DIY rocking chair step-by-step assembly drawings. Do-it-yourself rocking chair - we are preparing a corner for relaxation. Step-by-step instructions and manufacturing options. Necessary materials and tools

Many of us are familiar with such an interior item as a rocking chair, which can be found in many country houses. For most, it is one of the favorite vacation spots, but not everyone knows that everyone can make such a chair. However, first you need to acquire certain knowledge, skills and prepare a tool.

AT last years rocking chair has become a fairly common piece of furniture. In the assortment of many furniture enterprises you can find a large number of models of rocking chairs designed for use in apartments and offices. Moreover, there are among them models made in classic version weaving method, and modern products that fully meet the requirements of high-tech style.

Benefits of a wooden chair

Before you start manufacturing, you need to decide what material to use for it as a basis. Although there are many options, the wooden chair is the most common. Therefore, further list the advantages that this material has:

  • environmental Safety. Wooden furniture has been very popular among consumers for many years, which provided it with such qualities as natural origin, safety and hypoallergenicity. Therefore, the owners wooden chairs do not face any inconvenience in the process of using it, because they are confident in the environmental friendliness of this material;
  • strength and long service life. Wood is enough durable material, which was transferred to the furniture made from it. In addition, it perfectly tolerates mechanical stress and demonstrates a long service life;
  • attractive appearance and variety of forms.

Rattan rocking chair

We repeat that rocking chairs today offered in in large numbers most various options. One of these products is a rattan rocking chair, which not only has a pleasant design, but is also able to harmonize perfectly with other elements of the cottage interior. The birthplace of rattan is South America, and this plant itself is often referred to as a flexible liana.

Of the features of this material, it should be noted high strength, in which it is capable compete with wicker.

The technology of manufacturing armchairs from this culture is characterized by the fact that instead of traditional joints based on screws and bolts, glue and skillful knitting are used. Alas, it is impossible to buy this tree in our country, so most owners country cottages it is impossible to make such a chair with your own hands.

Wicker rocking chair

A photo of the options available today for this piece of furniture allows us to judge that a wicker rocking chair is quite in demand today. It can be found in cottages and even in apartments in many regions of our country. Willow vine is used as a material for it, and the finished chair itself fits well into the interior. garden house, cottages and even garden greenery. consumer rocking chair willow vine attracts primarily because of its low weight and high strength. However, such furniture has one serious drawback: excessive moisture negatively affects the material, so it is not recommended to keep such chairs outdoors in wet weather.

Materials for manufacturing

Regardless of what type of wood you decide to use to make a wicker chair, you must have certain skills. The tree is affordable and easy to process, so many owners who are thinking about making a rocking chair with their own hands most often consider using wood as the basis for it. But first it is necessary prepare certain tools for making furniture:

  • electric jigsaw with a set of knife blades;
  • disc grinder with a set of coarse and fine-grained nozzles;
  • screwdriver with drills;
  • tape measure and corner with a ruler;
  • hammer and spatula;
  • brush and pencil.

Execution of the drawing

Even before you start work, you should consider that in order to make a quality rocking chair with your own hands, a drawing is required.

Having a sketch in hand, you can avoid serious errors in terms of product dimensions and correctly determine the quantity of materials that you will need to make.

First you need to take metal mesh, each cell of which corresponds to 1 cm, and outline on it a template for the side of the chair. To further make it more convenient to work, it is recommended to transfer the created chair template to plain paper. So it will be easier for you to mark the outline of the chair already on the plywood itself. Do not worry if small errors are made. Here it is important to maintain the symmetry of the sidewalls and avoid protruding corner elements on the outer rolling part.

To do this work, we need plywood 3 cm thick, from which three drawers are cut dimensions 120 x 800 mm. Sidewalls are made using electric jigsaw exactly on the pattern. After that, you need to take a beam 50 mm wide and 25 mm thick and cut out 35 fragments from it, each of which should be 120 cm long. The finished bars will later serve as a seat and back for us.

Try to get as much timber at the very beginning to minimize waste. This will be quite easy to do, given that you can calculate the total length of the timber even before buying. Let's say if it will have a length of 2.3 m, then better chair make narrower. As a result, its width will decrease to 115 cm, however, this will allow you to avoid waste. The given dimensions of the rocking chair do not require their exact observance. Therefore, if in the course of work it becomes clear to you that it would be better to increase or decrease the size to minimize waste, you can do it without fear.

