What is the name of the mesh on the crane. Faucet aerator is a nice addition. Aesthetics is in the details

Before touching one of these useful gadgets, it is important to understand why they are needed, and what are their differences. With the arrival of warmth garden plots are populated by mosses, the seeds of which are brought from the forest by the winds. They, along with lichens, densely cover the soil, preventing air and moisture from penetrating inside, which is very bad for other plants.

Why do you need an aerator?

When a garden is left unattended, many elements accumulate on the surface of the earth. These include:

• fallen and crumbling leaves;
• mowed unharvested grass;
• particles of household waste;
• not rotted part of manure and fertilizers.

This forms an impenetrable layer, preventing the germination of seedlings, as well as their nutrition with moisture and beneficial substances. Usually, everything superfluous is removed with a rake, with which the soil is cleared and slightly loosened. However, this is very long and inefficient, so they were replaced by a more technologically advanced device called an aerator.

It is versatile and ideal for processing future beds. It not only slightly loosens the soil, but makes deep and uniform holes in it. By removing the moss-covered surface, the old damp grass and at the same time pulling out the weeds, he clears the ground.

Due to this, it becomes loose and soft. Whether it is a future garden bed, a flower bed or a lawn near the house, it is ideal for planting seeds or seedlings. Plants will receive fertilizer, moisture and the necessary oxygen, which means they will develop better.

If the flowers are regularly watered, but at the same time they wither, or when “bald” places appear in the center of the flower bed with rare plants, this may mean that the flowers lack air or moisture, and therefore need to be aerated. In addition, a dense, not loosened surface interferes with the proper development of the root system, which goes down in search of moisture and softer rock.

Two systems of aerators according to the principle of operation. When is a scarifier used?

There are two types of aerators that do not differ in appearance and can be either gasoline, or mechanical or electric. Their difference lies in the location and type of teeth and knives with which the soil is cultivated.

According to the processing principle, aerators can have two systems:

1. The teeth are made of empty metal, and they are called knitting needles. They capture soil particles Chinese chopsticks, and take them out. Later, the earth spills out, so the displacement of the fertile black soil will not occur, and the cracks in the soil will remain. good example Bosch AVR 1100 will be in this category
2. The teeth are made in the form of a knife blade, they are flat and sweep the ground. The mechanism with blades attached to it is a cutting drum and is attached to a shock-absorbing spring. Thanks to this, the aerated earth becomes fluffy and light, and therefore pliable to saturation and fertilizer. The system also cuts the surface, removing old grass with small shoots and leaves, and also removes weeds. This tool is called a scarifier. Perfect Choice for work - MTD OPTIMA 35 VO

If the bed has not been processed for a long time, or the lawn is very neglected, it is better to choose a scarifier. In the case when you constantly monitor the site and loosen it periodically (at least 3 times a year), an ordinary aerator is quite suitable.

Some companies produce scarifiers with interchangeable systems for processing. In this case, the kit will include knitting needles and knives, and the device is suitable for working with any type of soil. When choosing an aerator, it is important to pay attention to the quality and shape of the teeth, as well as the material from which they are made. It is recommended to choose with steel teeth, as they are stronger, less susceptible to rust, and they are less likely to be undermined. great example there will be an aerator-scarifier with replaceable nozzles Gruntek VE2-33.

What to give preference when choosing an aerator: mechanics or automation?

In terms of engine type, aerators are as versatile as lawn mowers. They are divided into three types:

• manual or mechanical;
• Electrical;
• Petrol.

The choice of engine type is up to you. Each of them has its own advantages and disadvantages.

Mechanical aerators

As a rule, models like the Hecht G02FHN are used for small areas or very remote ones. It is also a favorite species of conservationists, as there is no exhaust emission, but Environment does not get dirty.

The advantages of mechanical aerators are:

• silent application;
• lack of fuel and binding to wires;
• low cost;
• compactness.

However, there are also disadvantages. Although there are both hand-held devices and those worn on the feet, aeration with such an instrument will take a lot of time and will be physically difficult.

