What can be done from a 2 liter bottle. Ways to use plastic bottles in a modern country house. Products from plastic bottles for summer cottages

Empty plastic bottles create a lot of inconvenience. You can’t throw them into the trash can, since just two thrown bottles instantly fill it. Many are wondering what can be done from plastic bottles and how it can be usefully applied in the economy. If you think and show a little imagination, it turns out that almost everything can be made from a plastic bottle, from a feeder to an original garden arbor.

Products for the home

Consider what useful household items can be made from a simple plastic bottle. One of these useful products is a cosmetic bag. To complete the bag, you will need two containers with a volume of 5 liters each.

And from the bottoms of ordinary bottles of 1.5 and 2 liters, you can easily make coasters, photo.

original boxes

Various little things, for example, spools of thread, pencils, small toys will be perfectly stored in neat boxes made in special style. A certain design will be given to them by the upper fabric part, which is sewn to the cut off bottle and tied in the form of a bag. Such a container is decorated to your liking: with children's stripes, bows, ribbons, beads, buttons, etc., photo. Stickers or cut-out figures are glued onto the plastic part. Children will love these boxes, they will love to collect their treasures in them, which will have a beneficial effect on cleanliness in the house.

mobile phone holder

From a plastic bottle with a volume of 0.5 liters, you can build a very useful holder for mobile phone. You will need it if there is no place near the outlet from which you can charge the phone this device. To build such a holder, a plastic container is cut so that a mobile phone can be placed in it in vertical position, and also cut out round hole for the junction of the plug and socket.

Plastic bag dispenser

If you are tired of plastic bags lying around the kitchen, a plastic bottle bag dispenser will help you to place them in one place. A 3 liter container is suitable for this. Her bottom and neck are cut off in a narrow place and attached upside down to the door. Bags can be folded into the upper wide opening, and it is convenient to get one bag from the lower narrow one.

Children's bracelets

Kids will love the fun bracelets made from plastic bottles, especially if you let them get involved in the making process too. A one and a half liter plastic container is wrapped in several places with double-sided tape and even rings are cut out in the form of bracelets. Then the protective film is removed from them and multi-colored, suitable-sized patches of felt or other dense fabric are glued to the sticky surface. Beads, bows, buttons and other small accessories are sewn to this surface.

Original curtain

If you want to surprise your guests, you can assemble and hang a stylish curtain from the bottoms of plastic bottles in the room. Especially it will fit into the interior in high-tech or modern style. Of course, the longer and larger you want the curtain, the more bottles you will need to make it. For plastic containers with a volume of 1-1.5 liters, the bottom is cut out so that it resembles a flower. Closer to the edges, holes are made with a hot needle and a fishing line is pulled into them. Then they collect all the flowers on a fishing line in the form of a curtain. Such decoration is usually hung in a doorway or near a window. You can change the color of the curtain by choosing colored bottles, or use spray paint to decorate the product to your liking.

To produce a stunning effect, a hole is punched in the middle of each flower and a diode is inserted. Then the curtain can shine like a beautiful garland.

Flower pots

Can be made from a bottle original pots for flowers. Some cut a hole in the side of the container, some cut it in half. In this case, the fantasy is limitless. And if you cut and decorate the bottles in a certain way, you get such masterpieces.

Products from plastic bottles for summer cottages

Of course, most uses for empty plastic bottles can be found in the summer cottage. They are used to construct irrigation devices, fences, decorations, interior details for a country house and other useful things.

Sprinkler

One of the most simple designs from a plastic bottle is a sprinkler. It is very easy to make: many holes are pierced in a plastic bottle with an awl or cuts are made with scissors. Then the finished sprinkler is added dropwise near the plants so that only the neck looks out of the ground. After that, water is poured into it, which, gradually seeping through, will irrigate the earth.

Also, for convenient watering, they actively use the watering bowl known from childhood, which is done by piercing the lid in several places.

Plastic lamps for giving

If in your country house there is not enough lamp or chandelier, you can easily make an original and interesting version of plastic bottles. For this, empty containers with a volume of 0.5 liters in the amount of 35-50 pieces are suitable. The upper parts of the bottles are cut so that petals are obtained, which are then straightened and given the desired shape, photo.

Then the transparent flowers are painted in any color to taste with the help of spray paint. You can also decorate them in two or three colors. All products are attached to a wire ring with a wire and suspended from the ceiling with a rope.

There are options for other fixtures that frame and mask a simple light bulb. Most importantly, don't let plastic elements touched the light bulb, otherwise they will melt and give a very bad smell. You can also use energy saving lamp which doesn't get very hot.

Garden fence

Many summer residents are wondering what can be made from bottles for a flower bed that would perform a certain function and at the same time look beautiful and aesthetically pleasing. This option includes a fence of empty bottles. It is very easy to make, just stick plastic products into the ground along the entire border of the garden. Only first they should be filled with sand and closed with a lid. The advantages of such a fence are obvious: the earth is not washed out by showers, and they always look neat.

For the construction of this fence, you will need a lot of empty bottles, so it will take a long time to collect them. They must be the same size.

Decorative decorations for a summer cottage

Can be made from bottle plastic decorative flowers and butterflies, they decorate a metal fence in the country, flower pots, hang on a tree, etc. Petals or butterfly wings are cut out of plastic with scissors, and then the edges are melted so that they take the desired shape. When heated, the plastic takes the required form quite well. A thick wire is used to form the stem. Stamens are made of beads, the product is decorated with different colors. It turns out very beautiful and original, photo.

If you want to decorate your site with large spectacular products Make a palm tree using green and brown plastic bottles. But first, they need to cut off the bottom. The barrel is made of a wooden or metal rod, on which brown bottles are strung upside down. Branches are obtained by stringing green bottles on curved rods. Do not forget to arrange the edges of green bottles in the form of leaves.

