Old new table - restoration and renovation with your own hands. Decor and decoration of the kitchen table: ideas and photos How to decorate the kitchen table

To update old table with your own hands, you can decorate it using the decoupage technique, make a beautiful painting or paint it in your favorite shade.

Even the most durable and reliable dining table will sooner or later lose its gloss and look, to put it mildly, unpresentable. Cracked varnish, chips and stains do not add beauty to it. But if he is still firmly on his feet, do not rush to throw him away. You can update the old table with your own hands, and it will come out much cheaper than buying new furniture.

Furniture painting

Having shown a little imagination with the help of acrylic paint, furniture can be changed beyond recognition, and not just update the color. For example, two-tone dyeing through tulle gives a stunning lace effect. And the richer the weaving pattern, the more interesting the picture on the tabletop will turn out.

The easiest way to decorate the old one does not require particularly large expenses, although you will have to work hard:

Carefully inspect the furniture for external defects and repair: glue it in the grooves, if the joints are dry, tighten the bolts.
If desired, the legs can be completely replaced or even carved balusters can be screwed instead of them - this is how you imagine the new look of the table.
Using sandpaper, remove any remaining paint or varnish from all surfaces. You will have to work in goggles and a thick gauze bandage. To speed up the process, it is better to use a belt grinder or grinder with a suitable disc.
Remove the resulting dust and putty all cracks and chips with your own hands. Putty is needed specifically designed for woodworking.
After drying, repeat sanding with a fine-grained abrasive, sweep and cover the table with stain. Today's choice of wood stains is large enough, so with the help of the right composition, wood can be given any natural shade.
When the stain is weathered, wooden surfaces must be primed, otherwise the paint layer will lie unevenly. Soil choose on an alkyd or shellac basis. It is applied in one layer, if you need two, it is better to take a break between them until it dries completely.
Do the sanding again with your own hands, but this time it's easy so as not to remove the protective layer to the tree.
Only now you can proceed to painting. Choose the cover especially carefully so that it can withstand frequent wet cleaning- It's a kitchen table. If it is possible to work outdoors, you can take alkyd enamel. In the apartment it is better to use safer acrylic compounds without smell. The paint is applied in 2-3 thin layers with intermediate drying.
Instead of paint, you can use varnish with any gloss effects or special wax. But the latter will need to be updated from time to time.

Even if the new table top is already dry, it is undesirable to use it for the first week. During this time, a layer of varnish or paint acquires maximum strength, and the updated furniture will last longer.

Mosaic

A table that will be not only beautiful, but also practical, is easy to get after lining with mosaics. It may be petty ceramic tile or colored shards planted in tile adhesive - use what is easier to find. It is very important to carefully align the mosaic layout on the countertop surface.

The seams between the elements should have the same thickness - this way the decor will look neater, so use special crosses for tiles.

At the end of the work, the remaining gaps are filled with latex grout in a contrasting color.

Decoupage

In this technique, not only countertops are decorated, but also chairs from the same set. The result is truly unique headsets of unprecedented beauty. Decoupage is good because it allows you to update almost any furniture with your own hands and hide minor surface defects. And it is performed as simply as a children's application, although it requires extreme accuracy.

Preparation of furniture is carried out in the same way as for painting. As a result, you should get an evenly primed or varnished table. light color- against such a background, the patterns are better visible. Any drawing is suitable - cut out with your own hands from holiday napkins or special thin paper for decoupage.

We decorate the old table:

Make a dry layout of the cut out pictures to imagine future view applications.
It is easy to outline the position of the patterns with a pencil.
Separate the images themselves from the extra paper layers, leaving only the top (the sheets for decoupage do not need to be stratified).
Put a napkin on a tight file front side down and cover with half diluted PVA glue.
Together with the file, turn the picture onto the tabletop.
Smooth the image without removing the film, and then carefully peel it off. Watch to thin paper did not reach for the file.

When all the drawings are transferred to the surface to be decorated in this way, they can be supplemented with painting or sparkles, and the table can be covered with several layers of transparent varnish. To make them lie as evenly as possible, it is better to use formulations in the form of aerosols. You can artificially age the table with the help of craquelure varnish, but this is already an amateur.

self-adhesive

Such a dense film will always help out if you need to quickly update old furniture. But if it is not suitable for working with paneled facades, then flat surface With its help, you can decorate without difficulty. With patterns that mimic a natural stone or wood grain self-adhesive film gives the table the look of not homemade furniture.

