Kitchen what is better film or plastic. We decide which kitchen is better: plastic or MDF.

When choosing a kitchen, it is important to pay attention not only to its dimensions and appearance but also the material from which it is made. Don't skimp on kitchen furniture because you will regret it later. High humidity, constantly getting hot oil on the kitchen set - all this will quickly ruin the furniture if it is not of high enough quality.

Elegant look bright kitchen

Before deciding what better than MDF or plastic, you should consider all the pros and cons of these materials. If you are not sure what you can do right choice then contact the professionals. It is important to know that furniture made exclusively from plastic does not exist, since such sets use a base made of MDF or chipboard. Therefore, the question of which is better - plastic or MDF plastic kitchens, does not sound quite correct.

Facades painted or prepared for painting

First of all, it is better to consider MDF kitchens, as they are at the peak of popularity today. The main advantage of such kitchens - big choice colors, if you choose already painted facades. But the list of benefits doesn't end there:

1. All colors from the palette can be easily combined with each other.
2. Painted MDF is easy to clean without the use of additional products.
3. Opportunity to do individual design- curved or rounded facade.
4. Poorly absorbs moisture and odors, which is important for kitchen furniture.
5. Large selection of coatings - matte, glossy or pearlescent.

However, do not forget that MDF for the kitchen has its drawbacks:

1. After a certain time, the colors fade and lose their former attractiveness.
2. An MDF kitchen is an expensive pleasure. Such furniture does not fall into the budget options.
3. The coating is very easily soiled and it constantly leaves fingerprints. In order for the kitchen to look neat, you will need to regularly wipe the facades.
4. The material is resistant to mechanical damage.
5. The reverse side of the facades is white, and over time it will lose its whiteness.

Beautifully painted facades look great

Colour kitchen set- this is the main thing in kitchen design, as this part unites the whole design idea. There is a large one on the market. Painted facades from MDF for the kitchen are more popular than those that are simply prepared for painting. However, if you want to choose the right shade yourself, then it is better to choose the second option.

If you plan to paint MDF facades yourself, then consider all the nuances during preparation, the choice of paint and materials. Advantages of facades prepared for painting:

• Unlimited choice of color palette.
• The choice of any coating - matte or lacquered.
• A wide selection of coatings.
• No additional processing required.

• Decorative. This is important condition to create a stylish interior.
• Service life of the material.
• Type of construction kitchen set.
• Coating thickness.

Tip: if you are in doubt about which material to choose for a particular product, it is better to contact a consultant in the store. He will talk about all the advantages of each paintwork and how they differ from each other.

To important features LKM include:

1. Environmental friendliness. Most paints contain harmful and toxic substances that are not suitable for painting home furniture. Give preference to safe formulations.
2. Drying time. This parameter determines how quickly you finish painting facades. However, keep in mind that the time indicated on the bank is usually not true. Drying time is directly dependent on temperature and humidity.
3. Hiding power. This parameter determines how many coats of paint will be required for an even finish. Choose those coatings that are applied in one layer.

Painted MDF is very popular among housewives

Facades covered with PVC film

Often on the market you can find kitchen sets made of MDF coated with PVC film. Such a film is able to imitate absolutely any coating, even the most expensive and elite wood. For this reason, this technology is popular. Before choosing this option, consider its advantages and disadvantages.

Disadvantages:

1. The back side is white - it fades in the sun and is poorly washed.
2. The film, upon prolonged contact with water and hot steam, begins to peel off and bubbles appear on the surface, which spoil the appearance of the kitchen set.
3. If we look at furniture from a close distance, it is still noticeable that this is not a natural material, but an imitation.

Advantages:

• A kitchen with a film coating will cost you much less than with painted facades.
• PVC film imitates any coating.
• Environmental friendliness. In addition, the film is resistant to mechanical damage.
• Facades are made of any size and shape.

If you have gone through all the options, do not despair, cover the headset with a film

About plastic

MDF material for the kitchen is perfect solution especially when there is such a choice. However, it is worth considering plastic kitchens in order to make a final decision. First, pay attention to the positive points:

• Kitchens that are made of plastic have high wear resistance.
• Coatings are durable, they do not fade in the sun and do not lose color. Not afraid of moisture and steam.
• For cleaning use any detergents, because plastic kitchens are unpretentious.
• Suitable for different budgets. With MDF base - this is a more expensive option. With chipboard - budget.