Petrol aerators

If you decide to choose an automatic aerator, you should decide which type of engine you prefer.

Gasoline aerators have always been considered the most durable and high quality. Their advantages include mobility and high power engine. They do not overheat and are able to process a vast area at a time.

Preferring gasoline-powered vehicles, you should pay special attention to the engine and choose a high-quality, “not Chinese” device with a four-stroke system, such as AL-KO Combi Care 38 P Comfort. They are much more reliable and quieter. In addition, these engines are very economical, since the tank is enough for a large area.

It is worth noting that the disadvantage of a gasoline aerator is its weight. In addition, the volume of fuel is added. And for a fragile girl, the aerator becomes unbearably heavy, so it is recommended to choose self-propelled vehicles. A good example for professional processing large plots will be Husqvarna S 500 PRO.

Electric aerators

Apparatuses with electric motors are very convenient and economical. They are much lighter and smaller than petrol ones. Models such as the Bosch AVR 1100 Verticutter can operate almost silently, and also have built-in protection against power failures and surges.

Electric aerators are much more convenient if you have to handle not large plot near the house. But remember that you will always be tied to an extension cord. It is important that if you are going to process large territories and use the technique for more than two hours continuously, look at the engine power before buying. An excellent specimen in this category are the AL-KO Comfort 38 E Combi Care or Makita UV3600 aerators.

Important things to consider when choosing an aerator

There are a lot of different types and types of these devices. Therefore, preference is mainly given to functionality and all kinds of amenities. Of course, the more of them, the more expensive the aerator, because each of us pays extra for the service every day.

The processing depth of the aerator, how many modes to choose?

To begin with, it is necessary that the device perform its main role, that is, aerate the earth. Modern models, for example, STIGA SVP40B, have from three to five processing modes. At least the teeth should enter it by 10 centimeters, otherwise the drainage will be of poor quality.

It is most convenient when the mechanism combines many different functions, and you can switch between them quickly. In this case, one device like the AL-KO Highline 51.5 SP-A can do the following:

1. Turn on the first mode and remove the growths of moss and the remains of leaves (for this you need 2-3cm teeth);
2. If the surface has not been treated for a very long time, it cannot be aerated immediately with long teeth, so another mode of 3-6 cm is needed;
3. After that, choosing maximum length punctures, you can prepare the ground completely.

From this it follows that it is worth choosing models with three or more modes. For correct operation they are all necessary.

Aerator surface treatment width

The characteristics of each model indicate the width of the processed surface at a time. This is a very important factor when working with large areas, because it depends on it how long it will take. The wider the serrated surface, the large area it captures in one go.

If you are going to work on huge fields and choose an aerator for this purpose, pay attention to this parameter. It can also be called the width of the grip and reach 460 mm, like the Texas Pro Cut 460 Tg.

The presence of a grass collector

If you are purchasing an aerator for country beds You may not want to use the grass catcher, using earthen clods, grass and leaves as fertilizer for future plantings.

However, if we are talking about a chic lawn near the house, in the garden or on the site near the cottage, you are unlikely to want to clean up after aeration yourself. Therefore, it is better to let the technology do it for you.

Grass catchers are hard and soft. Hard ones wash better, and soft ones are easier and more convenient to shake out. As for the volume, it all depends on the cultivated area.

Aerator wheel drive

This function contained in almost all modern automatic models. It is very convenient, since the aerator will do all the work. You will only need to guide him.

In addition, this aerator is ideal for women. When choosing a device, you can not take into account the parameters of its weight, since you do not have to carry it.

Outcome

Use the tips from our article when choosing an aerator or scarifier and get the most the best equipment to work in the garden. It will not only make your work much easier, but also make it more enjoyable. There will be more time to relax in the country, and it will only bring pleasure.

