed to combine a maximum of functions.

Window sill replaced kitchen furniture. This method allows you to save space in the room and accommodate all the necessary modules.

It is desirable that the washing machine and other built-in appliances are separated by one or two cabinets. Such isolation is necessary for the correct operation of the devices.

If this option is not possible, organize high-quality thermal insulation inside the module.

A freestanding refrigerator is located on the opposite wall from the headset, next to a compact dining table. Drawers share cooker from the module to which the water supply system is connected. This approach allows you to comply with safety rules during the operation of the devices.

2. Models hidden by countertops and facades

Doors mask household appliances.

dishwasher, washing machine, hob, refrigeration and freezer. lower tier furniture filled with electrical appliances.

The floor at the installation site should be reinforced with plywood (for reliability). Thus, it will be possible to eliminate the unevenness of the base (adjusting the supports does not always solve this problem).

Take into account the vibration of the appliance in the spin mode. For correct operation, it is necessary to make a gap - about 2 cm on each side. Vibration becomes more noticeable at minimum load.

The doors close the washing machine and dishwasher.

Modern corner suite.

The washing machine was installed in the leftmost module, next to the kitchen sink.

Video

3. Stiralki under the countertop without a door

On this 8 meter kitchen the machine does not close the facade. However modern design looks appropriate in a laconic headset. In addition, the surface of the metallic shade is in harmony with the coating of the refrigerator.

For visual unity, the facade can be pasted over with a special film or painted in the color of the headset. Some companies decorate household appliances according to individual preferences.

Minimalism in the interior of the kitchen.

U-shaped layout of the headset. The distance between the modules must be at least a meter - for comfortable operation of the kitchen.

4. Cupboards

Cabinet cabinet allows you to adjust the level to load things as desired.

Advantages and disadvantages

Minuses:

  • It is necessary to decide on the installation immediately, since it is quite difficult to make changes;
  • The appearance of the machine is not always combined with the facades and spoils the overall picture of the interior (for example, the modern design of equipment and classic style headset);
  • Additional storage space for dirty clothes is needed;
  • An open door, after washing is completed, may interfere. At the same time, ventilation is necessary, otherwise mold will appear;
  • Soaps are released into the air. This combination with food is undesirable.

Pros:

  • All necessary communications located within the premises, respectively, connecting the machine will not cause much trouble;
  • The washing machine does not occupy the space of the bathroom;
  • You can choose a full-size model (up to 60 cm). In a compact bathroom, this is not always appropriate. Such machines are more stable due to weight.

After connecting the device, you need to start washing. During the test, be careful and follow the process. At this stage, it is necessary to identify installation flaws, if any.

Photo: 3dkuxni.ru, dokeswick.com, hvosty.ru, kuhnyagid.ru, mityaeva-mebel.ru, peterhendersonfurniture.co.uk, sibmebel24..moydom, vsekuhni.net, vyzovimastera.ru

Where to install a washing machine in small apartment- a question that each owner decides in his own way. Such equipment seems to be located in the bathroom. But due to the small area of ​​\u200b\u200bthis room, find a place for a suitable washing machine it doesn't always work here.

Therefore, quite often the washing machine is located in the kitchen, installing it next to the sink. There is also good access to water supply and drain pipes. But the presence of a washing machine in the kitchen still, firstly, reduces the usable volume of the kitchen space (there could be a more necessary table in the kitchen), and secondly, and this is perhaps the most important thing, the constant fuss with linen and washing powder- a very unattractive activity that is not combined with cooking. And from a hygiene point of view, this is not desirable.

On the other hand, in most apartments, both one-room and two-room apartments in old buildings, you can easily install a washing machine in the hallway. It is quite possible that someone in this place has a built-in wardrobe (I know this from my own experience). So it’s worth getting rid of this closet, and for outerwear a small hanger is enough (we did just that). You can, of course, embed a washing machine into this built-in wardrobe, but it seemed to me that this option was less aesthetic.

The decision is made - we install a washing machine in the hallway. You just need to connect it to the water supply, sewerage and electricity. All the elements necessary to connect the washing machine are included in its kit, but they are short.

For connection to the mains, given the rather large power heating elements washing machine, should be laid separate cable from the switchboard and connect it through the RCD (device protective shutdown). In this case, the socket must be located near the machine to avoid the use of an extension cord. In addition, it must be of the same type as the plug and rated for the maximum power input of the machine.