Various funny little animals at their summer cottage look very cute. Recently, they often decorate not only cottages, but also adjoining territories in front of high-rise buildings. With their cute appearance, they cheer up not only children, but also adults. What can be made from empty plastic bottles? The simplest is pigs. You just need to cut and bend the ears, attach the tail and color. But there are many crafts and more complex ones. Very often they make swans, hedgehogs, kittens and other characters. Here are some more examples of what can be made from plastic bottles, video.

bottle path

From the bottoms of plastic bottles, a very beautiful and useful path is obtained. Please note that they should be laid on loose sand so that the parts can be well stuffed with them. This will eliminate the possibility of their deformation in the process of walking. This path has useful advantage She does a great foot massage.

Household products for summer cottages from plastic containers

If you want to make something useful out of an empty plastic bottle, we have several options.

Wash basin

From just one empty bottle you can make a convenient outdoor washbasin. A plastic container with a closed lid and a cut off bottom is turned upside down and suspended from the base. Then fill the bottle with water. When the lid is slightly loosened, water will pour out. By the way, such a washbasin will be very relevant for a picnic. It takes up little space and can be hung from any tree.

Still, it’s better not to cut off the bottom of the washbasin to the end, but leave it as a lid that can be easily closed and opened. It is needed to protect the water from the ingress of leaves, insects and other debris.

Mosquito trap

To sit quietly in the evening in nature, you can not do without a mosquito trap. It is very easy to make it. Need to cut off the bottle upper part and push it into the other part with the neck down. To make insects more likely to fly into the trap, darken it with cloth or paper.

The bait is made from sugar-yeast syrup. A trap with such contents will attract not only mosquitoes, but also flies, wasps and bees. Don't forget to clean it periodically.

Tool boxes

To make drawers fit bigger bottles rectangular shape. One side of the bottles is marked with a marker and cut with scissors. Here are all the boxes ready. It is convenient to store various little things in them: nails, bolts, screws, dowels, nozzles and more.

Greenhouses, gazebos and other structures made of plastic bottles

Entrepreneurial people try to save money and come up with expensive greenhouses together great alternative from plastic bottles.

Plastic bottles - affordable and inexpensive material, which, in addition to its direct purpose, can be used to decorate a personal plot. From plastic, you can create a lot of decorative and practical elements. landscape design that will be original, strong and durable.

The main task of craftsmen and amateurs to build crafts from improvised means is to collect as many bottles of different sizes and colors as possible, show imagination and bring it to life.

Recycling bottles: functionality and decorativeness of plastic products

During holiday season many summer residents accumulate a lot of empty plastic bottles left over from picnics. You can send them to a landfill, or you can use them to change the surrounding space and make unusual accessories to decorate the garden.

Recycling plastic bottles for arranging a garden plot has a number of advantages:

saving money that would have to be spent on the purchase of finished design products;
exclusivity and originality of the created crafts;
changing landscape design in the shortest possible time - working with plastic bottles is very simple and usually it takes from 2 hours to 2 days to make a simple craft;
Opportunity to show off your design skills ready product emphasize the creativity and creative potential of the owner of the plot;
reusing bottles reduces environmental pollution, because, as you know, it will take many years for plastic to completely decompose in natural conditions.

On a global scale, an abundance of plastic has been adapted for the construction of floating islands, residential buildings, energy-saving systems and large installations.

On the local scale of the suburban area plastic bottles found their application in the creation of:

flowerbeds and flower beds;
flowerpots and planters;
garden gazebos;
canopies and hedges;
ornaments for a garden and reservoirs;
country furniture;
lampshades for lamps;
garden paths;
figurines of animals for playgrounds.

There are many ways to use waste packaging. Consider the most interesting ideas of reincarnations and describe the process of creating DIY crafts from plastic bottles.

Crafts from plastic bottles - original elements of landscape design

creation of flower beds and flower beds

Plastic bottles can be used as a low fence for a flower bed or container in which flowers and garden plants will grow.

For fencing flower beds, the same 1.5-liter bottles are better suited. To give brightness to the landscape, it is advisable to paint the plastic container in yellow, red or blue color(green - not recommended, as it will be "lost" against the general background of plants).

Work order:

It is necessary to determine and outline the contours of the future flower bed (they can have the most intricate configuration).
To ensure the strength and stability of the structure, plastic bottles must be filled with sand or earth.
Dig a row of bottles along the perimeter of the flower bed so that there are no gaps between the elements of the fence.

As a result of the work done, a well-groomed and tidy flower bed will turn out.

Large plastic bottles make an excellent flowerpot or flower pot, the main thing in the manufacture is not to forget to make drainage holes in the bottom.

Let's consider step by step the creation of a hedgehog flowerbed, in which you can plant the most different plants: cacti, high lawn grass, perennial dwarf shrubs And so on.

As a basis, you need to use a 2 or 3 liter plastic bottle. It is cut in half lengthwise. The front part of the container must be wrapped with nylon tights or burlap - this will be the muzzle of a hedgehog.
The fabric is glued or stapled together. From black buttons and a black piece of fabric, you need to make eyes and a nose of a hedgehog, and then sew them to the base.
Make holes for drainage at the bottom of an impromptu flower bed, fill it with earth and plant plants (it is desirable that the shape of the leaves resemble needles).

The result of such creativity will undoubtedly please all visitors to the garden plot, especially children.

The original decoration of the garden will be an "all-season" flower bed, lined with multi-colored plastic bottles.

After placing all the bottles, as shown in the diagram, the flower bed must be given clarity and stones laid out along its contour.

Near the house, gazebos or throughout the garden can be placed hanging planters from bottles.

decorations for artificial reservoirs

The surface of the pond can be decorated with homemade water lilies or non-trivial daisies. Flowers from plastic bottles will add picturesqueness to the pond and attract the attention of beautiful butterflies and dragonflies.

To create water lilies you will need:

plastic bottles of white and yellow color of small capacity (1-1.5 liters);
plastic bottle of 5 liters;
candle;
scissors;
green paint;
glue.

