Cleaning and washing of plastic products: dishes, teapots, barrels, etc. Easy Ways to Descale Your Kettle Descale Your Kettle

Scale on the walls of the kettle is formed in any case, even if a system is installed in the apartment that will improve the quality of the water, but it is impossible to completely clean the liquid from the salts in the composition in this way. Sooner or later, limescale will settle on the walls, which, in addition to looking unsightly, can harm the health of loved ones. This means that it's time to think about how to descale the kettle. Today, in our review, we will analyze in detail the methods for self-cleaning the kettle from scale, and we will also study exactly how each tool works.

Plaque forms on the bottom and inner walls of the device, and in electric models - on the heating element. Unfortunately, it is impossible to avoid this phenomenon, plaque will settle to a greater or lesser extent, even if used. The formation of plaque occurs due to the content of salts in tap water, and the more there are, the more often the plaque will appear on the walls. This problem cannot be ignored for several reasons:

• for an electrical device, this increases and leads to an early breakdown;
• in ordinary teapots plaque can destroy the walls;
• salts are harmful to the body, getting into or coffee, they thus penetrate inside and adversely affect the functioning of the kidneys and urinary system.

How to clean the kettle from scale at home using folk methods

We all remember the old adage that it is easier to prevent a problem than to fix its consequences. So it is with plaque - with regular cleaning, it is much faster and easier to remove it, and you do not need to use it for this. We have selected the best homemade recipes on how to get rid of scale in an electric and conventional kettle.

How to clean the kettle from scale with citric acid

Most effective remedy- lemon acid. It can be used for both regular and electrical models. Before descaling the kettle citric acid, you need to understand the principle of the lemon. Lime scale is an alkali that reacts with an acid. The procedure is as follows:

1. Pour a bag of lemons inside and pour plain water above the level of plaque formation.
2. Bring to a boil and leave on low heat for a few minutes.
3. The reaction is almost instantaneous, the plaque falls off in pieces from the inner walls.

For prevention purposes, such a procedure as cleaning the kettle with citric acid should be performed monthly. A folk remedy can quickly descale and other household appliances, for example, .

How to get rid of scale in the kettle with vinegar

Vinegar can be found in several recipes for cleaning walls from plaque. For electrical appliances it is undesirable to use it, however, if the case is running, and there is no other way out, acid can also be used. Before descaling the kettle with vinegar, you need to choose one of the following recipes.

In all recipes, the time is approximate, the hostess should observe the intensity of plaque peeling. After treating the inner walls with vinegar, wash everything thoroughly and boil fresh water 1-2 times to remove the smell. You can use vinegar.

How to descale a kettle with baking soda

Baking soda powder can be used on metal, enamel and electric models. The main advantage of using soda is that it removes old formations, but you need to be careful during processing, as it can leave scratches on the surface. Pour 2 tsp into the device with a volume of 3 l. with a slide of soda powder, pour water and boil for half an hour. After allowing the solution to cool and wash the walls in the usual way. If necessary, repeat the procedure several times.

How to clean the kettle from scale with carbonated drinks

Not everyone has a positive attitude towards soda, calling such drinks chemical. But since they are approved for use all over the world, they can certainly be used to clean the device at home. For example, Sprite effectively removes plaque, Fanta and Cola have a similar cleaning property, but they can stain the walls, so our editors excluded them. The procedure is as follows:

1. Pour Sprite inside, the amount of drink should not exceed half the volume of the kettle.
2. Bring to a boil, then rinse everything thoroughly.

It is important! It is strictly forbidden to clean electrical appliances with carbonated drinks. This method helps only for conventional devices.

How to descale a kettle with brine or oxalic acid

Cleaning with brine or oxalic acid is suitable for all types of household appliances. The main advantage of this method is the availability and cost savings. However, this method is not suitable for old and hardened plaque, in addition, cleaning with brine or oxalic acid will leave a smell inside for some time. You need to be ready for this. To remove plaque with the help of cleanings, you will need:

• 0.5 liters of brine;
• boil the brine for 10-15 minutes;
• after the solution is drained, and the walls are thoroughly washed. Baking soda can be used to remove the odor.

It is interesting! The composition of the marinade, as a rule, includes vinegar, so the result of cleaning with it has such an effect.

