Plaster flower panel on the wall. How to make a decorative gypsum panel yourself? Decorative finishing of gypsum panels

Home is the place where you want to feel as comfortable as possible. There is various ways make it even more comfortable. But it is especially nice when the decor elements are made by hand. Decorative panels in the interior always attract admiring glances, and making them from improvised materials is not difficult if you follow the technology correctly and follow the instructions step by step.

What it is

The panel is an element of decor and its purpose is to decorate the interior and fill the empty space on the walls or ceiling. Sounds very similar to the description of the painting, doesn't it? How does it differ from the picture, if both decor options are designed to decorate the room? The answer is simple: the picture is the subject of the art of painting, and the panel can consist of anything. Dough, plastic, gypsum, beads, fabric, wood - there is no limit to fantasy when it comes to making panels and the material for decoration can be anything. If you want to make your interior unique, then the panel will do just fine!

Scope of work

The first step in creating wall panel- Decide on the design of the future product. If you already know where it will be located, then this complicates the task. We need to weigh color solution, dimensions, what it will have, whether the material from which it is planned to be made fits into the overall picture of the interior.

So, we decide: size, color scheme and what materials will be used. This is the first step. If possible, it is worth drawing a sketch of the planned product. This will help to take into account all the nuances in the execution of the task.

If a piece of cardboard, canvas or any other solid surface is taken as the basis, then markings are made on it: where and how the decor elements will be located. If the base is fabric, then it is stretched over the base (for example, on a piece of plywood, board or plastic), and the rest of the fabric is fixed with back side. After the craft is completed, it is placed in a frame and hung on the wall.

There is another option for making panels on a fabric basis. You will need to take a solid foundation, for example, drywall sheet right size and glue foam rubber to it. For the received soft base and stretch the fabric. In this case, you can do without a frame.

After all the preparations, you can proceed to the main part of the manufacture: decoration.

Types of panels with your own hands

Consider the main types used in decoration:

Here are examples of the manufacture of various types of panels:

From prints of fruits and vegetables

When creating this panel, a child can also participate, as it is very simple to perform. The bright, colorful design of this creation is perfect for the kitchen.

For manufacturing you will need:

• Solid vegetables or fruits (it can be apples, any citrus fruits, pears, cabbage, etc.);
• Paint (gouache, oil, acrylic);
• The basis on which the decoration will be made. It can be cardboard, a board, a fabric stretched over a sheet of drywall.

The surface of the base is pre-degreased and painted in the desired shade. Cut fruits and vegetables in half and dip them in the paint. The dye is best poured thinly into a plate. We apply the painted fruit with the cut side to the base and get a stamp.

Stamps are made anywhere on the base, but images that look symmetrical look best.

From paper

There are many options for making paper creations. Let's look at the main ones:

From round paper structures

This product can be made with your own hands in an hour and is a great way to decorate the interior, as well as get a lot of positive emotions.

Let's prepare the materials:

• colored paper;
• Paperclips;
• Scotch;
• pins;
• stapler.

Procedure:

1. A sheet of paper is folded into an accordion, like a fan.
2. We bend the accordion in half.
3. We fix the edges at the fold with a stapler so that the accordion does not fall apart and a small fan is obtained. We connect three such fans and get a circle.
4. Harmonicas different colors can be combined into one circle, then the panel will turn out even brighter.
5. Connect many circles together by attaching them to the wall safety pins. The size of the circles and the composition itself can be as large as desired and take any shape.

From photos

In fact, this is a collage of photographs or artistic pictures, which can either have a specific theme or be completely abstract. Photos are combined into one composition and fixed on the wall or other base. Design option: combine many images of sea and sky.

From colored paper

There are a lot of options for making crafts from colored paper. Today we offer the option "Flowers from Hearts", which is suitable even for children's master class. It is very simple to perform, is an excellent tool for the development of fine motor skills of the child, and it looks amazing!

We will need:

• Office colored paper;
• The basis for the panel;
• Pencil;
• Scissors;
• Cardboard;
• Paints;
• Tassels;
• frame.

Let's get started:

1. Cut out the heart template. To make one flower, we need eight of these hearts. All hearts in a flower must be the same size.
2. Fold the heart in half and get a petal.
3. We glue a flower from such petals onto the base. It can be cardboard or a wall.
4. To make flower leaves, you need smaller green hearts.
5. We lay out the flowers in any order, depending on general form desired panel. It can be a heart shape, or you can lay out flowers in the shape of a tree. Show your imagination and bring it to life!

