Lamp made from an old lampshade. DIY chandelier: manufacturing methods, examples, photos

Problems with the choice of fixtures are familiar to many. Lamps are purchased last, so combining them with all other interior elements can be difficult. But you should not despair. After all, spectacular lamps can be made independently, without spending a lot of time and money.

1. New Year's decor on the chandelier

Plastic beads, which can be purchased in the department New Year's decor, you can decorate the finished lampshade. Bright colors and shine will turn the lamp into a real decoration of any interior.

2. Urban landscape

The outlines of city roofs, cut out of dark paper, are glued onto a light lampshade. Such an application will easily transform a boring plain lamp.

3. The whole world at a glance

In every house there are old cards that lie unused for years. From them you can make a lamp with your own hands. Just wrap the old lampshade with a piece of the appropriately sized card. For a neater look, the paper can be coated with acrylic varnish.

4. From papier-mâché

To make an original lamp with your own hands, you will have to remember the papier-mâché technique, familiar to everyone since childhood. The paper must be torn into small pieces and left for a couple of hours in an aqueous PVA solution. Then, layer by layer, an object of the desired shape is laid over the paper mass - for example, an inflated balloon. After the papier-mâché has dried, the lampshade is ready.

5. The second life of old newspapers

Just pasting a lampshade with a newspaper artificially aged with tea or coffee is too simple a solution. Cut out circles from it and glue them so that they partially cover each other. Interesting game light and shadow guaranteed. Additionally, it is better to varnish the lampshade.

6. Eternal lampshade

From the old metal basket or ordinary wire, you can make a lamp with your own hands, which will become a champion in strength and durability. In addition, such a lampshade is also completely fireproof.

7. From bright cocktail tubes

A lamp made of cocktail tubes looks democratic, but at the same time spectacular. Just glue the tubes of one of the sides onto the old lampshade with silicone glue. If you cut the tubes in half, the lamp will turn out to be smaller.

8. Chic and shine

Beads that have not been used can be used to decorate the lamp. Thread them onto thin jewelry wire (you can buy it at craft stores) and attach it to metal base lampshade.

9. Clear geometry

Cocktail tubes, painted in gold or silver, will become the material for making a lamp with your own hands. Between themselves they are fastened with a threaded thread.

10. Lace patterns

Just cover or glue a plain lampshade with contrasting lace. In the first case, it is better to use elastic lace: they will fit snugly against the surface of the lampshade and look neater.

11. Paper Chaos

Plain white paper rolled into tubes becomes the raw material for the original lampshade. Glue them together in a chaotic manner, moving from bottom to top.

12. A cozy lamp for needlewomen

All buttons that do not find a use for themselves can be used to make a cute lamp. String the buttons on strong threads, and fasten them to the top of the lampshade.

13. In harmony with nature

A branch of an intricate shape will be an excellent basis for an unusual lamp. In addition to it, you will need several light bulbs in cartridges. Just wrap the wires around the branch.

14. Almost edible chandelier

The base from an old lampshade, decorated with cutlery, looks quite brutal. Such a lamp will perfectly fit into the interior of a country-style kitchen or loft.

15. Delicate textile petals

For the manufacture of such a lamp, a fabric is selected whose edges do not crumble. The petals cut out of it are attached to the lampshade with glue.

16. From decorative rope

Generously smear the base for the future lampshade with a thick one and wrap it tightly with a rope with a rough texture. It is not necessary to use an old lamp as a basis. Suitable even old crockery such as glasses or bowls.

17. Lamp in a skirt

Translucent textiles, for example, tulle from old curtains, can find a second life. Having collected it in the upper part in folds, fix it on a boring lampshade.

18. Patchwork

A lot of multi-colored shreds are tied on the basis of an old lampshade. The more of them, the better.

19. From favorite postcards

Often postcards and photos, even those that you like, lie idle for years. Paste them over a boring lamp, and it will instantly change.

20. Our whole life is a game

A deck that is missing a few cards should not be thrown away. dense glossy paper with contrast pattern great material for lampshade decor, practical and beautiful.

So, the lighting problem is solved. It's time to familiarize yourself with

The chandelier in the room is not only a lighting fixture. Without exaggeration, we can say that she is the main decoration of the room. Handmade items are considered especially valuable. This allows you to highlight the special taste of the owners of the home, as well as an outstanding and creative mind. Of course, this type of work is quite complex and requires increased concentration. But at the same time, when creating decorations for your home, you can find many interesting and extraordinary solutions in it!

This article presents some ideas for decorating a chandelier with your own hands, as well as instructions for them. Everything is written so simply and clearly that anyone can do what they have planned at home.

In order to make a chandelier, sometimes the most unusual materials are used. For example, everyone is already familiar with glass or wood, plastic, and so on. But sometimes, when you want something completely “unusual”, both wooden skewers and glass bottles out of wine, and cans, and all kinds of tree branches, and cardboard, and even straw. You need to choose depending on the idea of ​​\u200b\u200bthe creator and on the wishes of the owners of the apartment. It is also necessary to take into account general interior premises where the finished product is supposed to be placed.

An interesting idea for a chandelier made of plastic spoons

Plastic disposable spoons are one of the simplest and most readily available materials for creating a chandelier for a room. Their advantages are low price, a variety of colors and such material will serve quite well. long time. To create such an extraordinary chandelier, you will need a minimum of investments, both physical and material.

Materials:

• empty bottle of drinking water, 5 liters;
• plastic spoons (their number depends on the size of the bottle);
• glue for plastic;
• old chandelier(or rather, a cartridge from her);
• sharpened knife.

Process of creation:

1. First you need to prepare a plastic bottle for the next steps. Remove the label in advance, cut off the bottom, dry well.
2. Then you need to get the plastic spoons out of the package and carefully cut off unnecessary handles with a knife, leaving about 2-3 centimeters above the level of the "scoop".
3. You need to glue the “scoops” blanks to the base of the bottle. On the left "tail" apply a large number of glue and press it to the surface (the convex side of the spoon out). It is necessary to cover the entire bottle in a circle until the entire perimeter is occupied by plastic "spoons". It is advisable to arrange them in a checkerboard pattern and slightly move them together. This will leave fewer "free spots".
4. You need to remove the cartridge from the old unnecessary chandelier, and then place it in an already glued and dried bottle and fix it on the frame.
5. A decorative bowl can also be made from plastic spoons: stick "scoops" around the neck of the eggplant.
6. Install and connect the chandelier, check its operation.

Note! The option of decorative painting or painting of spoons in absolutely any color is possible. Thus, your product will look even more beautiful and more original!

Chandelier made of plastic bottles in the form of leaves

Another unusual option a chandelier made in the form of leaves will serve in the interior. It is created from simple plastic bottles, the variety of colors of which allows you to work in the most unusual colors and embody the most daring ideas.