As the name implies, the aerator is necessary for aeration (air saturation) of the garden plot and lawn. In spring, during the period of active snowmelt, in autumn, after heavy rains, the soil is saturated with moisture and compacted, which negatively affects its fertility. A lawn aerator will correct this situation. It is worth noting that this device will also be indispensable for clayey areas, as well as areas with a shallow depth of groundwater.

The principle of operation of the aerator

Modern aerators use two different principles works:

• Piercing the soil with teeth.
• Piercing with the capture of soil and its displacement.

  This method is more perfect, because it allows not only to saturate the soil with oxygen, but also to reduce its density. Lawn aerators that work according to this principle have hollow teeth, thanks to which the soil is “captured”.

Modern aerators can be conventional (mechanical) and automated. The latter are more convenient to use and are optimally suited for servicing large lawns, do not require much time to care for your backyard.

Choosing an aerator

When choosing an automated aerator, you should pay attention to the following characteristics:

• Engine's type.

  Aerators with an electric motor are more environmentally friendly, but the radius of their work is limited. Gasoline-powered appliances do not have this disadvantage, besides, they consume relatively little fuel and have a low noise level.

• aeration depth.

  The depth of the puncture should be at least 10 centimeters (according to the recommendations of specialists). Otherwise, the soil may suffer from a lack of oxygen, which will affect its fertility and the beauty of your lawn.

• Depth adjustable.

  On the different areas different depths of aeration will be required. If the lawn aerator has teeth with adjustable length, such equipment can be considered truly universal.

• Manufacturing material.

  The aerator teeth must be made of a material that is not subject to corrosion. This affects the life of the device.

• Availability of additional options.

  Some manufacturers supply their products additional options facilitating lawn care. However, they significantly affect the cost of equipment, so they are considered optional.

Faucet aerator - an engineering device that allows you to reduce water consumption. In this article, we will consider everything about the aerator - what it is and whether water savings are really achieved during the operation of the device, consumer reviews about the water nozzle.

Water aerator - fixture design

The principle of operation of the aerator is to reduce the flow of liquid without reducing the intensity of the flowing jet. The nozzle is attached directly to the faucet, and its use allows you to halve the flow of liquid. Being processed in the aerator, the water becomes softer, enriched with oxygen and freed from chlorine impurities.

The water aerator consists of a nozzle body, a water filter system and a rubber gasket. The material for the manufacture of the body of the installation can be plastic, pressed metal or brass. Each option has its pros and cons:

• The plastic aerator body is lightweight, low cost, affordable for a wide group of consumers. Negative sides- fragility, susceptibility to mechanical damage.
• Extruded metal aerator housing - high mechanical strength, average price, negative qualities – high degree susceptibility to corrosion.
• Brass aerator body the best option, the fixture is distinguished by high technical specifications for strength and durability, the material is not subject to corrosion.

Manufacturers produce options for faucet nozzles with different ways fasteners distinguish between aerators with internal or external threads.

The choice of device depends on the preferences of the consumer, functionality device and financial capabilities of the client. Nozzles for aeration of water are usually divided into:

1. Vacuum aerator - operates by compressing water under high pressure using a special vacuum valve. Savings are achieved by aerating the liquid.
2. Adjustable aerator - This device can provide water supply with a jet stream or in the form of drip irrigation.
3. The color view of aeration devices is a more advanced version of the aerator. The color aerator allows you to determine the temperature of the water without additional tactile effort. At a temperature of the supplied jet up to 29C, the consumer sees a green backlight, from 30 to 38C - blue, above 38C - red. The rest of the functions are similar classical scheme aerator.

Advantages and disadvantages of a water aerator

The main purpose of the aeration nozzle is to normalize the flow of liquid. The advantages of equipping faucets with aerators are as follows:

• The jet of water coming out through the aerator becomes soft and milky. When washing dishes, there is no spray fan, the water gently envelops kitchen utensils, which allows you to easily and comfortably carry out high-quality washing.

