There are few problems in life that a pleasant hot tub. At the same time, your personal comfort in the bathroom is a rather fragile thing, directly dependent on how seriously you took the renovation of this room. Particular attention should be paid to where the hot air flows rise. Which is better to make the ceiling in the bathroom, taking into account the consistently high humidity, hot pipes and often rising steam from very hot water? We offer an elegant or not very, but in any case quite effective solution to the issue in 50 photos with examples of ceiling surfaces in modern bathrooms.

But first, let's list the main requirements that apply to ceilings in bathrooms:

• good moisture resistance- the aforementioned steam, constant contact with moisture and elevated temperature with a material that does not meet this criterion will "cope" rather quickly, spoiling even the most beautiful and expensive repair without any regret;
• anti-corrosion properties, resistance to mold, stains, stains and condensation- all this directly affects the durability of the mounted ceilings;
• temperature reserve- ceiling surfaces should not be afraid of high temperatures or change their performance depending on specific temperature indicators;
• the possibility of easy, fast and safe installation of lighting fixtures- it is not worth destroying the mounted structure in order to replace one or two failed lamps.

Of course, each owner will definitely add a couple of his criteria to this list. Without fear of making a mistake, we assume that this is necessarily an attractive aesthetic appearance, hygienic safety and low cost. There is nothing reprehensible in the latter: the money saved is always something to spend on. For example, for a new luxury bath with armrests, in which it will be even more pleasant to relax after working days. Or a modern shower with radio. Who is closer.

What material to use for the ceiling in the bathroom?

It is not recommended for use in bathrooms due to poor susceptibility to high temperature conditions and the state of permanently high humidity in the room. If you see whitewash somewhere on the ceiling surface in the bathroom, you are very lucky: usually such ceilings become unusable very quickly, and the owners, having received a cruel lesson in life, move on to other, more practical options.

Styrofoam

The performance characteristics of the foam do not allow this material to be nominated as recommended for use. Most often, it is produced in the form of polystyrene tiles, laid in the manner of ordinary ceramic tiles over the entire ceiling area. If you have been thinking for a long time about which one is better to make the ceiling in the bathroom and eventually settled on this option, it means that you are not fully aware of the possible problems that you may encounter later: mold, fungus, constant condensation on the surface, due to which there may be a bad smell. You can forget about comfortable bathing.

Arguably!

Drywall

A rather controversial decision, in which the minuses are approximately equal in number with the pluses. For the use of drywall constructions in the bathroom, they speak of the wide design possibilities that this material in demand today provides. Against - not very reliable moisture resistance and the need to install the crate for subsequent sheathing of the ceiling with plasterboard panels. The likelihood of mold and mildew can be reduced to zero with scrupulous treatment of the material with an antiseptic, but why waste your time on this when there are plenty of other, more practical solutions for use in the bathroom?

The simplest and in most cases the budget option. Why with such a clause? It's all about how smooth your ceiling is, because for painting it needs to be properly prepared and primed. These services cost a lot of money and often take a lot of time.

For painting the ceiling surface, it is best to use latex or water-based paint and avoid water-based paint, since the latter high humidity rather quickly and noticeably loses its color and attractive appearance. In addition, water-dispersion ceiling paint options are easy to care for and can easily withstand even the most vigorous and intensive washing.

Colors should be chosen based on the overall color mood of the bathroom. Of course, the most versatile and common is white paint. Behind the seeming banality of the choice lies the quite obvious desire of the owners to make the ceiling in the bathroom universal and practical. At the same time, there are a lot of options with a rather original and curious coloring - we suggest you make sure of this immediately.

Plastic

"Folk" material, which the owners of apartments and houses with enviable persistence are trying to use in any room that is part of their living space. To a large extent, due to its budget: plastic panels are present in a wide range in almost any hardware store and therefore it is always possible to choose the best option for your family repair budget.

Other benefits are obvious:

• moisture resistance
• variety of textures and colors

However, in any barrel there is always a place for a modest fly in the ointment: if your bathroom has enough low ceilings, then the installation of plastic panels is not represented rational decision. For a simple reason: it requires the preparation of the so-called frame (battens), which takes a lot of precious centimeters from the top level.

Advice: if, nevertheless, plastic panels on the ceiling are what you want to see in your bathroom, then pay attention to collections with subtle borders between fragments. A solid, monolithic canvas will look more serious, more harmonious and more expensive!

Slatted ceilings

An attractive alternative to classic plastic panels. Due to the similarity of the source material, it has all the advantages that we talked about above.

Cassette ceilings are also widely used, differing from rack structures only in the width of the panels used. For small rooms, such ceilings are an excellent solution - no matter what wall covering you use, you can always choose a consonant in color option.

Lovers of regular geometric shapes and modern solutions in the spirit of contemporary - strictly note.