Disadvantages:

• Matte surfaces require special care.
• Facade made of plastic easily soiled. Fingerprints remain on the surface.
• The inner sides of the walls are white.
• Sometimes the picture is distorted in the center of the facade. This is due to the production technology.

Plastic facades for the kitchen are carried out in three main stylistic directions:

1. Classic style. To implement this design ideas simple and uncomplicated forms, neutral shades and a minimum of details are used.
2. Empire. This style is characterized by various patterns and decorations. The color scheme is light and delicate. The shapes are thin and smooth.
3. High tech. Popular style today. It uses a lot of elements not only from plastic, but also from metal or glass. The choice of colors is organic - black, white or red. Sometimes metallic shades are used.

This nuance is important to consider when choosing which is better, MDF or plastic for the kitchen. Still, plastic will limit you a bit when creating an unusual design.

WATCH VIDEO

As you can see, a plastic-MDF kitchen will turn out to be almost equivalent in terms of its characteristics, so making a choice is problematic. When choosing which kitchen is better, plastic or MDF, start first of all from your personal preferences or consult with professional designer. An experienced specialist, taking into account all the nuances, will help you decide.

The choice of a kitchen set is always associated with a certain tension. After all, the design of this space requires taking into account several factors: the comfort of cooking and eating, the convenience of storing and using objects and products, and aesthetic aspects. In short, you want the kitchen to be perfect. And then a lot of nuances pop up that have to be taken into account when choosing and making a decision on them.

For example, the material from which the headset or its facades are made. It is quite difficult to choose in the modern variety. You need to weigh the characteristics of each, compare and decide what will be better in a particular case. Of course, photos and reviews will not interfere. We will consider such comparative characteristic: MDF and plastic - which is better?

Painted MDF

The market offers a huge selection color solutions in this direction, so there are a lot of proposals. In this variety, you can lose the original idea, so it’s worth weighing everything carefully. If apply special forms material, you can get very original look kitchens.

The material is painted in the same way as painting a car: first, the surface is cleaned, then primed, and then painted in several layers. Moreover, their number is determined by the qualities of the base. And at the end, a layer of varnish is applied to protect the coating from external influences.

Advantages

• huge assortment color spectrum, which allows you to make various exclusive combinations;
• the coating can be matte, glossy, mother-of-pearl or chameleon;
• resistance to aromas and moisture;
• the facade can be rounded and bent, so the shape can be completely diverse;
• ease of maintenance.

disadvantages

• cost exceeds plastic version, facades with PVC film;
• fingerprints remain on the coating, which forces you to clean more often;
• poor resistance to ultraviolet radiation, as a result of which even the most bright colors fade fairly quickly.
• low resistance to external influences– an incorrect movement can cause damage to the surface;
• due to back side white, if you do not regularly care for the facade, the appearance may deteriorate.

MDF covered with PVC film

This is an inexpensive solution, therefore it has a certain list of disadvantages. For example, a slightly old-fashioned appearance. This is largely due to the lack of texture in the pattern. But this allows significant savings. And if you need a budget kitchen model, then it can be made of such material.

Lamination of the material with PVC film takes place in the press equipment. First, glue is applied to the surface. Its qualities affect the final appearance.

Advantages

• good budget option
• resistance to external influences;
• for care, the use of chemically aggressive agents is allowed;
• a wide range of colors and textures;
• unusual samples are allowed, which does not greatly affect the price.

disadvantages

• after a certain period, the color of the material becomes dull;
• if a pattern is used that imitates the structure of wood, the headset gets a more “cheap” appearance;
• in places of increased loads during operation, the film may peel off;
• insofar as back side the facade is white, after a while it runs the risk of turning yellow.

Frame MDF

Despite the original appearance, the kitchen remains in the budget segment. And even though this option has certain disadvantages, the look, style and texture are close to solid wood.

This solution can be combined with rattan, mirrors and glass.

Advantages

• it is possible to combine several materials in one facade;
• several elements can be inserted into the frame;
• the weight is lighter than that of an array;
• the size can be any, and the price does not vary much;
• All in all, it's a budget option.

disadvantages

• low resistance to a humid environment;
• it takes effort to care;
• when exposed to elevated temperatures, the material can peel off, which often occurs in the area of ​​\u200b\u200bthe plate.