• The flow of water is sufficient for flushing detergents without the formation of splashes and flying foam.
• Water quality is much improved after the weathering of chlorine impurities, which are displaced from the water when it is enriched with oxygen.
• Air bubbles appear in aerated water, which improve the quality of washing the surfaces of objects or the human body.
• Of great importance is the saving of water during aeration of the jet - the flow rate is reduced by almost 2 times.
• Aeration nozzle filters provide rough cleaning water from large impurities - sand, silt particles, salts.
• Water taps equipped with aerators have low level noise during operation.
• Equally important is the affordability of the nozzle for all consumer groups.
• Equipment installation is simple.

The disadvantage of the device is its fragility - replacement is required once a year, and if old water pipes- 1 time in 6 months.

Advice! You can extend the life of the water aerator if you constantly monitor its technical condition and carry out timely cleaning.

Cleaning and replacing the aerator - how to do it right

During the operation of the aerator, the system of stepped water filters becomes very dirty, as a result - a decrease in water pressure. Cleaning filters with your own hands is not difficult if you follow certain rules:

• To begin with, the aerator should be unscrewed from the tap by wrapping it with rags and turning it counterclockwise. Sometimes it may be necessary to use a wrench.

• Then you should carry out visual inspection aerator for contamination. It is required to thoroughly rinse the aerator under running water.
• The next step will be the subsequent disassembly of the aerator: removal rubber gasket, plastic insert and release of the cleaning filter from the insert.
• Carefully, alternately, four filter meshes are removed, which must be washed with brushes under running water.

Important! When cleaning the nets, it is important to ensure that stubborn dirt and plaque are washed off especially carefully.

• The washed meshes are inserted into the filter, the aerator is assembled in the reverse order.

Faucet aerator in the bathroom: video

Faucet aerator: photo

Kirill Sysoev

Calloused hands do not know boredom!

Lawn aeration is a procedure in which holes are formed in the area and the grass felt is partially removed. The process is aimed at enriching the soil with air, improving the access of fertilizers and water to the roots of plants. A regular supply of oxygen is important condition proper care shaping the appearance of the lawn. The process of aeration is very simple. For this, special equipment is used or a tool is assembled from improvised materials.

What is a lawn aerator

The name of the tool eloquently describes the purpose of the device - saturation of the soil with air. The main task is to nourish, loosen, pierce the compacted turf. As a result, oxygen, water will quickly penetrate to the roots of plants. According to the method of piercing, there are two types of aerators:

1. With a thin tube that goes vertically into the turf. This is best method soil loosening. The only downside is the cost.
2. With a thin pin, spike. More cheap way, but the disadvantage is that around the hole formed, the soil can be compacted.

For lawn care, devices such as an aerator and a scarifier (verticutter) are used. The differences between them are as follows:

1. The aerator on the principle of operation resembles a comb. The simplest example is a pitchfork. The tool is indispensable for collecting debris, thinning grass, removing weeds. The earth is loosened with the help of spokes or teeth. Combing the grass, small grooves are left on the soil, which help oxygen and water to penetrate into the ground.
2. The scarifier performs the same functions, but is considered a more powerful unit. Instead of teeth - cutters. The simplest example- loot.

When choosing what to use, you need to build on the properties of the soil: if it is soft, an aerator will do. If the soil is heavily compacted, it is better to use a verticutter or scarifier. Many models include the functions of all mechanisms, which allows you to work on any soil. The garden equipment market is represented by three types of aerators: mechanical, electric and gasoline.

Mechanical

The aerator for a lawn mechanical is issued in two types: foot and manual. Manual are represented by pitchforks, rakes, in the form of a cart with a roller. Foot - sandals and bars. Characteristics:

1. Rakes-aerators differ from the usual presence of thin or triangular teeth, shaped like knives. They are referred to as scarifiers.
2. A pitchfork is a tool that is available to every gardener. Their needles are long, so the depth of the puncture should be about 10-15 centimeters, the distance between the holes should be 5-10 cm.