But main question- how to bring plumbing to the washing machine and drain hose and. Since one of the walls of the hallway where the washing machine will be installed is adjacent to the bathroom, these hoses must be passed through the hole made in this wall. And in the bathroom you can always find a way to install and connect them.

Having chosen the connection points for the drain and water hoses, we determine their required length. In this case, it should be noted that the hoses must have some margin, which makes it possible to move the washing machine a little. In addition, the drain hose of some washing machines needs an additional supply, since it top point should be located at a height of about 60 cm to prevent spontaneous drainage of water. Again, the drain hose can be permanently connected to the machine at the factory (and is only changed when it fails) and, if not the correct length, the hose must be lengthened. This can easily be done with a connecting pipe.

It is better to purchase a water hose (connector) not only of the required length, but good quality. You should not save on it, because if it is damaged, you can flood the neighbors from below.

Having prepared the hoses of the required length, we pass them into the bathroom through a hole in the wall. As for the eyeliner, it is desirable to protect its free end during this operation from dust and grains of sand.

Having stretched the hoses into the bathroom, we proceed to connect them with our own hands to the water supply and sewer pipes. The connection can be connected to the water supply at the faucet connection under the washbasin. To perform this work, it is better to remove the siphon to provide free access to the pipes. In addition, it will still need to be changed to a siphon of a different design, which has a special pipe for connecting a drain hose.

In old houses, piping is usually done along the surface of the walls, and the faucet is installed alone on the bathtub and washbasin (as in this case). Therefore, you must first install a tee at the junction of the pipes with a coupling (and such a connection is always available), on the outlet of which put a shut-off valve specially designed for connecting a washing machine. On the branch pipe of the crane having external thread, we screw on the union nut of the eyeliner with a rubber gasket.

After that, we put the end of the drain hose on the sink siphon pipe and clamp it with a plumbing clamp. By connecting the drain hose, we assemble the sink siphon.

After checking all the connections, install the washing machine in place. After that, it is necessary to level the position of the washing machine using its adjustable front legs so that it is stable and the top cover of the case is horizontal. Correct installation machines are the key to its good work.

How to install a washing machine in the hallway yourself - step by step instructions

  1. We punch a small hole in the partition so that the hoses from the washing machine, when it is put in place, approach it without bends, and from the side of the bathroom there should be no obstacles for laying them to the water pipe and drain.
  2. Due to the short length of the hoses included with the washing machine, they will have to be extended. To do this, you should purchase an eyeliner of the required length and an additional hose to extend the drain hose.
  3. We extend the standard drain hose using a special plastic pipe. We clamp the ends of the hoses on the branch pipe with clamps.
  4. In order to prevent foreign particles of construction debris from getting into the eyeliner, we protected its open hole by wrapping the end of the eyeliner with plastic wrap.
  5. We screw a shut-off valve designed specifically for washing machines into the tee pre-installed in the water pipe.
  6. We pull the drain hose onto the sink siphon pipe and crimp it with a clamp.
  7. After making all the connections, we assemble the sink siphon.

A washing machine in the hallway is a convenient, but extremely rare solution. But if there is nowhere to put the machine in the bathroom or in the kitchen, especially if you are the owner of a small-sized “Khrushchev”, installation in the corridor or hallway is the best option.

If the corridor is the only comfortable spot for a washing machine, the connection will not be difficult. The main thing is to follow the rules, taking into account the features of the equipment and premises:

  • Installing a washing machine in the corridor is possible if the area allows. On two square meters there is nowhere to turn around, let alone put a car. Take into account all the furniture, the door opening radius and the area of ​​​​the entire room so that the car fits completely and does not interfere with walking.

  • Distance from the sewer creates difficulties. Firstly, it will be necessary with their insufficient length. Secondly, such a connection will create an additional load on the pump, because of which it may serve less than the prescribed period.
  • If there is a niche, you can take the car into it, saving space. If there is no niche, you can build it yourself.
  • The dimensions of the machine must be taken into account. Give preference to a narrow model so that it fits perfectly.

  • If you do not want guests to get into the “laundry room” when entering the apartment, remove the typewriter from prying eyes.