Stretch ceiling

We are destroying the common stereotype that stretch ceilings are undesirable for use in the bathroom (with simple stretch ceilings in the rooms). Countless texture solutions and the most different colors, wide opportunities photo printing and applying original patterns and other decorative elements, the ability of a stretched canvas to hold up to 100 liters of water in the event of an unexpected flood from somewhere above - isn't this a reason to say "yes" to stretch ceilings on the question of which ceiling is optimal for a bathroom?

Do not think about this question - it is rhetorical. It is better to carefully study the options below for stretch ceilings in the bathroom - there are a lot of cool ideas, which, perhaps, in the format of your premises will find the optimal practical implementation.

Some interesting design solutions to help

If you have not decided what kind of ceiling you will have in the bathroom, then here is a small selection of original compositions from the arsenal of designers around the world.

Summarizing

We really hope that you have carefully studied the options we have considered, weighed all the pros and cons and are determined to create a real aesthetic revolution within the walls of your small or not very bathroom. Still, deciding which bathroom ceiling is best is only the first step towards building a truly comfortable space within the walls of this vitally important room for every person. There are a lot of nuances and painful repairs ahead, but if you really managed to find a compromise between the dictates of your heart and the voice of reason in your choice, then the probability of enjoying each bath you take is subsequently close to conditionally 100%.

When planning a renovation in the bathroom, you certainly have to deal with the choice of materials for finishing all surfaces of this room. Of course, I want them to be not only reliable and have the longest possible service life, but also fully meet the aesthetic needs of homeowners.

Which ceiling in the bathroom to choose is one of the questions that you need to find the right answer. It is important to find a material that is not only beautiful and hygienic, but also has no contraindications for installation in a room with high humidity.

In the modern assortment of construction stores you can find any in demand for finishing works material, but it is necessary that it is well suited for a particular bathroom, corresponding to its area, ceiling height, general style design.

Before moving on to consider the types of ceiling that may be suitable for this room, you need to figure out what requirements they must meet.

If you can choose almost any materials for the repair of other rooms, then because of the high humidity in the bathroom, this factor must first be taken into account. So, materials for finishing the ceiling in the bathroom must meet the following requirements:

• The water resistance of the material is mandatory for this room, since humidity and vapor saturation are its natural state. In addition, you should not lose sight of the fact that bathrooms are most often flooded by neighbors from above, since no one is immune from a leaking tap or washing machine.

Leaks in the bathroom - very likely, and the ceiling should be "ready for it"

• Ease of care. High humidity contributes to the formation of condensation on the ceiling, and if you do not carry out periodic surface treatment detergents Mold may develop over time. Therefore, the bathroom ceiling should be easy to clean with a soft cloth and a damp sponge and not be afraid of household chemicals.

• - the room in which they receive water procedures all family members. That is, a priori, all materials for its decoration should be environmentally friendly, absolutely safe, hygienic.

One of the key requirements is an aesthetic appearance that is in harmony with the overall design of the bathroom.

• Aesthetic appearance of the surface. If the bathroom is planned to be renovated using expensive materials, the ceiling must comply general interior. Therefore, the design must be thought out very carefully.

• Lighting can be attributed to the next criterion, since it is closely related to the ceiling plane. As a rule, there are no windows in the bathrooms, so all hope is only for artificial light sources. If the ceiling is made dark, then more electrical appliances and energy costs will be required to create a comfortable illumination of the room. For these reasons, it is recommended to choose a ceiling of light shades - then it will enhance the brightness of the lamps.

The main types of ceilings and their characteristics

When the selection criteria are clarified, you can move on to information about what types of ceilings can be installed in the bathroom, and which ones are best suited for this room.

Yes, in the bathroom varying degrees the following options apply:

• Leveling the surface or finishing with ceramic tiles.
• Creating a false ceiling:

- from aluminum rails - rack;

- from PVC panels;

- from moisture-resistant drywall;

- from plates made of various materials.

• Stretch ceiling installation.

Now it's time to consider what each of the ceilings is, what positive and negative qualities it has and how suitable it is for the conditions of the bathroom.

painted ceiling

This type of ceiling can be called traditional and the most affordable of all existing ones, especially if you have the skills to level surfaces with plaster and putty. If there are none, you can always invite the master to perform this work. Standard bathrooms have a small area, so the work will not cost too much.

One of the most "budget" options - painting the ceiling

Provided that the surface of the ceiling is sufficiently even, then you can do without plastering works, bringing it to a smooth state with putty, which is able to close small irregularities.

Putty on your own - it's possible!

If you master the basic techniques of plastering technologies, you can solve a bunch of problems when carrying out repairs on your own. Read how it is carried out - a separate article of our portal is devoted to this.

To do the job efficiently, it must be carried out in accordance with all the rules, using a primer with antiseptic properties and a competent selection of waterproof paint, which can be wet cleaned more than once.

For the bathroom ceiling, water-resistant latex, acrylic, silicate and silicone-based paints are used, which meet all the requirements of this room.

