Vinyl wallpaper on non-woven base - how to glue on walls and ceiling? Sticking vinyl wallpaper

Non-woven vinyl wallpaper combines the strength and practicality of vinyl, and the elasticity and lightness of non-woven. This type of product is increasingly preferred over other materials for wall decor for another reason - they are easy to glue. If you have ever worked with paper wallpaper, then all the more you can stick vinyl on a non-woven base with your own hands.

Sticking features

Unlike other types of wallpaper, when working with a non-woven base, glue is applied exclusively to the surface of the wall. This saves time, simplifies the workflow and wastes less glue. Pasting is also faster because this type of wallpaper is often produced in rolls 1 meter wide, so it can take half the time to work than with paper-based wallpaper.

Gluing is carried out by the “butt to joint” method, and the seams are practically invisible. It seems that the walls are covered with a solid canvas and appearance rooms wins aesthetically. From which side to start work does not matter - you can choose any angle from which it is more convenient for you.

Surface preparation

If it is possible to dismantle the skirting boards, then it is better to do this immediately, as they will interfere with the process and the wallpaper will have to be trimmed from below with scissors. Moreover, during puttying, the plinth can get dirty.

The walls are cleaned from the old coating. All large holes and cracks are sealed with the starting putty and left until hardened. After that, the surface of the walls is puttied with a finishing putty with a continuous thin layer, and after drying, it is treated with soil.

The use of a primer is mandatory: it will not allow the putty to quickly absorb the glue, so you have time to glue a wide sheet until the wall is dry. It also improves the adhesion of the wallpaper to the surface.

In addition to wallpaper and special glue, you will need tools for work:

  • Level.
  • Pencil.
  • Wide brush (maklovitsa).
  • Plastic spatula for wallpaper.
  • Wide metal spatula.
  • Rubber or foam roller.
  • Scissors or construction knife.
  • Enameled or plastic container for dilution of glue.

Work technique

AT suitable capacity diluted wallpaper glue in proportion to the water indicated on the package. The glue does not form lumps if it is poured into a vessel with water in a thin stream and stirred at the same time.

  • While the glue swells, you can prepare part of the sheets. The distance from the ceiling to the floor is measured, and deposited on an expanded sheet of wallpaper, after which the canvas is cut with a knife. You should not cut off all the pieces at once, two are enough for trying on - perhaps after gluing the first strips you decide that the canvas can be cut a little shorter due to the height of the plinth.
  • Now a distance two cm less than the width of the roll is measured from the corner, and marked on the wall. Difficulty can arise with how to glue wallpaper in old houses, where the corners are likely to be uneven. It is necessary to mark the distance in several places, and draw a vertical line along the nearest mark to the corner.

  • With a wide brush, glue is evenly applied to the wall, not missed gaps are not allowed, otherwise air accumulations form under them. The corner and the junction are especially carefully processed.

  • Now the wallpaper strip is applied to the wall so that the edge of the canvas coincides with the drawn line along its entire length, and is smoothed with a plastic spatula, first in the center from top to bottom, and then from the center to the edges.

  • The edge is bent at the corners and pressed tightly into them with a spatula. The excess canvas remaining along the ceiling or near the plinth is pressed with a wide metal spatula, as seen in the photo below, after which a clear mark remains on the wallpaper, along which the strip is cut off with scissors or a wallpaper knife. The wall under the ceiling is once again smeared with glue, and the edge is tightly pressed tightly with a roller.

  • The next strip is glued in a similar way, but instead of the drawn line, you should focus on the edge of the previous strip. Sometimes there is a small gap or overlap between the canvases. This needs to be fixed immediately. The wallpaper slides easily on the wall smeared with glue, so the sheet just needs to be moved a couple of millimeters to the side. The joints are rolled with a small rubber roller.
  • Having reached the adjacent wall, the remaining distance from the edge of the strip to the corner is measured, and a piece of wallpaper is cut off a couple of centimeters bigger size. Having glued the strip into a corner, its edge is bent onto the adjacent wall. When the last piece of wallpaper is glued in, cut off a strip that exactly matches the dimensions so that the edge does not wrap onto the adjacent wall, and gently press the edge of the canvas into the corner with the edge of the spatula, turning it over to the side. How to do this, look at the photo below.