Workpiece processing

Surface treatment of workpieces is carried out using grinder. During the operation, it is necessary to pay special attention to their ends. If, during work, wood fibers protrude on them, then you need to use a hammer and level them, and then process them with hot drying oil. So you will make the ends of your furniture more resistant to moisture, which will positively affect its service life. When the drying oil dries, it is necessary to re-process to consolidate the result.

The assembly of the chair is carried out, focusing on the drawing of the rocking chair. Need fasten the two sides, used kings. But first you need to mark the places where they will connect.

According to common schemes for the manufacture of rocking chairs, it is recommended to fix them in the head area, in the middle and at the legs. When you have to fasten the tie bars to the sidewall, use a confirmation for this. This name is given to a special screw screed, with which they are fixed wood materials. First, before fastening, it is necessary to create holes in the sidewall 8 mm and in the end of the drawer side 5 mm.

Next, we begin work on creating the seat and attaching it to the base. We take earlier cooked 35 pieces of timber, in which you need to make four holes for two on each side. After that, the bars must be fixed to the sidewalls. Given the number of holes present, it is recommended to fix the bars with 3 or 4 mm self-tapping screws. During the fastening of the boards, constantly check the horizontal position of their installation.

Finished product processing

If we turn to the experience of making rocking chairs made of wood and plywood by ordinary owners, we can identify a number of serious mistakes admitted after assembly. Among them, I would especially like to dwell on low-quality finishing or its absence. In order to do everything right and ensure the chair has the longest possible service life, it is necessary do the following:

  • process the hole above the screws with putty;
  • cover with a layer of antiseptic;
  • apply waterproof varnish in two or three layers.

If you perform all the above work exactly, you can be sure that a rocking chair made by yourself will be able to please you for more than one year.

If you are going to start making a rocking chair with your own hands for the first time, then it will be useful for you read the recommendations experienced craftsmen who have done this work more than once:

Other types

One of the varieties of this piece of furniture is wooden baby chair. It is done according to the same scheme as described above, however, you need to adjust the size for the age of the child. This also applies to the tilt of the backrest and handles. Quite often, child seats are made in the form of a horse.

Of particular interest is the rocking chair for the office. The peculiarity of its manufacture lies in the fact that leather is used for facing, as a result of which the product acquires a respectable and solid appearance. With such a chair at hand, a person will have the opportunity to relax and unwind during the working day.

Conclusion

Although furniture manufacturing offers enough big choice furniture, one of the most desirable for many owners of summer cottages is a rocking chair. Settled in it you can relax and allow yourself to forget about everyday affairs for a while.

Moreover, in order to personal experience to feel all the benefits of having such a piece of furniture, it is not necessary to spend big money on buying a rocking chair. You can always make it yourself. Given that you can use available materials and tools, any person who at least once held a hammer and saw in his hands can cope with this task. There are many ready-made schemes for the manufacture of such furniture, therefore, if you strictly follow the technology of manufacturing a rocking chair, you can create a fairly elegant and reliable product that can serve you for many years.


On weekends after a working and labor week, sometimes you want to relax and unwind, read good book or a magazine. Sitting monotonously on a sofa or armchair is an activity that quickly gets boring, but if you sit in a rocking chair, and even by a fireplace or stove, then a pleasant process will stretch for a long time.

AT furniture stores this piece of furniture is sometimes worth a lot of money for common man, but using natural ingenuity and hands growing from the right place, you can make a chair yourself. How to do it? See below. And so let's look at what the author needs to create a chair.

materials
1. board (maple)
2. rattan
3. stain
4. stain
5. screws

Tools
1. jigsaw
2. sandpaper
3. grinder
4. brush
5. drill
6. screwdriver
7. pattern

The process of making a rocking chair with your own hands.
A rocking chair is a great place to relax and think, as well as reading and remembering literature. This chair came to us from Europe, at first only noble and rich people naturally had such furniture, over time it became accessible to the common man.


For the manufacture of the chair requires a strong and hard rock wood, for example, the author took maple, a very good and durable tree with a noble texture. First, you should make sketches and drawings for the future chair, as well as make a pattern along the contour of which blanks will be cut.