Special moisture-resistant latex paint - surfaces painted with it can be wet cleaned

To positive aspects This method of finishing can be attributed to the following points:

• Affordable price for materials.
• Ability to work independently.
• Having leveled the surface of the ceiling once, it will be possible to change the color and, if desired, apply the pattern repeatedly.
• Easy to clean painted surface.
• With high-quality work and properly selected materials, as well as with regular care behind the surface, a painted ceiling can last up to ten years without renewal, unless, of course, emergencies occur in the form of a flood.
• The painted ceiling will suit any interior design of the walls and floor of the room. If desired, it can be applied with paint of the desired shade, in harmony with the finishing material of the walls.
• The ceiling with this finish does not become lower at all, unlike other design methods.

The painted ceiling has its own limitations, many of which are quite fixable:

• The painted ceiling will not retain water at all when flooded from above.
• Over time, spots appear on its surface, or the paint can become very dull, and the white color becomes yellow. However, this problem can be easily solved by refreshing the ceiling on top with a layer of paint of the chosen color.
• A painted ceiling can become exclusive only when applied to it with an original pattern or color gradient - otherwise it will look “just neat”.
• In such a ceiling it will not be possible to mount point lighting. But today on sale you can find at least original lamps, which are attached directly to the ceiling or hung on special brackets.
• If the ceiling processing technology is not followed, mold spots will definitely appear on the painted surface.

With improper surface treatment, along with dampness, its inevitable companions appear - mold spots.

So, the painted ceiling can be called the best option if there is a need to save money or simply at the time of the repair there is no way to purchase more modern version finishes. But, if the surface is maintained in order and updated from time to time, then it can be used for a long time.

PVC panel ceiling

- a relatively new finishing material, and it is most often used specifically for decorating the surfaces of bathrooms or bathrooms. Panels can be mounted in two ways - by fixing them directly to the ceiling with glue, or on a frame crate installed on the ceiling. It can be made from a wooden beam treated with antiseptic impregnations or a galvanized metal profile. The crate is mounted to the ceiling or lowered from it to the desired distance using suspensions.

Most often, the panels are mounted on a grid, since for them to be glued, the ceiling surface must be leveled, which requires a certain time.

If the ceiling in the bathroom is low enough, you can use a bar with a thickness of only 15 ÷ 20 mm for the crate. Then the overall level will drop by only 25 ÷ 30 mm, since the thickness of a plastic lining of 10 mm is sufficient for ceiling cladding.

Plastic panels have many virtues, which determines their wide popularity for finishing bathrooms:

• The installed panels form a moisture-resistant coating, since each of the panels has a groove-thorn lock. In addition, specifically for the accurate installation of the material, fittings are produced that hide the joints of the panels with the walls.

• Installation of this finishing material is quite affordable to do it yourself, even without building skills. It is enough to understand the principle of installing panels and have the necessary simple tools at hand. In addition, the panels are lightweight, so work can be carried out even without an assistant.
• PVC panels differ from other materials in a variety of shades and patterns that can imitate ceramic tiles, wood texture, metal surface etc. Therefore, the finish can be chosen for every taste and color, it is easy to match the overall interior of the bathroom.

• Operation of the coating from plastic lining without loss decorative qualities can last up to 10 years, depending on the quality of the material. Therefore, you should not choose the cheapest options, as they can become stained, fade or change color.
• By mounting the panels on the crate, you can level the curved surface of the ceiling.
• Plastic lining is easy to put in order by simply wiping dry or damp cloth.
• The panels have an affordable price, so even a family with an average income can afford to buy them.
• Despite the low cost, the finish looks quite respectable on the ceiling.

• AT ceiling surface lined with such a clapboard, spotlights can be embedded.

Like any finishing material, PVC panels have several shortcomings. And, although they are minor and quite correctable, they should still be borne in mind:

• If it is planned to embed into the panel structure, it will have to be lowered from the main ceiling by at least 80 ÷ 100 mm. - the distance will depend on the height of the lighting fixtures selected for installation. And this, in turn, means that the ceiling will be much lower than expected by the project.

• In the absence of periodic cleaning, dirty streaks and mold can form on the seams between the panels. Therefore, the cleanliness of the structure must be constantly monitored.
• If the panel ceiling is installed poorly, and at least a small gap is formed at the joints with the wall or between the elements, a favorable environment for mold to form, which will not be visible from the bathroom. It is possible to remove such foci of microflora only by dismantling the panels and putting a lot of effort. Therefore, it is recommended to fill all the resulting gaps with sealant.
• The panel ceiling will not be able to stop the flow of water from above in the event of leaks, so in this case it will have to be dismantled in order to dry the capital surface. You may need to redecorate the whole room.

From the foregoing, we can conclude: a ceiling sheathed with plastic clapboard is a good, affordable option that can make the ceiling neat and aesthetic. It, with proper care, will last a fairly long time, if during its operation there are no emergencies.

Slatted suspended ceiling

The rack version of the ceiling has the same design as the panel one, but it consists of narrow rails made of aluminum, plastic or thin steel. The metal used for the manufacture of rails has a special treatment and does not rust. The details of this ceiling are mounted on the crate in the same way as the plastic lining, but the ceiling decorated by them has a more respectable look. Reiki are produced in a variety of color scheme and can be decorated with drawings or have a metallized coating - gilding or chrome plating.