  • A visual representation of how to glue vinyl wallpapers on a non-woven basis, you can get it by watching the video tutorial below.

  • The principle of wallpapering on the ceiling is the same as on the walls. The surface is cleaned, repaired, puttied and covered with a primer. Then, stepping back from the wall to the width of the wallpaper, a straight line is drawn along the ceiling. It does not matter whether it is parallel to a long wall or a short one, since the joints will not be noticeable in any case.
  • In order to work comfortably, you need to properly build scaffolds. They should be stable and of such a height that, standing on them, it was easy to reach the ceiling with a hand bent at the elbow.

  • It is better to stick wallpaper on the ceiling with an assistant who will coat the surface of the ceiling with a roller on a long handle. The second person applies a strip of wallpaper along the drawn line and straightens it with a spatula or rubber roller. The next sheet is glued, joining with the previously glued strip, starting from one wall, and gradually moving towards the opposite side of the room. The ends of the strips are pressed into the corners with a spatula, and the excess is cut off with scissors.

What kind of wallpaper is better to paste over the walls? What reviews to read, how much such sticking will cost, and which manufacturing country makes better and modern wallpaper– Italy or Germany? How to glue correctly, how long does vinyl wallpaper dry, and can it be painted later, and is it worth it to paint at all? It's not even full list questions that the owners ask on the eve of the repair. All answers are detailed and in plain text.

You can, of course, just look for vinyl wallpapers, but it’s better to check with the seller what kind of wallpaper he offers you. The fact is that vinyl wallpaper can be either on the usual paper or non-woven base. Needless to say, the performance of non-woven vinyl will be a little more advantageous?

The non-woven base is different:

  • Leveling properties, that is, it allows you to hide small wall defects underneath, which is estimated as an absolute advantage;
  • Ease of installation - simple gluing, dry quickly;
  • Easy to use - many types of such wallpapers can be washed, which provides them with a longer use.

Not being a pro in repairs, never encountering such things, you can get confused in the types of wallpaper. For example, many people think that non-woven vinyl and just non-woven wallpaper are one and the same.

What is the difference between non-woven wallpaper and non-woven vinyl wallpaper

Non-woven decorative coatings can be divided into two types - non-woven with a paper top layer, and two-layer wallpaper, in which both layers are non-woven. The second type of wallpaper, of course, is considered the highest quality.

These wallpapers are not harmful to health, although there are a lot of myths about their harm that come from nowhere. High-quality non-woven wallpaper is by no means harmful, since the top and bottom layers of such wallpaper are made of cellulose, so the environmental friendliness of such wallpaper is not in dispute.

Vinyl wallpaper based on non-woven is a two-layer coating, where upper layer represented by polyvinyl chloride, and the bottom - non-woven base. If foamed vinyl is used, then the decorative layer will be embossed. Italy and Germany, suppliers of some of the best views wallpaper, use these characteristics of vinyl, because thanks to them you can get incredible effects. You can't tell right away what's on the wall ordinary wallpaper, not a layer decorative plaster or other texture.

What is the difference between vinyl wallpaper and paper (video)

Hot embossed non-woven vinyl wallpaper

The characteristics of hot embossed wallpaper can be considered enviable. What is hot stamping - this is a two-component coating, the base of which is non-woven, and the decorative layer is made of foamed vinyl. The material is passed through a heating chamber where the vinyl layer is softened. The surface itself is then processed with rollers, so the relief of the decorative layer is formed.

The difference between these wallpapers:

  • They are very durable, only fiberglass can compete with hot stamping wallpaper;
  • Sticking such wallpaper is not difficult - the level of adhesion is high, the wallpaper sticks well, stretches, and is easy to work with.

And, of course, it is worth talking about harm. About whether hot stamping wallpapers are harmful, the manufacturers themselves say with confidence - no, they are not harmful. At the same time, they foresee the following argument: in the very process of hot stamping, formaldehyde burns out of vinyl. Namely, formaldehydes are harmful to human health.

Designations on non-woven vinyl wallpaper

You can focus on the same designations that are found on other types of wallpaper. But before you directly paste the wallpaper on the wall, look at how many designations there are on the label.