Process of creation:

1. Cut plastic bottles into blanks shaped like future leaves.
2. Each blank has to finally fix the shape of the sheet.
3. With a soldering iron with a thick tip and a one-sided bevel, you need to slightly fuse the sections of each leaf in order to give the future product the greatest effect.
4. In the same way, thanks to the soldering iron, you need to give the blanks a sheet structure. You need to act very carefully and accurately, because you can easily make a hole in the plastic. Such a leaf with outlined contours of veins and slightly fused edges will look complete.
5. With a hot needle at the "leg" of each leaf, you need to melt several holes in order to attach them.
6. Thanks to a thin wire, form branches and screw them to a steel wire frame.

It would also be a great idea to make new chandelier in the form of a ceiling lamp for a floor lamp or a lamp on the table. Thus, it will be a great addition to the previous product!

Chandelier with paper butterflies

The most common version of the product is a chandelier with butterflies. And this is no accident. To begin with, this option looks luxurious and expensive, and secondly, its manufacture does not require special physical costs. Thus, even a child can participate in the creation of a chandelier.

Process of creation:

1. The basis is either an old chandelier or a similar frame. If this is not available, then you can take the simplest wooden or metal rim. If there is no such material, then, as an option, you can take a thick wire and make about 2-3 skeins, so that a circle forms.
2. Cut paper butterflies according to the pattern. You need to take a butterfly template and fit it to the desired size. The option also looks very unusual when butterflies of several sizes are located on the chandelier at once (again, depending on desire). Transfer the outlines to paper and carefully cut out, preferably with a sharpened clerical knife, or small non-rounded scissors. The material for the templates themselves is better to use dense, not very dirty and does not attract dust. For example, velvet paper is very bad for a product, because in the future you will need to vacuum the chandelier quite often.
3. Take a thread from a nylon or a transparent fishing line and attach butterflies to it. You can attach it in two ways: either pierce the bodies of butterflies, or stick them on silicone glue.
4. Next, we attach threads with butterflies to the base of the frame and decorate it.
5. You can also try interesting option if you make a wire ball! It should be based on a suspension from a chandelier and place several butterfly patterns on it using a glue gun.

fabric chandelier

This chandelier is also based on the frame. As in the previous version, either old metal frames or dense wire are suitable for its manufacture.

After you have pre-prepared the base, proceed to cutting out the fabric from which the lampshade will be made in the future. How long will it be ready product, depends on your desire, however, it should be borne in mind that the width of the fabric must be the same as the diameter of the frame! Once you have finished the pattern, you need to try on.

Another nuance is that the top of the fabric will need to be sewn directly on the frame, which means that it (the frame) must be solid. Otherwise, if it is possible to thread it directly into the fabric, then you should first fold the upper edge of the pattern and stitch it, and then iron it. Then we sew a seam on the side of the product.

In order for the lampshade not to lose its shape, due attention should be paid to the material. If the fabric is too light, "airy", then the bottom of the product should be weighted. To do this, you can use cardboard or fishing line.

A neatly sewn fringe, lace or braid will also look beautiful. But do not "overload" the product! The process of making a fabric chandelier is similar to making a lace chandelier. So you can safely experiment with materials that are located on the frame.

Plafond of threads and a balloon

Materials:

• dense threads, such as woolen, cotton, or jute rope - at least 1 meter;
• cartridge;
• petrolatum;
• PVA glue;
• a brush to apply glue and petroleum jelly (it is desirable that the brush does not shed);
• 1 or 2 pieces of balloons (the first to work with it, and the second to check the finished product, if desired);

Process of creation:

1. Inflate the balloon to a certain size, secure. Remember that the finished work will exactly repeat the shape of the ball! With a marker, draw a couple of circles at the top and bottom, in order to determine the boundaries of winding threads.
2. Using a brush, smear the ball around the entire perimeter with petroleum jelly.
3. Pour PVA into a plastic container and thoroughly process the threads with it (It is not advisable to apply glue to the entire length of the threads at once! Treat them as you wind them around the ball!).
4. Given the borders that you applied with a marker, wind the threads around the ball. Do not forget that depending on the density with which you wind, the future appearance of the product depends.
5. After winding, you need to leave the product for a day until it dries completely; After complete drying, you need to burst the ball and remove it through the holes.
6. Cut a place at the top and insert the cartridge.
7. In order to be completely sure that the product turned out to be strong, you can insert a ball into it and inflate it. Similarly, you can check the flexibility and reliability of the lampshade.

Alternatively, you can paint the structure with a spray can or acrylic paint, attach all kinds of decorative ornaments such as butterflies, artificial flowers or beads. It's also a great idea to arrange a few balloons in the form of a bunch of grapes and fasten them together.

Wine bottle chandelier

This version of the chandelier is a little more complicated than the previous ones. Making a chandelier for this is quite difficult, the manufacturing process will require accuracy and care. However, you will love the result!

Materials:

• a bottle of wine;
• glass cutter;
• sandpaper for sanding edges;
• cartridge;
• electric wire;
• metallic or wooden frame, rim.

Process of creation:

1. First you need to prepare the bottle itself for further manipulations with it. The first step is to draw a straight line around the perimeter at the level you need. This is required in order to cut off the bottom of the bottle with a glass cutter;
2. In order not to cut yourself on the glass, you need to grind sharp edges sandpaper;
3. Pull the wire through the neck of the bottle and then connect the cartridge;
4. Attach the bottle to the frame.

You can also decorate the bottle with all sorts of decorative items or leave it in original form. In any case, it will look original and spectacular.

The number of products on the frame depends on your desire. You can either leave one bottle, or fix four or more bottles at once.

Chandelier idea from laserdiscs

This idea is great for those who have a large number of laser discs left in the house, and the hand does not rise to throw them away. It is immediately worth noting that the manufacturing options and the result can be very different. It all depends on your imagination and creativity!

Materials:

• two round wooden planks of different thicknesses, and which are slightly larger in diameter than the disks;
• racks made of metal or wood;
• Fluorescent Lamp;
• magnetic switch;
• disks.

Process of creation:

1. Make a hole in a board with a greater thickness and install a starter with a switch in it.
2. Then connect it all to the lamp.
3. String disks on the lamp.
4. Install the racks around the discs and secure the top.

The finished product will delight its owners for a long time, and it does not require special care. It is not advisable to place this type of chandelier in a children's room so that the child cannot harm himself (only if the chandelier hangs out of reach).

Shabby chic chandelier

To create spectacular lighting in the room, you can also make a chandelier from fabric or beads. The result is a kind of chandelier or ceiling in the style of "shabby chic".

Materials:

• a finished metal or wooden frame (or it can be made from an old hoop, garden basket, thick wire);
• cartridge and lamp;
• chains and threads for decoration;
• all kinds of beads and beads.

Working on such a ceiling is not difficult, but it is a very painstaking task. Such chandeliers usually consist of two or three levels of rings, which are located one above the other. It all depends on the size of the selected bases. If you take rings of the same diameter, then the finished product will be made in the Art Nouveau style.

One of the important points is that before you start decorating the chandelier, you need to paint and wrap the frames with decorative materials!

The approximate consumption of beads is:

• For the lower part of the lampshade - 16 mm beads, about 15-17 pieces per thread;
• For the upper part of the lampshade - 12 mm beads, about 35 pieces per strand.