To clean plaque with oxalic acid, you should:

• pour a small amount of the composition inside, pour water;
• bring to a boil and leave for a few minutes. After that, rinse well.

How to clean scale in a kettle with apple or potato peels

In home advice, there is another extraordinary recipe - removing plaque with apple or potato peelings. It is used for metal or enamelled surfaces also suitable for electrical appliances. Of the main advantages, one can note the availability and cost-effectiveness, in addition, it is also one of the most environmentally friendly methods. Unfortunately, cleaning is a poor helper for stubborn plaque.

The principle of operation is explained simply. Apple peels contain fruit acids of organic origin, which react with the alkaline environment of limescale. Potato peels have an alkaline base, its action is similar to baking soda. The procedure is as follows:

1. Cleaning place inside, pour water and boil for 10-15 minutes.
2. Drain the water, rinse the walls in the usual way.

Combined kettle cleaning with vinegar, baking soda and citric acid

The combined method for cleaning the walls is heavy artillery for dealing with scale. However, this method, due to its aggressiveness, is not suitable for electrical appliances.

The algorithm of actions is as follows:

1. Stir in 1 liter of water 1-2 tsp. soda, boil.
2. Before you remove the scale in the kettle with citric acid, you need to pour out the previous composition, do all the steps again, but add 1 tbsp. l. lemons.
3. Perform all actions again, but include an additional 100 g of table vinegar in the composition.

Such an algorithm should lead to positive result, the plaque remaining on the walls becomes loose in its structure and is easily removed with a sponge.

Article

Arina Piskareva

Laboratory employee of the Department of Bioengineering, Moscow State University

Scale is mainly composed of calcium and magnesium carbonate. When interacting with citric, acetic, orthophosphoric or other acids, sparingly soluble carbonates alkaline earth metals converted into soluble salts. For example, acetates. Therefore, acidic substances are effective in the fight against scale, and to enhance the reaction they need to be heated.

Soda, when interacting with water, gives molecules of carbonic acid, which, in turn, reacts with insoluble calcium and magnesium carbonates, turning them into soluble hydrocarbons. And they are easily washed off with water and removed with a sponge.

1. How to clean scale with citric acid

• Suitable for any kettles, coffee machines, irons, washing machines.
• Proportions: kettles, coffee machines and irons - 10 g for every 100 ml of water; washing machines - 50 g for each kilogram of load.
• pros: environmental friendliness, safety, availability, pleasant aroma.
• Minuses: does not cope with old, thick scale.

Fill the kettle with water about ¾ - so that the liquid covers the plaque on the walls and heating elements, but does not splash out when boiling.

Pour citric acid (100 g of powder for every liter of water) into the kettle and boil.

Leave until completely cool. Drain the water, remove the remaining plaque with a sponge and wash thoroughly.

How to descale your coffee machine

For the coffee machine, it is necessary to prepare a solution of citric acid based on the volume of the water tank. For example, if the coffee machine is designed for 2 liters, you will need 200 g of citric acid.

Pour the hot solution into the tank and leave for 60 minutes.

After one hour, start the coffee preparation program without coffee itself. Drain liquid through dispensers.

Then start the coffee machine with water only, without citric acid. As soon as you drain the boiling water, you can use the device. If the tank of the coffee machine is removable, remove the remaining deposits under running water.

After the procedure, rinse the iron tank with running water, and wipe the sole ammonia or nail polish remover.

To remove plaque from the heating elements and the drum, you will need 50 g of acid for every kilogram of load.

Pour ¹⁄₄ (60 g) of citric acid (190 g acid per 5 kg load) into the powder tray directly into the drum. Start washing at maximum temperature.

2. How to clean scale with table vinegar

• Suitable for glass and ceramic teapots, teapots from of stainless steel, irons and washing machines.
• Proportions: teapots - 100 ml for each liter of water; irons - 1 tablespoon per liter of water; washing machines - 10 ml per kilogram of load.
• A plus: more aggressive acidic environment removes even thick layer scale.
• Minuses: can damage rubber and plastic elements appliances, pungent smell.

How to clean the kettle from scale

To clean the kettle, dilute vinegar in water and put on fire. After boiling, let it simmer for a few more minutes. Then drain the water, remove the remaining plaque with a sponge and detergent and boil in a kettle clean water.