Further, the author cuts maple boards according to the pattern.


These beautiful armrests are obtained, then the author carefully polishes them so that they become very smooth and even.


Then all the blanks are assembled into a single structure.


The seat is attached.


And here's what happens in the end.


Next, the author drills holes around the perimeter of the seat and back, they are needed in order to later make a close-fitting rattan. Rattan is very plastic and at the same time strong material, many people know that beautiful wicker furniture is made from it.


This is how the holes were drilled. Then the author begins to stretch the rattan fibers, first along.


Then the fibers are intertwined across, this kind of woven mesh is created.


By the same principle, the author begins to trim the back of the chair.


Then weave it crosswise again.


Back view of the chair.


This is what happens in the end, just look how beautiful it is.


The author also made a small armchair for his child.


Now the master has his own chair in which he can sit in the evening by the fireplace or TV.

This concludes my story. Thank you for your attention! Come visit more often, do not miss the news in the world

On the Internet and in various stores, there are many models of various chairs of this type - their color, material and style are different and successfully combined in such a way that everyone can choose for themselves a successful model that will satisfy him in all respects.

It is not difficult to create a rocking chair made of wood with your own hands. It takes effort and skill to homemade rocking chair delighted your whole family in a corner intended for relaxation.

The list of necessary materials and tools for a rocking chair cannot be limited due to the fact that the choice of frame, substrate options and some other little things are different. But there is a mandatory list of necessary tools:

  • a hammer;
  • screws and screwdriver;
  • pencil for marking and brushes for painting;
  • jigsaw and files (in case of using a wooden frame);
  • level (it would be a good option right angle with a long ruler and a built-in level - these can be found in specialized stores).
How and what stones to use in landscape design, read in .

Step by step instructions for creating

Option one - a standard wooden rocking chair

The wooden frame is the most common in the creation of such projects - it is reliable, practical and easy to process.

When creating a rocking chair with your own hands, the drawings are important element for further development of the project.

Rocking chair made of wood is durable, environmentally friendly and attractive

In the case of using wood as the main material, you can find many options for templates and drawings with detailed explanations and calculations.

To create such a chair, you need to use a jigsaw and a grinder to cut out the details for the chair.

In the future, you can simply lay a blanket on the chair, or attach sewn pillows - this will add originality and uniqueness to your rocking chair.

The second option is the atmosphere of nature

Using a tree as a frame, you can also use small branches as "upholstery". They can be collected in the forest in April or October.

After completing all the details of the tree and fastening them together, you need to carefully place all the collected branches in the empty space.

You can connect and strengthen such a system with glue or liquid nails.

It is important to remember that it is necessary to fill all the space allotted for the branches - if there are large gaps in the structure, it may break.

The third option is an eternal classic

The running material in the creation of rocking chairs is plywood.

Cut out two boomerang-shaped sides from a sheet of plywood

It is necessary to cut a number of narrow long strips of plywood and nail them to the two base parts on which the chair will roll.

Regarding the distance between the "stripes", it is customary to use the rule of the golden mean - the elements should not be close to each other, but a large gap between each element is undesirable.

Do not spare the screws or other material with which you nail the plywood to the base - on each side it must be nailed in two places, for a total of four attachment points.

The shape of the plywood swing chair can vary, the decor depends on your imagination.

How to properly plant and care for Smaragd thuja, read.

The fourth option is a part of the soul

Asking the question of how to make a rocking chair with your own hands, a person wants to make a unique, unique project.

You can make the parts on which the chair will swing from wood, the support system from metal frame. The seat itself is made of wool - knitted.

The scheme and technique of embroidery can be different, the main thing is to accurately measure the space for embroidery, leave loops for attaching to the frame.

Such an armchair will look organic both at home and on the street - you will really put your soul into it.

These are just a few of the many chair models that exist. I would like to note that under the seat there may be, for example, a place for your animal. Complement the rocking chair made with my own hands, you can use any elements - it all depends on the imagination and priorities of the person.