From newspaper tubes

Newspapers can be great for making DIY panels.

Necessary materials:

• Newspapers;
• Knitting needle;
• Glue;
• Wire;
• Brush;
• Knife;
• Acrylic paint.

Procedure:

1. We cut the newspaper sheet into two parts with a knife.
2. Apply a thin layer of glue to these parts.
3. We wind sheets of newspapers on a knitting needle diagonally. You should get thin tubes.
4. We take acrylic paint and paint over newspaper tubes in desired color.
5. We coat the resulting flagella with glue again and wrap the ends of each newspaper tube so that a spiral is obtained. Both ends must be twisted in opposite directions if you want to get the shape of a seahorse. You can make a circle: for this you just need to roll the entire tube in a spiral.
6. We fix the spirals with rubber bands and leave for 24 hours to dry.
7. We remove the rubber bands and make up the desired pattern from the resulting elements. Elements can be immediately mounted on the wall, or create a panel on a pre-prepared basis.

circles out newspaper tubes can be painted in different colors, combining several shades in one circle. Circles with a gradient look interesting: a transition from one color to another.

From wallpaper

This is interesting solution, which will enliven your interior and give it even more comfort.
There are several ways to make a panel of wallpaper yourself:

• Patchwork technique

Cut out fragments from existing wallpaper. Pieces can be of any shape, but must fit together. Consider general form all future composition. For example, you can cut out squares with flowers from three different types wallpaper and combine them together in several rows in a certain sequence. In this case, paired elements do not have to be arranged symmetrically.

• Whole wallpaper technique

We take the wallpaper with the desired image (for example, a sakura branch), carefully cut it out and paste it into the frame, or glue it on the wall and decorate it with moldings or panels.

• Style Combination

The design here is only limited by your imagination! Combine whole pieces of wallpaper with small cut-out fragments. It is modern and inexpensive way decorate your home.
Important! If you can’t decide on the style of the future composition, then you should take a closer look at the image of flowers and plants in soft colors. It is always appropriate and looks beautiful.

From salt dough

This type of panel is one of the most budgetary, since its manufacture requires a minimum of material and usually everything you need is always at home.

We offer a variant of a stucco panel, where the arms and legs of your child will be printed. This creation will allow you to decorate your baby's bedroom in an original way and keep the memory of his childhood for a long time.

We will need:

• Flour;
• Salt;
• Colored gouache (optional).

Procedure:

1. We take flour and salt in proportions of two to one. Two cups of flour are mixed with a glass of salt, then water is added. The approximate volume of water for this amount of flour and salt will be 125 ml.
2. Knead a stiff dough. If it sticks to your hands, add more flour. The dough should be elastic and not stick to your hands.
3. If you want to make the panel colorful, then it's time to add gouache, decorating the dough with it.
4. Roll out the dough. Its approximate thickness should be about 2 centimeters. The shape of a piece of dough can be any.
5. We bring the dough to the baby and gently press his palm and foot into the mass. The pressure should be light, but sufficient to leave a mark.
6. We make two through holes in the dough - this is for the future ribbon, on which the panel will then hang.
7. Put everything on a baking sheet and cover with baking paper.
8. Preheat the oven to 90 degrees and put the dough there to dry. This will take approximately two to two and a half hours. It is necessary to turn the dough gently once, in the middle of drying.
9. We paint the resulting panel with colored or white gouache, thread the tape into the holes - voila! A very touching and cute decoration for your home is ready!

From fabric

Making panels with fabric came into fashion not so long ago: only in last years hand-made lovers turned their attention to the fabric. Such a product is ideal for an interior in the Provence style. Consider the main types of woven panels that you can do with your own hands:

Patchwork

Are used various techniques for the manufacture of such panels, but they all have one thing in common: this is the use of shreds of fabric in the work. There are many patterns of such products on the Internet. Panels can be both on a fabric basis and on rigid structures. You will need any fabric for making: from pieces of tulle to scraps of old bed linen.

Felt for creativity

The felt panel is one of the most popular among needlewomen. You only need pieces of felt of different colors, a pattern of future details of the picture, threads with a needle or glue and a base on which it is planned to fix all the details of the panel. Felt is a very fertile material for creativity: it will help to bring all fantasies to life. The felt panel will become great decoration living room or hallway.

Burlap looks like an extremely nondescript material, but it begins to play with completely different colors when craftswomen use it in their work. Burlap can be wrapped around a frame for a panel, can be used as a basis for other materials: beads, lace and others. This coarse material perfectly emphasizes the tenderness and sophistication of other fabrics.

The wool panel is the most a simple product in the technique of wet felting. This is an interesting process in which the wool is compacted. in a certain way in order to get felt. The drawing on such a panel can be anything: it all depends on the skill of the needlewoman.

If you want to take a one-color piece of fabric and draw a certain picture on it, then keep in mind that this is not as easy as it seems. It is worth practicing on a draft, and then move on to the fabric that you plan to use on the panel.

From beads

In this version of the panel, all or part of its elements are made of beads. To begin with, the elements themselves are made, and then they are already fixed to the base and, if desired, framed.

From thread and nails

It's far from new, but very interesting way make a panel with your own hands! Minimalism reigns here in the choice of materials, but this panel does not become insipid and boring, but, on the contrary, attracts admiring glances.

The whole point is that carnations are hammered onto a solid base. This can be done randomly, or it can be done according to a certain scheme, which can be successfully found on the Internet. Threads are stretched between the nails in several layers. Thanks to this, a certain pattern is created.

From buttons

Ideal option for beginners! Buttons can be used to decorate a panel made of fabric or paper, or you can create a product made entirely of buttons. This will require

• PVA glue;
• Buttons;
• The basis.

Order of execution:

1. Draw on the basis of the sketch: where the buttons will be located and what pattern they should depict together.
2. Glue the buttons with PVA glue to the base.

The design can be anything: inscriptions, abstraction, flora and fauna, and others.

Mirror panel

A modern panel created from pieces of mirrors. Its complex variants can only be made by specialists, while simple ones are very affordable for independent work. Mirror panel will become additional illumination in the room.

Necessary materials:

• Mirror tiles;
• Liquid Nails;
• Base with wooden planks, if you plan to stick the mirrors not directly on the wall.

The principle of operation is clear: we combine various mirror pieces and attach them to right order to a wall or other base on liquid nails.

Usually done in abstract style from a variety of wood species. very beneficial in classic interior look wooden panels with inlaid semi-precious stones.

Dry flowers and leaves

Great for children's creativity. Deciding on the plot future work, and then on a solid base (cardboard, fiberboard) with glue we glue dried flowers and leaves (juniper twigs, tree leaves - any flora will do). Great addition grains, seeds and twigs will become.

Grains and seeds

A sketch of the future picture is applied to a solid, already painted base. Then, cereals and seeds are attached to the base with PVA glue. Large grains need to be glued each individually, and a small scattering, for example, rice, should be poured onto the glue already applied to the base.

Gypsum panel - simple and original way interior decoration of a living roomGypsum panel is often used to decorate the interior in modern style. From such natural material you can create various 3D elements, relief drawings, "live" figures different forms and sizes. Gypsum panels often decorate apartments and houses, as well as the walls of exhibition halls, halls, restaurants and other premises of a large crowd of people. Often such compositions adorn the walls of mansions. Panels perform an aesthetic function and display financial well-being wealthy owners.

Gypsum panel: material advantages

It is much more difficult to make a composition from gypsum with your own hands than from other materials. But it is from gypsum that you can make a three-dimensional panel with your own hands. Gypsum is a fairly practical and self-sufficient material. It does not need to be mixed with other impurities and chemical additives so it is hypoallergenic. Gypsum panel will be great practical decor any room.

Advantages of gypsum as a material for panels:

• The material is refractory;
• Serves as an excellent conductor of heat;
• Retains its structure for a very long time;
• Does a good job of soundproofing.

Gypsum - durable, natural and environmentally friendly pure material, which is often used to make various souvenirs and decor items

The end result of a gypsum wall composition is a matter of individual presentation of style and beauty beyond the accepted standards. A luxurious panel can completely change the design of a room.

To highlight the panel against the general background, placing the right accents, you can use some useful tips:

• It is better to highlight any composition with a frame or a baguette of an expressive color;
• The theme of the panel should harmoniously emphasize general interior premises and directly correspond to a specific room;
• You can make it more expressive and lively with the help of lighting;
• With the help of a gypsum composition, small wall defects can be hidden;
• Gypsum is easy to restore.

It is quite easy to make a small panel at home by purchasing plaster and a mold in advance. All you need to do is dilute the gypsum to the density of liquid sour cream, pour it into finished form, wait until the solution hardens and take out the product, prime it and, if necessary, apply paint, and fix it on top with PVA glue. That's all, the plaster panel is ready.

Scene selection for plaster panel can be very diverse: from abstraction to a specific drawing

If the gypsum is over during the work, then the elements of the panel can be made of decorative plaster.

Do-it-yourself gypsum panel: master class

Gypsum panel looks great in any part of the house or apartment. Look especially impressive and stylish three-dimensional panels the size of the entire wall. Consider an example of creating a plaster flower.

Master class on making a flower from gypsum:

• The surface of the wall must be made perfectly flat and then puttied;
• Without pressing, apply the future drawing to the wall with a pencil;
• Apply gypsum mixture palette knife, accurately highlighting the relief of the flower;
• After drying, sand all the irregularities with coarse sandpaper;
• Apply a thin layer finishing putty around the perimeter of the flower;
• After drying, sand the flower with fine sandpaper;
• Cover the flower with snow-white acrylic paint in two layers;
• Highlight convex sharp edges with gold paint using a thin brush.

After the panel has completely dried, it can be fixed with a glossy varnish on the stone. Thanks to this finishing touch, the flower will become like porcelain and will have golden tints along the borders.

A decorative panel with three-dimensional gypsum flowers will decorate the bedroom, create a spiritual atmosphere in the place of rest

We make a decorative panel of gypsum on the wall

You can perfectly complement the design of your home thanks to such an amazing and wonderful thing as decorative panel plaster on the wall. This material can be used to create voluminous compositions striking beauty.

It is quite easy to make a decorative panel with your own hands. Consider the process of making panels for the kitchen in the form of a cup.

The process should start with:

• Preparation of two containers: the cup itself and another larger container, let it be flower pot similar form;
• Covering the outside of the cup soapy water, to avoid sticking solution;
• Immerse exactly the cup horizontal position in a pot and fall asleep free space half sand between them;
• We fill gypsum mortar back to original form;
• When the plaster is dry, carefully remove the mold from the sand pot and remove the cup.

beautiful and stylish panel from plaster will help to revive the static kitchen interior reflects your personality and taste

As a result, we got a cast of half of the cup, repeating its shape. Next, you need to dry the cast well and grease completely with soapy water. After that, you need to fill it again with an even layer of gypsum.

In the process of pouring the solution, the mold should be constantly shaken a little so that all the air comes out and eventually does not remain on the product.

You can make this kind of mold in any quantity. You can paint them with multi-colored paints or cover all the elements with white. You can fix the composition with a frame of baguettes or other homemade materials. The bas-relief is fixed on the wall liquid nails. Such products decorate the wall and add zest, make it more voluminous and interesting.

How to make vintage gypsum wall panels

Making a panel of gypsum with your own hands, as we have seen, is not difficult. But not everyone dares to make it unusual and give it an old fashioned look. The main thing is to choose the right necessary material and get a little familiar with the application technique special paints desired shades. Such vintage panels will have an elegant and special sophisticated look.

With the help of paint and bituminous wax, you can give the panel a certain charm and spirit of antiquity.

Vintage panels are made as follows:

• We take bituminous wax and carefully apply it to the surface of the panel with a brush. Thus, an illusion similar to a stone is created.
• After application, remove the resulting film with a napkin or paper towel.
• Next, sprinkle the surface of the panel with talcum powder, and fill the recesses with wax. Embossed recesses are tinted with dark paint.

You can achieve the effect of "marbled" using paint and a regular sponge. You can add antiquity to the panel with special gold foil or color.

A win-win option to make the panel vintage is to paint the recesses with silver paint.

Decorative plaster panel (video)

Colorful bas-reliefs - voluminous stucco paintings - can rarely be seen on the walls and ceilings of private houses and apartments. The cost of manual work on modeling and painting sculptural panels is too high and the services of masters are not available to everyone. Therefore, an ordinary homeowner who wants to decorate a home in this way has no choice but to make a bas-relief on the wall with his own hands. But since not all people are endowed with artistic abilities, we propose to consider simplified techniques for creating such images.

Casting stucco in molds

To sculpt a bas-relief decoration on the entire wall, shown below in the photo, you need to have drawing skills, since its outline is first applied to the surface. If you are talented in another area, then the solution is simple: make silicone molds, pour plaster decorations into them and stick them on the walls.

Reference. Of course, you can go the simpler way: buy at affordable price decorative elements sculptures made from modern materials- polyurethane or foam. But it is much more attractive and pleasant to create an individual pattern to your taste, suitable for the design of the room.

Task number one is the manufacture of a three-dimensional prototype - a counter-relief, the basis for a future form. As a rule, the wall details of the landscape are various flowers, vine and other elements of nature that look equally good in any room - kitchen, bedroom or living room. The prototype of the pattern you like can be made in the following ways:

• sculpt from plasticine or clay;
• cut from wood;
• transfer the contours of the picture onto paper and give them a relief using gypsum plaster, as shown in the video at the end of the section:
• Finally, apply ready-made convex images and figures.

This is what the silicone mold looks like.

Note. You can involve all family members in sculpting a counter-relief, including a child who knows how to handle plasticine well.

Now you need to purchase silicone with a hardening catalyst, whose amount depends on the size of the resulting sculpture, and then proceed according to the following instructions:

1. Make a bath for pouring, whose sides are 1 cm higher than the prototype. The simplest option- lay the counter-relief on the glass and mold the plasticine sides around.
2. Mix the silicone with the catalyst in the proportions indicated on the package. To control the quality of mixing, a little food coloring can be added to the solution. Pour it into the tub.
3. After waiting for solidification, remove silicone mold and remove the burr around the edges with scissors.
4. Prepare a solution of gypsum or alabaster (the consistency is like that of liquid sour cream) and fill the recess in the mold, remove the protruding part with a spatula. Allow 10-15 minutes to harden.
5. Remove the finished bas-relief, process its edges and stick it on the wall, ceiling or home fireplace.

Filling the prototype with silicone mortar

Advice. If your pattern has a thin and elongated shape, then after pouring the plaster, carefully lay 1-2 pieces of steel wire along the entire length for strength.

How a bas-relief is cast from plaster with your own hands is shown in the video:

We apply a relief image - a master class

If you are fine with drawing and have a desire to become a beginner sculptor, then it is not necessary to make molds to apply a bas-relief. Create a three-dimensional flower pattern right on the wall using this technology:

1. Clean and level the wall surface. Treat it with a primer deep penetration and wait 30 minutes for it to dry.
2. Prepare gypsum plaster and apply it in an even layer 3-4 mm thick. It is not necessary to make the surface smooth.
3. Taking advantage a simple tool- with a plastic spoon, spatula and trowel, complete the desired pattern. The photo below shows an example - an ornament of blossoming roses.
4. Once the plaster has set, carefully remove wide spatula protruding edges of the resulting petals. If necessary, refine the drawing with a clerical knife.
5. Cover the bas-relief with a primer. To avoid gaps, it is recommended to add a little dye to it.

The pattern is formed with a regular spoon

Note. Apply the drawing in full, leaving no empty space. The dimensions of the elements do not play a role and can be different, the main thing is that the whole picture looks good.

At the end, the finished bas-relief remains to be painted with a brush - maklovitsa. The ends of the petals can be tinted with a different color using a wide flat brush, as shown in the video tutorial:

We create a full-fledged bas-relief

This is the most complex technique, requiring not only the ability to draw, but also some skills in imposing textured plaster. You need to start work by choosing a picture and a place on the wall where it will be applied in bulk. The illumination of the site should be correctly assessed, since the bas-relief looks great in the interior due to the play of light and shadow. If you can’t successfully choose a place, then make a picture on any wall, but subsequently install 2-3 lamps above it, as shown in the photo.

Advice. When applying a large relief pattern, the master is close to the surface and cannot see how the whole picture changes in the process of work. Therefore, it is important for a novice sculptor to learn how to evaluate the correctness of actions and often look at the result of their labors from the outside.

To create a bas-relief, use the following technique:

1. Transfer the contours of the selected pattern to the surface of the wall. There are 2 ways: just draw them with a pencil or copy them onto a transparent film. The latter is applied to the wall, where it has already been applied thin layer putty or Marseille wax, and the contour is squeezed out along the lines with a slightly pointed object.
2. Give the drawing volume by applying gypsum plaster to the surface (thick consistency). This must be done in several layers and without haste, forming the outlines of each part with a spatula or other convenient tool.
3. Since the mortar hardens for a long time (about 3 hours), give clarity to the bas-relief by removing excess plaster with a clerical knife or a narrow spatula. If you removed too much, then correct it with finishing putty.
4. After the raised image has hardened, remove the remaining sharp edges and smooth out the pattern with sandpaper.

Advice. Do not use solutions of pure gypsum and alabaster for application, they harden too quickly and do not allow you to adjust the details of the picture. Do not forget to prepare the surface of the wall - level and coat with a primer.

When the bas-relief is ready, it can be painted in the desired color (usually white) or painted, creating a real picture. How the wizard does it is shown in the video:

Conclusion

Self-creation of a bas-relief is not an easy task. Stock up on patience and time, and be careful in the process. Without experience, you should not immediately take on a large image, first practice and apply a small 3D drawing on a board or other flat surface. This will allow you to understand the nuances of the formation small parts and master the technique of working with a solution.

Many craftswomen, and we are no exception, crack panels from salt dough, especially if they are made on large surface, fish, for example. We decided to switch to a plaster base.

So, roll out on a sheet ceiling covering or on a napkin for hot layer ready salt dough, intended for modeling, of such thickness as your panel will be.

Cut out the desired shape on the cake.

The edges can be corrected with a stack ...

Wipe off the rest of the flour so that it is clean ...

Putting plaster...
Dilute gypsum in a ratio of 1:1.
If there is less gypsum, then the product will turn out to be loose and brittle.

We insert tubes for the formation of holes, or a steel loop.

Waiting for it to freeze...

Frozen ... Remove the dough ...

This is the reverse side.
The edges can be easily touched up with a knife or sandpaper.

Front side... Smooth and even...
Here the base is ready, now you can sculpt on it from dough, clay, plastic (whatever you like). To firmly stick the dough to the base, lightly grease the base with PVA glue. And for gluing the dough, as usual, use water.

And I decided to make a fish for myself ...
Here's the test cut...

Filled with plaster...

Finished base...
I'll post the color later...

Personally, we really liked this method - it is convenient, fast, reliable and the dough is then used to sculpt the same panels ...

We hope that our experience will be useful to you.

We will need materials: cover from cardboard box, cardboard, foam tape, food film, coarse salt, buckwheat, PVA glue, printout, acrylic paints, brushes, sponges, Maimeri 688 craquelure, gold powder for grouting, synthetic varnish, decorative elements.

1. We prepare a mold for casting a panel
We need a lid from a hard cardboard box (for example, a shoe box), in the center of which we fix a rectangle made of hard cardboard. On foam tape or in any other way, the main thing is to achieve a height difference - the central rectangle should rise above the base, then on the finished casting we will get an in-depth plane for gluing the printout and a three-dimensional frame around it.
2. Now we "cover" the bottom and walls of our form with a thin cling film. With it, we can easily remove the frozen blank from the mold, and also get a light relief resembling craquelure. The depth and intensity of the relief depends only on us - the film is a very malleable material.
3. Sprinkle salt and buckwheat on the bottom of the mold in places where we want to get potholes and cavities. I scattered around the perimeter of the form and into the corners of our central rectangle, for a smooth transition to the frame.

4. Let's start casting. We prepare gypsum, or in this case, alabaster, and pour it into our mold. In places where we need holes, we install plastic straws for juice. We are waiting for complete solidification and remove our workpiece.

5. We release the workpiece from the film, wash the salt and buckwheat with water (in especially difficult places we help ourselves with tweezers) We dry our result.

6. Let's start decoupage.

In this work, I used a printout on photo paper. Then she concluded that the napkin or rice paper would look much more interesting on such a plaster surface. I will take this into account in other works.
We soak the printout in water, separate the paper layer and carefully glue the resulting film onto the workpiece. Because gypsum absorbs glue, then in advance I primed the entire surface of the PVA. Then I glued a printout on it.

7. Frame and reverse side coloring acrylic paints. We got dark chocolate. We paint depressions, folds and other elements of our relief with yellow, red acrylic. For supporting common gamut our picture. We paint over with a brush or sponge not only on the surface, but also in the depths of the depressions. And also with a sponge-sponge we smooth out the transition from the printout to the frame, choosing the desired acrylic color.

8. To obtain cracks, apply an even layer of Maymeri 688 on the printout itself, on the frame. Dry with a hair dryer. We rub the resulting cracks with gold powder or shadows.

9. On the frame and inner corners, apply our main dark brown color with a sponge. To even out the color. With a dry brush with gold powder, once again go over the entire plane, highlighting the relief.
10. We cover the work with synthetic varnish. We dry. We will insert a cord into the holes. And we will knit decorative raffia bows.

I hope MC is helpful.