The design of the last type of manual aerating devices resembles a small cart with wheels, between which a spiked shaft is fixed. When the wheels move, they turn a shaft, which pierces the ground with spokes. The size of the devices are different, but the wider they are, the larger the cultivated area. The height of the spokes or knives depends on the size of the entire unit. Such devices have the highest performance among mechanical aerators. To increase it, it is recommended to put a load-weighting agent on top of the mechanism. Suitable for processing areas up to 6 acres.

Sandals are metal or plastic pads with teeth, spikes, which are attached to the soles of any work shoes with straps. About 14 spikes are screwed along the entire surface of the plates, the length of which is 4-5 cm. The sandals are fixed to the foot. The difficulty lies in getting used to lifting the limbs straight up. Trampling on the lawn, the gardener pierces the soil with his teeth.

The tubular type of foot mechanical aerator deserves special attention. In appearance, it resembles a frame with 3-4 tubes welded on. Their diameter is 10-15 mm. Due to the high labor intensity, such devices are not very common. The land is processed like this:

1. Press down on the tubes with your foot.
2. Push them into the turf, get it.
3. Move the device 10-15 cm forward.
4. Press down with your foot again.
5. The turf from the tubes under the pressure of a new portion is ejected through the upper holes.
6. Repeat all over again.

Mechanical aerators are recommended for use on small areas, with an area of ​​​​approximately from 2 to 6 acres. They do not require electricity or fuel. The main advantages of the devices are low cost, a light weight and silent operation. The disadvantages include poor performance, difficulty in processing large areas. To qualitatively loosen the earth, significant expenditures of physical strength will be required.

Electric

The electric lawn aerator looks like a lawn mower. Combing and loosening the soil is possible in areas up to 15 acres. The main advantage: the ability to process a large area, garden, quieter operation compared to a gasoline aerator. In order not to have to constantly carry an extension cord with a socket, you can choose a battery model. It is considered mobile, but has a number of disadvantages - the cost and time limit until a new recharge.

A lawn aerator powered by electricity is in most cases a multifunctional model. The large weight of the device does not require additional weighting. The unit combines the properties of an aerator, a verticutter and a scarifier. It all depends on the type of built-in knife:

• the scarifier is able to comb the lawn, remove foliage, cut grass, weeds, and clear other debris;
• The verticutter removes moss, cuts the soil, grass stalks, roots, which has a beneficial effect on the condition of the grass cover.

Petrol

A feature of lawn aerators powered by gasoline is autonomy during operation. The cost of the machine is almost 4 times higher than the electric one, but their productivity is also greater. The power is stronger, you can immediately process more than 15 acres, the penetration depth is adjustable. Such models are intended for processing the territories of service enterprises, large household plots.

Types of lawn aerators

Gasoline and electric aerators are multifunctional devices. The most demanded models: GARDENA, Makita, BOSCH, AL-KO, Wortex, Viking. General characteristics such:

• powered by gasoline or electricity;
• electric power - 1000-1800 W, gasoline - 1.2-6 horsepower;
• working width - 40-58 cm;
• weight - 10-131 kg;
• capacity of the container, grass collector - 35-60 l.

GARDENA

The Gardena electric aerator can gently remove moss, dead grass or weeds. Device description:

• name: lawn scarifier GARDENA EVC 1000;
• price: 11 495 rubles;
• features: electric motor, blades made of of stainless steel, depth adjustment, large patterned wheels help to steer the machine easily, special transport position, detachable handle;
• pluses: safe movement, space saving, manufacturer's warranty, high performance;
• cons: no.

A rake is used to process small areas. Model Feature:

• name: rake-aerator Gardena-03391;
• price: 1,323 rubles;
• characteristics: designed to collect and comb out moss and old grass from the lawn, the working part is 35 centimeters;
• pluses: safe movement, saving space, cheap;
• cons: difficult to work on a large area.

Makita

Makita verticutters are easy to use and easy to store. Description:

• name: Makita UV3600 aerator;
• price: 12 990 rubles;
• characteristics: power - 1800 W, electric motor, mains supply, grass collector volume - 40 l, the kit includes a warranty card, user manual, a set of fasteners, a knife, a grass container;
• pros: powerful engine, there is a system for quick blade change, a comfortable handle, the container is simply and quickly installed;
• cons: no.