O beneficial effect rest in a rocking chair written a lot. It also helps to concentrate during intellectual work. Finally, it's just convenient, pumping out, to take books from the rack behind your back or a cup of coffee with coffee table. The prices of ready-made rocking chairs, as it should be in a consumer society, react to such advantages in their own adequate way: a rocking chair for 5,000 rubles. it's still cheap. And the people are artisans and also respond adequately in their own way: those who want to make a rocking chair with their own hands arrive. However, the rocking chair differs from other pieces of furniture, firstly, in that the whole thing moves and sways. Secondly, so that it does not turn from a rocking chair into a kicker or a tipper, the entire product with the person seated in it must have an exact balance, which must be maintained within acceptable limits for riders of different weights and builds. This publication is devoted to the consideration of questions on how to achieve the required qualities of a rocking chair.

Types of rocking chairs

It is necessary to be consistent with your own requests already at the stage of choosing a prototype. There are several types of rocking chairs, oriented to users with different habits and needs. The main types of rocking chairs are shown in the photo. Rocking chairs on simple radius skids (arcs, rocker arms, skis) were the first to appear in everyday life. They are in use to this day, both in modern and classical form, pos. 1 and 2. Their main advantage is constructive and technological simplicity.

Smoothness and softness of swinging are provided by radius skids only on relatively small swinging, and in case of strong swinging they do not guarantee against tipping over. Therefore, rocking chairs “on the radii” are made with a low landing, which ensures a large excess of the center of the generatrix of the circle (CO) over the common center of gravity (CG); see below for more details on the kinematics of rocking chairs. If a seat of normal height is required, then the skids are equipped with chippers, pos. 3. The shocks of the fenders on the floor are noticeably given off at the “fifth point”, and in any case, you have to get out of the rocking chair on the radius skids, somewhat strained.

Note: stability during swinging with a slightly larger amplitude at a normal landing height is provided by rocking chairs on radial skids with a closing horizontal arc, see fig. on right. But, suddenly the limit is reached, the supporting surface is instantly reduced to a point and a sharp push in the back follows.

Overturning is excluded in rocking chairs on skids of variable curvature, pos. 4. All of them are quite comfortable for riders of different builds. They themselves gently land the seated and leaning forward rider of a rocking chair of the nirvana type on runners of variable curvature, pos. 5 and 6. It is also possible, by changing the progression indicator in the law of changing the generatrix of the radius (also see about kinematics), to design them for any, within acceptable limits, landing height.

Note: mothers with a baby give good rest with the complete unity of the souls of the rocking cradle. Reliable rocking chairs with a cradle are made only on skids of variable curvature, see fig. on right. Otherwise, suddenly the little one will get worried and the mother will start up, and you can somersault together. Which is just dangerous for a baby.

Nirvana rocking chairs on elliptical skids, pos. 7, provide a truly blissful slight rocking, but do not prevent tipping over during strong swinging, therefore they are equipped with chippers; the front is often combined with a footrest. Garden rocking chairs with an awning on ellipses never tip over, pos. eight.

Nirvana rocking chairs on springs, see fig. on the left, swing as gently as on ellipses, because mechanical characteristic progressive spring. But it is difficult to make a spring chair with your own hands: either high-quality boards of special types of wood (teak, boxwood, dogwood) or rubberized so as not to scratch the floor, a strip of spring steel are required. In addition, dirt accumulates in the gap between the spring and the skid and it can be very painful to pinch your finger in it. For the last reasons, now spring chairs are very rare for sale.

Rocking chair 3 in 1

Finally, there are also multifunctional rocking chairs "3 in 1" on skids with smooth kinks, see fig. on right. With a direct landing, this is a regular chair; leaning back, it can be switched to the rocking chair mode at radii, and leaning back even more, it can be turned into a sunbed. But the dimensions of the 3 in 1 rocking chair are too big for apartments below the business class, and the transitions from mode to mode are accompanied by quite sensitive shocks. In unsuccessful models, for this you have to either get up at all, or twitch, wriggle and fidget like a puppet on strings. Therefore, rocking chairs 3 in 1 are a piece of furniture for an amateur.

To start

Without any special claims, just to relax after work, a rocking chair on radius skids will help. Blueprints simple pattern, made, with the exception of skids, only from straight-line parts, are given in fig. To the cottage, veranda or garden, this chair can be made in half a day, using only a jigsaw, a drill and a couple wrenches(assembly - on bolts). And having rocked to your heart’s content, it’s possible to already think about a home rocking chair for the more sophisticated; then you need a tool and knowledge more thoroughly.