Virtues this material can be considered as follows:

• Installation of a rack ceiling can be carried out independently, without involving a master in the process. And this means cost savings, which is comparable to the amount paid for the material itself.
• Reiki have a sufficiently high flexibility, which allows you to assemble curvilinear original designs from them.

• Qualitatively installed elements of the ceiling in a single plane make it waterproof and do not let steam from the room to the main ceiling.
• It is easy to care for such a ceiling - it is enough to wipe it regularly with a damp soft cloth and periodically treated with detergents and antiseptics to prevent mold.
• Such a design can be operated, with proper care, from 10 to 12 years.
• The material has more high price compared to PVC lining, but quite affordable and corresponding to its quality. The cost may vary depending on the material of manufacture of the rails.

Such a ceiling has limitations, which are essentially identical negative qualities plastic structures.

The only thing to note is that the slatted ceiling is not suitable for every interior design of the bathroom, therefore, before purchasing it, it is recommended to draw up a sketch of the design of the room in color.

foam boards

The simplest and most affordable and affordable material for installation can be called thin embossed foam boards. Their installation is made on any relatively flat surface using one of the polymer adhesives. The ceiling, decorated with such plates, looks quite neat and is not inferior in aesthetics to the painted options.

One of the simplest and most inexpensive options is foam tiles glued to the ceiling surface.

To positive properties this material, pasted on the ceiling of the bathroom, can be attributed to:

• Sufficiently high moisture resistance of the material.
• Aesthetic and neat appearance of the surface.
• The lightness of the panels and, accordingly, the ease of installation make it possible to carry out the design of the ceiling on their own, even in the absence of experience in this type of work.

• Capital ceiling, decorated foam tiles, practically will not lose in height, since the tile is glued directly to it and has a thickness of only 3 ÷ 5 mm.
• The service life of such a ceiling is small - only 4 ÷ 5 years, this period is consistent with the low price of the material.
• If the tile has a flat surface, then dust and dirt can be easily removed from it.

Negative sides The following factors are considered in this design:

• To make the tiles last longer long term without the appearance of mold under it and in the seams, it is recommended to treat the surface with antiseptic impregnations before sticking it deep penetration which will result in additional costs.
• Spotlights cannot be built into the foam ceiling.
• This material will not retain water when leaking from the upper floor, and in such a situation, the finish will have to be completely replaced.
• Since the ceiling in the bathroom requires frequent cleaning and processing, it is not recommended to choose plates with a deep relief pattern for this room, because it will be quite difficult to clean it from dirty deposits.

This method of finishing can be called an economy option, applicable if it is not possible to purchase and install more expensive material. Such tiles, however, are more suitable for rooms with normal humidity.

Plasterboard ceiling

The ceiling can be decorated with drywall in two ways - by gluing it onto the main base and additionally fixing it to it using “fungus” dowels, or by fixing the material to a wooden or metal frame. But both in the first and in the second case, drywall will require additional decorative coating.

To cover the ceiling in the bathroom, sheets of moisture-resistant drywall are used, which has a higher price than ordinary material, as it has the necessary qualities for installation in a room with high humidity. This type has a green surface color and GKLV marking.

Advantages plasterboard ceiling:

• GKLV material is highly resistant to moisture and mold.
• From drywall, you can make multi-level exclusive designs.
• It is suitable for installation spotlights and hiding various communications - electrical cables and ventilation ducts.
• – great stuff for leveling ceiling planes, which is why it is often called "dry plaster".
• Sheets can be used as the basis for any decorative coatings This creates a smooth and durable surface.
• The service life of such a structure is unlimited, unless emergency situations occur, and subject to regular updating of the finishing layer.

disadvantages plasterboard construction are considered the following points:

• For the manufacture of such a finish, you will have to invite a qualified craftsman, since the installation process is quite complicated, especially if it is planned to install multi-level option ceiling. In addition, it is not easy to finish the finished surface, as it requires treatment with primer solutions and quality coverage putty compounds.
• If you take into account all the materials necessary for such a ceiling, the process will be quite costly.
• Installation of the entire structure, from start to finish, will take a lot of time, especially in cases where the installation is done independently, and experience in this process has not yet been gained.
• The plasterboard ceiling will not be able to retain water in the event of serious leaks on the upper floors, and in such a situation, the sheets of material will have to be replaced.
• The ease of cleaning a plasterboard ceiling will depend on the quality and properties of its exterior finish.

So, neat ceilings are obtained from drywall various designs, which can solve some everyday problems - leveling surfaces, hiding communications, and even insulation or soundproofing the ceiling. But, it is better to mount them in rooms where there is a minimal risk of flooding, otherwise money, effort and time can be wasted.

Tiled honeycomb false ceiling

AT construction stores can be found ready systems from special metal profiles, which are assembled and suspended from the capital base with the help of suspensions. The slabs placed in the created cells of such systems are made of different materials- they are gypsum fiber, glass, mirror, plasterboard, plastic and others.