The main thing is when working with your own hands to prevent the appearance of bubbles and wrinkles on the film. To do this, do not remove the entire protective layer of paper at once, but separate only a few centimeters.

Then you can simply pull the sheet, forcing the film to stick evenly to the countertop, and smooth it in the direction of travel with a smooth wallpaper roller or soft cloth.

If the table, which has served faithfully for many years, is completely old, do not rush to throw it away. There are many ways to decorate an old table with your own hands and give it new life. Below is a master class on how to do this.

If the table itself is still strong, but there is just a loss appearance, then it can be updated and turned into a real pride of the owners. For today, hand-made is valued more than ever. There are a lot of ways to decorate an old table. These include:

tiling;
painting;
painting on wood;
film wrapping;
decoupage;

Decoupage - a new look from napkins

You can update the table using decoupage without even having special skills. You can learn how to work in this technique with your own hands by studying any master class.

materials

For work you will need:

pictures for decoupage - you can replace them with ordinary napkins with your favorite pictures and even images from magazines;
acrylic varnish - it is best to buy varnish in a spray can;
PVA glue;
tassel;
napkin.

Instruction

Working process:

Clean the table from old layers, paint, dirt. Degrease the surface of the table by wiping it with a cloth with alcohol. If the surface is not completely cleaned, then the decoupage will turn out sloppy.

Pick up pictures and make a composition out of them. Any pictures will do - for the kitchen table, you can choose motifs of fruits and vegetables, different colors. A handmade table with motifs of ancient buildings will look very original.

Important : if special pictures for decoupage are used, then you don’t need to do anything with them - just stick them. If the pictures are cut from a napkin, then two-layer napkins must be divided into layers. If the picture is cut out of a magazine, then its bottom layer must be removed by wetting the picture and removing the layer with your own hands. Then the restoration of the table will be more accurate.

Arrange the cut out pictures on the table. Mix PVA glue with water in a ratio of 1: 1 and stick the pictures to the table in the selected places. To avoid the formation of bubbles, iron the pictures with a napkin, expelling excess bubbles. Next, the pictures should dry.

After the decoupage dries, the surface of the table with pictures must be varnished. Varnish for decoupage is applied in several steps. Each coat of varnish should dry well. The better this operation is carried out, the more resistant the table surface will be to moisture. Do-it-yourself decoupage is ready - such a restoration will be inexpensive, and the table will look very stylish. If decoupage is done carefully, then such a table can become a real decoration of the house.

We paint the surface

The surface of the old kitchen table can be painted with paints. Such a restoration is more suitable for an old wooden table. Painting does not always require special artistic skills and talents. detailed wizard the class will show that even a beginner in this business can do it.

materials

For work you will need:

paints - best acrylic, resistant to sun and water;
brushes;
stencils;
foam sponge;

Stages of work

Restoration begins with cleaning the surface of the table. If necessary, it must be sanded. Next, the surface is washed and degreased.

Drawings for painting can be found on the Internet or made by yourself. The master class advises to print the drawing and make a stencil out of it, carefully cutting out the contours of the elements with a clerical knife. When making a stencil, one must not forget to leave jumpers between paper elements. Then drawing will be easy. If you want to update the table, but there is no data for drawing or you don’t want to make a stencil, you can buy ready-made stencils in the shops finishing materials or art supplies.

You can update the table by applying a pattern in the form of a border along the edges or by making a complex composition of individual elements scattered over the surface of the table.

Further, the restoration of the table includes the application of paint on a stencil. There are subtleties here. So that the stencil does not move during operation, it is better to glue it around the perimeter masking tape. You need to take a little paint on the brush, otherwise the paint will spread and penetrate under the stencil, ruining the drawing.

Important : Instead of a brush, a sponge is often used, on which paint is drawn. The pattern applied with a sponge looks more even and uniform. Paint with this method of application practically does not flow and the risk of spoiling the work is minimal.

After the painting dries, the surface of the table is varnished. Lacquer is applied in several layers - it protects the painting from water and makes the surface more durable. The restoration of the table with your own hands is over.

Paint and only paint

You can update the table quite simply - by painting it entirely. To do this, select:

acrylic paints;
alkyd paints;
epoxy paints.

All of them are resistant to water and do not require additional protection lacquered surfaces.