How does it swing?

Most home craftsmen make rocking chairs according to ready-made drawings, but prototypes often turn out to be designed and tailored to a specific person and an exact replica is not so convenient. Therefore, before making a rocking chair, it is necessary to obtain at least initial information about its kinematics.

The CG of an upright person of normal build is located on the border of the lower back and sacrum with inside spinal column. In a seated individual, it is somewhat mixed forward and even less down. In the seat-rider system, the overall CG is shifted back almost to the starting position and a little further down. The downward displacement of the general CG for the design of a rocking chair is not particularly significant, and it can be assumed that the projection of the general CG on the supporting surface (floor) is approximately the same as that of a standing person. In the future, the resulting error can be easily compensated by the final balancing of the chair, see below.

The location of the central heating element vertically relative to the central heating unit has a much stronger effect on the stability and comfort of the rocking chair; the latter is the determining value in the design of rocking chairs on skids with variable curvature. If the CG and CG coincide, this is an indifferent equilibrium: for any physically possible inclination of the chair, the projection of the CG on the floor falls on the point of contact of the skids O, pos. 1 and 1a in Figs. The chair does not rock, and if you lean back too much - an instant somersault with the risk of breaking your neck. Fortunately, the exact coincidence of DH and DH is possible only theoretically.

If the CG is higher than the CG, then its projection “runs away” outward, backward or forward, from the point of contact with any inclination. At the slightest inclination, the overturning moment Mo occurs (pos. 2 and 2a), the rocker turns out to be unstable. To avoid such a situation for a family rocking chair, it is calculated and balanced for the tallest, heaviest and pot-bellied rider possible so that its CO is 450 mm or more higher than the CO. Then, when the chair is tilted, t. O will “run away” from the CG projection, the restoring moment Mv will constantly act (pos. 3 and 3a) and the chair will not tip over when swinging within acceptable limits. For those who are smaller, the excess of the CO over the CO will turn out to be too big, and the rocking will be harsh, but this can be easily compensated with pillows under the back and buttocks. In general, the lower the elevation of the CO above the CO, the softer and smoother the rocking, but the probability of tipping over, sharply straightening up and sitting up in the chair, is higher. Therefore, it is better for novice carpenters to ask for an excess of CO in the range of 600-700 mm.

Note: if it is impossible to determine the position of the CG of the largest of the riders (say, in its absence), the radius of the generatrix of the circle R is taken equal to the average height of users minus 5 cm. Suddenly, the rocking will come out harsh, this can be corrected by placing a permanent pillow on the seat.

There is no need to drag your own pillows with you into a chair on runners of variable curvature: it will itself rise to the position of greatest comfort. At the same time, the healthy man will lean back more, and the slender one will be sitting straighter. When swinging back, t. O will run away from the CG projection the farther, the greater the angle of inclination, and it simply will not work to swing before tipping over. And if you “pump” forward, which is generally difficult, the chair will smoothly land the hyperactive person on the floor: where do you want to rest? Get up, do something.

To construct a profile of skids of variable curvature, the radius of the generatrix of the circle (it is determined as in the previous case) will, firstly, have to be rotated several times by a fixed angle α; usually take α = 10 degrees. Secondly, to build the rear branch of the snake, R is increased at each turn according to the law of geometric progression with the index k=1.02-1.03. That is, it will be (see pos. 4 of the figure) R1 = kR; R2 = kR1; R3 = kR2; R4 = kR3 etc. if required. In fact, R changes according to a certain trigonometric function, but for furniture accuracy and the size of a rocking chair, it is more convenient to replace it with a progression, it is easier to count this way.

The construction of the anterior branch is carried out at a constant R, but with each turn of the generatrix of the circle, the CO is raised vertically (ibid., at pos. 4 of the figure). The initial elevation Δh1 is taken equal to 2-3% R, i.e. (0.02-0.03)R, and the subsequent ones also follow a geometric progression with the same indicator as for the back branch. Δh1 in this case, the value is quite critical; its smaller value should be taken for thin ones, and the larger one for thick ones.