Pour warm solution vinegar into the water tank and, holding the iron horizontally, release the steam.

Only boil a kettle of vinegar and release steam from an iron in a well-ventilated area.

How to descale a washing machine

In the washing machine, pour vinegar (10 ml per kilogram of load) into the flask for the conditioner or liquid powder. Run a wash without laundry at the highest temperature, and then another rinse to make sure you get rid of the specific odor.

Vinegar can damage the rubber bands on the door, so be careful if you decide to pour the substance directly into the drum. This can be done when there are no tanks for liquids in the machine.

3. How to clean scale with soda

• Suitable for any kettles, coffee machines.
• Proportions: kettles and coffee machines - 1 tablespoon for every 500 ml of water.
• pros: accessibility, simplicity.
• Minuses: does not take all types of plaque, does not cope with old deposits.

The mechanism for cleaning kettles and coffee makers with soda is simple: fill them with water, add soda and boil. At the same time, it is recommended not to remove the usual kettle from the fire for another 20–30 minutes after boiling, and the electric kettle to be turned on several times.

After the procedure, wash the inside of the kettle or coffee machine tank and boil clean water.

If the plaque is very strong, try a more alkaline soda ash instead of baking soda. Or add the same amount of salt to ordinary soda.

4. How to clean scale with soda

• Suitable for any kettles, coffee machines, irons.
• Proportions: Vessels are about ¾ full.
• A plus: effective even with thick deposits.
• Minus: A colored drink may stain the vessel. Therefore, for cleaning irons and white plastic electric kettles, it is better to take clear soda, including mineral water.

How to descale a kettle or coffee machine

Open the bottle and wait until most carbon dioxide disappear.

Pour soda into a teapot or coffee maker tank, hold for 15-20 minutes, and then boil.

Thanks to phosphoric acid and carbon dioxide, sodas do an excellent job with salt deposits.

Pour soda into the water tank, turn on the appliance, hold the iron upright and release steam. If there is a lot of scale, do this several times.

5. How to clean scale with brine

• Suitable for any kettles.
• Proportions: the kettle must be filled to ¾.
• pros: simplicity, accessibility.
• Minuses: does not cope with persistent plaque, specific smell.

The brine contains lactic and acetic acids. Fill the kettle with strained cucumber or tomato pickle, boil for 20-30 minutes.

After that, drain the brine with scale and wash the kettle with a soft sponge and detergent.

6. How to clean scale with soda, citric acid and vinegar

• Suitable for any kettles.
• Proportions: 1 tablespoon of baking soda, 1 tablespoon of citric acid and a glass of vinegar per liter of water.
• A plus: breaks even stone salt deposits.
• Minus: troublesome, strong smell, impact on devices of aggressive components.

Fill the kettle with water, add citric acid and boil. If the kettle is electric, do this 2-3 times. If normal, let the soda-lemon solution simmer for 20-30 minutes.

Drain and refill the kettle with water. Boil it and pour in the vinegar. Leave on for 15-20 minutes.

If after that the scale does not come off by itself, it will become loose. You can easily remove it with a sponge and dishwashing detergent.

At the end, boil clean water in the kettle again, and then drain it.

What to do to prevent scale

1. Try to pour only filtered water into kettles, coffee machines and irons.
2. Rinse the device before filling with water.
3. Do not leave water in the appliance after use. It is better to pour a new one every time.
4. Get rid of scale at least once a month, even if there is no pronounced plaque on the heating elements and walls. If the device has a self-cleaning function, use it.

In any water heater, from time to time we find a treasure of minerals, namely deposits of magnesium and potassium salts from hard water. And if we always try to prevent its occurrence in the dishwasher and washing machine, what can we say about scale in the kettle, which not only impairs its performance and leads to breakdowns, but also harms the health of the household.

We have collected 5 of the most effective and affordable ways to descale a kettle at home. Really everyone's secret folk remedies very simple:

• Scale in a kettle or electric kettle is afraid of organic and inorganic acids, therefore, almost all methods of descaling at home are based on the use of acid-containing solutions.

Method 1. How to descale an electric kettle with vinegar

Manufacturers of electric kettles do not recommend using vinegar to remove mineral deposits He's still way too aggressive. But sometimes without it strong remedy can't get by.