Plastic

Another solution that is often used in modern kitchens– covering of facades with plastic. The environment in which it has to be does not allow the kitchen to be completely plastic, so only the coating is done.

There are two technologies by which plastic-coated facades are created:

1. Plastic is glued to chipboard.
2. Plastic is glued to MDF.

There are several ways to process the ends:

• PVC or acrylic edge, you can make the ends of a different color than the main plane;
• edging aluminum profile;
• postforming - obtaining ends without seams.

Advantages

• resistance to a humid environment;
• long service life;
• resistance to chemically active household products;
• a wide range of colors;
• resistance to ultraviolet radiation.

disadvantages

• does not wash well matte coating, and over time, aesthetic properties deteriorate;
• the back side is usually White color, which causes a rather rapid deterioration in the appearance of this part of the facade;
• in the production of cold pressing, geometric distortions occur;
• fingerprints remain on the coating, which affects the visual perception.

What to choose?

Understanding the features of a particular material, you can make a choice in one or another favor. The main thing is to clearly correlate the disadvantages and advantages with your conditions and views, it is also necessary with the purchase budget.

After all, the cost of a kitchen set very often plays a significant role when choosing. Therefore, to choose plastic or MDF, everyone chooses for himself. It's only important to get best option for external and internal characteristics based on reviews and photos.

Choosing a finish kitchen space, as well as the colors and design of cabinet furniture facades, each owner decides which kitchen is best for him: plastic or MDF. Both materials have much in common, they have good performance characteristics.

Technological processes for the production of both types of kitchens are similar. An MDF board is used as the basis for it, which is then finished with a melamine film of the required color. Another type of base chipboard, with a layer of plastic applied on top. Both types are environmentally friendly, do not fade in the sun and are capable of correct operation serve for a very long time. They do not require any special washing method and can be exactly the color and design you want.

And now let's take a closer look at the differences that affect what kind of facade for the kitchen is better: plastic or MDF. Of fundamental importance is the thickness of the material. When purchasing a kitchen, please note that plastic facades must be at least 18 mm thick, and MDF facades - at least 16 mm. This will allow you to purchase truly high-quality equipment.

Kitchen material plastic is more prone to scratches, and MDF is less resistant to impact high humidity and high temperatures. However, this drawback can be eliminated by purchasing a kitchen from special kind moisture resistant MDF. Plastic, on the other hand, is not afraid of elevated temperatures, water vapor, or moisture. It does not deform over time.

When deciding which kitchen is better to choose: MDF or plastic, it is also worth considering that the film applied to MDF surface plates can peel off during operation at the joints and at the corners.

This will not happen with plastic. But on plastic

When choosing a kitchen, many wondered which kitchen is better: plastic or MDF. The choice between plastic and other types of facade coatings determines the appearance and cost of the kitchen, but it is not so easy to quickly understand even the basic options.

Choose coverage kitchen facades needed based on your budget.

MDF and plastic: the same or different?

First, let's define what MDF is. At its core, this is a material made using a more advanced (20 years younger) technology than chipboard. MDF (wood fiber board) medium density) is a pressed wood chips. According to its properties, MDF is an order of magnitude better than chipboard, traditional for economy-class kitchens, but it also costs more. It is ideal for creating complex profiles of any style.

But the quality of the MDF-based kitchen depends more on the coating. Therefore, reviews about them are very contradictory: some materials that cover the panels peel off after a year, some will serve long years and resistant to both moisture and temperature.

Kitchen with facades made of painted MDF panels.

A plastic kitchen is, as a rule, chipboard panels or the same MDF, covered with plastic to protect the base and decorative purposes. There are many types of plastic and ways to cover the base panel, so it’s also difficult to talk about the overall quality of “plastic” kitchens.

Therefore, when a consultant in a store explains to you which kitchen is better: from MDF or from plastic, he most likely has mind MDF or chipboard with plastic coated and MDF with other types of coating. Plastic as such is not used as a basis for kitchen facades, and MDF is in any case covered with some kind of material; in its raw form, this material is also not used in kitchen production.

Types of plastic coatings MDF

MDF is a material that provides almost unlimited possibilities to create a kitchen facade. It is easy to handle milling machine(forming a relief), and the pressed chips themselves are quite resistant to increased stress on kitchen furniture.

Plastic facades are perfect for a modern style kitchen.