In conclusion, the obtained points are connected using a smooth curve pattern. Do not be embarrassed if the tangents to it turn out to be not perpendicular to the radii: in order for the chair to be stable, it must be on the opposite slope at every moment of rocking. When building, it is desirable to take a scale no smaller than 1:5.

Note: if a nirvana chair is being designed, but the front ascending branch of its runners will be an ellipse arc (green dotted line in pos. 4), tangent to the constructed runner profile in point I in the same place.

Final balancing

It is unlikely that a novice master will have a rocking chair immediately comfortable enough. Most likely, the product will need to be balanced. If the chair does not sway well, and shoves when leaving it, you need to weight the rear overhang. The easiest way to do this is to connect the ends of the rear branches of the skids with a low U-shaped beam of boards, with a notch facing down. Loads are placed in the recess. The arm of the lever in this case is long, so the weights do not have to be suspended. Another option, depending on the design, is a transverse tube-beam with a load inside. But in the process of balancing it will have to be removed and put back several times. If the rocking chair strives to fall back, you need to weight the front overhang. The easiest way to do this is by placing a footboard and attaching weights to its underside.

About materials

Rocking chairs are made mainly of wood. Metal, for all its manufacturability, low waste and greater durability outdoors, too heavy. The influence of the chair on the overall CG is significant, the moment of inertia of the system is large and, as a result, the swaying is too sharp. Or you have to set an extremely small initial elevation of the DH above the DH, risking that the rocking chair will tip over under someone. However, we will return to metal rocking chairs in the course of considering individual samples.

Plywood is a completely different matter, especially for beginner carpenters. Firstly, when making rocking parts with 3-layer glued parts, it is possible only with the help of an electric jigsaw to make accurate and strong connections tenon-groove, on the left in the figure, if you follow the following. regulations:

  • Plywood of the middle layer is taken twice as thick as for the extreme ones. For example, if you need a total thickness of 20 mm, then glue 5-10-5 mm.
  • Assemble parts from blanks on a 2-component waterproof adhesive. If on PVA - be sure to reinforce with small nails.
  • The joints are assembled with gluing (wedging in this case is unacceptable) and reinforced with diagonal pairs of self-tapping screws from 2 sides.
  • The supporting surfaces are protected by overlays made of thin (6-10 mm) slats of hard durable wood or dense sheet rubber 4-5 mm thick. Plywood under concentrated load splits very well from the end.

Secondly, plywood makes it possible to apply non-standard technical solutions, for example. as on the right in Fig. Such a plywood rocking bowl can be made using, again, only a jigsaw. Comfort is high, stability is absolute, and can serve as a hanging hammock or swing chair. The thickness of the lamella boards is from 12 mm; connecting half washers on the poles - from 24 mm.

Note: in any case, the finished plywood rocking chair must be impregnated twice with a water-polymer emulsion or liquid acrylic varnish on the water based. This will not only increase the strength of the product and its resistance to external influences, but also relieve excess residual stresses in joints and bent parts.

How to put overlays

wear-resistant wooden lining a trace is installed on the skids of the rocking chair. way:

  1. We turn the chair upside down;
  2. Thoroughly warm the bar-blank with a building hair dryer;
  3. We lay the workpiece on the skid and tightly wrap it along the entire length with cotton tape. Don't burn yourself, the wood is very hot!
  4. We also grab the second blank on another runner;
  5. After the strips have completely cooled down, we remove the bandages from the braid and glue the PVA overlays on wood or with 2-component glue;
  6. We attach the ends of the slats with small nails until the overlays fit snugly along the entire length. We put washers or pieces of plywood under the nail heads;
  7. After the glue has completely dried (2-3 days), we remove the temporary fasteners. We drill blind holes for self-tapping screws and fasten the ends completely;
  8. We rub holes with fastener heads with putty from sawdust of the same tree, densely mixed with PVA.

Note: metal hardware linings need to be fixed only at the ends. Otherwise, when the lining is abraded during use, the fastener heads will stick out and begin to scratch the floor.

Examples of rocking chairs

metal

Let's start the review of rocking chairs with metal ones, because. making rocking chairs out of it is justified in a few cases. Forged rocking chairs imitating classic wicker or rattan wicker, both requiring special equipment, a forge, etc. qualifications, do not touch. But metal rocking chair"braided" can be made by welding from profile pipe; preferably - elliptical section. In this case, you need to choose kinematic diagram nirvana rocking chairs as the least sensitive to the excessive elevation of the central heating above the central heating, it also corresponds well in design to wicker rocking chairs, see fig. The seat, in order not to increase the moment of inertia, is made of braided cables, belts, etc.

It also makes sense to make garden rocking chairs out of metal, see below, due to its strength and wear resistance. But a welded frame like the one in pos. 1 fig. on the right - the solution is not optimal, too complicated, labor- and material-intensive. It is much easier to make a steel frame of a garden rocking chair of the Concept type, pos. 2. Pipe - round from 40x2. Actually the bed can be sewn like a hammock; balancing - by changing its tension and, accordingly, sagging. As a result, labor and costs are much less than for repeating the established forms of rocking chairs coming “from the tree”, and comfort is no worse.

Another interesting option is visible here: the frame of a rocking chair A concept from ... gymnastic hoops. Only not aluminum or propylene, but carbon fiber (carbon). Strength - monstrous, durability - absolute, weight - miserable. What, however, can not be said about the cost.

Vanka-vstanka

Recently, garden rocking chairs have become popular. If you lean back completely in this and tuck your legs in, it collapses back at almost 90 degrees without losing stability; the rider will be lying on his back with his knees at the zenith. And if you stretch your legs forward, the rocking chair - roly-poly-stand-up becomes in the usual position and then you can sway as always.

The roly-poly toy with a spherical bottom sways quite sharply. Comfortable swinging of the roly-poly rocking chair is achieved by profiling its runners according to a complex law. It will not work to build their sidewalls “in a school way”, as described above. It is necessary to be guided by proven samples and draw markup on a grid, see fig. The variant on the inset, with a sheathing of planks 30-40 mm thick, is more expensive, but less laborious. It also allows you to increase the length of the rocking chair by placing intermediate skids.

Note: wooden balls are mounted on the protruding ends of the longer rods (1050 mm) and form handles for swinging and carrying.

rocking bench

To wallow with your heels in the sky, throwing your hands behind your head and admiring through the trembling foliage the clouds floating in the blue heights is a heavenly pleasure, but not for everyone. It is desirable for someone to look more impressive while relaxing. So more suitable garden bench - rocking chair, see fig. It is a bit difficult to swing on it, its own moment of inertia is large, but it also swings for a long time. The maximum span between supports with skids is 750 mm with 40 mm thick lathing. The back paneling is decorative.

Sunbed with awning

Both those and other requests will be satisfied by a garden rocking chair on elliptical runners and with an awning. The dimensions of its sidewalls are given in fig. their material is 24 mm plywood. The bed width is up to 900 mm, its sheathing is made of slats 50x50. The places of the sidewalls, indicated by gray circles, are connected by round wooden crossbars with a diameter of 60 mm or more.

rocking chair

Here we are not talking about rocking horses, they are toys, not furniture. But it’s also not harmful for children to relax, swaying, so it makes sense to make a rocking chair for a child. Its proportions will be slightly different than for adults, due to the influence of the square-cube law.

Device baby rocking chair, the scheme of its assembly and the specification of details are given in fig; material is wood. Somewhat experienced home master building a rocking chair for a child, guided by these data, will not be difficult, and beginners can first watch a master class on making almost the same children's rocking chair.

Furniture made with your own hands is not only pleasing to the eye, but gives quite tangible pleasure. This is especially true, on which it is so pleasant to relax after a hard labor day or spend an evening at country house by the fireplace. In addition, by making furniture with your own hands, you save on purchases and give the product a unique originality. And our article will help you navigate the whole variety of models made from the most different materials, and will give practical advice for working with them.

It is always necessary to start making a rocking chair with the choice of model and material. After all, furniture must be reliable, durable and for a long time make your family happy. Let's talk more about the most popular products.

From plywood

Plywood is one of the most common materials used in the manufacture of furniture. It is easy to bend, easy to saw and simple to process. Designers often work with plywood, so finding sketches of furniture models on the Internet is not at all a problem. By the way, the strength of the rocking chair will be at the level, because plywood is twice as strong as wood, and its cost is low.

Before you start doing something from the prepared material, we advise you to process it protective equipment. This measure allows you to use the rocking chair not only in the house, but also take it outside if you decide to send the product to the country.