Such a ceiling has its pros and cons, which you must be aware of when deciding to install such a suspended structure.

To their virtues may include the following:

• By installing such a false ceiling, it is possible to level the capital surface, which has irregularities of any degree, since the hooks on which it is suspended allow you to adjust the height of all sections of the structure ideally in a vertical plane.
• The ceiling allows you to hide various communication elements behind its surface.
• The structure can be used for installation between it and the main surface of insulating or soundproof materials.
• Spotlights, recessed lighting devices or overhead lighting can be embedded in the plates - when choosing frosted plexiglass plates.
• Ceiling elements have a variety of designs, so they can be matched to any room interior.
• The panels are not fixed to the surface of the frame and are removable, so if desired, all or some of them can be removed and, for example, repainted in a different color. In addition, in case of leaks from above, the panels can be temporarily dismantled to dry the ceiling, and if necessary, replaced with new ones using the same metal frame.
• Suspended design gives the ceiling an aesthetic and neat look.

• The service life of the structure is about 10÷12 years.
• Installation of a slab ceiling is simple, so it is quite affordable to do it yourself.
• The complexity of cleaning the surface directly depends on the material of manufacture of the plates.

From shortcomings slab frame ceiling for mounting it in the bathroom, note:

• Such a suspended ceiling will not protect the rest of the decoration in the bathroom from water flows during leaks - it performs exclusively decorative functions.
• Mold will definitely appear in the space between the plates and the main plane of the ceiling, unless additional ventilation is installed in this space.

These are the main disadvantages, knowing about which you can decide whether such a ceiling can be installed in a particular room.

Conclusion: such a ceiling can be installed in the bathroom, but it is not ideal for it. Therefore, choosing it, you need to take into account the above points.

Mirror ceiling

Separately, it is necessary to highlight the mirror ceiling, although it is also mounted according to the principle of a suspended structure. Having decided to install such an option in your bathroom, you need to be prepared for high costs.

Under mirror panels a reinforced metal frame is fixed, and the elements themselves are fixed on it with glue or special fasteners for which holes are drilled.

It should be noted that there are more affordable options for mirrored ceilings - these are plastic panels with an imitation of a mirror coating, they are much easier to install than real plates and much easier to install. Such panels are laid on a lightweight metal frame, described above, but the service life of this option is lower than that of a real mirrored ceiling.

Positive traits mirror design:

Durability with proper installation and care.

• An opportunity to save on electricity, as mirrors will double the power of lighting.
• Exclusive, "rich" design appearance.
• Moisture resistance of the plane, due to the fact that the panels are fixed on the frame crate.

"Minuses" mirrored ceilings:

• Inability to retain water during leaks.
• Complicated surface care. In order for the ceiling to have an impeccable appearance, it must be polished and rubbed to perfect purity, as even slight pollution will be visible on it.
• Installation of this design is recommended to be entrusted to a master with relevant experience.

Before installing such a ceiling, you need to think about how it will affect the psyche of each of the household members, since not everyone is able to withstand such an abundance of mirrors and shine from them.

Stretch ceiling

Probably, it can be called the most ideal option for a bathroom, as it has more positive qualities than negative ones. most significant practical advantage stretch ceiling is its double-sided moisture resistance. It is made of polymeric elastic materials capable of warm air shrink, stretching into a flat canvas.

Stretch ceiling - both beautiful and practical

To benefits stretch ceilings for bathroom before others decorative finishes can safely be attributed to:

• Waterproof material. In case of an emergency in the form of leaks from the upper floors stretch ceiling able to easily collect water on its own inner surface. Thus, the decoration of walls and floors, as well as bathroom accessories, will not be damaged. polymer material can support a weight of 100 kg per square meter.

If a similar situation arises, then you just need to contact the company that installed the ceiling and call the wizard. He will drain the accumulated water and again stretch the stretched material, which has not lost its original qualities from such a “stress”.

• Caring for a stretch ceiling is very simple - you can simply wipe it with a damp cloth, removing the dirt that has appeared on the surface.
• With the help of a stretch ceiling, you can hide all the flaws of the capital base without resorting to leveling it with plaster.
• The material can be stretched as little as 50 mm from interfloor overlap, so it won't "steal" usable space premises
• The design of the stretch ceiling can be chosen for every taste, for any bathroom interior or - design proposals are striking in variety.
• By itself, the stretch ceiling is also a fairly effective barrier against the spread of noise.

Soundproofing problems can be solved with a stretch ceiling!

Moreover, the canvas itself dampens sound waves. The space between it and the ceiling allows you to additionally arrange. How and with what it can be done - in a separate publication of our portal.

If you decide to choose a stretch ceiling for the bathroom, then you need to know about it. shortcomings:

• It is impossible to install a stretch ceiling on your own, since this process requires special equipment and auxiliary materials, as well as high skills in similar technology.
• The ceiling is not resistant to mechanical impact, and its surface is easily damaged by hard or sharp objects. If such an incident occurs, the ceiling will lose its unique qualities retain water.
• A white stretch ceiling may turn yellow over time in areas around the installed ones. It will not work to wash or paint over this flaw, so the canvas will have to be changed completely.