Important : if the surface of the table is large, then it is best to paint it with a roller. This will give a uniform, even, "factory" surface. Such a restoration will be almost invisible to outsiders.

Self-adhesive film - the laziest way

Paint can be replaced self-adhesive film. Today there is a large number of film colors, so you can make any design of the table.

Before pasting the table, the surface must be thoroughly cleaned, rinsed and degreased. Next, the film is carefully glued to the surface and leveled - care must be taken not to form bubbles. This completes the restoration.

Tile decoration

You can update the table with your own hands if you decorate it with tiles. To do this, you can choose:

ceramic tiles;
mosaic tiles;
tiles made of composite plastic materials.

Important : It is convenient to work with tiles in the form of a mosaic. Such tiles are easy to cut with a knife, cutting off excess parts.

Restoration begins with cleaning and degreasing the surface. Then, using a special adhesive, the tile is glued to the surface. After a few hours, you can rub the joints between the tiles with grout or special paint for joints. A master class on this topic can be viewed on the Internet.

How to decorate the kitchen table with your own hands (video)

Updating the table yourself is not difficult at all. To do this, you just need to apply a little imagination and patience.

Bought, a place chosen for them, what's next? How to make the dining area in the kitchen cozy and beautiful? In this material you will find 8 ideas and 50 photo examples of how you can decorate a dining table, as well as the walls and space around it.

8 ways to decorate the dining area in the kitchen

Tip 1. Carpet is the best way to make a dining area stand out

The carpet will mark the boundaries dining area, visually highlight it and, moreover, make it more comfortable, especially if .

The shape of the carpet must be chosen in accordance with the shape of the table. For example, for round table you should choose a round or square carpet, and for rectangular table- rectangular (or oval).

For an easy-to-clean and non-staining carpet, choose a lint-free or short-pile nylon or wool rug.

Tip 2. A lamp hung directly above the table is the prerogative of not only the main dining room, but also the dining area in the kitchen

This technique will not only create pleasant lighting and highlight the dining area, but also give it a formal look. True, the transfer of the lamp from the center to the area above the table must be planned long before the repair. However, this can be done at any time.

It is desirable that the lamps can be easily adjusted in length. Then, lowering the ceiling / lampshade lower, you can create cozy light during the dinner. And lifting high to the ceiling - to create a general lighting of the kitchen. By the way, to illuminate the dining area, you should choose light bulbs of a warm yellow spectrum, then the food on the table will look more appetizing.

If moving the lamp is no longer possible, you can always put it on the wall near the table (example in the photo) or put table lamp on the windowsill if the dining area is located by the window.

Tip 3. Paintings, posters and other decor on the wall near the table will give the kitchen a complete look.

The design of the dining area almost always requires decorating the wall near the table with some kind of decor. A well-chosen decoration, for example, a picture, will be able to "make friends" incompatible elements of the situation, ennoble the interior, reflect your taste and will delight the household during meals.

Since the wall dining table always runs the risk of getting dirty, then decorating it with paintings or posters without glass is not worth it. If you would like to purchase Modular pictures or posters on stretchers, we recommend that you make sure that the image is printed with more durable eco-solvent inks and not pigment inks.

Traditionally, the walls at the dining table are decorated with:

Pictures.

Posters.

Such a poster old map peace can be ordered in any size on the site Artwall.ru.

Photos or photo posters.

Decorative plates.

You can decorate the wall near the table in a non-standard way, for example:

(large or, for example, in the form of the sun, fish eye).

Wooden boards.

Slate or cork board with messages.
Decorative trays, for example, Zhostovo as in the photo below.

Interior letters and words.
Empty frames.

Tip 4. Want to be cozy? Just put pillows on the chairs

Even the most simple chairs, bench, or stools can be made more comfortable and beautiful with pillows, capes (for example, fur) or covers. You will definitely have more laundry, but the kitchen will become very comfortable.

Tip 5. Tracks and / or underplates - ennoble and protect the table

While more suitable for festive serving, tracks and underplates are needed every day. Having in your stocks several sets of such "outfits" for the table, you can easily change the design of the dining area according to your mood.

If you have an old dining table that you hold dear as a keepsake, or you just want to save some money on buying new furniture, then you have to interesting job as a restorer or decorator.

Keep in mind that restoring a kitchen table with your own hands is not the easiest and, in some cases, not justified, because not every table can be repaired, and it is better to entrust antiques to professionals. But more often than not, the right "upgrade" can bring your old friend back to life and transform him beyond recognition.

How can the table be updated?

To update kitchen table with your own hands, you can use one of the following proven technologies:

Traditional painting - this is the method we will consider in detail in a step-by-step master class.

An interesting way of decorating and painting furniture is coloring through tulle - a tabletop is painted through it, and a lace pattern is formed according to the principle of a stencil.

Ceramic tiles will allow you to decorate a dilapidated, badly damaged countertop and make it more practical - you can put hot on such a surface and wash it in any way.

You can update the old table using decoupage technique. We will also talk about it in more detail.

An easy way to modify the table with your own hands quickly and on a budget is to paste over it with a self-adhesive film.
Burning will renew an undamaged wood surface.

Master class - 6 steps on the way to a new life

In this simple DIY dining table restoration tutorial, we'll be updating, repairing and repainting this old veneered table with a moderate amount of imperfections.

So, to update the kitchen table you will need:

a grinder or sandpaper of coarse, medium and fine grit, as well as glasses, a respirator and gloves;
alkyd enamel paint desired color(or other desired finish, such as stain), as well as a flat non-shedding paint or art brush;
primer for wood and a small roller / brush for priming;
wax paste or varnish.

Step 1. Inspect and repair parts

We carefully examine all the fasteners in the structure and the defects of the countertop - how much the veneer has delaminated or the tree has been damaged.

If the table is a little loose, then you just need to tighten all the screws. If it requires a more serious restoration, then you need to completely disassemble the table, re-fasten all the parts, or clean and sand all the grooves and joints in order to new glue better grabbed, fix the glued parts with clamps or self-tapping screws, and then remove them after 15 hours, when the glue dries completely.

Sometimes the underframe needs to be replaced, not only because its parts are very dilapidated, but also because the legs can completely modify your old table. For example, if earlier the legs were simple, now you can replace them with beautiful carved balusters.
When disassembling furniture, do not forget to mark the installation location of each of the parts, so you will not get confused and quickly complete the task.

Step 2. Remove the old coating

Now put on goggles and prepare 2 types of sandpaper: coarse-grained for primary processing and fine-grained for smoothing. Get ready for a long and laborious job - delete old paint or varnish is not a simple matter.

Step 3. We close up cracks and chips

After grinding, we carefully clean the table from dust, inspect the countertop and look for defects. Keep in mind that even the smallest damage will be visible after painting. All chips and cracks must be locally repaired with wood putty or polyester putty, and then sanded the entire surface again when the “patches” dry out.

Note - covering the table with stain:

if the countertop does not have severe damage, then you can not hide natural beauty wood and cover it with stain, and then with varnish, shellac or wax. The photo below shows an example of a restored table with a stained oak top.

Step 4. Prime and sand again

We continue to work. Now we need not only to clean the table, but also to degrease it. And after the table dries, proceed to the primer. This step is required, because without it paintwork lay unevenly and quickly get damaged. You can use an alkyd or shellac wood primer. In this master class, the universal alkyd primer Zinsser Cover Stain (pictured below) was used, which dries in just 1 hour, protects the wood well and prepares it for painting. It costs about 500-600 rubles, but is not sold everywhere. The table can be primed in 1-2 coats with a small sponge roller, allowing each coat to dry completely.

When the primer is dry (1 day), sand the countertop again with sandpaper or a medium-grit sanding sponge to smooth the primed surface and prepare it for painting. And don't forget to put your respirator back on!

Step 5. Now let's start painting.

It is very important to choose the right paint and its color. Avoid cheap paints, because this is a dining table, which means that the countertop should be well tolerated by frequent washing, rubbing, bumps, etc. In this case, a premium water-based alkyd enamel paint with a satin finish is used, but you can choose a more environmentally friendly acrylic-based enamel. Also, choose a quality brush with passion so that it does not shed in the process. Not a paintbrush, but a large flat art brush is perfect.

The paint must be applied in 2 thin layers, while finishing layer it is better to leave to dry for 3-4 days.

If you chose dark color paint, it is better to apply it in 3 thin layers;
To create scuffs in the style, the paint can be sanded in some places, for example, on the ends of the table;
Also, to create the effect of "antique", the table can be patinated.

Step 6. Apply a protective coating

As we have already said, you can protect the surface of the table with a varnish, for example, a water-based matte polyurethane (in the photo on the left is an excellent varnish from Varathane). It should be applied evenly in 2-3 thin layers, lightly sanding each layer before applying the next layer of varnish. Of course, all layers must be completely dry before sanding (4 hours).

The second option is wax protection, which will make the countertop matte and can be rubbed to a shine. To do this, the wax should be gently rubbed with a cotton cloth into the wood, then allow the first layer to dry for at least 1 hour. After that, polish the surface in a circular motion, and repeat the procedure 2 more times within one day. Well, now be patient and leave the table for 1 week so that the surface acquires the necessary operational properties.

Well, that's all - the restoration is completed, and the old table has found a new life in trendy white.

And here's another interesting video from the program "Cheap and cheerful" on the topic of restoring countertops at home from improvised means.

Updating the countertop with decoupage

If you do not want to stop there or your table does not have serious damage, but just needs a little update, then you can decorate the table with drawings: paint it acrylic paints manually, use stencils and stamps, or update the table with decoupage. Perhaps, it is this decor technique that is popular today that we will consider in more detail, because decoupage will not only allow you to quickly and budgetly transform the table or, for example, style it like Shabby chic (as in the photo below), but also hide some defects of the dilapidated surface.

To update the table with your own hands using the decoupage technique, you will need:

acrylic primer and acrylic paints - if desired;
putty for wood beige;
grinder and sandpaper varying degrees graininess;
rubber spatulas;
artistic flat and artificial brushes;
matte or semi-gloss varnish for wood;
napkins for decoupage or decoupage card;
scissors;
PVA glue or special glue for decoupage.

Decor using the decoupage technique can be started either after the stage of priming and polishing it (see step number 4 above), or after painting and varnishing. Then you should choose a picture - it can be any image on paper or table napkins, as well as a special rice paper for decoupage.

First, markup is performed, lightly marking with a pencil the places where the images will be located. We put the cut out paper image “face down” in a container with water and hold for half a minute. Then the soaked image is laid out in the same way “face down” on a plastic file, and all excess paper layers are rolled off. Then the picture is carefully smeared with glue and attached to the countertop. The file is not removed - through it the image is smoothed as much as possible.

The surface around the pictures is decorated with paint. The final stage of decoupage is varnishing with acrylic lacquer. After three days, the varnish will dry and the table can be fully used.

And finally, a selection of photos for your inspiration.

Beloved good old furniture you can give a second life. To make a table decor with your own hands, you should try a little, listen to the advice of experts and show your imagination. The result of the decor is guaranteed to exceed all expectations.

Preparation for work

In order for the work to go quickly and to be of high quality, it is necessary to determine what material the table was originally made of.

Wooden crafts. To clean the table of old paint with your own hands, you need to prepare tools such as a chisel, sharp knife, spatula, sometimes a planer can be useful for completely leveling the countertop. Old paint can be removed using these tools (it is also possible to remove paint with acetone, solvent, etc.), wipe sandpaper to smoothness, level the cracks with putty, carefully soak with an antiseptic, cover with a primer and allow the countertop to dry.
Hardware. You can remove old paint from metal with your own hands using special liquids like a solvent. You can get rid of rust on the countertop with a converter or use cola or vinegar at home. Any of these liquids should be applied to the surface and held for 20 minutes, then carefully removed.

Decoration methods

There are a lot of options on how to decorate products made of old wood or metal. The final result of the decor can be seen in the photo.

Adhesive tape

The easiest way to make an original practical table with your own hands is to paste over its countertop with a film, the assortment of which is quite diverse in construction stores. The self-adhesive film must be glued to the countertop, pressing firmly and rubbing it thoroughly so that there are no wrinkles and bubbles, and the pattern is not distorted.

The manufacture of such a table is the fastest in terms of time, because. does not require long drying. You just need to get used to it a little and not immediately remove the film, trying to stick it to the entire surface. It is recommended to gradually unwind the roll, processing small areas, gradually covering the entire surface of the countertop.

For better fixation of the "self-adhesive" on the ends of the countertop, the material is dried with a hairdryer

Mosaic

The decor of the countertop can be done by decorating with mosaics. It can be made from fragments old tiles, glass, pieces of discs and other small pieces of materials at hand. To do this, it is necessary to process the countertop in a way suitable for wood or metal, let it dry and cover it with PVA glue. Pieces of materials should be laid out arbitrarily in the form of a pattern or ornament and left to dry completely. Then open several times with varnish until the surface is perfectly smooth.