So let's get started. Let's go to hardware store and buy:

  • three sheets of plywood measuring 1520x800 millimeters. All sheets different thickness: four, ten and fifteen mm;
  • a set of screws or self-tapping screws;
  • wood glue;
  • jigsaw.

Steps for making a rocking chair with your own hands:

  1. after acquiring the necessary materials, we take a drawing and make a blank of patterns. To do this, we transfer the drawing to thick cardboard and cut out the outlines of the details of the chair;
  2. with a pencil we make markings on a sheet of plywood using our patterns;
  3. We cut parts out of plywood with an electric jigsaw. From the thickest sheet, cut out two side elements, two racks, two seat supports and two planks measuring 470x45 mm. We will also have to make a 540x45 mm cross member and a 485x45 mm bar. A ten-millimeter sheet will go to cut eighteen planks 540x30 mm for the back and sixteen crossbars 500x30 mm for the seat. From the thinnest sheet we cut out square bases for the back and seat;
  4. be sure to clean all the details with sandpaper;
  5. glue the cut out cross members on the thin bases of the seat and back;
  6. we cover all the details with stain and varnish, if desired, you can special paint- it's up to your taste. Let the parts dry completely;
  7. we collect all the resulting parts together, not forgetting to pre-drill holes for screws or self-tapping screws. We hide their hats under special plugs;
  8. when making a footrest, use an old rake or shovel handle. The length of the stand should be five hundred and thirty millimeters.

Read on to learn how to make a rocking chair out of metal with your own hands.

The video below shows another interesting and fairly simple way to make a rocking chair with your own hands from plywood sheets:

metal

Metal structures, although more difficult to manufacture, are much stronger, and a rocking chair made of it is more durable. But at home, many of us will not be able to cope with metal work, because not everyone knows how to use welding, with which parts are connected.

To begin with, the necessary materials and tools are purchased at the construction market or store:

  • steel bars with cuts 20x20 mm;
  • 2mm steel sheet;
  • corners made of steel 40x40x3 mm;
  • welding machine;
  • drill;
  • grinder or hacksaw;
  • set of metal screws.

Manufacturing instructions:

  1. making a drawing. It looks like an ordinary chair, but a wide arc is described around the lower extremities of the legs. Note that all sizes are taken from the same chair. As for the arc, the wider it is, the safer the rocking chair;
  2. we cut the steel bars into segments one meter long and weld them to the main frame. The frame step is five or six millimeters. It is necessary to bend the steel along the oval and weld it to the base;
  3. a two-millimeter steel sheet purchased by us is screwed to the part for the seat with metal screws. In principle, the rocking chair is ready.

After making the rocking chair, do not forget to clean all the welds with a grinder or a file. Also ready product should be treated with an anti-corrosion agent or painted.

It is worth noting that sitting on the metal is not very comfortable. Therefore, pillows are often placed on the seat or trimmed over the metal with wooden planks.

DIY rocking chair made of metal

from wood

  • bottom bench. It consists of a covered proleg, a bearing cross, a sub-beam and a frame for seat support;
  • seat;
  • back;
  • armrests.

Process description:

  • we prepare about twenty-five long wicker three centimeters in diameter and many thin, five millimeters thick;
  • with the help of a clamp ( special tool) bend thick;
  • with thin rods we fix the legs of the frame on the cross and the seat frame;
  • we tighten the prolegs;
  • set arrows;
  • we mount upper part backs and transverse bars of the seat;
  • we weave armrests from rods and fasten them to shooters with the help of carnations;
  • we attach the upper ends of the rods of the armrests to the side shooters;
  • having prepared the typesetting rods, we put them on the back of the seat;
  • we decorate all the elements of the chair with decorative weaving from a thin threaded ribbon.

Photo of a rocking chair made of vines, made by hand

Drawings, videos and photos

Our review presents all the most popular models of rocking chairs with sizes that you can make yourself. For greater clarity, we have provided all descriptions with drawings, photographs and video reviews. We really hope that the materials selected especially for you will help you design the rocking chair of your dreams. And you and your family members will enjoy using it.

DIY rocking chair drawings

boomerang type
beech
From plywood

ornate

Fitting © 2022 Design and interior of apartments