The Makita UV3200 is easy to use and perfect for small to medium sized lawns. Description:

• name: verticutter Makita UV3600;
• price: 12 990 rubles;
• characteristics: electric motor with a power of 1300 W, mains power, speed - 3500 per minute, grass collector volume - 30 l, weight - 12 kg;
• pluses: quick change of knives, fastened to an aluminum wear-resistant shaft, comfortable rubber handle, durable cable, safe switching on, the container is simply installed;
• cons: noisy lawn mower.

Bosch

Bosch products have long occupied a leading position in the market. Gardening equipment is no exception. For example:

• name: lawn verticutter Bosch AVR 1100 Verticutter;
• price: 15 502 rubles;
• characteristics: country of origin - Germany, electric, 1100 W, mains powered, grass collector volume - 50 l, width - 32 cm, 4 height adjustment levels, any color;
• pluses: high performance, capacious container, no vibration, increased noise;
• cons: short wire length.

The Bosch rake scarifier is also no less in demand when working on personal plot. Model Description:

• name: Bosch scarifier ALR 900 (0.600.88A.000);
• price: 8 750 rubles;
• characteristics: country of origin - Germany, power - 900 W, there is a grass collector, weight - 9.4 kg;
• pluses: copes well with cleaning and aerating the lawn;
• cons: overpriced.

AL-KO

The AL-KO oxygenation and tillage device is on the market with more than 30 models. For example:

• name: verticutter AL-KO Combi Care 38 P Comfort;
• price: 21 990 rubles;
• characteristics: designed for loosening, aerating, weight - 15 kg, works autonomously from the mains, it is possible to replace the shaft independently, manually, in the kit - a grass collector;
• pluses: mobile, easy to operate, maintain, not very heavy;
• cons: expensive.

Slightly different characteristics of a similar class "E" model. It also belongs to the type of verticutters. Description:

• name: verticutter AL-KO Combi Care 38 E Comfort;
• price: 7 490 rubles;
• characteristics: eclectic engine, weight - 15 kg, loosens, aerates, collects grass, operates autonomously from the mains, complete with grass catcher, ripper shaft, aerator shaft, suitable for areas up to 800 m2;
• pluses: mobile, easy to use;
• minuses: dumpster not convenient, it is difficult to manage the device, especially to deploy.

Wortex

A scarifier aerator is a great helper when caring for lawns. He fills up beautifully. upper layer land with air, cleans the territory. Description:

• name: scarifier WORTEX AE 3212 S;
• price: 7 661 rubles;
• characteristics: power - 1200 W, rpm - 3600, height adjustment in 5 positions, stripe width - 32 cm, container volume - 40 l, weight - 8.5 kg;
• pluses: copes well with its task;
• cons: the container fills up very quickly.

Viking

Gasoline aerators are able to process a large area. Their productivity is very high. For example:

• name: gasoline aerator VIKING LB 540 62900113101;
• price: 40 790 rubles;
• characteristics: Gas engine equipped with an easy start function, working width - 38 cm, depth - 25 mm, 6 levels of its adjustment, weight - 33 kg, power - 2200 W;
• pros: good unit, there is no emission of exhaust gases;
• cons: cost.

• name: electric verticutter VIKING LE 540 62900115600;
• price: 28 390 rubles;
• characteristics: power - 1600 W, working width - 38 cm, depth - 25 mm, 6 levels of its adjustment, weight - 27 kg;
• pluses: perfectly combs the lawn, loosens the ground well;
• cons: very heavy, no container for collecting garbage.

You can buy an aerator in the online store, at specialized points of sale. If there are promotions, ongoing sales, the acquisition will be very profitable. Purchase discounts are provided to regular customers. In the regions of St. Petersburg, Moscow, the cost does not differ much, but is determined by the functionality and configuration of the device. You can arrange and order delivery by mail, courier or pickup.