Naturally, when stringing beads on a thread, you can increase or decrease their number or the degree of thread tension. But it is still desirable to stock up on materials in excess of the norm.

The essence of the work is to hang threads with beads "waterfall" or "cascade" so that they flow down the structure.

In order to make the effect of "muting" the light, you can sheathe the frame with a thick fabric.

A handmade chandelier will definitely bring a fresh touch, originality and beauty to the interior. You will immediately notice how the room will sparkle with new colors, and your guests will sincerely admire your creativity, diligence and original taste!

90 photos of DIY chandelier ideas

Lighting is the most important component of the interior. The coziness and comfort level of our home depends on the lighting. The play of light and shadow allows you to beat the winning moments of the interior and divert attention from bad moments. And also - lamps, floor lamps, chandeliers and lamps create the atmosphere that we call "home". Unique lamps will help to make a dwelling only “your own”, personal, individual, and the best way is to make a lampshade with your own hands. Homemade plafonds and lampshades are the thing that will make your home stand out from the rest.

A few words about security

In the manufacture of lamps, floor lamps and chandeliers in industrial environment the minimum distance from the "body" of the lamp to the materials is preliminarily calculated. This distance depends on the power and thermal radiation of the lamp and on the type (combustibility) of the material from which the ceiling / lampshade is made. At home, hardly anyone will bother with such calculations. And in order not to create a dangerous situation, it is worth adhering to certain rules.

And in general, having made a lampshade and installing it, in the first few days, pay attention to whether the ceiling heats up. Heating is any increase in temperature above environment. If the lampshade feels “warm”, change the light bulb to a less powerful one. Check again. So until the homemade lampshade warms up.

Where to get a frame

If you want to remake old lamp, a floor lamp, a sconce in which the old lampshade has become unusable, you can simply use the existing base by peeling old stuff. Before starting work, inspect the frame well, if there is rust or a damaged coating somewhere, maybe it’s worth stripping everything off and painting it again? At the same time, the color can be changed. If there are no old frames, you can buy an inexpensive lamp (in a store or at a flea market) and do the same operations with it. Good lampshades can, by the way, be made from waste baskets. They are wire, there are plastic. The main thing is to find a suitable shape and size. Then make a hole in the bottom for the cartridge. Further - it's up to decoration / plating, and here there are a lot of options.

If this method is also not available, you can make a lampshade without a frame (there are some) or make a frame yourself. The material for making a frame for a lampshade with your own hands is: wire, wood (wooden or bamboo sticks, specially cut elements), plastic bottles.

How to make a frame for a homemade wire lampshade

The wire for the lamp frame needs aluminum or steel. Aluminum is easy to work with, but wrinkle easily. This is not very important when the lampshade is already in use, but this fact must be taken into account during operation: you can ruin the shape. On the other hand, such plasticity allows easy and simple changes in the shape during operation. So that's a good option. Aluminum wire can be "mined" from electrical cables. You will have to remove the protective shell and you can use it.

Steel wire is more elastic, so it retains its shape well. It can be found in the construction market. It's harder to work with her. It is desirable that there were strong male hands nearby.

In addition to the wire, you will need powerful wire cutters and pliers to work. The frame of the lampshade usually consists of two rings and racks connecting them. The shape of the future lampshade depends on the size of the rings and the shape of the racks. Questions may arise regarding the number of racks and how they are attached. The number of posts depends on the size of the rings and how "round" you want the lampshade to be. The more posts, the more “smoothly” the fabric will lie. So it's up to you, but optimal distance between the uprights in the lower circle - about 5-6 cm.

Techniques for creating a frame for a wire lampshade

Methods for attaching the stack to the lampshade rings depend on the thickness and type of wire, as well as the tools you have. The easiest is to make a small hook at the end, then clamp it tightly. And so that the ring does not slide left and right, pre-treat the wire at the attachment point with sandpaper with a large grain. This is an option for thick aluminum wire. If the wire is steel, and with a diameter of 1.2-2 mm or more, the best way is. Thinner wire can be bent and wrapped around the ring or also made a hook.

If you make hooks, wind the wire, the appearance is far from being as ideal as that of factory frames. But this imperfection will be covered by the lampshade itself. If she still worries you, find a ribbon of a suitable color (usually matched to the color of the lampshade) and carefully wrap the resulting frame. It will get much better. The tape can be smeared with PVA glue and, wet, tightly, turn by turn, wrap the frame around.

wire mesh

If you can find a fine wire mesh, you can quickly make an almost perfect cylindrical ceiling for a floor lamp, table lamp, night lamp, lampshade for installing candles, etc. All you need is to cut off a piece of mesh of the desired length and width, roll it into a ring and fasten the wires by wrapping them around the racks.

To prevent the mesh from straightening when cutting off a piece, cut so that long free ends remain on both sides. They will fasten the ceiling of a cylindrical shape. And the imperfection of the upper and lower rings can be masked with a tape of the desired color.

From a five-liter plastic bottle

An interesting shape lampshade can be obtained from a large plastic bottle. There are bottles of 5-6 liters and even 10. Here they can be used. From the container we cut off the top or the bottom - depending on what you like best. In the cut off part we make a ring for the cartridge. If cut off top part, for some cartridges you can use the neck. For those with a larger diameter, it will have to be cut off.

Then we cut out the excess plastic, form the rims and racks of the ceiling. In order not to be mistaken, you can first draw all the lines with a marker. Cutting will be easier. Everything is elementary. Then we just decorate. And yes, it is necessary to cut the plastic, otherwise warm air there will be nowhere to go.

We make lampshades on the frame

There are enough options on how to make a lampshade cover:

From tapes

The easiest and fastest way to transform an old lampshade for a floor lamp or table lamp is to use ribbons. You need a frame or lampshade in the form of a cylinder. It can be "naked" or covered with fabric. If you use a "bare" frame, the light will break through the cracks, which will create interesting lighting effects, but the lighting will not be uniform. Reading in this light is inconvenient - this is an interior solution. If you need even lighting, cover the frame with fabric first. It can be the same color as the ribbon, a couple of tones darker or lighter, it can be contrasting. Everything depends on your desire. And remember that the darker the fabric, the less light the lampshade lets through.

We take a tape 1-2.5 cm wide. We fix it from the wrong side of the lampshade with PVA glue, additionally fixing it with a pin. If you took a wire frame without fabric, we attach it to the upper or lower rim (you can sew it on with your hands, you can use glue). Then we begin to wrap the entire frame, from top to bottom, placing the turns of the tape close to each other, but without overlap.

Having finished the circle, we unfold the tape 90 °. We fix it in this position (with a needle and thread or PVA glue, glue from a gun, temporarily fixing it with a pin, pressing it with a clothespin). Then we skip the tape under the first tape, pull it out, lay it on top of the second one, then pull it down again, pull it up through one tape. So, gradually, we create an interlacing, filling the entire lampshade.

Alternatively, you can skip two vertical tapes. But then you need to make sure that each next row moves one crossbar. Then you get a different type of weave. Such a lampshade is ideal for floor lamps, since it will direct the light downwards, scattering through the walls will be small.