The method is suitable for: plastic, glass and metal teapots with very large quantity old scum.

Ingredients: water - about 500 ml and vinegar 9% - a little less than 1 cup or vinegar essence 70% - 1-2 tbsp. spoons.

Recipe: pour water into a kettle and boil it, then pour it into boiling water acetic acid and leave the scale to soak in the solution for 1 hour. If the scale has not gone away on its own, but only loosened, then it will need to be removed with a sponge. Remember to boil water in a clean kettle once or twice, and then rinse it well to wash off any remaining vinegar.

Method 2. How to descale an electric kettle with citric acid

The method is suitable for: cleaning electric kettles made of plastic, stainless steel and glass with light or moderate dirt.

Ingredients: water - about 500 ml and citric acid - 1-2 tbsp. spoons (depending on the degree of contamination). A quarter of a lemon can replace powdered acid.

Recipe: also pour water into the kettle and boil, then pour citric acid into boiling water or put a quarter of the lemon and wait until the water cools for about 1-2 hours (be careful - the acid that got into hot water, "hiss"). If the scale is not old, then it will come off on its own, otherwise you will need to make a little effort. Do not forget to boil water in a clean kettle, and then rinse it well.

Method 3. How to get rid of scale in a kettle of any kind using soda

enameled and aluminum cookware afraid of aggressive acids, so the first 2 ways to remove limescale are not suitable for them, but an ordinary one can help you soda solution.

The method is suitable for: descaling both in ordinary enameled and aluminum kettles, and in any electric kettles.

Ingredients: baking soda, and preferably soda ash - 1 tbsp. spoon, water - about 500 ml (the main thing is that it covers the entire limescale).

Recipe 1: to remove scale from the walls of enameled or aluminum teapot, you must first mix soda with water, then bring this solution to a boil, and then leave it to cook on low heat for half an hour. At the end of the procedure, we wash off the remnants of soda, for which we boil clean water 1 time, drain it and rinse the kettle.

Recipe 2: to wash Electric kettle soda, you need to boil water, make a soda solution, and then let it cool for 1-2 hours. A more gentle way is to pour soda into boiling water, and then leave the solution to cool completely - during this time, the mineral deposits will become softer, and it will be easier to wash them by hand.

Method 4. How to descale the kettle with Coca-Cola and Sprite

This method is not the most efficient and economical, but why not try for fun?

The method is suitable for: descaling in ordinary stainless steel kettles and for electric kettles, but for enameled and tin ones - with caution.

Ingredients: any carbonated drinks with citric acid in the composition are suitable - from Coca-Cola to Fanta. But it is better to take colorless drinks, for example, Sprite or Schweppes.

Recipe: First, we release gases from the drink, then pour 500 ml of liquid into the kettle and let it boil and then cool. The result of the experiment can be seen in this video.

Method 5. How to remove scale in a kettle using apple or potato peels

This product is suitable either for preventive care or if the limescale is still weak.

The method is suitable for: descaling ordinary enameled and metal kettles.

Ingredients: Apple, pear or potato peels.

Recipe: put apple, pear or washed potato peels in a kettle, pour water and bring to a boil. As soon as the water boils, leave the peel to cool for 1-2 hours, and then wash the softened plaque with a sponge.

Using water from a kettle for drinking, the walls of which are covered with a layer of scale, is unhealthy, as part of the mineral salts settle in internal organs. Therefore, cleaning an electric kettle is a vital necessity.

The deposits of salts and alkalis will soften the acidic environment. For a quick effect, boiling in the presence of organic acids is connected.

household

Advantage ready mixes in ease of use: follow the instructions, follow the breeding scheme. The disadvantages are in the chemical nature of the composition. Purchasable funds serve as a reason for the appearance of allergic reactions, worsen the air environment in the room.