How to choose a lawn aerator

Lawn aerator selection criteria are based on more than just type. It is important to consider the size of the area, power, working width, depth, weight. A big plus is the voluminous grass catcher. The selection features are:

1. The power of the device affects the duration of continuous operation, the exclusion of overheating. The higher the indicator, the longer the machine works.
2. Working width determines the speed of work. The larger it is, the faster the soil is processed.
3. The plastic case is lightweight, does not rust, but may break on impact. Metal - weighs more, but is stronger.

Soil aeration is the punctures of the soil in order to facilitate the access of air, water and nutrients to the roots of plants.

Aeration of the soil is an artificial stimulator for the growth of roots, forced to fill the resulting voids. Garden Mulching

A lawn aerator is a special unit that simplifies and speeds up the process of lawn aeration. How to choose the right aerator for the lawn, we will understand in the article.

The principle of operation of the aerator

According to the principle of operation, aerators are divided into two types, which practically do not differ externally, but perform different functions. Verticutter (from English - vertical cutter) - an aerator that looks like an automated pitchfork. It is presented in the form of a drum with spokes, rods, in the process of movement, the spokes pierce the ground and pull out pieces of turf, dead roots, weeds and other debris to the surface. The verticutter leaves behind a series of visible holes in the soil. Otherwise, the scarifier works - an aerator, which, according to the principle of operation, resembles the work of a rake. Instead of spokes, blades on a supple spring are attached to the drum of this unit. After treatment with a scarifier, the soil becomes fluffy and light, ready to receive nutrients. There are units that combine both types of aerator. In such machines, a drum with spokes replaces a drum with blades.

Types of aerators

According to the type of engine used, there are 3 types of aerators.

• mechanical aerators. This type of aerator is also called manual. Manual aerators are suitable for small areas or remote locations. They are a drum with a handle, some models are equipped with wheels for ease of movement. Classic pitchforks and sandals for lawn aeration belong to the same species. When using a fork, remember that the depth of the puncture should not be more than half the point. Sandals are a platform worn over boots with spikes of the required height attached. Following the site, you involuntarily make punctures in the soil. The advantages of mechanical aerators are noiselessness and the absence of exhaust gases, there is no connection to fuel, and the cost is pleasant. However, this unit can only process large territories.

• Petrol aerators. A powerful unit capable of processing large areas at a time without overheating and topping up fuel. The choice of a gasoline aerator is right choice engine. A high-quality engine will last for many years without complaints and breakdowns. The disadvantage of a gasoline aerator is its considerable weight. To mitigate this disadvantage, pay attention to self-propelled machines.
• Electric aerators. The disadvantages of gasoline cars turn into advantages of electric aerators. Light weight, due to which increased mobility - even a girl can cope with the unit. The absence of noise during operation, protection against power surges, efficiency are the main advantages of electric aerators. Lack of electrical type only one - attachment to an electrical outlet. It is impossible to work further from home than the machine's wire allows.

Choosing an aerator

Before buying an aerator, pay attention to the parameters of the machine, which play a paramount role in choosing.

• Depth of processing aerator. The operating modes of the aerator differ in the depth of the needle puncture. Choose a model with 3-5 modes. The first mode (processing up to 3 cm) will help get rid of. During a long break in the cultivation of the earth, switch modes gradually, starting with the shallowest, and gradually increasing the depth.
• Aerator processing width. Important parameter, which is affected by the size of the treated area. For a large area, choose an aerator with a wide drum, this will reduce the time spent on processing. But remember that it is impossible to process narrow and hard-to-reach places with such a drum.
• The presence of a container for collecting removed grass. The grass catcher is handy when working on the lawn adjoining territory where important appearance area after processing.
• Existence of a drive on wheels of the aerator. An indispensable feature for the gasoline version, and if the car has to be used by women.

Choosing an aerator is a worthwhile investment in your garden and lawn care routine. Long and physically hard work pitchforks will be left behind, they will be replaced by convenience and speed of processing without loss of quality.