Summarize!

Let's summarize the choice of the type of ceiling for the bathroom according to two main criteria: practical qualities and aesthetic design.

• The first place of reliability and safety of the premises from flooding is occupied by stretch ceilings.

- The second place can be safely given to plastic panels and suspended ceilings:

- Painted ceilings claim the third place, as they are easily restored - the color and pattern on them can be replaced without much difficulty. When wet, the painted surface is always easier to dry than those covered with non-removable panels.

• From an aesthetic point of view, three types of ceilings deserve the first place - these are stretch, slatted, and PVC panel ceilings.

- The second place can be given to the slab version, which also has a variety of design, but, unfortunately, is not suitable for all bathrooms.

- The third place in terms of aesthetics is occupied by plasterboard ceiling, as it is possible to create exclusive complex structures. But from a practical point of view, it is more suitable for dry rooms.

Of course, the aesthetics of one or another version of the ceiling must be determined for himself by the owner of the home, but it must be remembered that the practical side of the finish is always evaluated first.

And, at the end of the publication, the reader is invited to a video with tips on choosing a ceiling for the bathroom.

Video: which ceiling is more suitable for the bathroom?

/ How and from what to make a ceiling in the shower?

How and from what to make a ceiling in the shower?

Floor finishing can be done different ways, depending on what specific room is to be designed. Special attention deserves roof repairs wet rooms such as bathroom and shower room. It will require the most water-resistant coatings, since not only moisture from the air, but also just drops of water will get on the ceiling in the shower room.

What will fit

A lot will depend on the type of building in which the decoration is made. For example, the ceiling in the shower room of an ordinary apartment or house is made with standard moisture-resistant coatings, and in the bath you will also need to use their heat-resistant varieties, since the air temperature here can be high even in the washing department. In general, the best options would be:

• Panels and structures made of plastic or metal. Moreover, the former are suitable for ordinary premises, and metal parts are best used where high temperatures are possible, since plastic can be deformed.
• The same can be said about PVC films - such a stretch ceiling will be an excellent solution for a bathroom or shower room in an apartment, but it is not suitable for finishing baths.
• Simple painting with water-resistant coatings. This is the ultimate budget solution, if plane alignment is not required.
• Waterproof construction. Here you need to pay special attention to the distance to the plane of the ceiling, since even its waterproof variety does not tolerate direct contact with water.
• . Few people think about such a design of the bathroom, and even more so - a room with a shower.

Panels

The main nuance of using this design will be to reduce the height of the room. For the installation of panel structures, you will need to assemble special frame or a crate on which the coating will hold. Therefore, the height of the walls will decrease by the dimensions of this frame. In addition, on the surface there will be a clearly distinguishable geometric pattern, formed by the joints of adjacent parts.

Stretch fabric

The film will definitely not the best option for registration of washing in baths. Under influence high temperature it may sag or creases may form on the plane. In addition, this building is heated only at those moments when the bath itself is heated, and in winter time year, if it is not heated, it can be very cold here, which will adversely affect the appearance of the PVC film. For standard apartments or private houses, tension structures can be an ideal solution for decorating bathrooms, besides, they are also too expensive.

Painting

In order to use this method of repairing floors, it is necessary that they be very even initially. In this case, painting will be the most in an inexpensive way give a shower beautiful view. If the floors are not too smooth or have noticeable defects on the surface, they will have to be leveled, which is very expensive if you hire a craftsman and quite a long time if you do everything yourself.

GKL

A great way to make your bathroom ceilings even and beautiful, but that requires some sacrifice. Basically, you will have to sacrifice the height of the walls. Another nuance is moisture. Even a special type of drywall may not withstand constant contact with water and warp. Therefore, any structures made of it must be additionally protected with an appropriate primer and painted with special paints.

Cork

Pretty pretty and universal option. It can be glued to any surface, including those exposed to moisture. There are two nuances: the appearance of the plates should match the rest of the design, the premises and the cork cloth should be glued with waterproof glue. In addition, with the constant ingress of drops on the surface of the cork, dark spots and divorces. To avoid this, you need to choose a laminated variety of cork boards. They are well protected from external influences thin layer films on the outer surface.

Repair of a sanitary room is a long and responsible process that requires significant financial investments, as well as attention to every detail. By choosing expensive building materials, homeowners can expect finishes to last longer.

In the bathroom, ceilings are exposed to many negative factors: temperature changes, hot steam, high humidity, intense pore formation. Therefore, during the repair, the question of how to finish the ceiling in the bathroom is considered relevant. This article will tell you how to choose the right materials for cladding, describe popular finishes.

The microclimate of the bathroom

Ceilings in the bathroom are subjected to significant stress due to difficult conditions use, which are stacked inside this sanitary premise. High humidity, steam, condensation and other negative phenomena lead to the fact that the materials lose their aesthetic appearance and wear out faster. Walls lined with ceramic tiles last at least 15 years, so the ceiling finish in the bathroom should be preserved no less.