Installation options

We will figure out how to hide the equipment and build it in so that it does not catch the eye and does not clutter up the apartment. Thanks to the entrepreneurial spirit and imagination of designers, there are a lot of ideas that will tell you how to install the machine, making it inconspicuous.

Option 1. Wardrobe

This washing machine is hidden in a closet. Instead of a cabinet, you can use a cabinet or cabinet with shelves for detergents.

Option 2. Door

How to embed a typewriter so that it is not visible at all? Do sliding door, as in a closet, and no one will guess that there is a powerful electrical appliance behind a beautiful door. Saving space along with convenience - you can place hangers nearby or hang shelves for washing products.

Option 3. Angle

If the task is not to hide the equipment, but simply to put it where it is convenient, the photo below shows such an option. There is little aesthetics in it, but it will be convenient to use the device.

Option 4. Curtain

Budget but no less interesting way- curtain. Today, the choice of textiles is so wide that you can pick up decent options that harmoniously fit into the interior and hide your "assistant". For fastening, use a special rod or cornice.

Is it possible to install SMA in the hallway? What about in the hallway? Of course you can! The main thing is to ensure that it is connected correctly and make sure that it does not distort interior solution. Connection details will be discussed below.

Home " headache» - how to hide hoses and tubes. If there is a kitchen or bathroom behind the wall near the SM, there will be no problems. But, if the washer is installed on the opposite side, how to connect it so that nothing interferes?

There is only one way out - to hide communications in the floor. But this is the task of the repairman. We will tell you about classic way connections:

  • Buy extended hoses for draining and water intake. Avoid docking, otherwise the risk of leaks will be high. It is advisable not to use hoses longer than 3 m.

Important! By extending the hose, in the event of a breakdown, you are unlikely to hand over the CMA for repair under warranty.

  • When connecting the drain, you must use a siphon or direct the hose directly into the sewer. We have already written about how to connect a washing machine to the sewer.

  • When connecting to the water supply, you can go in three ways:

If you have a separate exit in the wall water pipe, you can connect the drain hose there through the tap.

After connecting the "water" communications, take care of the electricity. The closer the outlet is to the car, the better. If there is no suitable outlet nearby, study the "" page.

To summarize: a washing machine is rarely placed in the hallway, but if everything is planned correctly and the appliance is connected correctly, no difficulties are expected.

It often happens that the size and layout of the kitchen do not allow you to install full refrigerator. But the whole kitchen revolves around him! Yes, and I want the room to be beautiful, make a good impression, be comfortable and functional. What to do if the size of the kitchen is only 5 m 2?

With this solution, you can easily create a comfortable and functional interior.

Ways to place the refrigerator:

  • If there is a small pantry next to the kitchen, the refrigerator can be placed there;
  • Disguising a refrigerator as a closet in the hallway or corridor;
  • Combination of kitchen with loggia.

One of the most acceptable and less expensive options is to place a refrigerator in the hallway. Yes, at first it seems that it is a little unusual, but over time you will find that it is convenient. In addition, the choice is small, when you have to choose between appliances that should be placed in the kitchen: a stove or a refrigerator.

Ways to place a refrigerator in the corridor:

  • AT special cabinet which was made to order;
  • In the corridor niche;
  • In a small corridor closet.

Placing a refrigerator in a closet has a number of advantages: a significant area of ​​​​space is freed up in the kitchen, a lot of light, a built-in refrigerator will not bother anyone. At the same time, the cabinet will continue to perform all its functions. You need to personally decide what cabinet design you want to see in your home.

hallway design with fridge

There is various options design.

Namely:

  1. If you decide to place the refrigerator outside the cabinet walls, great solution may be the construction of a small "window" in the corridor. This is done for a more convenient supply of products.
  2. When choosing refrigerator compartment it is worth considering the design of the hallway. Due to this, the refrigerator will fit perfectly into the room.
  3. Place the refrigerator so that it does not block the aisles.

The basic rules for installing a refrigerator in the corridor: silent operation of the unit, the design of the refrigerator is selected in accordance with the design of the room; correct location.

Washing machine in the hallway: is it worth it

The washing machine has become an indispensable thing in our time. However, at small sizes bathroom, it can easily not fit there. The corridor comes to the rescue. Should I put a washing machine in the hallway?