In this version, the ribbons can be the same, they can be of the same color, but of a different texture, they can differ by a couple of tones or be contrasting. In a circle, the tapes can be started all the way, or you can - after a certain distance. If you find a wide tape and apply it with an overlap, then horizontal ones will not be needed at all. And if you use a braided or twisted cord (in the lower photo on the right), we get a completely different lampshade in appearance. So only this technique of finishing the lampshade gives a lot of options.

Let's briefly present the ideas. There are many options for how you can design standard frames for lampshades in a non-standard way. The first method has already been voiced: you can knit a lampshade cover on knitting needles or crochet. Several options in the photo.

Not everyone knows how to knit. It is easier to work with beads, especially if you glue them. You can decorate an old fabric with beads, sequins, beads of various shapes and sizes. You can make such a “new-old” lampshade with your own hands in a couple of hours. You select the decorations that match the color, coat the fabric with PVA glue, stick the decorations. To complete the look, you can assemble pendants from beads and beads that are attached to the lower rim, but this is already painstaking work. Although the effect is interesting.

Can be sewn new lampshade from fabric. But it is not necessary to make it an updated copy of the old one. Fantasy must be turned on! If the lamp or floor lamp is in the girls' room, a new cover for the lampshade can be made in the form of a skirt. The style of the skirt is up to you. Interesting look in the fold. With and without ruffles.

In the boy's room, you can use an old geographical map. They are on thick paper. If the paper is not thick enough, first you need to stick the card on cardboard, and then glue the lampshade from such a blank.

Original shades are obtained if finished frame braid with threads or ropes. Ropes can be natural. In this case, they are gray, brown beige. You can find thin synthetic colored cords. Of these, more "fun" in color products will turn out. The situation is even simpler with knitting threads. They are thin, thick, textured, with a smoothly changing color. In general, there are a lot of options.

We take the frame and braid it according to a certain pattern. You can start with racks. Braid each rack with a pigtail (the length of the threads should be 3 times the height of the rack). When this work is finished, we begin to stretch the threads / ropes between the racks. They will need to be passed through pigtails, so it is more convenient to do this with threads with a needle, and the ropes can be pushed through like that.

The second option is to first entangle the entire frame horizontally, and then braid the racks. A pigtail will no longer work here, you just need to fix the turns on the rack with oblique stitches with a certain slope. This version is somewhat simpler in execution, but the “pigtails” look more decorative.

Homemade ceiling lamps without a frame

Many materials are rigid enough to hold their shape on their own, yet malleable enough to be made into something interesting. There are a lot of such homemade lampshades. And almost all of them are worth your attention. We give here only a part, the other part will go in the photo section (see below).

From knitted lace doilies

Many people have crocheted napkins and they lie in the “stash”, because it’s a pity to throw it away and they don’t know how to use it. There is a very interesting idea - to make a lampshade for a hanging chandelier out of them. In addition to napkins, you will need a large balloon or an inflatable ball, glue for heavy wallpaper (vinyl, silkscreen, etc.), a brush.

We soak the glue according to the instructions, wait until it swells. Inflate a balloon or take a ball, hang it up. When the glue is ready, lay out a napkin on some clean surface, coat it with glue, put it on a ball.

It is necessary to lay out with such a condition that in the center there will be a hole for the cartridge. Glue the napkins one by one. They need to be laid out so that the edges overlap slightly. When all the napkins are laid, once again coat them with glue and leave to dry. When the glue is dry, blow off the ball or ball (the ball can be pierced if you don't mind) and take it out through the hole. That's all, the lace lampshade is ready.

In some cases, there are problems with how to hang the finished lampshade on the cartridge. The problem is solved simply - take a transparent plastic bottle, cut off its neck, if necessary, expand the hole to the desired size (so that it fits tightly on the cartridge), then cut off the plastic so that you get a ring 5-7 cm wide. Lubricate this ring with PVA glue , and glue it to the lampshade from the inside of the ball.

Round plafonds made of threads

Almost the same technology can be used to make round and semicircular stylish shades. Choose the thread of the right color. Their composition is absolutely unimportant - the color, thickness and texture are important. They can be shaggy, smooth, twisted, thinner and thicker. It depends on the appearance. It is most convenient to work with cotton threads of medium thickness. They absorb glue well and then, after drying, keep their shape perfectly.

You will also need a ball or ball. This will be the base of the lampshade, which sets the shape. Choose the size of the base as you wish. The threads will need to be glued, for this you need PVA glue. It is poured into a container, diluted with water in a ratio of 1: 1.

You can use other glue. It is important that it becomes transparent after drying. These are WB-29 from TYTAN Professional and D2 joinery adhesive. If you use any of these types of glue, read the instructions.

On the ball or ball, draw a circle, which will be slightly smaller in size than the lamp socket. On the opposite side, draw a larger circle - this will be the lower edge of the ceiling. Now everything is ready, we can start.

We coat the threads with glue and wind them around the ball in a chaotic manner. It is more convenient to do this if the glue is poured into a container - you can lower the entire skein there, and just pull the thread slowly. With glue in a tube, everything is not so comfortable: you have to coat sections up to a meter long, rewind, coat again. Time goes much longer. This is if you do not use PVA. But on the other hand, the products turn out to be more rigid and do not sag, do not change shape over time, as can happen with filament lampshades on PVA.

When winding threads around the ball, we carefully go around the drawn circles. If you accidentally climbed into the "forbidden territory", we simply move the threads, forming an even (more or less even) edge. When the threads run out or you decide that there is enough density, the process can be stopped. We fill the edge of the thread between others. All. Then we coat the ball with wound threads again with glue (PVA can be watered) and leave to dry (at least 2 days). To prevent the ball from rolling, we find a bowl or pan and use it as a stand.

The last stage is to blow off the ball or ball. If the ball has a nipple, press it with a thin wire, releasing air. Take out the dropped ball. That's all, you can thread the lamp inside and test the lampshade.

The technology is the same, but the appearance is very different…

According to the technology described above, it is possible to make not only round shades. Rectangular, triangular, trapezoidal. Choose a base that is easy to remove, wind threads soaked in glue, braid, even sticks, newspaper tubes etc. After drying, remove the base and, behold, you have made a lampshade with your own hands. A couple of examples in the photo below.

You can also use chopsticks... Just wrap the ball too cling film and use not PVA glue, but transparent carpentry

It's pasty polymer clay in a tube, which was applied to a milk bag, then dried and the bag was removed ...

Creative homemade shades for lamps, floor lamps and chandeliers

You just wonder what people don’t make beautiful and unusual things from. Plafond from a cup, grater, bottle, beer or glass can, metal parts and beer can rings ... It seems that everything can be used ...

Do you have old slides and cameras? Do unique lamp for the photographer!

Candlesticks turn into lamps ... without lampshades

You can’t tell in life, but these shades are made of hooks used to open metal cans for drinks and canned food… if they are painted, it will be even more interesting

Don't know what to do with grandma's crystal? Make plafonds out of it ...

Recycling from improvised items and materials! Below are some fabulous ideas that turn the unnecessary into show decor - get inspired!