Ceramic tile

Table decoration can be done using the tiles left over from the previous repair. It can be plain or with a specific pattern. Making it easy enough in the usual way gluing tiles special glue. With this method of decor, an extraordinary flight for fantasy opens up. You can lay out the tiles in one or more rows, make an original drawing over the entire countertop, mark the corners or go around the perimeter. In any case, it will be practical, especially if the table is outdoors on the site.

Decorative tape

A very simple and original idea would be to update the kitchen table with your own hands, pasted over with decorative tape. This easy-to-use decor material can be combined in color to create a unique pattern to suit your taste. The technique of pasting with adhesive tape is similar to the process of decorating countertops with self-adhesive film. See above.

Epoxy resin

The decor of the dining table, made with the help of epoxy paint. This liquid solidifies and turns into transparent plastic, filling cracks and depressions on the countertop. To create original drawings on the table, you can put small flowers, pebbles, shells and other small items into these dimples at your discretion. This creates the effect of frozen time in compositions reminiscent of amber, but without the characteristic orange color.

Glass decor

For a table reminiscent of an exposition of a local history museum, suitable original decor under glass. To do this, you need to make a recess of any geometric shape and fill it with shells, colored sand, dried marine life in the form of stars, hedgehogs, etc., as well as dry flowers, pebbles or glass fragments. Then cover the recess with glass of a similar shape.

Tulle decoration

The design of the table, made by staining through tulle, will look very gentle and elegant. To do this, firmly attach the tulle to the surface and carefully cover the table with spray paint. Then very carefully remove the material. It should be remembered that the part covered with tulle will have original color table, and the background will be painted with spray paint. Based on this, it is initially worth deciding on the shade of the openwork pattern and coloring the table with it. Only after complete drying is it recommended to start attaching the tulle and further decorating the tabletop.

For decorating using the stencil technique, you will need old tulle or unnecessary lace doilies(after decorating they will have to be thrown out)

Gilding

For making a decorated dining table or coffee table with your own hands, you can apply an exquisite way of decor - gilding. This can be achieved by painting the countertop with paint with a gilding effect, or by applying gold leaf. This thin foil is cut out with scissors and glued to the table surface using PVA glue. Then they wait for complete drying and cover with a colorless varnish. The golden pattern will perfectly complement the set, made in classical style. If desired, you can arrange all the furniture in this way.

Decoupage

To design a drawing in a decoupage way, it is necessary to cut out the drawings you like from napkins, carefully remove the bottom layer of paper and attach the cutouts to the surface in the design that you liked the most. Then dip the brush into the PVA glue and lightly smear the top. In this case, it is necessary to take care of a uniform snug fit of the pattern to the table so that there are no folds and irregularities. If the paper is wrinkled, gently wipe it with a sponge or a soft, lint-free cloth that has been moistened with warm water and repeat the decoration process again. After complete drying, cover the surface of the countertop with a transparent varnish. This way of decoration has received a separate recognition of hand-made lovers.

Craquelure

The method of using craquelure varnish helps to achieve the effect of antiquity and antiquity. It is used to age paintings and furniture, which later take on the appearance of cracked and peeling furniture. Work should begin with painting the surfaces in the color that was intended for the veins. Then the craquelure is applied directly, which can be one-step and two-step. When covering the table with one layer, after a while the varnish dries and cracks. Two-step craquelure is different in that it includes a combination of paint with epoxy resin and paints with water base. As a result, after varnishing, cracking occurs and a characteristic surface is formed.

Artistic scribing

This method of decor involves applying drawings to the surface with a brush and acrylic paints using stencils or tracing paper. To decorate the table by painting, it is necessary to prepare its countertop for production traditional way described above for wood or metal. Then you should apply the drawings in the usual way for the master in any execution. After complete drying, it is necessary to apply one or two coats of varnish with an interval for drying. After 2-3 days the table will be ready for use.

It is very easy to create a unique creation in the form of a table yourself. This work is interesting and fascinating, and the result of the decor will definitely delight and cheer up all the relatives and friends of a real master.

Video: how to quickly and inexpensively transform the kitchen tabletop.

Categories

Popular