1. In the list household goods there are powders for getting rid of lime deposits based on phosphates, inorganic acids: "Optimum Plus", "Calgon", "Fresh", "Frau Schmidt".
2. Means "Antinakipin" differs from "Aqualon" in an improved formula with a reduced content of phosphates, scale dissolves quickly. Affordable, cost effective.
3. Scale cleaner Filtero presented in liquid and granular forms. Gently eliminates light plaque, effective in complex hard deposits.
4. Firm "Scamwon" produces compressed tablets to combat lime stone. It is recommended to use the product for prevention, cleaning surfaces, and removing sediment.
5. Industrial acids are called upon to prevent the formation of scale, remove plaque: formic, phosphoric. Creating an acidic environment when washing heating equipment avoids serious mineral deposits on the walls and coils. In combination with periodic flushing, these methods give a stable result.

Folk

Cleaning methods with vinegar, citric acid, boric solution gained popularity due to efficiency, economy. The ingredients are easy to get at a hardware store or pharmacy.

1. We prepare the composition: distilled water - 1 l, vinegar essence 3-5 tablespoons. Pour acid into water, cover the heating element completely with liquid, leave for 40–60 minutes in solution.
2. Resists minor deposits lemon juice: 2 tablespoons are applied directly to the surface to be cleaned, washed off with running water after 10-20 minutes.
3. The hardened layer will remove the boil along with the lemon: two citruses will go to a teapot from 1 to 2 liters. Cut into 4 pieces separate container, manually squeeze the juice, transfer all the contents, together with the zest, into a vessel to be cleaned. Top up with water to the upper mark, bring to a boil, leave to cool. Clean off softened plaque.
4. Crystalline citric acid resists scale: diluted in proportion: 60 g of lemon per ½ liter of boiled water room temperature. Stir until completely dissolved. Immerse in solution problematic details for 10-12 hours or boil for 20 minutes.
5. soften lime deposits soda will allow: ½ pack of sodium bicarbonate is diluted in a liter of boiling water. Fill the surface requiring cleaning. Take off after 30 minutes mechanically deposits using a brush.
6. Potato, apple, pear peels also contain acid and starch: the mixture is brewed right inside the kettle. Insist for at least 30 minutes. Wash away clean water, cleaning the plaque.
7. The brine after vegetables is rich in organic acids, it is not necessary to dilute: they fill in problem areas, heat them in a vessel or preliminarily, wait until they cool completely. Remove the softened sediment.
8. Carbonated drinks "Cola" or "Sprite" will help remove scale. Method without heating: pour into a vessel to the level of a layer of plaque, wait from 4 to 12 hours.
9. Spoiled milk. The recipe for the most gentle cleaning: sour milk at an early stage without a clot is poured into a kettle. Boil and let cool to room temperature. Drain the liquid along with contaminants.

Rules for cleaning a metal kettle

To efficiently remove scale from metal walls, remember the rules:

• The best remedy is prevention.
• When cleaning, do not damage the surface of the material, leave scratches, chips. In them, salts and bacteria will firmly settle, cleaning will become daily.
• Substances that are not marked "for kitchen and food equipment" are not added inside the kettle.

The new device is washed with clean water, rinsed, after a month they look at its internal state:

• Use descaling agents once every 7-10 days.
• Coarse bristle brushes are preferred over wire brushes.
• Sponges with a rough coating are used with caution.
• Abrasives limit.

How to clean a metal electric kettle

Adequate care, timely cleaning, the use of soft water - allow you to save energy, keep the device working for a long time. To wash the scale in the electric kettle will allow a certain algorithm:

1. Household appliances are disconnected from the network, cooled in a natural way.
2. To quickly remove plaque inside the kettle, two approaches are used: mechanical and chemical. The first acts as an independent or complements the second.
3. To manually remove scale, brushes made of artificial bristles, plastic, silicone, and wood are used. It is important to clean the surface heating element so as to evenly remove plaque, being careful. Remaining deposits in the sections of the spiral will lead to uneven heating, energy waste, burnout of the device.
4. Don't scrub deposits sandpaper or a file, as there is a risk of damaging the metal surfaces. Layers in the process of further use will become more difficult to remove.
5. Under by chemical means understand the use of acids, solvents to dilute the slag. The measure, depending on the concentration of the solution, is of a regular preventive or urgent radical nature.
6. The electric kettle is equipped with a mesh in the spout area, which is designed to keep sediment from falling into the mug. The filter is washed regularly.
7. At the end of each cleaning, boil the water twice, draining it. Rinse with a running stream to remove acid residues.