The microclimate of this room consists of the following factors:

Note! When deciding which ceiling to make, pay attention to moisture-resistant materials or options with hydrophobic impregnation that are resistant to high humidity, temperature changes, fungus or mold activity.

Finishing Requirements

Given the complexity of the microclimate of sanitary facilities, bathroom ceilings are made from specially designed, sustainable materials. Constant exposure to moist, hot steam, possible direct contact with water, high humidity air and condensate lead to deterioration of materials not intended for installation inside this room. When deciding which ceiling to make in the bathroom, choose options that meet the following requirements:

Important! Deciding what to choose for finishing the ceiling in the bathroom, professional craftsmen use materials that are quickly mounted. The choice is influenced by the volume preparatory work, which requires a ceiling in the bathroom. Some options involve extensive preparation with leveling, puttying and priming the surface, while others are even mounted on top of the old ceiling covering.

Finishes

Modern Decoration Materials leave a wide choice of ceilings for the bathroom. With them, you can create variety of options cladding, corresponding to the idea of ​​the designer and the style of the interior of the room. The choice of finish depends on the condition of the ceiling in the bath, the type of wall cladding, as well as the preferences and financial capabilities of the customer. In terms of design, bathroom ceilings are divided into the following types:

Please note that the possibility of one or another option for finishing the ceiling in the bath depends on the height and area of ​​\u200b\u200bthe room. Inside bathrooms with small dimensions, it makes no sense to make massive ceiling structures with several tiers, a frame. Big square and the height of the room allows the use of figured bunk options made of moisture-resistant drywall or tension technologies that hide 10-15 cm centimeters free space. Painting or tiling is considered the best option for rooms with low ceilings.

Finishing methods

When deciding which ceiling to make in the bathroom, it's hard not to get confused because of the variety of technologies and materials. Choice the best option depends on the condition of the surface to be finished, the height and area of ​​the room, but the main factors are the stylistic preferences and financial capabilities of the customer. For lining the ceiling in the bath, there are the following options:

Important! All materials used to create ceiling structures, are highly resistant to water, so any of the listed options will last at least 15 years. The painted surface is used a little less, it has a “shelf life” of 8-10 years.

Video instruction

When carrying out repairs in the bathroom, the question often arises of which ceiling to make. Everyone wants the ceiling to be not only beautiful, but also durable. What characteristics should you pay attention to and which one is better to choose for a bathroom?

The bathroom is a room in which humidity is constantly increased, so it is important that all materials are waterproof. If the rain accidentally hits, then he should normally endure this as well. Also, the ceiling must withstand the pressure of water, which may arise from above. This can happen in case of flooding.

It is very good if he does not need special care. The ideal surface is one that can be simply wiped with a cloth. After all, it is inconvenient to take some enhanced measures to clean the ceiling in the bathroom.

And, of course, a beautiful canvas that fits well into the interior of the room should please the eyes of the household.

Depending on these conditions, you need to choose the right ceiling. There are several types of ceiling finishes in the bathroom:

• whitewashing or painting the ceiling;
• plastic from panels;
• rack or metal;
• suspension;
• from drywall;
• modular mirror;
• tension.

The video tells which ceiling to choose in the bathroom:

Puttying or painting

Whitewashing the ceiling is considered the most cost-effective way to finish. Such a ceiling can be easily finished on your own.

To work, you need to take a roller and whitewash or paint. If the ceiling is not very even, then it can be leveled with putty. Moreover, all purchased materials must be only waterproof. If you see that the irregularities on the ceiling are too large, then it is better to abandon the idea of ​​\u200b\u200bcovering the surface with putty, choose a different finishing method.

Here are the features it has, finished with putty:

• monophonic looks simple and primitive, you can add zest by mixing different type colors;
• if the materials you bought are of high quality, then the life of the ceiling will be about 5 years;
• It quickly absorbs dirt, but you can refresh it a little with a new layer of whitewash;
• it will not be possible to decorate the surface with lamps, it is better to do it on the walls of the bathroom, it will also look attractive;
• it is impossible to remove the running communications under it, but if a breakdown occurs, then it does not need to be disassembled;
• any painted surfaces in the bathroom are a good breeding ground for mold and mildew.

Water-based paint will look better than all other options on the ceiling.

Types of ceiling

plastic panel

Plastic panels - excellent inexpensive option for finishing the ceiling in the bathroom. It is more expensive than the previous method, but it also has more advantages..

1. The panels are attractive.
2. Additional finishing is not required.
3. You can mount it with your own hands.
4. Careful maintenance is not required.
5. Allows you to mount additional lighting.
6. All irregularities in the ceiling will be hidden.
7. Possibility to mount communications.

On the video - ceilings in the bathroom made of plastic panels:

This type of coverage also has its drawbacks:

1. Seams will form between the plastic panels, which can then become clogged with dirt. After cleaning, you can give the ceiling its original appearance. But if the bathroom is poorly ventilated, then fungus and mold can begin to develop in the resulting seams.
2. The metal frame is rusty. It is on it that the plastic panels are attached.
3. If you want to dismantle it, then you need to carry out a number of complex works.