The kitchen façade base plate is covered with:

1. PVC film (polyvinyl chloride). Pros: a variety of textures and patterns and low cost - economy class kitchens are made using this or even cheaper technology using chipboard. PVC film cleans well household chemicals and quite resistant to pollution. The disadvantages are also significant: PVC can only resemble natural materials, but on closer inspection it is easily distinguishable from more expensive options, in addition, at a temperature of more than 75 degrees, the plastic film begins to peel off (and a similar temperature next to the stove is the norm). Such a kitchen in its ideal condition will most likely not last long;
2. Glossy or matte HPL plastic (laminated paper). This type of coating is often used in the production of Art Nouveau kitchens. HPL does not allow the formation of a complex texture, it is always smooth, but in terms of richness of patterns it is not inferior to PVC, and in terms of brightness of colors and aesthetics it is superior. Minus - fingerprints are very noticeable on glossy plastic, and it is more difficult to remove dirt from matte plastic.

Plastic kitchen facades go well with aluminum inserts.

The choice of which kitchen is better: plastic-coated MDF or plastic applied to chipboard - is determined by the maximum renovation budget. An even cheaper option than MDF covered with plastic is chipboard covered with PVC film. Less resistant to all kinds of impact material gives lower cost and lower quality, these are kitchens in the lowest price segment.

Other MDF coatings

MDF is also covered with more expensive eco-friendly traditional materials:

1. Enamel. This coating is applied in several layers on the MDF base using the same technology that is used when painting cars (priming, painting in several layers with grinding after each painting). Enamel can cover a surface with a complex relief, and the variety of colors is almost endless. This is one of the most aesthetically pleasing finishes. Cons: high price, fading under exposure sun rays, fragility of the surface, which is easily damaged;
2. Veneer. This is a cheaper option compared to solid wood facade, but one of the most expensive compared to other MDF processing options. MDF board is taken as an inexpensive base and covered with fine wood veneer about a millimeter thick. Plus - a prestigious appearance. Cons: price, standard shapes and sizes (it is impossible to create, for example, concave shapes), the tree burns out in the sun, absorbs odors and requires increased attention when caring for the kitchen. Veneer kitchens in Russia domestic production most often unreasonably expensive, since MDF boards with glued veneer are imported to us very little.

The choice between enamel and veneer is often a choice of style, veneer is an inexpensive replacement for solid wood in kitchens. classical style. Enamel provides more space for unusual design solutions and creating a vibrant modern kitchen.

In general, if you choose which kitchen is better: plastic or MDF, if there are material possibilities, non-plastic surfaces are usually preferred. The exception is modern style kitchens - they look better with HPL coating. Although the reverse side of the prestigious appearance is the increased requirements for daily care of the kitchen.

Modern MDF furniture has gained wide popularity in our life. It has gained a good reputation for its high performance characteristics, attractive appearance and affordable price. Today you decide for yourself which one to choose. MDF furniture: with wooden or plastic fronts.

What is better for the kitchen - MDF enamel or plastic

If we talk about the kitchen, then every housewife wants to see in her “office” all the conditions for creating culinary masterpieces. Of course, you can order kitchen furniture made of expensive and solid natural wood, or you can choose a comfortable and practical kitchen from MDF with enamel, plastic or film coating.

MDF furniture with enamel coating

MDF enamel kitchens are popular due to their bright fresh design and modern style. Their facade sometimes looks unexpected and original, as in plan colors, and solutions: in one model there are combined colors and even the effect of a chameleon, mother of pearl and a gradient transition of colors, perhaps just glossy finish or matte finish. Enamel painting technologies allow to realize all ideas: unlike other painting methods, the surface of the MDF kitchen with enamel is covered car paint in a few steps. Like a car MDF material primed, after which layers of paint are applied. After complete drying, the surface is varnished and polished to a unique shine. Distinctive feature kitchens from MDF is the possibility of modeling the most incredible forms of the facade: rounded, convex and concave, wavy, conveying individuality in any style.

Facade made of MDF covered with PVC film

The budget option for decorating a kitchen from MDF is a plate covered with a PVC film. Manufacturing technology MDF boards with PVC simple: under vacuum press on glue base the board is laminated. The facade is obtained in multivariant textures and colors: matte and glossy, wood and stone, just plain. The range of colors allows you to choose kitchens with foil for the most sophisticated design of a classic or modern interior.