1. Why not start with some great natural inspiration? A trendy rustic touch, this tree branch pendant light is pretty easy to make and you don't need anything fancy to make it. It has a certain Scandinavian minimalism, you can leave the tree trunk natural or paint it white and here you can of course improvise to create different versions of it. It may be quite simple, but it is quite interesting to watch how a branch turns into a beautiful lamp!

2. Whether it's soda or beer, feel free to use tabs (rings, keys - they are called differently) from empty cans of any canned drinks of your choice. There may be other soda ring lights in a similar style, this project is different due to the placement of the rings diagonally. It's really cool and gives shine to the interior during the day, and when darkness sets in, the sparkling tongues of light flicker slightly visually.

3. DIY sheet metal pendant lamp. These metal sheets commonly used to cover the radiator. It's amazing to use them to create a sophisticated lamp, for example, for a bedroom, to add an industrial charm with a metallic touch. You can paint such a grid in gold - and the lamp will turn into a glamorous decoration. Even if you don't have one of these sheets in stock (or in your garage), you should be able to easily get a pair from the hardware store. Remember, the more intricate cutouts will be on the sheets, the more beautiful the metal lamp will turn out. It remains to add a few washers, screws and a lighting kit, a little diligence and an amazing design project will be ready.

4. Tin Pendant Light. Everything ingenious is simple - sometimes it is striking how simple and unnecessary, and at the same time, a thing can be very impressive if it is hung over a kitchen island or dining table! Try to use large cans, which may have been lying in the attic for a long time. Turn these giant metal cylinders into a beautiful drum pendant with just a little paint. Simple, effective and hardly time-consuming option!

5. Hanging lamp from a cutlery holder. Why not go further into the Industrial style and try out the next pendant light? Easily transform an old fork and spoon holder into a light fixture with a simple bulb string and spray paint of your choice. Inspired by IKEA, the creator of this dainty light pendant opted for orange. You can even change the color of the light with the changing seasons and trends, and then it will always be relevant!

6. Hanging lamp made from recycled cardboard. There are many ways in which you can reuse old cardboard racks and here is another innovative one. A simple homemade modern version - an open lantern made of cardboard, add some bright colours, use the electric light kit, hang it on the rafters and voila!

7. Light - Exhaust Fan. It's hard to imagine that the lighting in this kitchen is made from once-discarded waste. But one man's trash is another man's treasure! The design idea is a great example of how you can find inspiration for creating a DIY lamp in the most unexpected places. Simply outstanding!

8. Retro lamp from an old fan. An unnecessary metal frame from an old fan is planning to wallow and rust in the garage? It can be used to make a stunning industrial pendant light. Try adding some bright colors and it will become the retro focal point in the room. Large and extravagant lamps can be a design hit even in a cool modern style. If you want more industrial chic, then go for steel and gray finishes.

9. Vintage pendant lamp made from old tin molds for baking cake or cupcake. These are really capable of bringing a smile to your face! Small, very cute and colored wires on top give them a stylish charm. Of course, you can experiment with large lamp shapes and different style. If you need a mini-lamp in the interior - then tin molds as interior lights are ideal option lamp for you.

10. Globe pendant lamp. Let the whole world shed light on your desktop! The picture pretty much says here how it can be done. Take an old globe, an electric lamp kit and do it yourself fashion lamp for study, desktop lighting or home office. The simplicity of this project is certainly its great merit.

11. Pendant lamp made of enameled colander. If cake pans can be turned into a lamp, then why not use an enameled colander? If you haven't used one of these in a while and they're just stuck in the closet forever, this is a great way to add some personal touches to the kitchen. And if you don't have one on hand, you can use a giant bowl or salad bowl as an alternative. We are all about resourcefulness in design creativity!

12 Paper cutting lamp. Using recycled paper, a simple, boring old lantern has been transformed into a stylish interior piece of art by designer Gabriel Guy. You can make your own paper cut lamp, I'm sure your little ones will be happy to help with the shredding!

13 Hanging lamp made of flowers. Of course, a lampshade, a chandelier or a lamp made of fresh flowers is a short-lived thing and quite expensive for many, unless, of course, you can boast of a chic private garden outside the window of your house. But on a big occasion and on the eve of a family holiday or a long-awaited meeting with friends, you can get confused. Take a big wire and a metal frame or wicker basket, add some gorgeous fresh flowers in dazzling scarlet and red, plus some green filler and you're all set for some original and sophisticated lighting fixtures for your New Year's Eve party! Just change the flowers with the season and you have a unique living chandelier for every special occasion. With fresh flowers and natural greenery, it's hard to go wrong! If there is no opportunity and desire to work for decoration for two days, then choose the most beautiful artificial flowers or those that have been gathering dust on the shelf for a long time and no longer attract the eye.

Glittering Sphere Magic

Pure and clear certain forms, rectangles and squares are all too often the dominant shapes that surround us. Good old spheres are the perfect way to create organic objects of close attention in a world dominated by straight lines. Some of the ideas for homemade pendant lights draw inspiration from IKEA home furnishings - a real anthropology for inspiration. So why splurge when you can make one of these dazzling DIY lights at home?

14. Stunning thread lamp. This pendant light looks like a gorgeous full moon - check it out! perfect idea for those who love modern design. The basis for this needlework is an inflatable rubber ball, on which yarn or a thin rope is randomly wound, then it is hardened with a special solution or starch mixture. The ball is deflated and removed through the cut hole and voila - a chic ball for the lampshade is ready! More details on the site Art-Empire.rf.

15. Lamp White Paper Petal. All you need here is an old round lamp and cut free-form paper flowers for decoration, which we stick on the surface of the old lamp. For a lampshade, you can use a paper lantern or an IKEA paper ball lampshade as a base. Just stick them like this until you're happy with the look. A large lamp, like this one, is decorated with almost 200 paper flowers!

16. Lamp made of plastic bags. And although it takes quite a lot of work, the result is worth the effort. Use quality plastic bags for best results. The photo light is made of translucent plastic bags in black, you can mix and match various colors for various visual and decorative effects.

17. Giant pendant lamp from the map. Are you not a big fan of viewing all these maps in the atlas and have been using a navigator on the roads for a long time? Why not put them to better use and use roadmaps to make an original pendant light. You will need to cut out the cards and the ability to fold them into a given shape, then we will start gluing. One of the interesting aspects of this lamp is to consider it when the light is turned on.

18. Large faceted paper lamp. You can go the more traditional route by simply using the normal white paper for printing, instead of a map, as in the example above. This flawless look can be difficult to maintain with interior details, but this option can come in handy as wedding decor, kids birthday decorations, or even as a big spotlight at your next weekend party.

19. Hanging lamp made of yarn. Some colorful leftover yarn, corn starch and a balloon is all you need to make this DIY lamp. Wrap starch-dipped yarn around an inflated balloon and get the pendant light you need. Let the yarn dry overnight and use spray polish to complete the look. When winter is knocking on the door, cozy decorations like a warm and fluffy addition.