It is worth noting that wooden beams can be used as a frame. But before that, the bars need to be well processed so that they are resistant to high humidity.

rack or metal

This type of ceiling is similar to the previous view. Long narrow slats are attached to the frame. Rails are made of plastic, aluminum or steel. Aluminum rails do not corrode. The color of the rails can be the most varied and even with a pattern. It is assembled from the rails as a designer, and there is practically no need to care for the surface.

Reiki is a fairly plastic and flexible material, so it can be made tortuous. Often the slats are very highly polished, so it looks like a mirror surface.

Reiki can be divided into three types:

1. Open view of rails. There are large gaps between the rails. This type is usually used if the ceiling height is more than 5 meters.
2. closed type. Outwardly, it is very similar to the lining.
3. Open rail type with one caveat: all the empty space is covered with special inserts.

A quality product must be protective film which the fakes don't have. Main disadvantage slatted ceilings- Rapid contamination.

The video shows how to make a ceiling in the bathroom:

Suspension

It is such a ceiling system consisting of metal frame and panels square shape. Standard size panels 60 by 60 cm. What can plates be made of? Weight options: plastic, polystyrene foam, fiberglass, mineral fiber, aluminum, steel. But when choosing any type of material, be sure to look at what degree of moisture resistance the material has. It should not be lower than 95%. But if the bathroom has good ventilation and airing, then the coefficient may be less.

A big plus of such ceilings is that you can hide all communications. But there is a drawback: during installation, you will have to hide about 10-15 cm of ceiling height.

On the video - suspended ceilings in the bathroom:

Drywall

Often a false ceiling is made of drywall. It is worth considering that drywall will be quite expensive. But it's worth it, because he is able to remove all surface irregularities. Before starting installation, consider the following nuances:

1. The material must be moisture resistant and impregnated with special substances that reduce the risk of fungus. Usually such material has a green color and a special marking.
2. Drywall requires good ventilation both from above and throughout the room.
3. It is better to take care of the hydrobarrier. The grooves that are made on the sides prevent moisture from entering the ceiling.

The suspended ceiling can be made multi-level, which will add zest to the room. You can also mount different kind lighting. Wiring can also be hidden under the ceiling. The service life of this type of ceiling is from 5 to 10 years.
On the photo-ceiling in the bathroom of plasterboard:

Mirrored

Mirrored ceiling refers to modular systems. Usually such ceilings are easy to manufacture. All plates are ready for installation. Additional staining or processing is not required. Before installing such a ceiling, you need to think carefully about whether it will fit into your bathroom. Usually from such a ceiling system it exudes formality and coldness. Comfort and warmth - such concepts have little to do with mirrored ceilings.

Mirror tiles are the most expensive option. For installation, a reinforced frame will also be required. Mounting the ceiling yourself will not work. Certain skills are required. In the care of such ceilings are quite difficult, you need to wipe each mirror tiles separately, and polish it. Instead of expensive mirrors, you can use plastic panels. But the service life of such a structure is much lower.

On the video - a mirrored ceiling in the bathroom:

Stretch

Currently, the most common way to finish the ceiling is to use PVC film. The manufacturer of PVC film, which is used for stretching, says that it is able to hold a load of 100 kg per 1 square meter. Such a ceiling has many more advantages:

• resistant to moisture;
• mold is not terrible for such a coating;
• the ceiling can be operated for at least 10 years;
• the surface can be cleaned using special cleaning products;
• the material does not emit toxins;
• very large range of colors;
• the surface can be matte, glossy, fabric;

In the process of installation under the ceiling, it will take only 3 cm in height. But this is provided that you do not need to mount additional system illumination. To install a stretch ceiling, you need to hire a specialist. The surface of the ceiling must not be subjected to overheating to avoid melting. Consider this when choosing the power of lamps built into the ceiling.

If white was chosen as the color of the PVC film, then be prepared for the fact that yellow spots which are difficult to wash. In this case, a complete replacement of the film is necessary. And this is an additional cost.

On the video - stretch ceiling in the bathroom:

How to choose the best

You can approach the choice of ceiling for the bathroom based on two points of view: design and practical.

From a design point of view, you have to think about how a certain kind of surface will fit into the interior. A white, smooth, even ceiling will fit well into any design, no matter what material it is made of. BUT perfect option for the bathroom - a black floor and a white ceiling.

In the case of textured ceilings, you can experiment with the dimensions of the bathroom. Visually, you can narrow, expand the room, make the ceilings higher or lower. This can be achieved using rack, modular, tiled type of ceiling.

If the bathroom is large, then multi-level ceilings drywall works well for her. Based on a practical point of view, the first place here is occupied by PVC panels. This cover is ideal for the bathroom. The material is durable, beautiful and practical.

On the video - reviews on which ceiling to choose in the bathroom: