Pandora burglar alarm user manual. Remote Engine Start - Pandora DXL3300 User Manual. Installing the shock sensor

Pandora and Pandect car alarms, developed and produced by the Kaluga NPO Telemetry since 2004, are considered one of the best representatives of their class: initially, maximum technical excellence was chosen as the main vector for product development. Back in the days when the use of primitive Microchip / Atmel controllers was the norm for top-end alarms, Pandora alarms already “flaunted” high-performance ARM Cortex controllers, which made it possible to expand the functionality and security of security systems.

But this also had a downside - Pandora alarms were created under professional installation, and it is difficult to call them “user friendly” in terms of settings. The power of the controllers made it possible to easily implement programming on them via a USB port without additional tricks. No wonder one of the signs of the installed Pandora is a hidden USB connector of incomprehensible purpose - with its help, the installer set up the system.

An auto electrician-diagnostician, a certified StarLine specialist, works on the site. If you have questions about car alarms, ask them at the end of the article in the comments or Vkontakte.

New Pandora alarm models with auto start

For high-level alarms, autostart support is the norm, so it's not surprising that most Pandora systems on the market now allow the owner to remotely start the engine. Moreover, their advantage is the support for cloning the chips of a standard immobilizer by means of signaling without additional crawlers thanks to the multifunctional IMMO-KEY port.

Ways to manage autorun:

For systems with a classic radio key fob: from buttons.
For systems with telematics support: via SMS, voice menu, mobile application.
For slave systems: from a regular radio key (the car must initially support this method of starting).

Video: Instructions for working with the Pandora alarm key fob.

Setting up systems via Pandora DXL Loader

This program is designed to set up Pandora systems of the LX and DXL families. The last release of the program was released in 2014, "fresh" series of alarms are configured through Pandora Alarm Studio.
The program is designed for direct connection of a laptop to the central alarm unit via USB. After connecting, set the desired settings, and they are provided with clear descriptions and are grouped logically.

Autorun is configured in the interface group of the same name.

To enable autostart on Pandora, switch the setting II-1.1 from the factory setting "Disabled" to "Enabled", activate periodic autostart and autostart by voltage.
Program group II-2 sets additional autorun settings:

No explanation is required here, the daily start time, the battery voltage threshold and the duration of the motor are set arbitrarily as desired.
Click the "Record" button at the bottom of the screen.

In more advanced alarm models, the choice of autorun settings is much richer.

The differences of this program are support for Bluetooth connection and work with a proprietary server that provides CLONE technology (creation of a software copy of a standard immobilizer chip).
However, this program is already more complicated and, being intended for branded installation centers, will require registration. The simplest registration without confirmation of your work with the official Pandora partner is possible, but ...

Autostart management

Key fob auto-start (if the system is already configured to work with auto-start) is simple: to force start, press and hold the arming button. On vehicles with manual transmission, the “software neutral” procedure is performed before this, either hard-coded in the alarm program or configured through the DXL Loader. For Pandora DXL 5910, you can disable or enable the start of program neutral by the handbrake, and end by closing the driver's door.

Autostart from the phone (old Pandora models that do not support working with a mobile application) perform by calling the number of the SIM card installed in the alarm and dialing the commands 123 * in tone mode. If the motor is already running at this time, the countdown timer will be reset. The 321* commands are used to stop the motor.
Set the periodic start parameters from the key fob through the menu:

Autostart by temperature is configured here as follows:

at step 3, turn on autostart when the temperature drops below the threshold: S°On;
at step 4 we set this threshold;
in step 5, set the warm-up time.

Autostart to maintain engine temperature is configured as follows:

at step 6, turn on periodic heating: SdOn;
at step 7, turn on automatic mute: P°On;
at step 8, we set the engine temperature, upon reaching which the engine will be turned off.

Autostart settings through the voice menu are performed in two ways - you can either hold the disarm button on the key fob for 3 seconds after the system answers the call, or turn the ignition on for 1-3 seconds and turn off the ignition. Next, 6* commands are entered in the voice menu, after which the desired item is selected:

1* — autorun by time;
2* — autorun time setting;
3* - autostart by voltage;
4* - setting the autorun threshold voltage;
5* - auto start by temperature;
6* - setting the autostart temperature;
7* - periodic start;
8* - setting the start period.

Please note that the settings here do not exactly duplicate those available from the key fob - the frequency of launches is set from the phone, but you cannot limit the warm-up time by temperature.

It is not difficult to start the engine from a mobile phone (the Start Engine button occupies a considerable area of the screen), and make the necessary settings.

Troubleshooting

If autorun does not work, then contact the installation center. Pandora systems (unlike the same StarLine, for example) are deliberately deprived of the possibility of easy user access to the settings of the system itself, so you can even check them only on LX / DXL systems, only if you have a laptop and only if you have saved after installation cord for programming.

If you get to central block, connect to it, and in the case of modern systems– and you have an authorized installer account to work with Alarm Studio, then you are unlikely to need articles from the Internet for diagnostics, right?

Russian manufacturers of security automotive systems not far behind the leading leaders in this market. Alarm Pandora produced at the Kaluga Experimental Instrumentation Plant according to all technical requirements that are exhibited for this product. Thanks to this, the Pandora car alarm occupies a leading position in our market, having a number of advantages and innovations, which will be discussed below.

General specifications

After the appearance of this security system on the market in 2004, it won many fans, so the Pandora car alarm is installed on many domestic and foreign cars.

The manufacturer is constantly improving its development, so new varieties (models) of such a security system appear on the market, and this suggests that professional car thieves find it harder to get hold of a car that is equipped with pandora. Therefore, many motorists prefer it to her.

Main specifications such car alarm the following:

two-channel coded signal, this indicates that this signaling keeps in touch with the driver with two communication channels protected from reading, various devices and scanners;
does not have removable tires, that is, the installation of the Pandora alarm is easy, without additional connecting wires that can be noticed by persons who have entered the car;
easy installation, the user manual contains a detailed diagram for connecting the unit, sensors, so even a person who is poorly versed in the car device can install it;
satellite connection via GSM system , installed block inside the car can track the location of the car in case of illegal possession, like a jaguar alarm;
autostart of the engine in various modes, the ability to start the motor with a key fob in automatic mode, with certain temperature environment, or low battery;
use of this machine safety system at different temperatures, testing of this system took place at low and high ambient temperatures, therefore this alarm suitable for the northern and southern regions of not only our country, but also the CIS countries;
diversity model range , the manufacturer focuses its security systems on different customers, so product prices are slightly lower compared to other security systems, for example, mongoose;
online communication with the owner of the car, the function of some models contains a function with feedback across mobile phone(smartphone) of a car enthusiast, that is, all current information about the state of the car can be displayed on the screen;
the ability to reprogram some functions, for the convenience of motorists, the manufacturer has developed the possibility of individual settings for this alarm, which are contained in the operating instructions for each model.

These are the main advantages of this security anti-theft alarm. User reviews also indicate that the system is reliable, with few failures even under extreme operating conditions.

On the forums, some motorists ask the question of how to recognize the model by the key fob. Make it simple. You need to look at the key fob screen, what symbols are on it. Depending on their number and it is possible to determine the models, which will be discussed below, that is, their description is given.

Model range of the alarm system

The manufacturer has provided many models of this anti-theft system.

Pandora DeLux system. The flagship of the models related to this modification is the pandora dx 50, 1870 i car alarm. dx50, like 1870 i, has a reinforced key fob body, the ability to auto-start the motor, operation in difficult weather conditions and radio interference, communication between the key fob and the main unit occurs through several secure signal channels. Model 1870 i, the instruction of which contains the possibility of programming the autostart time of the power unit, is characterized by the fact that it can be installed on expensive cars.
Pandora DXL system. These include signaling DXL 3000, 5000, 5000nev, 3950, 3210, 391
In these models, there are such functions as data transmission over two secure channels (readout protection), the ability to monitor the car via a smartphone (a special wireless bus is used for this), the presence of dialog encoding of the received signal, remote control of some car functions (autostart, turning on interior lighting). Model 3000, the instruction of which provides for the possibility of installing additional shock sensors, as well as reprogramming the engine start function based on the ambient temperature, has found application in the northern regions. The instruction manual allows you to install such a security system yourself, without the involvement of specialists.
Anti-theft alarm LX 3055, 3297, 3257 and others, are characterized by the fact that they do not have wired connections, the function of monitoring the car via satellite, and the ability to turn off the engine when the car is moving. The instruction manual allows you to install additional sensors.

Also, for all these models, the manufacturer recommends various sensors on movement (if the car is pushed or loaded onto a tow truck), buildup, impact. You can use this security system even in conditions of high vibration, as well as noise (for example, thunder) since it does not react to this, and is only triggered by direct impact on the car by unauthorized persons.

Installation additional equipment does not affect the operation of Pandora, so you should not worry about this. It will remain as reliable as in the original configuration.

It is important to remember that these anti-theft alarms are designed for all CIS countries, so the user manual is compiled in the language where the system will be used.

Pandora car alarms have many technical innovations that allow them to compete with other security systems, while the manufacturer retains acceptable price. They are effectively used on new and used cars, up to the luxury class.

The acquisition of a new car, especially an expensive and prestigious one, in addition to undeniable joy, brings great amount troubles and new responsibilities. In addition to taking out insurance, you need to take care of reliable protection vehicle from theft. To do this, it is not enough to have a reliable garage or constantly leave the car exclusively in guarded parking lots - you cannot do without a reliable security complex.

At the same time, when it is no secret to anyone that expensive and prestigious cars are stolen, as a rule, to order, and the level of technical equipment of criminals is incredibly high, car alarms must meet the highest standards of safety and reliability. As one of the best, you can consider the Pandora alarm, reviews of which very eloquently speak of its exceptional quality and high level of vehicle protection.

Important! The installation of the alarm must be trusted only to specialists from large service centers with an impeccable reputation - otherwise it is difficult to guarantee the safety of the car.

The main features of the car security complex

As the basic functions that the Pandora alarm has, it should be called independent control over the following areas:

car doors;
trunk and hood trailers;
starting the ignition system;
shock sensor signals;
release of the brake;
the value of the voltage in the car's electrical network;
triggering of a two-level motion (position) sensor.

About any incidents and triggering of security sensors, a signal is automatically sent to the Pandora alarm keychain, and a record of the event is stored in the memory of the main unit of the system. It is noteworthy that the Pandora auto-start alarm system is an exclusively domestic development, so it is ideally suited for operation in the difficult climatic conditions of our country.

In addition, it implements so a large number of newest, innovative developments that it is not inferior to the security systems that are equipped with all modern luxury-class cars. Depending on the specific modification burglar alarm Pandora, it can be equipped with key fobs for two-way communication via a radio channel, a GSM module, immobilizer tags, in the absence of which the movement of a car is impossible. The possibility of integration into the GPS / GLONASS system of the module is also provided, which allows you to provide the vehicle with the maximum level of protection. satellite signaling Pandora will allow you to quickly detect a car even when it is in underground parking lots, as well as independently track its location using the appropriate Internet services, access to which will be possible after connecting the appropriate package.

Budget option for maximum protection of a modern car

A fairly affordable option for its cost is the Pandora DXL 3500 alarm, suitable for almost any vehicle of domestic and foreign production.

This modification of the Pandora alarm, according to the instructions, is a security system belonging to the premium segment that supports dialog coding and equipped with a multi-channel radio path. After installation, Pandora DXL 3500 controlled by the existing CAN bus in an auto multi-threaded way, and its main unit is easily programmed through the available USB port. This security complex is based on a 32-bit controller with an ARM/Cortex core.

As a result, we managed to create a truly reliable security system, which is almost impossible to crack - the dialog signal encoding algorithm here is distinguished by the highest cryptographic strength. It is worth noting the mathematical way of decoding the signal coming from the ultra-sensitive three-coordinate accelerometer, on the basis of which all sensors work (shock / motion / tilt) - this guarantees the highest degree protection against false alarms. The main distinguishing features of this complex are the following:

built-in integrated CAN module and LIN-port, allowing you to install this alarm on almost any car;
low power consumption;
constant monitoring of the communication channel and protection from "jammers";
double PIN system;
11 independent protection zones;
availability of additional 10 channels for quick connection additional modules, for example, GLONASS, GSM, etc.;
gradual unlocking of doors, remote activation headlights, opening windows, starting the engine.

Important! When installing the Pandora dxl alarm in accordance with the instruction manual, it will not interfere with the operation of the standard vehicle electronics, and repair of the Pandora alarm will not be required throughout its entire service life.

Alarm for those who do not need a keychain

Practice shows that the Pandora alarm, installed in accordance with the instruction manual, is suitable for any car - both domestic and imported. One of the most budgetary is the Pandora 3910 alarm, which, nevertheless, provides a high level of car protection. This version of the security complex has several control options:

car owner's smartphone;
special immobilizer tags;
separate Internet service;
vehicle key.

The fact that there is no remote control in the Pandora 3910 alarm system, according to car owners, does not in any way limit the functionality of the system, and allows you to get rid of a rather large “add-on” that you will need to constantly carry with you.

A smartphone, which almost every person keeps with him all the time, in this case will be an almost ideal alarm control device. The undoubted advantage of such a "remote control" is the fact that you can control the abandoned car at any distance from it. Using a smartphone, it is easy to control the temperature of the engine or interior, receive real-time information about the voltage value in the on-board network, send commands to autostart or turn on preheater. Besides, you can optionally install a GPS module, which will make it possible to always have the exact coordinates of your car.

The management process can be carried out both by making calls to the system number, or by installing a special mobile application on the smartphone, available for iOS and Android platforms. The Pandora 3910 alarm system can be installed on any car. In the presence of digital bus this can be done using the CAN or 2CAN bus, and in the absence of a "digit", the alarm can be set by analogy. The presence in this modification of special labels, which must be constantly with the driver, allows the immobilizer to recognize "its own" and not block the car engine.

Military technology to protect civilian vehicles

The most advanced security system for a car can be considered a Pandora 5000 alarm with auto start. The maximum degree of vehicle protection is ensured by the use of a proprietary dialogue code - this encryption technology is used in the military aviation of our country. The Pandora 5000 new alarm system cannot be hacked using a code grabber (not a single such case has been recorded), it is also impossible to “interfere” in the communication process between the blocks of the complex, since 128-bit AES encryption is used here.

Installing a Pandora 5000 alarm will require minimal "parsing" inner lining car, since its main units "communicate" with each other via a secure wireless communication channel. Special attention deserves the main Pandora car alarm keychain - it is equipped with an LCD display, it has the ability to set different melodies for each event, allows you to control 12 zones protection at the same time and adjust the sensitivity of the sensors, displays the current temperature and status battery car. Naturally, the Pandora alarm is equipped with instructions for using the key fob.

The innovative (digital) Pandora car alarm interface allows you to connect directly to 2 digital vehicle buses. Unlike previous versions of the complex, Pandora 5000 new has a more advanced non-volatile memory unit, and the overall power consumption has been reduced to a minimum. This complex has a built-in GSM module and the ability to integrate GLONASS/GPS receivers into the system. Installing the Pandora alarm system allows you to control online such parameters of the car in your personal account as:

its location;
cabin temperature;
parameters of the power supply system;
include "wiretapping" in the cabin;
keep track of the places and number of gas stations.

Despite the presence of a convenient key fob in the Pandora DXL 5000 alarm system, you can control the entire system through a smartphone, just install a specially designed mobile application on it, which you can download on the official website for iOS and Android devices, and you can watch the system control process on the video:

In addition to the fact that Pandora alarm control via a smartphone has no range restrictions, it will be indispensable if it turns out that the key fob does not work (for example, the battery has run out). The mobile phone screen displays all the current information about the state of the car, and the owner can give absolutely any supported commands, for example, remotely start the engine or turn on the air conditioner. This security complex has two additional immobilizer tags as standard, which allow you to unlock the car in Hands Free mode. Their use will prevent such a situation when the driver is simply thrown out of the running car - the tag remains with him, and the car's immobilizer, having stopped receiving a signal from it, will simply block the engine.

Pandora alarm with auto start created Russian specialists using high-precision equipment for element installation and control. This allowed the manufacturer to obtain a quality product that effectively protects the car from hacking and theft. The Pandora 3910 user manual explains in detail how to perform self-assembly and system setup.