MDF kitchen with plastic

MDF kitchen covered with plastic is a new trend in interior fashion. Plastic is more expensive than MDF with enamel or PVC film, as it combines everything best performance enamels and films. The facade of the kitchen is made of plastic by applying plastic to the MDF panel by high pressure and high temperatures, with an edging with an aluminum profile or PVC edge. Plastic glued to MDF is very durable and reliable material, with a long service life.

Detachment of plastic from the base is fundamentally impossible, because thanks to the facade manufacturing technology, the material practically “sticks” to the surface of the panel.

Plastic is resistant to fading, temperature and mechanical stress. The disadvantages of plastic are similar to MDF enamel, although to a lesser extent. Fingerprints on the glossy plastic surface are also preserved. Spots are especially noticeable artificial lighting. The plastic facade can be decorated under a natural stone, wood, metal, any pattern can be applied to it.

Material for the kitchen: plastic, film or MDF enamel

The name of the abbreviation MDF is deciphered as a fine fraction. The material is obtained by grinding wood. Not used in its production epoxy resins and phenol, the fibers are glued together with lignin, which is released from the wood when it is heated. Therefore, the main binder is not synthetic, but natural origin. This allows us to evaluate MDF as an environmentally friendly material.

MDF is very durable and resistant to moisture, fungus and microorganisms, which is especially important in the production of kitchen furniture. According to its characteristics, MDF is much better than chipboard.

MDF boards are used as a base to give them decorative look use enamel, film and plastic.

MDF kitchens with enamel coated unpretentious operation and environmentally friendly: the enamel used for painting has certificates confirming its reliability. In addition, a painted MDF kitchen does not lose its original color and shape, since the coating material is much denser and less capricious than natural wood. Humidity and smell in the kitchen are the first enemies of any furniture, but MDF with enamel is absolutely resistant to their influence, since the resistant varnish coating does not dry out and reliably protects the stove from an aggressive environment - high temperature, steam and water.

Compared to enamel, the film is more resistant to cleaning compounds, so it can be safely washed with abrasive sponges without fear of damaging the surface.

The film is not afraid of impacts and other mechanical damage, on such a countertop you can safely put a kettle from the stove, drop the pan, accidentally hit it with a sharp object - the coating will not be damaged. In addition, the facade of the kitchen made of film with MDF is resistant to abrasion: over time, the coating does not lose its texture and color if it is not constantly exposed to active sunlight.

The facade, where the coating material is a film, also has its drawback - when heated with air or steam, the film can peel off. Often this happens on cabinets under which an oven, electric kettle or hob. Given this feature, you can operate the kitchen with a film coating for a long time.

The facade of the kitchen, finished with MDF with plastic, never fades or deforms. The material is resistant to mechanical impact: on a plastic table, you can cut vegetables without a board, leave hot pots - its appearance will not suffer. Another benefit is the appearance. MDF interior: Flawless gloss is eye-catching and looks great in any kitchen.

Which kitchen is better to choose - MDF enamel, film or plastic

The manufacturer of MDF kitchens warns that the care of this furniture requires care, does not allow the use of acids and abrasives. One unpleasant minus is fingerprints that remain on the furniture upon contact. At the factory, the interior of the MDF kitchen is painted white, which not everyone likes. The decisive factor not in favor of this furniture may be the tendency of enamel to mechanical damage: dropped dishes or a knife carelessly thrown onto the countertop can leave chips and scratches on a beautiful glossy surface. The high cost of an MDF kitchen with enamel is compensated by a beautiful appearance and the ability to choose a color for any kitchen design.

MDF with PVC film is a good imitation of wood and other materials for expensive furniture, and in terms of practicality and affordable price such a kitchen is in many ways better than an elite wooden one.

And yet, if the budget provides an opportunity to choose between three types of MDF coatings, it is worth stopping at plastic - this material has collected all the advantages of other coatings. Its strength is compared with tempered glass or aluminum alloy, which also decorate the facade. A significant drawback can only be considered the price of such a kitchen. By the way, the question of which kitchen is better - made of plastic or MDF sounds incorrect, it is better to be interested in what kind of coating to choose a facade for a kitchen from MDF so that the interior remains pristine for a long time.

Choosing a facade for the kitchen (video)

(0 Votes)

Attention, only TODAY!