Working process:

From the yellow bottle you need to cut off the neck - this will be the core of the water lily. Make 8 cuts in the neck at the same distance from each other and give each part a rounded shape.
For the manufacture of stamens, we use the rest of the bottle. We cut a strip about 4 cm wide and across, up to half, we make cuts every 0.5 cm.
We turn the blank of stamens and bring it to the flame of a candle (the distance to the fire is about 5 cm). The stamens should curl inward.
We also hold the core over the fire, so that the petals are slightly bent.
We glue the stamens and the core.
From a white bottle we cut out oblong petals of a water lily and fasten them with glue to the neck of a flower.
From the bottom big bottle cut out a leaf for a water lily and color it green.
The flower must be "planted" on a leaf and sent to sail through the pond.

Daisies from plastic bottles will help decorate both the pond itself and the area around it.

You can make a palm tree from plastic bottles and place it near the pond - this will add exotic landscape design.

Bottles with a cut bottom (dark color) are exposed and pressed tightly against each other. The number of bottles used determines the height of the palm tree. A neck from a green bottle is attached to the top of the palm tree, through which five wires (the bases of palm leaves) are made.

Green bottles are strung through the neck on a wire. Green plastic is cut into strips, imitating palm leaves.

Around the pond, you can seat funny frogs that will enliven the landscape of the site and cheer up the guests of the garden.

plastic bottle garden paths

Interesting solution - garden paths for giving from a plastic bottle. Paths can be laid out from whole bottles filled with sand, or from their bottoms.

Bottom paths look neater, but it will take a little more time to create them:

decorative figurines and installations

A modern and popular trend in garden landscape design is the creation of three-dimensional installations and small decorative figurines from improvised materials, including plastic bottles.

On the branches of berry bushes, on fruit trees or in a flower garden, you can “settle” bright bees from plastic bottles. Such a decoration is impossible better fit suburban area on which the apiary is located.

To make one bee you will need:

1 liter bottle with a wide neck;
2 ribbed bottles;
wire;
2 lids white color;
scissors and glue;
paints (gouache) and varnish;
napkins;
a piece of black wire.

Work sequence:

Paste the base of the product (bottle) with napkins, dry it and paint it with gouache in yellow-black color. Open the surface of the craft with varnish - this will save the “bee” from dampness.
Cut out 4 wings from the ribbed base, shaped like leaves.
We form a bee stigma. We glue the eyes (small white covers) and the mouth (a piece of black wire).
We attach the wings to the base, and draw pupils on the eyes.
We make paws from wire, there should be three pairs of them. We fasten the paws to the bottom of the base (under the wings).

You can make a bee swarm using bottles of different sizes.

More time and materials will be required to create a three-dimensional installation in the form of different animals. You need to be patient, because you need to lay out whole containers or parts cut out of them according to a certain pattern.

The playground for children can be decorated with funny animals made of plastic bottles. Such figurines are easy to make and can be made together with the child.

uses for plastic bottle caps

Corks from plastic bottles are also used as landscape design decor.

Most interesting options lid applications:

To create a composition, you will have to stock up on a large number of covers of different colors, so you need to plan a future craft in advance so that there is time to search for material.

Practical use of plastic bottles

country house and garden gazebo

On a small summer cottage, you can build a house or a garden gazebo, using ordinary plastic bottles filled with sand instead of bricks.

The walls of arbors, greenhouses and houses are laid out in a checkerboard pattern using cement mortar. When working, you need to take into account some of the nuances:

plastic does not come into contact with cement mortar, like a brick, so holes must be made in the container - the cement will interact with the sand inside the bottle;
to improve the adhesion of the surface of the bottle with the solution, it is desirable to lay a reinforcing grid between the rows of masonry;
in the process of laying, the rows of bottles must be fixed with a rope or wire so that they do not move apart.

Under the influence of frost and heat, plastic is destroyed, so the life of bottle structures is small - about 5-10 years

Garden furniture

Plastic containers are a unique material for creating practical country furniture. You can independently produce traditional or exclusive, avant-garde furniture models.

Plastic bottles can be quickly and easily turned into a neat and comfortable ottoman for the garden.

Empty open bottles should be kept in the cold (in the summer you can put them in the freezer for a while). Even in the cold, close the bottles and bring them into heat - the air inside the eggplants will heat up, expand and prevent the container from deforming during operation.
Connect the bottles with double-sided tape. First in pairs, and then - in the overall composition.
According to the shape of the seat of the ottoman, we cut out thick cardboard and foam rubber, glue it together.
Wrap the ottoman around the perimeter with foam rubber or batting, and attach a soft seat on top.
Sew a cover for an ottoman: cut out the top (circle or square) and a rectangle (the walls of the ottoman) from the fabric, sew together, leaving room for insertion.
Attach the design and sew the cover by hand.

An ottoman made of plastic bottles turns out to be very light and practical, it can be placed in the garden, gazebo or in a country house.

fences and canopies from plastic bottles

You can save a lot on arranging a fence or a carport if you make a structure out of plastic bottles.

The finished canopy will have a plastic structure and an unusual configuration, it will create a protective barrier from the sun and precipitation, and also decorate the garden.

To retain the sun's rays, the bottom of plastic bottles must be painted

In a plastic container with a red-hot rod, it is necessary to make through holes and thread a fishing line or rope through them. Form several rows in this way.
Between themselves, the rows are connected by perpendicular ties through another pair of holes and material for “firmware” (fishing line, rope, wire).
The "bottle" canopy is attached to a metal or wooden frame.

A wave-like effect can be obtained by attaching a canopy to racks of different lengths.

useful recycled crafts

If the question "What to do with plastic bottles?" remained unresolved, we suggest that you familiarize yourself with useful crafts that will come in handy on any personal plot.

Do not be afraid to experiment and go beyond the usual, and then the most ordinary things will turn into a real work of art.

The trend of rational use of household waste has recently become more and more popular, especially for plastic containers. From plastic bottles, you can do almost everything with your own hands. country interior and not only. One of the main advantages of this material is its long service life, besides it is very elastic. Do not forget that plastic bottles are an affordable material that every owner or hostess always has in stock.

Cheap and cheerful - we make flower beds from bottles

Plastic containers are ideal for as they have a great advantage over wood and even metal. wooden fencing on flower beds or flower beds eventually dry out or rot under the influence of moisture and the sun. Even metal curbs are susceptible to corrosion and require periodic maintenance, such as regular painting.

But what about plastic? It does not lose its shape and does not collapse for a long time. This means that such a flower bed will last more than one season and even more than one year, moreover, it does not require any maintenance at all. Even if a “breakage” occurs, the desired “element” can always be found in the pantry and easily replaced without resorting to long tedious shopping trips in order to find a suitable fragment.

So, what can you do with plastic bottles with your own hands?

bottle borders

If you need to protect the flower garden, plastic containers of different sizes will do just fine. This will not only limit space and prevent growth perennials, but will still retain moisture and prevent weeds from appearing.

The shape and size of the flower bed depend only on the imagination of the summer resident: it can be either equilateral or in the form of some animal or plant. Also, bottles can be divided into segments of the flower bed itself.

Even a child can build a bottle border (with the help of adults, of course):

First of all, on the site you should draw sharp object or fill the contours of the flower bed with sand.
Release the bottles from the labels, wash them, pour sand into them and tighten the cap. If this is not available, you can use ordinary land or water. This is necessary for stability, since empty containers will quickly fall out of the fence.
Dig a groove along the outlined contour so that the bottle can be deepened by about 1/3 into it.
Place the filled bottles in the groove with the neck down, as close as possible to each other, and cover with earth.

For a visual effect, you can use bottles of different colors of plastic (green, white, brown).

Some summer residents do without digging in bottles. For example, bottles without a bottom are simply inserted into each other, forming a circle. Finished construction can be "put on" or take in the ring trunk circle tree. To fix the curb, it must be firmly pressed to the ground with arcs.

Multi-tiered flower bed

If you really want to have a flower garden, and there is a catastrophic lack of space, you can do it yourself from plastic bottles. The principle is the same as for the construction of the curb, only after laying the first tier, it is necessary to fill it with nutrient soil, and only then lay out the next floor.

When planting plants for the lower tier, it is better to choose moisture-loving specimens, since water will flow down when watering.

Mini flower beds

Beautiful and useful crafts for giving can be made from 5-liter plastic bottles. They will serve as miniature and cute flower beds, for example, in the shape of everyone's favorite piglets.

Group compositions in the form of trains with flowers look no less impressive.

And if instead of flowers you sow lawn grass, big bottle turns into a cute hedgehog with green spines. It remains only to attach the eyes and nose.

Those who are not afraid of small rodents will like cute mice from small (liter) bottles. They are good for planting petunias.

Flower pots and flowerpots

With a little imagination, plastic bottles can be easily transformed into small decorative pots for flowers or spicy greens. You can make them even or cut them into a marker in the shape of a muzzle. Such flowerpots will look great not only in garden gazebo but also in the house on the windowsill.

But if you put a fabric cover on a cropped bottle and attach ropes, you will get elegant planters for a summer veranda.

The easiest way to do hanging pots- this is to cut fragments of the walls on both sides of the bottle, and fasten a harness for hanging under the neck. In such flowerpots, compact undersized plants can be planted.

Making a beautiful garden path

Tracks made of plastic containers are especially popular with summer residents. The strength of such a path depends on the laying method and what part of the plastic container serves as a building material:

Paths made of plastic bottles become very slippery in winter.

Fun playground - decorate a place for children's games

Caring parents always strive to give their children a place to play in the country, where children can pass the time while adults are busy in the garden. Of course, it should be not only safe, but also colorful to please the kids. With the help of plastic bottles, it is easy to decorate the playground by making a variety of plants and animals. Ordinary paint will help to give them brightness.

In the shade under a palm tree

What is a playground without a sandbox? And where there is sand, a palm tree must “grow”. For a Tropican, you will need green and brown bottles for the trunk and leaves, respectively.

Before proceeding with the assembly, you need to take care of solid foundation. For example, fix a metal pin in a concrete screed, and it should be quite long so that the tree turns out high, and children can walk freely under it.

When the base is fixed, you can start "growing" palm trees:

cut off half of the bottle (the top with the neck is not needed) and form a jagged edge;
make a hole in the center of the bottom, string the blanks onto the base pin, while bending the teeth to the side for a more natural look;
cut off the bottom of the green bottle and make straight cuts along the entire contour to the place where the wall goes into the neck (if desired, the branches can be made curly - cut into 4 parts and place cloves on each);
string fragments of the branch on the base;
firmly attach the finished branches to the top of the stem (by welding or construction harnesses).

If after assembling the palm tree there are still many green bottles left, you can make a small (or large) Christmas tree from them. Remove the bottom from the bottle and cut it into long narrow strips right up to the very neck. Trim the edges of the strips to look like thorns. Thread the leaves onto the base.

Such a Christmas tree will look great on the site in winter, especially under snow, and will also help out on New Year's Eve those who, in a hurry, did not have time to buy a living tree.

Guests from a fairy tale - funny animals

And of course, there must be toys. Often children take their old pets outside. With the help of plastic bottles, you can easily diversify the "zoo", creating real masterpieces - from the fabulous Frog Princess and the Golden Fish to modern cartoon characters.

Take at least a handsome cat, painted in black and white paint. And you can use brown beer bottles, and you get a brown cat, also beautiful.

From the two bottoms of the bottle, form a head (connect them), while the bends on the bottoms will really look like a real head. On one of them, draw eyes, eyebrows and mustaches with white paint, and a neat tongue with red paint. From above, insert cut out small ears. For the body, string the same short cut bottoms onto the base, close the body last. Melt the edges of the bottoms. Walk along the melted contour of the ears and fragments of the body with white paint, and on the front bottom make a white speck on the breast.

Glue the head and legs - the upper parts from bottles with an elongated neck will come in handy for them. Cut them off to the point where the bottle expands, cut the edges with sharp teeth and build legs from 4-5 parts, putting them on the base wire. Screw the corks onto the upper necks, glue the paws to the body with them. For the tail, take a long wire and string the narrowest parts of the neck onto it, but without plugs. To make the tail fluffy, cut the edges into thin strips.

Beautiful animals are also obtained from large 5-liter containers. With the right combination of bottles of different sizes and with the help of bright coloring, you can place a zebra, a horse, a cow, a donkey and even a giraffe on the site.

Flowers for my daughter

In the sandbox, children not only sculpt Easter cakes. Little girls are very fond of flowers and often pick dandelions on the lawn (or in their mother's flower bed) to plant in their sand garden. But you can make a whole greenhouse of flowers out of bottles, while the girls will be happy to take part in the manufacture of the most simple options. Daisies, cornflowers and tulips will decorate the sandbox, especially since young flower growers will be able to repeatedly "transplant" them from garden to garden without harm to plants and mother's nerves.

For flowers you will need:

stem wire;
flat parts of bottles for cutting leaves from them;
necks or bottoms for the most inflorescences;
dye.

More complex options can be done by adults. plastic roses or poppies will decorate not only the playground, but also flower beds.

plastic design for garden

From plastic bottles have an extensive scope. So, if small animals and birds look appropriate in flower beds and playgrounds, then larger-scale animals can be placed in the garden, among trees and shrubs. They will give the garden a unique look and enliven it.

Amazing Garden Sculptures

Representatives of large birds made of plastic look almost alive. With the help of multi-colored paints, you can achieve amazing realistic effect. To make them, you just need to master the technique of cutting feathers from the sides of bottles and prepare a frame on which they will be fixed.

Very impressive in the garden will look:

In the garden, you can place sculptures not only of birds, but also animals of a large enough size so that they do not get lost against the backdrop of tall trees.

Among the greenery, a bright spot will be a white sheep, which is quite easy to make if there are bottles of 2 liters and several 1.5 liters lying around in the pantry:

Cut off the necks of two 2 liter bottles and put them on top of each other - this will be an elongated head. From the third bottle, cut out long ears, roll them up a little with a tube and attach to the head in the appropriate places with wire (or glue). You can draw eyes or glue two plugs.
For the body, insert the whole neck into the bottle cut off from the top. Make 3 more such blanks and attach them to the first on the sides and top, thus giving the lamb the desired “waist” volume.
A whole two-liter bottle will serve as a neck, which should be fixed on the body at an angle of about 120 degrees so that the cork is on top.
To the neck (on the cork) set the head.
For legs cut off at two liter bottle upper part and insert a whole bottle of a smaller volume (1.5 l) into it. Make three more such blanks and attach the legs to the body with the wide part up.
From the cut bottoms of two-liter bottles, make a fleece, fastening them together, and put on the body. Under the belly, tie the edges of the fur coat.
Paint the sheep with white paint and draw black eyes.

Bird care

Plastic bottles can be used not only for decorative purposes, but also for the benefit of the garden. After all, it is always inhabited by the summer resident's little helpers - a variety of birds that collect pests from trees. In warm summer time they have something to eat, but in winter it becomes more difficult to get food. That's when the feeders hung around the garden come in handy. And if you involve children in the process, you get a double benefit: for children - an interesting activity and pleasure, and for birds - cozy house with grains.

The simplest can be made from large 5 liter plastic bottles, simply cut out on both sides big holes in the form of an arch.

So that the birds do not injure their paws on the sharp edges of the bottle, they must first be melted or pasted over with electrical tape.

For those who rarely visit their summer cottage in winter, a feeder that fills automatically is useful.

You can make it from a bottle and two wooden spoons:

make two holes in the bottle opposite each other, while the second should be slightly lower;
unwrap the bottle and reverse side repeat the procedure;
insert spoons into the holes crosswise.

After the bottle is filled with food, it will be poured through the holes into the spoons as they are empty.

A cozy place to relax from improvised means

Not only birds, but also the owners themselves should have their own secluded corner among the greenery, where on warm summer evenings you can enjoy a cup of tea, inhaling the aromas of nature. Many prefer to put in the garden. They are very beautiful, you can’t argue with that, but they require certain financial investments. But from plastic it is cheap and cheerful to make not only a recreation area, but also to completely equip it.

Alcove? Easily!

Arbor - one of the largest crafts for giving from plastic bottles. But plastic gazebo has two big advantages:

it is easy to assemble;
will last more than one year without damage to the material.

Perhaps the only drawback of the building is the presence a large number bottles that need to be stored somewhere during the collection process.

What the gazebo will look like depends only on the desire of the owner, and, accordingly, on the availability of “building materials”:

Practical curtains in the gazebo

In summer pavilions there is a lot of fresh air, but, unfortunately, also dust. Ordinary tulle requires frequent washing, while a plastic curtain does not collect so much dust, and you can “wash” it without even removing it - just pour it over with water from a hose (of course, if such a curtain does not hang in the house).

For dreamy and romantic hostesses, delicate curtains made from the bottoms of plastic bottles, strung on a base, are suitable.

Energetic people who love bright colours, cork curtains assembled according to the same principle are more suitable.

garden furniture

A table, ottoman, armchair and even a sofa in the gazebo can also be made from plastic bottles. The old one from the house is also quite suitable for relaxing on fresh air, but she, like the curtains, will eventually become a collection of dust. In addition, it is quite difficult to take a wooden sofa outside, because such furniture is rather bulky and heavy. But rearrange plastic chair won't be difficult.

It is not difficult to assemble furniture - you just need to put the bottles tightly and connect them with adhesive tape, giving the desired shape. For ottomans, knit or sew a cape - from the outside, no one will guess what they are actually made of.

Leatherette covers are more suitable for a sofa.

Unbreakable garden chandeliers

If you plan an evening tea party, you should definitely spend it in the gazebo. To ennoble the light bulb, you can cut the bottle into two parts and make a simple ceiling lamp from the upper half and paint it or paste over it with colored thread.

AT plastic chandeliers it is better to use economical light bulbs - they do not heat up so much and will not melt the material.

In more difficult options chandeliers are assembled from fragments of leaves or flowers cut from colorful bottles.

Garden supplies for gardening

To make the summer cottage look beautiful and tidy, you need to take care of it all the time - weed weeds, collect fallen leaves and small debris. This will require tools. Of course, it will not work to make a chopper or a rake out of plastic, but simpler specimens are quite possible.

Craftsmen have long known how to use plastic bottles for their own benefit and savings for the family budget. After all, if the scoop suddenly breaks, you no longer have to run to the store for a new one. From household waste that is in every home, you get a lot of useful things at no extra cost:

garden care

From plastic bottles you can make useful things not only for the garden, but also for the garden. It could be like small crafts in the form of, and larger-scale structures such as greenhouses.

Greenhouses for seedlings

Most summer residents grow seedlings horticultural crops on one's own. Some do it in apartment conditions, but better seedlings are obtained from greenhouses - there is enough heat and light.

You can no longer talk about the cost, but as for durability, plastic bottles will certainly last longer than film shelters or glass structures.

To increase the service life of plastic bottle greenhouses, it is advisable to put them on the foundation, and use a metal profile for the frame.

The simplest version of the greenhouse involves the construction of walls from whole bottles that are put on top of each other.

It will take a little longer to tinker with the greenhouse of the plates, but it will turn out to be warmer. In this case, even parts must be cut out of the bottles and fastened (sewn) together in the form of a canvas. From the finished canvases, mount a greenhouse.

Watering "systems"

For gardeners, watering is no less a pressing issue than the presence of a greenhouse. Instead of ready-made watering systems in the garden, you can use. They must either be suspended above the bush, having previously made holes in the lower part, or dug into the ground.

In addition, the bottle makes a good sprinkler - you just need to make small holes in it and connect it to a watering hose.

Getting rid of pests

A plastic bottle repeller will help drive you out of the area worst enemy summer resident -. He not only plows the beds, digging his tunnels, but also damages in the course of action root system plants, depriving gardeners of the future harvest.

If cut in a bottle side walls, bend them and put the container on a steel bar, with gusts of wind, the bottle will spin and make noise. The sound through the rod will go into the ground and deprive the mole of the desire to manage in this noisy place.

The list of what you can make from a plastic bottle with your own hands is quite long. These are just a few crafts that make life easier for summer residents. Agree - it is better to get the maximum benefit from bottles than to pollute the environment. Take care of nature and work with pleasure!

21 ideas for using plastic bottles - video

Masters and beginners use crafts from plastic bottles for the interior, as garden decor and in the form of practical furniture. Colored caps from plastic bottles - great material for mosaic panels on walls and fences. Best ideas with detailed instructions and the photo is easy to embody in the country, turning a bare area into a "glade of fairy tales", and filling the house with useful little things.

One of the most crazy hands Runet Roman Ursu presented a crazy video in which he showed 70 ways to use plastic bottles.

Advantages of crafts from plastic containers

A well-made souvenir or trinket will eventually develop into a hobby if there are no limits to fantasy. Do not cease to amaze summer residents who have moved from simple hedges on a wire to buildings that delight in scope.

From available material, which many throw away, someone constructs:

greenhouse;
carport;
summer shower or bath;
country toilet or shed;
summer gazebo or sun visor;
a teremok for children or a playground;
sandbox with decorative borders;
various temporary structures on the site.

Plastic eventually becomes a real environmental disaster - it is difficult to recycle. But it is enough to involve all those who are not indifferent to the cleaning of the territory, and there will be a whole mountain of empty PET bottles for the construction of a greenhouse, a cascading flower bed or vertical gardening. The only drawback is the long collection of the same container, since the containers are produced in different colors and volumes.

For creating original decoration required:

interesting idea;
ready-made role model (illustration);
craft material with tools;
step by step guide to the training plan.

In the hands of a real master, plastic bottles take on a second life, becoming functional objects. Souvenirs are best done on a seasonal basis. For example, christmas toys make in winter, practical country buildings- in summer, and in spring and autumn, it remains to build a "glade of fairy tales" near the house for children.

Furniture and interior items from plastic bottles

Furniture made from plastic bottles looks like a masterpiece that not everyone can afford. They will need a lot of plastic containers of the same sample. Sofas and pouffes impress with their design and comfort, not inferior to real furniture. There is nothing complicated if the sofa is made in blocks - seat, back, sidewalls. If there are not enough containers, sofa blocks can be made alternately. It is better when they collect bottles from one drink, for example, two-liter kvass or lemonade.

The principle of "assembling" furniture from bottles is simple - they are exposed in layers and tightly wrapped with tape. To make the furniture softer and springier, a little air is released from each bottle and twisted tightly. In the place where the cap is, cut out the cap from another bottle and wrap it with tape. It turns out a block, which has a bottom on both sides - this is the basis of the furniture.

Then it all depends on the imagination, the type of furniture and the number of bottles available. We wrapped 7 containers of the same volume with tape, we get the basis for an ottoman. What will be its appearance and style depends on the master. For a soft seat, you will need a round pillow or a block of foam rubber according to the size of the top. The cover is cut out according to the size of the ottoman in the form of a cylinder, and it is convenient to insert a zipper along the side seams, but it is easier to sew up the upholstery tightly.

For construction coffee table you will need 4 racks of plastic bottles and a plywood shield as a tabletop, which can be hidden with a long tablecloth. In a similar way, they make a convenient stand for a laptop or a remote table for giving. For large furniture (sofa, chaise lounge or chair) from plastic bottles, you will need a lot of patience and source material.

Useful little things for the house from plastic bottles

Flowers and vases

It will not be difficult to decorate a schoolchild's bedroom or a children's room with crafts from plastic containers. You can build a whole bunch of artificial flowers. Put the resulting chrysanthemums, daisies or roses in a vase of the same material, adding the middle with diode bulbs on insulated wire. This is how a night lamp of extraordinary beauty will look like, where a weak light shimmers in plastic petals.

Advice: To give the leaves a special shape, use the heating of the blanks and folding the corners with tongs!

To place a homemade bouquet, you will need a suitable vessel, just cutting off part of the bottle is not aesthetically pleasing. The edges of the cut are marked with a ruler to make a cut, fixing the result by heating the bends. A small transparent bottle is cut off to the very top, about a half is cut off from a large container. We choose a material with a corrugation or a “waist” in the middle so that there is an interesting base.

Then we do as fantasy allows, but we bend the edges beautifully. A fringed cut is obtained from vertical or diagonal notches plastic base. The resulting strips are evenly bent to the outside.

Note! It is important that all the notches and the depth of the slot are exactly the same, then the whole product will come out neat.

Depending on which edge is desired, the strips of the vase (the edges of any other product) are fixed in different ways:

curly bend;
stapler staples;
fusing;
bonding with transparent polymers.

Planters, flower pots and containers for seedlings

color plastic container in the form of bottles and bottles of different sizes suitable as containers for growing live plants. It is very easy to make a fragrant balcony from 3-liter tanks - cascade ampelous petunias. fragrant flowers, hanging from cut containers, will help to realize the dream of a beautiful piece of paradise.

cut in half big bottles and the tanks are hung upside down and with a lid. At the bottom it is recommended to lay large pebbles for drainage. Excess water after watering will go to the plants in the lower rows. In the same containers, plants are grown without soil - in a hydroponic way with the addition of fertilizers. Fresh herbs and seedlings (in urban and country conditions) are also germinated in prepared plastic bottles.

Advice: Take advantage of the compact shape and the ability to hang containers for vertical gardening with automatic watering. In the absence of the owners, watering cans with water immersed in the ground will cope with moistening the plants.

Traps and feeders

Using plastic bottles, you can scare away pests or attract birds to the site. To do this, the tank is used as a feeder, and traps from bottles of chemicals are placed at the roots of fruit trees. From a double plastic container, craftsmen build traps for wasps, where they fly into sweet water and cannot get back.

Equipment of the suburban area

At the cottage "on hastily» It is easy to build crafts from plastic bottles in the form of an impromptu washbasin by hanging a full bottle upside down. It is worth unscrewing the lid a little, and a small stream of water will help to wash and wash your hands. It is also worth making a bench and organizing lighting with beautiful owls or gnomes of their plastic. Any garden decor for inspiration - on interesting illustrations.

Multifunctional items for the home

Make an original cosmetic bag from 2 bottoms of plastic bottles, sewing the edges with a zipper. This box can be used as a multifunctional item - a piggy bank, a case for large beads, hairpins or jewelry.

From a similar ball, suspended somewhere nearby, it is convenient to knit, pulling the thread from the ball inserted inside. Nail polish or a lipstick collection is easier to find in a makeshift zipper box.

New Year's decor

Original all seasonal flower beds

The summer season is over, and home-made plastic flowers are replacing the living flower beds, which are not inferior in beauty to real ones. Their advantage is the ability to decorate the territory at any time. These flower beds fade against the background of living plants, but in early spring and late autumn only they attract admiring glances.

For daisies, you will need small plastic containers of white (petals), yellow (middle) and green (leaves). You will also need an awl and a candle (for heating), “liquid nails”, scissors and hard wire in green insulation.

We cut the base of the white bottle to the center, marking 16 segments - these are the petals. We bend the neat edges over the candle flame, we also make 2-3 chamomile corollas, which we connect in the center with an awl. Here the stem with leaves is fixed on the green wire, closing with the middle. We fill the center of the flower with a yellow basket with small cuts from 2 finely dissected circles with a fringe bent over the candle. We supplement the flower with green sepals from the bottom, collect all the parts and fix them together.

From the remaining pieces of green plastic, cut out leaves with a hole at the base (for stringing) and give the desired shape by heating over a candle flame. We fasten leaves on a wire handle, they should slightly bend around it. It remains for chamomile to make a few "companions" and find a decent place for the bouquet.

All seasonal flower beds include mosaic compositions from containers filled with earth. Made from lids wall panels. "Butterfly" or "ladybug" - in different versions.

Crafts from plastic bottles for the playground

The incredible beauty of a bird with plastic plumage is a whole “field of fairy tales”. This is a peacock or firebird, swans, doves, bullfinches and parrots. All of them are made from empty PET bottles according to the general principle:

Design an aesthetic bird head with eyes and a beak;
Build the torso and neck;
String plastic plumage;
Provide wings and tail;
Plant on paws or fix on the selected surface.

Plastic swans can be fenced off with a blue "lake" of inverted plastic bottles. Outlandish birds will decorate the trees in the corner of the garden, which is reserved for children's games. You can choose a themed decor, such as a desert island with palm trees and parrots.

The material is collected for a whole year, but it is easier to involve neighbors and acquaintances in the idea of \u200b\u200b"ecological" cleaning. In the yards there are special containers for plastic - it is much easier to collect.

Preparation for work - removal of labels and glue residues from plastic bottles, it is important to rinse well and discard the deformed material.

If vertical hedges, they need to be filled. Depending on the idea, PET bottles are filled with sand, stone chips or dry soil, digging 1/3 neck down.

For selected purposes, plastics of different elasticity are used. Heat treatment required for filigree work (flowers). It is important not to overheat the fragments cut into strips.

Fairy tale characters sometimes require additional painting. For example, pink piglets for a playground are best covered with an aerosol spray, fixed with transparent acrylic paint.

Plastic bottles are an excellent material in skillful hands. Using them as a basis, it is easy to teach children a lesson in environmental education and fill a house or yard practical things. With a creative approach, the color, volume and shape of plastic bottles themselves will prompt new ideas for an exciting creative process.

Tags: ,

Plastic bottles are considered to be garbage and sent to the appropriate places - trash cans and landfills. But in the right creative hands these things can sparkle with new colors. And you don't have to be a master to breathe a second life into ordinary plastic. You just need to have a little patience and imagination.

Crafts are quite simple and everyone can do such things with their own hands. Or maybe for someone this business will become a real hobby.

Useful things from garbage

Plastic bottles have different forms. They are also different in color and size. Therefore, it is quite possible to make small items decor for the garden. And it's perfect for a cottage. plastic furniture or even a summer gazebo built from the same plastic utensils.

And even caps from plastic bottles in skillful hands can turn into real masterpieces - mosaics on the walls, a hot stand, cute toys for a child and other useful little things.

Everyone can make this or that little thing. This is where fantasy plays the main role. After all, the material for making crafts is almost everywhere. They can be found in the park, on lawns, near the river and in landfills.

And collecting them for his creativity, a person thereby purifies nature from harmful things. After all, plastic today has become a real disaster that threatens environment. This material is durable, so the constructed crafts from plastic bottles will serve and delight for a long time.

Where to begin

In every decision, the main thing is a plan of action. In order to start working on the craft, you will need the following:

a detailed description and photo of crafts from plastic bottles or one separate craft to choose from;
bottles of suitable sizes and colors;
additional materials and tools that may come in handy: a knife, scissors, adhesive tape, glue, paint, fabrics, etc.

Then you just need to be patient and follow the instructions. And soon the children will rejoice at the new fabulous playground, guests will be happy to spend time in the "almost crystal" gazebo, and the hostess will appreciate the unusual practical devices in the kitchen.

Boxes

You can make an excellent box from plastic bottles, in which it will be convenient to store various little things: hair ties, buttons, paper clips. To do this, you need two lower parts of plastic bottles of the same size. They are interconnected by a zipper, which is sewn along the edges.

Or a simpler option is to cut off the top of the bottle in the place where it begins to narrow. The container is ready. It remains to decorate the bottle with decorative ribbon, buttons and beads. They are glued on. Sew a cap from the fabric, which is tightened with a cord and glue it to the edge of the container in the same way.

And it’s not at all difficult to make a convenient and original sandwich container that you won’t be ashamed to take to school or work. The main thing is to decorate it with a plan. And it is done in just a few steps.

The bathroom also has space for plastic box, in which you can put all the necessary accessories: toothpastes and brushes, washcloths and shampoos. If these boxes are hung on the wall one above the other, then you can free up space.

Can be made from plastic bottles unusual stand for pencils and pens. It is enough to cut it in a circle in the shape of a muzzle of a cat or an owl and paint it. In the same technique, a vase for flowers is made. Only for its stability, a handful of small pebbles should be poured onto the bottom.

Playground toys and decorations

To decorate playgrounds, decorations are made in the form of plants, animals and even insects.

For a palm tree, you need about 15 brown bottles, from which the trunk of a palm tree is made, and 7-10 green bottles for leaves. The barrel is assembled from bottles cut across, stringing them on a frame made of a strong rod.

To create leaves, green bottles need to be cut lengthwise, forming the desired shape. To make longer leaves, you need to attach an additional one to the main sheet using a stapler.

decorate your garden plot possible even in winter. Funny penguins in colorful hats and scarves will cheer you up on a cold winter day. You can make penguins of different sizes. For one bird, you need two identical bottles that have a "waist" at the bottom.

This bottle needs to be cut in half. This will be the body of the penguin. At the second bottle, you only need to cut off the bottom with a small margin - these are the legs. Connect the two parts with a glue gun, paint. Make a pom-pom out of wool and a scarf out of a strip of fabric.

Such crafts are not stable, since plastic is very light material. In order for the penguins to stand quietly in the chosen place, they must be filled with sand or small pebbles before gluing the parts.

Even plastic lids in skillful hands turn into cute ladybugs. You just need to color them accordingly and stick funny eyes.

If the plastic lids are connected to each other by the edges in the form of a small circle, then you get an original stand for a hot pot or kettle. Such a device is useful in the kitchen.

Flowers and plastic bottles

Flower beds can also be decorated in an original way with plastic bottles. If you take the lower parts of the bottles, paint from within different colors and stick into the ground next to each other, then you can create a flower bed that will "bloom" all year round.

The tops of bottles with caps can also be used as flower pots. They are not stable, but in the form of flower pots they will look fabulous.

From plastic bottles with a volume of 3-5 liters, you get a bright flower bed-train. In each bottle, you need to cut one side part. Paint in different colors. Fill the bottles with earth, transplant garden undersized flowers into them. Lay them horizontally and lean against each other, creating wagons.

Furniture and buildings

building summer gazebo will require more costs and strength. After all, for construction, you will first need to make a frame of wood or metal. The walls are built from whole bottles, which are strung on a wire or rod.

First, a hole is made in the bottom of the bottle, the cap is unscrewed. A rod with strung bottles is attached to the frame in a horizontal or vertical position.

With the help of bottles, you can create a sofa, armchair, ottoman. Here you must first make separate blocks: seat, armrests, backrest. Then connect them, according to the design. Blocks are best made from 2-liter identical bottles.

On the top of the bottle (where the cap is) you need to put on the bottom of another bottle so that the bottom of the bottle is on both sides. All bottles, blocks are attached to each other with adhesive tape. To make the seat soft - you need a foam block right size. Sew a cover according to the size of the furniture.

Photo of crafts from plastic bottles

Categories

Popular