Scale prevention and kettle maintenance

The damage from lime scale is difficult to overestimate:

• The harm to health is palpable.
• An increase in electricity consumption due to an increase in heating time.
• Heating element failure.
• The device snaps off the button, and boiling the liquid.
• The taste of drinks muddy water worse.

Prevention of limescale formation is known:

• Quality (filtered) water.
• Before boiling again, completely drain the remains from the kettle.
• Rinse the insides and filter mesh daily.
• Wash the walls with a sponge every morning.
• Once a month, clean with a specialized tool.
• Wash once a week in an acidic environment, rinsing thoroughly after.

Why does scale appear

The main reason for the appearance of insoluble plaque is the presence of calcium and magnesium ions in a natural source. When boiling, hardness salts form lime deposits.

It is easy to wash the scale in the electric kettle. They carefully monitor the condition of the internal walls, clean the plaque in a timely manner, and prevent the sediment from turning into stone.

Our tap water too hard, and therefore from time to time you have to look for ways to descale the electric kettle. Kettles must be cleaned regularly, because deposits of calcium and magnesium are harmful to health.

Scale in electrical appliances is very afraid of acids, and therefore all methods of its removal mainly come down to the use of products that contain acids. How to descale an electric kettle yourself?

A proven option on how to descale an electric kettle is to boil it with citric acid. 1 tbsp follows. l. Pour acids into the kettle, pour water into it and turn it on. When the water boils, it is drained and the appliance is thoroughly rinsed. Then put water to boil again.

As a result, the walls and heating elements will become perfectly clean, although there may be slight lime contamination on the bottom. Cleaning the kettle with citric acid is the most popular way.
You can remove plaque with ordinary lemon. Get some water, throw in a few slices of lemon and boil them. This is perhaps the most safe way cleaning the heating elements from plaque.

Soda

Easy to clean electric kettle baking soda. It is enough to fall asleep in the device 1 tbsp. l. soda and fill it with water. Then the device is turned on. After the water boils, it is drained and the equipment is thoroughly washed with running water.

If necessary, the softened dirt is cleaned with a sponge. It is advisable to boil the water 2 more times so that all the dirt is completely gone.

Vinegar

To clean the kettle in this way, fill it with water and add 100 ml of vinegar. Then the water is boiled and left for a couple of hours. If there is a lot of lime, then you can leave the solution all night. Then the acetic solution is drained, and the device is thoroughly washed.

The disadvantage of this method is a rather unpleasant acetic smell, which, during boiling, will spread throughout the apartment.

Lemonade

A good, tried-and-tested way to get rid of lime is to clean it with lemonade. It is important to choose colorless lemonade so that the drink does not stain the plastic.

The soda is shaken well and then boiled. After that, the lemonade is left to cool completely. Drinks contain phosphoric acid, which corrodes scale. In conclusion, we clean the equipment, rinse, and then boil again.

Oxalic acid

A little means is diluted in water and boiled. The solution must be left for a few minutes, and then it remains only to remove the remaining dirt with a sponge. You can also use fresh, raw sorrel, but since the concentration of acids in it is small, the procedure will have to be repeated.

apple peels

This method of cleaning electrical appliances is not so common, but still quite effective. But you will have to turn on the water several times. Cleanings are placed in the kettle, filled with water and boiled 2-3 times. Apple peels also contain acids, but not as strong as other methods.

Household chemicals

Today, a lot of products are sold with which you can easily remove scale from heating elements. strong household chemicals very quickly removes even the most persistent pollution. But after using these kitchen utensils needs to be washed very well. The device will have to be boiled with fresh water at least 3 times.

• Carry out cleaning work when there are no children at home. And if there are small children in the apartment, then carefully make sure that they do not prepare tea with harmful substances for themselves.
• After cleaning the equipment, the water in it must be boiled at least 2 times so that all harmful substances are gone.
• Do not use abrasives to clean the heating element, as this may damage the surface. Although you will remove the plaque in this way, the device may be damaged from the inside.
• Processing should be carried out once a month so that a thick layer of plaque does not form.
• Try to boil only filtered water. This will allow you to significantly extend the life of the equipment.

We hope that our advice will be useful to you, and you, listening to them, will properly clean kitchen utensils from scale and plaque. Compliance simple rules will allow you to keep the electric kettle in perfect cleanliness.