How to clean aluminum gas stove burners. Electric stove care

The stove is the main attribute of any kitchen. During the cooking process, some greasy spots will definitely remain on the surface of this plate, and it is not always possible to remove them immediately. Therefore, the question arises, how to clean the stove from soot and fat at home? In this article, you will learn how to quickly cope with such a task with a minimum of effort.

How to wash stains and burnt spots?

Cleaning a gas stove from soot is actually not as difficult as it might seem at first glance. If pick up suitable means and act in a certain way, the entire plaque is easily cleaned off.

You will need:

• soda ash 3 tbsp. l.;
• any washing powder½ st. l.;
• stationery glue (glass, not PVA) - 1 tbsp. l.

To use this tool:

1. Pour everything in 1 glass of cool water and shake.
2. Apply a thin layer of the mixture to the surface of your stove.
3. If the mixture turns out to be a little larger and powder crystals are visible on the surface of the plate, there is no need to be scared - this phenomenon is not critical, it can be left as it is.
4. In the process of washing, after 15-20 minutes of waiting, it is necessary to thoroughly moisten with water.

As a result, all the dirt will come off with the mixture without any effort on your part.

We clean the stove - what to consider?

In the room where the food is prepared, perfect cleanliness must be observed:

1. Soap splashes that appeared on the tiles near the sink, as well as wet spots on the surface of the desktop and the floor, are removed with the most elementary dishwashing detergents - there are no problems here.
2. As for the stove, burnt fat is not so easy to clean out. If no one has washed a very dirty stove for a long time, a huge layer of burnt fat will fill the entire space between the burners. That is why it is necessary to have suitable tools on hand to clean the stove from soot and grease at home.

Important! Since plates are made today from different materials and with different coatings

We wash grease from a metal plate

Increasingly popular in last years become hobs that are made of stainless steel. They look spectacular, inspire confidence with their solidity, which is how they differ from outdated enamel, as well as tempered glass. But the polished metal surface certainly requires special care, because absolutely all stains and splashes are quite clearly visible on it.

Important! Oily drops at home are easier to clean if they are still fresh, so the stove must be washed every evening:

• if the fat is not burnt, an ordinary sponge is enough, as well as any dishwashing detergent;
• you can also wipe the stove with a lemon slice - wait until lemon acid absorbed into the dirt for 15-20 minutes and wipe metal surface with a clean sponge, there will be no more streaks.

Soap and soda solution

This tool corrodes grease perfectly, so you don’t have to rub the surface to clean the stove from soot and grease at home:

1. Mix a couple of tablespoons of baking soda with liquid soap. Add some water.
2. Apply the solution to the board surface.
3. Wait 15-20 minutes.
4. Wipe with a clean sponge.

Important! If you have a stove of stainless steel, please note that products containing:

• chlorine;
• acid;
• abrasive particles.

Modern ways

Market household chemicals Offers a wide range of cleaning products metal plates. They are sold in containers with dispensers. The composition of these funds includes: surfactants, orthophosphates, titanium oxides and other caustic substances that perfectly destroy fat. Which brand to prefer - decide for yourself. At the same time, you can focus on the frequent choice of buyers: “Cilit”, “CIF”, “Shumanit”, “Topperr”, “Homestar”, “Sanitol”.

Important! If you haven't washed your stove in a long time, you can try a grill cleaner, which is used to clean ovens and cabinets in food service establishments. These products are incredibly caustic, so be sure to wear gloves before using them and protect your mucous membranes.

If you have a steam cleaner, it will great option to clean the stove from soot and grease at home in just 5 minutes. Hot steam perfectly destroys all drips, as well as splashes of fat without any chemicals, and at the same time leaves no traces behind.

How to clean grease from glass and enamel hobs?

To wash enameled hobs, cleaning products that contain abrasives are not suitable. Any solid particles will simply scratch the enamel and thereby ruin it. appearance. For this simple reason, the use of metal brushes is also unacceptable. It is allowed to wash the enamel only with a soft sponge with creamy cleaning agents.

How to clean the stove in the kitchen from fat, if the fat is old?

Old fat on the stove is a real misfortune, since peeling it off the surface can also damage the material of the stove itself. Therefore, in this case, it is necessary to use effective, but at the same time, delicate means. Options may be as follows.

Method 1

Baking soda, in combination with other products available in every home, can help you clean the stove of old grease:

1. Apply over vinegar treated or lemon juice surface of baking soda.
2. As a result, there will be a reaction between acid and alkali, which will help you deal with chronic fat.

Important! When using this method, allow the substances to react for 15-20 minutes and then rinse thoroughly and gently with a dry, clean cloth.

Method 2

1. Apply mustard gruel to the contaminated surface for 15-20 minutes.
2. Rub a little and rinse with cool water.

Important! For particularly stubborn dirt, you can use refined gasoline. Apply it on oily spots, wait for 10-15 minutes, rinse.

How to clean burners, switches, grates on the stove from soot:

• In order to clear gas burners, remove them and place them in a foamy solution of dishwashing detergent and water for 15-20 minutes, rub with the rough side of a sponge, rinse with water and wipe dry.
• To remove dirt from switches, the best option will use cotton buds either cotton pads, which you pre-moisten in ammonia or ammonia-anise drops.
• Handles fairly well greasy spots on the switches and a slurry of soda. For hard-to-reach places, it is best to use an old one. toothbrush.
• To clean the grates on the hob, put them in a large container or in the bathroom and pour hot water. Add dishwashing detergent to the water and leave for 1 hour or even 1 night to detergent better effect on pollution.

The most effective way to remove stubborn fat

In case you failed to keep track and old stains from burnt fat remain, prepare a very strong solution, which includes the following components:

• 250 ml of water;
• 1 st. l. silicate office glue;
• 30 g grated laundry soap with a coarse grater or 1 tsp. powder;
• 3 art. l. baking soda.

Carefully place all components in one container, apply to the surface. In the event that the handles are made of exactly the same material as the stove itself, then on them, and wash off after a few hours. After that, wipe dry and polish with the addition of special polishing agents.

Important! This cleaner is best suited for cleaning stainless steel stoves and hobs.

We hope that our advice and recommendations will help you in this eternal and difficult struggle against burnt fat on the surface. cooker. In the future, try to avoid hardened stains, and if possible, immediately wipe the surface of the hobs, clean the burners after cooking. Then you will spend less time caring for the equipment, and it, in turn, will serve you longer and retain an attractive appearance.

Electric stove maintenance.

Glass ceramics do not like aluminum, sugar and plastic.
Do not clean glass ceramics with a knife, brush, steel wool or abrasive cleaners.

To care for glass-ceramic surfaces, there are special cleaning products and tools - scrapers. Despite the cost, the effect of using these funds should also be noted. The glass-ceramic surface will be much easier to maintain in a perfectly clean condition, since the product not only removes limescale, food residues and grease stains, but also creates a thin protective silicone film. The film prevents the build-up of food residues and grease, facilitates the cleaning process and protects the surface from liquids with a high sugar content.

AEG recommends: “First use a scraper to remove food debris. Aluminum foil, melted plastic and burnt sugar are best removed while the surface is warm. If this happens, you should warm up the stove again so that the contaminants melt. Then it is easier to scrape them off with a scraper. Then the surface must be allowed to cool and apply a special glass-ceramic cleaner to it, gently rubbing it. soft cloth or paper towel. The surface is then carefully cleaned. wet towel and wipe dry.

At first glance, everything is simple and clear. But there are some nuances that should be considered in some cases.

Do not wipe the surface with a sponge for washing dishes, because. traces of detergent or grease may remain on it, when the stove is turned on, they burn out, which leads to discoloration of the surface. The glass ceramics around the burners can be cleaned with soap and water using a soft, clean cloth.

Splashes of grease, limescale, water marks and stains that change the color of the surface are removed with steel cleaners or special compositions for the care of glass ceramics. Detergents should only be applied to the completely cooled panel. After cleaning, they must be completely removed from the surface being cleaned, as they can have a corrosive effect on the glass-ceramic coating.

Limescale can be removed with a mild vinegar solution. If used for care glass-ceramic surface dishwashing liquid, bluish stains may remain on it. They do not affect the operation of the device, but are not always removed even with special compounds.

Stain removers and oven sprays should not be used to clean glass ceramics.

Ardo experts believe that glass ceramics can be cleaned with glass cleaners.

Avoid contact with the hob particulate matter- for example, grains of sand. They can damage the glass-ceramic surface.

The burners must always be kept dry, wet pans or splashes of salt water have a negative effect on glass ceramics.

What can be used from improvised means for cleaning glass ceramics? The owners recommend:

Good cleanser hob considered drinking soda. Wet powder is applied to the surface with a damp cloth and perfectly removes dirt.

For creating protective film after washing the glass ceramics, wipe the panel with a soft cloth moistened with a small amount of vegetable oil.

When washing the oven, be careful not to damage the rubber seal. It can be removed by removing the brackets from the holes.

So that the walls of the oven in the gas stove do not rust, you need to rub it with fine table salt every time after use.

Glass ceramic cleaning.

On the glass-ceramic stove, it is impossible to leave the "escaped" liquid until it dries or burns. Wipe it off with a sponge or cloth as soon as possible, even if the surface is still hot. Remove dried dirt with a special scraper, and if it is not there, with a regular disposable razor.

Shouldn't be washed glass-ceramic panel detergents containing abrasives. Dry or dirty rags can do a bad job. Any glass cleaner is best suited for cleaning glass ceramics.

glass ceramic hob

And special attention should be paid to the glass-ceramic stove:
firstly, it does not tolerate sugar - sugar smudges (for example, when cooking jam) can completely ruin the stove;
secondly, in no case should you use abrasive cleaning products - the surface will instantly lose its smoothness and shine;
thirdly, splashing water on a hot stove can greatly damage the surface;
fourthly, you should not put wet dishes on a heated stove - there will be hard-to-remove traces.

Glass ceramic cleaning:

Special scrapers for such plates, and no scratching with a knife to scrape off dried residues;
- special wipes or paper towels, but no dirty wet rags or wet sponges for washing dishes;
- dishwashing detergents leave a "gasoline" coating, so it is better to use specialized means for glass ceramics.

Electric stove maintenance.

Everyone who deals with cooking knows that it inevitably ends up on the stove. Therefore, it is better to clean the electric stove daily, then cleaning will not be difficult. If the plate is not washed for several days, food residues burn to its surface and form a dense, hard-to-wash off crust. Clear her by conventional means already difficult, but if you use for this metal objects and sandpaper, you can damage the enamel.
The first time the stove is washed with a warm solution of baking soda or laundry soap immediately after it is installed. This is necessary to remove the grease that protects the burners and stove parts from corrosion. Then all parts of the plate are wiped dry. After that, the stove must be warmed up in order for the lubrication of the internal parts to burn out. The burners are turned on at the 2nd - 3rd stage, and the thermostat of the cabinet is set to 200 "C. The stove is heated for 30 - 40 minutes, while it is necessary to open the window in the kitchen and close the door tightly.
Most often include electric burners with a power of 1500 watts. Because of this, they fail more often than others. Burners with a power of 1000 W last 3-4 times longer, as they are turned on less often. Given this circumstance, you need to think about which burner to turn on. If dinner is being prepared, it is better to put the pan on a small burner, while only a few minutes are lost on cooking, since maximum power needed only when boiling. But less electricity is consumed, and a large burner will last longer.
Burner bodies are made of cast iron, which is quite fragile and requires careful handling. When heated, thermal stresses arise in the body of the burners, which are greater, the higher the temperature. They lead to cracking of the burners. To prevent this from happening, the following recommendations must be observed.

Do not turn on the burner at full power without dishes! If, for any reason, the hotplate has been switched on and has become red hot, it must be immediately switched off and allowed to cool down. Do not attempt to cool the burners with pots of cold water.
Do not place cookware with a wet bottom on the burners - this causes intense corrosion of the burner. At a pot with a wet bottom, the water vapor will lift the pot, and it will bounce and make a bang sound. Cookware with a smaller diameter and an uneven bottom causes the burner to overheat, which reduces its service life and increases energy consumption.
The surface of the burners of Yugoslav and some other stoves is coated with an anti-corrosion compound, so they cannot be cleaned with metal brushes.
It is strictly forbidden to use an electric stove as a heating device.
Organic residues cause corrosion and create a gap between the burner and the bottom of the cookware. Therefore, as the burners get dirty, they must be cleaned, carefully removing these residues.

Before cleaning, the switch handles are set to the zero position and the stove is disconnected from the mains. The surface of the burners is wiped with a sponge dipped in soapy water. If you need to remove badly burnt food residues, use a wooden spatula or a wire washcloth. The washed burner is wiped dry and for final drying it is turned on for 1 - 2 minutes.
It is recommended to wipe the surface of the burners from time to time with a cloth slightly dampened with vegetable oil. This protects the burners from corrosion. When preserving electric stoves (for example, in a summer house for the winter), the burners are covered with a thicker layer of lubricant.
chrome plated support ring, with which the burner is attached, over time from exposure high temperature turns yellow. There is no need to try to clean the yellowness, as it results from an irreversible chemical change in the coating, and cleaning the ring can only damage it.
Since food is cooked in the oven no more than 1 - 2 times a week, it is advisable to wash it after each use.
For cleaning ovens and other surfaces covered with enamel (hobs and front panel), it is not recommended to use powder detergents (adsorption-abrasive). Most suitable for these purposes laundry soap, warm solution baking soda or a mixture thereof (10-15 g of soda, 10 -
15 g of soap per 1 liter hot water). You can use liquid (flotation) detergents.

If the cabinet is heavily soiled, it should be turned on at the maximum temperature and warmed up for 40-50 minutes, while some of the food residues will burn.
Do not put on the bottom of the cabinet aluminum foil so that it doesn't get dirty. This can damage the enamel.
To prevent the baking sheet from warping and cracking the enamel, it must not be placed hot under cold water.

Cleaning pancake burners

If you use water to clean solid cast iron burners, the metal will change color and unsightly stains will form on them. rust spots. Instead, heat the burner and turn off the stove. Heating will char what has fallen on the burner, which will facilitate its removal with a dry washcloth pad made of synthetic sponge after the burner has completely cooled. Never use wire wool.

Refreshing the surface of the burner

To restore the uniform dark gray color of the burners, use a proprietary product that, in addition to refreshing the appearance, will also protect the metal. After cleaning the burner, evenly apply the reducing agent to the lukewarm burner, and then turn it to the middle position to consolidate the effect.
Alternatively, put a few drops of frying oil on a cold burner and rub evenly with newspaper. Remove excess oil with a clean newspaper. When using the stove, the protective layer quickly disappears, so the oil should be applied every time you clean the burners.

Remove the dirt remaining in the grooves of the heating discs of the electric stove by sprinkling it with a small amount of baking powder, then wiping it with a damp sponge and washing it off with clean water.
If you have used the oven 2-3 times and never washed it, prepare special compound to soften stains. Finely grate laundry soap, soak it in water and add soda. Wipe the walls of the oven with the resulting gruel.
If something escapes onto the stove while cooking, immediately wipe the stove with a drop of vinegar on it to reduce the burning smell.
To clean the microwave, it will be enough to put a deep plate of water in it for a few minutes. The hot steam will soak up any accumulated dirt and grease. You just have to wipe the inner surface with a sponge with a cleaning solution and wipe the oven dry.
Splashes of hard water leave traces that are difficult to wash off on the glazed surface of the tile. To quickly get rid of them, wipe the tiled surface with a sponge moistened with a weak solution of ammonia, and then rub to a shine with a dry soft cloth.

To clean the oven, pour some water on a baking sheet and place it in the oven for 30 minutes at 50 degrees (with bottom oven heat). After that, wipe the walls with a damp sponge, removing steamed fat residues. You can soften especially persistent fatty deposits with the help of ammonia, sprinkling them with a problematic place and letting them stand for a while. This is especially useful for cleaning the oven door.

How to properly clean burners? The process is quite simple, regardless of the type of stove or hob you have in your kitchen. First of all, you need to purchase special cleaning products for the type of plates that you are going to clean, sponges with an abrasive surface (in no case metal washcloths, as they can damage the surfaces being cleaned, which in the case of metal will lead to premature corrosion, and in in the case of glass and ceramics to reduce heat resistance) and special spatulas with blades in the case of glass ceramics.

Gas burners

Let's start with gas burners. Usually, either one large metal grate or several small ones, designed for one or two burners, are installed above the gas hob. These grids should be removed, soaked in a solution of normal detergent or special means for cleaning plates, and when the plaque gets wet enough to clean it off with the abrasive surface of the sponge, it is undesirable to use knives and blades, they will scratch the metal and reduce its resistance to corrosion.

Now back to the stove, remove the gas burners, disassemble and soak in the same solution, and then also gently clean with the hard side of the sponge (you can use a toothbrush). After washing, the burners must be dried, they can simply be laid out on a towel and wait, or you can warm them up in the oven.

After that, pay attention to what is under the comforter, wipe the surface with a damp cloth. There is a hole in it through which gas is supplied to the burner, take a piece of hard wire or straighten a paper clip, and insert it into the hole as deep as possible, just do not let it go there, the procedure can be repeated several times.

Now I need to clean myself hob and assemble the "constructor" in reverse order.

Electric burners

Let's move on to electric stoves. First of all, unplug your stove from the mains to avoid accidental switching on or electric shock. On the hob itself, it is necessary to apply a detergent designed specifically for this type of coating, usually it looks like a rather thick emulsion and wipe it with a hard sponge (not metal).

If you happen to be the owner of a stove with spiral burners, then first of all remove the rims surrounding the burner, soak them in a cleaning agent solution and wipe with a hard sponge. The surface under the rims should also be cleaned of dirt. Now lift the spiral (usually they rotate at the attachment point), remove all carbon deposits from the recess under the spiral with the same sponge and return everything to its place.

To clean solid cast iron burners they must be heated as much as possible, then cool and remove carbon deposits with a brush or a dry cloth (it is better not to use water at all because of the risk of corrosion). Then treat the slightly warm surface of the burners with a special anti-corrosion agent, which, among other things, will also restore their appearance, after applying the burners, it must be heated to average temperature and hold it in this position for a while. If you could not purchase such a tool, it does not matter: you can drop a little frying oil on the cold burners, rub it thoroughly over the surfaces and remove the excess with a dry cloth.

Glass ceramic burners

Quite a different story - glass-ceramic stoves: no matter what type of burners is installed there, it is not necessary to clean them, but the surface itself. A complete set for cleaning such a stove includes: a special cleaning paste, a scraper and a damp cloth. First, all carbon deposits are carefully removed with a scraper, then the paste is applied, after a few minutes the paste is removed with a clean soft cloth or paper towel, and in the final, the surface of the plate is polished with a damp cloth.

Be careful with your stoves, not only during cleaning, but also during use: it is always easier to remove fresh dirt than to clean off age-old plaque.

"First BT" brings to your attention wonderful Gefest stoves.