20. Bamboo Ball! Inspired by the famous Cassiopeia chandelier, this bamboo ball light is made from the bamboo material of old Roman blinds. The artistic look of this light fixture adds sophistication in a subtle and elegant style. Since the bamboo strips were sourced from an old curtain, you don't have to worry about cutting and sorting too much.

21. Lamp Ombre. Turning a soft white glass shade into something more original is not an insurmountable obstacle. This project is an excellent way to add color accent to a neutral room. A touch of glass paints, which we rub lightly with alcohol, and a little patience are all it takes to create these colorful wonders. Don't be in a rush to apply too much spray paint to create the gorgeous color gradient you see here.

22. Lamp with pom-poms. These colorful and fluffy pendant lights are an amazing addition to a child's room. Textured and contrasting, they exude warmth along with the visual effect, which makes it truly special. Crafting yarn for pom-poms will take you several hours. Just turn on your favorite TV shows over the weekend and start some fun crafting for your home!

23. Light lamp from wooden rings. We need hoops. Ball-shaped lamps look stylish and really look fashionable. This lamp is made of two hoops with a diameter of about 35 cm. It has a beautiful antique look. Just make sure you can drill holes for the rings and most of the work will be done.

24. Perforated Globe - pendant lamp made from plastic bowls. We all have moments of inspiration, but most of us are too lazy or too busy to go back and work on our idea. The creator of this handmade project was inspired by a $160 pendant light and realized the idea of ​​a perforated globe in a fraction of his free time, making a pendant light out of two plastic bowls.

25. Wire lamp. Once again, this is probably the easiest of the handmade projects that plays with color and outline to create a great shape. Grab some galvanized steel wire, some good old-fashioned spray paint, and start making these awesome hoops. We love their minimalistic and vibrant look!

26. DIY veneer lamp. If the idea of ​​a bamboo lamp didn't inspire you, but a hoop lamp seems to be a problem, woven veneer lamps are waiting for you. If you are renovating or building a holiday home, you will most likely have a lot of wood veneer on the strip to save money. It is enough to glue them together and add a minimum of watts - you will get a stunning stylish handmade lamp.

Dynamic design and visual contrast. AT modern design tend to use neutral hues and monotonous textures way too often. Let's try to bring some color and extraordinary texture into the interiors with pendant lamps ranging from floating clouds to a fuchsia cube! These designs add accents of brightness, and they also aim to instantly add geometric and textural contrast.

27. 3-D Shadows. The color, design and simplicity of this geometric luminaire surprises every time we look at it. twelve sticks of cork tree and glittery neon yarn in the color of your choice is all you need to make this fun project a reality. Fuchsia is definitely one of the trendy modern colors. One day you can just change it to turquoise!

28. Hanging lamp from a metal basket. Metal wire is a wonderful way to bring industrial design into a room. The solution is an old wire basket, some black paint and a hanging lamp looks ingenious and impressive!

29. Cloud of light. Divine is the only word for these inspired lamps. Just use some cotton and some paper lanterns to recreate the heavenly aura of these lights. But always use ultra-cool light and efficient LED bulbs that don't get hot. Hang a few of these lights together and they can almost make you believe you're floating among the clouds!

30. Lamp Dodecahedron. For those who are not in the know, a small educational program ..) Dodecasdr is one of the five possible regular polyhedra, which is composed of twelve regular pentagons, which are its faces. Another one of those awesome DIY projects inspired by expensive retail versions - this time, it's the Dustin Lamp by Ralph Lauren. Lamp Dodecahedron

requires very precise wood cutting. And then just spray on some black paint and you won't even notice any difference from the famous designer's $500 sample!

Note. About the dodecahedron, Plato wrote that "... his god determined for the Universe and resorted to him as a model."

31. Industrial lamps. Brilliant, sophisticated and chic, this trio grabs your attention in an understated way. It almost resembles the lights of an old factory and can add some nostalgic charm. Bring back the good old days!

32. Lamp - a pack of tulle. Time to bring your sewing skills to interior design! Definitely a must have lamp for those who have a little charming princess in their house. You can add it to your bedroom or kids room with a princess theme.

33. The Quilt Light, designed by Tamara Maines, was unveiled at Milan Design Week 2012. You can fold a similar shape out of thick cardboard without special skills, circling all the edges with bright paint and feel the happiness of a real design process.

34. Vintage cubic openwork. It is hard to believe that these lamps are handmade. Openwork cube pendant light adds a lot of visual, textural and geometric touches to any modern room which he certainly embellishes.

Wood and open structure. The open design of a chandelier or pendant lamp fits perfectly into the interior of even a small room where it will not look overwhelming. Even if you haven't worked with wood before, try to take the first step and create one of your own. wooden lamps- free up the next weekend for new needlework and try to master interesting creativity with a tree.

35. Lamp in the style of a country house. You can turn an old lamp holder into a stylish lamp kitchen utensils or a basket, turn it upside down, add a honeycomb base and get an amazing job. Those who have an old, rectangular bird cage can use this as well. With a light rustic look, it's perfect for a rustic or country house interior.

36. Suspended industrial lamp. Intricately curved thin metal tubes are painted in gold and the base for the cartridge is made of cement mixture- everything that he is and at the same time looks just amazing! The light wire can be used from any of your old pendant lights. You can also create completely new design at your discretion. If there is a problem with aluminum tube, then feel free to use old wire hangers.

37. Neo-Baroque pendant lamp in Honeysuckle color. Sophisticated, impressive classic shapes - you can't just turn your eyes away from it. Use the most thin plywood, veneer, or most simply heavy cardboard plus a can of unexpectedly bright paint and you can create an impressive piece of art for an eclectic living space.

And again processing. Let's return to the ideas of design and creativity with our own hands from improvised materials. We often store items for a long time in the hope that they may be needed in the future - perhaps this is the case! It's time to audit the clogged pantry and find a more useful destination for the forgotten items awaiting their high point.

38. Lamp made of woven rope. Here is another example of creating a warm natural texture in an urban setting dominated by glass, concrete and stone. Organic and soothing, this pendant light was handcrafted using a hanging planter basket and sisal rope.

39. Lamp made of glass. Working with glass requires focus and skill, but glass pendant lights always look much more attractive than any other design. Try experimenting a bit beforehand and use glass that has some distortion to create interesting light patterns on the wall. Wrap colorful neon wires, let them wrap around electric wire and let the magic begin.

40. Lamp-lantern from wine bottle. We are not only talking about the design of everyday interiors, because your favorite holidays are just around the corner. A lantern in the form of a wine bottle will add mystery and elegance almost instantly, even in outer space. Such a magic lantern will decorate dreamy evenings in a country house and beautiful nights under the stars!

41. And again the lights from the wine bottle. Or maybe this time you decide, in addition to the table, to decorate the ceiling with a lot of lamps from wine or champagne bottles - what is not the perfect decoration for a long-awaited celebration or New Year's Eve! If before that the base was cut off from the bottle, then in this version they are recommended to be cut off just below the neck. Install them at different heights for a more theatrical performance.

42. Fabric garland lamp. Remember above we already looked at the paper cut pendant lamp? This one looks like a textile version with a hint of Hollywood glam. You can vary the size of the beam - in order to create a small lampshade or a large flowing chandelier that hangs majestically over the dining table. Sharpen up the design a bit by mixing darker fabrics in some rows to create an interesting pattern.

43. Ping Pong lamp. As you can see, handmade projects are not only for girls and zealous sports fans can also join us. So, ping-pong may not be your favorite game, but the idea of ​​​​creating a similar lampshade for a chandelier, a floor lamp or a tennis ball lamp looks very tempting. Use a ready-made metal frame or make your own. Also, the balls can be glued together in a ring or strung on a strong thread or thin wire. From above, all this is sprayed from a spray can of paint to create rainbow colors.

44. Pendants from Of stainless steel. These bright metal lanterns look lovely - inexpensive cutlery from IKEA has been transformed into beautiful lamps.

45. Rope hanging lamp. Use sisal or hemp rope to enhance the look of an unwanted frame from an old pendant light or sconce. To top it off, add decor with some crystal glitter to breathe life into it.

46. ​​Lamp made of plastic bottles and spoons. Yes, this warm and cozy chandelier is just a big bottle and white plastic spoons put together. This is one of those handmade fixtures where economical LED light bulbs that emit minimal heat are a must. Recycled bottles, plastic and LED lightening is an ECO-friendly project that decorates the design of your space, improves the mood and the ecology of the environment.

Sooner or later, the moment comes when the homeowner is firmly convinced that the interior of his apartment needs to be adjusted and certain changes will be made to diversify it and place the necessary accents. What, in your opinion, is the most successful interior detail in terms of decorative and functional indicators? Undoubtedly, these are original lighting fixtures. You can do this by organizing proper lighting room, setting the tone for the entire interior, an integral element of which are shades for lighting fixtures. It is they who, being central element interior, give the room originality, and lighting - unusual. If you have not carried out repairs in the room for a long time and have not planned the budget, including the cost of lighting fixtures, you can make ceiling lamps for the chandelier yourself. To do this, it is enough to develop the concept of the interior, choose the design of the lamp and make it with your own hands from improvised materials. And so that you can carry out your plans as efficiently as possible, in our article we will tell you how to make a ceiling lamp for a chandelier with your own hands.

Do-it-yourself chandelier shades: a variety of ideas and materials

At all times, things made by one's own hands were valued. They will not only original decoration interior, but also the best souvenir for your friends, acquaintances and relatives. What will be required to create a lamp? The basis of any handmade product is an original idea. If you have already decided on the concept of a future product, it is enough for you to make an original frame for a chandelier and stock up on materials at hand, using which you can realize your ideas. Fortunately, there are enough such materials. As a decor for a future exclusive product, you can use the most unexpected materials:

• woolen threads;
• wire;
• Balloons;
• lace;
• molds for cupcakes;
• paper;
• wine bottles;
• glass jars and many other improvised materials.

If you encounter difficulties when choosing fixtures, you cannot choose a chandelier shade that matches the style of the interior, or you have found the model you need, but its cost exceeds the cost of a crystal chandelier, we offer you a selection of step-by-step instructions for making designer lamps. As you can see, there are enough original ideas, and if you wondered: “How to update the ceiling lamps on the chandelier with your own hands?”, We advise you to adopt the ideas proposed by our experts.

Plafond for a chandelier made of wine bottles

To start implementing some ideas, only desire is enough. A person who has firmly decided to implement his plan, without fear, crosses the boundaries of the unknown and successfully implements his plan. If you have no experience in building a frame for lighting fixtures, but you really want to do it yourself, you will need a sufficient amount of information, which you can find in our article. Below you will find step-by-step instructions for creating designer chandelier shades that were made by ordinary people who previously had no idea how to make them from improvised, at first glance, unnecessary materials.

So, let's look at how to make a ceiling lamp for a chandelier from wine bottles.

• The first step involves trimming the bottom of the bottle. To do this, you need to draw a straight line on the bottle. It will be required in order to cut off the bottom of the bottle using a glass cutter;
• In order not to subsequently injure your hands with cut glass, grind the sharp edges with sandpaper;
• Pull the wire through the neck of the bottle. After it is inside, connect the cartridge and lamp;
• Choose a base for mounting and connect the bottles to the selected frame;
• You can decorate the bottle with different materials or leave it as is;
• The number of bottles taken for a chandelier is variable and can range from one to five to seven or more bottles.

Do-it-yourself ceiling lamp for a chandelier made of threads and balloons

The simplest lamp can be made from threads. The instructions for making such a lamp are so simple that even a child can handle it.

• Threads. It can be ordinary jute twine or thick cotton threads, the total length of which is no more than 100 meters. Color selection is carried out taking into account your taste preferences and the color concept of the interior;
• PVA glue and a brush, using which you will apply it;
• 2 balloons. You will need one of them for work, and the second for testing. It is recommended to use a round ball, which will provide correct form lamp;
• Petrolatum.

To make a lamp from threads, follow the step-by-step instructions below:

• The balloon is inflated to the correct size. It is important to remember that the finished thread lampshade will repeat the shape of the ball. Using a marker, draw one or two circles (top and bottom). In this case, the circumference below can be larger. They are necessary in order to delimit the area of ​​​​winding threads;
• PVA glue is poured into a container and the threads are carefully processed. Using a brush, coat the ball with Vaseline.

Important! Do not apply glue along the entire length of the thread. Lubrication is best done as it is wound.

• Taking into account the holes obtained after you drew two circles on the ball, wind the threads. Please note that the appearance of your future lampshade depends on the winding density;
• After you have wrapped the ball, leave the future chandelier for at least 24 hours until completely dry;
• After the ceiling of the threads has dried, the ball bursts, and its remains are removed from the lampshade that has become durable. The result of this work is a lampshade made of solid threads;
• A hole is cut in the upper part of the ball for the cartridge;
• Finally, check the strength of the lampshade. To do this, insert another ball into it and inflate it. With this technique, you can appreciate the flexibility of the design.

Having made several lamps in accordance with the presented step by step instructions, you can install local lighting in the kitchen or hang a thread lamp in the dining area.

Important! As additional decor chandeliers, you can use the original coloring, artificial flowers or butterflies, beads. A non-standard idea would be to make several balls that are fastened in such a way that they resemble a bunch of grapes.

Using the considered principle of making lamps, you can create original ceiling lamps decorated with lace.

Do-it-yourself plafond for a chandelier photo

Shabby chic chandelier shade

You can create spectacular room lighting by making a lamp out of fabric or beads. The result of your work will be a chandelier-chandelier or lamp in the style of shabby chic.

For this you will need the following materials:

• Wire, hanging planter from metal, an old hoop or a garden basket, from which you can make a frame;
• Cartridge with a lamp;
• Decorative chains and strong threads;
• Various beads and seed beads.

The plafond, made according to the technology discussed below, is a two- or three-level structure of several rings, which are located one above the other and connected by wire or chains. Depending on the size of the rings you choose, the style in which your ceiling will be executed will depend. If you take rings of different sizes, you can create a ceiling in the style of vintage classics, and by giving preference to rings of the same size, you can become the owner of a lamp in modern style.

Important! Before proceeding with the decorative design of the lamp, which involves stringing beads, color and wind the frame with decorative materials.

Consider the consumption of beads in the process of implementing this project:

• In the process of making the lower part of the lampshade, you will need beads with a diameter of 16 mm in the amount of 15 pieces per thread;
• In the process of making the upper part, you will need beads with a diameter of 12 mm from a consumption of 31-32 pieces per thread.
• By stringing beads on a thread, you can vary the number of threads and the degree of their tension.

Similarly to the described method, you can make a lampshade for a chandelier from artificial fruits. To create the effect of subdued lighting, it is necessary to use a dense fabric for covering the frame. A lampshade made using this technique will become an original addition to a country or Provence style kitchen.

Plafonds for chandeliers in the style of minimalism

The plafond for a chandelier made of plastic cans or bottles becomes one of the most original lampshades made from waste materials. By making a ceiling lamp in this way, you are betting not only on beauty and cheapness, but also on environmental friendliness.

Due to the fact that the manufacture of such a chandelier shade does not require additional decorations, such as beads or threads, it will be made in the style of hi-tech or minimalism, and you will not face the question: “How to decorate the chandelier shade with your own hands?” . In order to make such a ceiling, which will become the main element of the subdued lighting of the room, you only need colored or matte white plastic.

To make it, you will need the following materials:

• Base from a 5 liter plastic bottle;
• A large number of disposable spoons;
• Cartridge with lamp and wire;
• Glue necessary for the implementation of high-quality fixation of the elements of the product;

To make a lamp from plastic materials in a minimalist style, you need to cut off the bottom of a plastic bottle, and the handles of plastic spoons, and this must be done in such a way that they have a small stalk. Using glue, fix the cut spoons on the bottle that acts as the base. To achieve the greatest attractiveness and organicity of a homemade lampshade, arrange them in an orderly manner, in rows. Each next row must be overlapped, leaving no gaps that can spoil the appearance of the lampshade.

When the chandelier is ready, you will notice that it resembles fish scales. At the same time, it is important to remember that the design of the ceiling is characterized by a sufficiently high density, and therefore, the lighting will become so dim that, most likely, you will need to place additional lamps in the room.

The shape of the lamp may be different. One option involves a lamp in the shape of a lotus. However, other equally original decorations can be made from plastic spoons.

Another option for lighting fixtures made, one might say, from waste, is a ceiling lamp for a chandelier made from the bottoms of plastic bottles. It will appear lacy and, at first glance, consist of many small flowers.

Important! The lampshade made of plastic bottles can be not only white, but also colored - therefore, you will need to choose colored bottles or paint the finished product in the desired color: from gold, copper and steel to pink and black. If you hang a finished lampshade in the kitchen above the table, it will be a great addition to the dining area.

A variety of ideas for decorating do-it-yourself chandelier shades

How to dim the light in the room?

One of the “tools” for creating an intimate atmosphere in a room is the organization of subdued lighting, and the main way to implement this idea is lampshades, which first appeared more than two hundred years ago and replaced their predecessors - dampers for candles and torches. If earlier they were made only of fabric, today the use of crystal and broken glass is common for their decoration. Today, design art has reached its apogee of development, as a result of which the decorative design of hand-made products can be carried out using almost any materials.

Important! Today, the designer in the course of his work is not limited in the choice of materials for decoration - in the process of making lampshades, he can use any details. At the same time, it is important to maintain a sense of proportion and taste, creating harmonious combinations decorative elements.

A cozy lampshade, decorated with hand knitting, will become the best gift mother or grandmother.

Original lampshades for handmade sconces

Sconces are multifunctional wall lamps. Thanks to the diffused and subdued light they create, they can be placed in recreation areas and not be afraid for your eyesight. Today, there are modern sconces that involve regulating the flow of light into the room. Such models must be installed in rooms during the operation of which it is necessary to change the direction of light flows. If you want to become the owner of designer, unusual bras, create them yourself. Self-made wall lamps, in the process of creating which you can show your individuality, will most successfully fit into the holistic concept of the interior of your room.

Branch sconces are distinguished not only by fast and simple manufacturing but also original appearance.

The style of do-it-yourself ceiling lamps can be different and depends on the stylistic concept of the interior in which you plan to place them. In this regard, we can safely say that the answer to the question: “How to paint the chandelier shades with your own hands?” strictly individual.

If you complement the interior of the children's room with sconces, you can diversify the room, making it bright and perky. By hanging a sconce in the bedroom, you will make it more comfortable, bringing a touch of peace. Dinner in the kitchen, decorated with sconces, will become more romantic.

The baby's room can be decorated with a sconce in the shape of a birdhouse. To do this, it is enough to fix the birdhouse on the wall and bring a lamp with a ceiling into the middle.

DIY decorative LED lamps

Due to the growing popularity of LED lamps, they are used not only in work, but also in domestic premises. One of the advantages of LED lamps is the possibility of making them yourself. To make an LED design at home, you will need separate LEDs that are installed in the housing of a faulty lamp equipped with a power supply.

To replace a traditional incandescent lamp with an LED one, you do not need to dismantle the lamp or make adjustments to its design. Self-made LED lamps are most often part of decorative lighting, more often - the central element of ceiling lighting.

For the manufacture of stylish LED lamps, you can use a variety of materials:

• metal;
• the cloth;
• beads;
• LED Strip Light;
• old lamps.

Variety of LED lamps

Fabric LED lights can be used for decorative design premises and even clothes shown at fashion shows. The use of LEDs allows you to place the necessary accents on your tapestry.

This DIY beaded LED lamp will become a work of art, eye-catching and enthralling. From beads you can make both small table lamps and large-scale decorative panels from beads with illumination.

If you plan to use a handmade lamp as a decorative detail in interior design in classical style, in the process of its manufacture, it is recommended to use metal elements for the base.

The procedure for manufacturing an LED lamp from an LED strip

The LED strip is a flexible board with built-in LEDs and current-limiting resistors. To make a lamp, you can cut a section of tape to the required length. The supply wires are soldered to the contact pads located next to the cut lines. On the reverse side The board is covered with an adhesive film. To cut the tape, you can use ordinary scissors.

As a housing for a homemade lamp, you can use an old, used lamp.

The procedure for manufacturing an LED lamp from an old lamp is not difficult.

Disassemble the old lamp by gluing on it inner surface LED strip. The printed circuit board removed from the old lamp can be used as a power supply for the new lamp. The instruction for the manufacture of the lamp, presented in our article, involves the use of a transformerless power supply equipped with a ballast capacitor.

A lamp made in accordance with the presented scheme is suitable for illuminating the work area.

Having made a selection of circuit elements, place them on the board. In this case, unnecessary parts from the old lamp must be removed. After that, connect the tape to the power supply, assemble the lamp and connect it to the network.

LED lights are more relevant than ever. They can become both the central lighting element of the room, and its decorative component. After reviewing our article, you are convinced that making lamps with your own hands is a fairly simple and, at the same time, creative event, and as for the application homemade lamps then you can find it yourself.