Rules for installing a washing machine in a small corridor or hallway:

  • Convenient location. The unit will not block the passages.
  • Correct placement of communications.
  • Suitable corridor sizes.
  • The right choice of technology - you should choose narrow models.
  • Compliance with the design of the room.
  • Compliance with the requirements of SNiP.

By adhering to these rules, you will be able to correctly mark the washing machine in the hallway. Correct connection washing machine is as follows. If the corridor is located next to the bathroom, then holes must be made in the wall, and hoses should be placed and connected through it. Another option is to hide all the hoses in flooring. This option requires more costs than the first one.

Connecting communications is possible using:

  • Squeeze sleeve, which is mounted in the pipe;
  • Fitting, when connected to a metal-plastic pipe;
  • A tee that connects to a sink or bath faucet.

If you decide to mount the washing machine in a closet, then you should take care of the presence of an outlet.

Installing a washing machine in a corridor closet

How to hide the unit? There are many different options.

For example:

  1. Placement of the washing machine in the closet. In this case, the cabinet will continue to perform its main function.
  2. Hiding a typewriter in a pencil case is one of the most best options placement of the machine. Built-in wall cabinet does not take up much space and is easy to use.
  3. Place the machine in a small bedside table.
  4. Placement behind the curtain is very convenient option, so the machine will not attract much attention.
  5. Do not hide the machine at all.

Certainly, last option it does not look aesthetically pleasing at all, and it should be used already in a hopeless situation.

Layout of the hallway with a refrigerator in the closet (video)

As you can see, if the dimensions of the room do not allow you to install the necessary equipment in the kitchen or bath, then you can place it in the corridor or hallway. The main thing is to adhere to the basic rules, and then the technique will not attract too much attention and will last for many years.

A rare hostess can do without a washing machine. There are many different modifications of this assistant. It is more customary to place it in the bathroom, in the kitchen. But it happens that the dimensions of these rooms do not allow to put even the most narrow model. An unexpected and convenient option then may be a washing machine in a closet in the corridor, which does not take up space in small bathroom or kitchen and hidden from prying eyes behind a furniture facade.

Washing machine in a closet in a narrow hallway.

This arrangement solves several problems at once: it does not change the style of the interior, saves space, and soundproofs equipment. But in order to properly connect the washing machine and aesthetically fit it into the interior, you should think through the whole process to the smallest detail.


Aesthetically fit into the interior of the machine.

Having decided that the washing machine in the hallway is the only possible variant, it is necessary to take into account the features of its placement:

  • The area of ​​the room and its shape. If the size of the hallway allows, you can arrange a laundry room in the closet, where you can place an additional dryer, laundry basket, cleaning products. For more modest opportunities, use a corner or niche to build a closet there.
Cars hidden behind a wardrobe.
  • Location of water supply and sewerage. The more remote the communications, the more likely it is to break. washing equipment due to the load on the pump.

Place the washing machine near the sewer.

Washing machine connection options

The washing machine should be installed closer to sewerage and plumbing. So perfect option- put it against the wall of the bathroom, bringing water through it directly. If the distance to communications is large, use long hoses, avoiding connections. Otherwise, leaks will be inevitable.

You can organize the water supply in one of the following ways:


A tee between the mixer and the water supply is another option for connecting the machine.


Tee in the bathroom.

Tee in the bathroom between the faucet for the typewriter. The position of the electrical outlet is also a point to consider: it is better if it is placed next to the machine. If not, consider installing it. The use of an extension cord is not advisable due to the dangerous proximity of water.


Outlet next to the washing machine.

Ways to disguise this technique

Installing a washing machine in the hallway requires extra effort to disguise it, because you don’t want to bring guests through the laundry room.


Washing machine cabinet

The cabinet for the washing machine can be made of various materials:


Closet for washing machine can be built-in or floor. Hinged structuregreat option for compact model. The shape of the cabinet can be angular or straight.


Direct cabinet for a typewriter.

Cabinet doors are installed taking into account the possibilities of the room and the type of loading of the machine. They are hinged, sliding, folding. Vertical blinds can also serve as sashes.


swing doors closet in the hallway.

A washing machine placed in a closet in the hallway is an unusual, often forced decision. But if you think through all the details of its installation, it will serve you faithfully and at the same time not spoil appearance apartments.


Washing machine located in the closet in the hallway.

Video: Washing machine in the corridor closet

Photo gallery: Types of cabinets for a washing machine in the corridor