The most commonly used designations are:

  • One wavy line. fresh spots removed with a sponge.
  • two wavy lines. Small dirt is removed with a damp sponge.
  • Three wavy lines. If the soiling is in principle soluble in water, soap and a damp sponge may be used.
  • Wavy line and brush. Naturally, we are talking about the fact that you can use a sponge and a brush (soft).
  • Three wavy lines and a brush. It is allowed to use a damp sponge, brush, soap or cleaning agent.

There are also designations that mean fitting the pattern, light fastness, and rules for how wallpaper is pasted and removed. These icons are almost all clear, they do not require decoding. Be sure to look at the designations listed above, which dictate what to wash and how to wash such wallpaper. Incorrect care harms the wallpaper, take care of it correctly, according to the instructions.

Vinyl wallpaper “Watercolor”: prints, collection (video)

Non-woven vinyl wallpaper: reviews

If you analyze the reviews, you can conditionally compile a list of the advantages and disadvantages of wallpaper, which are most often noted by buyers.

Pros and cons of non-woven vinyl wallpaper:

  • pros– wallpapers are durable, highly resistant to abrasion, high-quality, spectacular in appearance, affordable, easy to care for, a large selection.
  • Minuses- there may be problems with glue, sometimes even the wrong proportions are indicated on the glue packaging, which is why heavy wallpapers fall off.

Judging by the reviews, you can’t save on glue, and some even prefer to dilute wallpaper glue with PVA glue, assuring that a thicker composition holds the wallpaper better.

As for brands, German and Italian wallpapers are in the highest esteem. Italy is famous for keeping up with fashion and even ahead of it.

Germany is Hi-tech and subtle taste. And German wallpapers, and if the manufacturer is Italy, will not cost, let's say, three kopecks. Therefore, if you are assured that the wallpaper is branded, Italy, the latest collection, but a roll costs three hundred rubles, is it worth talking about quality.

Non-woven vinyl wallpaper: harm

And again about whether such wallpapers are harmful.

It’s worth starting with the fact that interlining is used today both here and there - in tablecloths, packaging materials, furniture covering, etc. Non-woven wallpaper, German, Italian or Russian, it doesn’t matter if their quality is not in doubt, if the price is not a penny, is it in any way harmful to health.

But there is no need to prove the harmfulness of cheap fakes. Cheap wallpapers purchased on the market, which significantly outperform wallpapers whose manufacturer is a brand with an excellent reputation (Germany, Italy), are definitely a dangerous purchase. Their harm lies in the fact that the manufacturing technologies are unknown, the materials are also unknown, you have no guarantee that really advanced technologies were used.

Further - about vinyl and harm. The most terrible harm, as mentioned above, is prescribed by formaldehydes. They are not only in vinyl, but also in linoleum, and in laminate, and in laminated furniture, and in carpets. True, at room temperature they are not released, but only when heated.

Therefore, if we are not talking about a fire and other force majeure that affects the release of these very formaldehydes, you definitely should not be afraid of poisoning them.

Non-woven vinyl wallpaper in the interior (video)

Frequently asked Questions

What glue to use for non-woven vinyl wallpaper, how long such wallpaper dries, how to stick it correctly, whether it is worth customizing the pattern or not, and how to do it right? .. There can be an infinite number of questions. Briefly and accurately - read on.

How to glue non-woven vinyl wallpaper

And now about how the sticker of such wallpaper on the wall takes place.

Do it right like this:

  • Prepare the walls(priming, cleaning, degreasing);
  • Strip preparation(cut not in the process, but in advance);
  • Paste the wallpaper back to back, from ceiling to floor, smoothing with a roller;
  • How to glue corners- in the corners there should be a joint, if the pattern allows, start gluing from the corner;
  • The ceiling is glued starting from the side of the window.

No less important than you will stick the wallpaper.

Which adhesive is best for non-woven vinyl wallpaper

Wallpaper glue in this case is selected from the type of wallpaper.

Vinyl wallpaper on non-woven fabric can be of three types:

  • First view when adhesive mixture applied only to the wall;
  • The second view, when the glue is applied exactly to the strip;
  • The third view, when glue has already been applied to the wallpaper.