[ Hide ]

Description and equipment

The Pandora DXL Pro car alarm is a premium anti-theft system. It is designed specifically for installation on machines of class B, C, D

Complete set of "signaling" with auto start:

A set of wires that will ensure the connection of all modules and devices of the complex.
Diode indicator. It shows the status of the car alarm.
Temperature sensor. With it, you can connect and configure the option to automatically start the motor by temperature.
Service mode button Valet. After its activation, the system will work in an emergency state. This will turn off the alarm and configure the key fobs.
USB cable for connection.
Labels designed to identify the car owner.
Auxiliary controller plug with wiring.
Case for installing labels in it.
Limit switch.
A special block designed to implement the autorun option.
GSM module.
The microphone used to listen in on the cabin.
A set of ties for connecting and fixing electrical circuits.
Main and additional control.
User manual for installation and operation of the complex.

The Stal63 channel reviewed the work of the security complex on the Toyota Camry Car.

Main functions and features

The main features of the complex:

the presence of an integrated GSM interface, data transmission is carried out via a 900/1800 MHz channel;
the possibility of simultaneous operation of the complex with two digital buses;
it is allowed to connect tires K-Line, LIN, P-Plus, K-Bas, V-Bas;
a multifunctional interface is used to transmit pulses;
data transfer between the tags and the complex is carried out at a frequency of 2.4 GHz;
16 security zones operating independently of each other;
sensitivity, movement and impact controllers will allow you to record unauthorized entry into the car interior;
individual is used for data transmission. dialog code encryption;
for emergency arming and disarming, another individual code is used;
thanks to the USB output, the car owner can adjust the parameters installed system when connected to a port;
the package includes a five-channel autorun unit, which allows you to configure and activate the system for starting and controlling the power unit;
the presence of a digital bus allows you to customize the control of the preheating system with your own hands;
remote start of the motor can be configured by a command sent from a smartphone on which a mobile application is installed;
you can set the start of the motor by a timer, air temperature, at a set time or when the voltage in the on-board network decreases;
it is possible to control the main functions of the complex using a mobile gadget;
wiretapping of the salon, as well as the ability to listen to the events that took place by phone;
the presence of the option of remote blocking of the motor;
it is allowed to implement the function of obtaining the coordinates of the location of the car, we are talking about both the current coordinates and the data sent to the phone from the alarm memory;
another feature is the ability to notify the car owner through sound and SMS messages;
the ability to configure controllers using mobile devices;
economical power consumption will prevent the discharge of a dead battery.

Controlled zones

When the security mode is activated, the complex will control several zones:

touch controllers;
car door locks;
the motion controller protects the interior from hacking;
limit switches will protect the hood, as well as the luggage compartment from breaking;
the system controls the voltage level in the on-board network of the car and warns the car owner about the decrease in the parameter;
the security complex controls the braking system;
car alarm monitors the operation of the ignition system.

Andrey Popov showed how the Pandora 3910 security system installed on a Hyundai Taxon car works.

Advantages and disadvantages

The list of advantages and disadvantages was created based on consumer feedback, let's start with the pros:

The presence of auto start allows the car owner to get into the already warmed up car interior, which is especially important for the winter season.
Effective machine protection. Many users scold the system only because it was created in Russia. Despite this, the security complex does an excellent job with its duties even with critical low temperatures. The system consists of many devices and elements that provide protection at different levels.
The presence of a GSM-module will allow, if necessary, to determine the coordinates of the car, if there has been a break-in and theft of the vehicle.
Using the built-in microphone, the owner of the car can at any time find out what is happening in the car.
The presence of a clear manual will allow the car owner to independently adjust the main parameters of the system.

Difficulty of installation. If you can set up the system yourself, then with the installation the situation is different. In the case when you do not have the skills and experience, it is better to entrust this task to specialists.
Reviews show that the key fob often fails in this model of the complex. If the remote control is working, then you need to change the battery. In a situation where this did not help, you will have to check and repair the remote control.
High price. Due to the use of high-tech solutions in production, the cost of the complex will not be small.

How to install?

To connect the system, use the diagram, which is in the Pandora 3910 instruction manual.

General scheme connections part 1 General wiring diagram part 2

The installation procedure is as follows:

Open the hood and disconnect the battery terminal. To disconnect the negative terminal, you will need wrench loosen the bolt securing the clamp. Then the terminal is removed to the side.
Remove the instrument panel. Depending on the model of car, the procedure may differ. To remove the facing elements, unscrew the bolts and dismantle the upholstery. Remove the dashboard carefully, disconnecting all connectors with wires from it. Right behind the tidy you will see a CAN bus, the security complex's electrical circuits are connected to it. The OBD diagnostic connector is connected to the bus, power wires, fuel gauge and other components.
Then the lower part of the center console is dismantled. Behind the dashboard is a leg lighting system.
When open access to the OBD connector is obtained, the digital bus must be connected.
The installation of the main module of the system is in progress. It must be installed so that, if necessary, the car owner has access to the device, but the attacker could not find it. We recommend installing the device in free space behind dashboard. Alternatively, you can put the block behind the glove compartment, under the seat or behind the ashtray, if there is free space. Do not install under the dashboard near the hood release lever. Mount the device and fix it securely in place. To exclude the effect of vibrations on the module, it can be additionally wrapped in foam rubber.
The service button is recommended to be installed in a place inaccessible to criminals. In this case, the user must have access to this element from the driver's seat.
The transceiver is installed inside the car. It is better to install it as high as possible to ensure high-quality signal reception and transmission. The antenna adapter must not be near metal objects, their presence will lead to the fact that the signal quality will be weak, interference will occur.
Shock, tilt and motion sensors are mounted in the cabin. The installation location should be selected in accordance with the manufacturer's recommendations. The sensitivity controller is preferably located in the central part of the body. Often it is placed on a partition separating the engine compartment and the passenger compartment. When installing the sensor, do not place a plastic gasket under the device, as its presence will cause an alarm to go off for no reason.
Limit switches are installed on the doors, luggage compartment and hood. Connecting devices to the control module is carried out in accordance with the diagram.

The Auto Install channel showed the result of installing the 3910 security complex on a Mazda CX-5 car.

How to enter system programming mode?

Self-programming of the 3910 by car owners is not approved by the manufacturer, since this procedure is quite complicated and can make serious changes to the factory configuration.

Programming can be done in several ways:

using the service mode key Valet;
via laptop and software;
using a smartphone on which you must first install the mobile application.

To use the service button, the car owner must know the password. Initially, the complex is assigned code 1111. To program the system, open the doors and press the Valet key four times, between each click you must pause for one second. When the buttons are pressed quickly, the complex will perceive these actions as a double or triple click. If each digit of the password is entered correctly, the LED indicator will blink once. If the light flashes four times, it means that you have successfully entered the setup mode.

If you want to use a computer for setup, you must first download the DXL Loader application to it. The laptop is connected to the system via a mini-USB cable. After launch software enter the password to enter the programming mode. After programming, you just need to turn off the ignition, this will save the configuration.

The user BaronKorf spoke about the features of the mobile application, as well as the monitoring web resource from Pandora.

User manual

What you need to know about the use of "signals":

Activation and deactivation of the armed mode can be performed using the button on the remote control. To implement the function, the car owner must be within the range of the system, which is about five meters in the range of the car. Press the button on the key fob, after which the complex will start encrypted data exchange between the device and the control unit. Information will be transmitted through one of 125 channels.
To turn on security mode with activated option Free hands, it is necessary to deactivate the ignition in the car and move away with the tag remote control at a distance of about ten meters. When the complex detects the distance of the tag from the transceiver, the security mode will turn on automatically. To deactivate the protection, you just need to approach the car. The control module will detect the approach of the tag and disarm.
If the key with the label was lost, then you can disable the security mode using your smartphone. It is necessary to make a call to the number set in the GSM module. When the security system answers, the car owner must enter the “998*” command.

Alarm control from your phone

The complex can be controlled using a telephone, for this you need to call the GSM module number and enter one of the commands:

to return to previous state system press #;
so that the complex repeats the last spoken message, press *;
the combination "1 *" will allow the activation of the security mode;
to disable the protection mode, enter the combination "0 *";
to silently activate the armed mode, enter "10*";
to disable silent protection, enter the combination "00*";
help call - command "9 *";
to listen to the history of events that occurred during the absence of the car owner, enter the combination "09 *";
activation of the microphone for listening to the cabin is carried out by pressing the keys "007 *";
to request the balance of the SIM card installed in the GSM module, enter "100*";
to perform a remote start of the motor, as well as to extend its operation, enter "123 *";
to stop the operation of the power unit remotely, enter "321 *";
to request the current coordinates of the location of the machine, enter "500*";
activation of the pre-heating device for the power unit for diesel engines - "156 *";
to disable this function, enter the command "651 *";
command "789*" allows you to enable automatic start of the machine's motor;
"987 *" - prohibition of the possibility of remote engine start;
combination "666 *" provides blocking of the power unit;
to disable the blocking of the motor of the machine, the command "999 *" is entered;
complete information about anti-theft complex- "258*";
to activate the immobilizer, as well as the Anti-hijack function, you must enter the command "888 *";
to disable the immo and the Anti-hijack option, enter the combination "998*".

The Alarm channel spoke about the capabilities of an Android-based mobile application for managing the Pandora 3910 complex.

When activating or deactivating one or another Pandora 3910 alarm function, the system must confirm the action with a voice message.

Faults and solutions

What problems can a car owner face:

The alarm mode "signaling" works for no reason. The system indicates that the Sensitivity, Tilt, or Motion controller has been activated. Most likely, the reason is incorrect adjustment or installation of sensors. Try lowering the sensitivity of your devices.
The security complex does not send messages to the number of the car owner upon request. There may be several reasons. The message center number may not have been programmed correctly. If the installation procedure was carried out by specialists, then contact them to solve the problem. The reason may be that the mobile operator has blocked the sending of messages. Then you need to contact the representative of the company providing communication services.
It is not possible to make a call to the complex from the additional number of the car owner. If you call the system number from another phone, you must enter a guest password to identify the user. Initially, the “signaling” is assigned code 1234. If the system was installed by specialists, the password can be changed.
The security complex cannot determine the number of the car owner. Depending on the mobile operator, the company may use different prefixes at the beginning of the number. When setting up the car owner's phone, only those prefixes that are selected by the mobile provider should be used.
The alarm mode has been activated, but the system cannot reach the additional number of the car owner. The reason should be sought in the operator. The voicemail option may have been activated for this number. It must be turned off.

Car alarm Pandora DXL 3000 - new model security complex of the DXL series, brought by the company's engineers to a high level of quality and reliability. Intuitive controls provide ease of use. The Pandora DXL 3000 alarm system is installed by specialists of service centers involved in the sale and installation of car security systems. Pandora is distinguished by a high level of reliability and resistance to hacking using code grabbers, scanners and similar devices.

Keychain Pandora DXl 3000

An advanced keychain with a liquid crystal screen attracts attention. The system embodied in the Pandora DXL 3000 is considered one of the most advanced to date. The developers brought some innovations to the structure of the key fob, returning the end position of the buttons, which improved the ergonomics of pressing and ensured the tightness of the case. The function of sound confirmation of pressing notifies the user of each key press of the Pandora DXL 3000 key fob.

The LCD screen of the key fob, being its most fragile part, is protected by a silicone damper. This protection technology was first used by developers when creating a car alarm radio transmitter.

The damper protects the screen of the Pandora DXL 3000 alarm key fob from impacts and extreme loads, while providing more accurate indicator positioning. The sealed case does not allow moisture, dust and dirt to penetrate inside, damaging the built-in chip. The Pandora DXL 3000 alarm comes with a small leather case for the key fob, which will be a pleasant surprise for many car owners.

Key fob functions

The developers in the new version of the car alarm have saved LED indicators, displaying the state of protection, which is not bad and smart decision. The user can evaluate the performance of a two-way communication channel: a green indicator indicates the activation of the armed mode, a red indicator informs about the occurrence of an emergency situation or the need to transfer the car to the armed mode.

Basic car alarm functions

Interception of a radio signal, dialogue code, electronic protection against breaking.
Signal reception over long distances.
Automatic control of the communication channel.
An additional immobilizer that increases the protective functions of the Pandora DXL 3000 car alarm.
11 protected zones.
Double pin.
Tilt and movement sensors.

Equipment

The Pandora DXL 3000 alarm is supplied with the following configuration:

Central signaling unit.
Two key fobs - main and additional. The main key fob is equipped with a liquid crystal display.
Shock, acceleration, tilt sensors.
Protective cover for key fob.
Receive/transmit module.
Valet button.
Light indicators.
Limit switches.
Wiring harnesses.
User manual Pandora DXL 3000.

Car alarm features

The Pandora DXL 3000 security complex is equipped with an improved version of a multi-channel high-speed radio path. The changes affected the transition during signal reception and transmission to free channels, service and working channels were optimized, adjustments were made to the circuitry of the cabin RF module. Such measures made it possible to increase the operating range of the warning channel and the command channel, and increased the stability of the system in the presence of interference.

The developers have optimized the LCD key fob, lowering the level of energy consumption and increasing the life of the batteries. The only drawback of the changes made was the incompatibility of key fobs and RF modules different models alarms.

Encoding algorithms

The Pandora DXl 3000 alarm system is distinguished by the cryptographic strength of the dialog authorization algorithms. Electronic hacking of car alarms is impossible due to the use of complex algorithm encryption and unique encryption keys. To date, Pandora car alarms are the only security systems, which use dialog coding and two-way communication not only in the main, but also in additional key fobs.

base unit

In the Pandora DXL 3000 car alarm, the base unit has been redesigned, which is now equipped with wide opportunities for programming timer channels. The main innovation is the entry of a PIN code to access certain functions and system options.

According to the instructions, Pandora DXL 3000 uses two instead of one PIN: Service-code and Master-code. Using the service code, you can transfer the system to the maintenance mode or enter the programming and settings mode of the security complex. Given code factory, so if desired, the user can change it. The Master-code system allows you to emergency disarm the car. The meaning of this code is indicated on plastic card supplied with the car alarm.

System Setup

The car alarm comes with a table of commands and statuses that allow you to configure the security system. This table lists the vehicle code supported on the CAN bus and information that includes all the features of the integrated interface.

Car alarm programming begins with the selection of the make and model of the vehicle and the specific settings of the digital CAN bus. In the "Settings" table, the necessary parameters are selected, after which they are saved and recorded for further operation.

If the required code cannot be found in the table, it is entered manually. After the vehicle code is selected, the system parameters are configured.

The maximum functionality of the car alarm is realized when the following items are resolved:

arming mode.
Disarming mode.
System management.
Re-staging.

The car owner can additionally configure other system parameters. All settings are saved in a separate file, which is located in the root folder of the security complex and is available for moving or copying.

Car alarm installation

Installation of the security complex can be carried out as in service centers, and independently by the car owner. There are several ways to install a Pandora car alarm - under the dashboard, in the engine compartment, or in the passenger compartment or body of the car.

When installing an alarm in the engine compartment, the blocking relay is located near the ignition switch, and a shock sensor is attached to the steering column. For this, plastic clamps can be used to secure the main parts.

When installing a car alarm under the dashboard, the system control unit is mounted in the engine compartment. A blocking relay is attached between the branches of the duct.

The third option for mounting a car alarm involves installing it anywhere in the cabin or car body with the optimal location of all components. base unit is placed either in the passenger compartment or in the back of the car, but the siren is installed under the battery pad. The hood trailer is attached next to the hood indicator with right side, and the trunk limit switch is installed next to the lock. The system is wired after the alarm is installed.

Installing the shock sensor

Shock sensors are installed last. The switch of the security complex - the Valet button - is located in such a way that it is not visible, but at the same time access to it is free. At the same time, there should not have been any electronics near her that could drown out the signal reception.

Connecting a car alarm to a personal computer

The security complex is connected to a personal computer via mini-USB. The base unit of the system is connected to the PC using the Valet button, while successful synchronization is confirmed by a light indicator.

After connecting the alarm to the computer, the LED starts to glow red-green color. For normal synchronization of the complex with a PC, you need to run the software - Pandora DXL Loader. After starting the program, you need to enter the service pin code indicated on the card that comes with the alarm.

The code is entered by pressing the Valet key required amount times corresponding to each digit of the pin code. The pause between button presses should not exceed one second. If this time is exceeded, such a pause is regarded as a transition to the next digit.

The indicator of the system block notifies the end of the input of each digit and its reception with a red flash. The programming of the Pandora complex begins after all the code has been entered, which is accompanied by a red and green flash of the indicator.

Categories

Popular