DIY tire crafts: instructions on how to make interesting decorations and landscape design elements (105 photos). Crafts from tires (tires, wheels) - motorcycle from tires master class Design of a playground from wheels

The more colorful and varied the playground is, the more fun you can spend time on it. Even banal sandboxes and slides can bring a lot of joy to kids. And if skillful dads get down to business and make cars for the playground with their own hands, then the joy of the children will be no limit. For the manufacture of children's transport does not require expensive materials or complex tools. The work ahead is quite simple, even older children can be involved in it.

Transport for young riders

Game elements in the form of transport always attract the attention of kids. After all, sitting behind the wheel of an almost real truck or motorcycle, it is so easy to imagine yourself as a dashing racer.

The easiest way is to buy such a complex, but it is much more interesting to make it yourself. The main criteria that must be followed when making a car on the playground with your own hands are safety and aesthetics. All parts must be firmly fastened together, make sure that bolts and nails do not stick out. If the car is wooden, logs and boards are well cut off, protecting children's hands from splinters.

wooden train

Sawn wood train

Mobile sandbox

Idea for old tires

You can make a typewriter for a playground from a wide variety of improvised materials. Even if the game element only remotely resembles a real car, it doesn’t matter. Children's imagination knows no bounds, so a simple log can turn into a racing car or a passenger train. A mandatory attribute of any vehicle is the steering wheel. It will be great if it becomes real wheel. However, it can also be done independently, realism is not at all necessary.

Wooden children's cars

Look at the photo - these wooden playground cars look very nice. To create them, you only need boards, logs and a little bright paint.

You can use ready-made boxes of different sizes. A truck body or a whole bus will come out of a large container, and a cabin will come out of smaller containers. It looks interesting sandbox, beaten under the car. For this, the sides are made higher, wheels are attached to the sides, and a cabin in front.

simple wooden car

By the same principle, you can make an unusual motorcycle for the playground with your own hands. Its basis will be a small bench, logs will serve as a rudder. Wheels can be real or cut from OSB sheet.

Tire toy vehicles

It is very popular to decorate a playground with car tires. Game elements made of such material are durable and, most importantly, safe. Rubber is less traumatic than wood or iron parts.

For the little ones

You can easily make unusual cars or a motorcycle for a playground from old tires. Such transport is suitable even for the smallest children.

Metal game elements

Craftsmen who own welding machine can build a metal car. Such a complex, which includes a small horizontal bar or ladder, is perfect for older children. If the car is supposed to have a seat, it is better that it be wooden.

A machine from a real old body will cause special delight. It is enough to clean it from rust, paint it in bright color and attach the steering wheel. Thus, the thing intended for recycling will acquire new life.

Metal game complex from pipes

Instructions for creating a simple wooden car

To make a wooden car with your own hands, you will need carpentry tools: hacksaw, hammer, planer, as well as nails or self-tapping screws. The material will serve as boards and OSB sheets.

Stages of work on building a truck with a sandbox body:

1. Raw boards are well planed and polished before construction begins. They are impregnated with drying oil for resistance to decay.
2. They make at least an approximate drawing of the future truck on paper, indicating the main dimensions. Mark the contours of the body and cab on the ground. To make it convenient for children to play, the part with the sandbox is made spacious enough, for example, 180 by 100 cm. The body can be of any size, but such that the kids can go there.
3. In place of the body, they remove the soil with a layer of 30 cm, cover the bottom with geotextiles or tarpaulins so that the sand does not mix with the ground. Four posts 40 cm high are dug in at the corners. Boards are screwed to the posts, forming a sandbox box that serves as a body.
4. Close to the sandbox, they begin to build a cabin. To do this, they dig in columns at the corners of the passenger and engine compartments, then screw boards or cut sheets of OSB to them. The hood cover can be made lifting using conventional door hinges. The place under the opening hood will serve not only for games, but also for storing toys.
5. A steering wheel is attached to the cab, and wheels made of tires or cut out of logs are on the sides of the car. The finished wooden car is being painted.

sandbox car

Do-it-yourself tire car

It is even easier to make a car from tires for a playground with your own hands than from wood. For work you will need 11 old tires from passenger car, 2 seat boards and steering wheel.

Stages of work on creating a car from tires:

1. They mark the contours of the car right on the ground and lay out old tires on them in order to have an idea of ​​\u200b\u200bhow the finished car will look. Four tires are placed on the sides, simulating wheels. Five more pieces will go to the seats, and two more to the engine compartment.
2. Tires are removed and holes are dug under them. You don’t need to dig very deep, a third of the height for the wheels and half for the back will be enough. The distance between the wheels is made such that a seat fits between them.
3. They put the tires in place, after which they fall asleep with earth. At this stage, a steering wheel attached to a long pipe is installed. It must be firmly dug into the ground, because small racers will recklessly steer and can break the shaky structure.
4. Tires for seats are placed between the wheels, and on them are rather wide planks. The car is painted, decorated with headlights, old wheel covers.

Racing car from old wheels

Motorcycle for a playground from improvised materials

Making a play bike out of old tires is very easy. Two tires are dug into the ground one after another, and between them they leave a place to sit from a block of wood or plank. The steering wheel is obliquely fixed in the front tire. More complex models require three or four tires.

Stages of creating a motorcycle from four tires:

1. Mark the outlines of the motorcycle on the ground. If there is a small shop on the site, you can include it in the general ensemble, then you will need only three tires.
2. Two rear wheels are dug vertically to a third of the height, leaving a seat between them. The third wheel is driven in front.
3. Between the rear wheels, another tire and a board for sitting are laid. A steering wheel is attached to the front wheel.

Motorcycle for playground

There are a lot of design options for cars and motorcycles for playgrounds. The design can be complicated by adding additional tires or wooden elements. Undoubtedly, such a vehicle, made with love, will become the main place for children's games.

In past articles, we discussed in detail how to decorate garden plot and any other territory how to use dozens various ways and how to make a variety of creative and safe tires. Today we will raise the topic of children's sports grounds, which are one of the better ways recycling huge amount used rubber, thereby helping the environment, as well as arranging courtyards and children's sports grounds where the state is not able to take care of it. For example, in the countryside, in remote ordinary villages and poor villages cottage type it’s just that no one, except yourself, will build a playground that is so relevant for children in the summer.

Similar children's playgrounds are good large quantity a variety of projectiles in defiance of beautiful, bright, but very limited commercial courtyard structures. The main thing here is ideas, availability of hands and time. In addition to the wheels, you will need wood, as well as a lot of fasteners, bolts with nuts and sand, and maybe chains.

Remember that, despite the fact that children will walk on tires with their feet, rubber that has served its purpose on dirty and toxic roads must still be washed in a strong cleaning compound before use, then rinsing with high-pressure water.

So let's get started: ideas and short description. Pay attention in each example to the size and thickness of the tires and their parts. Key moment The assembly of such game considerations lies in the fact that each tire must rest against something above and below or be suspended from something - also most often both above and below, so as not to deform too much during use - under the weight of children.

First of all, it is, of course, bulk and hinged structures, along which you need to climb up: at an angle, vertically or onto a certain three-dimensional figure.

This is the simplest form - "Wall", when you need to climb on one side, climb over the crossbar from above and go down from the other side.

Vertical hanging wall made of tires on chains for older kids.

Another sloping wall where tires are nailed entirely to wooden canvas, and mulch or sand is poured between the tires and in them from below. Pay attention to the cable-cable going from above: you can climb the wall, grabbing the tires with your hands and resting your feet on the bottom ones, or you can climb, walking with your feet and sorting through the cable to keep the body position perpendicular to the canvas.

Analogue - without mulch, but tires different sizes so that the climb is absolutely safe, but a bit more difficult.

Again, a wall with a slope, but pay attention to the "goats" made of wood, as well as the fact that the two lower rows of the wall are made of tires, while the two upper rows above them are made of tire tubes.

Suspended wall with low slope for agility and balance training.

The same thing, but with a large slope and made of half car tire tubes:

An analogue is a hinged track made of tires.

All kinds of others volumetric structures for lasagna:

Worth doing in 3 levels

And here ladders were made of tires, and they dug into a mound of sand and earth. In some cases, they were used as a ladder for slides.

Finally, a very interesting general "swing" of tires (for the company of children), on which you can climb, sit, but almost never swing.

A variety of hanging structures of various formats between the bars or the side support of the tires: in the middle of the tire can hang or be fixed / lie statically, positioned vertically or horizontally.

The next idea is tire tunnels, but the tires must be of the appropriate size. Tunnels can be ground or mounted (on chains) for older children (at the same time, tires must be fixed both from below and from above so that the wheel does not suddenly “leave” to the side when the child is inside) or on a beam (at the same time, so that someone - something did not fall out, tires should occupy all the space between the vertical posts). Using wood between large tires or concrete pipes. Inclined (tires are fastened together with chains so that the first do not gather at the bottom) and vertical.

Mulch out wood chips here is a very unfortunate choice, the sand, of course, is much better

In fact, this is a fun arithmetic, but with the right tire size, this is a great tunnel for kids.

And here, in an excellent creative sports device for training the arms of the tire, there is a springy buffer platform for landing and pushing off with your feet.

Continuation - ideas for balance training complexes, large game objects and much more - see the second part of the article.

Source among others:
www.playgroundideas.org

How nice it is when you live in a friendly apartment building when active neighbors are ready to go out with you on a clean-up day on the eve of the holiday, when together with enthusiasts you create crafts from tires for the playground, and all this for the sake of your beloved sons and daughters. Today, almost every family has a car, which means that the whole yard will be able to collect more than a dozen old tires and create an original, cozy and useful playground for kids to play and have safe entertainment. A sports ground, a spacious sandbox, a fabulous island - all this can really be assembled from old rubber, to captivate your kids into the yard, distracting them from intrusive smartphones, computers, tablets. And what crafts from old tires have already been created by caring and active parents?

Crafts from tires for the playground

A series of crafts "Oh, I'll ride ..."

From tires in the yards have already been created different types children's cars - old Zhiguli, trucks, ambulances, motorcycles. Tires are used to make them. different diameter, and the corpus is formed vehicle. If possible, you can also come up with seats in a children's car that will play the role of benches in the yard. Well, if you can add a real steering wheel to the composition, simple levers from the control system, so that there is something to turn, twist, switch. It will be difficult to take a child away from such an interesting rubber installation! All tires are thoroughly fixed, fixed with reliable fasteners, or soundly sprinkled with earth, and then the segments of the rubber product are painted. And you need to take only bright, filled with joy and sun, colors! It is recommended to make a simple installation, without sharp corners and high sides, so that young "drivers" and "passengers" can easily climb into it, play, climb and not get injured. All the tires used on the playground are already, most likely, "bald", but they still need to remove all the notches, spikes, grind the surface so that the child does not catch or scratch. Some parents go further and create not just a copy of the car, but create a real attraction in which everything spins, honks and even teaches. Very often, the body of a rubber miracle machine is covered with educational drawings, letters and numbers, or stories from fairy tales.

Crafts from old tires of the "Wonderful-wonderful forest" series

Rubber is a complex material, it is difficult for a master, so crafts from old tires for a playground are made primitive, that is, they choose simple shapes, clear silhouettes. And now long caterpillars, centipedes, snakes appear on the site. They are very easy to make a large number tires that fit on cement base and then dyed. Such long fabulous inhabitants of the forest will not only decorate the space for kids to relax, but also create an “obstacle course”. On the back of a dragon, a boa constrictor can perfectly climb, jump.

Often crafts from tires for the playground are made in the form of turtles, cats, giraffes. They look colorful, serve for a long time, performing a largely aesthetic function. Sandboxes can be made in the form of a sun, if we take as a basis the tire of a truck, a large tea mug, if we give the installation exactly the shape of the dish and paint it in the appropriate color.

Time consuming, but you can still make giant flowers from old rubber. It will be necessary to cut tires, give the desired shape, making almost jewelry and hard work. On the eve of the birthday of a son or daughter, some parents make surprises, secretly, in the garage, making a giant fairy-tale character from tires, and then mount the craft on personal plot presenting a gift to a son or daughter. As they say, hard to find the best place for a selfie on a holiday!

Crafts from tires of the series "Sport, sport, sport ..."

In the yard apartment building the childhood of an almost violent active football, basketball, volleyball team passes, which is eager to squeeze all the juice out of itself on sports competitions? Then it is necessary to introduce the children to sports, otherwise they will score leisure with idle vacillation or computer games. Hyperactive boys and girls will certainly appreciate the playground that their parents made using old tires. What compositional elements can include playground created by caring parents?

Crafts from tires of the Vodichka series

You have a huge truck tire at your disposal, then you can get crafts from tires for a playground that perform the functions of a pool, bath and pond. To do this, initially prepare a place for fixing the tire, dig grooves, compact the ground and sprinkle the edges of the tire. Fix strong polyethylene inside the tire so that it retains water normally. If a pond is created, then decorative elements are thought out in the form of water lilies, egg capsules on the water surface of a small artificial reservoir. In the pool of old tire it will not be possible to fully swim, but the baby will be able to wander there, splash with water on one of the hot days in the garden.

Complex crafts from tire tires are made according to the instructions, and if the technology is not violated, you can get a wonderful result at the end.

A lot has already been created creative products from old rubber, but how much more can be done if you are not too lazy to make crafts from tires for the playground for your sons and daughters. They will become useful invention, proof of your love and care. The main thing is not to stop there and each time complicate the design of the rubber product.

Used car tires are becoming a headache for environmentalists and advocates environment. More than 70% of rubber tires in the world are not recycled and are collected in landfills. Meanwhile, the versatility and freeness of this material allows you to use old tires for new purposes. Masters with developed imagination they create with their own hands both individual sculptures from tires on the playground, and entire towns.

Construction and arrangement of the playground car tires

You rarely meet a motorist in whose garage there would not be a few tires that simply could not be thrown away. Do not rush to do this. Crafts from them are so simple and multifunctional that they will find a place both on the site, and in the design of the yard, and on suburban area and even as furniture.

A playground for children equipped with tires is a fairly common phenomenon. This material is almost universal for decorating sites with your own hands, sometimes there are real masterpieces. What are the most popular crafts among kids? First of all, this. Making your favorite play spot out of one or more tires is easy.

Tires are exactly the material that does not require a large number of accessories, additions, tools and additional parts for strengthening.

Single tire sandbox

All you need for this craft is big tire, sharp knife, piece of old garden hose, shovel, paints, if possible, in several bright shades.

• It is better to choose a place for a future sandbox made of tires in the shade: the rubber gets very hot in the sun, the kids can get burned, and it’s more useful to play in the shade in the heat;
• To begin with, you need to dig a recess with a shovel, a little more than a tire;
• Cut off the inner ball with a knife and finish it cut rubber hose. This finish is needed to protect children from cuts;
• Fill the tire with sand;
• Paint in bright colors;
• After the paint dries, the do-it-yourself sandbox will become a favorite place for children to play.

Sandbox Flower

Creating such a sandbox will take a little more time, but it will work bigger size, several guys can play it at the same time.

DIY kit: 3-4 small tires, knife, construction stapler, shovel, paints, hose.

• Tires are cut in half lengthwise and finished with a hose;
• All elements are laid in the form of a flower in a shallow figured trench prepared in advance. Alternatively, in the place of one petal, you can install a round seat or stump, this will be a table or chair for parents;
• At the junction, the parts of the tires are fastened together with a stapler;
• It remains to paint such a seven-color flower and fill it with sand.

Sandbox with waves

This version of the sandbox can be of any size, for a whole group of children. You need several tires for manufacturing, depending on the diameter.

Read also

Homemade crafts for summer cottages, gardens and gardens

Swing

What playground is complete without swings. Sites equipped with various crafts from tires will not be an exception, especially since there are many options.

The most important thing in mounting a swing with your own hands is to make reliable fasteners.

The place of suspension and ropes should be as strong as possible. As for varieties, the choice is yours.

The simplest

For older guys: the tire is suspended vertically on a rope or horizontally on two ropes. This option is made more attractive by cutting out all kinds of designs and figures from the tire. The main thing in this lesson is to leave as reliable as possible support areas tires.

Cradle

This swing is for small child. The creation process is as follows:

• Small tire needs to be trimmed sharp knife up to half so that the rims remain intact;
• Prepare the attachment points, fasten the brackets and pass the rope through them;
• Tie the ends of the rope on the rims on both sides.

Cradle - swing for the baby is ready.

rocking chair

Easy to do with your own hands and no less interesting for kids - crafts in the form of rocking swings. Items needed: a tire, a board, and something that can be used to make handles, for example, a simple thick rope will do.

• The tire is cut in half (you can get two swings);
• A board is attached to the cut part;
• Holes are made in the board, a rope is fixed as handles. Handles can be carved from wood;
• This is the simplest version of the rocking chair. If you connect your imagination and make a little more effort, the board-seat can be decorated with a variety of figures of animals, figuredly cut out the tire itself, color it brighter.

Recycling car tires is becoming an integral part of our lives. This is one of the unresolved problems facing humanity. And we also try to solve this problem in our own way.
Some of the tires make flowerpots, giving them a second life, someone ottomans, craftsmen manage to make even beautiful flowers. I'm not talking about sports equipment. But I really liked the idea of ​​​​creating cars from tires. They look stunning even for adults, but for kids it's just fantastic.
TIRE RACE CAR
Five old tires, steering wheel, baby plastic chair, a little work and joy for kids will not be the limit.


Eh, stuck...
HELICOPTER FROM TIRES


Isn't this a miracle of technology? Whether it's a helicopter, or a dragonfly on wheels, but you want to take it up into the sky even more than drive along the road.
ATV FROM TIRES


Well, an ATV is the dream of all the cool boys who dream of racing across the expanses of our planet. Maybe we will help our kids to fulfill their dream and try to make something similar to these wonderful miracle cars from tires.
TRUCK FROM TIRES


And this car is for boys and girls of the whole yard, because such a car can be driven by a large company.
MOTORCYCLE FROM TIRES


Another amazing, and for urban kids, almost unrealizable dream is to ride or sit, although not real, but on such a beautiful motorcycle.
DONKEY WITH A CART OF TIRES


You looked at several options for making cars for children, but if you also need exotic, make a donkey with a cart for comparison, because this is also a vehicle.
Dear parents, let's help our kids make their dream come true and try to make something similar to these wonderful tire car miracles for them.