Do not save on proportions when preparing wallpaper paste. Take glue for vinyl wallpaper, brands like Metilan have proven themselves well. As a rule, such wallpapers dry quickly.

Is it possible to wash non-woven vinyl wallpaper

You can wash if you saw such a designation on the wallpaper. How to wash - right, of course, just dispenses with water, a soft sponge. But delicate ones are also used. detergents, not powders, but soft, without solid particles.

Some wallpapers are also washed with a brush, but also soft, which does not deform the surface. The wallpaper then dries well, and dries quickly and evenly.

Is it possible to paint non-woven vinyl wallpaper

Vinyl wallpaper on a conventional paper base is not suitable for painting: both the vinyl layer and the paper layer will get wet. Therefore, you can only paint vinyl on non-woven fabric.

You can paint vinyl on non-woven fabric without the “for painting” designation, but difficulties may arise in the process. And they don’t dry like that, and how many layers of paint are unknown, and it’s also not clear what to paint with, and will there be any sense?

Therefore, if you want to paint, you need a material intended for that. And it’s not worth it to paint paper wallpapers through which vinyl (the old layer) shines through, and you won’t be able to paint with high quality, and ruin the wallpaper.

Well, if the question is how to remove old vinyl wallpaper, then a wallpaper tiger is suitable, which perfectly perforates the film.

How to glue vinyl non-woven wallpaper (video)

Vinyl wallpaper based on non-woven fabric is strong, durable, beautiful and modern coating. They dry quickly, foam materials give a chic relief, and how many other attractive sides open up - ease of care, the ability to wash (and after washing they dry quickly), design experiments. Not the cheapest, but affordable wallpapers will serve you for a long time and will please both you and your guests with their spectacular appearance.

Finishing with non-woven and paper-based canvases gained particular popularity and deservedly took the leading place among building materials on the market. modern market. Easy to use, high specifications and the environmental friendliness of such materials allow you to stick them with your own hands on any complex uneven surfaces.

Advantages of non-woven wallpaper

Interlining - nonwoven fabric which is made by pressing. Unlike paper base building materials, non-woven has a multilayer structure, which makes it possible to hide minor flaws in the form of cracks and irregularities when gluing. Non-woven fabric does not deform or stretch during operation. They have a wider canvas, which allows you to quickly glue the material to the entire work surface. These and other qualities make interlining widely used in construction.

Work surface preparation

Before gluing any finishing materials, working wall must be thoroughly cleaned of old canvases. The procedure becomes more complicated if the walls need to be cleaned of old paper residues that were previously glued with wood glue or PVA. Separate such residues by pre-soaking them for a while warm water. When the paper is saturated with water, it is easier to separate them from the wall. It is only necessary to soak the walls in parts in order to have time to remove all soaked residues before they dry.

How to glue wallpaper on non-woven base

Gluing non-woven materials does not require special skills and knowledge. Can be glued to the following surfaces:

  • wooden;
  • plastered;
  • painted;
  • concrete;
  • drywall.

Good air permeability ensures free access of air and thus prevents the formation of mold and fungi under the finishing material. In order to properly glue non-woven fabrics on the walls, you need to know some of their features:

Vinyl wallpaper on non-woven base

Non-woven fabric can serve as the basis for vinyl wallpaper. In this case, the top decorative layer is made of polyvinyl chloride composition. This is one of the widely used types of wallpapers. Such wallpapers have all the advantages of a non-woven finishing material, but the big advantage is diversity colors, pattern and texture. Vinyl wallpapers are produced with smooth surface and embossed embossed pattern. A wide range will allow you to quickly choose a canvas for any interior.

It is possible to use such canvases in the kitchen with high humidity. Vinyl coating allows you to use a damp sponge for wiping when cleaning the wallpaper. Settled dust on embossed wallpaper is easy to remove with a vacuum cleaner. A variety of textures of the vinyl layer gives wide opportunities for the design of any room.

Features of gluing vinyl wallpaper

When it becomes necessary to re-paste non-woven vinyl wallpaper, remove wall covering down to the base is not necessary. It will be more correct and easier to remove the top vinyl layer and leave the non-woven base for further use as a leveling base for new coatings. Vinyl wallpaper can be applied to both walls and ceilings.. A dense non-woven base makes them easy to use and durable.

The only drawback is the airtightness of PVC. This deficiency can cause mold and a characteristic odor, so it is recommended to use an adhesive composition with antifungal properties. But modern technology The production of building materials is improving every day, and wallpaper with a breathable foam layer of polyvinyl chloride has appeared on sale. Although these are easily deformed, it is better to use non-woven vinyl foam wallpaper for pasting the surface in children's and bedrooms.

Sticking vinyl wallpaper on non-woven base

Measure before starting work required amount canvases. If it is wallpaper with a pattern, it is necessary to number the strips according to the sequence of gluing. Wallpapering on a non-woven basis is done end-to-end. Behind the radiators, due to difficult access, you can not glue the material, but simply paint it to match the main color. But if necessary, glue not a solid canvas, but small stripes.

Sticking building material near outlets and switches produced strictly with disabled electric shock . Remove fittings and glue strips in the usual way. Make an incision crosswise in the place of sockets and switches, move the canvas, freeing the openings. After complete drying, insert the fittings into place.

For surface finishing with vinyl products, use only a special adhesive for heavy finishing materials. The concentration of glue can be thicker than recommended on the package and when applied to the wall, you should not save it. Excess adhesive residues and air are expelled with a rubber roller or spatula from the center of the strip to the edges. Residues of glue are quickly removed from the canvas. The rest of the gluing process vinyl flooring the same as that of ordinary non-woven.

Ease of use and dismantling makes non-woven vinyl wallpaper very popular and in demand.

For changing paper wallpaper analogues came on a non-woven basis, which differ not only increased strength and wear resistance of the material, but also the technology of gluing. In that step by step master class we will consider in detail the pasting of walls with our own hands using the example of meter-long non-woven wallpaper: we will learn how to properly prepare the surface for finishing, apply adhesive, measure the length of the canvas and join the corners.

Step 1: Tools, choosing and mixing glue

: delete old finish, level the surface with plaster and prime it. Putting together a set of tools for work. To stick non-woven wallpaper, you will need: a pencil, a plumb line or a laser level, a spatula 35x40cm, a knife with sharp blade, tape measure, brush, ordinary roller with a short pile and rubber for smoothing canvases, joints. We prepared the tools, now we will knead the glue. For work, we choose a universal or special glue for non-woven wallpaper. We advise you to use the second option to save money and provide better grip. In our case, we use Quelyd "Special non-woven" glue, which is suitable for all types of non-woven wallpaper of any width. We dilute the composition with water according to the manufacturer's recommendations.

Step 2: Cutting the canvases

To measure the desired length of the strip, take a tape measure, measure the height from floor to ceiling and add 5 cm to the resulting value for the stock.

Our non-woven backing vinyl wallpapers are plain and do not need to be further customized. Therefore, we outline the length we need and cut a lot of strips. Drawing is more difficult. Here you will have to adjust according to the ornament through the specified distance on the package. There will be more waste with a pattern.

We fold the canvas and carefully cut off the excess with a construction knife with a sharp blade.

Step 3: Marking on the wall and applying glue

We mark the distance and put the first mark. Using a laser or a plumb line, we draw vertical lines every 50 cm in our case.

When working with non-woven wallpaper, we apply glue only on the walls and ceiling a little wider than the strip. Additionally, it is not necessary to impregnate the composition of the canvas. We apply the first strip strictly along the edges of the marked lines. Expel excess air rubber spatula, smooth the joints and press tightly against the wall. We take a sharp construction knife, cut off the excess from above and below under the spatula to get an even cut. We remove the glue that has come out with a dampened sponge. We continue to work, sticking wallpaper butt-to-butt.

Step 4: Working with the Corners - Proper Docking

We measure the width of the canvas from the edge of the previous strip to the corner and add 1 cm to the resulting value.

We paste the strip, going to the adjacent wall, and wrap the added centimeter.

We level everything, cut off the excess from above, from below and cut a strip that goes onto the adjacent wall.

We measure the second part of the canvas and make the final mark from the corner using a laser or a plumb line.

Apply glue and glue the strip on the other side of the corner. Carefully cut vertically with a spatula and a knife in the corner of the wallpaper, trying not to touch the bottom layer, remove the excess. After the edges of the canvases dry, they will press tightly and the seam will become invisible. Wipe off the remaining glue that has come through the finish.

Step 5: Gluing Around the Doorway

We reached the doorway. Since our wallpaper is plain, in order to save money, we skip the space above the doorway. Glue the stripes on the sides. If you have a finish with a pattern, you will not be able to skip the section. You will have to do everything consistently and adjust the ornament in order to avoid errors and inconsistencies.

When the walls on the sides are glued, we return to the area above the opening. We measure the length of the canvas from the ceiling to the edge of the opening, cut off and join the strip with the adjacent one.

On the other hand, the wallpaper turned out to overlap. We apply a ruler and cut through both strips.

Remove the cut off strip. Bend the edge and pull out the bottom strip.

Glue the edge in place and join the two canvases.

Sticking meter wallpaper on a non-woven base in the corridor is over. We enjoy the result.

wallpaper like finishing material have been used for a very long time, and in our time have become especially popular. Manufacturers do not get tired to please with new products in this category of goods, constantly improving, enhancing the appearance and improving quality characteristics this material. Vinyl wallpaper on a non-woven basis is famous for its special strength and durability. Not only do they look great, but they are a pleasure to work with. How to glue non-woven vinyl wallpaper? This is what will be discussed next.

What is needed for work?

Getting started, you need to prepare the actual non-woven vinyl wallpapers themselves and the glue suitable for them, and you will also need the following set of tools and materials:

  • Scissors and a sharp knife;
  • A bucket in which glue will be prepared;
  • Putty knife;
  • Plumb;
  • Rags;
  • Special roller for wallpaper;
  • A surface where it will be possible to work with a cut off wallpaper (a table will do for this).

The process of pasting walls with wallpaper cannot be called very simple and easy, as some efforts will have to be made. But choosing vinyl wallpaper in the store, this task is greatly simplified. It is important not to forget to immediately purchase high-quality glue, which is designed specifically for this type of wallpaper.


Stages of gluing vinyl wallpaper on non-woven base

The finishing of the walls is a very crucial moment, since the appearance of the room and the durability of the finish itself depend on it. Gluing non-woven vinyl wallpaper is a multi-stage process and consists of 7 steps.

1. Prepare wallpaper. This means that it is necessary, first of all, to check each roll for matching color and shade, after which you can start cutting the canvas. When cutting out the wallpaper, it is necessary to ensure that the drawings completely match and create a holistic pattern throughout the room. Before you start wallpapering, you need to prepare the walls, completely eliminating all defects.


2. Pasting the walls. When working with non-woven vinyl wallpaper, you can not overwork yourself with applying glue to the wallpaper itself, since it will be quite enough when applied only to the wall. True, it will not be superfluous to coat the edges of the canvas prepared for gluing, which will contribute to better fixation. In order for the wallpaper to lie in even stripes on the wall, it is necessary to make markings for the future strip using a level before starting work.


3. Corners require increased attention. When working with vinyl wallpaper, it is not necessary to use the “through the corner” or “into the corner” technique. Leaving an allowance of one canvas of 5 cm, it must be placed in a corner, and the next strip should be glued with an overlap. Passing the tip of the knife along the double joint, it will be possible to connect them together.


4. Sockets and switches must be completely de-energized at the time of work. Remove the boxes themselves and position the wallpaper correctly, and in the place of the socket or switch, make a cut crosswise, bending the corners inward. When the wallpaper is dry, you can install the removed elements back.


You can watch a video on how to glue non-woven vinyl wallpaper on our website, which will help you quickly and easily finishing walls with your own hands. And finally, some useful tips.

It is important that the room where the work is planned to be carried out has the same temperature. You should also take care that there are no drafts.

By not complying with these simple rules you can nullify all the work, since the wallpaper will not stick to the wall.

Video of gluing vinyl wallpaper on non-woven base

Fitting © 2022 Design and interior of apartments